International standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
|
|
- Rodney Davidson
- 5 years ago
- Views:
Transcription
1 Gear Pump High Performance Version GP3 up to cm 3 (6. inch 3 ) p max 32 bar (46 PSI) Speed from 35 to 32 RPM Technical Features Operating pressure 29 bar, Peak pressure 32 bar High-strength quality aluminum alloys pump with axial play compensation Low noise level in whole operating range High operational reliability and service life for 3 operation hours High volumetric efficiency up to 98% Symbol R, L International standard flanges acc.to SE, ISO, DIN, GOST Technical Data Nominal Size Parameters Symbol Unit 13, , ctual displacement V g [cm 3 ],14 13,76 17,39 22,46 27,53 34,5 43,47 51,44 61,59 71,1 81,87 99,98 [in 3 ] Rotation speed Pressure at inlet* Pressure at outlet** nominal n n [min -1 ] 15 minimum n min [min -1 ] 4 35 maximum n max [min -1 ] minimum p 1min [bar] -,3 (-4.4 PSI) maximum p 1max [bar],5 (7.3 PSI) max. continuous p 2n [bar] [PSI] maximum p 2max [bar] [PSI] peak p 3 [bar] [PSI] Nominal flow rate (min.) [l. min -1 ] 14,1 19,2 24,2 31,3 38,4 47,5 6,6 71,8 85,9 99, 114,2 139,5 at n n and p n 2n [GPM] Maximum flow rate [l. min -1 ] 31,9 43,4 54,8 7,8 86,8,6 119,9 131,7 145,6 153,9 161,3 177,3 at n max and p max 2max [GPM] Nominal input power (max.) at n n and p 2n P n [kw] 8, 11,7 14,8 19,2 23,5 29, 35,8 4,8 45,3 48, 48,2 52,9 Maximum input power at n max and p 2max P max [kw] 18,4 26,7 33,8 43,7 53,5 62,1 71,6 76, 78,2 76,6 7,6 7,6 Weight m [kg] [lbs] 1) * pressure in the reversible design can be up to p 1 = p 2n -7 bar max. External drainage must be used in case of the reversible design. 2) ** pressure in the reversible design is % lower than shown in the table (depending on operating conditions). 3) p 2n maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation. 4) p 2max maximum pressure - maximum pressure permissible for a short time, max. 2 s. 5) p 3 peak pressure - short-time pressure (fractions of a second) arising in case of a sudden change of the operating mode; any excess of this pressure during operation is impermissible. Gear Pump / Size GP ccm Volumetric efficiency % Mechanical efficiency % 85 Fluid temperature range (NR) C ( F) ( ) Fluid temperature range (FPM) C ( F) ( ) Viscosity range mm 2 /s (SUS) ( ), 12 (5849) for cold start Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN Max. degree of fluid contamination for p 2 2 bar Class 21/18/15 acc. to ISO 446 Max. degree of fluid contamination for p 2 2 bar Class 2/17/14 acc. to ISO 446 Page 1
2 Direction of rotation, reversible design Determine direction of rotation by looking at the drive shaft. The pump can be used only in the specified direction of rotation. The pumps codes (i-directional) have an external drainage with an orifice located in the cover or the flange. CLOCKWISE R COUNTER-CLOCKWISE L REVERSILE INLET OUTLET INLET OUTLET INLET Pressure in this port: min. -,3 bar (-4,4 PSI) max. +,5 bar (+7,3 PSI) M16 x 1,5 (.6) 22 (.89) 1 (.4) INLET OUTLET Ordering GP Gear pump serie 3 Direction of rotation Counter clockwise Clockwise i-directional Flange design Shaft Type 13, , L R RL RM RN SC SE I I U L M K CL CM DN DP DR DS DT DW KJ VO VP V S R C MI MJ ML MM MP GC GD GE GF UD UE UH UI HI HJ HK HL C D E E EC N V H ED EE KC KD KE KF SI SJ SK SL Shaft seal No designation standard 4 without shaft seal Seals NR FPM (Viton) HNR / ports Ports orientation Combination of Flanges and Shafts Flange Design RL RM RN SC SE I/I U L M K Shaft Type CL CM DN DP DR DS DT DW KJ VO VP V Port orientation S R C Page 2
