Hydraulic vehicle lift SKY-200/250/350. List of parts and appendices Stertil B.V D

Transcription

1 Hydraulic vehicle lift SKY-200/250/350 List of parts and appendices 2015 Stertil B.V D

2 List of parts and appendices for the Stertil-Koni hydraulic vehicle lift SKY-200/250/350 Starting at Serial Number: TZ Note n For some assemblies two lists are present, representing the assemblies of the first or the second generation. First generation assemblies: Flush Mounted type TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ Surface Mounted type TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ TZ All other serial numbers are second generation assemblies. List of Parts and Appendices (Version D) 2 SKY-200/250/350

3 A A List of parts and appendices The following sections will give an overview of the main assemblies and their components: A.1 Summary vehicle lift on page 4, A.2 Lifting assembly on page 6, A.3 Bellows on page 11, A.4 Unlocking assembly on page 13, A.5 Stop plate and cable chain on page 14, A.6 Drive-on ramps on page 15, A.7 Cable duct (surface mounted version) on page 17 A.8 Cable duct (flush mounted version) on page 18, A.9 Console on page 19, A.10 Control box on page 23, A.11 Hydraulic components on page 26, A.12 Hydraulic cylinder on page 32, A.13 Label locations on page 34, A.14 Dimensional drawings on page 35. List of Parts and Appendices (Version D) 3 SKY-200/250/350

4 A List of parts and appendices A.1 Summary vehicle lift Figure A 1.1 Summary vehicle lift List of Parts and Appendices (Version D) 4 SKY-200/250/350

5 Summary vehicle lift Table A 1.1 Vehicle lift Index No. Reference Description Remarks Track 7m SKY 200/ Track 8m SKY 200/ Track 9m SKY 200/ Track 10m SKY 200/ Track 12m SKY 200/ Track 7m SKY Track 8m SKY Track 9m SKY Track 10m SKY Track 12m SKY See A.8 Control console 3 4 See A.2 Lifting device 4 4 See A.6 Drive on ramp-stop plate 5 4 See B.2 Extension SKY-200/250/ See B.3 Fixed drive on ramp L=1860 mm Surface mounted models 7 2 See A.5 Wheel stop Surface mounted models List of Parts and Appendices (Version D) 5 SKY-200/250/350

6 A List of parts and appendices A.2 Lifting assembly FIRST GENERATION SEE PAGE 2 FOR SERIAL NUMBERS ,9,10, Figure A 2.1 Lifting assembly (first generation assemblies) Figure A 2.2 Inclinometer assembly (first generation assemblies) List of Parts and Appendices (Version D) 6 SKY-200/250/350

7 Lifting assembly Table A 2.1 Lifting assembly (first generation assemblies) FIRST GENERATION SEE PAGE 2 FOR SERIAL NUMBERS Index No. Reference Description Remarks Leg Surface mounted models Leg Flush mounted models 3 4 See A.3 Bellows Locking ring, Ø100 mm Axle, Ø70 mm, L=378 mm Locking profile Surface mounted models Locking profile Flush mounted models Tension rod Surface mounted models Tension rod Flush mounted models Bearing ring, 2 mm black Bearing ring, 3 mm yellow Bearing ring, 4 mm white Bearing ring, 5 mm green Bearing block, 150x115x28 mm Bearing bush, Ø60/55x30 mm Bearing ring, 2 mm black Axle, Ø80 mm, L=402 mm Distance bush, Ø90/80x72 mm Bearing bush, Ø85/80x50 mm Axle, Ø60 mm, L=174 mm Locking plate Floor plate Sliding block, 80x65x25 mm Bearing Ø65/45x25 mm Sliding block, 200x99x25 mm Support inclinometer Locking plate, 180x55x8 mm Locking catch Surface mounted models Locking catch Flush mounted models Foot plate, front Surface mounted models Foot plate, front Flush mounted models Foot plate, back Surface mounted models Foot plate, back Flush mounted models Inclinometer with cable Bearing bush, GM Bearing bush, GM 42 4 See A.12 Hydraulic cylinder SKY Stop plate lock Screw, M16x40 mm Roll pin, 4x16 mm Counter sunk screw, M12x25 Tightening torque 70 Nm (50 lbf ft) Hexagon nut M Bolt, M10x Spring washer M10, Hexagon head screw, M16x30 Tightening torque 170 Nm (125 lbf ft) Washer M Hexagon tap bolt M6x16, Spring washer M12 List of Parts and Appendices (Version D) 7 SKY-200/250/350

