SWF TYPE. Round Flange Type. part number structure example SWSF 16 G UU. This type is an inch dimension series mainly used in the U.S.
|
|
- Ambrose George Byrd
- 6 years ago
- Views:
Transcription
1 SWF TYPE Round Flange Type This type is an dimension series mainly used in the U.S. part number structure example SWSF 16 G UU - SK specification SWF standard SWSF anticorrosion inner contact diameter retainer material blank steel G resin outer cylinder surface treatment blank no surface treatment SK electroless nickel plating RD Raydent treatment SB black oxide* SC industrial chrome plating *not available in SWSF type seal blank without seal UU seals on both sides part number standard anticorrosion steel retainer resin retainer stainless retainer resin retainer SWF 4 SWF 4G SWSF 4 SWSF 4G SWF 6 SWF 6G SWSF 6 SWSF 6G SWF 8 SWF 8G SWSF 8 SWSF 8G SWF1 SWF1G SWSF1 SWSF1G SWF12 SWF12G SWSF12 SWSF12G SWF16 SWF16G SWSF16 SWSF16G SWF2 SWF2G SWSF2 SWSF2G SWF24 SWF24G SWSF24 SWSF24G SWF32 SWF32G SWSF32 SWSF32G SWF4 SWF48 SWF dr /m D /m L D-1
2 SLIDE GUIDE mounting holes x 4 BALL SPLIE ROTARY BALL SPLIE TOPBALL PRODUCTS SLIDE BUSH SLIDE UIT major dimensions Df t flange P.C.D XYZ eccentricity m D-11 perpendicularity m basic load rating dynamic C ,57 2,18 3,82 4,7 7,35 14,1 Co ,18 1,37 1,57 2,74 4,2 7,94 1, 16, 34,8 mass g ,1 1,76 3,57 5,6 12, shaft diameter 1/ /8 1/ /8 3/ / / / lbs1kg2.lbs STROKE BUSH SLIDEROTARYBUSH SLIDE SHAFT SLIDE WAY SLIDE TABLE GOIO WAY ACTUATOR SLIDE SCREW
3 SWK TYPE Square Flange Type This type is an dimension series mainly used in the U.S. part number structure example SWSK 16 G UU - SK specification SWK standard SWSK anticorrosion inner contact diameter retainer material blank steel G resin outer cylinder surface treatment blank no surface treatment SK electroless nickel plating RD Raydent treatment SB black oxide* SC industrial chrome plating *not available in SWSK type seal blank without seal UU seals on both sides part number standard anticorrosion steel retainer resin retainer stainless retainer resin retainer SWK 4 SWK 4G SWSK 4 SWSK 4G SWK 6 SWK 6G SWSK 6 SWSK 6G SWK 8 SWK 8G SWSK 8 SWSK 8G SWK1 SWK1G SWSK1 SWSK1G SWK12 SWK12G SWSK12 SWSK12G SWK16 SWK16G SWSK16 SWSK16G SWK2 SWK2G SWSK2 SWSK2G SWK24 SWK24G SWSK24 SWSK24G SWK32 SWK32G SWSK32 SWSK32G SWK4 SWK48 SWK dr /m D /m L D-12
4 D-13 SLIDE GUIDE BALL SPLIE ROTARY BALL SPLIE TOPBALL PRODUCTS SLIDE BUSH SLIDE UIT STROKE BUSH SLIDEROTARYBUSH SLIDE SHAFT SLIDE WAY SLIDE TABLE GOIO WAY ACTUATOR SLIDE SCREW 1.2lbs1kg2.lbs shaft diameter basic load rating perpendicularity major dimensions mass dynamic eccentricity flange g Co C m m XYZ P.C.D. t K Df 1/ / / / , / , , / ,74 1, / ,2 2, ,58 7,94 3, / ,2 1, 4, , 16, 7, ,3 34,8 14, attachment holes x 4
