2" GRRJ Internal Eccentric Gear Pump
|
|
|
- Cornelius Lambert
- 5 years ago
- Views:
Transcription
1 2" GRRJ Internal Eccentric Gear Pump Performance: Flow rate 11.6 m 3 /h Pressure 1-14 bar Temperature C Speed 500 d/d Viscosity SSU Technical Features: Internal eccentric gear pump 2 threaded ports Compact design Reliable construction thanks to only two moving parts Various material options Available with external bypass, jacketed and blind cover 230v, three phase 50/60hz motors available Gearbox and belt pulley drive available Manufactured according to CE regulations Applications: Fuel oil, diesel fuel and gas oil transfer Small scale thermal oil applications including Marlotherm, Duratherm, Paratherm, Multitherm, Mobiltherm and Dowtherm Lubrication applications Coolant transfer Any transfer of low to medium viscosity fluids with lubricating properties Not suitable for fluids containing abrasive particles Material Options: Pump body, covers: Pig cast iron, Spheroidal cast iron, cast steel, AISI 304/316 CrNi Stainless Steel Gears: Spheroidal cast iron, cast steel, AISI 304/316 CrNi Stainless Steel Bearings: Snbz 12 bronze, carbon graphite, slicon carbide, hard metal coated steel, bearing Sealing: Soft seal or packing gland, Rotatherm seal, lip seal, mechanical seal, cartridge type mechanical seal Capacity & Power Table Capacity (Q) Speed (rpm) Pressure 3 Bar 6 Bar 9 Bar 12 Bar Viscosity HP 0.75 HP 1 HP 1.5 HP SSU HP 1 HP 1.5 HP 2 HP SSU HP 1.5 HP 2 HP 2 HP SSU HP 3 HP 4 HP 5.5 HP 7500 SSU HP 4 HP 5.5 HP 5.5 HP 2500 SSU HP 4 HP 5.5 HP 7.5 HP 750 SSU
2 Pump Dimensions - Capacity Graphs:
3
4 Pump Dimensions: GRR 2" GRRJ 2" GRRGJ 2" Coupling Dimensions - Gearbox drive: GRRJ 2" GRRGJ 2" GRR 2" Motor Power & Speed I HD H Kg 1 hp / 0.75 kw /55 d/d (rpm) IRAM63/80M 1.5 hp / 1.1 kw /104 d/d (rpm) IRAM63/90S 2 hp / 1.5 kw 33/98 d/d (rpm) IRAM63/90L 3-4 hp / kw 47/98 d/d (rpm) IRAM63/100L 5.5 hp / 4 kw 101/126 d/d (rpm) IRAM63/112M
5 GRR 2" GRRGJ 2" GRRJ 2" Motor Power & Speed I HD H B C Kg 1.5 hp / 1.1 kw /380 d/d (rpm) IRAM52/90S 2 hp / 1.5 kw 90/480 d/d (rpm) IRAM52/90L 3 hp / 2.2 kw 50/234 d/d (rpm) IRAM62/C90L 4 hp / 3 kw 65/450 d/d (rpm) IRAM62/100L 5.5 hp / 4 kw 7.5 hp / 5.5 kw 87/480 d/d (rpm) 210/450 d/d (rpm) IRAM62/112M IRAM62/C112M 7.5 hp / 5.5 kw 75/210 d/d (rpm) IRAM72/132S Pump Dimensions - Belt Pulley Coupling: GRRJ 2" Motor Power & Speed Pump Speeds n1 d/d n2 d/d n3 d/d n4 d/d F(1) F(2) F(3) F(4) B C D E Kg 3 hp / 2.2 kw MOTOR 100L hp / 3 kw MOTOR 100L hp / 4 kw MOTOR 112M hp / 5.5 kw MOTOR 132S hp / 7.5 kw MOTOR 132M hp / 11 kw MOTOR 160M hp / 15 kw MOTOR 160L 240
