SFM VAR 00. Electro-Magnetic Single Disc Clutch

Transcription

1 SM VR 00 haracteristics lectrically operated 1, 4, 10, V Single friction face ctivated by power on Utilisation oupling of a pulley or a shaft articularities No backlash or dry use No residual torque in disengaged position ixed OM inductor djustments irgap should be adjusted at installation Requires wear compensation Maintenance Manual SM 04 Mounting recautions entre the inductor Observe dimension M evice intended for horizontal or vertical use ower Supply or 4 volts versions only : (overexcitation) T (4V) 140 (10,V) eat issipation Joules/ycle ycles/r 6 Warner lectric + (0) W-4 1/18

2 SM VR 00 T S J IN 4 N 16 UROstandard Indirect rive IN 984 Tol. 9 Q R N U G 8 h9 K M O Sizes Nom. Torque [Nm] Max. Speed [min -1 ] ower 0[U=1/4/10,V] [W] 1, min Std 10/1/1 10/1/0 0//0 /0/ 0/40/4 40/0/60 0/60/80 max G or screw 4xM4 4xM 4xM6 4xM6 4xM8 4xM8 4xM J (1) or screw xm xm4 xm xm6 xm8 xm10 4xM1 K 1, 1,, , 46,, 64 M 4 6, 0,, 44 1 N O,, 4 6 0, 0, 0, 0, 0, 0, 0, Q R 8, S, 4,, 6 8 T,6 6, 9 9, U Inertia 1 [kgm ] 0, ,0001 0,000 0,001 0,0049 0,0140 0,060 Inertia [kgm ] 0, ,000 0,0008 0,00 0,006 0,019 0,00 Weight [kg] 0, 0,9 1,, 10 18, onnection eads able onnector Options (elivered without cable) poles, capacity : 0,/,mm Keyway according to ISO R / S 4 / IN / N -1, tolerance 9 (1) rmature, ixing J by screws IN984 (not provided) -09-W-4 1/18... Warner lectric + (0)

3 SM VR 10 haracteristics lectrically operated 1, 4, 10, V Single friction face ctivated by power on Utilisation oupling of a pulley or a shaft articularities No backlash or dry use No residual torque in disengaged position ixed inductor mounted on ball bearings djustments irgap should be adjusted at installation Requires wear compensation Maintenance Manual SM 04 Mounting recautions The anti-rotation device of the electromagnet shall be inserted in anti rotation slot, with a side play of 0, mm and a 1 mm play to the bottom. This avoids a normal stress on the ball-bearings. We strongly recommend to mount a damping elastic slot in the anti-rotation device in case of vibrations evice intended for horizontal or vertical use ower Supply or 4 volts versions only : (overexcitation) T (4V) 140 (10,V) Joules/ycle eat issipation ycles/r Warner lectric + (0) W-4 1/18

4 SM VR 10 Sizes Y X Y X J T1T UROstandard Indirect rive earing Mounted IN 984 Q N Tol 9 U S W Z K G Sizes Nom. Torque [Nm] Max. Speed [min -1 ] ower 0[U=1/4/10,V] [W] 1, , * min * Std 10/1/1 10/1/0 0//0 /0/ 0/40/4 40/0/60 40/0/60 * max G , J (1) or screw xm xm4 xm xm6 xm8 xm10 4xM1 K 1, 1,, , 8, 94 N 40 4, 49 61, , 0, 0, 0, 0, 0, 0, Q S , 1 T, U W , , 146 X 4,1 4,1 4,1, Y Z 1, 1, Inertia 1 [kgm ] 0, ,0001 0,000 0,001 0,0049 0,0140 0,060 Inertia [kgm ] 0, ,0009 0,001 0,004 0,000 0,006 0,06 Weight [kg] 0, 1,, 4,0,6 1,0, onnection eads able onnector Options (elivered without cable) poles, capacity : 0,/,mm Keyway according to ISO R / S 4 / IN / N -1, tolerance 9 (1) rmature, ixing J by screws IN984 (not provided) -09-W-4 1/18... Warner lectric + (0)