8 A List of parts and appendices SECOND GENERATION Figure A 2.3 Lifting assembly (second generation assemblies) List of Parts and Appendices (Version D) 8 SKY-200/250/350

9 Lifting assembly SECOND GENERATION Figure A 2.4 Lifting assembly (second generation assemblies) Figure A 2.5 Inclinometer assembly (second generation assemblies) List of Parts and Appendices (Version D) 9 SKY-200/250/350

10 A List of parts and appendices Table A 2.2 Lifting assembly (second generation assemblies) SECOND GENERATION Index No. Reference Description Remarks Leg welding assembly Surface mounted models Leg welding assembly Flush mounted models 3 4 See A.4 Unlocking assembly Locking ring, Ø100 mm Axle, Ø70 mm, L=378 mm Bottom lock Surface mounted models Bottom lock Flush mounted models Pull bar Flush mounted models Bearing ring Ø100/ mm black Bearing ring Ø100/72 5mm black Sealing plug Bearing block Bearing bush, Ø60/55x30 mm Bearing ring Ø100/62 2 mm black Axle, Ø80 mm, L=402 mm Distance bush, Ø90/80x72 mm Bearing bush, Ø85/80x50 mm Axle, Ø60 mm, L=115 mm VZ Locking plate Floor plate rear Bearing block 80x65x25 mm Bearing Ø65/45x25 mm Sliding block, 200x99x25 mm Support inclinometer VZ Floor plate front Locking plate, 180x55x8 mm Top lock Surface mounted models Top lock Flush mounted models Leg support slide Leg support fixed Spacer 50 mm Flush mounted models Inclinometer with cable Bearing bush, Ø60/70 L= Bearing bush, Ø60/70 L= See A.12 Hydraulic cylinder SKY Screw, M16x50 mm Tightening torque 170 Nm (125 lbf ft) Spring washer M Counter sunk screw, M16x40 mm Roll pin, 4x16 mm Screw, M12x25 Tightening torque 70 Nm (50 lbf ft) Hexagon nut M Hex. head screw, M16x30 mm Surface mounted models Tightening torque 170 Nm (125 lbf ft) Hex. head screw, M16x80 mm Flush mounted models Tightening torque 170 Nm (125 lbf ft) Washer M Hexagon tap bolt M6x16, 8.8 List of Parts and Appendices (Version D) 10 SKY-200/250/350

11 Bellows A.3 Bellows FIRST GENERATION SEE PAGE 2 FOR SERIAL NUMBERS Secure with loctite Figure A 3.1 Bellows (first generation assemblies) List of Parts and Appendices (Version D) 11 SKY-200/250/350

12 A List of parts and appendices Table A 3.1 Bellows (first generation assemblies) FIRST GENERATION SEE PAGE 2 FOR SERIAL NUMBERS Index No. Reference Description Remarks Locking plate Stopper Clamping piece Bracket rapid de-aerator Clamping piece Drill drawing hose Clamping piece with pin Fitted screw M10(12)x16 Secure with loctite 243. Remove loose grinded loctite before applying new product Countersunk screw M5x Self locking hexagonal nut M Flat washer M Hexagonal tap bolt M6x Spring washer M Hexagonal tap bolt M8x Spring washer M Hexagonal tap bolt M6x Air connection Support ring bellow Hexagonal lock nut M16, List of Parts and Appendices (Version D) 12 SKY-200/250/350

