SUCTION LINE ACCUMULATOR IMAGES, DRAWINGS
|
|
|
- Nelson Simon
- 6 years ago
- Views:
Transcription
1 SUCTION LINE ACCUMULATOR IMAGES, DRAWINGS Mounting Stud Mounting Flange Accumulator with Heat Exchanger 19 23
2 SUCTION LINE ACCUMULATOR MODEL AVAILABLE & SELECTION RECOMMANDATION SR NO SERIES - Ø 3" APPROX MAX. TON. R-410A DIMENSIONS REFER AT + 40 F SIZE MOUNTING DRG. (inch) EVAPORATING ØA B C D E OPTIONS NO. TEMP mm inch mm inch mm inch mm inch mm inch 1 ACC S /8" ODF MOUNTING FLANGE 1 2 ACC S /2" ODF ACC S /8" ODF NA NA M8 X 1.25PITCH 2 NA 4 5 MODEL HOLDING CAPACITY at +40 F R-410A LIQUID LBS KG ( ( ACC S /4" ODF ACC S /2" ODF /4" NPT connection SERIES - Ø 4" 6 ACC S 2.1 5/8" ODF ACC S /2" ODF NA SERIES - Ø 5" 8 ACC S /8" ODF ACC S /4" ODF ACCM S /8" ODF MOUNTING FLANGE 3 11 ACC S /8" ODF 12 ACCM S 7/8" ODF MOUNTING FLANGE 3 13 ACC S ACCM S 1-1/8" ODF MOUNTING FLANGE 3 NA 15 ACC S ACCM S MOUNTING FLANGE 3 17 ACC S /8" ODF ACCM S MOUNTING FLANGE 3 SERIES - Ø 6" 19 ACC S /8" ODF 20 ACCM S MOUNTING FLANG ACC S /8" ODF 22 ACCM S MOUNTING FLANG 3 23 ACC S 4.2 7/8" ODF 24 ACCM S MOUNTING FLANG ACC S NA "- 1/8 ODF 26 ACCM S MOUNTING FLANG ACC S 1-3/8" ODF ACCM S 1-3/8" ODF MOUNTING FLANG 3 29 ACC S 1"-5/8 ODF ACCM S 1"-5/8 ODF MOUNTING FLANG 3 SERIES - ACCHX (HEAT EXCHANGER ACCUMLATOR) 1 ACCHX S /8" ODF D&D1 D&D MOUNTING FLANG 4 AVAILABLE ) MOUNTING FLANGE SHOWN AS M IN MODEL NUMBER, WITH 4 HOLES OF Ø7MM AVAILABLE ON CUSTOMER REQUEST AS SHOWN IN DRAWING - 3 2) FOR HOLDING CAPACITY OF R-134A, MULTIPLY R-410A CAPACITY BY 1.11 FOR R-22, MULTIPLY R-410A CAPACITY BY 1.09 & FOR R-404A, MULTIPLY R-410A CAPACITY BY ) THE REFRIGERANT HOLDING CAPACITY OF DRY ALL ACCUMULATOR IS BASED ON AVERAGE CONDITION OF MORE THAN 50% FILL UNDER RUNNING CONDITION 4) WHEN SELECTING OR SIZING AN ACCUMULATOR S MAY NOT NECESSARILY MATCH THE SUCTION LINE SIZE 5) MAXIMUM WORKING PRESSURE - 25BAR (355PSIG) APPROX.. 6) FUSIBLE PLUG AVAILABLE ON SPECIFIC MODELS Connection Size (1-1/8 ) Diameter in inch ACCM/HX S Heat Exchanger Mounting Flange Accumulator 24
3 LIQUID REFRIGERANT RECEIVER (HORIZONTAL) IMAGE, DRAWING & MODEL AVAILABLE B D C SR.NO MODEL NO. INTERNAL VOLUME (CAPACITY) LITERS PUMP DOWN CAPACITY (Kg) SUGGESTED SIZES ØA INLET OUTLET mm inch mm B inch DIMENSIONS C D E F mm inch mm inch mm inch mm inch MOUNTING OPTIONS REFER 1/4" NPT DRAWING NO. SERIES 1 (SIDE INLET & OUTLET) 1 LRRH S LRRH S /8" ODF 3 LRRH S LRRH S " LRRH S UNS LRRH S /2" ODF LRRH S LRRH S LRRH S LRRH S /8" ODF 1-1/ LRRH S UNF LRRH S MOUNTING BRACKET WITH Ø15mm HOLES X 4nos. H1 CR RECEIVER WITH NPT ARE ALSO PROVIDED AS PER CUSTOMER REQUIREMENT Connection Size (3/8 ) Diameter in inch LRRH S Liquid Refrigerant Receiver Horizontal 25
4 LIQUID REFRIGERANT RECEIVER (VERTICAL) IMAGES, DRAWINGS & MODELS AVAILABLE SERIES 1 (SHELL INLET & SIDE OUTLET) "-14 UNS 1-1/4-12 UNF Connection Size (3/8 ) Diameter in inch LRRV S Liquid Refrigerant Receiver Vertical 26
