STANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES
|
|
|
- Arron Marsh
- 5 years ago
- Views:
Transcription
1 STANDARD SPECIFICATION STRAIGHT THROUGH TYPE BALL- VAVLE 301K SERIES
2 STANDARD SPECIFICATION BALL VALVE STRAIGHT- THROUGH TYPE 301K SERIES GENERAL The 301K series provides ball valves with a special inner valve which can be fully opened or closed by simply causing the stem to make 90 0 turn. The off take from a ball valve, when totally opened, has the same bore as the pipeline and its fluid resistance is negligible. For this reason this automatic valve is best suited to ON-OFF service. Controlling various types of liquid, gas and slurry. STANDARD SPECIFICATION. Body Type: 2 Way Full Bore, 2 Way Reduced Bore Size: Full Bore Type 1/2 to 36 (15-900mm) Reduced Bore type: 4 x 3 to 36 x 32 (100x80 To 900x800mm) Steam jacket type (L Class Body Only) Size 1/2 to 6 (15 to 150mm) Ratting: L Class: ANSI 150#, JIS 10K Size for Floating Type: 1/2 to 8 Size for Trunnion Type:10 to36 M Class: ANSI 300#, JIS 20K Size for Floating Type: 1/2 to 6 Size for Trunnion Type:8 to36 Connection: Flanged (RF & FF) Face to Face Dimensions: As per API 6D : FC25, SCPH2, SCS13A, SCS14A When Body is FC25, only L Class Floating type is available. Bonnet: Standard type To C Steam jacket type: Maximum working pressure: 10Kgf/cm 2 G Gland Packing: Teflon V Ring, Teflon Asbestos Gasket: Teflon, Asbestos, Pillar foil Page: 1
3 ACTUATOR SPECIFICATION Specification Purpose Supply Piping / Tubing Connections Control Signal Opened Or Closed Table 1; Body / Trim material Combinations, & Table 1-1 FLOATING TYPE Table 1-1A L Class Body / Valve Size 1/2 to 4 (15-100mm) Body SUS316 SUS316 SUS316 Treatment Buffing Buffing Buffing Stem SUS316 SUS316 SUS316 SUS316 SUS316 SUS316 Treatment Chrome Plated Chrome Plated Chrome Plated Type T Type F Type C Type Carbonfiber Pure Teflon MoS2 Table 1-1B JIS/ASTM ANSI Class 150 / JIS10K SCPH2/A216WCB, SCS13A,SCS14A/A351-CF8M SCPH2 Body -5 To To To +200 SCS13A Body -20 To To To +200 SCS14A Body -20 To To To +200 L Class Body / Valve Size 5 to 8 ( mm) Body JIS/ASTM SCPH2/A216WCB, SCS13A/A351-CF8M SCS13A SCS13A SCS13A SCS14A SCS14A SCS14A Treatment Buffing Buffing Buffing Buffing Buffing Buffing Stem SUS304 * SUS304 * SUS304 * SUS316 SUS316 SUS316 Double Acting ANSI Class 150 / JIS10K Spring Return Action Fully opened or closed by On - Off Signal Air to valve closed or Air to valve opened Ambient Painting Option Model Pneumatic Cylinder 6300RB, 6400,6500 On - Off Air Supply : 4 to 6 Kg/Cm2 Rc 1/8 (For Cylinder Size 60 to 90),Rc 1/4, Rc 3/8, Rc 1/2, Rc 1, Rc 1 1/2 On - Off Signal by Air 90 Deg -20 to 60 Deg C Munsell N-6 (Epoxy resin group) Solenoid Valve, Air set, Speed Controller, Lock - Up -Valve, Limit Switch, Manual handle Optional special specifications (Additional cost is required) Special testing ( Certificate, Non-Destructive tive testing, Radiographic testing) Oxygen Clean Sand / Dust proof Cold area proof Tropical area proof No copper alloy Special Piping & fitting Vacuum Service SUS bolts/nuts for exposed parts Non standard painting SCS14A/ A351-CF8M SUS316 SUS316 SUS316 SUS316 SUS316 SUS316 Treatment Chrome Plated Chrome Plated Chrome Plated Chrome Plated Chrome Plated Chrome Plated Type T Type F Type C Type T Type F Type C Type Pure Teflon MoS2 Pure Teflon MoS2 SCPH2 Body -5 To To To +200 SCS13A Body -20 To To To To To To +250 SCS14A Body -20 To To To
