Fire Test Report API Standard 6FA, Third Edition, April 1999 Specification for Fire Testing of Valves. Performed for. Valvtechnologies.
|
|
- Pearl Craig
- 5 years ago
- Views:
Transcription
1 Fire Test Report API Standard 6FA, Third Edition, April 1999 Specification for Fire Testing of Valves Performed for Valvtechnologies 8 inch Class 1500 Trunnion Ball Valve Product Code: N8C1-JJ-XX-B EM-P01 Project Number: Test Date: March 8, 2013 Performed by YARMOUTH RESEARCH AND TECHNOLOGY, LLC 434 Walnut Hill Road North Yarmouth, ME USA (207) info@yarmouthresearch.com
2 Customer: Valvtechnologies Date: 3/8/2013 Specification: API Standard 6FA, Third Edition, April 1999 (R2008) Product Description: 8 inch Class 1500 Trunnion Ball Valve Project Number: PN Product Code: N8C1-JJ-XX-B EM-P01 Yarmouth Engineer: Matthew J. Wasielewski, P.E. Equipment Confirmed to be in Calibration to NIST Standards: Yes Burn and Cool Down Test Burn Start Time: 16:07:00 Average Pressure During Burn: 2719 psig Seat Leak Rate During Burn: 10 ml/min Allowable Seat Leak Rate: 3200 ml/min External Leak Rate During Burn/Cool Down: 0.0 ml/min Allowable External Leak Rate: 800 ml/min Amount of Time of Avg. Cal. Blocks > 650 deg. C: 24.5 minutes Were Test Conditions Within Compliance? Yes Were the Valve Leakages Below the Allowables? Yes Operational Test Did Valve Unseat and Open Fully?: Yes Average Pressure During Test: 2868 psig External Leak Rate After Operating: 0.0 ml/min Allowable External Leak Rate: 1600 ml/min Was the Leakage Below the Allowable? Yes Does Valve Pass or Fail the Test Standard? PASS Witnesses Page 2 of 16
3 YARMOUTH RESEARCH AND TECHNOLOGY, LLC Fire Test Information Sheet Valve Manufacturer s Name: Valve Manufacturer s Address: VALVTECHNOLOGIES 5904 Bingle Road Houston, Texas Did valve meet all required hydrostatic, leakage and other production pressure tests? Valve Product Code: Valve Description Size: Pressure Rating: Type: Weight: Reduced or Full Bore: Body/Bonnet Material: Trim Material: Seat Material: Stem / Body Seal Material: Bolting Material: Is valve considered Soft-Seated? Valve Markings Nameplate Information: Casting Markings: Assembly Drawing Number / Revision / Date of Issue: Assembly Drawing sent to Yarmouth: If valve is fitted with gearbox, state gearbox manufacturer, model number and mechanical advantage: If valve is non-symmetric, state direction of flow for test: For double-seated valves, state maximum allowable cavity pressure: Manufacturer s Contact Name /Date: N8C1-JJ-XX-B EM-P01 Yes N8C1-JJ-XX-B EM-P # TRUNION 3250 lbf FP BODY A105 BONNET 4130 F51 F51 with RAM 21 F51 with QPQ/Graphite B7 / 2H NO 8 N8C1-JJ-XX-B EM-P rev. 1 10/1/12 Yes Exeeco IW-7 No 5625 psi Bill Manzon 3/8/13
4 SLDDRW:Uncontrolled Current Copy as of 12/18/ of 1
5 Temperature verses Time Chart Temperature - C Average Cal Block 300 Average Flame Test Time - min:sec Page 5 of 16
6 Pressure verses Time Chart Test Pressure-psig Test Time - min:sec Page 6 of 16
7 Test Setup Prior to Burn
8 Test Valve During Burn
9 Fire Test Information Customer: Valvtechnologies Date: 3/8/2013 Product Code: 8 inch Class 1500 Trunnion Ball Valve Project Number: PN Fire Test Raw Data Time Pressure Water Cal. Cal. Avg. Bonnet Body Average (EST) (psig) Volume Block 1 Block 2 Cal Block Flame Flame Flame (mls) Temp-C Temp-C Temp-C Temp-C Temp-C Temp-C 16:07: :07: :07: :07: :08: :08: :08: :08: :09: :09: :09: :09: :10: :10: :10: :10: :11: :11: :11: :11: :12: :12: :12: :12: :13: :13: :13: :13: :14: :14: :14: :14: :15: Page 9 of 16
10 Fire Test Data - continued 16:15: :15: :15: :16: :16: :16: :16: :17: :17: :17: :17: :18: :18: :18: :18: :19: :19: :19: :19: :20: :20: :20: :20: :21: :21: :21: :21: :22: :22: :22: :22: :23: :23: :23: :23: :24: :24: :24: :24: :25: :25: :25: :25: Page 10 of 16