5 LIQUID REFRIGERANT RECEIVER (DEEP DRAW TYPE) IMAGE, DRAWINGS & MODELS AVAILABLE 1/4 NPT 90 C B A DRAWING-3 OUTLET\ROTOLOCK VALVE LRRVD S LRRVD S LRRVD S LRRVD S LRRVD S LRRVD S 1-14 UNS \ 3/8 ODF 1-14 UNS \ 1/2 ODF 1-1/4-12 UNF \ 5/8 ODF 1-1/4-12 UNF \ 5/8 ODF 1-1/4-12 UNF \ 5/8 ODF 1-1/4-12 UNF \ 3/4 ODF Connection Size (3/8 ) Diameter in inch (4.7 ) LRRVD S Liquid Refrigerant Receiver Vertical Deep Draw Type 27 23
6 OIL SEPARATOR IMAGE, DRAWING & MODEL AVAILABLE c c c DAHW DRAWING-1 DAAF DRAWING-2 SR.NO MODEL HERMETIC WELDED TYPE SIZE IN & OUT OIL RETURN ØA B DIMENSION mm Inch mm Inch mm Inch mm Inch 1 DAHW S 3/8" ODF 1/4" SAE C D MOUNTING DETAIL OIL CHARGE AMOUNT REFER DRAWING NO 2 DAHW S 1/2" ODF DAHW S 5/8" ODF /8" SAE 4 DAHW S 7/8" ODF NA NA M10 X 1.5 BOLT WITH WASHER & NUT 500 ml 1 5 DAHW S 1-1/8" ODF ACCESSIBLE BOLTED FLANGE TYPE 1 DAAF S 5/8" ODF DAAF S 7/8" ODF 3/8" SAE DAAF S 1-1/8" ODF M10 X 1.5 BOLT WITH WASHER & NUT 500 ml 2 Maximum Capacity of Refrigerant at Evaporator Tempreture. MODEL DAHW S DAHW S DAHW S DAHW S DAHW S DAAF S DAAF S DAAF S R-134a R-22/R-407C R-404A/R-502/R F/-40 C +40 F/4 C -40 F/-40 C +40 F/4 C -40 F/-40 C +40 F/4 C Tons kw Tons kw Tons kw Tons kw Tons kw Tons kw Connection Size (1/2 ) Model No DAHW S Hermatic Welded Dry All Connection Size (5/8 ) Model No DAAF S Accessible Bolted Flange Dry All 28 24
Steel Suction Line Accumulators
Steel Suction Line Accumulators U-Tube Style Accumulators VA, PA and VPA Series The U-tube accumulator design is a result of extensive laboratory testing of various designs. It takes into account essential
R-22 R-404A/R-502/R-507A R-12/
EMERSON CLIMATE TECHNOLOGIES-System Protectors Recommended System Tonnage Take-Apart Liquid Line Filter Driers in Tons* Description, Low Temp. & Commercial Installations Air Conditioning Field Replacement
AXIAL PISTON PUMPS AND MOTORS
HPV-HMF SERIES SECTIONA VIEW AXIA PISTON VARIABE DISPACEMENT PUMP AXIA PISTON FIXED DISPACEMENT MOTOR Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output
Crankcase Pressure Regulating Valves
Crankcase Regulating Valves Crankcase Regulating Valves are designed to prevent overloading of the compressor motor by limiting the crankcase pressure to a predetermined maximum value during and after
Hot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory)
MAKING MODERN LIVING POSSIBLE Data sheet Hot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory) A CPCE hot gas bypass regulator is used to adapt compressor capacity to actual evaporator
Capacity regulators (hot gas bypass) PMC and CVC
MAKING MODERN LIVING POSSIBLE Technical brochure Capacity regulators (hot gas bypass) PMC and CVC The PMC and CVC is used for capacity regulation in refrigeration, freezing and air conditioning plant for
FILTER DRIERS PART NUMBER SIGNIFICANCE LIQUID LINE FILTER DRIERS TOTALINE LIQUID LINE FILTER DRIER PHYSICAL DATA DIMENSIONS
TOTALINE LIQUID LINE FILTER DRIERS P502-8 SERIES P PART NUMBER SIGNIFICANCE P353 FEATURES Compacted bead filter drier Universal Replacement CFC, HCFC, HFC refrigerants Filtration first for more effective
Refrigeration K-211. Replacement Parts. Chillers, Condensers. Compressors, Motors. Electrical. Components. Heating. Indoor Air Quality.
