STANDARD COMPONENTS STANDARD
|
|
|
- Posy Perkins
- 6 years ago
- Views:
Transcription
1 US STANDARD COMPONENTS Housing in reinforced polyamide (Housing in reinforced polypropylene available on request). Adjustable chrome steel or stainless steel ball bearing, pre-lubricated. Can be re-lubricated by means of grease-nipple or a quick coupler. Ball-type grease-nipple or quick coupler from nickel plated brass (available upon request) to take semi-rigid hoses ø 4 mm in Rilsan (see accessories on page 110). Version with stainless steel bearing has a stainless steel grease nipple. Clip-on safety cap (accessory). Polyethylene washer for grease-nipple. Heavy duty O-Ring. External housing in stainless steel AISI 304-DIN Reinforced polypropylene housing. Ball type grease nipple in stainless steel. TECHNICAL INFORMATION for US Resistance to corrosion: - Exellent resistance to highly corrosive chemicals such as acids, organic liquids, detergents. High load capacity. Continuous operating temperature: - From -20 C to +70 C. This version maintains good dimensional stability at the maximum indicated temperature. Economical operation: - Long life bearing insert. Self-alignment: - Max misalignment between shaft and housing: 0.5. Concept and design to meet all safety requirements. Interchangeable with standard cast iron flanged supports. Ball bearing pre-lubricated with long-life grease, which is ideal in applications in humid conditions, with water, alkaline or acid solutions. US STANDARD POLYAMIDE HOUSING accessory COLOUR Bearing support in black. Safety cap in yellow. For sufficient quantities parts can be produced in different colours. SEE ALSO... Accessories: p. 110 Features, lubrication and maintenance: p. 112 Mounting instruction: p Calculation of load capacity, bearing life: p Chemical resistance: p
2 US support without tongue version with grub screw support with tongue version with grub screw support without tongue version with eccentric ring support with tongue version with eccentric ring Accessories Ø d mm type dimension (mm) D E G H J Z T m n U V dynamic C (N) bearing load ratings static Co (N) closed safety cap open safety cap CHROME STEEL BEARING WITH GRUB SCREWS (POLYAMIDE) 30 UST 51206T M APE 30 USL 51206L M APE 30 USF 51206F M APE 30 USS 51206S M APE 40 UST 51208T 53 7 M APE 40 USL 51208L 53 7 M APE 40 USF 51208F 53 7 M APE 40 USS 51208S 53 7 M APE CHROME STEEL BEARING WITH ECCENTRIC RING (POLYAMIDE) 30 UST-B 51206TB M APE 30 USL-B 51206LB M APE 30 USF-B 51206FB M APE 30 USS-B 51206SB M APE 40 UST-B 51208TB M APE 40 USL-B 51208LB M APE 40 USF-B 51208FB M APE 40 USS-B 51208SB M APE * MAX. RADIAL LOAD CAPACITY OF HOUSING: Values indicated in the table above, are obtained at 23 C. Strength of housing indicated on page
3 US-R COMPONENTS Housing in reinforced polyamide (Housing in reinforced polypropylene available on request). Adjustable chrome steel or stainless steel ball bearing, pre-lubricated. Can be re-lubricated by means of grease-nipple or a quick coupler. Ball-type grease-nipple or quick coupler from nickel plated brass (available upon request) to take semi-rigid hoses ø 4 mm in Rilsan (see accessories on page 110). Version with stainless steel bearing has a stainless steel grease nipple. Clip-on safety cap. Polyethylene washer for grease-nipple. Rotary shaft seal ring with extra dust-protection lip in NBR rubber. Heavy duty O-Ring in NBR rubber. External housing in stainless steel AISI 304-DIN TECHNICAL INFORMATION for US-R Resistance to corrosion: - Exellent resistance to highly corrosive chemicals such as acids, organic liquids, detergents. High load capacity. Continuous operating temperature: - From -20 C to +70 C. This version maintains good dimensional stability at the maximum indicated temperature. Economical operation: - Long life bearing insert. Self-alignment: - Max misalignment between shaft and housing: 0.5. Concept and design to meet all safety requirements. Interchangeable with standard cast iron flanged supports. Completely sealed units. Ball bearing pre-lubricated with long-life grease, which is ideal in applications in humid conditions, with water, alkaline or acid solutions. US-R POLYAMIDE HOUSING accessory COLOUR Bearing support in black. Safety cap in yellow. For sufficient quantities parts can be produced in different colours. SEE ALSO... Accessories: p. 110 Features, lubrication and maintenance: p. 112 Mounting instruction: p Calculation of load capacity, bearing life: p Chemical resistance: p
