SKF Inch Linear Bearing Series

Size: px

Start display at page:

Download "SKF Inch Linear Bearing Series"

Trevor Dean
5 years ago
Views:

1 SKF Inch Linear Bearing Series

Quick-ship Easy Serve Program from SKF Precision ground shaft Class L precision ground shaft from 1/4'' to 2'' Same day shipment 1-1 pieces (Order received by 12:N EST) 1-2 Day shipment 11-2 pieces

2 Quick-ship Easy Serve Program from SKF Precision ground shaft Class L precision ground shaft from 1/4'' to 2'' Same day shipment 1-1 pieces (Order received by 12:N EST) 1-2 Day shipment 11-2 pieces No set-up fee Two regional cut centers to choose from Metric shafting (1 5 diameter) in stock Ask your SKF representative about our OEM shaft stocking program SHAFT DIAMETER AISI 155 Steel Stainless Steel SKF P/N SKF P/N 4 1/4" LJX 4 x **** LJXR 4 x **** 6 3/8" LJX 6 x **** LJXR 6 x **** 8 1/2" LJX 8 x **** LJXR 8 x **** 1 5/8" LJX 1 x **** LJXR 1 x **** 12 3/4" LJX 12 x **** LJXR 12 x **** 16 1" LJX 16 x **** LJXR 16 x **** 2 1-1/4" LJX 2 x **** LJXR 2 x **** /2" LJX 24 x **** LJXR 24 x **** 32 2" LJX 32 x **** LJXR 32 x **** **** Please indicate length in es. For more information on the complete line of products, contact your SKF Representative, call us at or visit us at Toll free Fax Add one day for truck shipment (eight or length restrictions may apply) Valid for shaft cut to length, machined shaft upon request Stainless steel and chrome-plated shaft available Easy Serve delivery program available for profile rail guide series Complete ball screw and spindle rebuilding capabilities

SKF linear bearing series SKF, the world s leading supplier of ball and roller bearings, is also a major player in the worldwide linear motion market.

3 SKF linear bearing series SKF, the world s leading supplier of ball and roller bearings, is also a major player in the worldwide linear motion market. e offer a complete range of linear motion products that includes ball and roller screws, linear actuators, profile rails (square rail) and precision rail products. In addition, we offer a complete line of metric and linear ball bearings and shafting. The following information highlights SKF s new line of series linear ball bearings, housings, shafting and accessories. Our goal is to offer the market a full line of high-quality linear motion products so that SKF will be the primary source for solutions to all of your linear motion needs. If you have any questions or coents, please call our toll free number at 1 (8) Our engineers will be happy to assist you with any of your technical questions or provide iediate interchanges. In addition, our customer service department is ready to help you with any questions concerning price and delivery. Table of content page Product descriptions LBXR type Standard LBXR/AJ type Clearance adjustable LBXT type Open LBXD/LBXF type Self-aligning LUXD type Block LUXD/AJ type Clearance adjustable block LTXD type Tandem block LTXD/AJ type Clearance adjustable tandem block LUXF type Open block LTXF type Tandem open block LJX and accessories Inch shafting LSXB type Shaft support rail LSXBL type Low shaft support rail LSXS type Shaft end support Interchange

SKF linear bearings LBXR Closed bearing with steel sleeve. Available with steel or resin retainers. A stainless steel version with a resin retainer is also available. Sizes range from 1/8" to 4".

Available as standard with resin retainer or stainless steel with resin retainer. Sizes range from 1/4" to 2". Available with or without seals integral to the bearing.

Available with or without seals integral to the bearing.* LBXD/LBXF style Self-aligning bearing with resin retainer. Allows for 1º of misalignment of the bearing.

* LUXD style Self-aligning LBXD style bearing mounted in an anodized aluminum housing. Available in sizes 1/4" to 2".

* LUXD/AJ style Self-aligning LBXD style bearing mounted in an adjustable anodized aluminum housing. This unit allows for adjustment of clearance. Available in sizes 1/4" to 2".

