CATALOGUE Equipment and accessories for boating

Transcription

1 CATALOGUE 2018 Equipment and accessories for boating

2 barka s.r.l. Strada Padana Superiore, 256/ Vimodrone - Mi (Italy) Tel: Fax: General information: info@barka.it Commercial dept.: orders@barka.it Technical and support dept.: support@barka.it Accounting dept.: accounting@barka.it Graphic department: grafica@barka.it

3 INDEX Sinks & basins... 5 Single...6 Single squared...8 Double squared...9 Double...11 Cylindrical...15 Basins...16 Drains & wastes...17 Single...18 Double...19 Reduced size...19 Accessories and spare parts...20 Taps & showers...21 One handle mixers...22 Two handle mixers...28 Taps...29 Faucets...31 Tap shower control...31 Shower controls...32 Recessed container...34 Showers...35 Rails...36 Thermostatic mixers for showers...37 Straight shower handles...38 Elbow shower handles...39 Hoses...40 Bulkhead shower controls...42 Accessories and spare parts...43 Speedfit push-fit fittings...45 Fittings...49 Pedestals & chairs...53 Table pedestals...54 Chair pedestals...61 Chairs, plates, sliders and bases...66 Accessocies...68 Electirc struts...68 Double stage electric struts...83 Electric TV lifts...85 Igloo coolers...89 Teak Wonder...93 Water filters...95 Water witch electronic switches...97 Accumulators, water heaters, waste bin and ice maker...98

4 Welcome on board! Since 1966 BARKA operates successfully in the field of pleasure boating: from sale of sailboats, its main original activity, it has gradually specialized in the production and distribution of marine equipment and accessories. Headquartered in Milan, with a branch in Rome, a production unit in Bergamo and distributors abroad, during its 50 years activity it has established itself as one of the most serious, reliable and versatile realities in the industry, becoming a point of reference for supplies for major national and international shipyards and operators. Its strength is, first of all, the uniqueness of the articles of its production: the TEAK WONDER, product line which is internationally leader in the field of cleaning and care of the teak, and SUPPORTS and ELECTRIC STRUTS, sold around the world also in customized versions. Moreover, BARKA is distinguished by the high quality of marine products that distributes (faucets, sinks, fittings, pumps, filters, etc.), of which it can provide a range that will satisfy every need.

5 SINKS & BASINS

6 SINKS & BASINS PROFILE Inset flange "A" Inset flange "B" Under Surface flange "C" Inset flange "D" SINGLE STAINLESS STEEL SINK Mirror finish A B C D INSET Mirror finish INSET H H LI H 15 W2 HOLE cod LI H 15 W2 HOLE cod LI H 18 W2 HOLE cod Satin finish INSET LI H 20 W2 HOLE cod Satin finish INSET H H LI H 15 W2 HOLE cod LI H 20 W1 HOLE cod LI H 15 W2 HOLE cod LI H 20 W2 HOLE cod Mirror finish INSET Mirror finish INSET H H LI H 15 W2 HOLE cod LI H 20 W2 HOLE cod LI H 18 W2 HOLE cod Mirror finish Mirror finish INSET INSET H H LI H 18 W2 HOLE cod LI H 25 W2 HOLE cod

7 H Mirror finish PROFILE R BOTTOM RADIUS STANDARD DRAIN HOLE W1 INSET new STANDARD DRAIN HOLE The HOLE of the sinks is STANDARD, except where otherwise specified Mirror finish W2 3 1/2 - WD DRAIN HOLE W3 UNDER SURFACE SINKS & BASINS RR H H LI /R H 20 right W2 hole cod LI /L H 20 left W2 hole cod LI C H 15 W2 HOLE cod Mirror finish Satin finish UNDER SURFACE UNDER SURFACE H H LI C20 H 18 W2 HOLE cod LI /b-C H 18 W2 HOLE cod Mirror finish Satin finish UNDER SURFACE UNDER SURFACE R H H LI C/R H 20 left W2 hole cod LI C/L H 20 left W2 hole cod LI C/L H 20 W1 HOLE cod Satin finish UNDER SURFACE H LI C/FT H 20 W2 HOLE cod

8 SINKS & BASINS Satin finish waste drain not included UNDER SURFACE H 20 LI C/T/WD W3 HOLE cod SINGLE STAINLESS STEEL SQUARED SINK Satin finish waste drain not included FLAT Satin finish FLAT H 14 waste drain not included H 19,5 LI C/15T/WD W3 HOLE cod LI C/15T/WD W3 HOLE cod Satin finish waste drain not included FLAT Satin finish FLAT H 20 waste drain not included H 20 LI C/15T/WD W3 HOLE cod LI C/15T/WD W3 HOLE cod Satin finish waste drain not included FLAT Satin finish FLAT waste drain not included H 20 H 20 LI C/15T/WD W3 HOLE cod LI C/15T/WD W3 HOLE cod

9 DOUBLE STAINLESS STEEL SQUARED SINKS Satin finish waste drains not included FLAT SINKS & BASINS H 19,5 H 14 LV C/15T/WD W3 HOLES cod Satin finish waste drains not included FLAT H 20 H 14 LV C/15T/WD W3 HOLES cod Satin finish waste drains not included FLAT H 19,5 LV C/15T/WD W3 HOLES cod Satin finish waste drains not included FLAT H 20 LV C/15T/WD W3 HOLES cod

10 SINKS & BASINS Satin finish waste drains not included FLAT H 20 H 19,5 LV C/15T/WD W3 HOLES cod Satin finish waste drains not included FLAT H 20 LV C/15T/WD W3 HOLES cod Satin finish waste drains not included FLAT H 20 H 19,5 LV C/15T/WD W3 HOLES cod

11 DOUBLE STAINLESS STEEL SINK Mirror finish INSET H 15 SINKS & BASINS LV H 15 W2 HOLES cod Mirror finish INSET H LV H 15 W2 HOLES cod LV H 20 W2 HOLES cod Mirror finish INSET H LV H 15 W2 HOLES cod LV H 20 W1 HOLES cod Mirror finish INSET H LV H 15 W1 HOLES cod LV H 20 W2 HOLES cod

12 SINKS & BASINS Mirror finish INSET H 16 LV /R-D H 15 W1 HOLES cod Mirror finish INSET H 20 LV D H 20 W1 HOLES cod Mirror and satin finish UNDER SURFACE H LV C Mirror finish H 15 W2 HOLES cod LV /b-C Satin finish H 15 W2 HOLES cod Satin finish UNDER SURFACE H 15 LV C H 15 W2 HOLES cod

13 Mirror finish UNDER SURFACE H 20 SINKS & BASINS LV C H 20 W2 HOLES cod Satin or semi-gloss finish UNDER SURFACE H LV C Satin finish H 15 W2 HOLES cod LV C/T Semi-gloss finish H 15 W2 HOLES cod LV C Satin finish H 20 W1 HOLES cod Mirror or satin finish UNDER SURFACE H LV /L Mirror finish H 16 W2 HOLES cod LV /L Mirror finish H 20 W1 HOLES cod LV /b-L Satin finish H 20 W1 HOLES cod Mirror or satin finish UNDER SURFACE H LV /R Mirror finish H 16 W1 HOLES cod LV /b-R Satin finish H 16 W1 HOLES cod LV /R Mirror finish H 20 W1 and W2 HOLES cod LV /b-R Satin finish H 20 W1 HOLES cod

14 SINKS & BASINS Mirror or satin finish UNDER SURFACE H LV C Mirror finish H 20 W1 HOLES cod LV /b-C Satin finish H 20 W1 HOLES cod Mirror finish UNDER SURFACE H 20 LV H 20 W2 HOLES cod Satin finish UNDER SURFACE H 20 LV C H 20 W1 HOLES cod Mirror finish UNDER SURFACE H 20 LV H 20 W2 HOLES cod

15 CYLINDRICAL STAINLESS STEEL SINK DIAMETER 26 Mirror or brushed finish INSET H SINKS & BASINS LI CIL 26/SD Mirror finish H 18 W2 HOLE cod LI CIL 26/5sb Brushed finish H 12,5 W2 HOLE cod DIAMETER 30 Mirror or brushed finish INSET H LI CIL 30/SD Mirror finish H 18 W1 and W2 HOLES cod LI CIL 30/5L Mirror finish H 12,5 W1 HOLES cod LI CIL 30/5sb Brushed finish H 12,5 W1 HOLES cod DIAMETER 36 Mirror finish INSET H 18 LI CIL 36 Mirror finish H 18 W2 HOLE cod DIAMETER Mirror or brushed finish INSET LI CIL 41 LI CIL 42 H LI CIL 41 with fixing nuts Mirror finish H 20 W1 HOLE R 20 cod LI CIL 42 Mirror finish H 18 W2 HOLE R 30 cod LI CIL 42 sb-n with fixing nuts Brushed finish H 18 W1 HOLE R 30 cod

16 STANDARD DRAIN HOLE W1 SINKS & BASINS HEMISPHERICAL STAINLESS STEEL SINK BASINS DIAMETER Mirror or brushed finish LI SS 26 LI SS 30/SD LI SS 36 INSET H LI SS 26 Mirror finish H 12 W2 HOLE cod LI SS 26/5 sb Brushed finish H 12 W2 HOLE cod LI SS 30/SD Mirror finish H 15 W2 HOLE cod LISS 36 Mirror finish H 15 W2 HOLE cod Mirror or brushed finish W2 HOLE INSET Mirror finish INSET H 10 H 15 LI SS 20 Mirror finish cod LI SS 20/5 sb Brushed finish cod Mirror finish INSET LI OVAL 35 W1 HOLE cod Mirror finish INSET H 12,5 H 15 LI OVAL 36 W2 HOLE cod Mirror finish LI OVAL 38/1 W1 HOLE cod INSET H 15 LI OVAL 45 W2 HOLES cod Mirror finish LI OVAL 45/L W2 HOLES cod INSET H 15 LI GO 34 W2 HOLE cod

17 DRAINS & WASTES

18 PLASTIC SINGLE DRAINS All wastes are suited for our STANDARD W1 and W2 hole (page 9), unless otherwise specified Drain Drain with removable grid Drain, plug with handle DRAINS & WASTES PI 1235 cod Elbow drain PI 1235 gr cod Elbow drain with removable grid PI 1435 TM cod Elbow drain for shower trays PF 2535 cod PF 2535 gr cod PF 250 S cod Elbow drain - Only for W2 hole Drain - Only for W2 hole min. hole dia for basket: 57 mm min. recess for basket flange: 71 mm PF 3260 GP cod PI 1260 GP cod /2 WD drain - Only for W3 hole 3 1/2 WD elbow drain - Only for W3 hole min. hole dia for basket: 87 mm min. recess for basket flange: 115 mm PI 1290 GP cod PF 4090 GP cod

19 DOUBLE DRAINS DRAINS & WASTES PD 1235 gr/l cod DOUBLE DRAINS PD 1235/L cod PD 1235/20 cod PD 1235/32 cod PD 1235/25 cod P TM cod P Ø 40 mm cod P2 1235/20 Ø 20 mm cod P2 1235/32 Ø 32 mm cod P2 1235/25 Ø 25 mm cod REDUCED SIZE DRAINS FOR SPECIAL SMALL HOLES Ø 25 or Ø 30 PIST 20 cod PIST 20 F cod PIST 25 F cod PIEL 20 cod PIEL 20 F cod PIEL 25 F cod