4 US-R support without tongue version with grub screw support with tongue version with grub screw support without tongue version with eccentric ring support with tongue version with eccentric ring Ø d mm type version dimension (mm) closed open D E G H J Z T m n U V dynamic C (N) bearing load ratings static Co (N) CHROME STEEL BEARING WITH GRUB SCREWS (POLYAMIDE) 30 USFR 51206FR 56206FR M USSR 51206SR 56206SR M USFR 51208FR 56208FR 53 7 M USSR 51208SR 56208SR 53 7 M CHROME STEEL BEARING WITH ECCENTRIC RING (POLYAMIDE) 30 USFR-B 51206FRB 56206FRB M USSR-B 51206SRB 56206SRB M USFR-B 51208FRB 56208FRB M USSR-B 51208SRB 56208SRB M * MAX. RADIAL LOAD CAPACITY OF HOUSING: Values indicated in the table above, are obtained at 23 C. Strength of housing indicated on page
5 US CS STANDARD COMPONENTS Housing in reinforced polyamide (Housing in reinforced polypropylene available on request). Adjustable chrome steel or stainless steel ball bearing, pre-lubricated. Can be re-lubricated by means of grease-nipple or a quick coupler. Ball-type grease-nipple or quick coupler from nickel plated brass (available upon request) to take semi-rigid hoses ø 4 mm in Rilsan (see accessories on page 110). Version with stainless steel bearing has a stainless steel grease nipple. Clip-on safety cap (accessory). Spacers from nickel plated brass to reinforce fixing holes. Polyethylene washer for grease-nipple. External housing in stainless steel AISI 304-DIN TECHNICAL INFORMATION for CS Total protection with stainless steel polished surface. Solid cross-section base housing. No core cavities to trap contaminants. Resistance to corrosion: - Good resistance to highly corrosive chemicals such as acid, organic liquids, detergents. High load capacity. Continuous operating temperature: - From -20 to +80 C. This version maintains good dimensional stability at the maximum indicated temperature. Economical operation: - Long life bering insert. Self-alignment: - Max misalignment between shaft and housing: 2.5. Concept and design to meet all safety requirements. Interchangeable with standard cast iron flanged supports. Ball bearing pre-lubricated with long-life grease, which is ideal in applications in humid conditions, with water, alkaline or acid solutions. CS STANDARD POLYAMIDE HOUSING accessory COLOUR Safety cap in yellow. Internal housing in black. For sufficient quantities parts can be produced in different colours. SEE ALSO... Accessories: p. 110 Features, lubrication and maintenance: p. 112 Mounting instruction: p Calculation of load capacity, bearing life: p Chemical resistance: p
6 CS with grub screws with eccentric ring cover accessory Accessories Ø d mm version dimension (mm) A B C D E G H J Z T m n U V dynamic C (N) bearing load ratings static Co (N) housing load rating max. N* weight (Kg) closed safety cap open safety cap CHROME STEEL BEARING WITH GRUB SCREWS (POLYAMIDE) CS M6x APE CS M8x APE CS M8x APE CHROME STEEL BEARING WITH ECCENTRIC RING (POLYAMIDE) CSB M6x APE CSB M8x APE CSB M8x APE * MAX. RADIAL LOAD CAPACITY OF HOUSING: Values indicated in the table above, are obtained at 23 C. Strength of housing indicated on page
7 US CS-R COMPONENTS Housing in reinforced polyamide (Housing in reinforced polypropylene available on request). Adjustable chrome steel or stainless steel ball bearing, pre-lubricated. Can be re-lubricated by means of grease-nipple or a quick coupler. Ball-type grease-nipple or quick coupler from nickel plated brass (available upon request) to take semi-rigid hoses ø 4 mm in Rilsan (see accessories on page 110). Version with stainless steel bearing has a stainless steel grease nipple. Clip-on safety cap. Spacers from nickel plated brass to reinforce fixing holes. Polyethylene washer for grease-nipple. Rotary shaft seal ring with extra dust-protection lip in NBR rubber. Heavy duty O-Ring in NBR rubber. External housing in stainless steel AISI 304-DIN TECHNICAL INFORMATION for CS-R Total protection with stainless steel polished surface. Solid cross-section base housing. No core cavities to trap contaminants. Resistance to corrosion: - Good resistance to highly corrosive chemicals such as acid, organic liquids, detergents. High load capacity. Continuous operating temperature: - From -20 to +80 C. This version maintains good dimensional stability at the maximum indicated temperature. Economical operation: - Long life bearing insert. Self-alignment: - Max misalignment between shaft and housing: 2.5. Concept and design to meet all safety requirements. Interchangeable with standard cast iron flanged supports. Completely sealed units. Ball bearing pre-lubricated with long-life grease, which is ideal in applications in humid conditions, with water, alkaline or acid solutions. CS-R POLYAMIDE HOUSING SEE ALSO... Accessories: p. 110 Features, lubrication and maintenance: p. 112 Mounting instruction: p Calculation of load capacity, bearing life: p Chemical resistance: p
