ANSI/API Standard 607 Sixth Edition 2010 ISO 10497: 2010 Fire Test Certificate

Size: px

Start display at page:

Download "ANSI/API Standard 607 Sixth Edition 2010 ISO 10497: 2010 Fire Test Certificate"

Eustace Merritt
6 years ago
Views:

1 ANSI/API Standard 607 Sixth Edition 2010 ISO 10497: 2010 Fire Test Certificate Name of Manufacturer: ValvTechnologies, Inc. Test Date: 10/26/2010 Designation of Valve: Ball Valve NexTech Series Report/Certificate Number: A Size: 6 inch Pressure Rating: ANSI Class 900 Body Material: Carbon Steel A105N Seat Material: Metal Seat A182-F51 / Ram 21 Trim Material: Duplex A182-F51 Stem Seal / Body Seal: Graphite The above valve was tested in accordance with the above stated fire test procedure. All of the applicable test parameters were met and external and through leakage measurements were below the allowable limits. Other valves of the same construction in the Pressure Classes and Sizes listed below may also be qualified according to the requirements of the test specification, Section 7. Sizes Qualified: 6 inch, 8 inch, 10 inch, 12 inch Pressure Ranges Qualified: 900#, 1500# & PN 150, 260 This certificate refers to the above mentioned product. This is to certify that the test specimen provided is in conformity with the standard mentioned above. This certificate does not imply assessment of the production of the product. Laboratory Information Name: Yarmouth Research and Technology, LLC Address: 434 Walnut Hill Road North Yarmouth, ME USA Tester: Matthew Wasielewski, PE info@yarmouthresearch.com (207)

2 Fire Test Report ANSI/API Standard 607, Sixth Edition, 2010 ISO 10497:2010 Performed for Valvtechnologies, Inc. 6 inch Class 900 Ball Valve N7C1-RF-RP-B AA-001 Project Number: October 2010 Performed by YARMOUTH RESEARCH AND TECHNOLOGY, LLC 434 Walnut Hill Road North Yarmouth, ME USA (207) info@yarmouthresearch.com

3 Customer: Valvtechnologies, Inc. Date: 10/26/2010 Specification: ANSI/API Standard 607, Sixth Edition, 2010 ISO :2010 Product Description: 6 inch Class 900 Ball Valve Project Number: PN Comments: N7C1-RF-RP-B AA Yarmouth Engineer: Matthew J. Wasielewski, P.E. Equipment Confirmed to be in Calibration to NIST Standards: Yes Burn and Cool Down Test Burn Start Time: 15:40:00 Average Pressure During Burn: 1671 psig Seat Leak Rate During Burn: 0 ml/min Allowable Seat Leak Rate: 2400 ml/min External Leak Rate During Burn/Cool Down: 2.6 ml/min Allowable External Leak Rate: 600 ml/min Amount of Time of Avg. Cal. Blocks > 650 deg. C: 21.5 minutes Were Test Conditions Within Compliance? Yes Were the Valve Leakages Below the Allowables? Yes Operational Test Did Valve Unseat and Open Fully?: Yes Average Pressure During Test: 1640 psig External Leak Rate After Operating: 0 ml/min Allowable External Leak Rate: 150 ml/min Was the Leakage Below the Allowable? Yes s Valve Pass or Fail the Test Standard? PASS Witnesses Page 2 of 16

4 YARMOUTH RESEARCH AND TECHNOLOGY Fire Test Information Sheet Valve Manufacturer s Name: Valve Manufacturer s Address: Did valve meet all required hydrostatic, leakage and other production pressure tests? Valvtechnologies 5904 Bingle Road Houston, Texas Yes Valve Product Code: ASME B16.34 Valve Description Size: Pressure Rating: Pressure Rating at 100F: Type: Weight: Reduced or Full Bore: Body/Bonnet Material: Trim Material: Seat Material: Stem / Body Seal Material: Bolting Material: Is valve considered Soft-Seated? Valve Markings Nameplate Information: Casting Markings: Assembly Drawing Number / Revision / Date of Issue: Assembly Drawing sent to Yarmouth: If valve is fitted with gearbox, state gearbox manufacturer, model number and mechanical advantage: If valve is non-symmetric, state direction of flow for test: For double-seated valves, state maximum allowable cavity pressure: Manufacturer s Contact Name /Date: 6 ANSI 900# 2,220 psi Side Entry Trunnion Ball Valve 550 lb Reduced Bore: 4 SA105N/SA29 Gr SA182 Gr. F51 SA182 Gr. F51/RAM 21 SA182 Gr. F51/Boronized SA193 Gr. B7M/SA194 Gr. 2H NO Model # N7C1-RF-RP-B AA Revision 0 YES Rotork Gear box, Exeeco IW- 6R/420 W/ 24 Hand wheel MA: 132 Symmetric Jonathan Jones/ East Elm Street, Yarmouth, Maine USA

5 dwg (Uncontrolled Current Copy as of 10/29/2010) VALVTECHNOLOGIES

6 Temperature verses Time Chart Temperature - C 600 Cal. Block 1 Cal. Block 2 Bonnet Flame 400 Body Flame :00 02:30 05:00 07:30 10:00 12:30 15:00 17:30 20:00 22:30 25:00 27:30 30:00 32:30 35:00 37:30 40:00 Test Time - min:sec Page 5 of 16

7 Pressure verses Time Chart Test Pressure-psig :00 05:00 10:00 15:00 20:00 25:00 30:00 35:00 40:00 Test Time - min:sec Page 6 of 16

8 , LLC Valve Prior to Test

9 , LLC Valve During Burn.