6 Spare Parts List - Sealed with soft seal, and pressure relief valve on cover: 1 Coupling Key 8x7x50 AB 1 15 Bracket (w/ 1 29 Hex Bolt M8x Lock Nut 1 16 Bracket Gasket 1 30 Bypass O-Ring 1 3 Lock Washer 1 17 Casing (90 Threaded Ports) 1 31 Valve 1 4 Spacer 1 18 Casing (90 Flanged Ports) 1 32 Spring 1 5 Adjusting Nut 2 19 Spare Parts List - Sealed with soft seal, jacketed, and with blind cover: 1 33 Washer 1 6 Lip Seal ø35xø62x Casing (180 Flanged Ports) 1 34 Bypass Cover 1 7 Ball Bearing (2306) 1 21 Cover Gasket 1 35 Cap O-Ring 1 8 Packing Press 1 22 Rotor Gear 1 36 Nut M Soft Seal / Packing Gland 1 TK 23 Idler Gear 1 37 Adjusting Screw M12x Bracket Bushing 1 24 Idler Bushing 1 38 Cap 1 11 Shaft 1 25 Bypassed Cover Pin 1 39 Greasing Fitting R3/8" 1 12 Rotor Key 8x7x32 A 1 26 Cover (w/ Bypass Inlets) 1 40 Grub Screw M10x Inbus Bolt M10x Bypass Gasket 2 41 Nut M Bracket 1 28 Pressure Relief Valve 1 42 Square Screw M10x Coupling Key 8x7x50 AB 1 12 Rotor Key 8x7x32 A 1 23 Idler Gear 1 2 Lock Nut 1 13 Inbus Bolt M10x30 Dimensions - Gearbox drive: Inbus Bolt M10x35 (For Cover w/ Idler Bushing 1 3 Lock Washer 1 14 Bracket 6 25 Cover Pin 1 4 Spacer 1 15 Bracket (w/ 1 26 Blind Cover 1 5 Adjusting Nut 2 16 Bracket Gasket 1 27 Cover (w/ 1 6 Lip Seal ø35xø62x Casing (90 Threaded Ports) 1 28 Greasing Fitting R3/8" 1 7 Ball Bearing (2306) 1 18 Casing (90 Flanged Ports) 1 29 Grub Screw M10x Packing Press Nut M Soft Seal / Packing Gland 1 TK 20 Casing (180 Flanged Ports) 1 31 Square Screw M10x Bracket Bushing 1 21 Cover Gasket 2 11 Shaft 1 22 Rotor Gear 1
7 Spare Parts List - Sealed with mechanical seal, and pressure relief valve on cover: 1 Coupling Key 8x7x50 AB 1 15 Bracket (w/ 1 29 Hex Bolt M8x Lock Nut 1 16 Bracket Gasket 1 30 Bypass O-Ring 1 3 Lock Washer 1 17 Casing (90 Threaded Ports) 1 31 Valve 1 4 Spacer 1 18 Casing (90 Flanged Ports) 1 32 Spring 1 5 Adjusting Nut 2 19 Spare Parts List - Sealed with soft seal, jacketed, and with blind cover: 1 33 Washer 1 6 Lip Seal ø35xø62x Casing (180 Flanged Ports) 1 34 Bypass Cover 1 7 Ball Bearing (2306) 1 21 Cover Gasket 1 35 Cap O-Ring 1 8 Internal Circlip (ø62) 2 22 Rotor Gear 1 36 Nut M Ball Bearing (6007) 2 23 Idler Gear 1 37 Adjusting Screw M12x Mechanical Seal Ø Idler Bushing 1 38 Cap 1 11 Shaft 1 25 Bypassed Cover Pin 1 39 Greasing Fitting R3/8" 2 12 Rotor Key 8x7x32 A 1 26 Cover (w/ Bypass Inlets) 1 40 Grub Screw M10x Inbus Bolt M10x Bypass Gasket 2 14 Bracket 1 28 Pressure Relief Valve 1 1 Coupling Key 8x7x50 AB 1 11 Shaft 1 21 Cover Gasket 2 2 Lock Nut 1 12 Rotor Key 8x7x32 A 1 22 Rotor Gear 1 3 Lock Washer 1 13 Inbus Bolt M10x30 Inbus Bolt M10x35 (For Cover w/ Idler Gear 1 4 Spacer 1 14 Bracket 1 24 Idler Bushing 1 5 Adjusting Nut 2 15 Bracket (w/ 1 25 Cover Pin 1 6 Lip Seal ø35xø62x Bracket Gasket 1 26 Blind Cover 1 7 Ball Bearing (2306) 1 17 Casing (90 Threaded Ports) 1 27 Cover (w/ 1 8 Internal Circlip (ø62) 2 18 Casing (90 Flanged Ports) 1 28 Greasing Fitting (R3/8") 2 9 Ball Bearing (6007) Mechanical Seal Ø Casing (180 Flanged Ports) Grub Screw M10x16 4