20 ACCESSORIES AND SPARE PARTS Straight tube Elbow tube T connection DRAINS & WASTES PS 1432 cod PE 1432 cod PT 3232 cod Straight tube Elbow tube Straight tube PS 1240 cod T connection PE 1240 cod T connection PS 1240/LAVG cod Plug with handle PLGMX cod Plug PT 4040 cod PT 4040 S cod PLG 35 cod Straight hosetail Straight hosetail Adaptor Adaptor PG 1420 cod PG 1425 cod PA 1214 cod PA 1412 cod

21 MIXERS & FAUCETS

22 ONE HANDLE MIXERS Basin mixer with fixed spout Minimalistic basin mixer with fixed spout MIXERS & FAUCETS MC 1000 CHROME cod MC 1000 B with pop-up waste cod Minimalistic mixer with swivel spout MQ 1000 CHROME cod MQ 1000 B with pop-up waste cod Minimalistic mixer with swivel spout, chrome MQL 1100 CHROME cod Minimalistic mixer with swivel spout MQL 1100 B with pop-up waste cod Minimalistic mixer with swivel spout, chrome MQL 1500 CHROME cod Basin mixer with fixed spout, with aerator MQL 1500 B with pop-up waste cod Basin mixer with fixed spout, chrome MY 1600 CHROME cod MY 1000 cod MY 1000 B with pop-up waste cod

23 Basin mixer with fixed spout MY 1000 L-3/8 F CHROME cod Mixer with swivel spout, side handle Mixer with swivel spout MIXERS & FAUCETS MYL 1500 CHROME cod MX 1600 CHROME cod Mixer with swivel spout Mixer with swivel and pull-out spout MY /2 F CHROME cod MY /2 F CHROME cod Mixer with swivel, pull-out, adjustable flow shower Mixer with pull-out trigger shower MDY /2 F CHROME cod MDM CHROME cod

24 Basin mixer with fixed spout and aerator MIXERS & FAUCETS Mixer with swivel spout and aerator AERATOR MM 6000 CHROME cod MM 6010 WHITE cod Mixer with swivel spout and aerator MM 6700/20 CHROME cod MM 6700/15 CHROME cod Mixer with swivel spout and aerator MM 6750/20 SILVER cod Mixer with swivel spout, side handle MM 6700/25 CHROME cod Basin mixer with fixed spout ML 6500 CHROME cod Mixer with swivel spout and aerator MM 7000 CHROME cod MM 7001 with pop-up waste cod MM 7700 CHROME cod

25 Basin mixer with fixed spout Mixer with swivel spout MP 5000 CHROME cod Mixer with swivel spout, side handle MM 5400 CHROME cod Basin mixer with fixed spout MIXERS & FAUCETS ML 5500 CHROME cod Mixer with swivel spout MP 4000 CHROME cod Mixer with swivel spout, side handle MM 4400 CHROME cod Mixer with swivel spout, side handle ML 4500 CHROME cod Basin mixer with fixed spout ML 8800 CHROME cod MM 8000 CHROME cod

26 Mixer with swivel, pull-out, adjustable flow shower MIXERS & FAUCETS MD 7551 CHROME flex 1,5 m cod MD 7552 CHROME flex 2 m cod Mixer with pull-out, adjustable flow shower MD 6551 CHROME flex 1,5 m cod MD 6552 CHROME flex 2 m cod Mixer with pull-out, adjustable flow shower Mixer with swivel spout MD CHROME flex 1,5 m cod MD CHROME flex 2 m cod Mixer with swivel and fold down spout MM 4500 CHROME cod Mixer with swivel and fold down spout with aerator MA 4600 CHROME cod ML 1100 L CHROME cod

27 Mixer with swivel and fold down spout, with aerator Mixer with swivel and fold down spout with flow breaker ML 2100 L CHROME cod ML 2110 L WHITE cod Mixer with swivel and fold down spout with flow breaker ML 2100 CHROME cod ML 2160 BRUSHED CHROME cod Mixer with swivel and fold down spout with flow breaker MIXERS & FAUCETS ML 2500 CHROME cod ML 2560 BRUSHED CHROME cod Mixer with swivel and fold down spout with aerator ML 2600 CHROME cod Mixer with swivel and fold down spout with flow breaker MR 4100 L CHROME cod Mixer with swivel and fold down spout with flow breaker MR 4100 CHROME cod MR 4110 WHITE cod MR 4160 BRUSHED CHROME cod Mixer with swivel and fold down spout with flow breaker MR 4500 CHROME cod MR 4510 WHITE cod MR 4560 BRUSHED CHROME cod MR 4600 CHROME cod MR 4610 WHITE cod MR 4660 BRUSHED CHROME cod

28 TWO HANDLE MIXERS Swivel spout mixer with flow breaker Swivel spout mixer with flow breaker MIXERS & FAUCETS MG 3100 CHROME cod MG 3200 CHROME cod Swivel spout mixer with flow breaker Fixed spout basin mixer withflow breaker MG 3600 CHROME cod MF 3000 CHROME cod Swivel spout mixer with flow breaker MG 4500 CHROME cod Mixer with swivel, pull-out, adjustable flow shower Mixer with swivel, pull-out, adjustable flow shower MD 3111 flex 1,5m WHITE SHOWER cod MD 3911 flex 1,5m WHITE SHOWER cod MD 3141 flex 1,5m BLACK SHOWER cod MD 3941 flex 1,5m BLACK SHOWER cod MD 3112 flex 2m WHITE SHOWER cod MD 3912 flex 2m WHITE SHOWER cod MD 3142 flex 2m BLACK SHOWER cod MD 3942 flex 2m BLACK SHOWER cod

29 Mixer with swivel, pull-out, trigger shower Mixer with swivel, pull-out, trigger shower MD 3211 flex 1,5m WHITE SHOWER cod MD CHROME SHOWER cod MD 3241 flex 1,5m BLACK SHOWER cod MD WHITE SHOWER cod MD 3212 flex 2m WHITE SHOWER cod MD BLACK SHOWER cod MD 3242 flex 2m BLACK SHOWER cod MIXERS & FAUCETS Bridge mixer with swivel and folding spout, chrome MM 1500 cod MM 5500 cod MM 1600 cod TAPS Tap with swivel and fold down spout with flow breaker Tap with swivel and fold down spout RR 4100 CHROME cod RR 4110 WHITE cod RR 4160 BRUSHED CHROME cod Tap with swivel and fold down spout RR 4500 CHROME cod RR 4510 WHITE cod RR 4560 BRUSHED CHROME cod Tap with swivel, pull-out, trigger shower RR 4600 CHROME cod RR 4610 WHITE cod RR 4660 BRUSHED CHROME cod RD CHROME SHOWER cod

30 Tap with swivel, pull-out, trigger shower Tap with swivel, pull-out, trigger shower MIXERS & FAUCETS RD 4211 PL WHITE SHOWER cod Tap with swivel spout and flow breaker RD 4941 PL BLACK SHOWER cod RD 4911 PL WHITE SHOWER cod Tap with swivel spout and flow breaker RC 3100 CHROME cod RC 3200 CHROME cod Basin tap, fixed spout with flow breaker Deck wash tap RG 3000 RG 5000 RG 3000 CHROME cod RF 3000 CHROME cod Tap with fold down spout, chrome acrylic handle RG 5000 CHROME cod Tap with fold down spout, chrome triangular chr. pl. handle RM 1500 cod RM 1500 SX cod RM 5500 acrylic handle cod RM 5500 SX cod. 30

31 FAUCETS Faucet with swivel and fold down spout with flow breaker Faucet with swivel and fold down spout with flow breaker MIXERS & FAUCETS BR 0100 CHROME cod Faucet with swivel and fold down spout with flow breaker BR 0500 CHROME cod BR 0600 CHROME cod BR 0660 BRUSHED CHROME cod TAP SHOWER CONTROLS Tap for separate shower Tap for separate shower FLOW BREAKER RI 2000 CHROME cod RI 3000 CHROME cod

32 SHOWER CONTROLS Minimalistic mixer for separate shower Minimalistic mixer for separate shower MIXERS & FAUCETS MI CHROME cod Mixer for separate shower, over the counter outlet MI CHROME cod MI R12-1/2 F MI R38 MI R12-1/2 F CHROME cod MI R38 CHROME cod Mixer for separate shower, over the counter outlet MI 6000-NR12 MI 6000-NR38 MI 6000-NR12 CHROME cod MI 6000-NR38 CHROME cod Mixer for separate shower Mixer for separate shower MI 6000-N CHROME cod MI 7000-N CHROME cod

33 Mixer for separate shower Mixer for separate showers MI 2000/1 CHROME cod MI 2010 WHITE cod Minimalistic mixer for separate shower MI 3000 CHROME cod Mixer for separate shower MIXERS & FAUCETS ML 1000 CHROME cod Mixer for separate shower ML 2000 CHROME cod Tap for separate shower MR 4000 CHROME cod RR 4000 CHROME cod Bridge mixers for separate shower MM 1000 MM 3000 MM 5000 MM 1000 CHROME acrylic handles cod MM 3000 CHROME chrome plastic handles cod MM 5000 CHROME triangular chrome plastic handles cod

34 MIXERS & FAUCETS The first, flush-deck, more compact and unobstrusive recessed container for deck shower and mixer or tap Recessed mixer for shower Recessed tap for shower MR 2010 WHITE cod MR 2040 BLACK cod RR 3010 WHITE cod RR 3040 BLACK cod On-off push button shower with plastic hose, recessed container and cap DR 1513 WHITE 2 m hose cod DR 1543 BLACK 2 m hose cod DR 1514 WHITE 3 m hose cod DR 1544 BLACK 3 m hose cod DR 1515 WHITE 4 m hose cod DR 1545 BLACK 4 m hose cod

35 SHOWER Push button shower with grommet and hose Trigger shower with grommet and hose DS 1513 WHITE 2 m plastic hose cod DS 1543 BLACK 2 m plastic hose cod Trigger shower with grommet and hose DS 1003 CHROME 2 m plastic hose cod DS 1013 WHITE 2 m plastic hose cod DS 1043 BLACK 2 m plastic hose cod Elbow trigger shower with grommet and hose MIXERS & FAUCETS DS 0313 WHITE 2 m plastic hose cod DS 0343 BLACK 2 m plastic hose cod Adjustable flow, elbow shower with grommet and hose DS 0211 WHITE 1,5 m chrome flex cod DS 0241 BLACK 1,5 m chrome flex cod DS 0213 WHITE 2 m plastic hose cod Trigger shower with grommet and hose DS 0111 WHITE 1,5 m chrome flex cod DS 0141 BLACK 1,5 m chrome flex cod Adjustable flow, elbow shower with grommet and hose DS 1101 CHROME 1,5 m chrome flex cod DS 1113 WHITE 2 m plastic hose cod DS 1143 BLACK 2 m plastic hose cod Adjustable flow, elbow shower with grommet and hose DS 0911 WHITE 1,5 m chrome flex cod DS 0941 BLACK 1,5 m chrome flex cod DS 1201 CHROME 1,5 m chrome flex cod