EMERSON CLIMATE TECHNOLOGIES-Oil Controls High Efficiency Centrifugal Oil Separator The High Efficiency Centrifugal Oil Separator is used in ultra-low temperature systems with long refrigerant lines or
NOTE: If the HF body is stamped HFK, then the cage is replaceable. HF N E S C B 2 H C 5 FT 3/8 x 1/2 ODF S/T. Capacity Nominal Rating in Tons
The HF series is a balanced ported valve designed for refrigeration, air conditioning and heat pump applications. Features Stainless steel replaceable power element eliminates corrosion and prevents valve
Thermostatic Expansion
Thermostatic Expansion Valves Thermostatic Expansion Valves TC Series Application TC thermostatic expansion valves are used to adjust the supply of refrigerant in evaporator by controlling the superheat.
Double Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
Thermostatic Expansion
Thermostatic Expansion Valves Thermostatic Expansion Valves TCCE Series Application TCCE thermostatic expansion valve is used to regulate refrigerant flow into the evaporator, especially in applications
Thermostatic Expansion Valve
STANDARD Thermostatic Expansion Valve RFGD series thermostatic expansion valves are used to adjust mass flow of refrigerant into the evaporator while controlling the refrigerant s superheat at the outlet
PH120. Rooftop Packaged. R410a Refrigerant PERFORMANCE DATA OUTDOOR COIL ENTERING TEMPERATURE 0 C
PH120 R410a Refrigerant Rooftop Packaged INDOOR COIL ENTERING AIR TEMP 0 c DB WB 21 23 25 27 29 31 PERFORMANCE DATA OUTDOOR COIL ENTERING TEMPERATURE 0 C 30 35 40 45 Cap Cap Cap Cap 17 115.3 70.7 11.5
Manufactured in the USA in our ISO 9001 registered facility. All accumulators are UL listed (SA4835) and CSA approved (LR41494).