11 Fire Test Data - continued 16:26: :26: :26: :26: :27: :27: :27: :27: :28: :28: :28: :28: :29: :29: :29: :29: :30: :30: :30: :30: :31: :31: :31: :31: :32: :32: :32: :32: :33: :33: :33: :33: :34: :34: :34: :34: :35: :35: :35: :35: :36: :36: :36: Page 11 of 16
12 Fire Test Data - continued 16:36: :37: :37: :37: :37: :38: :38: :38: :38: :39: :39: :39: :39: :40: :40: :40: :40: :41: :41: :41: #REF! #REF! 16:41: #REF! #REF! 16:42: #REF! #REF! 16:42: #REF! #REF! 16:42: #REF! #REF! 16:42: #REF! #REF! 16:43: #REF! #REF! 16:43: #REF! #REF! 16:43: #REF! #REF! 16:43: #REF! #REF! 16:44: #REF! #REF! 16:44: #REF! #REF! 16:44: #REF! #REF! 16:44: #REF! #REF! 16:45: #REF! #REF! 16:45: #REF! #REF! 16:45: #REF! #REF! 16:45: #REF! #REF! 16:46: #REF! #REF! 16:46: #REF! #REF! 16:46: #REF! #REF! 16:46: #REF! #REF! 16:47: #REF! #REF! Page 12 of 16
13 Leakage Summary for Burn and Cool Down Periods All pressure transducers and thermocouples are in calibration per YRT's QA program. Seat leakages were collected manually. External leakage was collected electronically. Total Through Seat Leakage Collected Over 30 Minute Duration: 300 mls Average Leak Rate Over 30 Minute Duration: 10 ml/min Allowable Leak Rate: 3200 ml/min Total Through Seat Leakage Collected Over 10 Minute Cool Down: 150 mls Total Water Volume Lost Over 40 Minute Burn and Cool Down: 561 mls Water Collected in System Relief Valve: 150 mls Calculated External Leakage During 40 Minute Duration: -39 mls Average Leak Rate Over 40 Minute Duration: 0.0 ml/min Allowable Leak Rate: 800 ml/min Were the Valve Leakages Below the Allowables? Yes Page 13 of 16
14 Summary of Test Parameters During Burn and Cool Down Periods Note Amount of Time Pressure Dropped Below 50%: 0.0 minutes Maximum Allowable Low Pressure Time: 2.0 minutes Maximum Pressure During Burn/Cool Down: 2914 psig Average Pressure During Burn/Cool Down: 2719 psig Minimum Pressure During Burn/Cool Down: 2601 psig Amount of Time of Avg. Cal Block > 650 deg.c: 24.5 minutes Minimum Allowable Time at Temperature: 15.0 minutes Maximum Avg Cal Block Temperature: 745 deg. C Average Cal Block Temperature: 569 deg. C Lowest Avg Cal. Block Temperature: 43 deg. C Maximum Body Flame Temperature During Burn: 975 deg. C Average Body Flame Temperature During Burn: 868 deg. C Maximum Bonnet Flame Temperature During Burn: 901 deg. C Average Bonnet Flame Temperature During Burn: 850 deg. C Average of Both Flame Temperatures During Burn: 859 deg. C Were Test Conditions Within Compliance? Yes Page 14 of 16
15 Post-Burn Seat Test Information Customer: ValvTechnologies Date: 3/8/2013 Product Code: 8 inch Class 1500 Trunnion Ball Valve Project Number: PN This test not required for Pressure Class Page 15 of 16
16 Operational Test Information Customer: Valvtechnologies Date: 3/8/2013 Product Code: 8 inch Class 1500 Trunnion Ball Valve Project Number: PN Valve operated closed to open prior to readings Test Data Leakages were collected manually. Pressure Cal Block Time (psig) Temp - C 17:13: :13: :13: :13: :14: :14: :14: :14: :15: :15: :15: :15: :16: :16: :16: :16: :17: :17: :17: :17: :18: Total External Leakage Collected Over 5 Minute Duration: 0.0 mls Average Leak Rate Over 5 Minute Duration: 0.0 ml/min Allowable Leak Rate: 1600 ml/min Was the Valve Leakage Below the Allowable? Yes Page 16 of 16
Fire Test Report API Standard 607, 4th Edition
Fire Test Report API Standard 607, 4th Edition Performed for ValvTechnologies, Inc. www.valv.com 4 inch Class 300 Ball Valve Product Code: V5CC-RF-FP-B040-008ZZ Project Number: 210245 February 22, 2011
More informationFire Test Report ANSI/API Standard 607, 5 th Edition. ValvTechnologies, Inc.
