Motors (Mobile & Industrial)
|
|
|
- Stewart Dawson
- 6 years ago
- Views:
Transcription
1 Motors (Mobile & Industrial) Calzoni MR-MRE Low Speed High Torque Small Radial Piston Motors The outstanding performance of this robust product is the result of our original, patented design. Used widely in the injection molding, mining, off shore drilling, oil field, and marine markets, the Parker Calzoni motor is produced in sizes from 32cc up to 23034cc per revolution. The efficiency ofour design allows for a smaller installed product for the same displacement vs. our competitors. Since there are no internal connecting rods, we have greatly reduced frictional drag as well as most thrust loading. By creating a static balance on the shaft we have extended the expected lifetime as well. MRT-MRTE-MRTF Low Speed High Torque Large Radial Piston Motors Performance Data MRD-MRDE, MRV-MRVE Low Speed High Torque Variable Radial Piston Motors Series Max. Pressure PSI (BAR) Max. Speed RPM Torque MR ( ) 4350 (300) MRE ( ) 3600 (250) MRT ( ) 4350 (300) MRTE/MRTF ( ) 3600 (250) Series Max. Pressure PSI (BAR) Max. Speed RPM Min. Torque Max. Torque MRD/MRV ( ) 4350 (300) MRDE/MRVE ( ) 3600 (250)
2 Performance Data Series Max. Pressure PSi (BAR) Motors (Mobile & Industrial) MR-MRE Low Speed High Torque Small Radial Piston Motors Max. Speed RPM Torque MR (32.1) 4350 (300) MR (56.4) 4350 (300) MR (72.6) 4350 (300) MR (92.6) 4350 (300) MR (109.0) 4350 (300) MR (124.7) 4350 (300) MR (159.7) 4350 (300) MR (191.6) 4350 (300) MR (199.2) 4350 (300) MR (250.9) 4350 (300) MR (304.4) 4350 (300) MR (349.5) 4350 (300) MR (451.6) 4350 (300) MR (607.9) 4350 (300) MR (706.9) 4350 (300) MR (1125.8) 4350 (300) MR (1598.4) 4350 (300) MR (1809.6) 4350 (300) MR (2293.1) 4350 (300) MR (2792.0) 4350 (300) MR (3636.8) 4350 (300) MR (4502.7) 4350 (300) MR (6460.5) 4350 (300) MR (6967.2) 4350 (300) MRE ( (250) MRE (497.9) 3600 (250) MRE (804.2) 3600 (250) MRE (1369.5) 3600 (250) MRE (2091.2) 3600 (250) MRE (3103.7) 3600 (250) MRE (5401.2) 3600 (250) MRE (8226.4) 3600 (250)
3 Motors (Mobile & Industrial) MR-MRE Low Speed High Torque Small Radial Piston Motors Benefits/Features 5-piston design Wide range of displacements Starting torque from 90-95% theoretical Total efficiency up to 96% Resistance to thermal shocks ΔT = 176 F Speed feedback accessories optional Dimensions, inch (mm) Series A C Max. D MR33 MR (196.1) 2.25 (57.2) 9.27 (235.5) MR73 MR93 MR110 MR125 MR160 MR190 MR200 MR250 MR300 MRE330 MR350 MR450 MRE500 MR600 MR700 MRE800 MR1100 MRE1400 MR1600 MR1800 MRE2100 MR2400 MR2800 MRE3100 MR3600 MR4500 MRE5400 MR6500 MR7000 MRE (228.6) 2.70 (68.6) 9.84 (249.9) 9.53 (242.1) 2.64 (67.1) (313.2) 9.53 (242.1) 3.19 (81.0) (327.9) (178.9) 3.82 (97.0) (368.0) (299.0) 3.98 (101.1) (405.1) (341.1) 4.61 (117.1) 18.5 (469.9) (373.9) 5.20 (132.1) (558.0) (466.1) 6.02 (152.9) (642.1) (489.5) 8.27 (210.1) (766.1) (565.9) 9.06 (230.1) (864.1) A C D 133