The Virginia KMP suction line accumulator's purpose is to prevent excessive quantities of liquid refrigerant and oil from returning to the compressor. This can result from periods of low demand, low ambient
Solenoid valves type EVR 2 40 NC / NO
Solenoid valves type EVR 2 40 NC / NO Introduction EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with fluorinated refrigerants. Features Complete range of solenoid
HANDBOOK VALVES. Ed VALVES VR-ED 02/ ENG 1
HANDBOOK Ed. 2017 1 CHAPTER 1 WITH SCREW SHUTTER FOR REFRIGERATION PLANTS THAT USE HCFC, HFC OR HFO REFRIGERANTS APPLICATIONS All valves illustrated in this chapter are designed for installation on commercial
Electric expansion valves Types AKVA 10, 15 & 20
Data sheet Electric expansion valves Types AKVA 10, 15 & 20 AKVA are electric expansion valves designed for ammonia refrigerating plant. The AKVA valves are normally controlled by a controller from Danfoss
Solenoid valves. Solenoid valves, type PKVD Solenoid valves, type EVR NC / NO
Solenoid valves Contents Page Solenoid valves, type PKVD 12-20 Introduction... 5 Features... 5 Technical data... 5 Ordering... 5 Capacity... 6 Sizing... 7 Valve selection... 7 Design/Function... 8 Dimensions
Non Cycling Refrigerated Dryer
Model Name D340INA D420INA D510INA D680INA D850INA Rated Flow (cfm) 200 250 300 400 500 Pressure Drop (Psig) 1.60 2.00 2.00 2.90 2.90 Condensate Produced (Gal/Hr) 0.50 0.62 0.74 0.99 1.24 Installed Package
Modulating liquid level regulators, direct-controlled SV 1 and SV 3
MAKING MODERN LIVING POSSIBLE Technical brochure Modulating liquid level regulators, direct-controlled SV 1 and SV 3 The SV 1 and 3 can be used separately as a modulating liquid level regulator in refrigerating,
C U S T O M E R D R I V E N R E S U L T S O R I E N T E D
C O M P O N E N T S F O R T H E R E F R I G E R A T I O N A N D A I R C O N D I T I O N I N G I N D U S T R Y C U S T O M E R D R I V E N R E S U L T S O R I E N T E D C A T A L O G 1 0 9 E D I T I O N
Automatic controls catalogue E.N. 4
TV series Technical parameter Max. body temperature: 80 Max. bulb sensing temperature: 60 About R134a,R22,R407C,R404A/R507 system: Max. working pressure: 3 MPa Max. testing pressure: 3.3 MPa About R410A
Technical brochure Eliminator filter drier DCR - with replaceable solid core
MAKING MODERN LIVING POSSIBLE Technical brochure Eliminator filter drier DCR - with replaceable solid core www.danfoss.com Contents Page Introduction...3 Features...3 Approvals...3 Technical data...4 of
Veljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
WATER-COOLED CONDENSERS
-COOLED CONDENER P701 -COOLED CONDENER (5 to 400 Nominal Tons) Totaline s water-cooled condensers are designed for a wide range of applications and are available in many models ranging from 5 to 400 nominal
Fluid Cooling Brazed Plate BPSW Series
Fluid Cooling Brazed Plate BPSW Series 0916 STAINLESS STEEL CONSTRUCTION Performance Notes Short lead time Stacked plate Stainless steel Copper brazed (nickel option) Oil to water applications High performance
PRODUCT DATA DTG SERIES Unidirectional Filter Driers
The series DTG unidirectional filter-driers are used to protect air conditioning and refrigeration systems from moisture and contamination. FEATURES HIGHLY EFFICIENT IN MOISTURE AND CONTAMINATION REMOVAL
Steel Suction Line Accumulators
"U" Tube Style Accumulators The Parker U tube accumulator design is a result of extensive laboratory testing plus detailed investigation of the various accumulators currently available. It takes into account
CCMT - Electrically operated valves for transcritical and subcritical CO2
MAKING MODERN LIVING POSSIBLE Technical brochure - Electrically operated valves for transcritical and subcritical CO2 The is an electrically operated valve designed specifically for operation in CO 2 systems.
April 2004 / BULLETIN for Supermarket Systems DDR-20 OLDR-15
April 2004 / BULLETIN 90-50 for Supermarket Systems DDR-20 OLDR-15 Page 2 / Bulletin 90-50 SPORLAN DEFROST DIFFERENTIAL PRESSURE REGULATING VALVES OFFER THESE BENEFITS: Able to maintain a differential
Gear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
![Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]](/thumbs/76/74105930.jpg "Gear Housing Widths 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Gear Housing Widths / Flow Rate [ VGP - D Series ]")
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
Veljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
HANDBOOK VALVES. Ed VALVES VR-ED 02/ ENG 1
HANDBOOK Ed. 2017 1 2 INDEX CHAPTER 1 CHAPTER 2 CHAPTER 3 CHAPTER 4 CHAPTER 5 CHAPTER 6 CHAPTER 7 CHAPTER 8 CHAPTER 9 CHAPTER 10 CHAPTER 11 CHAPTER 12 CHAPTER 13 CHAPTER 14 Valves with screw shutter For
Solenoid valves Type EVR 2 40 NC/ NO REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves EVR 2 40 NC/ NO REFRIGERATION AND AIR CONDITIONING Technical leaflet 2 DKRCCPDBB0A202-520H275 Danfoss A/S, 0-2006 Contents Page Introduction.......................................................................................