4 Table 1-1C.1 M Class Body / Valve Size 1/2 to 4 (15-100mm) Valve Size 1/2" To 4" ( 15 TO 100mm) ANSI Class 300 / JIS20K Body JIS/ASTM SCPH2/A216WCB, SCS13A SCS14A/ A351-CF8M Stem SUS316 SUS316 SUS316 SUS316 Treatment Buffing Buffing Buffing Buffing SUS630 SUS630 SUS316 SUS316 Treatment Heat Treatment Heat Treatment SUS316 SUS316 SUS316 SUS316 Treatment Chrome Plated Chrome Plated Chrome Plated Chrome Plated Type F Type C Type F Type C Type MoS2 MoS2 SCPH2 Body -5 To To +250 SCS13A Body -20 To To To To +250 Table 1-1C.2 M Class Body / Valve Size 5 to 6 ( mm) Valve Size 5" To 6" ( 125 TO 150mm) ANSI Class 300 / JIS20K Body JIS/ASTM SCPH2/A216WCB, SCS13A SCS14A/ A351-CF8M SCS13A SCS13A SCS14A SCS14A Stem Treatment Buffing Buffing Buffing Buffing SUS630 SUS630 SUS316 SUS316 Treatment Heat Treatment Heat Treatment SUS316 SUS316 SUS316 SUS316 Treatment Chrome Plated Chrome Plated Chrome Plated Chrome Plated Type F Type C Type F Type C Type MoS2 MoS2 SCPH2 Body -5 To To +250 SCS13A Body -20 To To To To +250 Table 1-2 TRUNNION TYPE Table 1-2A L Class Body / Valve Size 10 to 36 (250 To 900 mm) ANSI Class 150 / JIS10K Body JIS/ASTM SCPH2/A216WCB, SCS13A SCS14A/ A351-CF8M SCS13A SCS13A SCS14A SCS14A Stem Treatment Buffing Buffing Buffing Buffing SUS304 SUS304 SUS316 SUS316 Treatment SUS316 SUS316 SUS316 SUS316 Treatment Chrome Plated Chrome Plated Chrome Plated Chrome Plated Type F Type C Type F Type C Type MoS2 Carbonfiber MoS2 Back Ring NBR VITON NBR VITON VITON VITON SCPH2 Body -5 To To To To +170 SCS13A Body -20 To To To To To To
5 Table 1-2B M Class Body / Valve Size 8 to 36 (200 To 900 mm) Body JIS/ASTM SCPH2/A216WCB, SCS13A SCS14A/ A351-CF8M Stem SCS13A SCS13A SCS14A SCS14A Treatment Buffing Buffing Buffing Buffing SUS630 SUS630 SUS316 SUS316 Treatment Heat Treatment Heat Treatment SUS316 SUS316 SUS316 SUS316 Treatment Chrome Plated Chrome Plated Chrome Plated Chrome Plated Type F Type C Type F Type C Type Table: 2 Cv Value (90 o Opening) L Class Body and M Class Body Full Bore Type MoS2 Carbonfiber MoS2 Reduced Port Type Inch mm Rated Cv Inch mm Rated Cv Inch mm Rated Cv 1 2 (15) (350) x3 100x (20) (400) x4 125x (25) (450) x5 150x (40) (500) x6 200x (50) (550) x8 250x (65) (600) x10 300x (80) (650) x12 350x (100) (700) x14 400x (125) (750) x16 450x (150) (800) x18 500x (200) (850) x20 600x (250) (900) x24 750x (300) x30 900x Back Ring NBR VITON NBR VITON VITON VITON SCPH2 Body -5 To To To To +170 SCS13A Body -20 To To To To To To +170 Fig: 1 -Pressure Rating Fig: 1-1 Floating Type ( Size 1/2 to 8 ) Fig: 1-2 Floating Type ( Size 1/2 to 8 ) F Type (Pure Teflon) F -Type (Reinforced Teflon MoS2 ) 4
6 Fig: 1-3 Floating Type ( Size 1/2 to 8 ) C -Type (Carbon fiber Teflon) Fig: 1-4 Trunnion Type ( Size 8 to 36 ) F&C -Type / VITON Back Ring Fig: 1-5 Trunnion Type ( Size 8 to 36 ) F&C -Type / NBR Back Ring Fig: 2 Gasket / Pressure rating Fig: 2-1 Teflon (VAL7010) Fig: 2-2Asbestos (VAL 1500AC) Fig: 2-3 Pillar foil (P6631) 5
7 Fig: 3 Gland Packing / Pressure rating Fig: 3-1 Teflon Asbestos (P4513+P4513L) Fig: 3-2 Pillar foil (P6616A+P316) Oxidizing Fluids (P4514+P#2S) Fig: 4 Body section view Straight Through Floating Type Straight Through Trunnion Type 1/2" to 6" 8" to 36" No: Description No: Description No: Description No: Description 1 Body 9 Gland Packing 17 Spring Washer 25 Thrust ring 2 Body Cap 10 Gland Ring 18 Stem Key 26 Bottom Gasket 3 11 Gland Flange 19 O- Ring 27 Bottom Flange 4 Seat Ring 12 Gland Plate 20 Seat Holder 28 Bottom Stud 5 Stem 13 Gland Stud 21 Retainer 29 Spring Washer 6 Body Gasket 14 Gland Nut 22 Bottom 30 Bottom Nut 7 Stem 15 Body Stud 23 Hex. Socket Screw 31 Foil Ribbon Pack 8 Packing Seat 16 Body Nut 24 Bottom Guide 32 Coil Spring 6
8 Straight Through Trunnion Type Straight Through Trunnion Type Fire Safe Design (Three Piece Design) Fire Safe Design (Two Piece Design) 20" to 36" 6" to 18" 7