8 CS-R with grub screws open version with grub screws with eccentric ring open version with eccentric ring Ø d mm version dimension (mm) closed open A B C D E G H J Z T m n U V dynamic C (N) bearing load ratings static Co (N) housing load rating max. N* weight (Kg) CHROME STEEL BEARING WITH GRUB SCREWS (POLYAMIDE) CSR 55206CSR M6x CSR 55207CSR M8x CSR 55208CSR M8x CHROME STEEL BEARING WITH ECCENTRIC RING (POLYAMIDE) CSBR 55206CSBR M6x CSBR 55207CSBR M8x CSBR 55208CSBR M8x STAINLESS STEEL BEARING WITH GRUB SCREWS (POLYAMIDE) CSRS 55206CSRS M6x CSRS 55207CSRS M8x CSRS 55208CSRS M8x * MAX. RADIAL LOAD CAPACITY OF HOUSING: Values indicated in the table above, are obtained at 23 C. Strength of housing indicated on page
9 US CS-RL MAINTENANCE FREE COMPONENTS Housing in reinforced polyamide (Housing in reinforced polypropylene available on request). Adjustable chrome steel or stainless steel ball bearing, pre-lubricated. Can be re-lubricated by means of grease-nipple or a quick coupler. Clip-on safety cap. Spacers from nickel plated brass to reinforce fixing holes. Rotary shaft seal ring with extra dust-protection lip in NBR rubber. Heavy duty O-Ring in NBR rubber. External housing in stainless steel AISI 304-DIN Plastic plug. TECHNICAL INFORMATION for CS-RL Total protection with stainless steel polished surface. Solid cross-section base housing. No core cavities to trap contaminants. Resistance to corrosion: - Good resistance to highly corrosive chemicals such as acid, organic liquids, detergents. High load capacity. Continuous operating temperature: - From -20 to +80 C. This version maintains good dimensional stability at the maximum indicated temperature. Economical operation: - Long life bearing insert. Self-alignment: - Max misalignment between shaft and housing: 2.5. Concept and design to meet all safety requirements. Interchangeable with standard cast iron flanged supports. Completely sealed units. Ball bearing pre-lubricated with long-life grease, which is ideal in applications in humid conditions, with water, alkaline or acid solutions. CS-RL MAINTENANCE FREE - POLYAMIDE HOUSING MAINTENANCE FREE SEE ALSO... Accessories: p. 110 Features, lubrication and maintenance: p. 112 Mounting instruction: p Calculation of load capacity, bearing life: p Chemical resistance: p
10 CS-RL with grub screws open version with grub screws with eccentric ring open version with eccentric ring Ø d mm version dimension (mm) closed closed A B C D E G H J Z T m n U V dynamic C (N) bearing load ratings static Co (N) housing load rating max. N* weight (Kg) CHROME STEEL BEARING WITH GRUB SCREWS (POLYAMIDE) CSRL 55206CSRL M6x CSRL 55207CSRL M8x CSRL 55208CSRL M8x CHROME STEEL BEARING WITH ECCENTRIC RING (POLYAMIDE) CSBRL 55208CSBRL M8x * MAX. RADIAL LOAD CAPACITY OF HOUSING: Values indicated in the table above, are obtained at 23 C. Strength of housing indicated on page
June 2009 English Version Issue 14.0
B E A R I N G S U P P O R T S June 2009 English Version Issue 14.0 This catalogue presents the Bearing Line an inclues the latest generation of proucts shown in earlier catalogues. This catalogue relates
Standard BALL BEARING with grub screws
all bearing Stanar LL ERING with grub screws MTERIL Rings an balls in chrome steel. sphere Grub screws an protection rings are in steel. Seals in metal with vulcanise NR rubber. Ø coe imensions () K E
PULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
Visual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page
NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)
General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer
INVCP, INVCN. Vertical pumps for tanks. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-0300/03 [05-2012] INVCP, INVCN Vertical pumps for tanks 1. Fields of Application INVCP pumps are used for organic and inorganic liquids in water services and different industries.
