FIBER TROUGH CABLE TRAY CATALOG

Size: px

Start display at page:

Download "FIBER TROUGH CABLE TRAY CATALOG"

Vernon Harmon
5 years ago
Views:

1 2012 FIBE TOUG BLE TY TLOG

Fiber Trough the STEEL alternative. Network reliability is of upmost importance when designing a cable management system for fiber optic or high performance copper cabling.

Table of ontents Introduction PGES 1-5 able Tray PGE 7 Fittings PGES 8-15 Splices PGE 17 ccessories PGE 18-19 Supports PGE 20 Support ardware Poor cabling practices (marking, bundling, routing)

2 Fiber Trough the STEEL alternative. Network reliability is of upmost importance when designing a cable management system for fiber optic or high performance copper cabling. Proper cable management is no longer just a desired feature but an integral part of a data center and network that provides the greatest uptime and lowest cost. Table of ontents Introduction PGES 1-5 able Tray PGE 7 Fittings PGES 8-15 Splices PGE 17 ccessories PGE Supports PGE 20 Support ardware Poor cabling practices (marking, bundling, routing) increase downtime and actually cause disruptions. Difficult to understand cable routings, poorly protected cables and improper installation practices lead to increased network operating costs. properly designed and maintained cable management system will maximize network uptime. Outages and downtime are very expensive to business, costing from thousands to even millions of dollars per minute of downtime. comprehensive cable management solution will result in the lowest cost of ownership. ablofil continues to be an innovator in cable management solutions and is proud to introduce Fiber Trough, a cable management system designed to maximize network reliability and minimize lifecyle costs. Fiber Trough utilizes high strength steel components to provide the strength and durability required to manage fiber cabling in the most demanding data center environments. It provides the ultimate in protection and security for fiber optic and copper cabling, and is manufactured to exacting standards so that all components fit together perfectly and install with ease. PGE 21 Specifications PGE ross eference & Index PGE

The Fiber Trough DIFFEENE Fluid Design The built-in radius of Fiber Trough effectively eliminates any sharp angles and bends in the cable pathway that cause pinching and micro crack stresses in fiber

Precision Fit Fiber Trough s all steel construction allows it to be manufactured to precise standards so that tray sections easily fit together and covers slide in place with ease during the

able Protection ll steel construction provides the ultimate protection for fragile fiber optic and copper cables. It keeps cables safe from cuts, crushing problems and improper bend radius issues.

3 The Fiber Trough DIFFEENE Fluid Design The built-in radius of Fiber Trough effectively eliminates any sharp angles and bends in the cable pathway that cause pinching and micro crack stresses in fiber optic cabling. The end result is a simple and elegant finished installation. Precision Fit Fiber Trough s all steel construction allows it to be manufactured to precise standards so that tray sections easily fit together and covers slide in place with ease during the installation process. The Fiber Trough system includes all bends and turns needed for any installation application. able Protection ll steel construction provides the ultimate protection for fragile fiber optic and copper cables. It keeps cables safe from cuts, crushing problems and improper bend radius issues. ll edges are rounded and eased in the fabrication process to ensure than cable insulation and installer is kept safe during installation. Protection from EMI EMI from transformers or high voltage cables can cause signal interference for copper data cables. Fiber Trough s steel construction can be properly earthed to eliminate EMI and reduce noise and attenuation. Security Fiber Trough s tool-less cover removal allows easy cable access. They can also be bolted in place for security purposes. More apacity Fiber Trough has more capacity options to meet the growing use of fiber cabling than the competition. BLE PITY (BSED ON 50% FILL*) FIBE TOUG SEIES FT50/50 FT50/100 FT50/200 FT50/300 FT100/100 FT100/200 FT100/300 FT100/500 FT100/600 TY SIZE ( x - IN) 2 x 2 2 x 4 2 x 8 2 x 12 4 x 4 4 x 8 4 x 12 4 x 20 4 x 24 BLE FILL E (IN 2 ) BLE TYPE E NUMBE OF BLES Fiber " (1.6mm) Fiber " (2.0mm) Fiber " (3.0mm) ibbon " (5.2mm) ategory 5E " (4.32mm) ategory " (6.1mm) ategory " (7.6mm) * 50% fill represents the maximum number of cables that can be practically installed (tray is piled to top of siderails with cable due to cable straightness and gaps between cables). Tray dimensions are nominal. Typical cable diameters - for exact results, use the installed cable diameter provided by manufacturer) STEEL vs. PLSTI ONSTUTION Steel lasts Many manufacturers use cable routing systems manufactured from molded plastic. Over time, plastic trays can sag, lose their shape, discolor and even degrade due to exposure to UV light and other environmental conditions. Steel retains its color and shape over time regardless of the application or environment. Steel tray requires fewer supports Plastic is generally heavier and requires more supports on longer runs. Steel is lighter and more rigid reducing deflection. On longer runs Fiber Trough requires one-half as many supports reducing installation time overall. DEFLETION (IN) SPN (FT) Limited to 6' length omparison of 4" x 8" Fiber Trough to 4" x 8" non-metallic fiber wire management system with identical loads. Simple drill vs. complex punching tool hile splicing standard sections of plastic raceway may appear simple with snap together splicing, most installations require non-standard lengths and the creation of the holes to splice together field modified sections is very labor intensive