5 SWF-W TYPE Round Flange Double-Wide Type This type is an dimension series mainly used in the U.S. part number structure example SWSF 16 G W UU - SK specification SWF standard SWSF anticorrosion inner contact diameter retainer material blank steel G resin double-wide type outer cylinder surface treatment blank no surface treatment SK electroless nickel plating RD Raydent treatment SB black oxide* SC industrial chrome plating *not available in SWSF type seal blank without seal UU seals on both sides part number standard anticorrosion steel retainer resin retainer stainless retainer resin retainer SWF 4W SWF 4GW SWSF 4W SWSF 4GW SWF 6W SWF 6GW SWSF 6W SWSF 6GW SWF 8W SWF 8GW SWSF 8W SWSF 8GW SWF1W SWF1GW SWSF1W SWSF1GW dr /m D /m L SWF12W SWF16W SWF12GW SWF16GW SWSF12W SWSF16W SWSF12GW SWSF16GW SWF2W SWF24W SWF32W SWF2GW SWF24GW SWF32GW SWSF2W SWSF24W SWSF32W SWSF2GW SWSF24GW SWSF32GW D-16
6 SLIDE GUIDE mounting holes x 4 BALL SPLIE ROTARY BALL SPLIE TOPBALL PRODUCTS SLIDE BUSH SLIDE UIT major dimensions Df t flange P.C.D..875 XYZ eccentricity m perpendicularity m basic load rating dynamic C 323 Co 53 allowable moment Mo m 2. mass g 4 shaft diameter 1/ STROKE BUSH SLIDEROTARYBUSH , ,57 2, /8 1/ /8 SLIDE SHAFT ,37 2, / ,57 2,5 3,43 3,14 5,49 8, ,2 1, / / SLIDE WAY SLIDE TABLE GOIO WAY D ,8, , lbs1m.738lbft ACTUATOR SLIDE SCREW
7 SWK-W TYPE Square Flange Double-Wide Type This type is an dimension series mainly used in the U.S. part number structure example SWSK 16 G W UU - SK specification SWK standard SWSK anticorrosion inner contact diameter retainer material blank steel G resin double-wide type outer cylinder surface treatment blank no surface treatment electroless nickel plating raydent treatment SK RD SB SC black oxide* industrial chrome plating *not available in SWSK type seal blank without seal UU seals on both sides part number standard anticorrosion steel retainer resin retainer stainless retainer resin retainer SWK 4W SWK 4GW SWSK 4W SWSK 4GW SWK 6W SWK 6GW SWSK 6W SWSK 6GW SWK 8W SWK 8GW SWSK 8W SWSK 8GW SWK1W SWK1GW SWSK1W SWSK1GW dr /m D /m L SWK12W SWK16W SWK12GW SWK16GW SWSK12W SWSK16W SWSK12GW SWSK16GW SWK2W SWK24W SWK32W SWK2GW SWK24GW SWK32GW SWSK2W SWSK24W SWSK32W SWSK2GW SWSK24GW SWSK32GW D-18
8 SLIDE GUIDE mounting holes x 4 BALL SPLIE ROTARY BALL SPLIE TOPBALL PRODUCTS SLIDE BUSH SLIDE UIT Df major dimensions K t flange P.C.D XYZ eccentricity D-19 m perpendicularity dynamic basic load rating m C ,23 1,37 1,57 2,5 3,43 6,8 Co ,57 2,35 2,74 3,14 5,49 8,4,9 allowable moment Mo m mass g ,46 2,62 shaft diameter 1/ /8 1/ /8 3/ / / lbs1m.738lbft STROKE BUSH SLIDEROTARYBUSH SLIDE SHAFT SLIDE WAY SLIDE TABLE GOIO WAY ACTUATOR SLIDE SCREW
9 SWFC TYPE Center Mount Round Flange Type This type is an dimension series mainly used in the U.S. part number structure example SWSFC 16 G UU - SK specification SWFC standard SWSFC anticorrosion inner contact diameter retainer material blank steel G resin outer cylinder surface treatment blank no surface treatment SK electroless nickel plating RD Raydent treatment SB black oxide* SC industrial chrome plating *not available in SWSFC type seal blank without seal UU seals on both sides part number standard anticorrosion steel retainer resin retainer stainless retainer resin retainer SWFC 4 SWFC 4G SWSFC 4 SWSFC 4G SWFC 6 SWFC 6G SWSFC 6 SWSFC 6G SWFC 8 SWFC 8G SWSFC 8 SWSFC 8G SWFC1 SWFC1G SWSFC1 SWSFC1G dr /m D /m L SWFC12 SWFC16 SWFC12G SWFC16G SWSFC12 SWSFC16 SWSFC12G SWSFC16G SWFC2 SWFC24 SWFC32 SWFC2G SWFC24G SWFC32G SWSFC2 SWSFC24 SWSFC32 SWSFC2G SWSFC24G SWSFC32G D-11