* LUXF style Self-aligning LBXF style bearing mounted in an aluminum housing. Available in sizes 1/4" to 2". Comes standard with grease fitting hole and integral seals.

4 SKF linear bearings LBXR Closed bearing with steel sleeve. Available with steel or resin retainers. A stainless steel version with a resin retainer is also available. Sizes range from 1/8" to 4". Available with or without seals integral to the bearing.* LBXR/AJ style Bearing with steel sleeve and slot for adjustment of preload. Available as standard with resin retainer or stainless steel with resin retainer. Sizes range from 1/4" to 2". Available with or without seals integral to the bearing.* LBXT style Open bearing with steel sleeve for use with shaft on supports. Available as standard with resin retainer or stainless steel resin retainer. Sizes range from 1/2" to 2". Available with or without seals integral to the bearing.* LBXD/LBXF style Self-aligning bearing with resin retainer. Allows for 1º of misalignment of the bearing. Closed style available in sizes 3/16" to 2". Open style available in sizes 1/2" to 2". Available with or without seals integral to the bearing.* LUXD style Self-aligning LBXD style bearing mounted in an anodized aluminum housing. Available in sizes 1/4" to 2". Comes standard with grease fitting hole, integral seals, and retaining clips for easy replacement of bearing. Available with or without seals integral to the bearing.* LUXD/AJ style Self-aligning LBXD style bearing mounted in an adjustable anodized aluminum housing. This unit allows for adjustment of clearance. Available in sizes 1/4" to 2". Comes standard with grease fitting hole, integral seals, and retaining clips for easy replacement. Available with or without seals integral to the bearing.* LUXF style Self-aligning LBXF style bearing mounted in an aluminum housing. Available in sizes 1/4" to 2". Comes standard with grease fitting hole and integral seals. Available with or without seals integral to the bearing.* LTXD Two self-aligning LBXD style bearings mounted in an anodized aluminum housing. Available in sizes 1/4" to 1-1/2". Comes standard with grease fitting hole, integral seals, and retaining clips for easy replacement of bearings. Available with or without seals integral to the bearing.* LTXD/AJ style Two self-aligning LBXD style bearings mounted in an adjustable anodized aluminum housing. This unit allows for adjustment of clearance. Available in sizes 1/4" to 1-1/2". Comes standard with grease fitting hole, integral seals, and retaining clips for easy replacement of bearings. Available with or without seals integral to the bearing.* LTXF style The self-aligning LBXF style bearings mounted in an aluminum housing. Available in sizes 1/4" to 1-1/2". Comes standard with grease fitting hole and integral seals. Available with or without seals integral to the bearing.* * Seals do not add length to the bearing. 2

SKF shafting LJX Carbon steel shafting available in sizes 1/4" to 2". LJXR 42 stainless steel shafting available in sizes 1/4" to 2". LJXH Chrome plated shafting available in sizes 1/4" to 2".

5 SKF shafting LJX Carbon steel shafting available in sizes 1/4" to 2". LJXR 42 stainless steel shafting available in sizes 1/4" to 2". LJXH Chrome plated shafting available in sizes 1/4" to 2". LSXBL low shaft support rail AISI C-118 steel support rail for use with predrilled and tapped shafting and open style bearings. Comes in lengths of 48" long, in sizes 1/2" to 2". LSXS shaft end support Supports blocks for use on ends of shafting. Available in sizes 1/4" to 2". LSXB shaft support rail Aluminum support rail for use with predrilled and tapped shafting and open style bearings. Comes in lengths of 24" long, in sizes 1/2" to 2". Technical data Temperature The normal operating temperature range for the SKF linear ball bearings is from 2º 8º C (68º 176º F). The LBXR series with the steel retainer has an operating temperature range from 2º 11º C (68º 23º F). Fit The recoended for the housing bore is H7. Length s of shafting Shafting is stocked in lengths up to 2 ft. and is supplied to required lengths per the following chart; diameter length 36" length > 36" less than 2" ± 1/32" ± 1/16" 2" or larger ± 1/16" ± 1/8" Special length s are available upon request for all diameters. Life calculations The basic dynamic load rating C is used for the life calculations of linear ball bearings running under load. This gives the load which allows a rating life of 5km, without changing its magnitude and direction. The rating life can be obtained from the following equation: L= (C ) 3 5 P L=travel life (km) C=basic dynamic load rating (N) P=load (N) here the stroke length and frequency are constant, it is often easier to calculate the basic rating life in hours of operation using the following equation: L n = L s n 6 L n =nominal life in hours of operation L=travel life (km) s=stroke length (m) n=frequency of stroke per minute (cpm) 3