DESIGNED FO INSTLLTION ESE EOMMENDED UTTING TOOLS BEST DESIGNED IT OIES Fiber Trough is stocked in durable

single mode fiber cables, are available.

Pre-Galvanized: ontinuous Galvanization Before Fabrication STM 653 Black Painted: Black Powder oated STM D 3451

parts and it is easily installed using standard construction practices and common tools.

Splicing made simple Patented fast splice accessories are available with pre-fitted screws to speed installation

OPTIONL O EZ 304L arbon Steel STM 510 Grade 1008 arbon Steel STM 510 Grade 1008 arbon Steel STM 510 Grade 1008

STM D 3451 Electrozinc: Electrozinc plating STM B 633 Stainless Steel 304L: leaned and Passivated STM 380 316L

acksaw with Miterbox Safe and strong olled top edges add strength and allow covers to snap in place without the

4 DESIGNED FO INSTLLTION ESE EOMMENDED UTTING TOOLS BEST DESIGNED IT OIES Fiber Trough is stocked in durable pre-galvanized and textured flat black powder coat finishes that resist corrosion over the lifetime of the installation. Optional finishes of Orange or Yellow powder coat, often specified for quick identification of multi-mode or single mode fiber cables, are available. FINISES SYMBOL MTEIL FINIS & STNDD Double ut Saw STNDD PG BL arbon Steel arbon Steel STM 510 Grade 1008 Pre-Galvanized: ontinuous Galvanization Before Fabrication STM 653 Black Painted: Black Powder oated STM D 3451 BETTE ircular Saw with 60T-80T Metal Blade Easy installation means lower costs Fiber Trough installs with few parts and it is easily installed using standard construction practices and common tools. Most installers require little training and move on and off the project quickly. Splicing made simple Patented fast splice accessories are available with pre-fitted screws to speed installation time. The bolts are held in place by the splice, just tighten the nuts to secure tray sections. OPTIONL O EZ 304L arbon Steel STM 510 Grade 1008 arbon Steel STM 510 Grade 1008 arbon Steel STM 510 Grade 1008 Stainless Steel ISI Type 304L Yellow Painted: Yellow Powder oated STM D 3451 Orange Painted: Orange Powder oated STM D 3451 Electrozinc: Electrozinc plating STM B 633 Stainless Steel 304L: leaned and Passivated STM L Stainless Steel ISI Type 316L Stainless Steel 316L: leaned and Passivated STM 380 EPTBLE eciprocating Saw or acksaw with Miterbox Safe and strong olled top edges add strength and allow covers to snap in place without the need for additional attachment hardware. The rolled edge design also reduces sharp edges and keeps installers and cables safe. omplete line of accessories ll bends and turns necessary for any installation are available as stocked items. No jobsite fabrication will be needed. Other accessories include cable drops, size reductions, cabinet connections and supports. 4 ll dimensions are nominal. 5

able Tray FT STIGT SETION TY olled edge for cable protection (t) FIBE TOUG TY & FITTINGS EIGT () IDT () LENGT PG BL O INES MM INES MM FEET M STNDD OPTIONL FT 50/50 2 50 2 50 10 3 340 020 960 000 960

4 100 4 100 10 3 340 030 960 004 960 360 960 183 FT 100/200 4 100 8 200 10 3 340 032 960 005 960 361 960 184 FT 100/300 4 100 12 300 10 3 340 033 960 006 960 362 960 185 t FT 100/500* 4 100 20 500 10