13 Unlocking assembly A.4 Unlocking assembly SECOND GENERATION Figure A 4.1 Unlocking assembly (second generation assemblies) Table A 4.1 Unlocking assembly (second generation assemblies) SECOND GENERATION Index No. Reference Description Remarks Short stroke cylinder (single acting) Fillister head screw M6x35 mm Straight nipple 1/4"1/8" Knee joint insert 6 1/8" Rapid de-aerator G 1/8" Sound-absorber 1/8" Round head bolt Self locking hexagonal nut M Countersunk screw M6x12 mm Sliding piece L-profile Clapper Hinge bolt Flush nut M Flush spring washer M8 List of Parts and Appendices (Version D) 13 SKY-200/250/350

14 A List of parts and appendices A.5 Stop plate and cable chain Figure A 5.1 Stop plate Table A 5.1 Stop plate Index No. Reference Description Remarks Shaft stop plate Surface mounted models Stop plate Surface mounted models Retaining ring shaft No Cable chain L=1925 Surface mounted models Cable chain L=2240 Flush mounted models Hex.bolt M5x Washer M Plate Finger protection Surface mounted models Finger protection Flush mounted models Hex.bolt M6x Washer M6x Cable gland Hinge plate Washer M Hex. nut M Countersunk screw M16x60 List of Parts and Appendices (Version D) 14 SKY-200/250/350

15 Drive-on ramps A.6 Drive-on ramps Figure A 6.1 Drive-on ramps List of Parts and Appendices (Version D) 15 SKY-200/250/350

16 A List of parts and appendices Table A 6.1 Drive-on ramps Index No. Reference Description Remarks Shaft Stop plate Drive-on ramp part Washer M Retaining ring shaft Countersunk screw M16x60 mm Hinge plate Filling plate Hexagon nut M Countersunk screw M8x30 mm Hexagonal nut M Washer M Anchor ASTA M10x130 mm Only surface mounted models Capsule UKA 3 EAP M10 Only surface mounted models Drive-on ramp part 1 Only surface mounted models Drive-on ramp part 2 Only surface mounted models Strip Only surface mounted models Washer M12 Only surface mounted models Hex. bolt M12x20 mm Only surface mounted models Filling piece For jacking beam (option) Countersunk screw/bzk M12x35 For jacking beam (option) Self locking hexagonal nut M12 For jacking beam (option) Tightening torque 70 Nm (50 lbf ft) Filling plate For jacking beam (option) Round head screw./bzk M12x35 Blocking for jacking beam (option) Distance bush Blocking for jacking beam (option) Blocking Blocking for jacking beam (option) Retaining ring Blocking for jacking beam (option) List of Parts and Appendices (Version D) 16 SKY-200/250/350

17 Cable duct (surface mounted version) A.7 Cable duct (surface mounted version) Figure A 7.1 Cable duct (surface mounted version) Table A 7.1 Cable duct (surface mounted version) Index No. Reference Description Remarks Cable duct L=1600 mm Cable duct left Cable duct right Cover L=700 mm Protection cover Threshold Elbow Side protection Anchor bolt M10x120 mm List of Parts and Appendices (Version D) 17 SKY-200/250/350

18 A List of parts and appendices A.8 Cable duct (flush mounted version) Figure A 8.1 Cable duct (flush mounted version) Table A 8.1 Cable duct (flush mounted version) Index No. Reference Description Remarks Protection cover Cable duct Anchor EXA 8/ Cover Cable duct List of Parts and Appendices (Version D) 18 SKY-200/250/350

19 Console A.9 Console FIRST GENERATION SEE PAGE 2 FOR SERIAL NUMBERS Figure A 9.1 Console (first generation assemblies) List of Parts and Appendices (Version D) 19 SKY-200/250/350