Ceramic Trim Angle Control Valves
No. SS2-8113-2610 Ceramic Trim Angle Control Valves Model HAF OVERVIEW Model HAF ceramic trim angle control valves provide the valve plug and sheet ring employing high performance ceramic with excellent
CV3000 Series Low-Noise Cage type Control Valve Model ACN
No. SS2-ACN110-0100 CV3000 Series Low-Noise Cage type Control Valve Model ACN OVERVIEW The model ACN low-noise cage type control valves are designed to reduce acoustic noise in services of compressible
WYECO. Y-Type Cylinder Actuated Valve. Model WY-C08YT-S
Y-Type Cylinder Actuated Valve Model WY-C08YT-S Model WY-C08YT-F Features Compact, Light weight, High quality High flow capacity Simple design, Easy to assembly Easy to install and maintain All stainless
CV3000 Series Pressure-Balanced Cage type Control Valve
No. SS2-ACP110-0100 OVERVIEW The model ACP pressure-balanced cage type control valves are designed for heavy duty service. The valve plug employs a pressure balance function to control high differential
Angle type Control Valves for High Pressure Service
No. SS2-HAH100-0100 Angle type Control Valves for High Pressure Service Model HAH OVERVIEWS The high service angle type control valves (model HAH) are rated at ANSI 2500 and hard alloy is employed to valve
Pneumatically-Operated, Single-Seated Control Valve
No. SS-ACT100-0100 OVERVIEW The NEW10-III is a compact, lightweight, and economical simple-function control valve designed for JIS10K process line. It is highly reliable and best suited for process con
Three Way Control Valves
No. SS2-HDT110-0100 Three Way Control Valves Model HDT OVERVIEW The valve model HDT is a three-way control valve for diverting service. It has a small-sized, high-output diaphragm motor which is suitable
CV3000 Series Pressure Balanced Cage type Control Valve
No. SS2-8113-1100 CV3000 Series Pressure Balanced Cage type Control Valve OVERVIEW Model HCB Pressure Balanced Cage Type Control Valves are designed for heavy duty services. The compact valve body, having
CV3000 Series Smart-Port Single Seated Control Valves Model HLC
CV3000 Series Smart-Port Single Seated Control Valves Model HLC OVERVIEW Model HLC Small-Port Cage Guide Type Single Seated Control Valves are designed for high differential pressure Service where fluid
Low leakage Pressure Balanced Cage type Control Valves Model AC2
No. SS2-AC2001-00 Low leakage Pressure Balanced Cage type Control Valves Model AC2 Overview The model AC2 low leakage pressure balanced cage type control valves are designed for heavy duty service. The
Labyrinth Trim Angle Control Valves
No. SS2-8113-2620 Labyrinth Trim Angle Control Valves Model HAL OVERVIEW Model HAL labyrinth trim angle control valves provide the valve plug with Labyrinth groove to restrict generation of cavitation
Cage type Single Seated Control Valves
No. SS-8-00 OVERVIEW Model HSC Cage Type Single Seated Control Valves are designed for high differential pressure heavy-duty service where flashing/cavitation may occur. Further, they are ideal for preventing
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION ON-OFF 2,3-WAY GLOBE VALVE YAD-112Q1/11231 Series YAC-31231 Series YAC-31281 Series http://www.proval.co.kr [B-8] GENERAL The single soft seat control valves are designed
Top-Guided Single Seated Control Valves (Rating : ANSI 600 or Less)
No. SS2-8-0 Top-Guided Single Seated Control Valves (Rating : ANSI 0 or Less) OVERVIEW Model VST control valves are suitable for use in fluid with slurry because of its one side guiding construction. Guide
Three Way Control Valves