10 SLIDE GUIDE mounting holes x 4 BALL SPLIE ROTARY BALL SPLIE TOPBALL PRODUCTS SLIDE BUSH SLIDE UIT major dimensions flange Df t P.C.D XYZ eccentricity m perpendicularity m basic load rating dynamic C Co allowable moment Mo m 2. mass g 4 shaft diameter 1/ STROKE BUSH SLIDEROTARYBUSH , ,57 2, /8 1/ /8 SLIDE SHAFT ,37 2, / ,57 2,5 3,43 3,14 5,49 8, ,2 1, / / SLIDE WAY SLIDE TABLE GOIO WAY D ,8, , lbs1m.738lbft ACTUATOR SLIDE SCREW
11 SWKC TYPE Center Mount Square Flange Type This type is an dimension series mainly used in the U.S. part number structure example SWSKC 16 G UU - SK specification SWKC standard SWSKC anticorrosion inner contact diameter retainer material blank steel G resin outer cylinder surface treatment blank no surface treatment SK RD SB SC electroless nickel plating Raydent treatment black oxide* industrial chrome plating *not available in SWSKC type seal blank without seal UU seals on both sides part number standard anticorrosion steel retainer resin retainer stainless retainer resin retainer SWKC 4 SWKC 4G SWSKC 4 SWSKC 4G SWKC 6 SWKC 6G SWSKC 6 SWSKC 6G SWKC 8 SWKC 8G SWSKC 8 SWSKC 8G SWKC1 SWKC1G SWSKC1 SWSKC1G dr /m D /m L SWKC12 SWKC16 SWKC12G SWKC16G SWSKC12 SWSKC16 SWSKC12G SWSKC16G SWKC2 SWKC24 SWKC32 SWKC2G SWKC24G SWKC32G SWSKC2 SWSKC24 SWSKC32 SWSKC2G SWSKC24G SWSKC32G D-112
12 SLIDE GUIDE mounting holes x 4 BALL SPLIE ROTARY BALL SPLIE TOPBALL PRODUCTS SLIDE BUSH SLIDE UIT major dimensions flange Df K t P.C.D..875 XYZ perpendicularity basic load rating dynamic eccentricity C Co m m allowable moment Mo m 2. mass g 33 shaft diameter 1/ STROKE BUSH SLIDEROTARYBUSH , ,57 2, /8 1/ /8 SLIDE SHAFT ,37 2, / ,57 2,5 3,43 3,14 5,49 8, , / / SLIDE WAY SLIDE TABLE GOIO WAY D ,8, , lbs1m.738lbft ACTUATOR SLIDE SCREW
SM 3 SM 3G SMS 3 SMS 3G
SM TYPE Standard Type This type is a metric dimension series widely used in Japan and other countries. part number structure example SMS 2 G UU - P specification SM standard SMS anticorrosion inner contact
More informationSV TYPE SV1/SV2. part number structure example H-8. rollers. number of rollers. stroke diameter. part number 1.5
SV TYPE SV1/SV2 part number structure example SVS 2 6 - RAS 2Z - UP accuracy grade specification blank high SV standard P precision SVS anticorrosion UP high-precision number of rollers cage type blank
More informationSAMICK LINEAR BUSHING
Linear Bushing SAMICK LINEAR BUSHING SAMICK Linear Bushing, LM type is the linear motion system with unlimited stroke by applying with LM shaft. Because of the point contact between Balls and LM shaft,
More informationF-1 SLIDE GUIDE STROKE BALL SPLINE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDE ROTARY BUSH STROKE BUSH SLIDE SHAFT
SLIDE GUIDE BALL SPLIE ROTARY BALL SPLIE STROKE BALL SPLIE TOPBALL PRODUTS SLIDE BUSH SLIDE UIT SLIDE WAY/GOIO WAY MIIATURE SLIDE F- ATUATOR SLIDE SREW The B stroke bush is a linear and rotational motion
More informationE-1 SLIDE GUIDE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDEROTARYBUSH STROKE BUSH SLIDE SHAFT SLIDE TABLE GONIO WAY
SLIDE GUIDE BALL SPLINE ROTARY BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT STROKE BUSH SLIDEROTARYBUSH SLIDE SHAFT SLIDE WAY SLIDE TABLE GONIO WAY E-1 ACTUATOR SLIDE SCREW Table E-1 A wide variety