Drawn cup needle roller bearings
Drawn cup needle roller bearings Sealed drawn cup needle roller bearings... 78 Full complement drawn cup needle roller bearings... 79 3 Dimensions... 79 Tolerances... 79 Misalignment... 80 Cages... 80
Slotted nut NMG. Housing nut GWR. Bosch Rexroth AG. for economical constructions. a min. 0,3. M A = tightening torque of slotted nut.
R310EN 3301 (2009.08) Precision Ball Screw Assemblies Bosch Rexroth AG 113 Slotted nut NMG for economical constructions B D d d1 b M A = tightening torque of slotted nut a min. 0,3 Polyamide insert Designation
4" GRJ Internal Eccentric Gear Pump
4" GRJ Internal Eccentric Gear Pump Performance: Flow rate 55 m 3 /h Pressure 1-14 bar Temperature 0-200 C Speed 400 d/d Viscosity 100-250000 SSU Technical Features: Internal eccentric gear pump 4 flanged
MZ, MA. Liquid ring pumps. 3 Design. 1 Fields of application. 4 Designation. 5 Materials. 2 Operating Data
Type series booklet CTI-1700/00 [12-2008] MZ, MA Liquid ring pumps 1 Fields of application Multi-stage, horizontal liquid ring pumps, with self-priming capacity. MZ and MA pumps are used for pumping of
Section 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
Operating / Assembly Instructions Type A and CS Coupling
Page: 1 of 14 Subject Index 1. Technical Data 2. Hints 2.1. General Hints 2.2. Warning and Safety Hints. 2.3. General Hints to Danger. 2.4. Proper use. 3. Storage. 4. Assembly. 4.1. Coupling components.
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
Setting New Standards. Widest Sealing Range Maximum Strain Relief Superior Protection Rating. 94 CONTA-CLIP, Inc. (732)
Setting New Standards Widest Sealing Range Maximum Strain Relief Superior Protection Rating 94 CONTA-CLIP, Inc. (732) 564-0705 The principle benefits gland body Materials: Nickel plated brass Stainless
2" GRRJ Internal Eccentric Gear Pump
2" GRRJ Internal Eccentric Gear Pump Performance: Flow rate 11.6 m 3 /h Pressure 1-14 bar Temperature 0-200 C Speed 500 d/d Viscosity 100-250000 SSU Technical Features: Internal eccentric gear pump 2 threaded
CASTORS & WHEELS WDS SECTION 20 - CASTORS & WHEELS. Levelling Castors. Furniture Castors. Stainless Steel & Zinc Plated Brackets.
CASTORS & WHEELS Furniture Castors Nylon Castors Rubber Castors High Temperature Phenlic Resin Castors Stainless Steel & Zinc Plated Brackets Heavy Duty Castors Light Duty Castors Levelling Castors Individual
DMRTM. SHAFT SEALS
TM www.daemar.com SHAFT SEALS For over 30 years Daemar Inc. has remained focused on partnering with our customers to deliver fluid sealing solutions that meet their business challenges. Whether the application
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
Heavy duty wheels and castors with cast polyurethane tread Blickle Besthane Soft
Heavy duty wheels and castors with cast polyurethane tread 236 we innovate mobility www.blickle.com Table of Contents ALBS LK LKR LU LH LS Series Page ALBS 80-300 mm 180-1150 kg 238 239 LK-ALBS 80-200
LENORD. +BAUER... automates motion. Accessories for rotary encoders GEL 20x, 21x, 23x, 26x. Technical information Version General.