5 able Tray FT STIGT SETION TY olled edge for cable protection (t) FIBE TOUG TY & FITTINGS EIGT () IDT () LENGT PG BL O INES MM INES MM FEET M STNDD OPTIONL FT 50/ FT 50/ FT 50/200* FT 50/300* FT 100/ FT 100/ FT 100/ t FT 100/500* FT 100/600* * ibbed bottom for additional rigidity FT STIGT TY OVES (t) IDT () LENGT PG BL O INES MM FEET M STNDD OPTIONL FT FT FT FT FT FT t +2t STNDD FINISES (ref. p.5) PG Pre-Galvanized Steel BL Black Powder oated OPTIONL O Yellow Powder oated Orange Powder oated 6 ll dimensions are nominal. For detailed dimensions, reference pages

Fittings FTFB90 OIZONTL 90 ELBO BSE olled edge for cable protection EIGT IDT () DIUS () PG BL O INES MM INES MM INES MM STNDD OPTIONL FTFB90 50/50 2 50 2 50 4 100 340 914 960 022 960 378 960 201

100/100 4 100 4 100 9.6 244 340 930 960 026 960 382 960 205 FTFB90 100/200 4 100 8 200 9.6 244 340 932 960 027 960 383 960 206 FTFB90 100/300 4 100 12 300 9.

6 244 341 936 960 030 960 386 960 209 FTFB45 OIZONTL 45 ELBO BSE olled edge for cable protection EIGT IDT () DIUS PG BL O INES MM INES MM INES MM STNDD OPTIONL FTFB45 50/50 2 50 2 50 0.

948 960 034 960 390 960 213 FTFB45 100/100 4 100 4 100 4 100 340 960 960 035 960 391 960 214 FTFB45 100/200 4 100 8 200 4 100 340 962 960 036 960 392 960 215 FTFB45 100/300 4 100 12 300 4 100 340 963

6 Fittings FTFB90 OIZONTL 90 ELBO BSE olled edge for cable protection EIGT IDT () DIUS () PG BL O INES MM INES MM INES MM STNDD OPTIONL FTFB90 50/ FTFB90 50/ FTFB90 50/ FTFB90 50/ FTFB90 100/ FTFB90 100/ FTFB90 100/ FTFB90 100/ FTFB90 100/ FTFB45 OIZONTL 45 ELBO BSE olled edge for cable protection EIGT IDT () DIUS PG BL O INES MM INES MM INES MM STNDD OPTIONL FTFB45 50/ FTFB45 50/ FTFB45 50/ FTFB45 50/ FTFB45 100/ FTFB45 100/ FTFB45 100/ FTFB45 100/ FTFB45 100/ FTFB90 OIZONTL 90 ELBO OVE FTFB45 OIZONTL 45 ELBO OVE IDT PG BL O INES MM STNDD OPTIONL FTFB FTFB FTFB FTFB FTFB FTFB IDT PG BL O INES MM STNDD OPTIONL FTFB FTFB FTFB FTFB FTFB FTFB STNDD FINISES (ref. p.5) PG Pre-Galvanized Steel BL Black Powder oated STNDD FINISES (ref. p.5) PG Pre-Galvanized Steel BL Black Powder oated OPTIONL O Yellow Powder oated Orange Powder oated OPTIONL O Yellow Powder oated Orange Powder oated 8 ll dimensions are nominal. For detailed dimensions, reference pages

Fittings FTVI90 VETIL 90 INSIDE ELBO BSE olled edge for cable protection FTVO90 VETIL 90 OUTSIDE ELBO BSE olled edge for cable protection EIGT () IDT PG BL O INES MM INES MM STNDD OPTIONL FTVI90

OPTIONL FTVO90 50/50 2 50 2 50 341 038 960 049 960 405 960 228 FTVO90 50/100 2 50 4 100 341 039 960 050 960 406 960 229 FTVO90 50/200 2 50 8 200 341 041 960 051 960 407 960 230 FTVI90 50/300 2 50 12

401 960 224 FTVI90 100/300 4 100 12 300 340 998 960 046 960 402 960 225 FTVO90 100/100 4 100 4 100 341 054 960 053 960 409 960 232 FTVO90 100/200 4 100 8 200 341 056 960 054 960 410 960 233 FTVO90