More informationSSP TYPE. Cylindrical Spline Nut. part number structure B-16. When two spline nuts are used in close contact. major dimensions part number
SSP TYPE Cylindrical Spline Nut structure example SSP 8 - - T1 - - P / CU SSP type nut length blank standard long number of nuts attached to one shaft with special specification accuracy grade blank high
More informationGM (single type) GM-W (double-wide type) GMF-W (round flange double-wide type)
Nippon Bearing has expanded the new generation GM Slide Bush series to now include the popular ouble-ide and Flange Types to provide an even wider selection of products. GM (single type) GM- (double-wide
More informationSSP TYPE. Toll Free: Fax: Cylindrical Spline Nut. 777 Schwab Road, Suite T, Hatfield, PA part number structure
SSP TYPE Cylindrical Spline Nut structure example SSP 8-2 - T1 - - P / CU SSP type nut length blank standard long number of nuts attached to one shaft with special specification accuracy grade blank high
More informationfor YOU and YOUR customer by SAMICK . (499) CATALOG NO. 1601E
. (499) 73-35-48 e-mail: samick-mail@ya.ru for YOU and YOUR customer by SAMICK CATALOG NO. 161E . (499) 73-35-48 e-mail: samick-mail@ya.ru The copyright of the contents of this publication is obtained
More informationLinear actuators ATL Series
. TECHNICAL DATA - acme screw linear actuators ATL Series ATL 63 ATL 80 ATL 100 ATL 15 SIZE 50 60 90 100 150 Push rod diameter [mm] 70 90 115 150 00 Outer tube diameter [mm] 30 35 40 60 80 Front attachment
More informationLinear Bushing General Catalog
General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the... Structure and features... Dedicated Shafts for Model LM... Standard
More informationLinear Bushing. General Catalog A-523
Linear Bushing General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the Linear Bushing... Structure and features... Dedicated Shafts
More informationfor YOU and YOUR customer LINEAR BUSHING by SAMICK CATALOG NO. 1501E
for YOU and YOUR customer LINER BUSHING by SMICK CTLOG NO. 151E The copyright of the contents of this publication is obtained by SMICK Precision Ind. Co., Ltd. Every care has been taken to ensure the contents
More informationLinear actuators ILA Series
Linear Actuator ILA Series without input drive, with flange and input shaft Linear Actuator ILA Series with input drive - with 2 bevel gearmotors - with single bevel gearmotor - with helical coaxial or
More informationBALL SPLINE ROTARY BALL SPLINE STROKE BALL SPLINE BALL SCREW SPLINE
ROTARY STROKE BALL SCREW SPLINE STRUCTURE AND ADVANTAGES B- TYPES B- ACCURACY B- PRELOAD AND CLEARANCE IN ROTATIONAL DIRECTION B- STRENGTH OF SPLINE SHAFT B- LOAD RATING B- CALCULATION OF DEFLECTION AND
More informationMeridian TM EC and DRC Series. Pneumatic Actuators
Meridian TM EC and DRC Series Pneumatic Actuators The Meridian TM Pneumatic Actuator DRC Series Features & Benefits: The Meridian TM Pneumatic Actuator has proven to be the most reliable actuator by providing
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders without through-hole in their product range. hydraulical
More informationSpring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in.