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
Crankcase pressure regulator Type KVL
Data sheet Crankcase KVL KVL crankcase are used to protect the compressor motor against overload experienced during startup after long off periods or just after defrost periods. They are installed in the
HERMETIC VALVES APPLICATIONS
Valves HERMETIC VALVES APPLICATIONS The hermetic valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive 97/23/EC, Article 1, Section 2.1.4 and
SINGLE VANE PUMPS. BH*, V* and DT6/7 single vane pumps DATA SHEET
SINGLE VANE PUMPS BH*, V* and DT/7 single vane pumps BH* SINGLE VANE PUMPS BH*SINGLE VANE PUMP ORDERING CODE F BHQ 7 D 1 A 1 7 1- F means special seals for fire-resistant fluids. Omit if not required.
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically
Series 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
Pressure and temperature regulators, type PM, and pilot valves
Pressure and temperature regulators, type PM, and pilot valves Introduction Main valves, type PM 1 and PM 3 Pilot valves for mounting directly into main valves, type PM Main valves, type PM 1 and PM 3
InvoTech. Scroll Compressor. Product Manual. It is the outstanding engineering capability that builds the incomparable reliability
InvoTech Scroll Compressor Product Manual It is the outstanding engineering capability that builds the incomparable reliability InvoTech Scroll Technologies Co., Ltd. is a high-tech company. Our company
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
Data sheet. D-2011/05/ Date: 02/2013. Type TSA6 CNG. Inline breakaway Coupling. for bus and truck fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSA6 CNG Inline breakaway Coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description Receptacle insert Eccentric actuator
UHV Flow Cryostat - Helitran
The ARS manufactured LT3B Helitran is a True UHV cold head (10-11 Torr) where all of the rubber o-ring seals have been replaced with welded joints and metal seals. Like all of our LT3 helium flow cryostats,
SeasonPak Packaged Air-Cooled Water Chiller
Installation Manual IM 676 Group: Chiller Part Number: 594920Y Date: July 1996 Supersedes: None SeasonPak Packaged Air-Cooled Water Chiller Models ALR 032E Through 185E 1996 McQuay International Table
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
EMERSON CLIMATE TECHNOLOGIES
STAS STEEL TAKE-APART FILTER DRIER APPLICATION Replaceable core filter-drier for CFC, HCFC and HFC refrigerants for use in large commercial air conditioning and refrigeration systems. FEATURES Unique internal
TAKE-A-PART SHELLS TOTALINE LIQUID & SUCTION LINE REPLACEABLE SHELLS P505-8 SERIES PART NUMBER SIGNIFICANCE
TOTALINE LIQUID & SUCTION LINE REPLACEABLE SHELLS P505-8 SERIES P PART NUMBER SIGNIFICANCE P360 SIZE (in 1/8 ) 505-8 TOTALINE FILTER DRIER SHELLS APPLICATION Totaline Replaceable Core Shells offer the
Torque. Motor model R
MA series motors CHARACTERISTICS OF THE MA SERIES MOTORS (SAE Motor model Displacement Continuous max. speed (1 Intermittent max. speed (1 Max. flow absorbed Torque Torque at 350 bar (5100 psi Theoretical
Crankcase pressure regulator Type KVL
MAKING MODERN LIVING POSSIBLE Data sheet Crankcase pressure regulator KVL Crankcase pressure regulator type KVL is fitted in the suction line ahead of the compressor. KVL protects the compressor motor
GEA Bock HC Compressors. Semi-hermetic Compressors for Hydrocarbons. engineering for a better world. GEA Refrigeration Technologies
GEA Bock HC Compressors Semi-hermetic Compressors for Hydrocarbons engineering for a better world GEA Refrigeration Technologies At a Glance Differences to a standard compressor Electronic motor protection
Solenoid valve for R410A and R744 Types EVR 2 - EVR 6 and EVRH 10 - EVRH 40
Data sheet Solenoid valve for R410A and R744 s EVR 2 - EVR 6 and EVRH 10 - EVRH 40 EVRH high pressure range is a direct or servo operated solenoid valve specially designed to meet the requirements for
SERVICE PARTS LIST for
T-295PL Manual SERVICE PARTS LIST for MODEL GR-60 (N.A.O.) Rooftop Air Conditioning Unit T-295PL REV. 06/202 202 Mobile Climate Control TABLE OF CONTENTS PARAGRAPH NUMBER Page INTRODUCTION... i MODEL CHART...