8 Spare Parts List - Sealed with lip seal, jacketed and with blind cover: 1 Coupling Key 8x7x50 AB 1 11 Shaft 1 21 Cover Gasket 1 2 Lock Nut 1 12 Rotor Key 8x7x32 A 1 22 Rotor Gear 1 3 Lock Washer 1 13 Inbus Bolt M10x30 Inbus Bolt M10x35 (For Cover w/ Idler Gear 1 4 Spacer 1 14 Bracket 1 24 Idler Bushing 1 5 Adjusting Nut 2 15 Bracket (w/ 1 25 Cover Pin 1 6 Lip Seal ø35xø62x Bracket Gasket 1 26 Blind Cover 1 7 Ball Bearing (2306) 1 17 Casing (90 Threaded Ports) 1 27 Cover (w/ 1 8 Internal Circlip (ø56) 1 18 Casing (90 Flanged Ports) 1 28 Greasing Fitting R3/8" 1 9 Lip Seal ø35xø56x Bracket Bushing 1 20 Casing (180 Flanged Ports) Grub Screw M10x16 4 Spare Parts List - Sealed with cartex mechanical seal, and pressure relief valve on cover: 1 Coupling Key 8x7x50 AB 1 15 Inbus Bolt M10x Pressure Relief Valve 1 2 Lock Nut 1 16 Bracket (Jacketed & w/ Cartex) 1 30 Hex Bolt M8x Lock Washer 1 17 Bracket Gasket 1 31 Bypass O-Ring 1 4 Spacer 1 18 Casing (90 Threaded Ports) 1 32 Valve 1 5 Adjusting Nut 1 19 Casing (90 Flanged Ports) 1 33 Spring 1 6 Lip Seal ø35xø62x Washer 1 7 Ball Bearing (2306) 1 21 Casing (180 Flanged Ports) 1 35 Bypass Cover 1 8 Pulley 1 22 Cover Gasket 1 36 Cap O-Ring 1 9 Hex Bolt M10x Rotor Gear 1 37 Nut M M10 Washer 2 24 Idler Gear 1 38 Adjusting Screw M12x Cartex Seal Ø Idler Bushing 1 39 Cap 1 12 Bracket Bushing 1 26 Bypassed Cover Pin 1 40 Greasing Fitting R3/8" 2 13 Shaft 1 27 Cover (w/ Bypass Inlets) 1 41 Grub Screw M10x Rotor Key 8x7x32 A 1 28 Bypass Gasket 2
9 Spare Parts List - Sealed with cartex mechanical seal, jacketed and with blind cover: 1 Coupling Key 8x7x50 AB 1 11 Cartex Seal Ø Cover Gasket 1 2 Lock Nut 1 12 Bracket Bushing 1 22 Rotor Gear 1 3 Lock Washer 1 13 Shaft Idler Gear 1 4 Spacer 1 14 Rotor Key 8x7x32 A 1 24 Idler Bushing 1 5 Adjusting Nut 2 15 Inbus Bolt M10x30 Inbus Bolt M10x35 (For Cover w/ 1 25 Cover Pin 1 6 Lip Seal ø35xø62x Bracket (Jacketed & w/ Cartex) 1 26 Blind Cover 1 7 Ball Bearing (2306) 1 17 Bracket Gasket 1 27 Cover (w/ 1 8 Pulley 1 18 Casing (90 Threaded Ports) 1 28 Greasing Fitting R3/8" 1 9 Hex Bolt M10x Casing ( Grub Screw M10x M10 Washer 1 20 Casing (180 Flanged Ports) 1
4" GRJ Internal Eccentric Gear Pump
4" GRJ Internal Eccentric Gear Pump Performance: Flow rate 55 m 3 /h Pressure 1-14 bar Temperature 0-200 C Speed 400 d/d Viscosity 100-250000 SSU Technical Features: Internal eccentric gear pump 4 flanged
1½" GR Internal Eccentric Gear Pump
1½" GR Internal Eccentric Gear Pump Performance: Flow rate 5.7 m 3 /h Pressure 1-14 bar Temperature 0-200 C Speed 1400 d/d Viscosity 100-250000 SSU Technical Features: Internal eccentric gear pump 1½ threaded
Ductile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
UNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4
UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View
UNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
UNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:
Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4
Product Range IDEX CORPORATION
Product Range IDEX CORPORATION Viking Pump provides an unmatched combination of application expertise and positive displacement pumping products to meet your pumping needs. We specialize in the design,
Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Nominal Flow. Pressure Range. Temp. Range. Viscosity Range. Stainless Steel.
Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Standard Pump (shown: KK124A) Operating Range 1 : Cast Iron Series: 124A/AE, 4124A/AE, 324A, 4324A, 224A/AE, 4224A/AE
UNIVERSAL PRODUCT LINE: STAINLESS STEEL JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
UNIVERSAL PRODUCT LINE: SERIES 227A, 4227A, 327A, 4327A Section 1702 Page 1702.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
TOUGH SIMPLE GEAR PUMPS COST EFFECTIVE TOUGH SIMPLE COST EFFECTIVE. Tel: / Int'l: Fax: / Int'l:
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction
- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DWC PERFORMANCE CURVE DWC
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 300 203 PERFORMANCE CURVE 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction
Series PRODUCTS. self-priming Horizontal screw pump for non lubricating liquids. Water. Seawater. Heavy fuel oils. Bilge/Ballast pumps
self-priming Horizontal screw pump for non lubricating liquids PRODUCTS Water Seawater Oils Heavy fuel oils Light products Labelling Bilge/Ballast pumps General service pumps Cargo pumps Transfer pumps
VIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
CVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
GEAR PUMPS TOUGH INTERNAL GEAR SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE
TOUGH INTERNAL GEAR GEAR PUMPS SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products,
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW) 205 PERFORMANCE CURVE
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL AND BEARINGS 302 MECHANICAL SEAL 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE A (UP TO 0.6 KW) 204 PERFORMANCE CURVE A (FROM 0.75 KW UP TO 1.1 KW)
Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer
Screw pump Series LPD Product description Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer The LPD pump is used for a number of different fluids:
MZ, MA. Liquid ring pumps. 3 Design. 1 Fields of application. 4 Designation. 5 Materials. 2 Operating Data
Type series booklet CTI-1700/00 [12-2008] MZ, MA Liquid ring pumps 1 Fields of application Multi-stage, horizontal liquid ring pumps, with self-priming capacity. MZ and MA pumps are used for pumping of
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 THERMAL INSULATION 301 MECHANICAL SEAL 302 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY amd CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS
VIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Standard Pump (shown: KK123A) Jacketed Pump (shown: KK4223A) Nominal Flow Rates: Pump
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
8L SERIES THREE SCREW PUMPS
TM 8L SERIES THREE SCREW PUMPS The reliable pump people ROTARY SCREW PUMPS Performance Shown at 1500 PSID (103 BAR), 200 SSU (43 CST) 60 HZ: 870 1150 1750 50 HZ: 960 1450 1200 1100 630M 40 250 1000 900
Engineering Data Pack GlobalGear Series Pump US
Engineering Data Pack GlobalGear Series Pump US Excellence at work. Excellence in life. Table of Contents GG015 - GG030 with Angle Ports (Flanged Only) Mounting Dimensions 3 IG015I - IG030I with Integral
Spare parts manual SAB 83
Spare parts manual SAB 83 Screw compressor unit ENG Spare parts Manual SAB 83 18. Parts list for SAB 83 18. Parts list for SAB 83 0662_811_ENG.fm Relevant drawing document: 0662-810 Pos. no. Designation
PARTS LIST AF O - AF I
MOUVEX MODEL : PARTS LIST AF O - AF I P.L. : Section 003-C0 003 Effective November 20 (See Instructions 003-C00 for Installation, Operation and Maintenance) Replaces September 20 Reference 98 Full set
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303 THERMAL INSULATION 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 300 203 PERFORMANCE CURVES 500 204 - CONSTRUCTIONS 300 SECTIONAL
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE
- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403
CONTENTS Page - SPECIFICATIONS 200-201 SELECTION CHART 202 SELECTION CHART TABLE 203 TYPE KEY AND CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 3 ( 2-3-4-5 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 6-7-8-9 IMPELLERS
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
BSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
PARTS LIST AF O - AF I
MOUVEX MODEL : PARTS LIST AF O - AF I P.L. : Section 1003-C01 1003 Effective November 2011 (See Instructions 1003-C00 for Installation, Operation and Maintenance) Replaces September 2011 Reference 98 Full
AK O - AK I Effective November 2011 (See Instructions 1003-E00 for Installation, Operation and Maintenance) Replaces September 2011.