4 Motors MR/MRE Model Ordering Size & Speed Sensor Option Connection Flange Special (Entered by Factory) MR MRE Standard 3626 PSI (250.0 BAR) Max. Continuous Expanded 3026 PSI (208.6 BAR) Max. Continuous in 3 (cm 3 ) Size & MR MRE 33A 1.96 (32.1) x 57A 3.44 (56.4) x 73B 4.43 (72.6) x 93B 5.65 (92.6) x 110B 6.65 (109.0) x 125C 7.61 (124.7) x 160C 9.75 (159.8) x 190C (191.6) x 200D (199.3) x 250D (250.9) x 300D (304.5) x 330D (332.3) x 350E (349.5) x 450E (451.6) x 500E (497.8) x 600F (608.0) x 700F (706.1) x 800F (804.3) x 1100G 68.7 (1126) x 1400G 83.6 (1370) x 1600H 97.5 (1598) x 1800H (1809) x 2100H (2091) x 2400I (2292) x 2800I (2792) x 2100I (3104) x 3600L (3636) x 4500L (4503) x 5400L (5401) x 6500M (6460) x 7000M (6697) x 8200M (8226) x Spline Ex DIN 5463 D1 Spline DIN 5480 F1 Female Spline DIN 5480 P1 Q1 C1 T1 M1 F1 V1 U1 C1 S1 T1 G1 L1 N S with Key B1 Spline B.S None Encoder Drive Mechanized Tachometer Drive Tachometer Drive NBR Mineral Oil None Standard DENISON Calzoni Standard SAE Metric Standard SAE UNC Standard (CW: Inlet in A; CCW: Inlet in B) Reversed (CW: Inlet in B; CCW: Inlet in A) NBR, 218 PSI (15.0 BAR) Seal Fluorocarbon No Seal (for Brake) Speed Sensor Option Incremental Elcis Encoder, Uni-directional* B1 Incremental Elcis Encoder, Bi-directional* * 500 pulse/rev Connection Flange SAE 6000 PSI (413.7 BAR) Metric SAE 6000 PSI (413.7 BAR) UNC 134
5 Motors (Mobile & Industrial) MRT-MRTE-MRTF Low Speed High Torque Large Radial Piston Motors Performance Data Series Max. Pressure PSI (BAR) Max. Speed RPM Torque MRT (7100.4) 4350 (300) MRTF (7808.4) 3600 (250) MRTE (8517.3) 3600 (250) MRT (9005.4) 4350 (300) MRTF (9903.9) 3600 (250) MRTE ( ) 3600 (250) MRT (14010) 4350 (300) MRTF ( (250) MRTE (16542) 3600 (250) MRT (16759) 4350 (300) MRTF (18025) 3600 (250) MRT (19508) 4350 (300) MRTE (19788) 3600 (250) MRTF (21271) 3600 (250) MRTE (23034) 3600 (250) Piston Design Benefits/Features Hydraulically balanced 10 and 14-piston twin row design Wide range of displacements Starting torque from 91% theoretical Total efficiency up to 96% Speed feedback accessories optional 14-Piston Design 135
6 Motors (Mobile & Industrial) MRT-MRTE-MRTF Low Speed High Torque Large Radial Piston Motors Dimensions, inch (mm) MRT7100 MRT9000 MRT1400 MRT17000 MRT19500 Series A C Max. D MRTE8500 MRTE10800 MRTE16500 MRTE20000 MRTE23000 MRTF7800 MRTF9900 MRTF1550 MRTF18000 MRTF (688.5) (1135.5) (50.0) 3.15 (80.0) (766.0) (1014.0) 136
7 Motors MRT-MRTE-MRTF Model Ordering Size & Speed Sensor Option Connection Flange Special (Entered by Factory) MRT MRTE MRTF Standard 3626 PSI (250.0 BAR) Max. Continuous Expanded 3026 PSI (208.6 BAR) Max. Continuous in 3 (cm 3 ) Size & MRT MRTE MRTF 7100P (7103) x 7800P (7808) x 8500P (8518) x 9000P (9005) x 9800P (9904) x 10800P (10802) x 14000Q (14009) x 15500Q (15278) x 16500Q (16543) x 17000Q (16759) x 18000Q (18026) x 19500Q (19509) x 20000Q (19787) x 21500Q (21270) x 23000Q (23034) x D1 Spline DIN 5480 F1 Female Spline DIN 5480 Q1 C1 T1 M1 F1 V1 U1 S1 G1 M1 N S None Encoder Drive Mechanized Tachometer Drive Tachometer Drive NBR Mineral Oil Standard SAE Metric Standard (CW: Inlet in A; CCW: Inlet in B) Reversed (CW: Inlet in B; CCW: Inlet in A) NBR, 218 PSI (15.0 BAR) Seal Fluorocarbon No Seal (for Brake) Speed Sensor Option Incremental Elcis Encoder, Uni-directional* B1 Incremental Elcis Encoder, Bi-directional* * 500 pulse/rev Connection Flange SAE 6000 PSI (413.7 BAR) Metric SAE 6000 PSI (413.7 BAR) Metric Special Timing 137