10 Fire Test Information Customer: Valvtechnologies, Inc. Date: 10/26/2010 Product Code: 6 inch Class 900 Ball Valve Project Number: PN Fire Test Raw Data Pressure Water Cal. Cal. Cal. Avg. Bonnet Body Average Time (psig) Volume Block 1 Block 2 Block 3 Cal Block Flame Flame Flame (mls) Temp-C Temp-C Temp-C Temp-C Temp-C Temp-C Temp-C 15:40: :40: :40: :40: :41: :41: :41: :41: :42: :42: :42: :42: :43: :43: :43: :43: :44: :44: :44: :44: :45: :45: :45: :45: :46: :46: :46: :46: :47: :47: :47: :47: :48: Page 9 of 16

11 Fire Test Data - continued 15:48: :48: :48: :49: :49: :49: :49: :50: :50: :50: :50: :51: :51: :51: :51: :52: :52: :52: :52: :53: :53: :53: :53: :54: :54: :54: :54: :55: :55: :55: :55: :56: :56: :56: :56: :57: :57: :57: :57: :58: :58: :58: :58: Page 10 of 16

12 Fire Test Data - continued 15:59: :59: :59: :59: :00: :00: :00: :00: :01: :01: :01: :01: :02: :02: :02: :02: :03: :03: :03: :03: :04: :04: :04: :04: :05: :05: :05: :05: :06: :06: :06: :06: :07: :07: :07: :07: :08: :08: :08: :08: :09: :09: :09: Page 11 of 16

13 Fire Test Data - continued 16:09: :10: :10: :10: :10: :11: :11: :11: :11: :12: :12: :12: :12: :13: :13: :13: :13: :14: :14: :14: :14: :15: :15: :15: :15: :16: :16: :16: :16: :17: :17: :17: :17: :18: :18: :18: :18: :19: :19: :19: :19: :20: Page 12 of 16

14 Leakage Summary for Burn and Cool Down Periods All pressure transducers and thermocouples are in calibration per YRT's QA program. Seat leakages were collected manually. External leakage was collected electronically. Total Through Seat Leakage Collected Over 30 Minute Duration: 0 mls Average Leak Rate Over 30 Minute Duration: 0 ml/min Allowable Leak Rate: 2400 ml/min Total Through Seat Leakage Collected Over 10 Minute Cool Down: 0 mls Total Water Volume Lost Over 40 Minute Burn and Cool Down: 553 mls Water Collected in System Relief Valve: 450 mls Calculated External Leakage During 40 Minute Duration: 103 mls Average Leak Rate Over 40 Minute Duration: 2.6 ml/min Allowable Leak Rate: 600 ml/min Were the Valve Leakages Below the Allowables? Yes Page 13 of 16

15 Summary of Test Parameters During Burn and Cool Down Periods Note Amount of Time Pressure Dropped Below 50%: 0.0 minutes Maximum Allowable Low Pressure Time: 2.0 minutes Maximum Pressure During Burn/Cool Down: psig Average Pressure During Burn/Cool Down: psig Minimum Pressure During Burn/Cool Down: psig Amount of Time of Avg. Cal Block > 650 deg.c: 21.5 minutes Minimum Allowable Time at Temperature: 15.0 minutes Maximum Avg Cal Block Temperature: deg. C Average Cal Block Temperature: deg. C Lowest Avg Cal. Block Temperature: 22.8 deg. C Maximum Body Flame Temperature During Burn: deg. C Average Body Flame Temperature During Burn: deg. C Maximum Bonnet Flame Temperature During Burn: deg. C Average Bonnet Flame Temperature During Burn: deg. C Average of Both Flame Temperatures During Burn: deg. C Were Test Conditions Within Compliance? Yes Page 14 of 16

16 Post-Burn Seat Test Information Customer: Valvtechnologies, Inc. Date: 10/26/2010 Product Code: 6 inch Class 900 Ball Valve Project Number: PN This test not required for this pressure class valve. Page 15 of 16

17 Operational Test Information Customer: Valvtechnologies, Inc. Date: 10/26/2010 Product Code: 6 inch Class 900 Ball Valve Project Number: PN Test Data Leakages were collected manually. Pressure Cal Block Time (psig) Temp - C 16:29: :29: :30: :30: :30: :30: :31: :31: :31: :31: :32: :32: :32: :32: :33: :33: :33: :33: :34: :34: :34: Total External Leakage Collected Over 5 Minute Duration: 0 mls Average Leak Rate Over 5 Minute Duration: 0 ml/min Allowable Leak Rate: 150 ml/min Was the Valve Leakage Below the Allowable? Yes Page 16 of 16

Fire Test Report API Standard 607, 4th Edition

Fire Test Report API Standard 607, 4th Edition Performed for ValvTechnologies, Inc. www.valv.com 4 inch Class 300 Ball Valve Product Code: V5CC-RF-FP-B040-008ZZ Project Number: 210245 February 22, 2011