5 SM VR 01 V W T S IN 4 N UROstandard irect rive Q 1 R 8 g6 h9 Tol. 9 N J G U M K O Sizes Nom. Torque [Nm] Max. Speed [min -1 ] ower 0[U=1/4/10,V] [W] 1, min Std 10/1/1 10/1/0 0//0 /0/ 0/40/4 40/0/60 0/60/80 1 max min Std 10/1/1 10/1/0 0//0 /0/ 0/40/4 40/0/60 0/60/80 max G or screw 4xM4 4xM 4xM6 4xM6 4xM8 4xM8 4xM J K 1, 41 46,, 66, 8, , 84, 10, 119, M 4 6, 0,, 44 1 N O,, 4 6 0, 0, 0, 0, 0, 0, 0, Q R 8, S, 4,, 6 8 T 6, 6, 9 9, U M4 M4 M4 M6 M8 M10 M10 V 1,, 4 1,, W Inertia 1 [kgm ] 0, ,0001 0,0009 0,000 0,00 0,04 0,00 Inertia [kgm ] 0, ,000 0,0008 0,00 0,006 0,019 0,00 Weight [kg] 0,9 1,1,0,6 6,9 1,1 4, onnection eads able onnector Options (elivered without cable) poles, capacity : 0,/,mm Keyways according to ISO R / S 4 / IN / N - 1, tolerance 9 10 Warner lectric + (0) W-4 1/18

6 1 SM VR 11 Size Y X Y X 10-0 V W T1T UROstandard irect rive earing Mounted Q N Tol 9 J S M U Z K G Sizes Nom. Torque [Nm] Max. Speed [min -1 ] ower 0[U=1/4/10,V] [W] 1, * min * Std 10/1/1 10/1/0 0//0 /0/ 0/40/4 40/0/60 40/0/60 1* max min Std 10/1/1 10/1/0 0//0 /0/ 0/40/4 40/0/60 0/60/80 max G , J K 4, 60 68, 9, , 1, 149, M , , 146 N 40 4, 49 61, , 0, 0, 0, 0, 0, 0, Q S , 1 T, 6, U M4 M4 M4 M6 M8 M10 M10 V 1,, 4 1,, W X 4,1 4,1 4,1, Y Z 1, 1, Inertia 1 [kgm ] 0, ,0001 0,0009 0,000 0,00 0,04 0,00 Inertia [kgm ] 0, ,0009 0,001 0,004 0,000 0,006 0,06 Weight [kg] 0,9 1,4,6 4,6 9 16,1 8, onnection eads able onnector Options (elivered without cable) poles, capacity : 0,/,mm Keyways according to ISO R / S 4 / IN / N - 1, tolerance 9 * Mandatory delivered with finished bores -09-W-4 1/18... Warner lectric + (0)

7 10 VR 00 haracteristics lectrically operated 4 or 10, V depending size Single friction face ctivated by power on Utilisation oupling of two shafts in line articularities No backlash or dry use No residual torque in disengaged position ixed inductor mounted on ball bearings djustments irgap should be adjusted at installation oes not require wear compensation Maintenance Manual SM 0 Mounting recautions The anti-rotation device of the electromagnet shall be inserted in anti rotation slot, with a side play of 0, mm and a 1 mm play to the bottom. This avoids a normal stress on the ball-bearings. We strongly recommend to mount a damping elastic slot in the anti-rotation device in case of vibrations evice intended for horizontal use; for vertical use, please consult the factory ower Supply or sizes until 1600 : T or size 00: 140 Mounting xample nti-rotation evice ir Gap Spacer ir Gap 0,1 mm max. Joules/ycle eat issipation ycles/r 1 Warner lectric + (0) W-4 1/18

8 Q 10 VR mm min. 00 mm min. a 0 J Tol. 9 J M N S M N K K R R Size 0-00 Size (x 10) Sizes Nom. Torque [Nm] Max. Speed [min-1] Voltage [V] , ower 0 [W] * min * max min max J K 1, 19 4, M N , 0, 0, 0, 0,6 0,8 0,8 Q R a S Inertia 1 [kgm ] 0,000 0,008 0,04 0,06 0,14 0,1 0,81 Inertia [kgm ] 0,00 0,018 0,00 0,04 0,06 0,04 0,681 Weight [kg], 10,4 0 0,8 4, 9 10 onnection able irect rive onnector Options (elivered without cable) poles, capacity : 0,/,mm Keyways according to ISO R / S 4 / IN / N -1, tolerance 9 * Mandatory delivered with finished bore -09-W-4 1/18... Warner lectric + (0)