Algas Spring Return Pneumatic Actuator Scotch Yoke Design Spring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in. Features and benefits Scotch yoke design generates high
More informationAir Gripper (2 Finger) (3 Finger)
Rotary Actuated Air Gripper ( Finger) (3 Finger) MHR/MDHR, MHR3/MDHR3 High Precision - Repeatability ±0.01mm Parallel opening and closing mechanism utilizing a cross roller guide produces smooth operation
More informationWBK 08 S - 01 A WBK 25 DF - 31H. Accessories. (For light load) (For high speed and heavy load) 3. Reference number coding
3. Reference number coding (For light load) xample: Product code for support unit ominal size code * WK 8 S - 1 ounting code o code: Fixed support unit S: Simple support unit SF: Simple support unit (for
More informationACTUATORS GENERAL CATALOG
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS VANE TYPE SERIES CONTENTS RAN (Standard Type) Basic Model and Configuration 259 Specifications 26 Order Codes 264 Dimensions
More informationHigh Power. EZA Series. High Thrust Force. Large Transportable Mass. Motorized Cylinders. Features
Motorized Cylinders For details on this product please refer to our website, contact technical support or your nearest Oriental Motor sales office. These motorized cylinders have a built-in LM guide. Greater
More informationSTANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES
STANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES STANDARD SPECIFICATION BALL VALVE STRAIGHT- THROUGH TYPE 301K SERIES GENERAL The 301K series provides ball valves with a special inner
More informationSupport Units. FA Units
Support Units FA Units Sungil Support Units EK, EF Type Support Units BK, BF Type Support Units AK, AF Type Support Units FK, FF Type Support Units Support Units Sungil Support Units Lock Nut Joint Unit
More informationblac inc. : 04 : 15 ROTARY ACTUATOR ECF/ SSF SERIES
blac inc. : 0 : ROTARY ACTUATOR ECF/ SSF SERIES ECF SERIES ACTUATORS WITH INNOVATIVE DESIGN, BLAC INC. BRINGS COMPACT EXTRUDED, ALUMINUM HARD... Double rack and pinion construction Hard anodized body providing
More informationActuator specifications
Direct drive actuator compatible type X4000G Series Compatible with large load moment of inertia Compatible function with free driver, actuator, and cable combinations Different options including hollow
More informationNSK Standard Ball Screws High Speed SS Series
NSK Standard Ball Screws igh Speed SS Series NSK s high speed and low noise ball screws provide high-level performance for drive systems of industrial machines such as those used in manufacturing. standard
More information6. Selection graph of POWER BASE
6. Selection graph of POWER BASE FOR LIGHT DUTY FOR HEAVY DUTY Graph the method which it sees Specification Selecting method 1. Weight : 800Kg Looking at IP1500 model on graph, the intersection point islocated
More informationThe Solution For The Valve Problems Plug Valves
www.3zvalve.com The Solution For The Valve Problems Plug Valves CONTENTS The Solution For The Valve Problems Plug Valves DBB Group Double Block & Bleed Valves 5 Soft Seated Group Sleeved Valves 23 Lined
More informationKeystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
More informationSTANDARD COMPONENTS STANDARD
US STANDARD COMPONENTS Housing in reinforced polyamide (Housing in reinforced polypropylene available on request). Adjustable chrome steel or stainless steel ball bearing, pre-lubricated. Can be re-lubricated
More informationGuide Table. ø40, ø63, ø100
Guide Table Series MGF ø, ø, ø Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder
More informationSERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET
SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationLinear actuators ATL Series
. TECHNICAL DATA - acme screw linear actuators ATL Series SIZE ATL 0 ATL 5 ATL 8 ATL 30 ATL 40 Push rod diameter [mm] 5 30 30 35 40 Outer tube diameter [mm] 36 45 45 55 60 Front attachment diameter [mm]
More informationGuide Table. MGF Series
Guide Table MGF Series ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder
More informationSecurity Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
More informationECF/SSF : 08 : 11 SIL3
ECF/SSF : 0 : SIL WITH THE TRADITION OF CONSTANT INNOVATION AND VIRTUE IN ENGINEERING, ROTEX... BODY DOUBLE RACK AND PINION ACTUATOR SERIES ECF Double rack and pinion construction Hard anodized body providing
More informationAutomation for a Changing World. Delta Planetary Gearbox PS High Precision Series.
Automation for a Changing World Delta Planetary Gearbox PS High Precision Series www.deltaww.com PS Series Planetary Gearbox PS High Precision Series The PS Series Planetary Gearbox features many advantages
More informationGuide Table. Series MGF
Guide Table Series MGF ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder
More information3-Position Rotary Table
-osition Rotary Table Series CR1 Stop position adjustment range From center: Rotation range: 0 to 9 The desired position is adjustable to between 0 and 9 from the centered position to both the right and
More informationRotary Actuated Air Gripper
Rotary ctuated ir Gripper MHR, MDHR/MHR3, MDHR3 -finger type: Size, 15,, 3/ 3-finger type: Size, 15 High Precision - Repeatability ±.1 mm Parallel opening and closing mechanism utilizing a cross roller
More informationDouble Acting (air to air) and Single Acting (spring return), 90 operation, pneumatic actuators.