20 A List of parts and appendices Table A 9.1 Console (first generation assemblies) FIRST GENERATION SEE PAGE 2 FOR SERIAL NUMBERS Index No. Reference Description Remarks Operating console SKY /400V 50Hz Operating console SKY /400V 50Hz Operating console SKY /400V 50Hz Frame console Front plate Side plate 4 1 See A.10 Control box SKY 5 1 See A.11 Hydraulic unit /2 valve 24VDC G1/ Double retaining ring M6 Nylon Sound-absorber Buffer Straight screw coupling Hexagonal tap bolt M12x Hexagonal nut M Washer M Hexagonal tap bolt M8x Spring washer M Hexagonal nut M Cylindric screw / zgl M4x Hexagonal nut M Hexagonal tap bolt M6x Self locking hexagonal nut M Round headed screw / bzk M6x Washer M T-screw coupling Short knee coupling Elbow screw coupling Air hose PU Ø8/ Plate rear List of Parts and Appendices (Version D) 20 SKY-200/250/350

21 Console SECOND GENERATION Figure A 9.2 Console (second generation assemblies) List of Parts and Appendices (Version D) 21 SKY-200/250/350

22 A List of parts and appendices Table A 9.2 Console (second generation assemblies) SECOND GENERATION Index No. Reference Description Remarks Operating console SKY /345V 50Hz Operating console SKY /345V 50Hz Operating console SKY /380V 60Hz Operating console SKY /380V 60Hz Operating console SKY /400V 50Hz Operating console SKY /400V 50Hz Operating console SKY /400V 50Hz Frame console Front plate Side plate 4 1 See A.10 Control box SKY 5 1 See A.11 Hydraulic unit Double 3/2 valve 24VDC Double retaining ring M6 Nylon Sound-absorber Buffer Straight screw coupling Hexagonal tap bolt M12x Hexagonal nut M Washer M Hexagonal tap bolt M8x Spring washer M Hexagonal nut M Cylindric screw M4x40 mm Hexagonal nut M Hexagonal tap bolt M6x Self locking hexagonal nut M Round headed screw / bzk M6x Washer M Plate rear Short knee coupling Air hose Ø6/4 List of Parts and Appendices (Version D) 22 SKY-200/250/350

23 Control box A.10 Control box Figure A 10.1 Electric diagram List of Parts and Appendices (Version D) 23 SKY-200/250/350

24 A List of parts and appendices Figure A 10.2 Control box List of Parts and Appendices (Version D) 24 SKY-200/250/350

25 Control box Table A 10.1 Control box Index No. Reference Description Remarks Control box assembly, EU version Control box assembly, USA version Box Cover Control board SKY Including eprom Connection board ST Main safety relay Transformer EI120A Fuse holder USCC Fuse class CC Main switch Acoustic alarm Earth connector TE Cable lowering valve P1 Red Cable lowering valve P2 Yellow Cable lowering valve P3 Green Cable lowering valve P4 Blue Cable inclinometer P1 Red Cable inclinometer P2 Yellow Cable inclinometer P3 Green Cable inclinometer P4 Blue Cable 3/2-valve Track P1-P3 Red-Green Cable 3/2-valve Track P2-P4 Yellow-Blue Motor cable Push button NC contactor Lamp holder + lens, red LED 24V, red IS Barrier USA version Rocker Lighting (option) List of Parts and Appendices (Version D) 25 SKY-200/250/350

26 A A.11 Hydraulic components List of parts and appendices FIRST GENERATION SEE PAGE 2 FOR SERIAL NUMBERS 73 35(36) 70a 85a 98 37(38) 76 70c P b 97 P b P3 70d b 92 P c Figure A 11.1 Hydraulic components (first generation assemblies) List of Parts and Appendices (Version D) 26 SKY-200/250/350

27 Hydraulic components FIRST GENERATION SEE PAGE 2 FOR SERIAL NUMBERS Figure A 11.2 Hydraulic scheme (first generation assemblies) List of Parts and Appendices (Version D) 27 SKY-200/250/350