No. SS2-MT100-0100 Three Way Control Valves Model MT OVERVIEW The valve model MT is a three-way control valve for diverting and mixing service. The actuator employed is of a multispring type and has a
SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
High Pressure Service Cage type Double Seated Control Valves (Rating: ANSI 900 to 2500)
High Pressure Service Cage type Double Seated Control Valves (Rating: ANSI 900 to 2500) Model VDC OVERVIEW Model VDC high pressure service control valve with body rating of ANSI 900, JIS 63K or up provides
Eccentric Rotary Control Valve (For size 1 to 4 inches)
No. SS2-VFR100-0200 FloWing Eccentric Rotary Control Valve (For size 1 to 4 inches) Model VFR OVERVIEW The eccentric rotary control valve, FloWing (model VFR), consists of a straight-through valve body
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
Eccentric Rotary Control Valve (For size 6 to 12 inches)
No. SS2-VFR100-0100 OVERVIEW FloWing Eccentric Rotary Control Valve (For size 6 to 12 inches) Model VFR The eccentric rotary control valve, FloWing (model VFR), consists of a straight-through valve body
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
PNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
Electric Top-Guided Single-Seated Control Valves
No. SS2-AGV200-0300 CV3000 Alphaplus series Electric Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV3000 Alphaplus range of top-guided single-seat control valves features a compact
Honeywell EN REV. 2 09/2014 Page 1 of 10 Specification
Series 9110 Single/Double Seated Globe Valves for ANSI 150-600 DIN/BS 4504 PN10-PN40 Honeywell 70-16-10-05 EN REV. 2 09/2014 Page 1 of 10 Specification Series 9110 Single/Double Seated Globe Valves for
NELES TRUNNION MOUNTED BALL VALVE SERIES D
NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience
Single Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
D1 Series Top Guided Single Seated Control Valves
D1 Series Top Guided Single Seated Control Valves Model D1S Overview Model D1S globe control valves are with bolted bonnet and top guided contoured trims. The design facilitates easy access to internal
KTM. Enhanced, proven design offers both control and block valve functions
KTM Enhanced, proven design offers both control and block valve functions Features Unique dual-v ball features a secondary (Small) V-notch allowing extremely small, accurate flow rates The primary (Large)
KTM Jacketed Ball Valves Full bore and Reduced bore
KTM jacketed ball valve, designed with full flange to flange welded jacket, to effectively maintain the temperature of the media Features General applications Temperature-dependent viscosity fluid: heavy
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
HSV SERIES 2-PIECE BALL VALVES
HSV SERIES 2-PIECE BALL VALVES Split Body metal seated ball valves for the Pulp and Paper and Power Industry. Design Pressure Rating 150# Available in Sizes 3 to 8 300# Available in Sizes 3 to 8 Valve
DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
Forged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
General applications Chemical plant, oil refinery, power plant, steam, Dowtherm, fused alkali, fuel oil and gas
KTM Gratite Seat i-temp Ball Valves KTM KTM s Gratite seat ball valve not only operates across an impressive range of temperatures, from -29 C to 500 C, it also boasts outstanding performance and a reliability,
SECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
SERIES 830T THREE WAY VALVE
SERIES 80T THREE WAY VALVE The series 80T three-way valve is designed for diverting service or mixing service applications. A diverting service valve takes common stream and splits it into two outlet ports.
BALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
CV3000 Alphaplus series Top and Bottom Guided Double-Seat Control Valves (6 to 12inches)
No. SS2-ADV100-0100 CV3000 Alphaplus series Top and Bottom Guided Double-Seat Control Valves (6 to 12inches) OVERVIEW Model ADVB / ADVM The CV3000 Alphaplus top and bottom guided double-seat control valves
KTM SERIES EB OM-2 SPLIT BODY FLOATING BALL VALVES
A new generation of ball valves with fugitive emission control and ISO mounting pad FEATURES GENERAL APPLICATIONS Pulp and paper, reactive monomers, oil and gas production, steam, hot gases, toxic and
Top-Guided Single-Seated Control Valves
No. SS-AGV00-000 CV000 Alphaplus series Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV 000 Alphaplus range of Top-guided Single-seat Control Valves features a compact valve body
BALL VALVES AND ACTUATORS E-CATALOG
BALL VALVES AND ACTUATORS E-CATALOG CONTENTS INTRODUCTION 3 MODEL SYSTEM 3-5 FLOATING TYPE SOFT SEATED BALL VALVE 6-8 CAST STEEL TRUNNION MOUNTED BALL VALVE 8-10 FORGED STEEL TRUNNION MOUNTED BALL VALVE
One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
Richter Sampling Valves
Richter Sampling Valves PA/F, PA/S Body ductile iron with PFA lining or investment cast stainless steel Bellows-sealed Safety packing gland Representative sampling Richter sampling valves Fields of application
RAM Company USA Products Line
RAM Company USA Products Line Trunnion Mounted Ball Valves Metal Seated Ball Valve 3-Way Ball Valve Jacket Ball Valve Ball Valves with Actuator Trunnion Mounted Ball Valves Main Features DOUBLE PISTON
SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
Air Operated Valve Control Valve
Air Operated Valve Control Valve -1 Step 0 Type/Structure/Features Please refer to this for structure and feature of Air Operated Valve and Control Valve. Step 1 Selection Please look at the ID chart to
Forged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
Valves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
KNIFE GATE VALVES -- MODEL D
PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several
KTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids
KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of
CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)
type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these
SERIES 17 3 & 4 WAY BALL VALVE
SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT
Valves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
HIGH PERFORMANCE BUTTERFLY VALVE
Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications
PRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
F20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
Model HIT. Corrosion-Resistant PTFE Body Control Valves OVERVIEW SPECIFICATIONS. No. SS
No. SS2-8193-0200 Corrosion-Resistant Body Control Valves Model HIT OVERVIEW The Corrosion Resistant Body Control Valves (model HIT) are best suited for handling corrosive fluids such as acids and alkali
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
Two-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
Three-Way Metal Seated Ball Valve Type 21-M
Three-Way Metal Seated Ball Valve Type 21-M Design Characteristics Split body Trunnion mounted ball with - or T-port and integral stem ive loaded stem packing Spring loaded seat system Fire Safe design
3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2" - 6" Stainless or Carbon Steel.
