API 6A Gate Valves. an ARRAY Products Group company

Transcription

1 API 6A Gate Valves valves for wellhead, manifold, distribution and fracture applications an ARRAY Products Group company

2

3 TABLE OF CONTENTS Valve Trim Chart ,000 5,000 PSI Expanding or Slab Gate Valves ,000 15,000 PSI Slab Gate Valves ,000 15,000 PSI Slab Gate Valves with Ball Screw... 9 Configuration Options for Array Gate Valves ARRAY Products Group TABLE of Contents FOR ARRAY GATE VALVES

4 2 VALVE TRIM CHART FORGED STEEL BODIES CAST STEEL BODIES MATERIAL SERVICE CONDITION CLASS 1 DESCRIPTION MATERIAL 2 TEMP 3 MATERIAL 2 TEMP 3 GENERAL SERVICE AA standard TRIM AVAILABLE IN AVAILABLE IN non AISI 4130 API TEMP L Y ASTM A487 4C API TEMP L Y NON-SOUR SERVICE GENERAL SERVICE bb stainless TRIM AVAILABLE IN AVAILABLE IN slightly AISI 4130 API TEMP L Y ASTM A487 4C API TEMP L Y GENERAL SERVICE cc full STAINLESS AVAILABLE IN AVAILABLE IN moderately AISI 410 SS API TEMP L Y ASTM A217 CA-15 API TEMP P Y sour SERVICE DD-nl standard TRIM AVAILABLE IN AVAILABLE IN non AISI 4130 API TEMP L Y ASTM A487 4C API TEMP P Y sour SERVICE EE-0,5 stainless TRIM AVAILABLE IN AVAILABLE IN moderately AISI 4130 API TEMP L Y ASTM A487 4C API TEMP P Y sour SERVICE EE-1,5 stainless TRIM AVAILABLE IN AVAILABLE IN moderately AISI 4130 API TEMP L Y ASTM A487 4C API TEMP P Y SOUR SERVICE sour SERVICE EE-nl stainless TRIM AVAILABLE IN AVAILABLE IN moderately AISI 4130 API TEMP L Y ASTM A487 4C API TEMP P Y sour SERVICE FF-0,5 full STAINLESS AVAILABLE IN AVAILABLE IN highly AISI 410 SS API TEMP L Y ASTM A217 CA-15 API TEMP P Y sour SERVICE FF-1,5 full STAINLESS AVAILABLE IN AVAILABLE IN highly AISI 410 SS API TEMP L Y ASTM A217 CA-15 API TEMP P Y sour SERVICE FF-nl full STAINLESS AVAILABLE IN AVAILABLE IN highly AISI 410 SS API TEMP L Y ASTM A217 CA-15 API TEMP P Y Notes: This trim chart provides information on materials included in standard valves offered by Array. Special materials, trims and configurations are available upon customer request. 10,000 15,000 psi slab gate valves and gate valves with ball screw operators have unique trim charts. Please refer to their respective section of the brochure for details. 1. Materials for sour service to latest edition of NACE MR0175. Alternate materials are available for special material classes designated by API or project requirements. Explanation of suffixes for material classes DD, EE and FF: 0,5 = 0.5 psia maximum partial pressure of H 2 S. 1,5 = 1.5 psia maximum partial pressure of H 2 S. NL = no limit to H 2 S. API material class ZZ may be used when materials that have previously been used for sour service will not comply with current NACE MR0175/ISO standards.

5 3 BONNET EXPANDING BONNET 2 SEAL RING OR SLAB GATE 4 STEM 5 SEAT 4 AISI 4130 AISI 4130 AISI 4130 AISI 4130 AISI 1018/1020 nitrided nitrided nitrided AISI 410 SS AISI 410 SS AISI 4130 AISI 316 ss nitrided 17-4 HH1150 ss nitrided AISI 410 SS AISI 410 SS AISI 410 SS AISI 316 ss nitrided 17-4 HH1150 ss nitrided AISI 4130 AISI 4130 AISI 4130 AISI 4130 AISI 1018/1020 nitrided nitrided nitrided AISI 4130 AISI 316 SS AISI 410 SS 17-4 HH1150 SS AISI 410 SS nitrided N nitrided AISI 4130 AISI 316 SS AISI 410 SS AISI 410 SS/CRA AISI 410 SS nitrided N nitrided AISI 4130 AISI 316 SS AISI 410 SS AISI 410 SS/CRA AISI 410 SS nitrided N nitrided AISI 410 SS AISI 316 SS AISI 410 SS 17-4 PH SS AISI 410 SS nitrided N nitrided AISI 410 SS AISI 316 SS AISI 410 SS AISI 410 SS/CRA AISI 410 SS nitrided N nitrided AISI 410 SS AISI 316 SS AISI 410 SS AISI 410 SS/CRA AISI 410 SS nitrided N nitrided 2. Charpy impact test results provided as required by API temperature rating and material class. 3. API temperature ratings X and Y require working pressure of valve to be de-rated as per API 6A annex G. 4. Nitriding is standard on all gates and seat. Hardfacing with tungsten carbide, HF6 or other techniques are available.. 5. NACE MR Table A.27 limits 17-4 PH H1150 for 05 service only (<0.5% H2S), CRA impact tested (410SS, Nitonic 50 or Alloy 718) for 1.5% or NL service depending on temperature class