9 10 VR 0 haracteristics lectrically operated 4 or 10, V depending size Single friction face ctivated by power on xpected ball bearing life hours ccepts speeds of rotation superior to series 10 VR 00 Utilisation oupling of two shafts in line rom size 00, we recommend to engage the clutch at a lower speed (about 00 min -1 ) articularities No backlash or dry use No residual torque in disengaged position ixed inductor mounted on ball bearings djustments irgap should be adjusted at installation oes not require wear compensation Maintenance Manual SM 0 Mounting recautions evice intended for horizontal or vertical use The anti-rotation device of the electromagnet shall be inserted in anti rotation slot, with a side play of 0, mm and a 1 mm play to the bottom. This avoids a normal stress on the ball-bearings. We strongly recommend to mount a damping elastic slot in the anti-rotation device in case of vibrations ower Supply or sizes until 1600 : T or size 00 and up: eat issipation Joules/ycle ycles/r Warner lectric + (0) W-4 1/18

10 10 VR 0 J 00 mm min. Tol. 9 a Q 0 ong ife igh Speed irect rive S M X K R xcess Grease xit x 10 Sizes Nom. Torque [Nm] Max. Speed [min-1] Voltage [V] , 10, 10, ower 0 [W] * min * max min max J K M N , 0,6 0,8 0,8 1 1 Q R a S Inertia 1 [kgm ] 0,06 0,180 0,60 0,98,49,110 Inertia [kgm ] 0,04 0,06 0,04 0,681 1,9,690 Weight [kg],, onnection able onnector Options (elivered without cable) poles, capacity : 0,/,mm Keyways according to ISO R / S 4 / IN / N -1, tolerance 9 * Mandatory delivered with finished bores -09-W-4 1/18... Warner lectric + (0)

11 0 VR 00 haracteristics lectrically operated 4 or 10, V depending size Single friction face ctivated by power on Utilisation oupling of a pulley or a hub articularities No backlash or dry use No residual torque in disengaged position ixed inductor mounted on ball bearings djustments irgap should be adjusted at installation oes not require wear compensation Maintenance Manual SM 0 Mounting recautions The anti-rotation device of the electromagnet shall be inserted in anti rotation slot, with a side play of 0, mm and a 1 mm play to the bottom. This avoids a normal stress on the ball-bearings. We strongly recommend to mount a damping elastic slot in the anti-rotation device in case of vibrations evice intended for horizontal use; for vertical use, please consult the factory ower Supply or sizes until 1600 : T or size 00: 140 Mounting xample irgap adjust spacer ir GRMN istance Gap djust adjustment Spacer sleeve inger for nti-rotation locking the evice field ir Gap Joules/ycle eat issipation ycles/r 16 Warner lectric + (0) W-4 1/18

12 J S 0 VR mm min. K 00 mm min. K Q a G 0 U 8 S V X U 8 Tol 9 M N G J X V M N W R W R Size 0-00 Size x 10 Sizes Nom. Torque [Nm] Max. Speed [min-1] Voltage [V] , ower 0 [W] * min * max G 4xM6 6xM6 6xM8 6xM8 6xM10 8xM1 8xM J K 1, 19 4, , M N 18, 1, ,4 0, 0, 0, 0, 0,6 0,8 0,8 Q R a S U V 4 6 W Washer X max Inertia 1 [kgm ] 0,000 0,008 0,04 0,06 0,14 0,1 0,81 Inertia [kgm ] 0,00 0,018 0,00 0,04 0,06 0,04 0,68 Weight [kg], 10,4 0 0,8 4, 9 10 onnection able Indirect rive onnector Options (elivered without cable) poles, capacity : 0,/,mm Keyways according to ISO R / S 4 / IN / N -1, tolerance 9 * Mandatory delivered with finished bores -09-W-4 1/18... Warner lectric + (0)

13 0 VR 0 haracteristics lectrically operated 4 or 10, V, depending on size Single friction face ctivated by power on xpected ball bearing life hrs ccepts speeds of rotation superior to the series 0 VR 00 Utilisation oupling of a pulley or a hub rom size 00, we recommend to engage the clutch at a lower speed (about 00 min -1 ) articularities No backlash or dry use No residual torque in disengaged position ixed inductor mounted on ball bearings djustments irgap should be adjusted at installation oes not require wear compensation Maintenance Manual SM 0 Mounting recautions evice intended for horizontal use The anti-rotation device of the electromagnet shall be inserted in anti rotation slot, with a side play of 0, mm and a 1 mm play to the bottom. This avoids a normal stress on the ball-bearings. We strongly recommend to mount a damping elastic slot in the anti-rotation device in case of vibrations ower Supply or sizes until 1600 : T or size 00 and up: 140 Joules/ycle eat issipation ycles/r Warner lectric + (0) W-4 1/18