Double Acting (air to air) and Single Acting (spring return), 90 operation, pneumatic actuators. General Applications For remote control of any quarter turn application, for example Ball, Butterfly or
More informationServomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA
1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor
More informationACTUATORS GENERAL CATALOG
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS PISTON TYPE SERIES CONTENTS Features 1223 Specifications 1224 Inner Construction, Major Parts and Materials 1226 Order
More information10 million cycles. Improved durability. Shock Absorber/Soft type. RJ Series. Maximum operating cycles M6, M8, M10, M14, M20, M27
Shock Absorber/Soft type Series M, M, M, M, M, M Improved durability RoS Long-term continuous operation has been realized by employing the pre-load mechanism, newly-developed oil seals. Maximum operating
More information3-Position Rotary Table
-osition Rotary Table Series Stop position adjustment range From center: Rotation range: 0 to 9 The desired position is adjustable to between 0 and 9 from the centered position to both the right and left
More informationBULLTIN B PISTON ACTUATOR. The Actuator that Delivers Maximum Torque for Minimum Air Consumption
BULLTIN B60 PISTON ACTUATOR The Actuator that Delivers Maximum Torque for Minimum Air Consumption TABLE OF CONTENTS: COMPACT DESIGN PRINCIPLE OF OPERATION PARTS LIST MAIN FEATURES TORQUEMETRIC TORQUEIMPERIAL
More informationHigh Rigidity Radial Cylinder Type. Ball circulating type built-in linear guide has evolved into a 4-row guide! The era of built-in guides has begun.
High Rigidity Radial Cylinder Ball circulating type built-in linear guide has evolved into a 4-row guide! The era of built-in guides has begun. EC-RR H EC-RR7 H Use 4-row guide. 1Point 2-row linear guide
More informationLINEAR BEARINGS & HOUSINGS
LINEAR BEARINGS & HOUSINGS www.euro-bearings.com Tel. 01908 511733 email: sales@euro-bearings.com GENERAL INFORMATION Introduction Ball bushings are anti-friction bearings for linear motion. They offer
More informationHigh Pressure Ball Valves Series BVAH. General Description. Operating. Specifications. Features. Performance Curves
Technical Information General Description are 414 Bar (6000 PSI) ball valves with ports from 1¼" to 2". are 2-way shut-off valves to use in those applications with large ports. A variety of porting options
More informationCaged Ball LM Guide Actuator SKR
Caged Ball LM Guide Actuator SKR For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.309-11E Integrated LM Guide and Ball Screw High-rigidity /
More informationKeystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
More informationKEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
More informationCAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:
CAT.ES-3 E Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating
More informationTS / CT TS / CT Ⅱ 195 Ⅱ 196
19 196 Precision Positioning Table Ball screw TS Slide table Ball screw Linear Points Crossed Roller Way 1 High precision and compact positioning table slide tables and beds. High precision and compact
More informationPrecision Lead Screws
Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017
More informationTRACK GUIDANCE SYSTEMS
EURO-BEARINGS LTD TRACK GUIDANCE SYSTEMS www.euro-bearings.com Tel. 01908 511733 email: sales@euro-bearings.com INTRODUCTION EURO-BEARINGS LTD www.euro-bearings.com Tel. 01908 511733 This linear guidance
More informationTrack Rollers/ Cam Followers
Track Rollers/ Cam Followers Page Nomenclature...................................... 460 Introduction....................................... 462 Identification....................................... 462
More informationType V Pneumatic actuator
Type V Pneumatic actuator Application Single- or double-acting piston actuator for butterfl y valves and other fi nal control elements with rotary closure members Operating media Dry or lubricated air
More informationMiniature Guide Rod Cylinder ±0.1. Mounting from 2 directions
Miniature Guide Rod Cylinder Series Non-rotating accuracy : Height ±0.1 Mounting from 2 directions idth Overall length Two auto switches can be mounted even for mm strokes Integral wiring/piping to one
More informationSERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.
1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,
More informationThe Block Structure. Linear block SBG, SBS, SPG and SPS types are available. All blocks are dimensionally interchangeable.