Fire Test Report ANSI/API Standard 607, 5 th Edition Performed for ValvTechnologies, Inc. www.valv.com 2 inch Class 1500 Trunnion Ball Valve Valve Code: H8C2-JJ-FP-B020-004AA-P02 Project Number: 213204
More informationFire Test Report ANSI/API Standard 607, 5th Edition. ValvTechnologies, Inc. 8 inch Class 300 Ball Valve
Fire Test Report ANSI/API Standard 607, 5th Edition Performed for ValvTechnologies, Inc. www.valv.com 8 inch Class 300 Ball Valve Product Code: H5C2-RF-FP-B080-004AA-P02 Project Number: 213204 Test Date:
More informationANSI/API Standard 607 Sixth Edition 2010 ISO 10497: 2010 Fire Test Certificate
ANSI/API Standard 607 Sixth Edition 2010 ISO 10497: 2010 Fire Test Certificate Name of Manufacturer: ValvTechnologies, Inc. Test Date: 10/26/2010 Designation of Valve: Ball Valve NexTech Series Report/Certificate
More informationFugitive Emission Gasket Test Report
Fugitive Emission Gasket Test Report Chevron Fugitive Emission Test (CFET), March 2013 Performed for Environmental Gasket Co. www.environmentalgasket.com 6 inch Class 300 Fishbone Gasket Project Number:
More informationValves for Nuclear Power. Zero Leakage Valve Solutions
ValvTechnologies provides solutions for vent, drain, isolation and control applications in nuclear generation: ASME III Class 1, 2, and 3 Valves 10CFR50 Appendix B Safety Related Program ASME/ANSI Class
More informationVer Trunnion Ball Valve INSTALLATION, OPERATION AND MAINTENANCE MANUAL FBV/IOM/BA02
Ver. 2008 Trunnion Ball Valve INSTALLATION, OPERATION AND MAINTENANCE MANUAL FBV/IOM/BA02 TABLE OF CONTENTS 1 APPLICATIONS...2 1.1 Applications...2 1.2 Performance Specifications...2 2 APPLICABLE STANDARDS...2
More informationDate of Addendum Issue: Effective Addendum Date: Affected Publication: ADDENDUM 2
Date of Addendum Issue: August 2011 Effective Addendum Date: February 1, 2012 Affected Publication: API Specification 6D, Specification for Pipeline Valves, 23rd Edition, April 2009, Effective Date: October
More informationFIRE SAFE TEST CERTIFICATE ACCORDING TO : API 6FA Third Edition April Valve type: BALL VALVE SIDE ENTRY TRUNNION. Size 2 Class 2500 LBS
FIRE SAFE TEST CERTIFICATE ACCORDING TO : API 6FA Third Edition April 1999 Valve type: BALL VALVE SIDE ENTRY TRUNNION Size 2 Class 2500 LBS Material Stainless Steel Pag. 1 of 9 CONTENTS : 1. SCOPE. PAGE
More informationVELAN TRUNNION-MOUNTED
VELAN TRUNNION-MOUNTED Velan s standard trunnion-mounted ball valves offer increased value by incorporating advanced design features. TRUNNION-MOUNTED BALL The ball is fixed and the seat rings are floating,
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationValveworks USA Operation and Maintenance Booklet Model FC
Operation and Maintenance Booklet Model FC MODEL FC 3000, 5000, 10000, & 15000 W.P. FLOATING SLAB GATE VALVES 1 13/16-2 1/16-2 9/16-3 1/16-4 1/16 BOOKLET APPROVED BY: INTRODUCTION In appreciation to you
More informationTECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
More informationThe Participant will select one of the two Approval Categories (below) and submit the appropriate documentation.