MOUVEX MODEL : PARTS LIST AK O - AK I P.L. : Section 003-E0 003 Effective November 20 (See Instructions 003-E00 for Installation, Operation and Maintenance) Replaces September 20 Reference 98 Full set
3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
1003-H01 P.L. : MODEL : AL O. Effective November 2011 Replaces September Description
MOUVEX PARTS LIST P.L. : MODEL : 1003-H01 Section 1003 Effective November 2011 (See Instructions 1003-H00 for Installation, Operation and Maintenance) Replaces September 2011 Reference 98 Full set of screws
BEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids
CMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE CMA 204 PERFORMANCE CURVE CMB 205 PERFORMANCE CURVE CMC 206 PERFORMANCE
2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors
Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors Series R2, Frame 63 355 Introduction KHM R2 series cast iron motors are totally enclosed fan cooled, 3 phase, and squirrel cage induction
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE CURVE 320 8 PERFORMANCE
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
Bearing Frame Mount CAST IRON IMPELLER B4EYRMBM TYPE B SINGLE STAGE CENTRIFUGAL PUMP TABLE I
Page 0. Date November, 009 B4EYRMBM Packing Construction 3 8 B/M No. Rotation Case Diameter B50 CW M5 L09.88 80 A 3 See Supplement B 9 3 See Table I Shaft (Not sold separately) See Note 9 Cover, Suction
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 1506 203 PERFORMANCE CURVE 2006 203 PERFORMANCE CURVE 3006 203 PERFORMANCE CURVE 4006 203
AK O - AK I Effective November 2011 (See Instructions 1003-E00 for Installation, Operation and Maintenance) Replaces September 2011.
MOUVEX MODEL : PARTS LIST AK O - AK I P.L. : Section 1003-E01 1003 Effective November 2011 (See Instructions 1003-E00 for Installation, Operation and Maintenance) Replaces September 2011 Reference 98 Full
Type 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
OUTLINE DIMENSIONS Ø D C A L B W HYDRAULIC- AND COMPRESSED AIR PORTS. December 2012 HKL HYDRAULIC COMPRESSORS HKL 4100/8-113-O-PE
December 0 HKL 00/--O-PE OUTLINE DIMENSIONS H B W A L Ø D C MODEL DIMENSIONS, mm WEIGHT OIL FILL L W H A B C D kg l HKL 00/ - 0 0 0 0 0 HYDRAULIC- AND COMPRESSED AIR PORTS AP P T MODEL HYDRAULIC PORTS
Page - DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX 5/10/ PUMP TABLE MATRIX 5/10/ PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 2-3 IMPELLERS ) 204 PERFORMANCE CURVE 3 ( 4-5-6 IMPELLERS )
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
FKL (25, 75, 150, 205, 250 & 400) Exploded View
3 FKL (5, 75, 50, 05, 50 & 400) Exploded View 3 4 5 6 7 8 9a0 a 3 4 5 6 7 34 35 8 9 0 40 4 4 43 36 37 38 39 44 45 46 65000005 Rev A 4 5 6 Fristam FKL Series Pumps 33 3 7 8 48 47 3 49 9 30 3 b 3 49 33 50
Spare parts list Pentruder Modular Drilling System
Spare parts list Pentruder Modular Drilling System Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 THERMAL INSULATION DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
OPERATION MANUAL INTERNAL GEAR PUMP. Models: NG-H, NG-HL, NG-K, NG-KK, NG-L, NG-LQ, NG-LL, NG-LS, NG-Q, NG-QS. Tel: Fax:
OPERATION MANUAL INTERNAL GEAR PUMP Models: NG-H, NG-HL, NG-K, NG-KK, NG-L, NG-LQ, NG-LL, NG-LS, NG-Q, NG-QS. 1 Contents Pump Designation System Maintenance Thrust bearing adjustment Pressure Relief Valve
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 076 203 PERFORMANCE CURVES 106 204 - CONSTRUCTIONS 300 SECTIONAL
DI PUMP PARTS PRICE LIST
ITEM 1 2 2A PUMP 5040 Pump Body, 1-1/2" NPT Mech. Seal 1 40058 1 5040 Pump Body, 1-1/2" NPT, Packing 1 40057 1 5040 Pump Body, 1-1/2" 150# Flg., Mech. Seal 1 40787 1 5040 Pump Body, 1-1/2" 150# Flg., Packing
Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
Parts for Fig. 4565, 4566 & 4568 Industrial Section 40L Bulletin 95. Repair Parts.