36 RAILS Rail with sliding shower and chrome brass flex Rail with sliding 3 jets shower and chrome brass flex MIXERS & FAUCETS L 150 cm SS 1601 cod SX 1701 cod SS 0700 rail only for straight showers cod SX 0700 rail only for straight showers cod Squared rail with sliding shower and chrome plastic hose Rail with sliding shower and chrome brass flex L 150 cm FLEX L 150 cm TP 1512-C/00 SQ cod SQ 0700 rail only for straight showers cod SY 1801 cod SY 0700 rail only for straight showers cod

37 Rail with sliding shower and chrome brass flex L 150 cm MIXERS & FAUCETS SY 1801 B cod SY 0700 B rail only for straight showers cod THERMOSTATIC MIXERS FOR SHOWERS Thermostatic mixer, light type Thermostatic mixer, heavy type Optional PP9000 pair Optional PP9000 pair MT 9000 L cod Thermostatic mixer, vertical type MT 9000 H cod Pair of bulkhead extensions Standard (pair) MT 9000 V cod PP 9000 cod

38 STRAIGHT SHOWER HANDLES Trigger shower Trigger shower MIXERS & FAUCETS D 100 CHROME cod D 101 WHITE cod D 104 BLACK cod Heavy duty adjustable flow straight shower D 31 WHITE cod D 34 BLACK cod Heavy duty adjustable flow straight shower, short type D 55 CHROME cod D 51 WHITE cod Minimalistic adjustable flow straight shower D 130 CHROME cod Cockpit shower with on-off push button D 140 CHROME cod Straight shower with anti-scale D 150 CHROME cod D 151 WHITE cod D 154 BLACK cod Adjustable flow shower with anti-scale D 160 CHROME cod D 161 WHITE cod D 170 CHROME cod

39 Minimalist showers with anti-scale Squared shower D 180 D 180/B D 180 CHROME PLASTIC cod D 180/B CHROME BRASS cod ELBOW SHOWER HANDLES Trigger shower with elbow D 190 CHROME PLASTIC cod Trigger shower with elbow MIXERS & FAUCETS D 010 CHROME cod D 21 WHITE cod D 011 WHITE cod Trigger shower with elbow D 24 BLACK cod Adjustable flow elbow shower D 110 CHROME cod D 111 WHITE cod D 114 BLACK cod Adjustable flow elbow shower D 11 WHITE cod D 14 BLACK cod Adjustable flow elbow shower D 91 WHITE cod D 94 BLACK cod D 120 CHROME cod

40 HOSES Reinforced white plastic hoses 3/8 F 1/2 C MIXERS & FAUCETS 1/2 M FOR STRAIGHT SHOWER Reinforced white plastic hoses TP 1538-C/1 1,5 m cod TP 2038-C/1 2 m cod TP 2538-C/1 2,5 m cod TP 3038-C/1 3 m cod TP 4038-C/1 4 m cod Reinforced black plastic hoses 1/2 F 1/2 C 3/8 F 1/2 C TP 2038-C/4 2 m cod TP 2012-C/1 2 m cod TP 3012-C/1 3 m cod Plastic hoses with chrome spiral TP 3038-C/4 3 m cod TP 4038-C/4 4 m cod Plastic hoses with chrome spiral 1/2 F 1/2 C 3/8 F 1/2 C TP 1512-C/00 1,5 m cod TP 2012-C/00 2 m cod Heavy duty chrome brass hoses TP 1538-C/00 1,5 m cod TP 2038-C/00 2 m cod TP 3038-C/00 3 m cod TP 4038-C/00 4 m cod Heavy duty chrome brass hoses 1/2 F 1/2 C 3/8 F 1/2 C TC 1512-C/2 1,5 m cod TC 2012-C/2 2 m cod TC 1538-C/2 1,5 m cod TC 2038-C/2 2 m cod

41 Chrome brass hoses 15/1 M 3/8 F FOR ELBOW SHOWER Reinforced white plastic hoses 15/1 F TC ,5 m cod TC m cod TC 1538/2 1,5 m heavy duty cod TC 2038/2 2 m heavy duty cod MIXERS & FAUCETS 3/8 F 15/1 M TP 1538/1 1,5 m cod TP 2038/1 2 m cod TP 3038/1 3 m cod TP 4038/1 4 m cod Reinforced black plastic hoses FOR PULL-OUT SHOWER MIXERS Heavy duty Chrome brass hoses 3/8 F 15/1 M 15/1 M 1/2 C TP 1538/4 1,5 m cod TP 2038/4 2 m cod TP 3038/4 3 m cod TP 4038/4 4 m cod Plastic hoses with chrome spiral TC 1538-M 1,5 m cod TC 2038-M 2 m cod Reinforced plastic hoses, grey 3/8 F 15/1 M 15/1 M 1/2 C TP ,5 m cod TP m cod TP m cod TP m cod TP 1538-M 1,5 m cod TP 2038-M 2 m cod

42 BULKHEAD SHOWER CONTROLS Shower mixer for inset mounting Minimalistic shower mixer for inset mounting MIXERS & FAUCETS MCDI 1000 CHROME cod Shower mixer for bulkead mounting MQDI 1000 CHROME cod Shower mixer for bulkead mounting MDI 6000 CHROME cod Shower mixer for bulkead mounting MDI 6000-N CHROME cod Shower mixer for bulkead mounting MDI 5000 MDI 1000 CHROME cod MDI 1000-N without chrome plate cod Shower mixer for inset mounting MDI 4000 MDI 5000 CHROME cod MDI 4000 cod Shower mixer for inset mounting MDI 7000 CHROME cod MDI 8000 CHROME cod

43 ACCESSORIES Soap holder for rails Grommet for showers SX PSO CHROME PLASTIC cod Bulkhead holder for elbow shower S 10 for elbow showers cod S 30 for straight showers cod Bulkhead holder for straight shower MIXERS & FAUCETS SD 0100 CHROME ZAMAK cod Bulkhead holder for straight shower, fixed SD 0700 CHROME BRASS cod Bulkhead holder for straight shower SF 0700 CHROME PLASTIC cod SP 0700 CHROME PLASTIC cod Squared elbow bulkhead water connection Elbow bulkhead water connection BG 0038 BG 0012 BG 0038 thread 3/8 M cod BGQ 0012 CHROME BRASS cod BG 0012 thread 3/8 x 1/2 M cod

44 Recessed cup Cap for recessed cup MIXERS & FAUCETS R 81 WHITE for D150/D151/RR3010 cod R 81/1 WHITE for MR 2010 cod R 84 BLACK for D150/D154/RR3040 cod R 84/1 BLACK for MR 2040 cod C 81 WHITE for R 81 and R 81/1 cod C 84 BLACK for R 84 and R 84/1 cod Water saver valve RSMF 12 CHROME cod Water supply flexibles for mixers 8/1 3/8 M BSP 8/1 1/2 F BSP R 84/1 10/1 cod /8 M BSP 10/1 1/2 F BSP FLX B 8X1M - 3/8 M BLUE cod FLX R 8X1M - 3/8 M RED cod FLX B 8X1M - 1/2 F BLUE cod FLX R 8X1M - 1/2 F RED cod FLX B 10X1M - 3/8 M BLUE cod FLX R 10X1M - 3/8 M RED cod FLX B 10X1M - 1/2 F BLUE cod FLX R 10X1M - 1/2 F RED cod

45 SPEEDFIT Push-fit Fittings

46 SPEEDFIT Item Ø hose Ø stem thread code Straight connector SPEEDFIT Push-fit Fittings Elbow connector T connector PM 0412 E 12 cod PEM 0415 W 15 cod PEM 0422 W 22 cod PM 0312 E 12 cod PEM 0315 W 15 cod PEM 0322 W 22 cod PM 0212 E 12 cod PEM 0215 W 15 cod PEM 0222 W 22 cod Y connector CM 2312 W 12 cod Male adaptor Female adaptor Bulkhead connector PM E 12 3/8 M cod PM E 12 1/2 M cod CM S 15 1/2 M cod PM E 15 3/4 M cod CM S 22 3/4 M cod CM FS 12 3/8 F cod CM FS 12 1/2 F cod CM FS 15 3/8 F cod CM 3201 S 15 1/2 F cod PEM 3203 W 15 3/4 F cod PSE 3202 W 22 3/4 F cod PM 1212 E 12 cod Shut-off valve 15 ESOT 15 cod Service valve 15 ISV 15 cod

47 Stem adaptor Female stem adaptor, brass Stem ebow Item Ø hose Ø stem thread code PM E 12 3/8 M cod PM E 12 1/2 M cod PM E 15 3/8 M cod PM E 15 1/2 M cod PM E 22 1/2 M cod PM E 22 3/4 M cod MMM N 15 1/2 F cod PM E cod PEM W cod PEM W cod SPEEDFIT Push-fit Fittings Threaded stem elbow (brass nut) RM /8 M cod PEM BTC /2 F cod Straight reducer Reducer elbow PM E 12 x 8 cod PM E 12 x 10 cod CM S 15 x 10 cod PKM W 15 x 12 cod PM E 12 x 8 cod PM E 12 x 10 cod Reducer Barb connector PPM W cod PEM W cod NC /2 cod NC /4 cod End stop PSE 4612 W 12 cod PSE 4615 W 15 cod PSE 4622 W 22 cod

48 Item Ø hose Ø stem thread code SPEEDFIT Push-fit Fittings Plug Locking clip (red, blue or white) Collet cover (red or blue) Tank connector PM 0812 R 12 cod PL cod PL cod PKM 1812-R 12 cod PKM 1815-B 15 cod PKM 1822-W 22 cod PM 1912-R 12 cod PM 1912-B 12 cod CM 0715 S 15 cod CM 0722 S 22 cod Flexible hose for water heaters Flexible hose for mixers Item Ø hose thread code FLX /2 F cod Item Ø hose thread code NFLX x 1 M cod Mounting clip Item Ø hose code CLP barre da 10 pezzi cod CLP barre da 8 pezzi cod Tube cutter up to 12 mm dia Tube cutter up to 25 mm dia STCUT 12 cod ROCUT 26 cod Food grade pipes Item Ø code PTL 1210 T clear 12 x 10 cold only - coil 100 m cod PTL 1209 B blue 12 x 9 hot / cold - spool 100 m cod PTL 1209 R red 12 x 9 hot / cold - spool 100 m cod PTL 1511 B blue 15 x 11,5 hot / cold - coil 100 m cod PTL 1511 R red 15 x 11,5 hot / cold - coil 100 m cod PTL 2218 white 22 x 18 hot / cold - coil 50 m cod

49 FITTINGS

50 FITTINGS Female hosetail in polypropylene Nipple in polypropylene FITTINGS PG /8 x 12 cod PG /2 x 13 cod PG /2 x 16 cod PG /4 x 16 cod PG /4 x 20 cod PG /4 x 25 cod Male hosetail in polypropylene NIP 38 3/8 x 3/8 cod NIP 12 1/2 x 1/2 cod NIP 34 3/4 x 3/4 cod Reduced nipple in polypropylene NIP /8 x 1/2 cod NIP /2 x 3/4 cod Female socket in polypropylene PM /8 x 12 cod PM /8 x 13 cod PM /8 x 16 cod PM /2 x 13 cod PM /2 x 16 cod PM /2 x 20 cod PM /4 x 13 cod PM /4 x 16 cod PM /4 x 20 cod Female elbow hosetail in polypropylene MAF 38 3/8 x 3/8 cod MAF 12 1/2 x 1/2 cod MAF 34 3/4 x 3/4 cod T female connection in polypropylene TIF 38 3/8 x 3/8 x 3/8 cod TIF 12 1/2 x 1/2 x 1/2 cod TIF 34 3/4 x 3/4 x 3/4 cod Female elbow in polypropylene PGE /2 x 12 cod PGE /4 x 16 cod Male elbow hosetail in polypropylene GOF 38 3/8 x 3/8 cod GOF 12 1/2 x 1/2 cod GOF 34 3/4 x 3/4 cod GOF 10 1 x 1 cod Male/female elbow in polypropylene PEM /8 x 12 cod PEM /2 x 13 cod PEM /2 x 16 cod PEM /2 x 20 cod PEM /4 x 12 cod GMF 12 1/2 M x 1/2 F cod GMF 34 3/4 M x 3/4 F cod

51 Y connection in polypropylene T connection in polypropylene PY 10 Ø 10 cod PY 12 Ø 12 cod PY 14 Ø 14 cod PY 16 Ø 16 cod SKIN FITTINGS In white polypropylene PT 10 Ø 10 cod PT 12 Ø 12 cod PT 14 Ø 14 cod PT 16 Ø 16 cod PT 18 Ø 18 cod PT 20 Ø 20 cod PT 22 Ø 22 cod PT 25 Ø 25 cod FITTINGS Item A B C D E Code SM cod SM cod SM cod SM cod SM cod SM 15-NRV* cod *WITH NON RETURN VALVE BRASS FITTINGS Manifolds with red or blue taps Yellow manifolds 1/2 F 1/2 M 3/4 M 3/4 F 3/4 M 3/4 F 3/4 F 3/4 M 3/4 F 3/4 M 1/2 M 1/2 M COLT 122 M-B 2 x 1/2 M cod COLT 122 M-R 2 x 1/2 M cod COLT 123 M-B 3 x 1/2 M cod COLT 123 M-R 3 x 1/2 M cod COLT 124 M-B 4 x 1/2 M cod COLT 124 M-R 4 x 1/2 M cod COL 122 F 2 x 1/2 F cod COL 123 F 3 x 1/2 F cod COL 124 F 4 x 1/2 F cod COL 122 M 4 x 1/2 M cod COL 123 M 4 x 1/2 M cod COL 124 M 4 x 1/2 M cod

52 Yellow hosetail Nipple PGB /8 x 12 cod PGB /8 x 14 cod Yellow F/F coupling NIB 38 3/8 cod NIB 12 1/2 cod NIB 34 3/4 cod Reduced nipple FITTINGS MAB 38 3/8 cod MAB 12 1/2 cod MAB 34 3/4 cod MAB 10 1 cod Yellow F/F elbow NIB /2 x 3/8 cod NIB /4 x 1/2 cod NIB x 3/4 cod Reduced M/F socket nichel plated GOB 38 3/8 cod GOB 12 1/2 cod GOB 34 3/4 cod Yellow M/F elbow MABFM /2 F x 3/8 M cod MABFM /4 F x 1/2 M cod Reduced F/F socket nichel plated GOB MF 38 3/8 cod GOB MF 12 1/2 cod T female connection MAB /2 x 3/8 cod MAB /4 x 1/2 cod M/F reduction RIBMF /2 x 3/8 cod RIBMF /4 x 1/2 cod Ring TIB 38 3/8 cod TIB 12 1/2 cod TIB 34 3/4 cod TIB 10 1 cod GHB /2 M x 3/8 F cod

53 TABLE PEDESTALS & CHAIRS PEDESTALS

54 ELECTRIC TELESCOPIC TABLE PEDESTALS TWO STAGES Polished and brightened aluminium Polished and brightened aluminium TABLE PEDESTALS 18898/12 12 Volt cod /24 24 Volt cod Polished and brightened aluminium 18898/G/12 12 Volt cod /G/24 24 Volt cod Polished and brightened aluminium 18998/35/30/12 12 Volt cod /40/30/12 12 Volt cod /35/30/24 24 Volt cod /40/30/24 24 Volt cod Anodized aluminium ADJUSTABLE LOWER BASE 12398/12 12 Volt cod /24 24 Volt cod Anodized aluminium Anodized aluminium 12398/35/12 12 Volt cod /40/12 12 Volt cod /35/24 24 Volt cod /40/24 24 Volt cod

55 SWIVEL TOP CAUTION! DO NOT PRESSURE WASH ELECTRIC PEDESTALS. Pedestals must NOT be subjected to water pressure because they may experience water intrusion and subsequent failure. Pressure washing will invalidate the warranty for those products. Electric pedestal with table support with extensions Ø 94 Ø x TABLE PEDESTALS Ø HT cod Plished and brightened aluminium - MULTIPLE LEGS E18899/12 12 Volt cod E18899/24 24 Volt cod E188983/12 12 Volt cod E188983/24 24 Volt cod E188984/12 12 Volt cod E188984/24 24 Volt cod

56 ELECTRIC TELESCOPIC TABLE PEDESTALS ONE STAGE Polished and brightened aluminium Polished and brightened aluminium TABLE PEDESTALS 18198/12 12 Volt cod /24 24 Volt cod Anodized aluminium 18398/12 12 Volt cod /24 24 Volt cod Anodized aluminium 12197/12 12 Volt cod /24 24 Volt cod Anodized aluminium 12197/G/12 12 Volt cod /G/24 24 Volt cod Anodized aluminium 12297/35/12 12 Volt cod /35/G/12 12 Volt cod /35/24 24 Volt cod /35/G/24 24 Volt cod Anodized aluminium Anodized aluminium 12297/40/12 12 Volt cod /40/24 24 Volt cod /40/G/12 12 Volt cod /40/G/24 24 Volt cod

57 Anodized aluminium Anodized aluminium TABLE PEDESTALS 12198/12 12 Volt cod /12 12 Volt cod /24 24 Volt cod /24 24 Volt cod Anodized aluminium Anodized aluminium 12298/35/12 12 Volt cod /40/12 12 Volt cod /35/24 24 Volt cod /40/24 24 Volt cod Anodized aluminium Anodized aluminium 12299/35/12 12 Volt cod /40/12 12 Volt cod /35/24 24 Volt cod /40/24 24 Volt cod

58 FLUSH ELECTRIC TABLE PEDESTALS One stage, polished and brightened aluminium One stage, polished and brightened aluminium TABLE PEDESTALS 18191/65/12 12 Volt cod /65/24 24 Volt cod /70/12 12 Volt cod /70/24 24 Volt cod One stage, polished and brightened aluminium Two stages, polished and brightened aluminium 19697/12 12 Volt cod /24 24 Volt cod Two stages, polished and brightened aluminium 18697/12 12 Volt cod /24 24 Volt cod GAS POWERED TELESCOPIC TABLE PEDESTALS 18697/G/12 12 Volt cod /G/24 24 Volt cod Anodized aluminium Anodized aluminium 12197/F cod /R cod

59 Anodized aluminium Anodized aluminium cod Anodized aluminium 10103/F/30 cod Anodized aluminium TABLE PEDESTALS 10101/F/30 cod /F/35 cod /R/35 cod /R/40 cod Anodized aluminium Anodized aluminium 10103/R/35 cod /R/40 cod /A cod Anodized aluminium Anodized aluminium 10101/A/30 cod /A/35 cod

60 Anodized aluminium Anodized aluminium TABLE PEDESTALS 10199/30 cod /35 cod MANUAL TELESCOPIC TABLE PEDESTALS Anodized aluminium 10298/30 cod /35 cod Anodized aluminium 10199/M/30 cod /M/35 cod Anodized aluminium Anodized aluminium cod complete with bases cod POST SYSTEM Anodized aluminium Anodized aluminium complete with two bases cod complete with bases cod

61 Anodized aluminium Anodized aluminium complete with bases cod /74 without bases cod complete with bases cod /70 without bases cod CHAIRS PEDESTALS ELECTRIC TELESCOPIC CHAIR PEDESTALS Brushed and brightened aluminium CAUTION! DO NOT PRESSURE WASH ELECTRIC PEDESTALS. Pedestals must NOT be subjected to water pressure because they may experience water intrusion and subsequent failure /12 12 Volt cod /24 24 Volt cod Anodized aluminium Pressure washing will invalidate the warranty for those products. Anodized aluminium 13100/12 12 Volt cod /24 24 Volt cod /12 12 Volt cod /24 24 Volt cod Anodized aluminium Anodized aluminium 13099/12 12 Volt cod /24 24 Volt cod /R/12 12 Volt cod /R/24 24 Volt cod

62 A B C D CHAIRS PEDESTALS TELESCOPIC ONE HANDLE MANUAL CHAIR PEDESTAL, SWIVEL TOP Anodized aluminium 10800/ /A 10800/B 10800/C 10800/D 10800/32 without plate or slide cod /A with universal plate cod /B with plate suitable for our chairs cod /C with universal slide cod /D with slide suitable for our chairs cod Anodized aluminium 10895/ /A 10895/B 10895/C 10895/D 10895/32 without plate or slide cod /A with universal plate cod /B with plate suitable for our chairs cod /C with universal slide cod /D with slide suitable for our chairs cod Anodized aluminium 10700/ /A 10700/B 10700/C 10700/37 without base and without plate or slide cod /A with universal plate cod /B with plate suitable for our chairs cod /C with universal slide cod /D with slide suitable for our chairs cod /D 62

63 A B C D TWO HANDLES, MANUAL TELESCOPIC CHAIR PEDESTAL, SWIVEL TOP Anodized aluminium CHAIRS PEDESTALS 10600/ /A 10600/B 10600/C 10600/D 10600/30 without plate or slide cod /A with universal plate cod /B with plate suitable for our chairs cod /C with universal slide cod /D with slide suitable for our chairs cod Anodized aluminium 10609/ /A 10609/B 10609/C 10609/D 10609/30 without plate or slide cod /A with universal plate cod /B with plate suitable for our chairs cod /C with universal slide cod /D with slide suitable for our chairs cod Anodized aluminium 10510/ /A 10510/B 10510/C 10510/D 10510/30 without plate or slide cod /A with universal plate cod /B with plate suitable for our chairs cod /C with universal slide cod /D with slide suitable for our chairs cod