6 LBXR type Standard type This type is an dimension series mainly used in the U.S. LBXR 16 G - 2LS / HV6 type size retainer material blank = steel G = resin stainless steel seal blank = without seal 2LS = seals on both sides *4 rows for resin retainer type. 4 part number nominal standard stainless steel dr D number of shaft ball circuits diameter steel retainer resin retainer resin retainer LBXR 2G/HV6 4 1/8 LBXR 3G/HV6 4 3/16 LBXR 4 LBXR 4G LBXR 4G/HV6 3* 1/4 LBXR 6 LBXR 6G LBXR 6G/HV6 4 3/8 LBXR 8 LBXR 8G LBXR 8G/HV6 4 1/2 LBXR 1 LBXR 1G LBXR 1G/HV6 4 5/8 LBXR 12 LBXR 12G LBXR 12G/HV6 5 3/4 LBXR 16 LBXR 16G LBXR 16G/HV 6 1 LBXR 2 LBXR 2G LBXR 2G/HV /4 LBXR 24 LBXR 24G LBXR 24G/HV /2 LBXR 32 LBXR 32G LBXR 32G/HV6 6 2 LBXR /2 LBXR LBXR /μm /μm

7 LBXR type L B D D1 dr nominal shaft diameter 1/8 3/16 1/4 3/8 1/2 5/8 3/ /4 1-1/ / major dimension eccentricity radial clearance L B D 1 (maximum) / / /μm /μm basic load rating dynamic C lbs static Co lbs mass lbs , ,56 2, ,651 3, ,168 7, kg 2.25lbs 5

8 LBXR/AJ type Clearance adjustable type This type is an dimension series mainly used in the U.S. LBXR 16 G - 2LS / AJ HV6 type size stainless steel clearanceadjustable type retainer material G = resin seal blank = without seal 2LS = seals on both sides part number nominal standard stainless steel dr D number of shaft ball circuits diameter resin retainer resin retainer /μm /μm LBXR4G/AJ LBXR4G/AJHV6 4 1/ LBXR6G/AJ LBXR6G/AJHV6 4 3/8 LBXR8G/AJ LBXR8G/AJHV6 4 1/2 LBXR1G/AJ LBXR1G/AJHV6 4 5/ LBXR12G/AJ LBXR12G/AJHV6 5 3/4 LBXR16G/AJ LBXR16G/AJHV LBXR2G/AJ LBXR2G/AJHV /4 LBXR24G/AJ LBXR24G/AJHV /2 LBXR32G/AJ LBXR32G/AJHV * Accuracy is measured prior to machining clearance slot. 6

9 LBXR/AJ type L B D D1 dr h nominal shaft diameter major dimension L B / / D 1 h / eccentrici ty / m radial clearance (maximum) /μm basic load rating dynamic C lbs static Co lbs mass lbs. 1/4 3/8 1/2 5/ / /4 1-1/ , kg 2.25lbs 7

10 LBXT type Open type This type is an dimension series mainly used in the U.S. LBXT 16 G - 2LS / HV6 type size retainer material G = resin stainless steel seal blank = without seal 2LS = seals on both sides part number nominal standard stainless steel dr D number of shaft ball circuits diameter resin retainer resin retainer LBXT8G LBXT8G/HV6 3 1/2 LBXT1G LBXT1G/HV6 3 5/ inc /μm /μm.5 13 LBXT12G LBXT12G/HV6 4 3/4 LBXT16G LBXT16G/HV6 5 1 LBXT2G LBXT2G/HV /4 LBXT24G LBXT24G/HV /2 LBXT32G LBXT32G/HV