6 4 Handwheel Bearing Retainer Nut Thrust Bearings Bearing Lubrication Fitting Bonnet Packing Packing Retainer Packing Injection Fitting Bonnet Stem Bonnet Seal Ring Seat Valve Body Body Grease Fitting Seat Gate Guide Expanding Gate Assembly Array 2,000 5,000 psi expanding and slab gate valves are available with either cast or forged steel valve bodies and bonnets. They are used in a variety of wellhead and distribution applications.

7 5 2,000 5,000 PSI EXPANDING OR SLAB GATE VALVES G A E Valve bore Bore centerline to bottom of valve F F G Bore centerline to handwheel top Handwheel diameter THREADED VALVES J A E J Flange face to face WT Estimated weight N Number of turns to open valve SIZE Working (PSI) A E F G J WT N in mm in mm in mm in mm in mm lbs kgs , , , , G F A E FLANGED END VALVES J SIZE Working (PSI) A E F G J WT N in mm in mm in mm in mm in mm lbs kgs

8 6 Handwheel Stem Pin Stem Adapter Thrust Bearings PackingRetainer Bearing Cap Bearing Lubrication Fittings Stem Packing Bonnet Seal Ring Bonnet Stem Bonnet Seat/Body Bushing Seal Grease Fitting Slab Gate Valve Body Retainer Plate Seat Ring Body Bushing Array 10,000 15,000 psi slab gate valves come standard with forged steel valve bodies and bonnets. They are used in a variety of wellhead, distribution and manifold applications.

9 7 10,000 15,000 PSI SLAB GATE VALVES G F A E F G J Valve bore Bore centerline to bottom of valve Bore centerline to handwheel top Handwheel diameter Flange face to face A WT Estimated weight E N Number of turns to open valve J SIZE PRESS A E F G J WT N in mm in mm in mm in mm in mm lbs kgs , , , , , , , , , , STANDARD STANDARD FULL STAINLESS FULL STAINLESS WITH HARDFACING WITH HARDFACING API MATERIAL CLASS: EE-0,5 API MATERIAL CLASS: EE-NL API MATERIAL CLASS: FF-0,5 API MATERIAL CLASS: FF-NL COMPONENT MATERIAL MATERIAL MATERIAL MATERIAL BODY AISI 4130 AISI 4130 AISI 410 SS AISI 410 SS BONNET AISI 4130 AISI 4130 AISI 410 SS AISI 410 SS GATE AISI 410 SS NITRIDED AISI K HARDFACED AISI 410 SS NITRIDED AISI 410 SS HARDFACED SEAT RING AISI 410 SS NITRIDED SOLID STELLITE #6 (1) AISI 410 SS NITRIded solid STELLITE #6 (1) SEAT SEAL GTFE GTFE GTFE GTFE BODY BUSHING AISI 410 SS AISI 410 SS AISI 410 SS AISI 410 SS BODY BUSHING SEAL U-TYPE PTFE+FKm u-type PTFE+FKm u-type PTFE+FKm u-type PTFE+FKM STEM 17-4 PH HH1150 AISI 410/CRA 17-4 PH HH1150 AISI 410/CRA BONNET SEAL RING AISI 316 SS AISI 316 SS AISI 316 SS AISI 316 SS RETAINER PLATE AISI 316 OR 304 SS AISI 316 OR 304 SS AISI 316 OR 304 SS AISI 316 OR 304 SS studs b7m / L7m b7m / L7m b7m / L7m b7m / L7M NUTS 2HM 2HM 2HM 2HM (1) Stellite is a registered trademark of the Deloro Stellite Group (2) Inconel is a registered trademark of Special Metals Corporation

10 8 Handwheel Thrust Bearings Ball Screw Assembly Upper Stem Bonnet Packing Lubrication Fitting Slab Gate Upper Bonnet Bonnet Seal Ring Body Seat Lower Bonnet Lubrication Fitting Bonnet Packing Stem Protector /Stand Array 10,000 15,000 psi slab gate valves have ball screw operators to reduce the torque required to open or close the valve under pressure. They come standard with forged valve bodies and bonnets as well as hardfaced gates and seats for durability. These features make them well suited for well fracture applications.