64 A B C D CHAIRS PEDESTALS GAS POWERED, SOFT RIDE, TELESCOPIC CHAIR PEDESTALS Anodized aluminium 10906/ /A 10906/B 10906/C 10906/D 10906/30 without plate or slide cod /A with universal plate cod /B with plate suitable for our chairs cod /C with universal slide cod /D with slide suitable for our chairs cod Anodized aluminium 10909/ /A 10909/B 10909/C 10909/D 10909/30 without plate or slide cod /A with universal plate cod /B with plate suitable for our chairs cod /C with universal slide cod /D with slide suitable for our chairs cod SUITABLE FOR LARGER CHAIRS AND FASTER YACHTS Anodized aluminium - HEAVY DUTY Anodized aluminium - HEAVY DUTY cod /R cod

65 A B C D FIXED HEIGHT CHAIR PEDESTALS, SWIVEL TOP Anodized aluminium CHAIRS PEDESTALS 10506/ /A 10506/B 10506/C 10506/D 10506/42 without plate or slide cod /A with universal plate cod /B with plate suitable for our chairs cod /C with universal slide cod /D with slide suitable for our chairs cod Anodized aluminium 10809/ /A 10809/B 10809/C 10809/D 10809/29 without plate or slide cod /A with universal plate cod /B with plate suitable for our chairs cod /C with universal slide cod /D with slide suitable for our chairs cod Anodized aluminium 10504/ /A 10504/B 10504/C 10504/43 without base and without plate or slide cod /A with universal plate cod /B with plate suitable for our chairs cod /C with universal slide cod /D with slide suitable for our chairs cod /D 65

66 TABLE PEDESTALS & CHAIRS PEDESTALS CHAIRS Yachtsman Seafarer Commodore cod cod PAIR OF CUSHION cod /1 PAIR OF CUSHION cod Admiral cod /2 PAIR OF CUSHION cod cod /4 PAIR OF CUSHION cod PLATES AND SLIDERS Universal top plate for chair pedestals Top plate suitable for our chairs cod Universal slide for chair pedestals cod Slide for our chairs stroke 135 mm cod cod for tables stroke 270 mm cod

67 BASES Base for removable pedestals cod Inset base for removable pedestals cod Base for removable pedestals Inset base for removable pedestal cod Inset base for removable pedestals 00106/1 cod Top for removable pedestals TABLE PEDESTALS & CHAIRS PEDESTALS cod Base for removable pedestals cod Cover for inset bases cod Support for folding table for base cod for and 00106/1 bases cod cod

68 SPARE PARTS & ACCESSORIES FOR PEDESTALS, ELECTRIC STRUTS AND TV LIFT Control box TABLE PEDESTALS & CHAIRS PEDESTALS 01053/XXX/XX Keyboard cod XX E 01134/XX Through bulkhead watertight gland cod XX E01135 cod Extension Cable E01160 cod Remote control meters cod meters cod meters cod Movement alarm, buzzer RXTX2RC kit remote control + receiver cod TX2RC additional remote control cod Safety tactile seal BEBIP/12 12 Volt cod BEBIP/24 24 Volt cod BMF5T2B Light 12/24 Volt cod W mt cod W mt cod W mt cod

69 ELECTRIC STRUTS

70 THRUST 1500 N (150 Kg) Electric struts, speed 16 mm/sec ELECTRIC STRUTS 30250/12 push only stroke 250 mm 12 Volt cod /24 push only stroke 250 mm 24 Volt cod /C/12 pair push only stroke 250 mm 12 Volt cod /C/24 pair push only stroke 250 mm 24 Volt cod /12 push only stroke 480 mm 12 Volt cod /24 push only stroke 480 mm 24 Volt cod /C/12 pair push only stroke 480 mm 12 Volt cod /C/24 pair push only stroke 480 mm 24 Volt cod /12 push only stroke 580 mm 12 Volt cod /24 push only stroke 580 mm 24 Volt cod /C/12 pair push only stroke 580 mm 12 Volt cod /C/24 pair push only stroke 580 mm 24 Volt cod /12 push-pull stroke 480 mm 12 Volt cod /24 push-pull stroke 480 mm 24 Volt cod /C/12 pair push-pull stroke 480 mm 12 Volt cod /C/24 pair push-pull stroke 480 mm 24 Volt cod /12 push-pull stroke 580 mm 12 Volt cod /24 push-pull stroke 580 mm 24 Volt cod /C/12 pair push-pull stroke 580 mm 12 Volt cod /C/24 pair push-pull stroke 580 mm 24 Volt cod PUSH only & PUSH-PULL: Supplied with push only or push-pull function. Push only allows manual lifting in case of power breakdown and is recommended for the opening of compartments with a unique access (engine hatches). Push/pull version is required if the closing is not helped by the weight of the object moved. Both versions are available with standard strokes of 480 and 580 mm and on request from 50 to 1500 mm. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec ,75 5,2 15 2,25 4, ,6 3,2 12 1,35 2,7 11 0,6 1, VDC 12 VDC Kg 50 Kg 70 Kg 90 Kg 110 Kg 130 Kg 150 carico / load 70

71 THRUST 1500 N (150 Kg) - with encoder Electric struts, speed 16 mm/sec E30250/2/12 pair push only stroke 250 mm 12 Volt cod E30250/2/24 pair push only stroke 250 mm 24 Volt cod E30000/2/12 pair push only stroke 480 mm 12 Volt cod E30000/2/24 pair push only stroke 480 mm 24 Volt cod E30001/2/12 pair push only stroke 580 mm 12 Volt cod E30001/2/24 pair push only stroke 580 mm 24 Volt cod E40481/2/12 pair push-pull stroke 480 mm 12 Volt cod E40481/2/24 pair push-pull stroke 480 mm 24 Volt cod E40581/2/12 pair push-pull stroke 580 mm 12 Volt cod E40581/2/24 pair push-pull stroke 580 mm 24 Volt cod ELECTRIC STRUTS ENCODER: Struts for installation in pairs, equipped with encoded electronics and control unit to obtain a perfect synchronization, even when subject to different loads. It is possible, where permitted by law, to store up to four different and independent end positions, pre-set by the user at the time of installation, selectable with just a short press of a single button. Can also be used individually when such a precise movement is required, defining a different point of start and arrival. Come with backlit push button control and programming. Available with strokes from 50 to 1500 mm. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec ,75 5,2 15 2,25 4, ,6 3,2 12 1,35 2,7 11 0,6 1, VDC 12 VDC Kg 50 Kg 70 Kg 90 Kg 110 Kg 130 Kg 150 carico / load 71

72 THRUST 2000 N (200 Kg) Electric struts, speed 18 mm/sec ELECTRIC STRUTS 32250/12 push only stroke 250 mm 12 Volt cod /24 push only stroke 250 mm 24 Volt cod /C/12 pair push only stroke 250 mm 12 Volt cod /C/24 pair push only stroke 250 mm 24 Volt cod /12 push only stroke 480 mm 12 Volt cod /24 push only stroke 480 mm 24 Volt cod /C/12 pair push only stroke 480 mm 12 Volt cod /C/24 pair push only stroke 480 mm 24 Volt cod /12 push only stroke 580 mm 12 Volt cod /24 push only stroke 580 mm 24 Volt cod /C/12 pair push only stroke 580 mm 12 Volt cod /C/24 pair push only stroke 580 mm 24 Volt cod /12 push-pull stroke 480 mm 12 Volt cod /24 push-pull stroke 480 mm 24 Volt cod /C/12 pair push-pull stroke 480 mm 12 Volt cod /C/24 pair push-pull stroke 480 mm 24 Volt cod /12 push-pull stroke 580 mm 12 Volt cod /24 push-pull stroke 580 mm 24 Volt cod /C/12 pair push-pull stroke 580 mm 12 Volt cod /C/24 pair push-pull stroke 580 mm 24 Volt cod PUSH only & PUSH-PULL: Supplied with push only or push-pull function. Push only allows manual lifting in case of power breakdown and is recommended for the opening of compartments with a unique access (engine hatches). Push/pull version is required if the closing is not helped by the weight of the object moved. Both versions are available with standard strokes of 480 and 580 mm and on request from 50 to 1500 mm. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec , , ,75 3,5 13 1, ,25 2, VDC 12 VDC Kg 50 Kg 100 Kg 150 Kg 200 carico / load 72

73 THRUST 2000 N (200 Kg) - with encoder Electric struts, speed 18 mm/sec E32250/2/12 pair push only stroke 250 mm 12 Volt cod E32250/2/24 pair push only stroke 250 mm 24 Volt cod E30010/2/12 pair push only stroke 480 mm 12 Volt cod E30010/2/24 pair push only stroke 480 mm 24 Volt cod E30011/2/12 pair push only stroke 580 mm 12 Volt cod E30011/2/24 pair push only stroke 580 mm 24 Volt cod E40482/2/12 pair push-pull stroke 480 mm 12 Volt cod E40482/2/24 pair push-pull stroke 480 mm 24 Volt cod ELECTRIC STRUTS E40582/2/12 pair push-pull stroke 580 mm 12 Volt cod E40582/2/24 pair push-pull stroke 580 mm 24 Volt cod ENCODER: Struts for installation in pairs, equipped with encoded electronics and control unit to obtain a perfect synchronization, even when subject to different loads. It is possible, where permitted by law, to store up to four different and independent end positions, pre-set by the user at the time of installation, selectable with just a short press of a single button. Can also be used individually when such a precise movement is required, defining a different point of start and arrival. Come with backlit push button control and programming. Available with strokes from 50 to 1500 mm. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec , , ,75 3,5 13 1, ,25 2, VDC 12 VDC Kg 50 Kg 100 Kg 150 Kg 200 carico / load 73

74 THRUST 2200 N (220 Kg) Electric struts, speed 8 mm/sec ELECTRIC STRUTS 30250/P4/12 push only stroke 250 mm 12 Volt cod /P4/24 push only stroke 250 mm 24 Volt cod /P4/C/12 pair push only stroke 250 mm 12 Volt cod /P4/C/24 pair push only stroke 250 mm 24 Volt cod /P4/12 push only stroke 480 mm 12 Volt cod /P4/24 push only stroke 480 mm 24 Volt cod /P4/C/12 pair push only stroke 480 mm 12 Volt cod /P4/C/24 pair push only stroke 480 mm 24 Volt cod /P4/12 push only stroke 580 mm 12 Volt cod /P4/24 push only stroke 580 mm 24 Volt cod /P4/C/12 pair push only stroke 580 mm 12 Volt cod /P4/C/24 pair push only stroke 580 mm 24 Volt cod /P4/12 push-pull stroke 480 mm 12 Volt cod /P4/24 push-pull stroke 480 mm 24 Volt cod /P4/C/12 pair push-pull stroke 480 mm 12 Volt cod /P4/C/24 pair push-pull stroke 480 mm 24 Volt cod /P4/12 push-pull stroke 580 mm 12 Volt cod /P4/24 push-pull stroke 580 mm 24 Volt cod /P4/C/12 pair push-pull stroke 580 mm 12 Volt cod /P4/C/24 pair push-pull stroke 580 mm 24 Volt cod PUSH only & PUSH-PULL: Supplied with push only or push-pull function. Push only allows manual lifting in case of power breakdown and is recommended for the opening of compartments with a unique access (engine hatches). Push/pull version is required if the closing is not helped by the weight of the object moved. Both versions are available with standard strokes of 480 and 580 mm and on request from 50 to 1500 mm. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec ,75 5,2 7,5 2,25 4, ,5 1,6 3,2 6 1,35 2,7 5,5 0,6 1, VDC 12 VDC Kg 70 Kg 100 Kg 130 Kg 160 Kg 190 Kg 220 carico / load 74