11 LBXT type L B D D1 dr h nominal shaft diameter L / B major dimension / D 1 h / m Q eccentricity / radial clearance (maximum) /μm basic load rating dynamic C lbs static Co lbs mass lbs. 1/2 5/8 3/ /4 1-1/ , * Accuracy is measured prior to machining clearance slot. 1kg 2.25lbs 9

12 LBXD/LBXF type Self-aligning type This type is an dimension series mainly used in the U.S. LBXD 2-2LS LBXD = self-aligning closed LBXF = self-aligning open Closed 3/16" 2" size seal blank = without seal 2LS = seals on both sides Open 1/2" 2" part number closed type open type nominal shaft dimensions dr no. of ball mass no. of ball mass * circuits lbs circuits lbs major dimensions D L LBXD / LBXD ±.8 1/ LBXD / LBXD LBXF / LBXD LBXF / LBXD LBXF / LBXD LBXF LBXD LBXF / /.25 LBXD LBXF / /.3 LBXD LBXF / /.4 *Based on nominal housing bore. The LBXD/LBXF linear bearings can be prelubricated as per customer requirements for 5+ pieces

13 LBXD/LBXF type D D1 dr self-aligning 1 in all directions B L h 3 O major dimension basic load rating nominal shaft diameter B / D 1 open type h dynamic C lbs static Co lbs 3/ / / / / / ,6 1-1/ / ,23 1,53 1-1/ / ,48 1, / ,43 3,4 1 =25.4 1lbs.454kg 1 lbs 4.448N 11

LUXD type Block type This type is an dimension series mainly used in the U.S. LUXD 2-2LS type size blank = without seals seals on both sides 4-S E±.12 B±.1 L C±.1 G T h±.

14 LUXD type Block type This type is an dimension series mainly used in the U.S. LUXD 2-2LS type size blank = without seals seals on both sides 4-S E±.12 B±.1 L C±.1 G T h±.12 F self-aligning 1 in all directions M oil hole* basic load rating nominal part number shaft major dimensions mounting dimensions dynamic static mass diameter h E L F T G M B C S C Co lbs. lbs lbs. LUXD4-2LS 1/ LUXD6-2LS 3/ LUXD8-2LS 1/ LUXD1-2LS 5/ LUXD12-2LS 3/ LUXD16-2LS LUXD2-2LS 1-1/ LUXD24-2LS 1-1/ LUXD32-2LS * Provided with push-in oil fitting for 1/4 to 1/2 sizes. Sizes from 5/8 to 2 offer a 1/4-28 tapped hole with a plug for adding a fitting if desired. 1 =25.4 1lbs.454kg 1 lbs 4.448N 12

15 LUXD/AJ type Clearance adjustable block type This type is an dimension series mainly used in the U.S. LUXD 2-2LS / AJ type size clearanceadjustable type blank = without seals seals on both sides 4-S E±.12 B±.1 L C±.1 G T h±.12 F self-aligning 1 in all directions M oil hole* basic load rating nominal part number shaft major dimensions mounting dimensions dynamic static mass diameter h E L F T G M B C S C Co lbs. lbs lbs. LUXD4-2LS/AJ 1/ LUXD6-2LS/AJ 3/ LUXD8-2LS/AJ 1/ LUXD1-2LS/AJ 5/ LUXD12-2LS/AJ 3/ LUXD16-2LS/AJ LUXD2-2LS/AJ 1-1/ LUXD24-2LS/AJ 1-1/ LUXD32-2LS/AJ * Provided with push-in oil fitting for 1/4 to 1/2 sizes. Sizes from 5/8 to 2 offer a 1/4-28 tapped hole with a plug for adding a fitting if desired. 1 =25.4 1lbs.454kg 1 lbs 4.448N 13