7 Fittings FTVI90 VETIL 90 INSIDE ELBO BSE olled edge for cable protection FTVO90 VETIL 90 OUTSIDE ELBO BSE olled edge for cable protection EIGT () IDT PG BL O INES MM INES MM STNDD OPTIONL FTVI90 50/ FTVI90 50/ FTVI90 50/ EIGT () IDT PG BL O INES MM INES MM STNDD OPTIONL FTVO90 50/ FTVO90 50/ FTVO90 50/ FTVI90 50/ FTVO90 50/ FTVI90 100/ FTVI90 100/ FTVI90 100/ FTVO90 100/ FTVO90 100/ FTVO90 100/ FTVI90 100/ FTVI90 100/ FTVO90 100/ FTVO90 100/ FTVI90 VETIL 90 INSIDE ELBO OVE FTVO90 VETIL 90 OUTSIDE ELBO OVE FITS TY EIGT IDT PG BL O INES MM INES MM STNDD OPTIONL FTVI90 50/ FITS TY EIGT IDT PG BL O INES MM INES MM STNDD OPTIONL FTVO90 50/ FTVI90 50/ FTVO90 50/ FTVI90 50/ FTVO90 50/ FTVI90 50/ FTVO90 50/ FTVI90 100/ FTVO90 100/ FTVI90 100/ FTVO90 100/ FTVI90 100/ FTVO90 100/ STNDD FINISES (ref. p.5) PG Pre-Galvanized Steel BL Black Powder oated FTVI90 100/ FTVI90 100/ STNDD FINISES (ref. p.5) PG Pre-Galvanized Steel BL Black Powder oated FTVO90 100/ FTVO90 100/ OPTIONL O Yellow Powder oated Orange Powder oated OPTIONL O Yellow Powder oated Orange Powder oated 10 ll dimensions are nominal. For detailed dimensions, reference pages

Fittings FTT OIZONTL TEE BSE FTB OIZONTL BN BSE olled edge for cable protection olled edge for cable protection EIGT IDT () LENGT () PG BL O INES MM INES MM INES MM STNDD OPTIONL FTT 50/50 2 50 2 50

960 059 960 415 960 238 FTB 50/100 2 50 4 100 14 360 340 131 960 068 960 424 960 247 FTT 50/200 2 50 8 200 18 460 341 106 960 060 960 416 960 239 FTB 50/200 2 50 8 200 18 460 340 133 960 069 960 425

8 Fittings FTT OIZONTL TEE BSE FTB OIZONTL BN BSE olled edge for cable protection olled edge for cable protection EIGT IDT () LENGT () PG BL O INES MM INES MM INES MM STNDD OPTIONL FTT 50/ EIGT IDT () LENGT () PG BL O INES MM INES MM INES MM STNDD OPTIONL FTB 50/ FTT 50/ FTB 50/ FTT 50/ FTB 50/ FTT 50/ FTB 50/ FTT 100/ FTB 100/ FTT 100/ FTT 100/ FTB 100/ FTB 100/ FTT 100/ FTB 100/ FTT 100/ FTB 100/ FTT OIZONTL TEE OVE FTB OIZONTL BN OVE IDT PG BL O INES MM STNDD OPTIONL FTT FTT FTT FTT FTT FTT IDT PG BL O INES MM STNDD OPTIONL FTB FTB FTB FTB FTB FTB STNDD FINISES (ref. p.5) PG Pre-Galvanized Steel BL Black Powder oated STNDD FINISES (ref. p.5) PG Pre-Galvanized Steel BL Black Powder oated OPTIONL O Yellow Powder oated Orange Powder oated OPTIONL O Yellow Powder oated Orange Powder oated 12 ll dimensions are nominal. For detailed dimensions, reference pages

Fittings FTX OIZONTL OSS BSE FTVT UPIGT DOPOUT TEE (OVES INLUDED) Full access allows cable lay-in olled edge for cable protection EIGT IDT () LENGT (/) PG BL O INES MM INES MM INES MM STNDD OPTIONL

otection Pre-assembled splices included STNDD OPTIONL PG BL O FINISES (ref. p.

960 257 FTX 50/300 2 50 12 300 22 560 341 137 960 079 960 435 960 258 FTX 100/100 4 100 4 100 14 360 341 149 960 080 960 436 960 259 FTX 100/200 4 100 8 200 18 460 341 151 960 081 960 437 960 260 FTX

IDT () LENGT () PG BL O INES MM INES MM INES MM STNDD OPTIONL FTVT 50/50 2 50 2 50 6 150 340 662 960 085 960 441 960 264 FTVT 50/100 2 50 4 100 14 360 340 663 960 086 960 442 960 265 FTVT 50/200 2 50

460 340 680 960 090 960 446 960 269 FTVT 100/300 4 100 12 300 22 560 340 681 960 091 960 447 960 270 FTVT 100/500 4 100 20 500 36 900 340 683 960 092 960 448 960 271 Upright Falling Tee Example FTX