75 THRUST 2200 N (220 Kg) - with encoder Electric struts, speed 8 mm/sec E30250/P4/2/12 pair push only stroke 250 mm 12 Volt cod E30250/P4/2/24 pair push only stroke 250 mm 24 Volt cod E30000/P4/2/12 pair push only stroke 480 mm 12 Volt cod E30000/P4/2/24 pair push only stroke 480 mm 24 Volt cod E30001/P4/2/12 pair push only stroke 580 mm 12 Volt cod E30001/P4/2/24 pair push only stroke 580 mm 24 Volt cod E40481/P4/2/12 pair push-pull stroke 480 mm 12 Volt cod E40481/P4/2/24 pair push-pull stroke 480 mm 24 Volt cod E40581/P4/2/12 pair push-pull stroke 580 mm 12 Volt cod E40581/P4/2/24 pair push-pull stroke 580 mm 24 Volt cod ELECTRIC STRUTS ENCODER: Struts for installation in pairs, equipped with encoded electronics and control unit to obtain a perfect synchronization, even when subject to different loads. It is possible, where permitted by law, to store up to four different and independent end positions, pre-set by the user at the time of installation, selectable with just a short press of a single button. Can also be used individually when such a precise movement is required, defining a different point of start and arrival. Come with backlit push button control and programming. Available with strokes from 50 to 1500 mm. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec ,75 5,2 7,5 2,25 4, ,5 1,6 3,2 6 1,35 2,7 5,5 0,6 1, VDC 12 VDC Kg 70 Kg 100 Kg 130 Kg 160 Kg 190 Kg 220 carico / load 75

76 THRUST 3000 N (300 Kg) Electric struts, speed 9 mm/sec ELECTRIC STRUTS 32250/P4/12 push only stroke 250 mm 12 Volt cod /P4/24 push only stroke 250 mm 24 Volt cod /P4/C/12 pair push only stroke 250 mm 12 Volt cod /P4/C/24 pair push only stroke 250 mm 24 Volt cod /P4/12 push only stroke 480 mm 12 Volt cod /P4/24 push only stroke 480 mm 24 Volt cod /P4/C/12 pair push only stroke 480 mm 12 Volt cod /P4/C/24 pair push only stroke 480 mm 24 Volt cod /P4/12 push only stroke 580 mm 12 Volt cod /P4/24 push only stroke 580 mm 24 Volt cod /P4/C/12 pair push only stroke 580 mm 12 Volt cod /P4/C/24 pair push only stroke 580 mm 24 Volt cod /P4/12 push-pull stroke 480 mm 12 Volt cod /P4/24 push-pull stroke 480 mm 24 Volt cod /P4/C/12 pair push-pull stroke 480 mm 12 Volt cod /P4/C/24 pair push-pull stroke 480 mm 24 Volt cod /P4/12 push-pull stroke 580 mm 12 Volt cod /P4/24 push-pull stroke 580 mm 24 Volt cod /P4/C/12 pair push-pull stroke 580 mm 12 Volt cod /P4/C/24 pair push-pull stroke 580 mm 24 Volt cod PUSH only & PUSH-PULL: Supplied with push only or push-pull function. Push only allows manual lifting in case of power breakdown and is recommended for the opening of compartments with a unique access (engine hatches). Push/pull version is required if the closing is not helped by the weight of the object moved. Both versions are available with standard strokes of 480 and 580 mm and on request from 50 to 1500 mm. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec ,5 7 8, ,5 5 7, ,75 3,5 6,5 1, ,25 2,5 5, VDC 12 VDC Kg 75 Kg 150 Kg 225 Kg 300 carico / load 76

77 THRUST 3000 N (300 Kg) - with encoder Electric struts, speed 9 mm/sec E32250/P4/2/12 pair push only stroke 250 mm 12 Volt cod E32250/P4/2/24 pair push only stroke 250 mm 24 Volt cod E30010/P4/2/12 pair push only stroke 480 mm 12 Volt cod E30010/P4/2/24 pair push only stroke 480 mm 24 Volt cod E30011/P4/2/12 pair push only stroke 580 mm 12 Volt cod E30011/P4/2/24 pair push only stroke 580 mm 24 Volt cod E40482/P4/2/12 pair push-pull stroke 480 mm 12 Volt cod E40482/P4/2/24 pair push-pull stroke 480 mm 24 Volt cod E40582/P4/2/12 pair push-pull stroke 580 mm 12 Volt cod E40582/P4/2/24 pair push-pull stroke 580 mm 24 Volt cod ELECTRIC STRUTS ENCODER: Struts for installation in pairs, equipped with encoded electronics and control unit to obtain a perfect synchronization, even when subject to different loads. It is possible, where permitted by law, to store up to four different and independent end positions, pre-set by the user at the time of installation, selectable with just a short press of a single button. Can also be used individually when such a precise movement is required, defining a different point of start and arrival. Come with backlit push button control and programming. Available with strokes from 50 to 1500 mm. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec ,5 7 8, ,5 5 7, ,75 3,5 6,5 1, ,25 2,5 5, VDC 12 VDC Kg 75 Kg 150 Kg 225 Kg 300 carico / load 77

78 THRUST 1000 N (100 Kg) Electric struts, speed 36 mm/sec ELECTRIC STRUTS /F/12 push-pull magnetic end of stroke stroke 970 mm 12 Volt cod /F/24 push-pull magnetic end of stroke stroke 970 mm 24 Volt cod /F/12 push-pull magnetic end of stroke stroke 1470 mm 12 Volt cod /F/24 push-pull magnetic end of stroke stroke 1470 mm 24 Volt cod /F/12 push-pull magnetic end of stroke stroke 1970 mm 12 Volt cod /F/24 push-pull magnetic end of stroke stroke 1970 mm 24 Volt cod HIGH SPEED VERSIONS: Ideal for handling structures with long stroke due to their high travel speed, not suitable for lifting. It is essential that long struts are properly incurred if positioned horizontally to prevent flex. Available with strokes ranging between 100 and 2900 mm. Equipped with adjustable magnetic end of stroke. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec , , ,75 3,5 26 1, ,25 2, VDC 12 VDC Kg 25 Kg 50 Kg 75 Kg 100 carico / load 78

79 THRUST 1000 N (100 Kg) - with encoder Electric struts, speed 36 mm/sec E709701/12 push-pull stroke 970 mm 12 Volt cod E709701/24 push-pull stroke 970 mm 24 Volt cod E709701/2/12 pair push-pull stroke 970 mm 12 Volt cod E709701/2/24 pair push-pull stroke 970 mm 24 Volt cod E714701/12 push-pull stroke 1470 mm 12 Volt cod E714701/24 push-pull stroke 1470 mm 24 Volt cod E714701/2/12 pair push-pull stroke 1470 mm 12 Volt cod E714701/2/24 pair push-pull stroke 1470 mm 24 Volt cod E719701/12 push-pull stroke 1970 mm 12 Volt cod E719701/24 push-pull stroke 1970 mm 24 Volt cod E719701/2/12 pair push-pull stroke 1970 mm 12 Volt cod E719701/2/24 pair push-pull stroke 1970 mm 24 Volt cod ELECTRIC STRUTS ENCODER: Struts for installation in pairs, equipped with encoded electronics and control unit to obtain a perfect synchronization, even when subject to different loads. It is possible, where permitted by law, to store up to four different and independent end positions, pre-set by the user at the time of installation, selectable with just a short press of a single button. Can also be used individually when such a precise movement is required, defining a different point of start and arrival. Come with backlit push button control and programming. Available with strokes from 100 to 2900 mm. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec , , ,75 3,5 26 1, ,25 2, VDC 12 VDC Kg 25 Kg 50 Kg 75 Kg 100 carico / load 79

80 THRUST 3800 N (380 Kg) Electric struts, speed 12 mm/sec ELECTRIC STRUTS /12 push only stroke 470 mm 12 Volt cod /24 push only stroke 470 mm 24 Volt cod /C/12 pair push only stroke 470 mm 12 Volt cod /C/24 pair push only stroke 470 mm 24 Volt cod /12 push-pull stroke 470 mm 12 Volt cod /24 push-pull stroke 470 mm 24 Volt cod /C/12 pair push-pull stroke 470 mm 12 Volt cod /C/24 pair push-pull stroke 470 mm 24 Volt cod KG THRUST: Struts designed to lift heavy loads, where the installation in pairs is impossible or the point and/or the angle of thrust are unfavorable. Strokes on request from 50 to 1000 mm. THRUST 3800 N (380 Kg) - with encoder Electric struts, speed 12 mm/sec E404703/12 push only stroke 470 mm 12 Volt cod E404703/24 push only stroke 470 mm 24 Volt cod E404703/2/12 pair push only stroke 470 mm 12 Volt cod E404703/2/24 pair push only stroke 470 mm 24 Volt cod E404704/12 push-pull stroke 470 mm 12 Volt cod E404704/24 push-pull stroke 470 mm 24 Volt cod E404704/2/12 pair push-pull stroke 470 mm 12 Volt cod E404704/2/24 pair push-pull stroke 470 mm 24 Volt cod ENCODER: Struts for installation in pairs, equipped with encoded electronics and control unit to obtain a perfect synchronization, even when subject to different loads. It is possible, where permitted by law, to store up to four different and independent end positions, pre-set by the user at the time of installation, selectable with just a short press of a single button. Can also be used individually when such a precise movement is required, defining a different point of start and arrival. Come with backlit push button control and programming. Available with strokes from 50 to 1000 mm. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec , , ,25 2, VDC 12 VDC Kg 50 Kg 100 Kg 150 Kg 200 Kg 300 Kg 380 carico / load 80

81 THRUST 3800 N (380 Kg) SIDE MOTOR Electric struts, speed 12 mm/sec 4L3003/12 push only stroke 300 mm 12 Volt cod L3003/24 push only stroke 300 mm 24 Volt cod L3003/C/12 pair push only stroke 300 mm 12 Volt cod L3003/C/24 pair push only stroke 300 mm 24 Volt cod L3004/12 push-pull stroke 300 mm 12 Volt cod L3004/24 push-pull stroke 300 mm 24 Volt cod L3004/C/12 pair push-pull stroke 300 mm 12 Volt cod L3004/C/24 pair push-pull stroke 300 mm 24 Volt cod ELECTRIC STRUTS 380 KG SIDE MOTOR: Struts designed with side-mounted engine to shorten length and improve the angle of thrust. Strokes on request from 50 to 1000 mm. THRUST 3800 N (380 Kg) SIDE MOTOR - with encoder Electric struts, speed 12 mm/sec E4L3003/12 push only stroke 300 mm 12 Volt cod E4L3003/24 push only stroke 300 mm 24 Volt cod E4L3003/2/12 pair push only stroke 300 mm 12 Volt cod E4L3003/2/24 pair push only stroke 300 mm 24 Volt cod E4L3004/12 push-pull stroke 300 mm 12 Volt cod E4L3004/24 push-pull stroke 300 mm 24 Volt cod E4L3004/2/12 pair push-pull stroke 300 mm 12 Volt cod E4L3004/2/24 pair push-pull stroke 300 mm 24 Volt cod ENCODER: Struts for installation in pairs, equipped with encoded electronics and control unit to obtain a perfect synchronization, even when subject to different loads. It is possible, where permitted by law, to store up to four different and independent end positions, pre-set by the user at the time of installation, selectable with just a short press of a single button. Can also be used individually when such a precise movement is required, defining a different point of start and arrival. Come with backlit push button control and programming. Available with strokes from 50 to 1000 mm. 4 cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec , , ,25 2, VDC 12 VDC Kg 50 Kg 100 Kg 150 Kg 200 Kg 300 Kg 380 carico / load 81