16 LTXD type Tandem block type This type is an dimension series mainly used in the U.S. LTXD 2-2LS type size blank = without seals seals on both sides 4-S E±.12 B±.1 L C±.1 G T h±.12 F M oil hole* basic load rating nominal part number shaft major dimensions mounting dimensions dynamic static mass diameter h E L F T G M B C S C Co lbs. lbs lbs. LTXD4-2LS 1/ LTXD6-2LS 3/ LTXD8-2LS 1/ LTXD1-2LS 5/ LTXD12-2LS 3/ LTXD16-2LS LTXD2-2LS 1-1/ LTXD24-2LS 1-1/ * Provided with push-in oil fitting for 1/4 to 1/2 sizes. Sizes from 5/8 to 2 offer a 1/4-28 tapped hole with a plug for adding a fitting if desired. 1 =25.4 1lbs.454kg 1 lbs 4.448N 14

17 LTXD/AJ type Clearance adjustable tandem block type This type is an dimension series mainly used in the U.S. LTXD 2-2LS / AJ type size clearanceadjustable type blank = without seals seals on both sides 4-S E±.12 B±.1 L C±.1 G T h±.12 F M oil hole* nominal basic load rating part number shaft major dimensions mounting dimensions dynamic static mass diameter h E L F T G M B C S C Co lbs. lbs lbs. LTXD4-2LS/AJ 1/ LTXD6-2LS/AJ 3/ LTXD8-2LS/AJ 1/ LTXD1-2LS/AJ 5/ LTXD12-2LS/AJ 3/ LTXD16-2LS/AJ LTXD2-2LS/AJ 1-1/ LTXD24-2LS/AJ 1-1/ * Provided with push-in oil fitting for 1/4 to 1/2 sizes. Sizes from 5/8 to 2 offer a 1/4-28 tapped hole with a plug for adding a fitting if desired. 1 =25.4 1lbs.454kg 1 lbs 4.448N 15

18 LUXF type Open block type This type is an dimension series mainly used in the U.S. LUXF 2-2LS type size blank = without seals seals on both sides E±.12 4-S B±.1 L C±.1 F T h±.12 3 G h1 M oil hole* self-aligning 1 in all directions nominal basic load rating part number shaft major dimensions mounting dimensions dynamic static mass diameter h E L F T G M h1 B C S C Co lbs. lbs lbs. LUXF8-2LS 1/ LUXF1-2LS 5/ LUXF12-2LS 3/ LUXF16-2LS LUXF2-2LS 1-1/ LUXF24-2LS 1-1/ LUXF32-2LS * Provided with push-in oil fitting for 1/4 to 1/2 sizes. Sizes from 5/8 to 2 offer a 1/4-28 tapped hole with a plug for adding a fitting if desired. 1 =25.4 1lbs.454kg 1 lbs 4.448N 16

LTXF type Tandem open block type This type is an dimension series mainly used in the U.S. LTXF 2-2LS type size blank = without seals seals on both sides 4-S E±.12 B±.1 L C±.1 F T h±.

19 LTXF type Tandem open block type This type is an dimension series mainly used in the U.S. LTXF 2-2LS type size blank = without seals seals on both sides 4-S E±.12 B±.1 L C±.1 F T h±.12 3 G h1 M oil hole* nominal basic load rating part number shaft major dimensions mounting dimensions dynamic static mass diameter h E L F T G M h1 B C S C Co lbs. lbs lbs. LTXF8-2LS 1/ LTXF1-2LS 5/ LTXF12-2LS 3/ LTXF16-2LS LTXF2-2LS 1-1/ LTXF24-2LS 1-1/ * Provided with push-in oil fitting for 1/4 to 1/2 sizes. Sizes from 5/8 to 2 offer a 1/4-28 tapped hole with a plug for adding a fitting if desired. 1 =25.4 1lbs.454kg 1 lbs 4.448N 17