TI Series - Thermo -Expansion Valves
EMERSON TI series of Thermo -Expansion Valves with interchangeable orifices are designed for refrigeration applications such as display cases in supermarkets, walk-in/reach-in coolers, freezers, soft ice
OMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
FLUID COOLING Shell & Tube EK Series
FLUID COOLING Shell & Tube Series COPPER & STEEL CONSTRUCTION Features Compact Size High Efficiency Finned Bundle Design Low Cost Optional Patented Built-in Surge-Cushion Relief Bypass 3/16 Tube Size Heat
V* THRU DRIVE SINGLE VANE PUMPS ORDERING CODE
V* ORDERING CODE 1 - "F3" means special seals for fire-resistant fluids. Omit if not required 2 - Pump Type: F3 VS 7T C 60 D 86 A A 1 2 3 4 5 6 7 8 9 VS = 12 vane pump, industrial use (very quiet), UNC
Millennium TM. 100 thru 675 Tons (315 thru 2375 kw) renewal parts. Supersedes: RP1 (1099) Form RP1 (710) R-22 and R-134a 00202VIP
Millennium TM Rotary Screw Liquid Chillers renewal parts Supersedes: 160.80-RP1 (1099) Form 160.80-RP1 (710) Model YS BA CB S0 thru YS FA FB S5 (Style E) 100 thru 675 Tons (315 thru 2375 kw) 00202VIP R-22
Expansion valves - 2 of 2
Expansion valves - 2 of 2 Contents Page Thermostatic expansion valves, type T 2 and TE 2 Introduction... 3 Features... 3 Technical data... 3 Superheat... 3 Ordering: Components with flare flare connection...
Thermo -Expansion Valves Series TX7
Technical Bulletin TX7 series of Thermo -Expansion Valves are designed predominantly for AC, heat pumps, close control and industrial process cooling applications. The TX7 is ideal for those applications
OIL FIRED UPFLOW FURNACE SPECIFICATIONS THV1C072A948SA (BECKETT AFG)
MODEL NO. THV1C072A948SA (BECKETT AFG) THV1C072A9V4SA (BECKETT AFG) HEATING CAPACITY High Fire Med Fire Low Fire High Fire Med Fire Low Fire HEAT INPUT RATE (BTUH) 106,250 85,000 70,000 106,250 85,000
Technical leaflet Thermostatic expansion valves with fixed orifice
MAKING MODERN LIVING POSSIBLE Technical leaflet Thermostatic expansion valves with fixed orifice Type TDE / TDEB www.danfoss.com Contents Page Introduction........................................................................................3
V 20 F - 1 P 13 S - 1 A 8H 22 L. Std. cover. 1/2 NPT thd. (V10 only) 3/4 NPT thd. (V20 only) 3/4-16 St. thd. (V10F & V20F) 3/4 16. St. thd.