11 9 10,000-15,000 psi SLAB Gate Valves WITH BALL SCREW G F A E F G J Valve bore Bore centerline to bottom of valve Bore centerline to handwheel top Handwheel diameter Flange face to face WT Estimated weight N Number of turns to open valve A E J SIZE PRESS A E F G J WT N in mm in mm in mm in mm in mm lbs kgs , , STANDARD STANDARD FULL STAINLESS FULL STAINLESS WITH INCONEL WITH INCONEL API MATERIAL CLASS: API MATERIAL CLASS: API MATERIAL CLASS: API MATERIAL CLASS: EE-0,5 EE-NL FF-0,5 FF-NL COMPONENT MATERIAL MATERIAL MATERIAL MATERIAL BODY AISI 4130 AISI 4130 AISI 410 SS AISI 410 SS BONNET AISI 4130 AISI 4130 AISI 410 SS AISI 410 SS GATE 17-4 HH NITRIDED 17-4 HH NITRIDED 17-4 HH NITRIDED 17-4 HH NITRIDED SEAT AISI 410 SS - NITRIDED AISI 410 SS - NITRIDED AISI 410 SS - NITRIDED AISI 410 SS - NITRIDED SEAT SEAl u-type PTFE+FKM & U-TYPE PTFE+FKM & U-TYPE PTFE+FKM & u-type PTFE+FKM & POLYPAK POLYPAK POLYPAK POLYPAK STEM UPPER & LOWER 17-4 PH HH1150 AISI 410/CRA 17-4 PH HH1150 AISI 410/CRA BONNET SEAL RING AISI 316 SS/AISI 410 SS AISI 316 SS/AISI 410 SS AISI 316 SS/AISI 410 SS AISI 316 SS/AISI 410 SS studs b7m / L7m b7m / L7m b7m / L7m b7m / L7M NUTS 2HM 2HM 2HM 2HM (1) Inconel is a registered trademark of Special Metals Corporation

12 10 Expanding Gate Available for 2,000 15,000 psi valves Slab Gate Available for 2,000 5,000 psi valves Slab Gate Available for 10,000 15,000 psi valves Cast Gate Valve Body Standard on 2,000-5,000 psi valves Not available for 10,000-15,000 psi valves Forged Gate Valve Body Standard on 10,000-15,000 psi valves Also available for 2,000-5,000 psi valves APH Hydraulic/Spring Return APHD Hydraulic/Double Acting APHW Hydraulic/Wirecutting/Spring Return APD Pneumatic Diaphragm APP Pneumatic Piston

13 11 API 6A gate valves from Array can be provided in a variety of configurations based on project requirements or customer preference. A general description of some of the major configuration options appears below. Please see trim chart for additional information. Slab Gate 10,000 15,000 psi valves Offered in Array s 10,000 and 15,000 psi slab gate valves, the parallel slab gate offers bi-directional sealing capabilities ideal for wellhead and manifold applications. Slab Gate 2,000 5,000 psi valves Offered in Array s 5,000 psi slab gate valves, the slab gate offers bi-directional sealing capabilities and is preferred by some end users. Expanding Gate 2,000 5,000 psi valves Offered in Array s 2,000 15,000 psi gate valves, the expanding gate is the most popular gate we offer because it allows for a positive seal between gate and both seats even at extremely low pressures. Cast Gate Valve Body 2,000 5,000 psi valves Offered in Array s 2,000 5,000 psi gate valves, the cast valve body is the most popular body we offer for 5,000 psi and below wellhead gate valves. It is very cost effective and offers extremely reliable service. Forged Gate Valve Body 2,000 15,000 psi valves Offered in Array s 2,000 15,000 psi gate valves, the forged valve body is standard on all 10,000 and 15,000 psi gate valves. Some end users also prefer a forged body for wellhead applications where pressures are 5,000 psi and below. Safety Valves Actuated Valves and Actuated Bonnets Array offers a complete line of hydraulic and pneumatic actuators. These can be delivered as complete actuated valve assemblies, as actuator and bonnet assemblies ready to mount on any manufacturer s valve or as gate valves prepared for actuators provided from any actuator manufacturer. For more information please see Array s API 6A & CONFIGURATION OPTIONS FOR ARRAY GATE VALVES 6D Actuation Brochure.

14 12 PRODUCTS wellhead thru midstream The ARRAY Products Group is a leading manufacturer and distributor of pressure, flow control, and automation equipment for oil and gas exploration, production, gathering and distribution systems that are marketed under the Array, Cactus Flow, Tulsa Valve and Sigma Valve brands. Products include wellheads, gate valves, actuators, chokes, plug valves, other flow control products, shut-off and bypass pig valves, check valves, ball valves, pressure relief valves and automation products. SERVICES design thru aftermarket As Original Equipment Manufacturers (OEM), the ARRAY Products Group has the background, technical expertise and resources to provide the support your team needs so you can stay focused on your objectives. Services provided are: Engineering support, custom design, and forensic analysis Custom manufacturing by E&S Manufacturing Services Repairs from frac valves to BOPs, troubleshooting, and maintenance Discover the ARRAY Products Group P R O D U C T S s e r v i c e s

15

16 YOUR VALVE PARTNER IN TODAY S COMPETITIVE ENERGY INDUSTRY Corporate Office: Morales Road, Houston, Texas Toll Free: Phone: Fax: GV-US_1013