20 Inch shafting t2 Ød Ra=.25 t1 t3/foot shaft type size class ESSC LJX 4 x length CS ESSC 1 LJX = Steel LJXR = Stainless steel LJXH = Chrome plated LJXT = Hollow shaft 4 = 1/4" 6 = 3/8" 8 = 1/2" 1 = 5/8" 12 = 3/4" 16 = 1" 2 = 1-1/4" 24 = 1-1/2" 32 = 2" length in es ESSC 1 = cut ESSC 2 = chamfered ESSC 3 = chamfered to customers specs ESSC 4 = one axial hole ESSC 5 = two axial holes ESSC 6 = predrilled and tapped (PDT) ESSC 7 = radial holes per customer print ESSC 8 = PDT shaft mounted on shaft support /D = per customer drawing CS = class S blank = class L CN = class N CD = class D Inch shafting from SKF is manufactured in a variety of types and sizes to suit particular applications. Material e offer precision hardened and ground carbon steel shafting (material Ck55, AISI 155), as well as chrome plated and 42C stainless steel shafting. Hardness The shaft surface hardness is from 6 to 64 HRc for the carbon steel shafting, and 5 to 55 HRc for the stainless steel shafting. Please see chart below for hardening depth. Tolerances e offer Class L and Class S as a standard, but can also supply Class N and Class D on special requests. Accessories A standard range of shaft support rails and shaft support blocks are available. e also offer custom machining of shafts to your specifications. Designations hen ordering, please specify requirements in accordance with the chart at top right. part number prefix shaft diameter d hardening depth Rht (max) DIN6773 class L class S class N standard ISO h6 weight roundness per (circular) length t1 parallelism t2 straightness t3 LJX 4 1/ / / / LJX 6 3/ / / / LJX 8 1/ / / / LJX 1 5/ / / / LJX 12 3/ / / / LJX / / / LJX 2 1-1/ / / / LJX / / / / LJX / / /

21 ESSC shafting standard ESSC 1 Cut with no chamfer, deburr only. ESSC 2 Cut with hand chamfer. If no specification is given, this is the standard. ESSC Cut with chamfer according to customer drawing. ESSC 4 Cut with chamfer and one axial hole. Please specify thread size and depth. ESSC 5 Cut with chamfer and two axial holes. Please specify thread size and depth. Y Y X X ESSC 6 Cut and chamfer as ESSC 2 with radial holes per table below. ESSC 7 As ESSC 6, but with radial holes, and X and Y according to customer drawing. Y X ESSC 8 As ESCC 6, shaft mounted on LSXB shaft support. nom. diameter max. "X" hole tap dia. one spacing size piece +/-.15 (to center length (non-cumulative) of shaft) 1/2.499/ /8.624/ /4.749/ / / / / / / / / / /

LSXB type Shaft support rail Inch series C A G Ø F Ø X D Y E B Material: 661 T6 aluminum Standard length for all LSXB/LSXC shaft supports is 24" part number shaft diameter A +/-.

22 LSXB type Shaft support rail Inch series C A G Ø F Ø X D Y E B Material: 661 T6 aluminum Standard length for all LSXB/LSXC shaft supports is 24" part number shaft diameter A +/-.2 B C D E dimensions in es hole spacing F G wt. per 24 Y X bolt hole bolt hole (lbs) LSXB 8 1/ /2 1/4 3/ # X7/ LSXB 1 5/ /8 5/16 1/4 1-1/8 2 4 # X7/ LSXB 12 3/ /4 3/8 1/4 1-1/4 3 6 # X1-1/ LSXB /8 1/2 1/4 1-1/ / /4-2X1-1/ LSXB 2 1-1/ /2 9/16 5/16 1-7/ / /16-18X1-3/ LSXB / /16 3/8 2-1/ / /8-16X LSXB /4 7/8 1/2 2-3/ /8.46 1/2-13X2-1/ All sizes available without pre-drilled mounting holes. Specify part number as LSXC ## when ordering. Complete shaft-rail assemblies are also available as well as custom drilling and lengths. Please send drawing for quotation on custom configurations. 2

LSXBL type Low shaft support rail Inch series A C 2º X D Y B Material: AISI C-118 steel Standard length for all LSXBL/LSXCL shaft supports is 48" dimensions in es part number shaft diameter A ±.2 B ±.