28 A List of parts and appendices Table A 11.1 Hydraulic components (first generation assemblies) FIRST GENERATION SEE PAGE 2 FOR SERIAL NUMBERS Index No. Reference Description Remarks Hydraulic unit SKY250/350 3x230/400V 50Hz 240 Bar Hydraulic unit SKY200 3x230/400V 50Hz 190 Bar Electric motor 230/400V 50Hz Hydraulic block incl. all parts /2 valve NC incl. solenoid Tightening torque 30 Nm (22 lbf ft) Solenoid 24 VDC Tank 75 l (20 gallon) Pump 5.2 cc EU units Tightening torque 22 Nm (16.5 lbf ft) Flow control valve 4.2 l/min Flow control valve 7.3 l/min Pressure relief valve Tightening torque 25 Nm (18.5 lbf ft) Hydraulic hose P1 L=8000 mm (red) Hydraulic hose P2 L=10500 mm (yellow) Hydraulic hose P3 L=8500 mm (green) Hydraulic hose P4 L=11000 mm (blue) Inclinometers Saddle RAP See A.12 Hydraulic cylinder Hydraulic hose L=480 mm Fillister head screw M6x25 70a/b/c/ Air hose PU diam. 8/6 mm Length depends of track length d Straight coupling, GR 12/10-PS Elbow, WSV 10-PS Straight coupling, G 12-PS Tube, diam. 15x1,5 L=650 mm 85a/b/c Air hose PA1125, diam. 8/6 mm Length depends of track length (black) Quick exhaust valve, G1/ Noise absorber 1/8 RVS, PSS/ Straight coupling 8x1/ Y-joint diam. 8/8/8 mm Elbow joint Coupling RKI Spiral cable PU, diam. 8 mm L=2000 mm black Elbow joint Y-coupling diam. 8/8/8 mm Cable inclinometer P1 (red) Cable inclinometer P2 (yellow) Cable inclinometer P3 (green) Cable inclinometer P4 (blue) Tube 12x1,5 mm Length depends of track length List of Parts and Appendices (Version D) 28 SKY-200/250/350

29 Hydraulic components SECOND GENERATION Figure A 11.3 Hydraulic components (second generation assemblies) List of Parts and Appendices (Version D) 29 SKY-200/250/350

30 A List of parts and appendices SECOND GENERATION Figure A 11.4 Hydraulic scheme (second generation assemblies) List of Parts and Appendices (Version D) 30 SKY-200/250/350

31 Hydraulic components Table A 11.2 Hydraulic components (second generation assemblies) SECOND GENERATION Index No. Reference Description Remarks Hydraulic unit SKY250/350 3x230/400V 50Hz 240 Bar Hydraulic unit SKY200 3x230/400V 50Hz 190 Bar Electric motor 230/400V 50Hz Hydr.block incl. all parts /2 valve NC incl. solenoid Tightening torque 30 Nm (22 lbf ft) Solenoid 24 VDC Tank 75 l (20 gallon) Pump 5.2 cc EU units Tightening torque 22 Nm (16.5 lbf ft) Flow control valve 4.2 l/min Flow control valve 7.3 l/min Pressure relief valve Tightening torque 25 Nm (18.5 lbf ft) Return filter 90 micron Hydraulic hose Red L=3350 mm Hydraulic hose Yellow L=3350 mm Hydraulic hose Green L=3850 mm Hydraulic hose Blue L=3850 mm Hydraulic hose Red L=5000 mm Hydraulic hose Yellow L=7500 mm Hydraulic hose Green L=5000 mm Hydraulic hose Blue L=7500 mm Inclinometers 42 4 See A.12 Hydraulic cylinder Hydraulic hose L=480 mm 70a/b/c Air hose PA diam. 6/4 black Length depends of track length Straight coupling, GR 12/10-PS Elbow, WSV 10-PS Straight coupling, G 12-PS Air cylinder 85a/b/c Air hose PA1125, diam. 8/6 mm Length depends of track length (black) Quick exhaust valve, G1/ Noise absorber Elbow joint 6x18" Y-joint diam. 8/8/8 mm Straight adaptor 1/4"1/8" Coupling 6 mm Spiral cable PU 6 mm Elbow joint Y-coupling 6/6/6 mm Cable inclinometer (red) Cable inclinometer (yellow) Cable inclinometer (green) Cable inclinometer (blue) Hydraulic hose 7m track Hydraulic hose 8m track Hydraulic hose 9m track Hydraulic hose 10m track Hydraulic hose 12m track List of Parts and Appendices (Version D) 31 SKY-200/250/350