Model Codes V 2 F - 1 P 13 S - 1 8H 22 L 1 2 3 4 5 6 7 8 9 1 11 12 1 Vane pump 2 Series 1 or 2 3 Integral valve options (Omit if not required) F Flow control & relief P Priority valve & relief 4 Mounting
SUBMITTAL DATA SHEET FEATURES. SPLIT-SYSTEM EVAPORATOR BLOWERS 7.5, 10, 15, 20 & 25 TONS MODELS: J07 thru 25NC, 2-PIPE J10 thru 20ND, 4-PIPE
SUBMITTAL DATA SHEET SPLIT-SYSTEM EVAPORATOR BLOWERS 7.5, 10, 15, 20 & 25 TONS MODELS: J07 thru 25NC, 2-PIPE J10 thru 20ND, 4-PIPE JOB NAME: LOCATION: PURCHASER: ORDER NO: ENGINEER: SUBMITTED TO: FOR:
Hydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
Thermostatic expansion valves Type TGE 10, TGE 20 and TGE 40
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic expansion valves Type TGE 10, TGE 20 and TGE 40 TGE is a dedicated designed series of thermostatic expansion valves for all standard refrigerants including
THERMOSTATIC EXPANSION VALVES
PARKER TXV MODEL NUMBER SELECTION S MODEL E EXTERNAL EQUALIZER OPTIONAL 5 V X CHARGE TYPE 00 M.O.P. B BLEED OPTIONAL 0 BLEED S EG (C) C = Internal Check Valve (E) for externally equalized evaporator pressure
AIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT
AIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT SANHUA Strive for perfection, Pursuit of excellence Sanhua is a leading HVAC&R manufacturer of controls and components with a global
Electric operated valves Type CCM for R744 / CO2
Data sheet Electric operated valves Type CCM for R744 / CO2 The CCM is an electrically operated valve designed specifically for operation in CO 2 systems. The valve is capable of functioning both as an
NOMENCLATURE WATER COOLED PACKAGE UNITS GENERAL DESCRIPTION. Cleanable Shell and Tube Condenser. Scroll Compressor(s)
NOMENCLATURE Product that perform By people who care 6 WCP S 640 B Q P Blank 50Hz 6 60Hz Blank P R22 R407c Water Cooled Packaged Blank Rotary S Scroll Compressor Model Code Blank Standard Q Special B Floor
BAC / BHC Product Specifications
COMMERCIAL AIR HANDLERS (3 PHASE) 6 to 20 TON / Product Specifications REFRIGERATION CIRCUIT Standard factory-installed thermostatic expansion valves (TXVs) on units; units include TXVs and check valves
CONTINUOUS CAPACITY CONTROL MODELS
This series of air-cooled water chillers up to 400HP has been developed for various requirements of air conditioning systems and industrial chilled water systems, where these equipments are operated under
Crankcase pressure regulator Type KVL
Data sheet Crankcase pressure regulator KVL Crankcase pressure regulator type KVL is fitted in the suction line ahead of the compressor. KVL protects the compressor motor against overload during start-up
Solenoid valves, type EVRA 3 40 and EVRAT REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves, type 40 and EVRAT 10 20 REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Solenoid valves type to 40 and EVRAT 10 to 20 Contents Page Introduction... 3 Approvals...
Electric Expansion Valves
Electric Expansion s Bulletin 100-20-1, January 2011 Page 2 Bulletin 100-20-1UK This supplement to Bulletin 100-20 (September 2008) details the updated Sporlan series of Electric Expansion s. Built on
EVAPORATOR PRESSURE REGULATORS
PARKER (S)PORT, (S)PORT II FEATURES AND BENEFITS Highest capacity commercial regulator in the industry. Sweat-in-place without disassembly. Interchangeable capacity cartridges. Low pressure drop. Manual
MAKING MODERN LIVING POSSIBLE. Solenoid valves Type EVU for fluorinated refrigerants REFRIGERATION AND AIR CONDITIONING.
MAKING MODERN LIVING POSSIBLE Solenoid valves EVU for fluorinated refrigerants REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction... 3 Features... 3 Approvals... 3 Technical
OIL FIRED UPFLOW FURNACE SPECIFICATIONS VHF-ABP (BECKETT AFG)
MODEL NO. OIL FIRED UPFLOW FURNACE SPECIFICATIONS VHF-ABP (BECKETT AFG) VHF-ANP / VHF-ANE (BECKETT NX) HEATING CAPACITY High Fire Med Fire Low Fire High Fire Med Fire Low Fire HEAT INPUT RATE (BTUH) 106,250
Solenoid valve Types EVR 2 EVR 40 NC/NO
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valve s EVR 2 EVR 40 NC/NO EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with fluorinated refrigerants. EVR valves
G35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
High pressure float valve, type HFI REFRIGERATION AND AIR CONDITIONING. Technical leaflet
High pressure float valve, type HFI REFRIGERAION AND AIR CONDIIONING echnical leaflet Contents Page Introduction........................................................................................3
Gear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
EMERSON CLIMATE TECHNOLOGIES-EX
EMERSON CLIMATE TECHNOLOGIES-EX Valves & Controls EX4-EX8 Control Valve The EX4-EX8 are stepper motor driven valves that are optimized for the control of liquid or gaseous mass flow in refrigeration systems.