14 0 VR 0 SJ 00 mm min. V Tol 9 a Q 0 ong ife igh Speed Indirect rive 8 S M X U W G x 10 K R xcess Grease xit Sizes Nom. Torque [Nm] Max. Speed [min-1] Voltage [V] , 10, 10, ower 0 [W] * min * max G 6xM8 6xM10 8xM1 8xM1 8xM16 1xM J K M , 0,6 0,8 0,8 1 1 Q R a S U V W Washer X max Inertia 1 [kgm ] 0,06 0,180 0,60 0,98,49,110 Inertia [kgm ] 0,04 0,06 0,04 0,68 1,98,9 Weight [kg],, onnection onnector Options (elivered without cable) poles, capacity : 0,/,mm able Keyways according to ISO R / S 4 / IN / N -1, tolerance 9 * Mandatory delivered with finished bores -09-W-4 1/18... Warner lectric + (0)

15 0 VR 0 haracteristics lectrically operated 4 or 10, V depending size Single friction face ctivated by power on Utilisation oupling of two shafts in line rom size 00, we recommend to engage the clutch at a lower speed (about 00 min -1 ) articularities or dry use No residual torque in disengaged position ixed inductor mounted on ball bearings quipped with an elastic coupling djustments oes not require wear compensation Maintenance Manual SM 0 Mounting recautions The anti-rotation device of the electromagnet shall be inserted in anti rotation slot, with a side play of 0, mm and a 1 mm play to the bottom. This avoids a normal stress on the ball-bearings. We strongly recommend to mount a damping elastic slot in the anti-rotation device in case of vibrations evice intended for horizontal use, for vertical use please consult the factory ower Supply or sizes until1600 : T or size 00 and up: 140 Joules/ycle eat issipation ycles/r Warner lectric + (0) W-4 1/18

16 0 VR 0 00 mm min. R IT Z K S J U irect rive with lexible oupling 1 j6 O G Tol 9 I X Y X Sizes oupling Nom. Torque [Nm] ,00 6, Max. Speed [min-1] Voltage [V] , 10, 10, ower 0 [W] * min * max min max M10 M10 M10 M1 M1 M1 M , G I J K 4, O M0X1, MX1, M0X1, MX M60X M80X M90X R S T U X Y Z Inertia 1 [kgm ] 0,04 0,06 0,014 0,1 0,81,49,110 Inertia [kgm ] 0,01 0,084 0,1 0, 0,901, 10,080 Weight [kg], 1, 0, 8, onnection able Keyways according to ISO R / S 4 / IN / N -1, tolerance 9 * Mandatory delivered with finished bores onnector Options (elivered without cable) poles, capacity : 0,/,mm -09-W-4 1/18... Warner lectric + (0)

17 0 VR 06 haracteristics lectrically operated 4 or 10, V depending size Single friction face ctivated by power on Utilisation oupling of two shafts in line rom size 00, we recommend to engage the clutch at a lower speed (about 00 min -1 ) articularities or dry use No residual torque in disengaged position ixed inductor mounted on ball bearings quipped with an elastic coupling djustments oes not require wear compensation Maintenance Manual SM 0 Mounting recautions The anti-rotation device of the electromagnet shall be inserted in anti rotation slot, with a side play of 0, mm and a 1 mm play to the bottom. This avoids a normal stress on the ball-bearings. We strongly recommend to mount a damping elastic slot in the anti-rotation device in case of vibrations evice intended for horizontal use, for vertical use please consult the factory ower Supply or sizes until1600 : T or size 00 and up: 140 Joules/ycle eat issipation ycles/r Warner lectric + (0) W-4 1/18

18 R IT Z K S J U 1 0 VR 06 irect rive with lexible oupling O G Tol 9 I Y X O Sizes oupling Nom. Torque [Nm] Max. Speed [min-1] Voltage [V] ower 0 [W] * min * max M8 M8 M10 M10 M10 M1 M1 min max G I J K 1, 19 4, O 10, 1, 16, 0, 0, R S T U Z Inertia 1 [kgm ] 0,000 0,008 0,04 0,06 0,14 0,1 0,81 Inertia [kgm ] 0,00 0, ,084 0,1 0, 0,901 Weight [kg] 8, 14,, 1, 0, 8, 18 onnection able Keyways according to ISO R / S 4 / IN / N -1, tolerance 9 * Mandatory delivered with finished bores onnector Options (elivered without cable) poles, capacity : 0,/,mm -09-W-4 1/18... Warner lectric + (0)