32 A List of parts and appendices A.12 Hydraulic cylinder FIRST GENERATION SEE PAGE 2 FOR SERIAL NUMBERS Figure A 12.1 Hydraulic cylinder (first generation assemblies) Table A 12.1 Hydraulic cylinder (first generation assemblies) FIRST GENERATION SEE PAGE 2 FOR SERIAL NUMBERS Index No. Reference Description Remarks Cylinder (stroke 430 mm) Surface mounted models Cylinder (stroke 560 mm) Flush mounted models Adjustable coupling 2 1 Hose burst valve Note n In case of leakage replace the entire cylinder. List of Parts and Appendices (Version D) 32 SKY-200/250/350

33 Hydraulic cylinder SECOND GENERATION Figure A 12.2 Hydraulic cylinder (second generation assemblies) Table A 12.2 Hydraulic cylinder(second generation assemblies) SECOND GENERATION Index No. Reference Description Remarks Cylinder (stroke 430 mm) Surface mounted models Cylinder (stroke 560 mm) Flush mounted models Adjustable coupling 2 1 Hose burst valve Note n In case of leakage replace the entire cylinder. List of Parts and Appendices (Version D) 33 SKY-200/250/350

34 A List of parts and appendices A.13 Label locations Figure A 13.1 Label locations Table A 13.1 Label locations Index No. Reference Description Remarks Operating sticker English/Swedish/Spanish Operating sticker Dutch/German/French Identification plate Sticker "Stertil Koni" Sticker "Stertil Koni" Stertil service sticker Capacity sticker SKY 200 EU Capacity sticker SKY 250 EU Capacity sticker SKY 350 EU Load distribution sticker SKY 200/ Load distribution sticker SKY Loading diagram jacking beams CE sticker User manual SKY 200/250 EU User manual SKY 350 EU List of Parts and Appendices (Version D) 34 SKY-200/250/350

35 Dimensional drawings A.14 Dimensional drawings Figure A 14.1 Dimensional drawings List of Parts and Appendices (Version D) 35 SKY-200/250/350

36 A List of parts and appendices Figure A 14.2 Dimensions List of Parts and Appendices (Version D) 36 SKY-200/250/350

37 Dimensional drawings Figure A 14.3 Dimension details List of Parts and Appendices (Version D) 37 SKY-200/250/350

38 B B List of parts - Variants and options The following sections will give an overview of the main assemblies of the variants and options of the Hydraulic vehicle lift SKY-200/250/350, and their components: B.1 Track lighting on page 39, B.2 Extensions on page 42, B.3 Fixed drive-on ramps on page 43, B.4 Tandem configuration on page 44, B.5 Two speed lowering on page 45, B.6 Remote control on page 46, B.7 Wash bay on page 47, B.8 Air supply kit on page 50, B.9 Mounting set on page 51. List of Parts and Appendices (Version D) 38 SKY-200/250/350

39 Track lighting B.1 Track lighting Figure B 1.1 Track lighting List of Parts and Appendices (Version D) 39 SKY-200/250/350

40 B List of parts - Variants and options Figure B 1.2 Track lighting List of Parts and Appendices (Version D) 40 SKY-200/250/350