82 THRUST 1000 N (100 Kg) OPEN WORM - with encoder Electric struts, speed 36 mm/sec, stroke and voltage on request ELECTRIC STRUTS E VX cod Without bracket E VXS cod Open worm struts designed for moving roofs, windows, doors where a limited total length is essential. Made with traveling stainless steel screw with spherical profile Ø 20 mm with POM carriage, to exploit its good sliding properties. Possible installation of struts in pairs electronically synchronized. Available with stroke from 200 to cicli 10 minuti di pausa 4 cycles 10 minutes stop 2 cicli 10 minuti di pausa 2 cycles 10 minutes stop Velocità in mm/sec Speed mm/sec Consumo in A. Current Amp. Amp. mm/sec , , ,75 3,5 26 1, ,25 2, VDC 12 VDC Kg 25 Kg 50 Kg 75 Kg 100 carico / load 82

83 TWO STAGES ELECTRIC STRUTS

84 THRUST 1500 N (150 Kg) Electric struts, stroke 350 mm TWO STAGES ELECTRIC STRUTS length of the closed strut length of the extended strut 20350/12 12 Volt cod /24 24 Volt cod E20350/12 with encoder 12 Volt cod E20350/24 with encorer 24 Volt cod E20350/C/12 pair with encorer 12 Volt cod E20350/C/24 pair with encorer 24 Volt cod Electric struts, stroke 400 mm length of the closed strut length of the extended strut 20400/12 12 Volt cod /24 24 Volt cod E20400/12 with encoder 12 Volt cod E20400/24 with encorer 24 Volt cod E20400/C/12 pair with encorer 12 Volt cod E20400/C/24 pair with encorer 24 Volt cod Electric struts, stroke 500 mm length of the closed strut length of the extended strut 20500/12 12 Volt cod /24 24 Volt cod E20500/12 with encoder 12 Volt cod E20500/24 with encorer 24 Volt cod E20500/C/12 pair with encorer 12 Volt cod E20500/C/24 pair with encorer 24 Volt cod

85 TV LIFT

86 INDOOR VERSIONS The barka two stages telescopic TV lift are incredibly compact, have an outstanding mounting flexibility and ease of set-up of the translation. When shortened, the vertical height of each model is less then it's stroke: where you can fit the screen you can install the TV lift. Available with a stroke of and 800 mm and with the choice of floor or bulkhead mounting. The TV mounting bracket can be lifted up to 36 cm over the minimum. The starting and ending points can be modified electronically to fit the individual requirements. All the versions are suitable for the VESA fixing points 100x x x x x x400 mm. A remote control can be supplied as an optional. BULKHEAD MOUNTING ADJUSTABLE BRACKET Made in anodized light alloy to withstand the harsh marine enviroment TV LIFT FLOOR MOUNTING BASE (150 x 150 mm) 86

87 Stroke 800 mm Stroke 650 mm Stroke 500 mm BULKHEAD MOUNTING ADJUSTABLE BRACKET BULKHEAD MOUNTING ADJUSTABLE BRACKET BULKHEAD MOUNTING ADJUSTABLE BRACKET TV LIFT Floor mounting E170003/12 cod E170002/12 cod E170001/12 cod E170003/24 cod E170002/24 cod E170001/24 cod Bulkhead mounting E170006/12 cod E170005/12 cod E170004/12 cod E170006/24 cod E170005/24 cod E170004/24 cod

88 OUTDOOR VERSIONS In-line motor TV LIFT /12 cod /24 cod E184508/12 with encoder cod E184508/24 with encoder cod Side motor /12 cod /24 cod E184509/12 with encoder cod E184509/24 with encoder cod

89 IGLOO COOLERS

90 Marine cooler Marine cooler IG 36 QT ULTRA IG 48 QT ULTRA capacity length width height weight 34 Lt. 60 cm 34,5 cm 32,5 cm 3,5 Kg. capacity length width height weight 24 Lt. 51 cm 28,5 cm 33,5 cm 2,5 Kg. IG 25 QT cod Marine cooler 45 Lt. 67 cm 37 cm 37 cm 4,2 Kg IG 36 QT ULTRA cod IG 48 QT ULTRA cod Marine cooler capacity length width height weight 45 Lt. 65 cm 36 cm 36 cm 4,2 Kg. IG 48 BREEZE cod Marine cooler capacity length width height weight 51 Lt. 66 cm 38 cm 39 cm 4,3 Kg. IG 54 QT ULTRA cod Marine cooler IGLOO COOLERS capacity length width height weight 66 Lt. 75 cm 42 cm 41 cm 5,2 Kg. IG 70 QT MAX COLD cod Marine cooler capacity length width height weight 68 Lt. 75 cm 42 cm 41 cm 6,1 Kg IG 72 QT SUPER TOUGH cod Marine cooler capacity length width height weight 89 Lt. 88 cm 43 cm 45 cm 7,6 Kg IG 94 QT cod capacity length width height weight 114 Lt. 97 cm 45 cm 45 cm 11 Kg. IG 120 Polar cod

91 Marine cooler Marine cooler IG 150 Q&C IG 100 Q&C IG 150 QT YUKON IG 250 QT YUKON capacity length width height weight 95 Lt. 90 cm 44 cm 43 cm 8,5 Kg. 142 Lt. 102 cm 47 cm 51 cm 14 Kg capacity length width height weight 142 Lt. 124 cm 58 cm 57 cm 28,3 Kg. 236 Lt. 144 cm 65 cm 68 cm 40 Kg IG 100 Q&C cod IG 150 Q&C cod Wheeled cooler IG 150 QT YUKON cod IG 250 QT YUKON cod Wheeled cooler capacity length width height weight 26 Lt. 47 cm 34 cm 41 cm 4 Kg. IG 28 UR cod Wheeled cooler capacity length width height weight 47 Lt. 70 cm 43 cm 48 cm 6 Kg. IG 50 UR cod Wheeled cooler capacity length width height weight 57 Lt. 51 cm 47 cm 52 cm 6,3 Kg. ICE CUBE UR 60 cod Wheeled cooler MAX COLD WH 60 ICE CUBE MC 70 R ICE CUBE 60 B-R capacity length width height weight 57 Lt. 51 cm 47 cm 52 cm 6,3 Kg. 66 Lt. 51 cm 47 cm 60 cm 6,9 Kg. ICE CUBE 60 B-R cod ICE CUBE MC 70 R cod Wheeled cooler IG 110 GLIDE PRO IGLOO COOLERS WH 36 capacity length width height weight 34 Lt. 58 cm 34 cm 41 cm 4,3 Kg. 57 Lt. 72 cm 40 cm 45 cm 6,5 Kg. WH 36 cod MAX COLD WH 60 cod IG 110 GLIDE ULTRA capacity length width height weight 105 Lt. 100 cm 44 cm 51 cm 11,7 Kg. IG 110 Glide ULTRA cod IG 110 Glide PRO cod

92 Playmate cooler ITEM color capacity length width height weight CODE IGPM ELITE-B BLUE 15 Lt. 40 cm 26 cm 38 cm 1,9 Kg IGPM ELITE-R RED IGPM PAL-B BLUE 6 Lt. 30 cm 21 cm 31 cm 1 Kg IGPM PAL-R RED IGPM MINI-R RED 3 Lt. 24 cm 18 cm 25 cm 0,7 Kg ACCESSORIES & SPARE PARTS Kit di bloccaggio a pagliolo Pair of ice can cooler IGLOO COOLERS IG KIT TD cod Handle GELCAN cod Latch IG MAN GR cod IG MAN PC cod IG MAN Q&C cod Hinges for lids - pair IG FRM INOX cod IG FRM ULTRA cod Drain plug IG CNR INOX stainless steel cod IG CNR PL/IN plastic/stainless steel cod IG CNR TT plastic cod IG TPP PC cod IG TPP GR cod

93 The best treatment for your teak, for over 40 years Teak Wonder have been the products of choice for both professional and leisure sailors and is the world market leader. The 3 step treatment has been recognized as the most effective yet least aggressive to get your teak into great shape. TEAK WONDER

94 DRESSING & SEALER INSTANT TEAK CLEANER TEAK WONDER DRESSING & SEALER is a safe and durable, non-oil based product which provides a pleasant golden colour without darkening the teak or producing that fake coloured look. TEAK WONDER DRESSING & SEALER does not make the teak glossy or slippery, does not darken the teak and does not build up an accumulation on the surface. TWDS05 0,5 liter tins (12 pcs per box) cod TWDS1 1 liter tins (8 pcs per box) cod TWDS4 4 liter tins (4 pcs per box) cod CLEANER To remove grease stains from small areas without need of rinsing thoroughly. TWITCL 250 ml bottle (12 pcs per box) cod BRIGHTENER TEAK WONDER TEAK WONDER CLEANER is a powerful cleanser that thoroughly cleans the teak easily and with very little effort, without the need for sanding. TWCL4 4 liter bottle (4 pcs per box) cod COMBO PACK TEAK WONDER BRIGHTENER is a lightening process used to eliminate shading from the teak which may still persist even after the application of the TEAK WONDER CLEANER. TWBR4 4 liter bottle (4 pcs per box) cod The TEAK WONDER COMBO PAK is a complete kit for cleaning small areas. The kit contains a one litre bottle of cleaner and a one litre bottle of brightener to perform the complete cleaning cycle. The bottles are equipped with a handy cap/pourer that allows easy use of the products, avoiding waste. Kit consist of: (8 kit per box) One 1 ltr bottle of TEAK WONDER CLEANER TWCP1 One 1 ltr bottle of TEAK WONDER BRIGHTENER cod Kit consist of: (2 kit per box) TWCP4 One 4 ltr bottle of TEAK WONDER CLEANER One 4 ltr bottle of TEAK WONDER BRIGHTENER cod