8 Performance Data Series Motors (Mobile & Industrial) MRD-MRDE, MRV-MRVE Low Speed High Torque Variable Radial Piston Motors Max. Pressure PSI (BAR) Max. Speed RPM Min-Max Torque MRD (304.1) 4350 (300) MRD (451.6) 4350 (300) MRV (451.6) 4350 (300) MRD700 MRV (706.9) 4350 (300) MRD1100 MRV (1125.8) 4350 (300) MRD1800 MRV (1809.6) 4350 (300) MRD2800 MRV (2792.0) 4350 (300) MRD4500 MRV (4502.7) 4350 (300) MRDE (332.4) 3600 (250) MRDE (497.9) 3600 (250) MRDE800 MRVE (804.2) 3600 (250) MRDE1400 MRVE (1369.5) 3600 (250) MRDE2100 MRVE (2091.2) 3600 (250) MRDE3100 MRVE (3103.7) 3600 (250) MRDE5400 MRVE (5401.2) 3600 (250) MRV450 Benefits/Features 5-piston design ratios of 1:2 or 1:3 Starting torque from 90-95% theoretical Total efficiency up to 96% Resistance to thermal shocks ΔT = 176 F Speed feedback accessories optional 138
9 Motors (Mobile & Industrial) MRD-MRDE, MRV-MRVE Low Speed High Torque Variable Radial Piston Motors Dimensions, inch (mm) Series A C Max. D MRD300 MRDE330 MRD450 MRDE500 * MRD and MRV (281.9) 3.19 (81.0) (327.9) (328.9) 3.82 (97.0) (368.0) MRV (407.9) 4.33 (110.0) (368.0) MR*700 MR*E800 MR*1100 MR*E1400 MR*1800 MR*E2100 MR*2800 MR*E3100 MR*4500 MR*E (349.0) 3.98 (101.1) (404.9) (401.1) 4.61 (117.1) (469.9) (434.1) 5.20 (132.1) (558.0) (526.0) 6.02 (152.9) (642.1) (526.0) 8.27 (210.1) (766.1) 139
10 Motors MRD-MRDE, MRV-MRVE Model Ordering Size & Speed Sensor Option Connection Flange Special (Entered by Factory) MRD MRDE MRV MRVE Dual, Standard 3626 PSI (250.0 BAR) Max. Continuous Dual, Expanded 3026 PSI (208.6 BAR) Max. Continuous Variable, Standard 3626 PSI (250.0 BAR) Max. Continuous Variable, Expanded 3026 PSI (208.6 BAR) Max. Continuous Speed Sensor Option None Q1 Encoder Drive C1 Mechanized Tachometer Drive T1 Tachometer Drive M1 Incremental Elcis Encoder, Uni-directional* B1 Incremental Elcis Encoder, Bi-directional* *500 pulse/rev 300 D D E E E F F G G H H I I L L M M / 9.28 (304.1 / 152.1) / (332.4 / 166.2) / 8.12 (451.6 / 133) / (451.6 / 225.8) / (497.9 / 248.9) / (706.9 / 235.6) / (804.2 / 268.1) / ( / 375.3) / ( / 456.5) / ( / 603.2) / ( / 697.1) / ( / 930.7) / ( / ) / ( / ) / ( / ) / (6967 / ) / (8226 / ) Size & MRD MRDE MRV MRVE x x x x x x x x x x x x x x x x x F1 V1 U1 C1 S1 T1 G1 L1 N S NBR Mineral Oil Standard Denison Calzoni Standard SAE Metric Standard SAE UNC Standard (CW: Inlet in A; CCW: Inlet in B) Reversed (CW: Inlet in B; CCW: Inlet in A) NBR, 218 PSI (15.0 BAR) Seal Fluorocarbon No Seal (for Brake) Connection Flange None SAE 6000 PSI (413.7 BAR) Metric SAE 6000 PSI (413.7 BAR) UNC Spline Ex DIN 5463 D1 Spline DIN 5480 F1 Female Spline DIN 5480 P1 with Key B1 Spline B.S
13. Radial Piston Motors