3 Characteristics measured at ν = 32 mm 2 /s (156 SUS) ccm 13,5 ccm 17 ccm bar 22 bar 18 bar 14 bar bar 5 bar bar 27 bar 22 bar 18 bar 14 bar 5 bar 2 bar 2 bar,4 1 1,5 2 2,5 3,2 Rotation speed n [/min],35 1 1,5 2 2,5 3,2 Rotation speed n [/min],4 1 1,5 2 2,5 3,2 Rotation speed n [/min] 22,5 ccm 27 ccm 34 ccm bar bar bar bar bar 2 bar bar 15 bar bar 2 bar bar bar bar bar 5 5 bar 29 bar 24 bar 2 bar 14 bar bar 2 bar 43 ccm 51 ccm bar 24 bar 19 bar 14 bar 9 bar 5 bar 5 bar 15 bar bar 29 bar 24 bar 19 bar 14 bar 9 bar 5 bar 2 bar 2 bar 29 bar 25 bar 2 bar 2 bar,35 1 1,5 2 2,5 3,2 Rotation speed n [/min] ccm 29 bar 23 bar 19 bar 14 bar bar 5 bar 29 bar 23 bar 19 bar 14 bar bar 5 bar 2 bar 2 bar,35 1 1,5 2 2,5 3,2 Rotation speed n [/min] 29 bar 24 bar 19 bar 14 bar bar 5 bar bar 29 bar 19 bar 24 bar 14 bar 5 bar 2 bar 2 bar,35 1 1,5 2 2,5 3 Rotation speed n [/min] bar bar bar bar bar 75 5 bar 5 2 bar 25,35 1 1,5 2 2,5 3 5 bar bar 28 bar 23 bar 19 bar 14 bar 2 bar Rotation speed n [/min] bar 19 bar 14 bar bar 5 bar 27 bar 19 bar 14 bar bar 25 bar 5 bar 2 bar 2 bar bar bar bar 3 bar 2 5 bar 15 bar bar 5 bar 2 bar 2 bar,35 1 1,5 2 2,5 3,35 1 1,5 2 2,5 Rotation speed n [/min] Rotation speed n [/min] 25 bar 2 bar Page 3
4 Characteristics measured at ν = 32 mm 2 /s (156 SUS) 71 ccm 82 ccm ccm 7 23 bar 6 18 bar bar 3 bar 2 5 bar 23 bar 18 bar 14 bar bar 5 bar 2 bar 2 bar,35 1 1,5 1,8 Rotation speed n [/min] bar bar bar bar 3 75 bar 2 5 bar 5 bar 125 bar 2 bar 5 2 bar bar25 15 bar bar 75 bar bar 15 bar bar 4 bar 3 75 bar 2 5 bar 75 bar 5 bar 2 bar 2 bar,35 1 1,5 1,8,35 1 1,5 1,8 Rotation speed n [/min] Rotation speed n [/min] 18 bar 15 bar 125 bar bar Ordering - Multiple Version GP3 - / - - / - Gear pump serie 3 Direction of rotation Counter clockwise Clockwise i-directional Front pump (shaft side) 13, , Rear pump L R S C Front pump MI MJ ML MM MP GC GD GE GF UD UE UH UI HI HJ HK HL Rear pump C D E E EC ED EE KC KD KE KF SI SJ SK SL N V H No designation 4 Shaft seal standard without shaft seal Seals NR FPM (Viton) HNR / ports lways from left: - Ports orientation Use blind plug for not used ports Flange design RL RM RN SC SE I I U L M K CL CM DN DP DR DS DT DW KJ VO VP V Shaft Type Port orientation S C Page 4
5 Flange design in millimeters (inches) RL RM 148 (5.83) 128 (5.4) 42,2 (1.66) 118,5 (4.67) 98,5 (3.88) 21,8 (.86) 25 (.98) 5 (.2) 5,8 (2.) f8 162 (6.38) 143 (5.63) 71,5 (2.81) 123 (4.84) 4 (4.9) 24,5 (.96) [ 28 (1.)] 7 (2.76) f8 5 (.2) 4x 11 (.43) 4x 11 (.43) RN 122 (4.8) 2,5 (4.4) 25 (.98) 8 (.31) SC 174 (6.85) 25 (.98) [5 (. 2 )] 165 (6.5) 145 (5.71) 48 (1.89) 24,5 (.96) 5 (4.13) f8 155 (6.) 6 (2.36) 2x 14 (.55) 1,6 (4. ) f8 9 (. 35) 4x 11 (.43) 2(. 79) SE 118 (.5) 46 9 (. 354) 71 (. 28) 15 (. 59) I 118 (.5) 46 [8 (. 425] ) 8 (3.15) 78 (3.7) 15 (. 59) 118 ( ) 9 ( ) [153,8 ( 6. 6 ) ] 1,6 (4. ) f8 149 (5.87) 8 ( ) 8 (3.15) 21,8 (.86) 8 (3.15) 9(. 35) 4 x 13 (.51) 8 (. 31) 1 (. 433) 4 x 14,3 (.5 6 ) 2 (. 79) 2 (. 79) I 118 (.5) 46 8 (3.15) 52 (2.5) 15 (. 59) U 73 (2.87) 118 (.5) (2.6) 18 (.71) 3 (.12) 149 (5.87) 8 ( ) 8 (3.15) [8 (. 425] ) 4 (1.57) 4 x 13 (.51) 2(. 79) 8 (3.15) f8 8,5 (. 33) 21,8 (.86) 3x 12,2 (.48) 2(. 79) 52 (2.5) f8 Page 5
6 Flange design in millimeters (inches) K 134 (5.28) 1 (4.33) 59 (2.32) 13 (.51) 5 (.2) 6x 11 (.43) 53 (2.9) 13 (.51) 4 (.16) 15,7 (5.93) 86 (3.39) 4x 11 (.43) 114 (4.49) 9 (3.54) f8 16 (6.3) 128 (5.4) 5 (4.13) 85 (3.35) f8 2(. 79) 123 (4.84) 2,2 (.8) M 78 (3.7) 118 (4.65) 78 (3.7),9 (.43) 44,9 (1.77) L 44,9 (1.77),9 (.43) 118 (4.65) 78 (3.7) 78 (3.7) 25 (.98) 7,2 (.28) 52 (2.5) f7 2x 12 (.47) 2x 12 (.47) Page 6
7 Shaft design in millimeters (inches) driving device must not generate an axial or a radial load of the pump shaft, unless this is exclusively permitted for the pump with a front-end bearing. sk producer for the version with front-end bearing. Maximal torque for clutch between sections in multiple version is 22 Nm. CL CM DN 5,8 (2.) 21,6 (.85) 11,2 (.44) 1:8 42 (1.65) 47 (1.85) M14x1,5 (.6) KEY 4x7,5 WSHER NUT M14x1,5 12,1 (.48) Max. 3 Nm (221.3 lbf.ft) 5 (4.13) 25 (.98) 1:5 45 (1.77) 53 (2.9) KEY 5x7,5 WSHER NUT M16x1,5 M16x1,5 (.6) 13,5 (.53) Max. 3 Nm (221.3 lbf.ft) 1,6 (4.) 4,3 (1.59) 31,3 (1.23) 25 (.98) 9 (.35) 21,8 (.86) INVOLUTE SPLINE SE 7/8 16/32 DP13T Max. 34 Nm (25.8 lbf.ft) DP DR KJ INVOLUTE SPLINE SE 1 16/32 DP15T Max. 36 Nm (265.5 lbf.ft) 24 (.94) 3 (1.18) 9 (.35) 4 (1.57) 25 (.98) 1,6 (4.) 14 (.55) 15 (.59) 25 (.98) 52 (2.5) Max. 34 Nm (25.8 lbf.ft) EUILTERL SPLINE UNI x25x5 12 (.47) 3 (.12) Max. 23 Nm (169.6 lbf.ft) 25 (.98) 52 (2.5) (.39) DS DT DW 55 (2.17) 8,5 (.33) 39 (1.54) 48 (1.89) 5 (.2) 35 (1.38) 25 (.98) 52 (2.5) 33 (1.3) 21,2 (.83) 24,7 (.97) 35,9 (1.41) 8 (3.15) Max. 34 Nm Max. 4 Nm (25.8 lbf.ft) (295. lbf.ft) EUILTERL SPLINE STRIGHT-FLNKED GROOVING 6dr. Ø2 8x32x36x6 DIN (3.15) 9 (3.54) Max. 34 Nm (25.8 lbf.ft) INVOLUTE SPLINE ZV 25x1,5x16 5 (.2) VO VP V KEY 6,35h9x6,35x4 Max. 3 Nm (221.3 lbf.ft) 51 (2.1) 6 (2.36) 22,2 (.87) 25 (.98) 1,6 (4.) KEY 5h9x5x36 4 (1.57) 46 (1.81) 2 (.79) 21,6 (.85) 5,8 (2.) Max. 18 Nm (132.8 lbf.ft) KEY 8h9x7x45 53 (2.9) 58 (2.83) 25 (.98) 27,9 (1.) 7 (2.76) Max. 34 Nm (25.8 lbf.ft) Page 7
8 Ports design in millimeters (inches) Metric thread according to ISO 6149 C D C D to 51 (3.11) MM M33x2 4 (1.57) MJ M27x2 16 (.63) 33 (1.3) 18 (.71) above 51 (3.11) MP M48x2 56 (2.2) MM M33x2 18 (.71) 4 (1.57) 1 (.4) MD M16x1,5 22 (.89) drain 14 (.55) ME M18x1,5 24 (.94) 1 (.4) SPP pipe thread according to to 17 (1.4) GC G 1/2 14 (.55) 33 (1.3) C D C D GC G 1/2 14 (.55) 33 (1.3) ( ) GD G 3/4 16 (.63) 39 (1.54) 1 (.4) GD G 3/4 16 (.63) 39 (1.54) ( ) GE G 1 45 (1.77) 18 (.71) above 51 (3.11) GF G 1 1/4 57 (2.24) GE G 1 18 (.71) 45 (1.77) 1 (.4) UNF thread according to SE to 17 (1.4) UE 1-1/16-12UNF ( ) ( ) UH C D C D 1-5/16-12UNF above 39 (2.38) UI 1-5/8-12UNF 2 19 (.75) 23 (.91) 41 (1.61) 49 (1.93) 58 (2.28) 1 (.4) UD UE UH 7/8-14UNF 1-1/16-12UNF 1-5/16-12UNF 17 (.67) 19 (.75) 23 (.91) 34 (1.34) 41 (1.61) 49 (1.93) 1 (.4) Flanged fittings according to DIN 891/892 LL HL 26 (1.2) M 51 (2.1) HI 4 (1.57) 16 (.63) 18 (.71) M8 16 (.63) HK 25 (.98) M8 55 (2.17) HJ 55 (2.17) Flanged fittings according to SE, metric thread to 61 (3.72) above 61 (3.72) EC ED EE I I 25,4 (1.) 3,5 (1.2) 39,3 (1.55) M M12 22 (.87) 27 (1.6) 52,4 (2.6) 58,7 (2.31) 69,8 (2.75) 26,2 (1.3) 3,2 (1.19) 35,7 (1.41) E EC ED 9 (.75) 25,4 (1.) 3,5 (1.2) M 22 (.87) 47,6 (1.87) 52,4 (2.6) 58,7 (2.31) 22,2 (.87) 26,2 (1.3) 3,2 (1.19) Page 8
9 Ports design in millimeters (inches) Flanged fittings according to SE, UNC thread Flanged fittings - cross to 61 (3.72) above 61 (3.72) C D E I I 25,4 (1.) 3,5 (1.2) 39,3 (1.55) 3/8-16-UNC 22 (.87) 7/16-14-UNC 1/2-13-UNC 27 (1.6) 52,4 (2.6) 58,7 (2.31) 69,8 (2.75) 26,2 (1.3) 3,2 (1.19) 35,7 (1.41) C D 19 (.75) 25,4 (1.) 3,5 (1.2) 3/8-16-UNC 22 (.87) 7/16-14-UNC 29 (1.14) 47,6 (1.87) 52,4 (2.6) 58,7 (2.31) 22,2 (.87) 26,2 (1.3) 3,2 (1.19) LL KD 26 (1.2) M 51 (2.1) KC 4 (1.57) 16 (.63) 18 (.71) M8 16 (.63) KF 25 (.98) M8 55 (2.17) KE 55 (2.17) Flanged fittings - square to 43 (2.62) SL 23 (.91) M8 46 (1.81) SK 16 (.63) M8 46 (1.81) 22 (.87) 22 (.87) above 43 (2.62) SJ 27 (1.6) M 54 (2.13) SI 19 (.75) M 54 (2.13) Drain C D LL MD M16x1,5 22 (.87) 14 (.55) ME M18x1,5 24 (.94) 1 (.4) GPP Pumps - basic design in millimeters (inches) GP3-*R-IDS-SG*G*-N 36,8 (1.45) 25 (.98) 15 (.59) 8,5 (.33) Fr max = 32 N Fa max = 19 N 21,8 (.86) 8 (3.15) 17 (1.6) 112 (4.41) 171 (6.73) 61 (3.76) 13,5 (5.14) 28 (8.2) 27 (1.68) 116,3 (4.58) 179,5 (7.7) 71 (4.34) 134,8 (5.31) 216,5 (8.52) 34 (2.8) 119 (4.69) 185 (7.28) 82 (5.) 139,3 (5.48) 225,5 (8.88) 43 (2.65) 122,8 (4.43) 192,5 (7.58) (6.) 15,8 (5.94) 248,5 (9.78) 51 (3.14) 126,3 (4.97) 199,5 (7.85) 2 (.79) 78 (3.7) 39 (1.54) 55 (2.17) Page 9
10 GP3 Pumps - basic design in millimeters (inches) GP3-*R-RLCL-SG*G*-N 25 (.98) 25 (.98) 5 (.2) (.62) 56 (2.2) 112 (4.41) 43 (2.65) 69,8 (2.75) 139,5 (5.49) 13,5 (.84) 57,5 (2.26) 115 (4.53) 51 (3.14) 73,3 (2.89) 146,5 (5.77) 17 (1.6) 59 (2.32) 118 (4.65) 61 (3.76) 77,5 (3.5) 155 (6.) 22,5 (1.37) 61,3 (2.41) 122,5 (4.82) 71 (4.34) 81,8 (3.22) 163,5 (6.44) 27 (1.68) 63,3 (2.49) 126,5 (4.98) 82 (5.) 86,3 (3.4) 172,5 (6.79) 34 (2.8) 66 (2.6) 132 (5.2) (6.) 97,8 (3.85) 195,5 (7.7) 21,8 (.86) 5,8 (2.) 47 (1.85) GP3-*R-IDS-SG*G*-N 25 (.98) 15 (.59) 8,5 (.33) 13 (.51) (.62) 83 (3.27) 139 (5.47) 51 (3.14),3 (3.95) 173,5 (6.83) 17 (1.6) 86 (3.39) 145 (5.71) 61 (3.76) 4,5 (4.11) 182 (7.17) 27 (1.68) 9,3 (3.56) 153,5 (6.4) 71 (4.34) 8,8 (4.28) 19,5 (7.85) 34 (2.8) 93 (3.66) 159 (6.26) 82 (5.) 113,3 (4.46) 199,5 (6.44) 43 (2.65) 96,8 (3.81) 166,5 (6.56) (6.) 124,8 (4.91) 222,5 (8.76) 21,8 (.86) 25 (.98) 2 (.79) 39 (1.54) 8 (3.15) 52 (2.5) 55 (2.17) GP3-*/GP1-*L-RLCL-SM*M*/M*M*-N / 1,6 (1.6 /. ) 68 (2.68) 34 (1.34) 38,3 (1.51) 19,2 (.76) 17 / 2,5 (1.6 /.15 ) 68 (2.68) 34 (1.34) 41,5 (1.63) 2,8 (.82) 17 / 3,6 (1.6 /.22 ) 68 (2.68) 34 (1.34) 45,6 (1.8) 22,8 (.9) 27 / 1,6 (1.65 /. ) 76,5 (3.1) 38,3 (1.51) 38,3 (1.51) 19,2 (.76) 27 / 2,5 (1.65 /.15 ) 76,5 (3.1) 38,3 (1.51) 41,5 (1.63) 2,8 (.82) 27 / 3,6 (1.65 /.22 ) 76,5 (3.1) 38,3 (1.51) 45,6 (1.8) 22,8 (.9) 34 / 1,6 (2.8 /. ) 82 (3.23) 41 (1.61) 38,3 (1.51) 19,2 (.76) 34 / 2,5 (2.8 /.15 ) 82 (3.23) 41 (1.61) 41,5 (1.63) 2,8 (.82) 34 / 3,6 (2.8 /.22 ) 82 (3.23) 41 (1.61) 45,6 (1.8) 22,8 (.9) 43 / 1,6 (2.62 /. ) 89,5 (3.52) 44,8 (1.76) 38,3 (1.51) 19,2 (.76) 15 (.59) 1 9,7 (.38) 1 21,8 (.86) 5 (.2) (1.85) (.98) 5,8 (2.) GP3-*/GP2-*R-RLCL-SK*K*/K*K*-N / 8 (3.11 /.49 ) 96,5 (3.78) 48,3 (1.9) 57 (2.24) 28,5 (1.12) 34 / 11 (2.8 /.67 ) 82 (3.23) 41 (1.61) 62,5 (2.46) 31,3 (1.23) 51 / 11 (3.11 /.67 ) 96,5 (3.78) 48,3 (1.9) 62,5 (2.46) 31,3 (1.23) 8xE 16 (.63) D C 6,1 (.24) 4x M 16 (.63) 51 (2.1) 26 (1.2) 21,8 (.86) 5 (.2) 5,8 (2.) 2 (.79) 1 38 (1.5) (1.85) (.98) Page
International standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
Gear Pump High Performance Version GP3 up to 1 cm 3 (6.1 inch 3 ) p max 3 (46 PSI) Speed from 35 to 32 RPM Technical Features Operating pressure 29 bar, Peak pressure 3 High-strength quality aluminum alloys
More informationInternational standard flanges acc.to SAE, ISO, DIN, GOST. [bar] 0,5 (7.3 PSI)
Gear Pump High Performance Version GP up to 31 cm 3 (1.89 inch 3 ) p max 3 bar ( PSI) Speed from to RPM Technical Features Operating pressure 8 bar, Peak pressure 3 bar High-strength quality aluminum alloys
More informationQHD1 TABLE OF CONTENTS. Gear Pump Catalogue Table of Contents
TABE OF CONTENTS Table of Contents DESCIPTION... 2 BASIC PATS OF PUMP... 2 PAAMETE TABE... 3 FOMUAS USED FO CACUATION... 4 PUMP EFFICIENCIES... 4 WOKING IQUID... 5 PESSUE OAD... 5 OTHE EQUIEMENTS... 6
More informationfrom 350 to 3200 RPM GEAR PUMPS QHD
Displacement Pressure Speed from 10,00 to 82,00 ccm up to 320 bar from 350 to 3200 PM GEA PUMPS TABE OF CONTENTS Table of Contents DESCIPTION... 2 BASIC PATS OF PUMP... 2 PAAMETE TABE... 3 FOMUAS USED
More informationDisplacement from 10 to 100 ccm Pressure up to 290 bar Speed from 400 to 3200 RPM GEAR MOTORS QM2
Displacement from 10 to 100 ccm Pressure up to 290 bar Speed from 400 to 3200 PM GEA MOTOS QM2 Gear Motor Catalogue QM2 TABLE OF CONTENTS DESCIPTION......................................................................................................................
More informationRA / Internal Gear Pump Model GP2, Series 2X Fixed Displacement. Typical application:
Sizes 6.3 to 16 Internal Gear Pump Model GP2, Series 2X Fixed Displacement up to 576 PSI.397 to.98 in 3 (35 bar) (6.5 to 16 cm 3 ) RA 1 23/6.97 RA 1 23/6.97 Characteristics: Peak pressure of up to 576
More informationGear Motors. Series PGM Fixed Displacement Motors, Aluminium Designs
Gear Motors Series PGM Fixed Displacement Motors, Aluminium Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationGEAR MOTORS. from 500 to 4000 RPM
Displacement Pressure Speed from 2,00 to 15,00 ccm up to 300 bar from 500 to 4000 PM GEA MOTOS TAE OF CONTENTS Table of Contents DESCIPTION... 2 ASIC PATS... 2 PAAMETE TAE... 3 FOMUAS USED FO CACUATION...
More informationGEAR PUMPS. from 500 to 4000 RPM
Displacement Pressure Speed from 2,00 to 15,00 ccm up to 310 bar from 500 to 4000 PM GEA PUMPS TABE OF CONTENTS Table of Contents TABE OF CONTENTS... 1 BASIC DESCIPTION... 2 BASIC PATS... 2 PAAMETE TABE...
More informationRA / Internal Gear Pump Model GP3, Series 3X Fixed Displacement. Typical application:
Sizes 20 to 32 Internal Gear Pump Model GP3, Series 3X Fixed Displacement up to 5076 PSI 1.25 to 1.98 in 3 (350 bar) (20.6 to 32.5 cm 3 ) RA 10 234/07.97 Characteristics: Peak pressure of up to 5.076 PSI
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationRA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)
R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve
More informationYMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
More informationTorque. Motor model R
MA series motors CHARACTERISTICS OF THE MA SERIES MOTORS (SAE Motor model Displacement Continuous max. speed (1 Intermittent max. speed (1 Max. flow absorbed Torque Torque at 350 bar (5100 psi Theoretical
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationHydraulic gear pumps and motors
PL 01 T E DISPLCEMENTS From 0.07 in 3 /rev (1.07 cm 3 /rev) To 5.56 in 3 /rev (91.10 cm 3 /rev) Hydraulic gear pumps and motors through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
More informationRA / Radial Piston Motor Model MR, MRE Fixed Displacement. Table of Contents. Replaces: RA /10.95
Radial Piston Motor Model MR, MRE Fixed Displacement Sizes 160 to 9500 6100 PSI (up to 420 bar) 582 in 3 (up to 9542 cm 3 ) 25,075 lb-ft (up to 34000 Nm) RA 15 228/10.95 Replaces: 12.94 Wide range of displacements
More informationFixed Displacement Motor AA2FM (A2FM)
Fixed Displacement Motor 2FM (2FM) Series 6, for Open and Closed Circuits xial Piston, ent xis Design 5800 psi 6500 psi rueninghaus Hydromatik Sizes 5 1000 Nominal Pressure up to Peak Pressure up to (400
More informationTABLE OF CONTENTS. Gear Pump Catalogue Table of Contents
TABE OF CONTENTS Table of Contents DESCIPTION... 2 BASIC PATS OF PUMP... 2 PAAMETE TABE... 3 FOMUAS USED FO CACUATION... 4 PUMP EFFICIENCIES... 4 WOKING IQUID... 5 PESSUE OAD... 5 DIECTION OF OTATION...
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationVariable displacement axial piston pumps,
ariable displacement axial piston pumps, for open circuit DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) MAX SPEED 3000 min -1 PRESSURE Max. continuous Max. intermittent
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationfrom 500 to 3000 RPM GEAR PUMPS T3S
Displacement Pressure Speed from 9,00 to 31,00 ccm up to 310 bar from 500 to 3000 PM GEA PUMPS TABE OF CONTENTS Table of Contents DESCIPTION... 2 BASIC PATS OF PUMP... 2 PAAMETE TABE... 3 FOMUAS USED FO
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationExternal Gear Pumps Series F
External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationSR1A-A2. Functional Description HA /2012. Directly Operated Pressure Relief Valves. Replaces HA /2010. Screw-in cartridge design
Directly Operated Pressure Relief Valves SRA-A2 HA 5063 7/202 3/4-6 UNF p max 350 bar (5080 PSI) Q max 30 L/min (7.9 GPM) Replaces HA 5063 8/200 Screw-in cartridge design 4 pressure ranges Pressure setting
More informationVariable displacement axial piston pumps
Variable displacement axial piston pumps SVP series GENERAL INFORMATIONS Variable displacement axial piston pump swash plate design for open circuit-flow sharing control valve. The pump has been designed
More informationPump model PVPP-*-3023 PVPP-*-3033 PVPP-*-4048 PVPP-*-5060 PVPP-* Max flow at 1500 rpm and 7 bar [l/min]
900 Table A0obs/E Axial piston pumps type PVPP, variable displacement, high pressure operation Hydraulic and electrohydraulic control obsolete components - availability on request PVPP-SLER-08/D PVPP are
More informationBENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3
ENT XIS PISTON MOTORS SERIES HPM FLNGE ISO 30-2 HPM pag.3 TECHNICL FETURES ENT XIS PISTON MOTORS SERIES HPM FLNGE ISO 30-2 TECHNICL FETURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80 90 108 130
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationGEAR PUMPS. Displacement from 0.18 to 3.20 ccm Pressure up to 230 bar Speed from 800 to 8000 RPM
Displacement from 0.18 to 3.20 ccm Pressure up to 230 bar Speed from 800 to 8000 PM GEA PUMPS X Gear Pump Catalogue X TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically
More informationExternal gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
More informationGroup 1 Gear Pumps Technical Information General Information
General Information OVERVIEW The Sauer-Danfoss Group is a range of peak performance fixed-displacement gear pumps. Constructed of a high-strength extruded aluminum body with aluminum cover and flange,
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS DVP SERIES
VARIABLE DISPLACEMENT AXIAL PISTN PUMPS DVP SERIES GENERAL INFRMATINS / INSTRUCTINS This variable displacement piston pump has dual flows and an additional piggybacked gear pump for auxiliary service,
More informationVSK. Functional Description HA /2008. Constant Flow - Control Valves VSK4 VSK2 VSK2 VSK4. Replaces HA /2000
Constant Flow - Control Valves VSK HA 5 5/008 Size 06 p max up to 0 bar Q max up to 0 L/min Replaces HA 5 /000 Wide range of throttling oriffices VSK4 Two models: - cartridge - screw-in cartridge valve
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationBENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3
ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 HPM pag.3 TECHNICAL FEATURES ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 TECHNICAL FEATURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80
More informationFixed Displacement Motor A10FM A10FE
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service Fixed Displacement Motor 10FM 10FE RE 91 172/06.06 1/24 Replaces: 01.03 Technical Data Sheet Size 10...63
More informationCONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More informationAxial Piston Fixed Motor A10FM / A10FE (US-Version)
xial Piston Fixed Motor 10FM / 10FE (US-Version) R- 91172/03.12 1/32 Replaces: 01.11 Data sheet Series 52 Sizes 10 to 63 Nominal pressure 4000 psi (280 bar) Maximum pressure 5100 psi (350 bar) Open and
More informationGear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs
Gear Pumps Series PGP Fixed Displacement Pumps, Cast-Iron Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Table
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS FEATURES Variable displacement axial piston pumps swash plate design ideally suited for medium and high pressure open circuit applications. The compact design allows
More informationSeries PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
More informationPVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS
14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group
More informationAP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
More informationGear Pump Model G4, Series 2X
s 40 to 100 Gear ump Model G4, Series 2X 3000 SI (210 bar) 6.1 in 3 (100 cm 3 ) 10 042/03.95 10 042/03.95 eplaces: 01.91 SE connection flanges Sleeve bearings for long life Single block bearings ISO or
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationAXIAL PISTON MOTORS SHMF
SECTIONAL VIEW Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output shaft Valve block Shuttle valve Swashplate 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working
More informationAxial piston variable pump (A)A4VSO
Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
More informationVariable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More informationExternal Gear Pumps Series F
External Gear Pumps Series F AZPF-... Fixed pumps V = 4.0...28 cm 3 /rev Overview of contents ontents Page General 2 Product overview 3 single pumps 4 multiple pumps 5 rive shaft 6 Front cover 7 Line ports
More informationExternal Gear Pumps Series F
External Gear Pumps Series F RE 10 089/02.07 Replaces: Series F Issue 04.04 AZPF-... Fixed pumps V = 4.0...28 cm 3 /rev Overview of contents ontents Page General 2 Product overview 3 single pumps 4 multiple
More informationAP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:
Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationGEAR PUMPS. from 500 to 8000 RPM
Displacement Pressure Speed from 0,18 to 3,20 ccm up to 260 bar from 500 to 8000 PM GEA PUMPS X TABE OF CONTENTS Table of Contents X DESCIPTION... 2 BASIC PATS OF PUMP... 2 TABUKA PAAMETŮ... 3 FOMUAS USED
More informationAxial piston variable pump A10V(S)O Series 31. Americas. RE-A Edition: Replaces:
Axial piston variable pump A10V()O eries 31 Americas RE-A 92701 Edition: 02.2017 Replaces: 03.2012 ize 18 (A10VO) izes 28 to 140 (A10VO) Nominal pressure 4100 psi (280 bar) Maximum pressure 5100 psi (350
More informationVPPM /110 ED VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
16 100/110 ED VPPM VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS OPERATING PRINCIPLE The VPPM pumps are variable displacement axial-piston pumps with variable swash plate, suitable for applications with open
More informationUŽSISAKYKITE internetu telefonu el. paštu
Features Axial piston pump MA10VO in swashplate design is used in open loop circuits. Flow is proportional to drive speed and displacement. By adjusting the position of the swashplate it is possible to
More informationFixed Displacement Motor A2FM
rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97
More informationTPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationVariable Axial Piston Pump A10V Series - 52/53
Variable Axial Piston Pump A10V eries - 52/53 eries 52/53 - Open Circuit Peak Pressure 315 bar (4,600 psi) Nominal Pressure 250 bar (3,600 psi) izes 10cm 3 /rev - 63cm 3 /rev (0.64in 3 /rev-3.8in 3 /rev)
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS DVP SERIES
VARIABLE DISPLACEMENT AXIAL PISTN PUMPS DVP SERIES GENERAL INFRMATINS / INSTRUCTINS This variable displacement piston pump has dual flow and an additional piggybacked gear pump for auxiliary service, open
More informationAxial piston variable displacement pump type V60N
Axial piston variable displacement pump type V60N For commercial veicles Open circuit Nominal pressure Maximum pressure p max Geometric displacement V max = 350 bar (5075 psi) = 400 bar (5800 psi) = 90
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationAxial Piston Variable Pump AA4VG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump AA4VG RA 92003-A/06.09 1/64 Replaces: 03.09 Data sheet Series 32 Size 28...
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More information2.3 MEDIUM HEAVY DUTY SERIES
2 2.3 MEDIUM HEAVY DUTY SERIES CONTENTS PPV11 Ordering Code 2.3.1 Medium Heavy Duty Series 2.3.2 Torque limiter settings Technical Information 2.3.3 Specifications 2.3.4 Hydraulic fluids 2.3.5 Viscosity
More informationENGINEERING DATA. Variable Axial Piston Pump A10V Series - 52/53. w w w. F l u i D y n e F P. c o m E m a i l : F l u i D y n e F P.
ENGINEERING DATA Variable Axial Piston Pump A10V eries - 52/53 eries 52/53 - Open Circuit Peak Pressure 315 bar (4,600 psi) Nominal Pressure 250 bar (3,600 psi) izes 10cm 3 /rev - 63cm 3 /rev (0.64in 3
More informationFixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design
Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Sizes 71 0 Nominal pressure 3 bar Peak pressure 400 bar RE 91455/01.94 RE 91455/01.94 Replaces 07.88 Other fixed displacement
More informationAxial piston variable pump A10VSO series 32
xial piston variable pump 10VO series 32 RE 92714 Issue: 10.2014 Replaces: 06.2011 izes 45 to 180 Nominal pressure 280 bar Maximum pressure 350 bar For industrial application areas Open circuit Characteristics
More informationVPN2-10/MR. Functional Description HU /2008. Pilot Operated Pressure Relief Valves. Replaces HU /2005
Pilot Operated Pressure Relief Valves VPN2-10/MR Size 3/8 (10)...5076 PSI (350 bar)...40 GPM (150 L/min) 7/2008 Replaces 2/2005 Modular and in-line design Five pressure ranges Two pressure adjustment options:
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Manual operator Solenoid Individual mounting Sub-base non Sub-base Manifold mounting Manifold base Sub-base/ manifold base non with latching solenoid
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationAxial piston fixed motor A2FM series 70. Americas. RE-A Edition:
Axial piston fixed motor A2FM series 70 Americas RE-A 91071 Edition: 05.2015 A2FMN (Sizes 90 and 107): Nominal pressure 300 bar Maximum pressure 350 bar A2FMM (Sizes 80 and 90): Nominal pressure 400 bar
More informationHPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
More information29 160/ Proportional Pressure Relief Valve Model DBE, (Series 5X) Ordering Code DBE 5X Y G24 1/ PSI (350 bar)
Size 10, 25 Proportional Pressure Relief Valve Model DE, (Series 5X)... 5100 PSI (350 bar)... 106 GPM (400 L/min) R 29 160/06.98 R 29 160/06.98 Replaces: 05.94 Operation by means of proportional solenoid
More informationHeavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 AXIAL PISTON PUMPS SHPV SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid
More informationVJO1-06/S. Functional Description HA /2010. Check Valves. Replaces HA /2008. Size to 06 (1/4) bar (4600 PSI)...20 L/min (5.
Check Valves VJO1-06/S Size to 06 (1/4)...320 bar (4600 PSI)...20 L/min (5.3 GPM) HA 5004 11/2010 Replaces HA 5004 4/2008 Small dimensions Two models Poppet design Leak-free closure in one direction VJO1-06/Sx-1
More informationAxial piston variable pump A4VG Series 32. Europe. RE-E Edition: Replaces:
Axial piston variable pump A4VG Series 32 Europe RE-E 92003 Edition: 04.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit Size 28 to 125 Nominal pressure 400 bar Maximum pressure
More informationAxial piston variable displacement pump type V60N, Serie 03
Axial piston variable displacement pump type V60N, Serie 03 mainly for mobile applications, commercial trucks etc. Open circuit Nominal pressure Maximum pressure p max Geometric displacement V max = 350
More informationSD3E-B2. Functional Description. 2/2 Way Solenoid Operated Directional Control Valves Poppet Type HA /2012. Replaces HA /2010
/ Way Solenoid Operated Directional Control Valves Poppet Type SD3E-B 7/8-4 UNF p max 40 bar (609 PSI) Q max 75 L/min (9.8 GPM) H 4063 7/0 Replaces H 4063 0/00 / way cartridge valves solenoid operated
More informationGenuine Metaris MA10VO/VSO Technical Catalog. Variable Displacement Piston Pump - A10V Series 31 & 52
Genuine Metaris MA10VO/VSO Technical Catalog www.metaris.com Contents General Series MA10VO/VSO Series 31 4 Page Features 4 Technical Data 5 Performance Information 6 Model Code Breakdown 9 Fluid Info
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control
More informationHYDRAULIC-MOTORS. Radial Piston Motors with fixed displacement RM...X series V g = 250 cm 3 /rev cm 3 /rev
s with fixed displacement RM...X series V g = 250 cm 3 /rev - 900 cm 3 /rev HYDRAULIC-MOTORS Catalogue No. HM1-015E RM 250X - RM 900X Page 2 Features: many displacements for all applications very high
More informationAxial piston variable pump (A)A10VSO Series 31. Americas. RE-A Edition: Replaces:
Axial piston variable pump (A)A10VO eries 31 Americas RE-A 92711 Edition: 04.2017 Replaces: 04.2012 All-purpose medium pressure pump izes 18 to 140 Nominal pressure 4100 psi (280 bar) Maximum pressure
More informationAxial piston variable pump A10V(S)O Series 31
Axial piston variable pump A10V()O eries 31 RE 92701 Edition: 06.2016 Replaces: 01.2012 ize 18 (A10VO) izes 28 to 1 (A10VO) Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Features Variable
More informationAxial piston pumps type PVPC variable displacement, by a full line of mechanical controls
www.atos.com Table A600/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,
More informationHydraulic Motor (Radial Piston, Multi-Stroke)
Industrial Hydraulics Electric Drives and Controls inear Motion and ssembly Technologies Pneumatics Service utomation Mobile Hydraulics Hydraulic Motor (Radial Piston, Multi-Stroke) RE 15 08/10.94 1/8
More information