95 WATER FILTERS HYDROPURE

96 WATER FILTERS HYDROPURE Filter Housings and Cartridges B A Item HP5SCC HP10SCC HP10X2 Features Water filter complete with 5" carbon cartridge, bracket Water filter complete with 10" carbon cartridge, bracket Double water filter housings for 10" catridges, with bracket IN-OUT Brass connections A B 1/2 F Max working temperature Max working pressure Code /2 F C 8 BAR /4 F Disposable cartridge WORKING CONDITIONS ACTIVATED CARBON POLYPROPYLENE Max working temperature 45 C 80 C FEATURES Materials Nontoxic Filtering medium polyester felt polypropylene End caps and grids polypropylene C A polypropylene WATER FILTERS HYDROPURE Item Flat seals PVC Treating material granular activated carbon of coconut shell Average life-span 3 months variable, max 6 months Maintenance none none Features Maximum pore size Maximum water flow A B C Code CC5 5" granular activated carbon 25 µ 5 liter/min CC10 10" granular activated carbon 25 µ 10 liter/min CPP 10/5 10" Polypropylene filtering medium for watermakers 5 µ 25 liter/min CPP 10/25 10" Polypropylene filtering medium for watermakers 25 µ 25 liter/min The disgusting quality of stored water for drinking, cooking and washing on board yachts and small power vessels is a well recognized problem. Bottled mineral water for drinking is only a partial and mostly inconvenient solution, leaving the crew suffering tainted food and foul washing water besides being exposed to the attendant health risks. It is now possible in a very simple and economical way to free the water of bacteria and suspended matter, and to remove the odours caused by disinfectants such as chlorine. At the same time the taste in the water from contact with rubber, plastic and other unsuitable materials can be eliminated. Stage one is to sterilize the water by using a good disinfectant (Iike chlorine) in the tank to eliminate the main sources of infection (Colitis, Dysentery, Typhus, Cholera, etc.). The disinfectant will also serve to reduce the degradation of the water when stagnated over long periods. Stage two is to pump the water through a HYDROPURE CARBON FILTER so that it is delivered to the tap free from odours and taste and of ali suspended matter (sand, mud, rust, algae, etc.). The modification is quick and simple and, compared with the improved quality of life aboard, the cost is irrelevant. ACCESSORIES Spanner for Hydropure HP Spare plastic bracket for single housing HP5 and HP10 Spare plastic bracket for double housing activated carbon B HP SPANNER cod PLBFA cod PLBFAX2 cod

97 ELECTRONIC SWITCH FOR BILGE PUMPS WW101/12 15 A / 12 Volt cod WW230/12 20 A / 12 Volt cod WW101/24 10 A / 24 Volt cod WW230/24 15 A / 24 Volt cod ELECTRONIC = Debris in the bilge will not damage the Water Witch INSIGNIFICANT CONSUMPTION = 0,004 Amp (at rest) SWITCH ON DELAYED of 6/8 seconds = Prevent pump cycling due to sloshing SWITCH OFF DELAYED of 14/16 seconds = Complete pump off STAINLESS STEEL SENSORS = No problems due to froth or foams COMPACT SIZE = Easy mounting even in restricted locations OVER 20 YEARS OF EXPERIENCE = The Advantage of the First By means of an electronic circuit, the WATER WITCH activates the bilge pump when the water wets the sensors for about 6/8 seconds.the delay avoids pump stutter and once water has left the sensor, the switch continues to run the pump far additional 14/16 seconds to clear the output hose. ASSEMBLY WATER WITCH lower sens must be installed above the residual water level with wires coming out from top. Check that the connections with the pump and the battery are well over the level water can reach. The pictures show two possible mounting of the 101 Water Witch. ELECTRICAL CONNECTIONS 1. Disconnect the battery. 2. Select a mounting location for the Water Witch; the lower water sensor, must be above the residual water level. 3. Always keep the wire connections above the highest water line. 4. Connect the wires in the following order following the wiring diagram below 5.From the Water Witch connect the brown to the Positive (+) side of the pump or device being controlled, connect the Black to the Ground or the Negative (-) side of the battery and connect the Red to the Positive (+) side of the battery through a fuse. 6.Reconnect the battery and the pump will run approximately 3 seconds while the switch self-calibrates. 7.WHENEVER POWER IS APPLIED, THE SWITCH RUNS THE PUMP FOR 3 SECONDS TO SELFCALIBRATE. 8.To test, apply a wet rag across the two sensars on the front of the unit. WATER WITCH 97

98 ACCUMULATORS steel coated with epoxy resin steel coated with epoxy resin AFC/2L cod steel coated with epoxy resin AFC/2T cod AFC/2T-ss Connection in stainless steel cod steel coated with epoxy resin AFC/5T cod AFC/5T-ss Connection in stainless steel cod AFC/8T cod AFC/8T-ss Connection in stainless steel cod ACCUMULATORS, WATER HEATERS, WASTE BIN AND ICE MAKER WATER HEATER Stainless steel AISI horizontal or vertical BX120VH 120 lt. cod STAINLESS STEEL WASTE BIN Save space type PATSS1 cod Brackets for hooking ICE MAKER up to 10 Kg Primary flow Ø 3/4 Stainless steel coil Primary return Ø 3/4 CORD SET Thermometer OUT water Ø 1/2 Electrical resistance IN water Ø 1/2 Thermostat Magnesium anode ACM25 cod

99 BY PLACING ANY ORDER WITH BARKA S.R.L., THE PURCHASER ACKNOWLEDGES TO BE AWARE AND TO ACCEPT THE ENTIRE CONTENTS OF BARKA S GENERAL CONDITIONS OF SALE AND SUPPLY AVAILABLE AT WWW. BARKA.IT, IN THE VERSION IN FORCE AT THE TIME OF THE ORDER Hereinafter is an EXTRACT of the general conditions in force at the time of publication of this catalog EXTRACT OF GENERAL CONDITIONS OF SALE AND SUPPLY 1. Validity. The present general sale and supply terms and conditions ( General Terms ) shall apply to and be incorporated into any sales and supply agreement between BARKA S.r.l. (hereinafter, BARKA ) and the Client (hereinafter the Client ). The application of any different term and condition whatsoever, even if applied by the Client pursuant to reference made to its own purchasing or contractual provisions, is expressly excluded. Any modification to the General Terms herein, shall be endorsed by BAKA in writing, which will have the right to establish specific different conditions in each offer, and such specific condition will prevail over the present General Terms. 2. Offers, orders and completion of the contract. BARKA s offers are not binding nor mandatory. The orders shall be valid only if issued in writing and sent to BARKA, also by telefax or by , to the addresses communicated by BARKA itself. The contract will be settled when BARKA will receive client s order. After the order has been received, the order cannot be cancelled by the client, without BARKA s written acknowledgement. BARKA reserves the right to reject the order by written communication to the Client sent within 5 days from order s receipt. 3. Characteristics of the Products Modifications. Any information or data relating to features and/or specifications of the Products contained in depliants, price lists, catalogues and similar documents, including BARKA s website, are indicative and not binding for BARKA; the Client will observe the instructions for the use of the Products contained in the BARKA s catalogues and/or website, which are binding for the Client. 4. Prices and payments. Unless otherwise expressly indicated, price has to be considered in Euros, for each unit of Product, net from VAT and net from packaging, custom, freight and transportation costs. Prices of the Products are indicated in the official price lists of BARKA, as updated from time to time. Contextually or afterwards the price list transmission, the Client may receive special selling conditions related to discounts, conditions and terms of payment and of goods returning, also contained in the order confirmation. Unless otherwise agreed, payment of Products must be done by cash at the time of delivery. Terms of payment are mandatory and therefore BARKA will not grant any discounts, reductions or rounded figures other than those indicated in the special selling conditions granted to the Client. Payment shall be due in total as agreed, even in case of delay in delivery or in case of damage or loss, partial or total, during the transportation, not depending by BARKA. 5. Delivery and transport. Except for otherwise indicated, the products are sold Ex Works BARKA s factory. All costs related to the transportation of the products are born by the Client. Upon delivery to the Client, shipper, carrier or to whoever is in charge of the transportation and, in any case, when the Products leave BARKA s factory, the liability of whole or partial loss of the Products is transferred to the Client. If the Client will not comply with any of the terms and conditions of the supply or sale, even in part, or if it changes its name and/or its ownership, or in case the Client delays payments, even towards other creditors, BARKA shall have the right to stop any delivery and to change the payment terms. The packaging of the Products has to be intended as standard packaging. Extra or special packing must be required in advance by the Client and has to be confirmed by BARKA in writing and could determine an additional price. 6. Warranty. BARKA gives a generic warranty for manufacturing fault of its products, for 12 months from the invoice date. The warranty consists on and is limited to the repairing or substitution of the defective component or of the single defective part, provided, however, that they prevent the correct Product functioning and provided also that they exist since the origin. The warranty does not cover and is not extended to defects or damages caused by the transport or caused by negligence in the use or by product direct or indirect manumission or caused by repairing, single components substitution, upkeeps made by non BARKA authorized subjects, or due to technical inexperience, or by way of any circumstances independent from BARKA will. The Client, pain the forfeiture of the guarantee, has to notify to BARKA the defectiveness or the defects eventually found, within 8 days from their appearance, and however not beyond 12 months from the invoice date. The Client has to verify the goods correspond to the law enforced in the goods destination country and it has to inform BARKA, in good time and however before the goods shipment, of the eventual changes to be brought. In this case, BARKA could reject the order or charge the heavier expense to the Client. Any damage to the Products or other personal or property s damage due to any Client s failure to comply with any BARKA s use instructions will be exclusively born by the Client. 7. Goods Return. Except for specific cases accepted in writing, BARKA does not accept any goods return. Before any return procedure, the Client has to make a written claim and the good return has to be previously authorized in writing by BARKA. Cost and expenses of the return are born by the Client and the goods are carriage paid to BARKA s factory. BARKA reserves the right to inspect the returned goods to verify the warranty applicability and, in case of verification of a fault due to BARKA, it will provide to substitute the defective products, or to issue a credit note, only if the warranty is still valid. On the contrary, the goods will be sent back to the Client with transport charges to be paid by the Client itself. 8. BARKA s Intellectual Property. The Client expressly recognizes that trademarks, commercial names or other distinctive marks on the goods are in the exclusive property of the BARKA and will not be altered, changed, removed or cancelled in any manner. The Client has the limited right to use trademarks, commercial names or other distinctive marks, as well as other industrial exclusive right or Know how (productive or commercial) associated with the goods - which nonetheless remain in the exclusive property of BARKA - to the limited purpose of the resale of the goods to the final consumer. Any other utilization of the BARKA Intellectual Property by the Client, if not expressly granted by BARKA in writing, will be considered an infringement of the exclusive rights of BARKA, and a breach of contract, and will be therefore prosecuted. 9. Sales with property reserve. BARKA reserves the ownership of the products, paid by installments or deferred and the ownership will be transferred to Client only on completion of the entire payment, ex Section 1523 of the Italian Civil Code, provided however that all the risks connected to the products are transferred to the Client at the delivery date. 10. Governing Law Jurisdiction. The sales contract shall be governed and construed in compliance with Italian law. The Court of Milano, Italy - shall have the exclusive jurisdiction in any dispute arising from or in connection with the sale or supply relationship, its agreement, performance or breach whatsoever.

100 Strada Padana Superiore, 256/ Vimodrone - Mi (Italy) Tel: Fax: info@barka.it