Denison Calzoni - LSHT radial piston motors 13. Radial Piston Motors Fixed Displacement... Page 13-2 Maximum Pressure Cont. / Interm. () Displacement Range (in 3 /rev) Remarks Pages MR 3600 / 4400 2.0-426.8
High Torque Low Speed Motors MRT - MRTE - MRTF
High Torque Low Speed Motors MRT - MRTE - MRTF Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
High Torque Low Speed Motors MR - MRE
High Torque Low Speed Motors MR - MRE Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
Low Speed High Torque Motors
Low Speed High Torque Motors Catalogue HY29-0503/UK TABLE OF CONTENTS Table of contents Features General information Functional description Technical data 3 4 4 5 6 FRAME SIZE P Operating diagrams Overall
Hydraulic Pump Division. Product Range - HY /HPD/US. aerospace climate control electromechanical filtration fluid & gas handling
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Hydraulic Pump Division Product Range - HY28-2673-01/HPD/US WRNING
RA / Radial Piston Motor Model MR, MRE Fixed Displacement. Table of Contents. Replaces: RA /10.95
Radial Piston Motor Model MR, MRE Fixed Displacement Sizes 160 to 9500 6100 PSI (up to 420 bar) 582 in 3 (up to 9542 cm 3 ) 25,075 lb-ft (up to 34000 Nm) RA 15 228/10.95 Replaces: 12.94 Wide range of displacements
1. Axial Piston Pumps
Axial Piston Pumps 1. Axial Piston Pumps Series Model Maximum Operating Pressure Maximum Displacement Remarks Page PSI In 3 /rev PV & PVM & PVR Premier Worldcup Goldcup PV6 4500 0.88 PV10 4500 1.26 PV15
P2060 P2075 P2105 P2145 P3105 P3145
Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series
Variable Displacement Piston Pumps Series P2/P3. General Information. P3 Series
General Information General Information P2 Series The newly developed variable displacement piston pumps from Parker Hannifin, designated P2, are intended for mobile applications, featuring a very compact
HPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
CONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
HYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264
TPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Torque. Motor model R
MA series motors CHARACTERISTICS OF THE MA SERIES MOTORS (SAE Motor model Displacement Continuous max. speed (1 Intermittent max. speed (1 Max. flow absorbed Torque Torque at 350 bar (5100 psi Theoretical
Veljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
RADIAL PISTON MOTORS TECHNICAL DATA HRS2. Max. cont. speed. Specific torque. Recommended flushing flow. Displacement. Min. speed.
A/200/ MAX. 195 3,1 750 3 250 275 350 36 45 89,5 84,5 8 26 A/200/69 MIN. 69 1,1 850 5 250 275 350 24 30 85,5 78 8 26 A/200/75 MIN. 75 1,2 800 5 250 275 350 26 32,5 87 81 8 26 A/200/95 MIN. 95 1,5 775 4
Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
Gear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
![Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]](/thumbs/76/74105930.jpg "Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]")
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
Oildyne. Miniature Piston Pumps 5 Piston Design. Pressures to 276 bar (4000 psi) Displacements from.156cc/rev to.865cc/rev (.01 to.