23 LSXBL type Low shaft support rail Inch series A C 2º X D Y B Material: AISI C-118 steel Standard length for all LSXBL/LSXCL shaft supports is 48" dimensions in es part number shaft diameter A ±.2 B ±.5 C (ref) D hole spacing wt. per 48" (lbs.) bolt hole Y X LSXBL LSXBL LSXBL LSXBL / LSXBL / LSXBL / LSXBL / / All sizes available without pre-drilled mounting holes. Specify part number as LSXCL## when ordering. Complete shaft-rail assemblies are also available as well as custom drilling and lengths. Please send drawing for quotation on custom configurations. 21

24 LSXS type Shaft end support Inch series A F 2-I D h E G C B Material: Aluminum alloy dimensions in es part shaft h A B C D E F G I bolt mass number diameter +/-.1 +/-.1 (lbs) LSXS 4 1/ # 6.33 LSXS 6 3/ # 6.46 LSXS 8 1/ # 8.77 LSXS 1 5/ # LSXS 12 3/ # LSXS /4.3 LSXS 2 1-1/ /16.56 LSXS / /16.75 LSXS /

25 Linear bearing interchange Contact SKF for LSR interchanges and availability. SKF designation standard THOMSON designation LBXR 4 or LBXR 4 G A-4812 LBXR 6 or LBXR 6 G A-6114 LBXR 8 or LBXR 8 G A-8142 LBXR 1 or LBXR 1 G A LBXR 12 or LBXR 12 G A LBXR 16 or LBXR 16 G A LBXR 2 or LBXR 2 G A LBXR 24 or LBXR 24 G A LBXR 32 or LBXR 32 G A LBXR 4 A-468 LBXR 48 A LBXR 64 A Adjustable type LBXR 8 G/AJ LBXR 1 G/AJ LBXR 12 G/AJ LBXR 16 G/AJ LBXR 2 G/AJ LBXR 24 G/AJ LBXR 32 G/AJ Open type LBXT 8 G LBXT 1 G LBXT 12 G LBXT 16 G LBXT 2 G LBXT 24 G LBXT 32 G Self-aligning type Closed type LBXD 4 LBXD 6 LBXD 8 LBXD 1 LBXD 12 LBXD 16 LBXD 2 LBXD 24 LBXD 32 ADJ-8142 ADJ ADJ ADJ ADJ ADJ ADJ OPN-8142 OPN OPN OPN OPN OPN OPN SUPER-4 SUPER-6 SUPER-8 SUPER-1 SUPER-12 SUPER-16 SUPER-2 SUPER-24 SUPER-32 SKF designation THOMSON designation Stainless steel type with resin retainer Closed type LBXR 4 G/HV6 LBXR 6 G/HV6 LBXR 8 G/HV6 LBXR 1 G/HV6 LBXR 12 G/HV6 LBXR 16 G/HV6 Adjustable type LBXR 8 G/AJHV6 LBXR 1 G/AJHV6 LBXR 12 G/AJHV6 LBXR 16 G/AJHV6 Open type LBXT 8 G/HV6 LBXT 1 G/HV6 LBXT 12 G/HV6 LBXT 16 G/HV6 Inch series self-aligning units Block type LUXD 4-2LS LUXD 6-2LS LUXD 8-2LS LUXD 1-2LS LUXD 12-2LS LUXD 16-2LS LUXD 2-2LS LUXD 24-2LS LUXD 32-2LS Adjustable type LUXD 4-2LS/AJ LUXD 6-2LS/AJ LUXD 8-2LS/AJ LUXD 1-2LS/AJ LUXD 12-2LS/AJ LUXD 16-2LS/AJ LUXD 2-2LS/AJ LUXD 24-2LS/AJ LUXD 32-2LS/AJ A-4812-SS A-6114-SS A-8142-SS A SS A SS A SS ADJ-8142-SS ADJ SS ADJ SS ADJ SS OPN-8142-SS OPN SS OPN SS OPN SS SPB-4 SPB-6 SPB-8 SPB-1 SPB-12 SPB-16 SPB-2 SPB-24 SPB-32 SPB-4-ADJ SPB-6-ADJ SPB-8-ADJ SPB-1-ADJ SPB-12-ADJ SPB-16-ADJ SPB-2-ADJ SPB-24-ADJ SPB-32-ADJ Open type Open type LBXF 8 SUPER-8-OPN LBXF 1 SUPER-1-OPN LUXF 8-2LS SPB-8-OPN LBXF 12 SUPER-12-OPN LUXF 1-2LS SPB-1-OPN LUXF 12-2LS SPB-12-OPN LBXF 16 SUPER-16-OPN LBXF 2 SUPER-2-OPN LUXF 16-2LS SPB-16-OPN LBXF 24 SUPER-24-OPN LUXF 2-2LS SPB-2-OPN LUXF 24-2LS SPB-24-OPN LBXF 32 SUPER-32-OPN LBXF 8-2LS SUPER-8-OPN-DD LUXF 32-2LS SPB-32-OPN LBXF 1-2LS SUPER-1-OPN-DD LBXF 12-2LS SUPER-12-OPN-DD LBXF 16-2LS SUPER-16-OPN-DD *Notes: 1) All the linear bearings are available with 2 integral seals. 2) Not all the linear bearings we offer are shown in this table. Please check catalog for all available sizes/options. SKF designation THOMSON designation Inch series self-aligning double wide units Block type LTXD 4-2LS LTXD 6-2LS LTXD 8-2LS LTXD 1-2LS LTXD 12-2LS LTXD 16-2LS LTXD 2-2LS LTXD 24-2LS Adjustable type LTXD 4-2LS/AJ LTXD 6-2LS/AJ LTXD 8-2LS/AJ LTXD 1-2LS/AJ LTXD 12-2LS/AJ LTXD 16-2LS/AJ LTXD 2-2LS/AJ LTXD 24-2LS/AJ Open type LTXF 8-2LS LTXF 1-2LS LTXF 12-2LS LTXF 16-2LS LTXF 2-2LS LTXF 24-2LS End support blocks LSXS 4 LSXS 6 LSXS 8 LSXS 1 LSXS 12 LSXS 16 LSXS 2 LSXS 24 LSXS 32 Shaft support predrilled LSXB 8 LSXB 1 LSXB 12 LSXB 16 LSXB 2 LSXB 24 LSXB 32 Shaft support not drilled LSXC 8 LSXC 1 LSXC 12 LSXC 16 LSXC 2 LSXC 24 LSXC 32 TN-4 TN-6 TN-8 TN-1 TN-12 TN-16 TN-2 TN-24 TN-4-ADJ TN-6-ADJ TN-8-ADJ TN-1-ADJ TN-12-ADJ TN-16-ADJ TN-2-ADJ TN-24-ADJ TN-8-OPN TN-1-OPN TN-12-OPN TN-16-OPN TN-2-OPN TN-24-OPN SB-4 SB-6 SB-8 SB-1 SB-12 SB-16 SB-2 SB-24 SB-32 SR 8-PD SR 1-PD SR 12-PD SR 16-PD SR 2-PD SR 24-PD SR 32-PD SR8 SR1 SR12 SR16 SR2 SR24 SR32 23

26 Notes: 24

SKF USA Inc 153 Valley Center Parkway Bethlehem, PA 1817-2266

com/linearballbearings SKF is a registered trademark of SKF USA

publisher and may not be reproduced (even extracts) unless prior

Every care has been taken to ensure the accuracy of the

be accepted for any loss or damage whether direct, indirect or

27 SKF USA Inc 153 Valley Center Parkway Bethlehem, PA Fax SKF is a registered trademark of SKF USA Inc. The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of use of the information contained herein. 22 SKF USA Inc. Publication 98-7 (1M/AN 3/27) Version 3/27 Printed in USA

LINEAR MOTION SYSTEM COMPONENTS

R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEM COMPONENTS LINEAR MOTION SYSTEM COMPONENTS PIC Design has added a most comprehensive selection of precision components for linear motion applications.