9 Fittings FTX OIZONTL OSS BSE FTVT UPIGT DOPOUT TEE (OVES INLUDED) Full access allows cable lay-in olled edge for cable protection EIGT IDT () LENGT (/) PG BL O INES MM INES MM INES MM STNDD OPTIONL FTX 50/ olled edge for cable protection Pre-assembled splices included STNDD OPTIONL PG BL O FINISES (ref. p.5) Pre-Galvanized Steel Black Powder oated Yellow Powder oated Orange Powder oated FTX 50/ FTX 50/ FTX 50/ FTX 100/ FTX 100/ FTX 100/ FTX 100/ FTX 100/ EIGT () IDT () LENGT () PG BL O INES MM INES MM INES MM STNDD OPTIONL FTVT 50/ FTVT 50/ FTVT 50/ FTVT 50/ FTVT 100/ FTVT 100/ FTVT 100/ FTVT 100/ Upright Falling Tee Example FTX OIZONTL OSS OVE IDT PG BL O INES MM STNDD OPTIONL FTX FTX FTX FTX FTX FTX FINISES (ref. p.5) STNDD OPTIONL PG BL O Pre-Galvanized Steel Black Powder oated Yellow Powder oated Orange Powder oated 14 ll dimensions are nominal. For detailed dimensions, reference pages

Splices FTE SQUE OUPLE FTEF FS OUPLE ardware included ardware included FIBE TOUG ESSOIES & SUPPOTS FTE 50 shown FTEF 50 shown PK EIGT PG BL O

INES MM STNDD OPTIONL FTEF 50 20 2 50 341 563 960 016 960 372 960 195 FTEF 100 12 4 100 341 622 960 017 960 373 960 196 FT IGT-ND EDUE ardware

construction onnects straight sections and fittings of different widths PK EIGT EDUTION PG BL O PS INES MM INES MM STNDD OPTIONL FT 50/25 1 2

329 FT 50/150 1 2 50 6 150 341 553 960 151 960 507 960 330 FT 50/200 1 2 50 8 200 341 554 960 152 960 508 960 331 FT 100/50 1 4 100 2 50 341

PK EIGT EDUTION PG BL O PS INES MM INES MM STNDD OPTIONL FTL 50/25 1 2 50 1 25 341 577 960 153 960 509 960 332 FTL 50/50 1 2 50 2 50 341 578

50/200 1 2 50 8 200 341 581 960 157 960 513 960 336 FTL 100/50 1 4 100 2 50 341 691 960 167 960 523 960 346 FTL 100/100 1 4 100 4 100 341 692

plated); M6 serrated flange hex nut (zinc plated) FINISES For a complete description of finishes, see chart on pg. 5.

10 Splices FTE SQUE OUPLE FTEF FS OUPLE ardware included ardware included FIBE TOUG ESSOIES & SUPPOTS FTE 50 shown FTEF 50 shown PK EIGT PG BL O PS INES MM STNDD OPTIONL FTE FTE PK EIGT PG BL O PS INES MM STNDD OPTIONL FTEF FTEF FT IGT-ND EDUE ardware included igid steel construction onnects straight sections and fittings of different widths FTL LEFT-ND EDUE ardware included igid steel construction onnects straight sections and fittings of different widths PK EIGT EDUTION PG BL O PS INES MM INES MM STNDD OPTIONL FT 50/ FT 50/ FT 50/ FT 50/ FT 50/ FT 100/ FT 100/ FT 100/ PK EIGT EDUTION PG BL O PS INES MM INES MM STNDD OPTIONL FTL 50/ FTL 50/ FTL 50/ FTL 50/ FTL 50/ FTL 100/ FTL 100/ FTL 100/ ardware included: M6x12mm square neck carriage bolt (zinc plated); M6 serrated flange hex nut (zinc plated) FINISES For a complete description of finishes, see chart on pg. 5. Example of assembly for a right-hand ➀, left-hand ➁ and concentric ➂ reduction. IGT-ND EDUE IGT-ND EDUE FS OUPLES LEFT-ND EDUE LEFT-ND EDUE ➀ ➁ ➂ 16 ll dimensions are nominal. 17

ccessories FTBE BLIND END FTBP BOTTOM LIGNMENT PLTE FTFL FSTENING LIP FTDL TY OLD DON LIP ardware included ardware included Strong stainless steel

maintain trough bottom alignment with heavy cable loads Snaps on standard bracket Use to hold down tray without hardware Two required per support