Oildyne 5 Piston Design Pressures to 276 bar ( psi) Displacements from.156cc/rev to.865cc/rev (.1 to.5 in 3 /rev) 29 Features Pumping Efficiencies to 9% Allow You to Effectively Use.156 to.865 cc Flow
Brochure Hydraulic Pumps, Hydraulic Parts
www.hidrocel.com.tr 2013 Brochure Hydraulic s, Hydraulic Parts Product Group Bent Axis s Piston s PBA s 2PBA s PBX s Gear s PA s PH s Power Take Off HDP s PTO Adapter, Valve, Cardan Shaft www.hidrocel.com.tr
MOTORS M HYDRAULIC MOTORS
MOTORS M HYDRAULIC MOTORS T E C H N I C A L C A T A L O G Fixed displaced axial piston motors POCLAIN HYDRAULICS Displacement cm³/rev [in³/rev.] M0 M1 M2 M3 From 7,07 [0.43] to 17,84 [1.09] From 9,08 [0.55]
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically
TMF 600 ( cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Radial piston motor for integrated drives MCR-H
Radial piston motor for integrated drives MCR-H RE 15199 Edition: 03.2017 Replaces: 12.2013 Frame size MCR3, MCR5, MCR10, MCR15, MCR20 Displacement 160 cc to 3000 cc Differential pressure up to 450 bar
Veljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
Technical Information Series 45 G Frame powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Technical Information Series 45 G Frame powersolutions.danfoss.com Contents Frame G Design... 4 Specifications... 5 Performance G74B... 6 Performance G9C... 7 Order code...
Eaton Char-Lynn Low Speed, High Torque Motors. Orbit motor
Eaton Char-Lynn Low Speed, High Torque Motors Orbit motor Table of Contents Description Page No. H & S Series 3 Features 3 Model code 3 H Series 4-9 Specifications 4 Performance 5 Dimensions and mount
AXIAL PISTON PUMPS VARIABLE DISPLACEMENT
FEATURES The Series is a family of variable displacement axial piston pumps for use in closed circuits. The displacement is continuously variable by means of a tilting swash plate and the oil flow direction
Mobile. Hydraulics Innovative Products and System Solutions
Mobile Hydraulics Innovative Products and System Solutions Contents xx 99 Introduction Parker Hannifin Corporation...3 Mobile Systems Team...4 Product Solutions...6 Value Added Programs...8 Technology
COMPACT. Series CA 50 - CA 210
COMPACT Series CA 50 CA 210 Hägglunds Drives AB Hägglunds Drives AB is the worldwide market leader in design, manufacture and supply of heavyduty hydraulic motors and complete drive systems. Our head office
Ordering Code of 2PBA Pumps
Ordering Code of 2PBA Pumps Pump Code 3 Displacement ( cm ) Direction of Version Sealing Inlet Fittings 2PBA 18 L S N A A Suction Fittings Included N Nitrile V Viton S Special Version C Classic Version
Mobile Hydraulics. Innovative Products and System Solutions
Mobile Hydraulics Innovative Products and System Solutions Contents Introduction Parker Hannifin Corporation... 3 Mobile Systems Team... 4 Product Solutions... 6 Value Added Programs... 8 Technology Centres...
High Speed Hydraulic Motors. Catalog HY /NA zm16 zm17
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA zm16 zm17 223 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed
Vane motor high performance hydraulic series M5B - M5BS - M5BF
Vane motor high performance hydraulic series M5B - M5BS - M5BF Publ. 2 - AM172 - B 1 / 25 / FB Replaces : 2 - AM172 - A L11-2172 - 2 CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12 vanes and a patented
T Series with Parking Brake (185-)
T Series with Parking Highlights Description Eaton s latest offering in LSHT motor technology is the new T Series Motor with Parking Brake. T Series Motor with Parking Brake utilizes brake pads that rotate
Char-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry
Keystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
DA/SR. Pneumatic Rotary Actuators FEATURES VALBIA ISO 9001 CERTIFIED
VALBIA ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
B e n t a x i s hydraulic motors. MSeries
B e n t a x i s hydraulic motors MSeries Contents Definition and main applications of hydraulic motors, advantages of HYDRO LEDUC motors.............. 1 Operating conditions of motors... 2 Determining
Displacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
![Displacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor](/thumbs/78/77251657.jpg "Displacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor")
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
High Speed Hydraulic Motors
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA C C225 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed range
B e n t a x i s hydraulic motors. MSeries
B e n t a x i s hydraulic motors MSeries Contents Definition and main applications of hydraulic motors, advantages of HYDRO LEDUC motors.............. 1 Operating conditions of motors... 2 Determining
Series P2/P3 Variable Volume Piston Pumps
Variable Volume Piston Pumps A Bulletin HY13-2656-B1/US A3 Introduction General information The newly developed variable displacement piston pumps from Parker Hannifin, designated P2 and P3, are mainly
Radial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 02.2017 Replaces: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm
J Series (129-) Highlights
Highlights Features: Constant clearance Geroler set Integrated check valves Thrust Bearing Bushing Port B Port A Self-lubricating shaft bushing High-strength rigid components Increased valve seal lands
Piston Pumps Series P2 / P3 Variable Displacement
Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options
KEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
OMP Hydraulic Motor Versions
Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X
HYDRAULIC-MOTORS. Radial Piston Motors with fixed displacement RM...X series V g = 250 cm 3 /rev cm 3 /rev
s with fixed displacement RM...X series V g = 250 cm 3 /rev - 900 cm 3 /rev HYDRAULIC-MOTORS Catalogue No. HM1-015E RM 250X - RM 900X Page 2 Features: many displacements for all applications very high
Genuine Metaris MA10VO/VSO Technical Catalog. Variable Displacement Piston Pump - A10V Series 31 & 52
Genuine Metaris MA10VO/VSO Technical Catalog www.metaris.com Contents General Series MA10VO/VSO Series 31 4 Page Features 4 Technical Data 5 Performance Information 6 Model Code Breakdown 9 Fluid Info
TKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
PSI Series Features: Trouble-free design for long life. Simple mechanical actuation
CROSSOVER DRIVES Wrap Spring Clutches Ideal for Overrunning, Start- Stop, and Single Revolution Applications The Crossover Drives clutches are the basic form of wrap spring clutch design. For start-stop
World Pressure Filters A new standard in 7,000 psi pressure filters
World Pressure Filters A new standard in 7, psi pressure filters Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
Radial piston motors for industrial applications MCR-D
Radial piston motors for industrial applications MCR-D MCR-E RE 15196 Edition: 02.2017 Replaces: 12.2013 MCR-D Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450
Radial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125
Double Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
BENT AXIS HYDRAULIC MOTORS
BENT AXIS HYDRAULIC MOTORS FIXED DISLACEMENT make it simple 2 Contents Applications and efficiency........................ Definition and advantages......................... Operating conditions..............................
Spool Valve Hydraulic Motors Series J
Spool Valve Hydraulic Motors Series J 10.201 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.201 EN EATON_Motoren J Series english J Series Highlights Thrust Bearing Bushing Port B Port
HYDRAULIC MOTORS EPMT
HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS
Hydraulic Motor/Pump Series F11/F12 zp12
Hydraulic Motor/Pump zp12 Fixed Displacement zp11 Catalogue HY17-8249/US March 2004 Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264 US gallon 1 cm
IAC. Dual displacement hydraulic motors
IAC Dual displacement hydraulic motors The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristics in legal sense. Italgroup
World Pressure Filters. A New Standard in 7,000 psi Pressure Filters
World Pressure Filters A New Standard in 7, psi Pressure Filters 12 WPF Series Applications Together we can the environment. Preserve Minimize waste and promote energy efficiency. worldwide Achieve filtration
MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM
MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM Muncie Power Products OPTIMUM Series gear pumps/motors offer premier performance for a wide variety of applications across several industries.
» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
Radial piston motor for frame integrated drives MCR-A
Radial piston motor for frame integrated drives MCR-A RE 15195 Edition: 12.2013 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
AXIAL PISTON MOTORS SHMF
SECTIONAL VIEW Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output shaft Valve block Shuttle valve Swashplate 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 AXIAL PISTON PUMPS SHPV SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid
Series 45 Axial Piston Open Circuit Pumps Technical Information Frame F
Design cross section LS contro l (attached to endcap) LS spoo l LS adjustmen t PC spoo l PC adjustmen t Servo piston Bias sprin g Piston Slipper Tapered roller bearing Valve plate Shaft seal Cylinder block
INTERMOT DUAL DISPLACEMENT MOTORS
INTERMOT DUAL DISPLACEMENT MOT IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATION Pag. 2 ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS INSTRUCTIONS AND ADVICES 3 4 7
Hydraulic Pumps T7 for variable speed drives
FC Hydraulic Pumps T7 for variable speed drives Denison Vane Technology Catalogue HY29-11/UK Content General Information Introduction and product key features 3 Main Technical Data Main table for single
Pneumatic Rotary Actuators
ALEDER ISO 9001 CERTIFIED FEATURES Twin Rack and Pinion Design Constant Torque Output Compact Design Balanced Internal Forces Robust Design For Long Life Extruded Aluminum Body Hard Coat Anodized Smooth
Variable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
HYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS
HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...
