COUPLINGS Slip Clutches Adjustable & Fixed

Transcription

1 djustable & Fixed ompact - 2 to 10 in-lb Standard to 100 in-lb Low Backlash - 16 to 75 in-lb Low Backlash, High Torque in-lb Pneumatic - 12 to 75 in-lb Vertical, Thrust apable - 12 to 100 in-lb Torques to 500 In-lb in continuous applications Get torques to 750 in-lb, 50% more torque in any size in low or medium duty slip applications 30 million slip cycle life! Fixed torque to + 20%, tighter tolerances available Backlash: 6 for P, S, & V, 2 for series Temperature Range: -4 to 140 F Maximum RPM: 1,000 Shaft to Shaft Style or Pulley/Gear/Sprocket Style ustom clutches with non-standard bores, keyways, torques

2 ompact: djustable & Fixed JUSTBL TORQU FIX TORQU Shaft-Shaft Pulley Style Type Single Plate (in-lb) Min Bore Max Bore PS 16 PO 16 djustable mm PFS 16 PFO 16 Fixed mm Shaft-Shaft Pulley Style Type Multiplate (in-lb) Min Bore Max Bore SS 16 SO 16 djustable mm SFS 16 SFO 16 Fixed mm *Torque 50 RPM (50% higher torque possible for lower duty cycles. all for assistance.)

3 Standard: djustable & Fixed JUSTBL TORQU FIX TORQU Single Plate F G H Shaft-Shaft Pulley Style Type (in-lb) Min Bore Max Bore PS 20 PO 20 djustable " 10mm PFS 20 PFO 20 Fixed " 10mm PS 24 PO 24 djustable " 13mm PFS 24 PFO 24 Fixed " 13mm PS 32 PO 32 djustable mm 16mm PFS 32 PFO 32 Fixed mm 16mm PS 44 PO 44 djustable mm 16mm PFS 44 PFO 44 Fixed mm 16mm PS 48 PO 48 djustable " 1.000" PFS 48 PFO 48 Fixed " 1.000" Single Plate F G H Shaft-Shaft Pulley Style Type (in-lb) Min Bore Max Bore SS 20 SO 20 djustable " 10mm SFS 20 SFO 20 Fixed " 10mm SS 24 SO 24 djustable " 13mm SFS 24 SFO 24 Fixed " 13mm SS 32 SO32 djustable mm 16mm SFS 32 SFO 32 Fixed mm 16mm SS 44 SO 44 djustable mm 16mm SFS 44 SFO 44 Fixed mm 16mm SS 48 SO 48 djustable " 1.000" SFS 48 SFO 48 Fixed " 1.000" *Torque 50 RPM (50% higher torque possible for lower duty cycles. all for assistance.)

4 Low Backlash: djustable & Fixed Same Torque apacity in Smaller iameter than Standard JUSTBL TORQU FIX TORQU Shaft-Shaft Pulley Style Type (in-lb) Min Bore Max Bore S 16 O 16 djustable " 10mm FS 16 FO 16 Fixed " 10mm S 24 O 24 djustable " 10mm FS 24 FO 24 Fixed " 10mm S 32 O 32 djustable mm 16mm FS 32 FO 32 Fixed mm 16mm S 44 O 44 djustable mm 16mm FS 44 FO 44 Fixed mm 16mm S 52 O 52 djustable " 32mm *Torque 50 RPM (50% higher torque possible for lower duty cycles. all for assistance.)

5 Pneumatic: djustable Same Torque apacity in Smaller iameter than Standard JUSTBL TORQU (in-lb) Shaft- Pulley Shaft Style Type Rated* Max** Min Bore Max Bore S20 O20 djustable " 10mm S24 O24 djustable " 13mm S32 O32 djustable mm 16mm S44 O44 djustable mm 16mm *Torque 50 RPM (50% higher torque possible for lower duty cycles. all for assistance.) **Maximum torque (@ 100 psi) F G H J

6 Vertical, Thrust apable: djustable Same Torque apacity in Smaller iameter than Standard JUSTBL TORQU Shaft-Shaft Type (in-lb) Thrust Load B1 Min Bore B1 Max Bore VS20 djustable " 10mm VS24 djustable " 13mm VS32 djustable mm 16mm VS44 djustable mm 16mm VS48 djustable " 1.000" *Torque 50 RPM (50% higher torque possible for lower duty cycles. all for assistance.) **Maximum torque (@ 100 psi) L1 B2 L2 F G H

7 System, Shaft Penetration, Bore odes Shaft Penetration Specifications Minimum Maximum Type artridge Housing artridge Housing PS PFS PS PFS PS PFS PS PFS PS PFS PS PFS SS SFS SS SFS SFS SFS SS SFS SS SFS SS SFS Shaft Penetration Specifications Minimum Maximum Type artridge Housing artridge Housing S FS S FS S FS S FS S S S S S VS VS VS VS *artridge minimum penetration for fixed torque clutches depend on the torque setting. INTIFITION S S is the bore code (1/2 ) for the housing. See chart below for bore codes. 31 is the bore code (3/8 ) for the cartridge. See chart below for bore codes 24 is the outside diameter in sixteenths of an inch. Standard sizes are 16, 20, 24, 32, 44, 48, and 52. S is shaft to shaft. O is shaft to pulley or gear. Y is cartridge alone. is adjustable torque. F is factory preset torque. xample of gear mounted on slip clutch (We can supply gears + pulleys) Type of Slip lutch S = Multi-Plate P = Single-Plate = Low Backlash = Pneumatic V = Vertical, Thrust apable VILBL BORS Size INH +.002/-.000 MTRI +.05/-.0 1/4 5/16 3/8 1/2 5/8 3/4 7/ / O

8 Technical Notes General Ondrives.US control torque for intermittent, continuous or overload slip. The clutches will drive in both directions, slip when the torque setting is reached, and resume driving as the load is reduced. They are excellent as continuous drag brakes, protection against accidental or intentional overloads, for soft starts, slip at the end of a stroke, etc. Ondrives.US are precision devices containing 2 to 12 brass plates interfaced with a long life friction material. Soft springs maintain pressure on the friction plates, assuring constant torque. n adjacent part of your mechanism can often be used as the Slip lutch housing. Fixed torque clutches are available preset at the factory. apacity The clutch capacity is based on continuous operation at 50 RPM for over 30 million cycles. Torque, RPM, duty cycle and life are inter-dependent. reduction of any of these will allow an increase in any other. Running at 25 RPM will allow twice the torque, or running for only 10% of the cycle will allow higher RPM, etc. The limit is based on heat build up measured in watts per: = Torque (inch pounds) x RPM x x uty cycle % (uty cycle % = time in slip/total time) xample: n SS can dissipate 6 watts continuously. This translates to: Inch - lbs x RPM x % Slip x constant = % % % % all us with any questions about specifications and use

9 lutch Mounting Options