FORM WCCL-PC3 WCCL TEST STAND APPROVAL PROCEDURE AND CHECKLIST AHRI CERTIFICATION PROGRAM FOR WATER-COOLED WATER CHILLING AND HEAT PUMP WATER-HEATING (WCCL) PACKAGES WCCL Participant: Date of Inspection:
More informationRAM Company USA Products Line
RAM Company USA Products Line Trunnion Mounted Ball Valves Metal Seated Ball Valve 3-Way Ball Valve Jacket Ball Valve Ball Valves with Actuator Trunnion Mounted Ball Valves Main Features DOUBLE PISTON
More informationD I S T R I B U T E D V A L V E S. Super G Lubricated-Non-Lubricated Plug Valve TEXSTEAM
Super G Lubricated-Non-Lubricated Plug Valve SUPER G EXCLUSIVE FEATURES Built and tested in accordance with API 6A, API 6D & B16. Lubricated and non-lubricated in same valve. Use it either way Metal-to
More informationBody Body Cap O-Ring Ball seat Packing Seat spring Cap Ball seat Retainer gland Packing Seat spring Ball Seat retainer Line pressure Ball Line pressure Cavity pressure Ball seat Seat retainer Cavity pressure
More informationEngineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
More informationTM SERIES Engineered Valves For Pipeline Service Application
Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationCalibration and Performance Check: Agilent Dual Plasma Controller
Calibration and Performance Check: Agilent Dual Plasma Controller Purpose Outline the steps used to calibrate and verify the performance of the Agilent Technologies Dual Plasma Controller. Scope This procedure
More informationA Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide 3 Piece Valves Triad Series Models FP/SP-2000/3000 / Valve Sizes: Model FP: 1/4 through 4 Model SP: 3/4
More informationWKM 320F. Flanged floating ball valves
WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5
More informationSOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES
CSTS SERIES Quality equates to the sum of Applied Science Serving the most rugged applications in the Western Canadian Sedimentary Basin Brochure CSTS Series February 2016 CSC Valves Canada Inc. operates
More informationSPECIFICATIONS FOR BLEEDER PLUGS USED IN WELLHEAD APPLICATIONS
SPECIFICATIONS FOR BLEEDER PLUGS USED IN WELLHEAD APPLICATIONS TECHNICAL REPORT TR0701 AWHEM publications may be used by anyone desiring to do so. Every effort has been made by the Association to assure
More informationModel descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
More informationElectric Flanged PN16 Cast Iron Ball Valve
Electric actuator direct mounted Type: E4813BS Electric actuator fitted via kit Main J3 Smart electric actuator features: LED light for continual visual actuator status feedback. Fully weatherproof smart
More informationA Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide PDF processed with CutePDF evaluation edition www.cutepdf.com 3 Piece Valves Triad Series Models FP/SP-2000/3000
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationMERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More informationV Series. Installation and Operations Maintenance Manual
V Series Installation and Operations Maintenance Manual Page 2 TABLE OF CONTENTS I. INTRODUCTION... 4 PRODUCT DESCRIPTION.... 4 PART NUMBERING SYSTEM.... 5-8 II. INSTALLATION RECEIVING & PREPARATION....
More informationCOMPANY PROFILE 0045
0045 COMPANY PROFILE INTRODUCTION TO THE COMPANY THE MICROFINISH WAY Microfinish Valves Pvt. Ltd. is a privately owned and managed company specializing in industrial valves for energy, process, and natural
More informationPRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured
PRODUCT OVERVIEW For over 30 years, FluoroSeal has been manufacturing and customizing a wide range of valves, and accessories for many industries including Oil & Gas, Petrochemical, Chemical, Mining, Pharmaceutical,
More informationWKM VALVES. Pow-R-Seal Gate Valves. REQUEST A QUOTE SCHEDULE SERVICES
WKM VALVES Pow-R-Seal Gate Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 562-529-8400 WWW.DKAMANS.COM TABLE OF CONTENTS WKM Pow-r-seal Gate Valves Introduction... 3 Design... 4 Operating Principles...
More informationNeedle Valves B
Subsea Needle Valves Description Detail MAWP Orifice CV Barrior Body Stem O-Ring Connection Actuator Length Width Height Hydrostatic Test Pressure Max Torque on Stem B-4957-01 Sub-Sea Needle Valve -way
More informationSide Entry Trunnion Mounted. Ball Valves. Floating
Side Entry Design: 2 or 3 pieces (Bolted Body or Fully Welded) Size/Class: - ANSI/ASME classes from 150 to 4500 - Sizes from ½ to 56 according to API 6D - API classes from 3000 to 15000 - Sizes up to 11
More informationLaboratory Gas Flow Model # VAC # VAC. Instruction Manual. Updated 11/18/2014 Ver. 1.16
Laboratory Gas Flow Model #120-57 - 115 VAC #120-57-1-230 VAC Instruction Manual Updated 11/18/2014 Ver. 1.16 OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. Houston, Texas 77065 U.S.A. Tele: 832.320.7300
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationNEECO INDUSTRIES INC. INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY
INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY INTRODUCTION The NF-700 type gate valves provided by Neeco Industries are full-bore through conduit non-rising stem manually (w/ball screw) operated valves.
More informationNC State University Design and Construction Guidelines Division 23 Energy Management
1.1 Purpose A. The following guidelines provide the methodology and requirements to assure that designs meet NC State standards for campus utility metering. 2.1 General Requirements A. Meters shall have
More informationFlanged End FloaF. Ideal Design for Process and Petrochemical Applications
Tech Bulletin Page 5- Flanged End FloaF loating Ball Valves Ideal Design for Process and Petrochemical Applications Size - 3 F FULL-FLO SERIES Models F50 Class 50 / F Class Full Port:/2" - 2" Standard
More informationKUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
More informationTY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
More informationV January 2016 SINGLE SEATED V5011 SERIES. Previously manufactured by Dezurik and Honeywell
V5011. January 2016 SINGLE SEATED V5011 SERIES Previously manufactured by Dezurik and Honeywell Description: 2 ½ to 6 class 5 with cast iron body, bronze trim and composite seat, ideally suited for low
More information9142-B-P-156/AF. User s Guide. Field Metrology Well. Distribution is limited to DoD and U.S. DoD contractors only.
9142-B-P-156/AF Field Metrology Well User s Guide Distribution is limited to DoD and U.S. DoD contractors only. May 2013 2013 Fluke Corporation. All rights reserved. Specifications are subject to change
More information9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST
9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in soft seat, high flow rate, pressure relieving
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationInstructions for installation, operation and maintenance of: GATE VALVE
Instructions for installation, operation and maintenance of: GATE VALVE GEN GAC GAF/GENF TERMOVENT SC Temerin Republic of Serbia Instruction for installation, operation and maintenance: Table of Contents
More informationBALL VALVES 4Evergreen Valve
BALL VALVES 4Evergreen Valve 4E represents Excellent quality, Excellent delivery, Excellent service and all at an Excellent price. 4E valve was founded by a group of enthusiastic people with more than
More informationWKM Model MB DynaCentric High Performance Butterfly Valve
Document Number: TC003001-10 Revision: Rev 1 WKM Model MB DynaCentric High Performance Butterfly Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS... 3 CATALOG NUMBER
More information[DRAFT VERSION] For use for company in Europe who will place the product on the market. Please amend which necessary. Document No:
Three-Piece ball valve EA-307 Series PED Category I, II EA-307 User Manual English Version [DRAFT VERSION] For use for company in Europe who will place the product on the market. Please amend which necessary.
More informationFull Opening Swing CHECK VALVE - API 6D
Full Opening Swing CHECK VALVE - API 6D Table of Contents: Manufacturing Range 3 Features & Benefits 4 Drawings 6 Sizes & Dimensions 8 Pressure / Temperature Reference 14 Flow Coefficients (Cv) 14 How
More informationDelivering innovation through engineering
Delivering innovation through engineering +44 1224 727480 Completions & Work-over Operations Bore Selector gives access to either the main production bore or annulus in a traditional vertical xmas tree,
More informationECOLINE GTF 800 Type Series Booklet
Gate Valve Class 800 NPS ½''-2'' Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationStart-up Experiences with Operation & Maintenance of Motor Operated Valves in a Delayed Coker
Start-up Experiences with Operation & Maintenance of Motor Operated Valves in a Delayed Coker Presented during the Coking.com Safety Seminar Houston, Texas USA April 18-21, 2005 Michael Fynan Staff Mechanical
More informationPBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
More informationREPORT NUMBER TR-P NC SAFETY COMPLIANCE TESTING FOR FMVSS 124 ACCELERATOR CONTROL SYSTEMS
REPORT NUMBER TR-P299-3-NC SAFETY COMPLIANCE TESTING FOR FMVSS 124 ACCELERATOR CONTROL SYSTEMS NISSAN MOTOR CORPORATION 29 NISSAN ROGUE 5-DOOR MPV NHTSA NUMBER: C95 PREPARED BY: KARCO ENGINEERING, LLC.
More information30 Years of Innovation
C-BV6 Ball Valves 30 Years of Innovation OMB is a family owned and managed business founded by Mr. Roberto Brevi in 1973. His goal was to build a company that would specialize in the manufacturing of forged
More information6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE
6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE DOCUMENT NO.: ES-1495 REVISION LEVEL: A ISSUED BY: Bill Hooks DATE: 09/25/13 APPROVED BY: DATE: APOLLO
More informationTrunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
More information1900 Series Universal Media. Best Under Pressure Series. Universal Media Pressure Relief Valve
Best Under Pressure 1900 Series Universal Media 1900 Series Universal Media Pressure Relief Valve Flexibility Performance Durability 2 Dresser Consolidated Handles liquid and vapor interchangeably without
More informationTABLE OF CONTENT
Page : 1 of 12 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES
More informationJ1000 and J2000. Installation & Operating Guide. IS66998 issc ECN 6884
Installation & Operating Guide J1000 J2000 IS66998 issc ECN 6884 Contents Description Page Safety 4 Installation Standards 4 Specifications 4 Installation and Setup 6 Dilution selection 9 IS66998 issc
More informationAPI 6A Gate Valves. an ARRAY Products Group company
API 6A Gate Valves valves for wellhead, manifold, distribution and fracture applications an ARRAY Products Group company TABLE OF CONTENTS Valve Trim Chart... 2 2,000 5,000 PSI Expanding or Slab Gate
More informationExpanding & Slab Gate Valves
Global Energy Market Solutions CAST / FORGED BODY Expanding & Slab Gate Valves For oil and natural gas wellhead, flowline, manifold, fracture or other critical service applications requiring operating
More informationAPPROVAL GUIDE CSA 3.16
APPROVAL GUIDE CSA 3.16 CONTENTS Approval Description 3 Basic Industrial Core Products 76 & 76F Series Certificates 89 Series Certificates 83B & 86B Series Certificates 87A & 88AB Series Certificates 215L/W
More informationTECHNICAL PAPER 1002 FT. WORTH, TEXAS REPORT X ORDER
I. REFERENCE: 1 30 [1] Snow Engineering Co. Drawing 80504 Sheet 21, Hydraulic Schematic [2] Snow Engineering Co. Drawing 60445, Sheet 21 Control Logic Flow Chart [3] Snow Engineering Co. Drawing 80577,
More informationFugitive Emissions Standards & Laboratory Test Methods for Valves
Fugitive Emissions Standards & Laboratory Test Methods for Valves By: Greg Johnson President, United Valve 50 Years in 50 Seconds 1964 Houston air pollution Measuring air pollution in 1974 1 50 Years in
More informationOPERATOR S MANUAL AND SALES AND ENGINEERING DATA
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING. INCLUDE MANUALS: AF044X-XX Air Motor (pn 97999-1466) & S-632 General
More informationFloating Ball Valve - Design Features
408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting
More informationInternational Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas
- International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 TM Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc.
More informationReport Number: G CRT-001A Model Number: Ionflow 50 Surface ARB Number: 1334
3933 US Route 11 Cortland, NY 13045 Telephone: +01 607 753 6711 Facsimile: +01 607 756 9891 www.intertek-etlsemko.com Order No. G100222377 28 January 2011 Revised 11 November 2011 Report Number: G100222377CRT-001A
More informationMV1. Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer. Cert. No License No. 6D-0840
MV1 Cert. No. 224939 License No. 6D-0840 0062 Malaysia s 1st API 6D Ball & Gate Valves & Actuators Manufacturer INTRODUCTION MIR VALVE Sdn. Bhd. (MIR VALVE) was incorporated on 27 December, 2006, obtained
More informationMounting and Operating Instructions EB 8135/8136 EN. Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil Type 3535 Three-way Valve with bellows seal and rod-type yoke (partial view) Mounting and Operating Instructions EB 8135/8136 EN Edition
More informationButterfly Valve. Product Training Presentation Danfoss Flomatic Corporation
Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug
More informationVerifiable and Zero Leakage Design. PosiWell Pte Ltd. No. 9A Joo Koon Crescent Singapore Registration No N. Innovation By Design
Verifiable and Zero Leakage Design PosiWell Pte Ltd Asia Pacific Regions Europe / USA Regions No. 9A Joo Koon Crescent Singapore 629023 Registration No. 201221185N Alfred Tan Leon Niessen PosiWell patented
More informationBALL VALVES AND ACTUATORS E-CATALOG
BALL VALVES AND ACTUATORS E-CATALOG CONTENTS INTRODUCTION 3 MODEL SYSTEM 3-5 FLOATING TYPE SOFT SEATED BALL VALVE 6-8 CAST STEEL TRUNNION MOUNTED BALL VALVE 8-10 FORGED STEEL TRUNNION MOUNTED BALL VALVE
More informationFIRE PUMP SYSTEMS. FIRE PUMP SINGAPORE PTE LTD No.8 Keng Chin Road #13-11 Cyan South Tower Singapore
FIRE PUMP SYSTEMS FIRE PUMP SINGAPORE PTE LTD No.8 Keng Chin Road #13-11 Cyan South Tower Singapore 258710 Phone +65 6515 5123 Fax +65 6515 5272 Saha +65 90998565 Shandong Facility ABOUT FIRE PUMP SINGAPORE
More informationPARALLEL SLIDE GATE VALVE AND ACTUATOR INSTALLATION, OPERATIONS MAINTENANCE MANUAL
Certified to O-9001 5904 Bingle oad Houston, X 77092 elephone: (713) 860-0400 ax: (713) 860-0499 ervice epartment mergency ager: 1-800-316-0649 VVCHOOG, C. G VV CO O, OO MC M age 1 of 54 able of Contents.