IAC SERIES TECHNICAL CATALOGUE INDEX 8 DRAIN RECOMMENDATIONS 12 SHAFT SEAL FEATURES 13 FORMULAS CONVERSIONS 14
INTERMOT Italgroup DUAL dual DISPLACEMENT displacement MOTORS motors IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATION Pag. 2 ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS
Series 90 Axial Piston Motors. Technical Information
Series 90 Axial Piston Motors Technical Information HISTORY OF REVISIONS Table of Revisions Date Page Changed Rev. Fourth edition 2 520L0604 Contents GENERAL DESCRIPTION Cross section Cross section Cross
MOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
Gear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs
Gear Pumps Series PGP Fixed Displacement Pumps, Cast-Iron Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Table
OMEW Hydraulic Motor Versions
Versions VERSIONS Mounting flange Wheel Shaft Port size European version US version Clockwise shaft rotation (CW version) 1) Counter clockwise shaft rotation (CCW version) 1) Tapered 35 mm G 1 /2 X X X
World Pressure Filters A New Standard in 7,000 psi Pressure Filters
World Pressure Filters A New Standard in 7, psi Pressure Filters 12 Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions.
INTERMOT DUAL DISPLACEMENT MOTORS
INTERMOT DUAL DISPLACEMENT MOTORS IAC SERIES TECHNICAL CATALOGUE INDEX GENERAL INFORMATION Pag. 2 ORDERING INSTRUCTIONS MOTOR TECHNICAL DATA HYDRAULIC FLUIDS RECOMMENDATIONS INSTRUCTIONS AND ADVICES 3
Gear Pump Division. Coding
Gear Pump Division Coding October 28, 2014 Commercial Roller Bearing Gear Pumps Major Components PGP050B278BYOL20-98DAF12-1 1 3 1 2 3 4 5 6 7 2 5 6 1) Shaft End Cover 2) Port End Cover 3) Gear Housing
Spool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.
Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool
GM SERIES TECHNICAL CATALOG. Crankshaft Design Radial Piston Hydraulic Motors
www.saihyd.com info@saihyd.com Crankshaft Design Radial Piston Hydraulic Motors GM SERIES TECHNICAL CATALOG CONTENTS PAGE Motor Displacement Table 2 Motor Characteristics & Technical Data 3 GM05 Series
TKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
NB: Models, codes and specifications may be subject to change without notice. SECTION C PISTON PUMPS & MOTORS PAGE DESCRIPTION
NB: Models, codes and specifications may be subject to change without notice. SECTION C PISTON PUMPS & MOTORS PAGE DESCRIPTION PAGE CASAPPA PISTON PUMPS - PLATA SERIES PLATA LVP30...C 2 PLATA LVP48...C
Radial piston motor for track drives MCR-T
Radial piston motor for track drives MCR-T RE 15221 Edition: 03.2017 Replaces 07.2015 Frame size MCR5, MCR6, MCR10 Displacement 620cc to 1340cc Differential pressure up to 400 bar Torque output up to 8530
Hydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
VIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
Bent Axis Piston Motor, Fixed, Bi-directional Series: MFBP...1
Features 40 bent axis piston motor for high power and small overall dimensions Bi-directional rotation Rotation speed up to 8800 rpm Torque up to 840 Nm ( 619 ft-lbs) Side or rear port locations available
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG Hybel Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS Contents CONTENTS About us.... 04 Products Line.... 06 Configure your product.... 08 Aluminibeta
IAC. Dual displacement hydraulic motors
IAC Dual displacement hydraulic motors All partial or total reproduction and copy without written authorization of Italgroup S.r.l. is strictly forbidden. 5 ITALGROUP S.R.L. - ALL RIGHTS RESERVED ITALGROUP
Series TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MH APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MP APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS