AC Line. Spring-applied single-disc brake A H E00 / E00

Transcription

1 AC Line Spring-applied single-disc brake A H E00 / E00

2 AC Line Industrial Drive Systems Die Welt von Kendrion Industrial Drive Systems Kendrion the brake experts As a solution provider, Kendrion develops, produces and markets innovative and high-quality electromagnetic and mechatronic systems and components for customers all over the world. In the Industrial Drive Systems business unit, electromagnetic The former magneta GmbH & Co. KG belongs to the Kendrion brakes and clutches are developed and produced for industrial Group since As the present Kendrion (Aerzen) GmbH, drive engineering. They are used for the accelerating, braking, the innovative company continues to develop and produce positioning, holding and securing of movable drive components electromagnetic clutches and brakes along with magnetic and loads. Areas of application for our brakes and clutches particle clutches and brakes at its site in Aerzen. are primarily in the areas of robotic and automatic control engineering, machine tool and production machinery as well as Kobra greensigned safety brakes medical technology and material handling. As the first company, we at Kendrion developed safety brakes that contribute to the well-being of the environment in two Our main site is located in Villingen in the Black Forest, separate ways. The reduced energy consumption was just Germany. Industrial Drive Systems can also rely on additional as important to us as the ecology in the entire value-creation production sites and subsidiaries in Aerzen (Germany), China, process. The KOBRA (Kendrion Optimised Brake) spring- Great Britain and Italy, as well as numerous sales partners all applied safety brake is the impressive result, and the pioneer over the world. product of the Kendrion greensigned strategy. Tradition and progress The long-established BINDER brand laid the foundations for Kendrion We magnetise the world! the successful development of Industrial Drive Systems. In the year 1911, Wilhelm Binder founded his company and began at the start of the 1920s with the development and production of electromagnetic components. In 1997, the company was taken over by the Dutch group Schuttersveld N.V., today Kendrion N.V.. 2

3 About the AC Line The AC Line is comprised of spring-applied single-disc brakes which can be connected directly to an AC source (e.g. motor terminal box) without having to use a rectifier.the switching times of the AC Line brakes are characteristically shorter than DC operated brakes. Electromagnetically operated spring-applied braking generates the braking torque when voltage is removed. Versions A00 torque range 1-5 Nm single-phase AC H00 torque range Nm three-phase AC E00 torque range Nm three-phase AC adjustable torque closed version with connection cable E00 torque range Nm three-phase AC adjustable torque closed version with connection box Applications AC motors Equipment manufacturing industry Geared motors Handling technology Lifting and materials Crane construction Paper-making and printing machines Heavy machinery construction Gate drives Packaging machinery Data sheets General information The Operating Instructions must be strictly observed during the set-up of the machine (e.g. motor) and during the start-up, operation and maintenance of the brakes. The state-of-the-art brakes have been designed, built and tested in accordance with the requirements of DIN VDE 0580 concerning electromagnetic devices and components. Additional information on technical specifications given in the data sheets is included in the operating instructions. 3

4 AC Line Spring-applied single-disc brake Single-phase AC Version Standard rated voltage Protection Thermal class Rated torque Accessories (options) Note A00 230V AC, 50 Hz IP 54 (when installed under motor fan hood) F 1-5 Nm friction plate, hand release feature, mounting screws Specification subject to change without notice. The General technical information and the Operating instructions A00 must be strictly observed. Technical specifications Size Transmissible torque M 4 [Nm] speed n max [min -1 ] switching P max [kj/h] switching energy (Z = 1) W max [kj] Rated P s [VA] Coupling time (acc. to VDE 0580) t 1 Response times Disconnection time t 2 Moment of inertia armature and flange hub J [kgcm 2 ] Weight m [kg]

5 Dimensions [mm] release force F transport fixture (to be removed after brake installation) turned air gap flying leads 2x0.62mm 2 Size d d 1 d 2 d 3 d 4 (H7) d 5 d 6 b b 1 b 2 b ) /11 2) 2.8 4) ) /14 2) ) ) /15 2) ) Size h h 1 L L 1 L 2 L 3 s 3) s max M F [N] α x M x M4 ca. 26 ca x M5 ca. 42 ca. 6 1) Min. bore 2) bore 2) Shaft ISO fitting k6 ( 1), 2) ) 3) air gap up to friction disc replacement 4) Pre-bored in case of hubs with finished bore d 4 Accessories Size Friction plate Hand release feature with corrosion without corrosion protection protection Mounting screws Screw Rated torque Material number Screws per brake A A00902 ISO M3 x Nm A A A00940 ISO M4 x Nm A A A00940 ISO M5 x Nm