ccessories rotary encoders GEL 20x, 21x, 23x, 26x LENORD +BUER... automates motion. Technical inmation Version 07.13 General Mounting accessories magnetic-incremental and magnetic absolute rotary encoders
HR930 Rotary Rake. Illustrated Parts Breakdown. Tongue & Main Frame. Gearbox & Tine Arm
HR0 Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Tongue & Main Frame Guards Gearbox & Tine Arm Axle Assembly Rotary Gearbox PTO Shaft 0//0 Tongue & Main Frame 0 0 0 0 Ref# Description
- SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART MULTIGO PERFORMANCE CHART MULTIGO
CONTENTS Page - CONTENTS CONTENTS 100 - SPECIFICATIONS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 40 202 PERFORMANCE CHART 80 203 - CONSTRUCTIONS CONSTRUCTIONS 300 CONSTRUCTIONS 301 CONSTRUCTIONS
Series Cylinders according to standard ISO 15552
Series 131-11 General This series of pneumatic cylinders is manufactured according to ISO 31 standards adapted to MA 2 and CNOMO/AFNOR 3 that guarantee the interchangeability of the cylinders even without
SS902 Safety Station with Eyewash, Stainless Steel Bowl SS902P Safety Station with Eyewash, Plastic Bowl
Safety Stations SS902 Safety Station with Eyewash, Stainless Steel Bowl SS902P Safety Station with Eyewash, Plastic Bowl application: Combination eyewash and shower safety station. Two GS-Plus spray-type
Process Connections for Dial Thermometers
sales@jumo.co.uk Data Sheet 608730 Page 1/7 Process Connections for Dial Thermometers Special features Temperature probes (TF) Process s (TA) Thermowell (SH) Temperature probes (TF) (S 1 min. 25 mm for
RWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
Materials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
Hydraulics BALL AND GATE VALVES
Hydraulics BALL AND GATE VALVES PRODUCT INDEX A comprehensive range of ball valves is available to suit most fluid control applications. Port sizes range from ¹ ₄ in to 4 in. Female thread forms are provided
4 Self aligning ball bearings
Rolling bearings 4 Self aligning ball bearings Designs and variants... 538 Basic design bearings... 539 Bearings with an extended inner ring.. 540 Cages... 540 Sealing solutions... 540 Greases for sealed
CATALOGUE+PRICELIST ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 ACG AUTOMATION CENTER GERMANY GMBH & CO. KG
CATALOGUE+PRICELIST 2.011 ALUMINIUM ROTARY ACTUATORS SERIES AC-A 0-90 DESIGN AND STRUCTURE Design and structure Our newly-designed AC-A Series Pneumatic Actuator is aluminum rack & pinion actuators in
Level indicators, screw plugs
Level indicators, screw plugs 885 Product overview Level indicators, screw plugs Oil level gauges K0443 Plastic plugs K0452 Oil level gauges K0444 Page 888 Aluminium plugs K0453 Page 894 Oil level sight
THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
BROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications.
ROLLER BEARINGS Roller Bearing Family of Products BROWNING offers a broad and complete line of mounted roller bearing products to satisfy a large variety of rugged, industrial applications. Browning roller
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
RS & RT WORM GEAR BOXES
RS & RT WORM GEAR BOXES C-MRS-MRT ed0-2009 rev00 GB Product Description Multipurpose housing Aluminium die cast & Grey Iron Modular for all mountings Wormshaft ZI profile, hardened and ground. Alloy steel.