www.cranepumps.com Parts for Fig. 55, 5 & 5 Item No. 1 2 * 1 19 23 * 2 32 33 * 39 2 9 70 71 * 73 101 101A 105 11 19 19A 170 199 212 21 219 22 * 21 22 2 250 25 255 25 * 257 25 20 25 27 2 270 277 25 29 29
VIKING HEAVY DUTY PUMPS SERIES 225 AND 4225 JACKETED BRACKET, STANDARD CONSTRUCTION FEATURES
VIKING HEAVY DUTY PUMPS JACKETED BRACKET, STARD CONSTRUCTION FEATURES SERIES 5 Pumps Cutaway View 5-0-60-80-5 GPM Sizes (-7--8- m³/hr) Section Page. Issue C MECHANICAL SEAL (SERIES 5) H - LL SIZES LS -
ROTARY VANE VACUUM PUMPS Exploded View DuraVane Rotary Vane Pumps Oil-Lubricated RVL212HH
Exploded View Pumps 95 SOUTH WOODLAND AVENUE, MICHIGAN CITY, IN 660-567 Please visit our website at Page Number Reference www.dekkervacuum.com DWG //05 Exploded View 95 SOUTH WOODLAND AVENUE, MICHIGAN
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
S200-P Passport Series Fire Pump Service Parts List
Document Number Issue Date 04/08/13 Rev. Date 9/24/18 S200-P Passport Series Fire Pump Service Parts List Index: Component See Pages Body and Impeller 2, 3 Pedestal and Primers 4, 5 Cross Section Views
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.75 203 PERFORMANCE CURVE 1.00 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
SPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 20 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 300 203 PERFORMANCE CURVES 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
SUBMERSIBLE SEWAGE PUMPS WITH SEMI-VORTEX IMPELLER in cast iron
Submersible sewage pumps with semi-vortex impeller APPLICATIONS Ideal for waste waterapplications containing soft or fibrous solids Industrial waste water drainage Septic effluent Miscellaneous drainage
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE CURVE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 076 203 PERFORMANCE CURVE 106 203 PERFORMANCE CURVE 156 203 PERFORMANCE
RWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
Spare Parts Manual. Single Screw Extruder BASF. Spare Parts Manual BASF rev
Spare Parts Manual Single Screw Extruder BASF Spare Parts Manual BASF rev 09--08 Contents Screw Elements... Barrel assemblies...8 Clamps... Barrel end section... 5 Cutter...5 6 Shaft...9 7 Control Arm...
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
DML - DMLF. SUBMERSIBLE SEWAGE PUMPS (SINGLE-CHANNEL) in cast iron. Your Life, our Quality. Worldwide. 67 Wastewater APPLICATIONS TECHNICAL DETAILS
APPLICATIONS TECHNICAL DETAILS TECHNICAL DATA 40 mm (DMLF) DN50, DN55, DN65 (DMLF) MATERIALS ACCESSORIES (ON REQUEST) PUMP IDENTIFICATION CODE 80 DML DMLF 5 2,2 50 HZ 2,2 3,7 5,5 7,5 11 15 22 MODEL OUTPUT
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page SPECIFICATIONS 0 PERFORMANCE RANGE and SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 MEI INDEX SPECIFICATIONS 5 PERFORMANCE CURVE 32 6 PERFORMANCE CURVE 32 7 PERFORMANCE
V Rev US
V - 0805 Rev. 05 - US APPLICATIONS INDUSTRIES V series internal gear rotary pumps are suitable for pumping liquids of any viscosity. Solids cannot be handled, but the pumps can cope with abrasive particles.