41 Track lighting Table B 1.1 Track lighting Index No. Reference Description Remarks Set for SKY 7 meters 8 armatures Set for SKY 8 meters 8 armatures Set for SKY 9 meters 10 armatures Set for SKY 10 meters 10 armatures Set for SKY 12 meters 12 armatures Set for 1 extension 2 armatures 1 * LED-armature 2x LED-engine set 2 per armature Tube 1 per armature Cable LED-armature 1 per armature Relay socket Auxiliary relay Transformer primary 200, 230, 400, 460V sec. 24V Fuse 24 V 10 Amps Fuse 200V 1.25 Amps Depends on Voltage Fuse 230V 1 Amps Depends on Voltage Fuse 400V 0.63 Amps Depends on Voltage Fuse 460V 0.5 Amps Depends on Voltage Rocker NC contactor Extension cable (L=600 mm) Cable set x10.4 * Number depends on track length. List of Parts and Appendices (Version D) 41 SKY-200/250/350

42 B List of parts - Variants and options B.2 Extensions 2 8, 9, Figure B 2.1 Extensions Table B 2.1 Extensions Index No. Reference Description Remarks Extension set 2 pieces for SKY 200/ Extension set 2 pieces for SKY Extension piece SKY 200/ Extension piece SKY Countersunk screw/bzk M16x Hexagonal nut M16 Tightening torque 170 Nm (124 lbf ft) Springring M Hexagonal bolt M20x Hexagonal nut M20 Tightening torque 350 Nm (255 lbf ft) Springring M Filling plate 0,5mm Filling plate 1mm Filling plate 2mm Filling piece For jacking beam (option) Countersunk screw/bzk M12x35 For jacking beam (option) Self locking hexagonal nut M12 For jacking beam (option) Tightening torque 70 Nm (50 lbf ft) Filling plate For jacking beam (option) Stop plate Drive-on ramp short Shaft Retaining ring Round head screw./bzk M12x35 Blocking for jacking beam (option) Distance bush Blocking for jacking beam (option) Blocking Blocking for jacking beam (option) Retaining ring Blocking for jacking beam (option) List of Parts and Appendices (Version D) 42 SKY-200/250/350

43 Fixed drive-on ramps B.3 Fixed drive-on ramps Figure B 3.1 Fixed drive-on ramps Table B 3.1 Fixed drive-on ramps Index No. Reference Description Remarks Drive on ramp 2 m Part 1 and Drive on ramp 2.5 m Part 1,2 and 1x Drive on ramp 3 m Part 1,2 and 2x Drive on ramp 3.5 m Part 1,2 and 3x Drive on ramp 4 m Part 1,2 and 4x Drive-on ramp part Drive-on ramp part Drive-on ramp part Strip Anchor EXA 10/45, 7667 upat GV M10x120 mm 6 8 Hexagonal bolt M12x20 mm 8.8 DIN933 GV 7 8 Washer M12 DIN125A GV Stop plate Drive-on ramp short Shaft 12 4 Retaining ring No.19 DIN6799 GV List of Parts and Appendices (Version D) 43 SKY-200/250/350

44 B List of parts - Variants and options B.4 Tandem configuration Figure B 4.1 Tandem configuration Table B 4.1 Tandem configuration Index No. Reference Description Remarks Set S.M mm Set F.M mm Set S.M mm Set F.M mm Bridge part 1000 mm Bridge part 1500 mm Anchor bolt M Control switch (incl. cables) El. cable RS485 List of Parts and Appendices (Version D) 44 SKY-200/250/350

45 Two speed lowering B.5 Two speed lowering Figure B 5.1 Two speed lowering Table B 5.1 Two speed lowering Index No. Reference Description Remarks Set two speed lowering Hydraulic block two speed lowering Set of 4 pieces Switch two speed lowering (incl. cables) Contactor NC Rotation knob (black) Label two speed lowering List of Parts and Appendices (Version D) 45 SKY-200/250/350

46 B List of parts - Variants and options B.6 Remote control Figure B 6.1 Remote control Table B 6.1 Remote control Index No. Reference Description Remarks Remote control EU-version List of Parts and Appendices (Version D) 46 SKY-200/250/350