6 AC Line Spring-applied single-disc brake Three-phase AC Version Standard rated voltage Protection Thermal class Rated torque Accessories (options) Note H V AC 3~, 50 Hz IP 44 (when installed under motor fan hood) F Nm friction plate, hand release feature, flange, mounting screws Specification subject to change without notice. The General technical information and the Operating instructions H00 must be strictly observed. Technical specifications Size Transmissible torque M 4 [Nm] speed n max [min -1 ] switching P max [kj/h] switching energy (Z = 1) W max [kj] Rated P s [VA] Coupling time (acc. to VDE 0580) t 1 Response times Disconnection time t 2 Moment of inertia armature and flange hub J [kgcm 2 ] Weight m [kg]

7 Dimensions [mm] release force F 30 turned air gap cable 4x0.75mm 2 Size d d 1 d 2 d 3 d 4 (H7) d 5 d 6 d 7 (H9) d 8 d 9 d 10 d 11 b b 1 b 2 b 3 b ) / 10 2) / 22 3) x ) / 13 2) / 22 3) x ) / 22 2) / 38 3) x ) / 30 2) / 44 3) x Size b 5 b 6 b 7 b 8 h h 1 R L L 1 L 2 L 3 L 4 s 4) s max M F [N] α /20.5 5) xM5 ca.60 ca /22 5) xM5 ca.100 ca /24.5 5) xM5 ca.170 ca /26.7 5) xM6 ca.220 ca. 8 1) Min. bore of brake with optional flange; keyway JS9 as per DIN 6885, sheet 1. 2) Min. bore of brake without optional flange; keyway JS9 as per DIN 6885, sheet 1. 3) bore with keyway JS9 as per DIN 6885, sheet 1. 4) air gap up to brake adjustment or friction disc replacement. 5) Hub length of brake with optional flange. Supporting keyway over entire length. Shaft ISO fitting k6. ( 1), 2), 3) ) Accessories Size Friction plate Flange (only with friction plate) Hand release feature Mounting screws Screw Rated torque Material number Screws per brake A A A01940 ISO M5 x Nm A A A01940 ISO M5 x Nm A A A01940 ISO M5 x ) 6 Nm A A A01940 ISO M6 x Nm ) If the brake is fitted to the aluminium end shield or if an optional flange is used, screws as per ISO 4762-M5x will be required. 7

8 AC Line Spring-applied single-disc brake Three-phase AC Version E00 closed version with connection cable E00 closed version with connection box Standard rated voltage Protection Thermal class Rated torque Accessories (options) Note 400 V AC 3~, 50 Hz IP 65 (when installed under motor fan hood) F Nm hand release feature, mounting screws Specification subject to change without notice. The General technical information and the Operating instructions E00 or E00 must be strictly observed. Technical specifications Size Transmissible torque M 4 [Nm] reachable rated torque with fully screwed in adjustment ring M 2 max [Nm] speed n max [min -1 ] switching P max [kj/h] switching energy (Z = 1) W max [kj] Rated P s [VA] Coupling time (acc. to VDE 0580) t 1 Response times Disconnection time t 2 Moment of inertia armature and flange hub J [kgcm 2 ] Weight m [kg]

9 Dimensions [mm] release force F type E00 with connection cable air gap type E00 cable 4x0.75mm 2 Size d d 1 d 2 d 3 d 4 (H7) d 5 d 6 d 7 (H9) d 8 d 9 d 10 d 11 b b 1 b 2 b 3 b ) / 22 2) ) / 22 2) ) / 38 2) ) / 45 2) Size b 5 h h 1 h 2 R L L 1 L 2 s 3) s max M F [N] 4) α ß xM5 20 ca. 26 3x xM5 40 ca. 26 3x xM5 80 ca. 26 6x xM6 100 ca. 26 6x60 1) Min. bore with keyway JS9 as per DIN 6885, sheet 1 2) bore with keyway JS9 as per DIN 6885, sheet 1; supporting keyway entire length. Shaft ISO fitting k6 ( 1), 2) ) 3) air gap referred to max. rated torque (standard) 4) Release force F (approx.) referred to max. rated torque (standard) Accessories Size Hand release feature Mounting screws Screw Rated torque Material number Screws per brake A00940 ISO M5 x Nm A00940 ISO M5 x Nm A00940 ISO M5 x Nm A00940 ISO M6 x Nm

10 Kendrion (Villingen) GmbH Wilhelm-Binder-Strasse Villingen-Schwenningen Germany Tel: Fax: KENDRION