VIKING GENERAL PURPOSE PUMPS SERIES 32 AND 432
Page 310.1 FEATURES SERIES 32 and 432 3 GPM (.7 m³/hr) Size Shown. or Mechanical seal type. Valve on casing. SERIES 432 5 GPM (1 m³/hr) Mechanical seal type. Shown with valve on head. C, F & FH Sizes J
Spare parts list Trowel STG244 F TP
Spare parts list Trowel STG244 F TP Valid from serial number Valid to serial number BGF111601- www.cp.com STG244 F TP Spare parts list General information This spare parts list applies to the following:
516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
with electric actuators Feedwater control valve with pump spill back DN
ARI-STEVI 453 with electric actuators Feedwater control valve with pump spill back DN 25-100 ARI-STEVI 453 Electric actuator ARI-PREMIO 2,2-15 kn ARI-PREMIO-Plus 2G 2,2-15 kn Enclosure IP 65 2 torque switches
CP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer
Flow volume: l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer
Std Line ACE3 Screwpump Series Product description Flow volume: 15-180 l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer The Std Line (standard) ACE pumps come
MONOBLOC CENTRIFUGAL ELECTRIC PUMP IN COMPLIANCE WITH EN 733 in cast iron
Cast iron monobloc centrifugal electric pumps in compliance with EN 733. APPLICATIONS Moving clean water for civil, agricultural, industrial use, pressure boosting units, heating and air conditioning plants
HD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4
HD series double eccentric HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 tables dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes
AC motors IE1/IE2/IE3
1303 AC motors IE1/IE2/IE3 www.brd-klee.com Danish Design 2 Content Page Table of content 3 MS and MS2 2-pole 4 MS and MS2 4-pole 5 MS and MS2 6-pole 6 MS and MS2 8-pole 6 Basic dimensions MS/MS2 7-9 Spare
VISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
UNIVERSL PRODUCT LINE: SERIES 724, 4724 Section 1706 Page 1706.1 Issue B TBLE OF CONTENTS Features & Benefits...2 Cutaway View & Pump Features...2 Model Number Key...3 Standard Materials of Construction...3
Screw Pumps Series EMTEC HIGH-TECH FOR EMULSION. 20 DQ axial branch with pipe thread. 140 D8.6 radial branch with SAE flange
Screw Pumps 20 DQ axial branch with pipe thread HIGH-TECH FOR EMULSION 140 D8.6 radial branch with SAE flange Application For handling good, medium or mal-lubricating, abrasive fluids in cooling lubricant
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.
SIHI multi Type MSC. Modular multistage pumps. Description. Construction. Applications. Optional special designs. Materials.
Modular multistage pumps SIHI multi Type MSC Description The SIHI multi MSC range of horizontal, ring-section multistage pumps have been designed for long-term reliability when pumping high pressure liquids.
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 QUANTITY FOR MODEL 303 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATION 202 PERFORMANCE CURVE 40/86 203 PERFORMANCE CURVE 40/106 204 PERFORMANCE CURVE 40/126 205 PERFORMANCE CURVE 40/156
CMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS
CENTRIFUGAL PUMPS CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 PERFORMANCE CHART CMA 0.50 203 PERFORMANCE CHART CMA 0.75 204 PERFORMANCE CHART CMA 0.80 205 PERFORMANCE CHART
GDP Mechanical Diaphragm Pumps
GDP Mechanical Contents Introduction 3 2 Applications 3 Features 3 Construction materials 3 Carry frame 4 Petrol/Diesel engines 4 Electric motors 4 GDP 25 5 GDP 32 6 GDP 38 7 GDP 50 8 GDP 76 9 Service
Axially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data
Type series booklet 1385.52/3--10 RDLV Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
Ebara Submersible Sewage Pumps (Single Channel Impeller)
Ebara Submersible Sewage Pumps (Single Channel Impeller) Features and Applications Model DML 50Hz + Features! Non-clog single channel impeller Non-clog single channel impeller has 3 spherical passage and
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0