47 Wash bay B.7 Wash bay The wash bay option consists of some parts which differ from the standard used components. Table B 7.1 gives an overview of that components. The last column refers to the original sections and figures of that components. Table B 7.1 Wash bay Index No. Reference Description Remarks Section VZ Track 7000 welding assembly See A VZ Track 8000 welding assembly See A VZ Track 9000 welding assembly See A VZ Track welding See A.1 assembly VZ Track welding assembly See A VZ Leg welding assembly Surface mounted models See A VZ Leg welding assembly Flush mounted models See A VZ Locking profile bottom Surface mounted models See A VZ Locking profile bottom Flush mounted models See A VZ Tension rod Surface mounted models See A VZ Tension rod Flush mounted models See A VZ Floor plate See A VZ Locking catch top Surface mounted models See A VZ Locking catch top Flush mounted models See A VZ Foot plate, front Surface mounted models See A VZ Foot plate, front Flush mounted models See A VZ Foot plate, back Surface mounted models See A VZ Foot plate, back Flush mounted models See A VZ Stop plate Surface mounted models See A VZ Hinge plate See A VZ Drive-on ramp part 3 See A VZ Drive-on ramp short ST4250 See A VZ Fixed drive-on ramp short Surface mounted models See A Hydraulic hose red L=3350 See A Hydraulic hose yellow L=3350 See A Hydraulic hose green L=3850 See A Hydraulic hose blue L=3850 See A Hydraulic hose red L=5000 See A Hydraulic hose yellow L=7500 See A Hydraulic hose green L=5000 See A Hydraulic hose blue L=7500 See A Elbow, WSV 10-PS VZ Cylinder (stroke 430 mm) Surface mounted models See A VZ Cylinder (stroke 560 mm) Flush mounted models See A VZ Extension piece See B VZ Fixed drive-on ramp high Surface mounted models See B Adjustable coupling See A WB Operating console SKY /400V 50Hz See Figure B WB Operating console SKY /460V 60Hz See Figure B WB Operating console SKY V 60Hz See Figure B WB Operating console SKY /400V 50Hz See Figure B WB Operating console SKY /460V 60Hz See Figure B WB Operating console SKY V 60Hz See Figure B Frame console See Figure B.7 List of Parts and Appendices (Version D) 47 SKY-200/250/350

48 B List of parts - Variants and options Table B 7.1 Wash bay (Continued) Index No. Reference Description Remarks Section Front plate See Figure B Side plate See Figure B WB Control box assembly, EU See Figure B.7 version WB Control box assembly, USA See Figure B.7 version Case See Figure B Cover See Figure B Cover See Figure B Hex.socket head shoulder See Figure B.7 screw M5(6)x Spacer See Figure B Lock See Figure B Locking plate See Figure B.7 List of Parts and Appendices (Version D) 48 SKY-200/250/350

49 Wash bay Figure B.7 Operating console Note n For all other parts, see section A.8 Cable duct (flush mounted version) on page 18. List of Parts and Appendices (Version D) 49 SKY-200/250/350

50 B List of parts - Variants and options B.8 Air supply kit Figure B 8.1 Air supply kit Table B 8.1 Air supply kit Index No. Reference Description Remarks Air supply kit SKY 1 1 Bracket air supply 2 2 Hex. nut M4 8 DIN934 GV 3 2 Round head screw M4x10 mm 4.8 DIN7985 GV Air supply unit SKL 3/ Knee connection insert 6 1/ (Legris) 6 1 Hose column G3/8'x8 7 1 Adapter ring 3/8 1/ Legris List of Parts and Appendices (Version D) 50 SKY-200/250/350

51 Mounting set B.9 Mounting set Table B.9 Mounting set Index No. Reference Description Remarks Mounting set Anchor rod ASTA M16x Upat Term. verz Capsule UKA 3 EAP M Upat Set of 12 shims 400x40x2 mm Set of 12 shims 1 mm Set of 12 shims 40x180x2 mm Hex. cap screw M16x DIN933 GV Polyurethane kit Mounting set for earthquake areas same as , but then with 8 additional anchors and capsules List of Parts and Appendices (Version D) 51 SKY-200/250/350