L/T-2100F-BF-CS Series L/T-2100F-BF-S6 Series Quick Spec Product Scope Size Range 1/2" - 6" 150# Flanged Ends Port Type Full Port Port Type L-Port or T-Port Port Orientation Side Entry Pressure Rating
Two-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
The series 10 butterfly valves has been developed for a large number of applications throughout process industries. The
Technical Bulletin B-100 Features Series 10 High Performance Feature Butterfly valves For Rating JIS 20K General : The series 10 butterfly valves has been developed for a large number of applications throughout
Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)
3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company
Top-Guided Single-Seated Control Valves
No. SS-AGV00-0001 (Rev.11) CV3000 Alphaplus series Top-Guided Single-Seated Control Valves Model AGVB / AGVM OVERVIEW The CV 3000 Alphaplus range of Top-guided Single-seat Control Valves features a compact
Introduction. Globe and Angle Body Control Valves. In Line Valve provides Solutions to Flow Control
Introduction Globe and Angle Body Control Valves In Line Valve provides Solutions to Flow Control In Line Valve Globe Control Valves use the variable area generated between the plug and seat to control
Series 41 Full Bore Seated Ball Valves for ANSI (PN20-100) DIN/BS 4504 PN10-PN100
Technical Bulletin B-410 Series 41 Full Bore Seated Ball Valves for ANSI 150 600 (PN20-100) DIN/BS 4504 PN10-PN100 Series 41 Features General Series 41 ball valves are off-the-shelf standard valves that
LCS6822 (Class 150) LCS7822 (Class 300)
Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
OpTB TM Trunnion Ball Valve
INTRODUCTION The Optimux OpTB brings the legendary and well proven robustness and dependability of the trunnion ball design to process control applications, no longer limited to a full port option, but
BBV Automatic or Manually Actuated Boiler Blowdown Valves DN15 to DN65
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development improvement of the product, we reserve the right to change the specification without
Series 2000 Control Valves Globe-Double Seated, Top & Bottom Guide
Product Specification PS100401 2010. 04 Series 2000 Control Valves Globe-ouble Seated, Top & Bottom Guide for promotes more tightness and heavy duty control Series 2000 Single Seated Globe Valve with Model
GLOBE 3 WAY CONTROL VALVE SERIES INTRODUCTION
GLOBE 3 WAY CONTROL VALVE SERIES - 130 INTRODUCTION Pneucon' 3 way control valves are used to combine two flows or to divert one flow into two outlets. They are designed to replace and perform the functions
TRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type
TRUNNION MOUNTED BALL VALVES API 6D & API 6A Side_Entry Ball Valve SE type Stem Stem Seals Body / Closure Gasket Ball Seat Seat Seal Side_Entry Ball Valve SE type TECHNICAL DESCRIPTION Description: ON/OFF
BUTTERFLY VALVE ST BUTTERFLY VALVE VALVES - 31
BUTTERFLY VALVE ST BUTTERFLY VALVE REVREV 6.2 6.2 / Nov. / Nov. 2017 2017 VALVES - 31 High Performance Butterfly Valve STHW STHL Size : 2 ~ 24 Type: Wafer, Lug Pressure Rating: Class 150, 300 Body Material:
International Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API
Two-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
Engineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
BALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Two-Way Soft Seated Ball Valve Type 14-S
Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design
KNIFE GATE VALVES -- MODEL A
PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat
Evans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
SV SERIES. Metal Seated Ball Valves
SV SERIES Metal Seated Ball Valves 1/2 THRU 12 ANSI 150# THRU ANSI 1500# FULL PORT AND REDUCED PORT UNI-DIRECTIONAL AND BI-DIRECTIONAL 316SS OR CARBON STEEL BODY LIVE LOADED STEM PACKING HIGH QUALITY CASTINGS
Ball Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
Type K03. Gate Valve Butt-Welded, Flanged DN PN Data Sheet Edition: EN 9 / together we are strong
PN 16 100 Gate Valve Butt-Welded, Flanged Data Sheet Edition: EN 9 / 2015 MPOWER Engineering, a.s. Pod vinicí 2028/20, Modřany, 143 00 Praha 4, CZ T: +420 225 371 300, F: +420 225 371 325 E: info@mpowergroup.eu,
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
M Series Floating Metal Seat Ball Valve
M Series Floating Metal Valve 1 M Series Floating Metal Valve Full Bore Two-piece Flanged Ends ANSI 150/300/600LB The A-T Controls M Series metal seat ball valve is designed for use in severe services
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations
CLARK SOLUTIONS 8P Series Pneumatic Actuated Ball Valves 1/4 to 4 Brass & Stainless Steel, 2-way & 3-way configurations www.clarksol.com SERIES 8P0O80/82/135/136 SERIES 8P0129/131(T,L) 80: Direct mount
BALL SECTOR VALVE of stainless steel 455 (459) series
Operation C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and
S E LV Ball Valves VA
VALVES Ball Valves VNE 18 2 - WAY BALL VALVE SPECIFICATIONS BALL VALVES BALL VALVES... Ball Valves are used in a wide variety of high pressure applications. Two factors make them popular. First, a full