Circular arc groove Two pint contact structure of circular arc groove. It keeps the function of self-aligning and smooth rolling performance. 45 angle of contact Four rows of circular arc groove contact
More informationInformation. Electric Slide Table/In-line Motor Type. Series LESH D. In-line motor type newly added to electric slide table! Reduced cycle time
Information Electric Slide Table/In-line Motor Type Series ESHD In-line type newly added to electric slide table! Width dimension shortened by up to % kihabara UDX F, --, Sotokanda, Chiyoda-ku, Tokyo 0-00,
More informationRotary Table/Vane Style
Rotary Table/Vane Style Series Size: 1, 3, 7, 20 Table top deflection mm or less High Precision Peripheral table deflection mm or less X Series B Series A 147 Rotary Table Values inside ( ) are for Series
More information(Group 6) Steering. Illustration A Illustration B Illustration C Illustration D Illustration E. Illustration H
(Group 6) Steering Buick used two types of steering linkages from 1961-1967, Saginaw and Thompson (Alternate). Saginaw original equipment can be identified by having a plastic plate, or a small "s" stamped
More informationM24X
Rod Ends Female Self-aligning bearing used for control linkages. Able to take tensile and compressive loads, steel on composite, complete with lubricating nipple. Body: Carbon steel S45C (C45 Din) Ball:
More information3-Position Rotary Table
3-osition Rotary Table Series :,,, Stop position adjustment range From center: ± Rotation range: The desired position is adjustable to between 0 and 95 from the centered position to both the right and
More informationCompact Slide. Series MXH ø6, ø10, ø16, ø20
Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations
More informationInformation. Model LEYG16 LEYG25 LEYG32
Information A rod type with guide newly added! Compatible with slide-bearing and ball-bushing bearing. Compatible with moment load and stopper (slide bearing). Speed control/positioning: ax. points Positioning
More informationDouble-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationMZ series. MZ 40/60/80/100-D (costomized type) Slider on the top and bottom
MZ series Application with various axis combination is available Long life time Easy mounting with various mounting holes Built-in stainless steel cover for dust proof MZ /// Standard slider block * Various
More informationInner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR
LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing
More informationPrecision Miniature Ball Screw
Brief introduction of Precision Miniature Ball Screw Precision Miniature ball screw assemblies are conventionally understood to be systems with a nominal diameter of 16mm or less. Their miniaturized nut
More informationInformation. Electric Actuator/Rod Type. Added size 63 to the LEY series! Series LEY AC Servo Motor (400 W) Size: 63. RoHS
Information SC Corporation Akihabara UDX 1F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 1-21, JAPAN http://www.smcworld.com 12 SC Corporation All Rights Reserved Electric Actuator/Rod Type Series EY AC Servo
More informationSKF Inch Linear Bearing Series
SKF Inch Linear Bearing Series Quick-ship Easy Serve Program from SKF Precision ground shaft Class L precision ground shaft from 1/4'' to 2'' Same day shipment 1-1 pieces (Order received by 12:N EST) 1-2
More information12.5 Ball Chain Type, SME Series
12.5 Ball Chain Type, SME Series A. Construction Carriage End Cap End Seal Grease Nipple Inner Seal Ball Bottom Seal Ball Chain 45 Rail 45 B. Characteristics The ball chain type linear guideway, SME series,
More informationRSR-M1. LM Guide High Temperature Type Model RSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide High Temperature Type Model Endplate SUS34 LM block THK EX5 End seal (High temperature rubber) LM rail THK EX5 Ball SUS44C Grease nipple SUS34 Point of Selection A Point of Design Options Model
More informationHEAVY DUTY WORM GEARBOX MODEL SBWG
FEATURES AND BENEFITS The SBWG model is suitable for use with Butterfly, Plug and any other type requiring quarter turn motion for thrust and torque applications High Tensile Aluminium bronze material
More informationA comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves
KEYSTONE A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves Features Direct mounting to all Keystone butterfly
More informationHSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide High Temperature Type Model Endplate SUS304 End seal (High temperature rubber material) LM THK-EX50 Ball SUS440C Side seal (High temperature rubber material) LM rail THK-EX50 Cross section 45
More informationUnder our new brand, we will support the advancement of industry through developing precision technologies.
Under our new brand, we will support the advancement of industry through developing precision technologies. KUROD PRECISION INDUSTRIES LTD. was established as a gauge manufacturer in 1925. ased on its
More informationaluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm)
Technical Data Versions for pneumatic linear drive: Series OSP-P aluminum guide carriage Roller Guide Powerslide Loads, Forces and Moments aluminum clamping rail hardened steel rail roller cover with wiper
More informationHepcoMotion. Ball Bushings.