CP3650 Series CP AB & CP AB Angle Sanders
32 CP3650-20AB CP3650-075AB rpm CP3650-20AB 2000 CP3650-075AB 7500 Index No. Parts No. Description Qty Index No. Parts No. Description Qty 653967390 Adaptater 6 654300330 Inlet 7 656452290 Disc Spring
Marathon series corrosion resistant products
Marathon series corrosion resistant products Contents 2 Introduction 6 End covers 8 Composite units 22 Stainless steel take-up frames 24 Cast stainless steel units 28 ZMaRC-coated insert bearings Stainless
5 TANK ¾ VALVE AND 6 TANK 1 VALVE HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS
HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS Standard ColourRHEADER TANK SOLUTIONS DESCRIPTION The patented Mecair Full Immersion System consists of a round header tank with fully integrated diaphragm
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
Replacement Parts List FI 4009 & FI 4009C. SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016
A Taco Family Company Replacement Parts List FI 4009 & FI 4009C 304-403 SUPERSEDES: April 28, 2016 EFFECTIVE: October 18, 2016 WHEN SELECTING AND ORDERING PARTS, ALWAYS REFER TO SERIAL ON NAMEPLATE 00
Heavy duty wheels and castors with cast polyurethane tread Blickle Besthane
Heavy duty wheels and castors with cast polyurethane tread 266 we innovate mobility www.blickle.com Table of Contents VSB/GB LU LH LS LSD Series Load capacity Page VSB/GB 80-1000 mm 400-30000 kg 268/269
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
1½" GR Internal Eccentric Gear Pump
1½" GR Internal Eccentric Gear Pump Performance: Flow rate 5.7 m 3 /h Pressure 1-14 bar Temperature 0-200 C Speed 1400 d/d Viscosity 100-250000 SSU Technical Features: Internal eccentric gear pump 1½ threaded
Indexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg
B C D BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B AD AS AD C D F Kg AS C
Single direction thrust ball bearings Double direction thrust ball bearings
Thrust ball bearings Single direction thrust ball bearings... 838 Double direction thrust ball bearings... 839 Bearing data general... 840 Dimensions... 840 Tolerances... 840 Misalignment... 840 Cages...
Product overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
04 The company 06 Services and process 08 Examples of suspension systems Kits
EN Component and system 04 The company 06 Services and process 08 Examples of suspension systems Kits Finishes 1 Cables 16 s 36 Ceiling attachments 44 Screw caps 48 Connectors lighting.com The company
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
INDUSTRIAL FITTINGS - quick release couplings
NiTO 1/2-3/4-1 system - couplings for water Material: Chromium plated brass Working temp.: Up to +80 C Sealing: NBR - cannot be used with fuel and oil (option - Viton). For valve O-ring made of EPDM. High
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 PERFORMANCE RANGE and SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
Direct drive electronic position indicators
Direct drive electronic position indicators DD51-E ELESA original design Direct drive electronic position indicators with battery power supply Base and case High-resistance polyamide based (PA) technopolymer.
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
MR 25 to 200 : Worm wheel and screw kinematics. MR 400 to 1600 : Yoke kinematics. Output torques up to Nm. External coating.
Type series booklet 8505.12/12--10 MR manual actuators MR 25 to 200 : Worm wheel and screw kinematics MR 400 to 1600 : Yoke kinematics MR 400 to 1600 MR 25 to 200 Output torques up to 16 000 Nm Applications
10 TANK WITH 2 VALVE HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS
HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS Standard ColourR FULL IMMERSION SYSTEM DESCRIPTION The patented Mecair Full Immersion System consists of a round header tank with fully integrated diaphragm
NSR-TBC. LM Guide Self-aligning Type Model NSR-TBC. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Self-aligning Type Model LM casing Spline nut End seal LM rail Grease nipple Side plate Clearance adjustment bolt 90 Side seal (Optional) Ball Retainer Cross section 30 Point of Selection A Point
Inserts for square and rectangular tubes
Inserts for square and rectangular tubes 35 Outer tube dimensions Ribbed inserts/plugs with smooth sliding surface for square and rectangular tubes. The tube inserts are suitable for tubes with a wall
series Linear guideways CG-serie 3.3 CG series
series CG-serie 3.3 CG series 3.3.1 Properties of the linear guideways, series CG The HIWIN linear guideways of the CG series with O-arrangement of the ball tracks guarantee high torque loading capacity,
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 QUANTITY FOR MODEL 303 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE 40/86 203 PERFORMANCE CURVE 40/106 204 PERFORMANCE CURVE 40/126 205 PERFORMANCE CURVE 40/156
RS & RT WORM GEAR BOXES
RS & RT WORM GEAR BOXES Product description Multipurpose mounting Aluminium die cast and Cast iron (from size 0 up) Wormshafts ZI profile, Hardened and ground. Alloy steel. RS Input IEC and NEMA motor
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
Rodless cylinders. Series General. Construction characteristics. Technical characteristics. Use and maintenance
Series 1600 Rodless cylinders General The purpose of producing a rodless cylinder is to provide a space saving option over conventional cylinders. On a traditional rod type cylinder, the total space occupied
Pipe fittings and tubing T, MPL, PNZ
Catalogue 2001 Pipe fittings and tubing T, MPL, PNZ Tube od ø4/2, 5/3, 6/4, 8/6, 10/8, 12/10, 14/12, 15/12,5 Connections M5, G1/8, G1/4, G3/8, G1/2 R1/8, R1/4, R3/8, R1/2, R3/4 7 When involved in factory
V-Rings around the clock... around the clock...