More informationFo ge Steel Floating Ball Valves
Fo ge Steel Floating Ball Valves 26 Design and Inspection Standard: Pressure-Temperature Ratings Shell Wall Thickness Face-to-face Dimensions End connection Dimensions Pressure Test Fire Safe Test Marking
More informationVMA Presentation Pressure Seal (MSS-SP-144) and ASME B Update Carlos E. Davila, PE March 2014
VMA Presentation Pressure Seal (MSS-SP-144) and ASME B16-2013 Update Carlos E. Davila, PE March 2014 CRANE FLUID HANDLING Fugitive Emissions Update EPA has been reducing the allowable fugitive emissions
More informationTRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type
TRUNNION MOUNTED BALL VALVES API 6D & API 6A Side_Entry Ball Valve SE type Stem Stem Seals Body / Closure Gasket Ball Seat Seat Seal Side_Entry Ball Valve SE type TECHNICAL DESCRIPTION Description: ON/OFF
More informationHigh Pressure 2-way 2 1/2-6 Globe Valves
Overview Datasheet High Pressure 2-way 2 1/2-6 Globe Valves Designed to work with either an electronic actuator with a 3/4-inch (20 mm) or 1-1/2-inch (40 mm) stroke, the two-way globe valves are available
More informationD I S T R I B U T E D V A L V E S. TBV Series 21/51 Cryogenic Diverter Ball Valve TBV
TM TBV Series 21/51 Cryogenic Diverter Ball Valve TBV Series 21/51 Cryogenic Diverter Ball Valve incorporates all features found in the 2100 and provides diverting capabilities for use where two or more
More informationAmendment 69 FR (20 December 2004) Section 5 Hydraulic brake hose, brake hose assemblies, and brake hose end fittings ESN270529
Vehicle Certification Agency 1 The Eastgate Office Centre Eastgate Road Bristol BS5 6XX United Kingdom Telephone: +44 (0) 117 951 5151 Fax: +44 (0) 117 952 4103 Email: enquiries@vca.gov.uk www.dft.gov.uk/vca/
More information700 Series Anti-corrosion Control Valves
7 Series Anticorrosion Control Valves Specification Data CH92 11/97 Split Body PTFE Lined Control Valves for Corrosive Applications Table of Contents Foreword.................................................................
More informationVALVES API 6A Compact Ball Valves
VALVES API 6A Compact Ball Valves Space and Weight Saving Zero Leakage and Superior Performance The Standard in Non-Standard Valve Production www.uscortec.com Compact Ball Valves CORTEC Compact Ball Valves
More informationTECHNICAL BULLETIN. Valbart TM Through conduit slab gate valve. Experience in Motion FCD VBENTB A4 - (9/16)
Valbart TM Through conduit slab gate valve TECHNICAL BULLETIN FCD VBENTB1013-01-A4 - (9/16) Experience in Motion Valbart Through Conduit Slab Gate Valve The Valbart TCSGV is a fabricated body through conduit
More informationForged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
More informationSECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
More informationSMITH VALVE. The Problem Solver. Y-Pattern Globe and Check Valve. The Highest Performing, Non-Rotating Stem, Full Port Globe Valve on the Market
SMITH VALVE Y-Pattern Globe and Check Valve The Problem Solver The Highest Performing, Non-Rotating Stem, Full Port Globe Valve on the Market SFV-NRY-2012 THE NEWDELL COMPANY SMITH VALVE Y-Pattern Globe
More informationInternational Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary
International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc. www.isvalve.com
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationTrack Drive Circuit - General System. Simplified Travel Circuit Diagrams: Neutral Controls Forward Travel Reverse Travel
Section 7.1 Track Drive Circuit - General System Simplified Travel Circuit Diagrams: Neutral Controls... 7.1.2 Forward Travel... 7.1.4 Reverse Travel... 7.1.5 General... 7.1.3 Track Drive Circuit: General...
More informationppbrae & MiniRAE 2000 Service Training Firmware v 1.25(rev B)
ppbrae & MiniRAE 2000 Service Training Firmware v 1.25(rev B) Training Agenda: Upgrades Explanation of Duty-Cycle Diagnostic Mode Getting into Programming Calibration Inside the MiniRAE 2000/ppbRAE Configuration
More informationCORRIGENDUM - II. Sr.No. Price Break Up ---- Rate For item No.-1 to item No.-19.
CORRIGENDUM - II No. 6000003469/M.E.03/ Dated : 28/03/2014 Ref: Tender Enquiry No. 6000003469/M.E.03/2235 data 18.12.2013 Against our above tender enquiry was published in the http://spmhoshangabad.spmcil.com
More informationQualification Testing of Meritec High Power Conformal Connector 107 position, short (.22 inch stack height) and tall (.33 inch stack height) versions
Qualification Testing of Meritec High Power Conformal Connector 107 position, short (.22 inch stack height) and tall (.33 inch stack height) versions Project 1256 Scope: Test 1 per EIA-364-23 - determine
More information