MM STNDD OPTIONL FTBE 50/50 1 2 50 2 50 341 537 960 144 960 500 960 323 FTBE 50/100 1 2 50 4 100 341 538 960 145 960 501 960 324 FTBE 50/200 1 2 50

FTBP 300 2 4-12 100-300 341 500 960 142 960 498 960 321 FTBP 600 2 20-24 500-600 341 503 960 143 960 499 960 322 PK 316L BL O PS STNDD OPTIONL FTFL

960 353 FTDL 100 20 4 100 349 254 960 175 960 531 960 354 FTBE 100/100 1 4 100 4 100 341 659 960 159 960 515 960 338 FTBE 100/200 1 4 100 8 200 341

FTBE 100/600 1 4 100 24 600 340 737 960 163 960 519 960 342 FTF BINET ONNETION FLNGE ardware included igid steel construction Provides secure

from 2" to 12" (50-300mm) llows up to 4" flexibility of tray length at termination point Flared design allows tray connection when opening is

526 960 349 PK EIGT PG BL O PS INES MM STNDD OPTIONL FT 1 2 50 349 849 960 176 960 532 960 355 JP EDGE POTETION STIP FTP31L P31 MKING LIP Snap-in

existing splice hardware Strong stainless steel construction over Fastening lip Example Edge protection strip Slip on edge protection Black vinyl

FTP31LBL 50 340 185 BLUE FTP31L 50 340 186 YELLO FT JP 15 1.

11 ccessories FTBE BLIND END FTBP BOTTOM LIGNMENT PLTE FTFL FSTENING LIP FTDL TY OLD DON LIP ardware included ardware included Strong stainless steel construction Strong stainless steel construction Provides closure at ends igid steel construction an be punched for conduit attachment elps maintain trough bottom alignment with heavy cable loads Snaps on standard bracket Use to hold down tray without hardware Two required per support llows easy cover removal without removing tray hold down Two required per support LEGND PTENTED LEGND PTENTED PK EIGT IDT PG BL O PS INES MM INES MM STNDD OPTIONL FTBE 50/ FTBE 50/ FTBE 50/ FTBE 50/ PK FITS TY IDTS PG BL O PS INES MM STNDD OPTIONL FTBP FTBP PK 316L BL O PS STNDD OPTIONL FTFL Support ttachment Example PK FO EIGT 316L BL O PS INES MM STNDD OPTIONL FTDL FTDL FTBE 100/ FTBE 100/ FTBE 100/ FTBE 100/ FTBE 100/ FTF BINET ONNETION FLNGE ardware included igid steel construction Provides secure attachment at tray termination points FT BINET ONNETION Quick, clean connection to data cabinet Unique steel/plastic combination fits tray widths from 2" to 12" (50-300mm) llows up to 4" flexibility of tray length at termination point Flared design allows tray connection when opening is larger than tray width PK EIGT PG BL O PS INES MM STNDD OPTIONL FTF FTF PK EIGT PG BL O PS INES MM STNDD OPTIONL FT JP EDGE POTETION STIP FTP31L P31 MKING LIP Snap-in plastic clip ritable surface allows easy marking/identification PV construction FTFL OVE FSTENING LIP Provides added cover security Utilizes existing splice hardware Strong stainless steel construction over Fastening lip Example Edge protection strip Slip on edge protection Black vinyl 15' roll cut to fit PK PLSTI OLO PS FTP31LO ONGE PK 304L BL O PS STNDD OPTIONL FTFL LENGT VIN FTP31LBL BLUE FTP31L YELLO FT JP M FTP31LGN GEEN ardware included: M6x12mm square neck carriage bolt (zinc plated); M6 serrated flange hex nut (zinc plated) For a complete description of finishes, see chart on pg. 5. FINISES 18 ll dimensions are nominal. 19

Supports Support ardware S STNDD L BKET FTB OD BKET KIT For cable tray installation onto walls. ELI clip prevents bracket compression. EZ BN 1/4, E 25 and ELI are sold separately.

6 345 002 720 941 132 * * Quickly and securely attaches to 3/8", 1/2" and 5/8" threaded rods orks with existing or new installations llows quick attachment of bracket IDT LENGT PG BL INES MM INES MM

EZ BN 1/4, EZ BN 5/16, E 25, E 40 and ELI are sold separately. Designed for 1/4" hardware (sold separately).

6 245 002 770 941 137 * * EZ BN / BT6X12 TD TDPT S 300 12 300 9 230 13.6 345 002 780 941 138 * * POS STNDD POFILE Field cut to any length. an support multiple tray runs.