Description V-rings are rotary seals that can perform numerous jobs in their function of sealing rotating shafts: sealing against the penetration of dirt, dust, water or watery pollutants, combination
Energy Measurement Solutions Aluminium Piping Solutions Pneumatic and Pure Water Push In Fittings High Pressure Push In Piping Solutions Pneumatic Components Fittings for Fluids & Gases www.pneumsysenergy.com
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW) 205 PERFORMANCE CURVE
From a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW)
Hydraulic Quick Fit Couplings
Section 2 Section 2 Hydraulic Quick Fit Couplings 1 Trailer & Tipper Brake Couplings 6 Flat Face Ball & Poppet Couplings 1 Wash Couplings - 350 Bar 7 Flat Face Couplings 1 Rotary Couplings incl St/ 8 Screw
Handwheels, handles, position indicators
Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium
Cylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Straight, Male 45, Male 90, Male Straight, Female Straight, Cable Hose, Male Straight Swivel Fittings Ferrules for Fittings Further Accessories Applications
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016)
General Description The model FKB VGU-29 brings an economic solution to block abrasive and corrosive fluid sewage for granulometry until 5mm. They are light equipments, to be installed through flanges,
2-3 Miniature MGN/MGW Series Features of MGN Series
54 G99TE08-0405 2-3 Miniature MGN/MGW Series 2-3-1 Features of MGN Series 2-3-2 Construction of MGN Series Cap Block End cap End seal Grease nipple Ball Bottom seal Retainer Rolling Circulation System:
AC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
VOLUME CONTROL / REGULATING DAMPERS
VOLUME CONTROL / REGULATING S PRODUCT RANGE Model Range Includes A - Multi-Leaf. (Flanged - Rectangular Duct) B - Multi-Leaf. (Slip joint / Spigot - Rectangular Duct) C - Multi-Leaf. (Slip joint / Spigot
Stirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
Accessories product range
Accessories 199 Accessories product range Type SB/SBF (spiral tape) Spiral tapes are used to bundle cable harnesses efficiently and simply. The spiral tapes also protect the insulation of the wires. Page
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
Accessories. Chapter 16
Accessories Chapter 01 01 Accessories Rods for espagnolette locks Rod ø6 article-no. execution L pack. stock.0 steel nickel plated 00 1 pcs a.0 with plastic covered, brown 00 1 pcs a.5 with plastic covered,
Locks and Catches Information
Information SYMO 3000 is the worldwide unique furniture locking system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum expenditure and effort. The
Product Catalogue 2012
Grease Gun Connectors and Lubrication Accessories MATO Grease Gun Connectors Conical Connector for D-Grease fittings M10 x 1 Conical Connector for D-Grease fittings R1/8" 32 400 42 32 400 28 Pointed Connector
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
CERTIFIED MANAGEMENT SYSTEM
EN RS RT CERTIFIED Technology Made in Italy Since 955 Varvel has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment offers also customized
BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
Compressed Air Conditioning. accessories. One Stop Shop process reliable efficient economical high degree of reusability
Screwdriving technology Automation Air motors Air tools Compressed Air Conditioning and Accessories One Stop Shop process reliable efficient economical high degree of reusability DEPRAG offers a comprehensive
3 & 4 WAY DIVERTER VALVES DESIGN FEATURES
3 & 4 WAY DIVERTER VALVES The 3V and 4V models are diverter valves designed to handle solid loaded fluids. Mainly used for pulp stock in the Pulp and Paper industry. Sizes: 80 to 300 (larger diameters
Dimensions and types. Type BA. Type BAS
and types BA Way wipers of this type are used mainly in those cases where installation conditions are restrictive, or where the wipers are additionally protected by means of a telescopic cover, a bellows,