HepcoMotion Ball Bushings www.hepcomotion.com Contents HepcoMotion Super Ball Bushings 1 HepcoMotion Standard Ball Bushings 1 SBE Closed Super Ball Bushing 2 SBEO Open Super Ball Bushing 3 CS Closed Pillow
More informationA rectilinear rotation unit that compactly integrates a slim cylinder and a rotary actuator.
Rotary Cylinder MRQ Series :, A rectilinear rotation unit that compactly integrates a slim cylinder and a rotary actuator. The timing of the rectilinear and rotational movements can be set as desired.
More informationQuad4 Pneumatic Actuators
The SVF Quad4 TM quarterturn rack & pinion actuator is a four piston actuator which generates torque around a centrally located pinion, giving more than double the torque of single & double rack & pinion
More informationKNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
More informationENGINE MECHANICAL <134>
11A-1 GROUP 11A ENGINE MECHANICAL CONTENTS GENERAL INFORMATION........ 11A-2.................. 11A-3 11A-2 The newly developed 1.1L 134910 engine features 3-cylinder, 12-valve, and double overhead
More informationBESTSELLER. Linear bushings. Product properties:
are reliable and cost-efficient bearings based on the roller bearing principle. Hereby, the balls move along an internal track on the load side, and then return via a return track resulting in an overall
More informationLinear Shafting. Motion Control Products For Industrial Automation. Contact us at: PH: (330) FAX: (330)
Linear Shaftin Motion Control Products For Industrial Automation Contact us at: PH: (33) 847 7 FAX: (33) 847 528 www.eshaft.com For over two decades, Technico has been a leader in the motion control industry.
More informationMULTI SLIDERS CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features 923 Handling Instructions and Precautions 925 Specifications 929 Order Codes 930 Inner Construction 931 Dimensions 932
More informationhighlights Double tube linear actuators
highlights GN 491 with right or left hand thread, single slider 3 Type R1 Right hand thread, single shaft end R2* Right hand thread, two shaft ends L1* Left hand thread, single shaft end L2* Left hand
More informationSPN II. S h a r p e T o l l Free (877) F a x (708)
SPN II S h a r p e T o l l Free (877) 774-2773 F a x (708) 562-9250 www.sharpevalves.com 1 SPN II Pneumatic Actuator Rack & pinion design The standard actuator configuration has hard anodized aluminum
More informationInformation. Electric Slide Table/In-line Motor Type. Series LESH D. In-line motor type newly added to electric slide table!
Information kihabara UDX F, --, Sotokanda, Chiyoda-ku, Tokyo 0-00, PN UR http://www.smcworld.com 0 SMC Corporation ll Rights Reserved Electric Slide Table/In-line Motor Type Series ESHD In-line type newly
More informationThe series 10 butterfly valves has been developed for a large number of applications throughout process industries. The
Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating JIS 20K General : The series 10 butterfly valves has been developed for a large number of applications throughout
More informationwww.motiontech.com.au Copyright SERVOMECH This catalogue contents are under publisher copyright and may not be reproduced unless permission is agreed. Every care has been taken to ensure the accuracy of
More informationTKC / size : 40, 45, 50, 60, 80, 120, 140mm
TKC / size : 40, 45, 50, 60, 80, 120, 140mm Precise positioning control Hydraulic system replacement Applications : Electric press, electric lift, tilting, printing equipment, alignment equipment, automobile
More informationBALL SCREW LINEAR ACTUATOR OVERALL DIMENSIONS LENGTH
BALL SCREW LINEAR ACTUATOR BSA 2 OVERALL DIMENSIONS Stroke La =Lc + Stroke Lc T Capacitor Rear bracket Pin SP Standard head with threaded hollow bore BA depth 7 Stroke end reed switches FCM (brake motor)
More informationQuad4 Pneumatic Actuators High Performance, Four Piston, Rack & Pinion Actuators
The SVF Quad TM quarterturn rack & pinion actuator is a four piston actuator which generates torque around a centrally located pinion, giving more than double the torque of single & double rack & pinion
More informationKTM. Enhanced, proven design offers both control and block valve functions
KTM Enhanced, proven design offers both control and block valve functions Features Unique dual-v ball features a secondary (Small) V-notch allowing extremely small, accurate flow rates The primary (Large)
More information502 brass ball valve with ADA pneumatic actuator
502 brass ball valve with ADA pneumatic actuator MAIN CHARACTERISTICS The 502 valve is a brass ball valve dedicated to the automatic shut off of lines of standard fluids like water or air. With chromed
More information