Anti-acid filter driers DCY
1.1 n Applications Filtering and drying of refrigerants and acid neutralization for liquid lines of refrigerating and air conditioning installations. n Functional features o Products are compatible with
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
INDOOR COOLING COILS FOR DUAL FURNACE APPLICATION
FORM NO. C33-205 REV. 10 Supersedes Form No. C33-205 Rev. 9 INDOOR COOLING COILS FOR DUAL FURNACE APPLICATION RCCU- SERIES The RCCU- series cooling coils are designed for use with two Upflow Gas Furnaces
HERMETIC VALVES. 118
VALVES 117 HERMETC VALVES APPLCATONS The hermetic valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive 97/3/EC, Article 1, Section.1.4 and
XC VALVE RANGE. alco-valves.com
XC VALVE RANGE. alco-valves.com ALCO VALVES DELIVER TRUSTED SOLUTIONS FOR CRITICAL APPLICATIONS. INTRODUCTION ALCO VALVES GROUP LTD The Alco Valves Group has been delivering quality, precision and excellence
OIL FIRED UPFLOW FURNACE SPECIFICATIONS
MODEL NO. VH8FA119P60B VH8FA119T60B (BECKETT AFG) HEATING CAPACITY High Fire * Med Fire Low Fire HEAT INPUT RATE (BTUH) 156,250 140,000 119,000 OUTPUT BTUH 1 132,000 119,000 101,000 SEASONAL EFFICIENCY
SEMPELL HIGH PRESSURE CHECK VALVE MODEL VR500 (ASME)
Designed for use in high temperature and high pressure systems wherever a reverse flow has to be avoided. FEATURES Piston type check valve Body made of forged steel Wear resistant stellite body seat Separated
Electrically Operated Expansion Valve Types AKV 10, AKV 15 and AKV 20
MAKING MODERN LIVING POSSIBLE Data sheet Electrically Operated Expansion Valve Types AKV 10, AKV 15 and AKV 20 AKV are electrically operated expansion valves designed for refrigerating plants. The AKV
HANDBOOK REFRIGERATING SYSTEM PROTECTORS. Ed REFRIGERATING SYSTEM PROTECTORS DP-ED 01/ ENG 1
HANDBOOK Ed. 2017 DP-ED 01/2017 - ENG 1 CHAPTER 3 Hermetic filter driers CERTIFIED BY UNDERWRITERS LABORATORIES INC. For refrigeration plants that use HCFC, HFC or HFO refrigerants APPLICATIONS The filters
Stainless steel - the strong solution
MAKING MODERN LIVING POSSIBLE Stainless steel - the strong solution TU and TC thermostatic expansion valves REFRIGERATION & AIR CONDITIONING DIVISION TU / TC: superior by design and function The function
DANFOSS. Thermostatic Expansion Valves. Nominal Capacity Ranges in TR for Range N -40 to 50 F R-12 R-22 R-410A R-134A R-404A/
TYPE TUA(E), TUB(E), TUC(E), T(E)2, TDE, TDEB, TE, TXI 2, AKV Thermostatic Expansion Valves Valve Applications Features Models Nominal Capacity Ranges in TR for Range N -40 to 50 F R-12 R-22 R-410A R-134A
Water-Cooled Condensing Units. Shell & Tube Condenser Low Operating Cost Durable Construction Built in Receiver
Water-Cooled Condensing Units Shell & Tube Condenser Low Operating Cost Durable Construction Built in Receiver Water-Cooled Condensing Units General Information Units are built with semi-hermetic reciprocating
Product Data Sheet HKK70VSD Revision 1 (Variant Code E)
Product Data Sheet Revision 1 (Variant Code E) 1 Application Application Refrigerant Expansion Device Cooling Type LBP R600a Capillary Static To be used also in appliances with stop valve (technical consultation