12 Supports Support ardware S STNDD L BKET FTB OD BKET KIT For cable tray installation onto walls. ELI clip prevents bracket compression. EZ BN 1/4, E 25 and ELI are sold separately. Designed for 1/4" hardware (sold separately). IDT LENGT PG BL O INES MM INES MM STNDD OPTIONL S * * S * * S * * Quickly and securely attaches to 3/8", 1/2" and 5/8" threaded rods orks with existing or new installations llows quick attachment of bracket IDT LENGT PG BL INES MM INES MM STNDD FTB S STNDD BKET EZ N EZ F EZ N an be stacked for multi-level ablofil tray installations. ELI clip prevents bracket compression. EZ BN 1/4, EZ BN 5/16, E 25, E 40 and ELI are sold separately. Designed for 1/4" hardware (sold separately). 6x12 6x20 6x30 6x12 6x20 6x30 IDT LENGT 1 LENGT 2 PG BL O INES MM INES MM INES MM STNDD OPTIONL S * * S * * EZ BN / BT6X12 TD TDPT S * * POS STNDD POFILE Field cut to any length. an support multiple tray runs. Threaded rods, nuts, and washers sold separately. 838/839 SIDE IL SUPPOT BKET LENGT PG BL O INES MM STNDD OPTIONL POS * * POS * * POS * * Used in conjunction with threaded rod to support fiber trough from cable runway. Sold individually. ardware is sold separately. USE IT DE INES /8" /2" or 5/8" PKG. QTY. LENGT EIGT PIT EZ G D 316L BL PE PL FEET M LBS KG FO OMPLETE DESIPTION OF FINISES. SEE T ON PG. 5 EZ N 1/ EZ N 3/ EZ N 1/ EZ F 1/ EZ F 3/ EZ F 1/ EZ N 1/ EZ N 3/ EZ N 1/ EZ BN 1/ EZ BN 5/ BT6X TD 1/4* 1 6' TD 3/8* 1 6' TD 1/2* 1 6' TDPT 10 6" *Product number not available at time of print. *Thread Pitch: 1/4-20; 3/8-16; 1/2-13 FINISES For a complete description of finishes, see chart on pg ll dimensions are nominal. 21

13 Specifications DESIPTION > +2t STIGT SETION t FITTINGS FITTINGS ITEM NUMBE > FT FTFB90 FTFB45 FTVI90 FTVO90 FTT FTB FTX FTVT TY IDT () DIUS () LENGT 1 () LENGT 2 () TNGENT () EIGT TY IDT () DIUS () t t +2t TY EIGT () = 2.0 in / 50mm TY +2t EIGT () = 2.0 in / 50mm in mm in mm in mm in mm in mm lbs kg TY EIGT () = 3.9 in / 100mm TY EIGT () = 3.9 in / 100mm in mm in mm t t LENGT 1 () LENGT 2 () TNGENT () EIGT in mm in mm in mm lbs kg ll dimensions above are exact. 23

ross eference DESIPTION > STIGT SETION FITTINGS FITTINGS ITEM NUMBE > FT FTFB90 FTFB45 FTVI90 FTVO90 FTT FTB FTX FTVT TY DIMENSIONS (x) 2" x 2" 50 x 50 mm 2" x 4" 50 x 100 mm 2" x 8" 50 x 200 mm 2" x

15 FT 50/50 FTFB90 50/50 FTFB45 50/50 FTVI90 50/50 FTVO90 50/50 FTT 50/50 FTB 50/50 FTX 50/50 FTVT 50/50 FT 50/100 FTFB90 50/100 FTFB45 50/100 FTVI90 50/100 FTVO90 50/100 FTT 50/100 FTB 50/100 FTX

50/300 FTB 50/300 FTX 50/300 FTVT 50/300 FT 100/100 FTFB90 100/100 FTFB45 100/100 FTVI90 100/100 FTVO90 100/100 FTT 100/100 FTB 100/100 FTX 100/100 FTVT 100/100 FT 100/200 FTFB90 100/200 FTFB45

14 ross eference DESIPTION > STIGT SETION FITTINGS FITTINGS ITEM NUMBE > FT FTFB90 FTFB45 FTVI90 FTVO90 FTT FTB FTX FTVT TY DIMENSIONS (x) 2" x 2" 50 x 50 mm 2" x 4" 50 x 100 mm 2" x 8" 50 x 200 mm 2" x 12" 50 x 300 mm 4" x 4" 100 x 100 mm 4" x 8" 100 x 200 mm 4" x 12" 100 x 300 mm 4" x 20" 100 x 500 mm 4" x 24" 100 x 600 mm OESPONDING OVE p.7 p.8 p.9 p.10 p.11 p.12 p.13 p.14 p.15 FT 50/50 FTFB90 50/50 FTFB45 50/50 FTVI90 50/50 FTVO90 50/50 FTT 50/50 FTB 50/50 FTX 50/50 FTVT 50/50 FT 50/100 FTFB90 50/100 FTFB45 50/100 FTVI90 50/100 FTVO90 50/100 FTT 50/100 FTB 50/100 FTX 50/100 FTVT 50/100 FT 50/200 FTFB90 50/200 FTFB45 50/200 FTVI90 50/200 FTVO90 50/200 FTT 50/200 FTB 50/200 FTX 50/200 FTVT 50/200 FT 50/300 FTFB90 50/300 FTFB45 50/300 FTVI90 50/300 FTVO90 50/300 FTT 50/300 FTB 50/300 FTX 50/300 FTVT 50/300 FT 100/100 FTFB90 100/100 FTFB45 100/100 FTVI90 100/100 FTVO90 100/100 FTT 100/100 FTB 100/100 FTX 100/100 FTVT 100/100 FT 100/200 FTFB90 100/200 FTFB45 100/200 FTVI90 100/200 FTVO90 100/200 FTT 100/200 FTB 100/200 FTX 100/200 FTVT 100/200 FT 100/300 FTFB90 100/300 FTFB45 100/300 FTVI90 100/300 FTVO90 100/300 FTT 100/300 FTB 100/300 FTX 100/300 FTVT 100/300 FT 100/500 FTFB90 100/500 FTFB45 100/500 FTVI90 100/500 FTVO90 100/500 FTT 100/500 FTB 100/500 FTX 100/500 FTVT 100/500 FT 100/600 FTFB90 100/600 FTFB45 100/600 FTVI90 100/600 FTVO90 100/600 FTT 100/600 FTB 100/600 FTX 100/600 FT FTFB90 FTFB45 FTVI90 FTVO90 FTT FTB FTX included Index PODUT NUMBE IT DESIPTION 838/ Side ail Support Bracket...20 BT6X12... M6x12mm Bolt with ex Nut...21 S... Standard L Bracket...20 S... Standard Bracket...20 EZ BN... Bolt with ex Nut...21 EZ N... oupling Nut...21 EZ F... Flat asher...21 EZ N... ex Nut...21 FT... Straight Section Tray...7 FTB... orizontal Branch Base...13 FTB... orizontal Branch over...13 FTBE... Blind End...18 FTBP... Bottom lignment Plate...18 FT... Straight Tray overs...7 FT... abinet onnection...18 FTF... abinet onnection Flange...18 FTFB45... orizontal 45 Elbow over...9 FTFB90... orizontal 90 Elbow over...8 FTFL... over Fastening lip...19 FTVI90... Vertical 90 Inside Elbow over...10 FTVO90... Vertical 90 Outside Elbow over...11 FTE... Square oupler...17 FTEF... FS oupler...17 FTFB45... orizontal 45 Elbow Base...9 FTFB90... orizontal 90 Elbow Base...8 FTFL... Fastening lip...19 FTDL... Tray old Down lip...19 FTL... Left-and educer...17 FTP31L... P31 Marking lip...18 FTB... od Bracket Kit...21 FT... ight-and educer...17 FTT... orizontal Tee Base...12 FTT... orizontal Tee over...12 FTVI90... Vertical 90 Inside Elbow Base...10 FTVO90... Vertical 90 Outside Elbow Base...11 FTVT... Upright Dropout Tee...15 FTX... orizontal ross Base...14 FTX... orizontal ross over...14 JP... Edge Protection Strip...18 POS... Standard Profile...20 TD... Threaded od...21 TDPT... Threaded od Protector ll dimensions are nominal. 25

15 Xxx 2012 Legrand ll ights eserved Phone Fax State oute 4 Mascoutah, IL 62258

V-TROUGH. Cablofil VENTILATED TROUGH TRAY. designed to be better.

V-TROUGH. Cablofil VENTILATED TROUGH TRAY. designed to be better. V-TOUG ablofil VENTILTED TOUG TY designed o be beer. V-Trough Keep your cables OUT OF SIGT and SEUE. V-Trough cable ray keeps your cables proeced and easy o manage. Is high-srengh seel consrucion maches