and solid bottom 10 straight sections 72 Fittings 42 Covers 77 Splices & connectors 24 accessories Metallic 26 long-span tray
|
|
- Juliana Armstrong
- 5 years ago
- Views:
Transcription
1 P CLE TY LDDE, Trough & Solid ottom ITY luminum Tray 10 straight sections Fittings 20 Covers 22 splices & connectors accessories Metallic 26 long-span tray metallic 28 steel tray 30 stainless Steel tray 32 Fittings 42 Covers 45 splices & connectors 49 CCESSOIES 57 Fasteners 58 Firestop Systems 60 eference Information 63 ung options Fiberglass 70 straight sections 72 Fittings 76 Covers 77 Splices & connectors 78 accessories The P Line of cable tray s is offered in a ide variety of sizes, designs and finishes to meet exacting industry standards. Choose from our extensive selection of rail, rung and bottom styles that are available in a variety of finishes. lso choose from fittings, accessories, fire stop systems and fasteners that ill complete your installation. Legrand representatives have the experience to insure that your cable management needs ill be fulfilled on time and to your specifications. MC Poer Cable Fill Table LDDE TY IDT (IN.) 2C ( G) MX NUME OF CLES PE * TN TypeMC lumrmor 3C ( G) 3C (G 4/0) 3C (500 kcmil) 6 35 cbls 31 cbls 3 cbls 2 cbls 9 52 cbls 45 cbls 5 cbls 3 cbls 71 cbls 63 cbls 7 cbls 5 cbls cbls 94 cbls 11 cbls 7 cbls 143 cbls 6 cbls 15 cbls 10 cbls cbls 157 cbls 18 cbls cbls cbls 204 cbls 22 cbls 15 cbls * Vented cable tray only. 8.LEGND.us/cablofil
2 P CLE TY VENTED Tray options that meet the NEM standard for vented tray 25% of the cable bearing surface must be ventilated. NON-VENTED Tray material side rail heights Inches LDDE STNDD rung VENTILTED TOUG Corrugated SOLID ottom Corrugated SOLID ottom flat SEET Itray luminum ", 9" and " rung spacing 7/8" ide ribs are ½" deep on 2" centers ith air vents 7/8" ide ribs are ½" deep on 2" centers Flat sheet over " rung spacing G long-span luminum ot-dip Galvanized Steel ", " and 18" rung spacing N/ N/ N/ G steel ot-dip Galvanized Steel ", 9" and " rung spacing 7/8" ide ribs are ½" deep on 2" centers ith air vents 7/8" ide ribs are ½" deep on 2" centers N/ Stainless steel L Stainless Steel 304L T Stainless Steel 316L ", 9" and " rung spacing N/ N/ Flat sheet only F fiberglass Fiberglass 4 6 6", 9" and " rung spacing N/ N/ Flat sheet under " rung spacing Data Cable Fill Table LDDE TY IDT (IN.) LOD DEPT (IN.) Cat 5e 4-pr Plenum (.17 IN.) MX NUME OF CLES PE Cat 5e Cat 6e 4-pr 4-pr Non-Plenum Plenum (.19 IN.) (.22 IN.) Cat 6a 4-pr Plenum (.30 IN.) cbls 317 cbls 236 cbls 7 cbls cbls 476 cbls 355 cbls 190 cbls cbls 634 cbls 473 cbls 254 cbls cbls 952 cbls 710 cbls 381 cbls cbls 69 cbls 947 cbls 509 cbls cbls 1587 cbls 1183 cbls 636 cbls cbls 1904 cbls 1420 cbls 763 cbls cbls 422 cbls 314 cbls 169 cbls cbls 643 cbls 480 cbls 258 cbls cbls 844 cbls 629 cbls 338 cbls cbls 66 cbls 944 cbls 508 cbls cbls 1689 cbls 59 cbls 677 cbls cbls 2145 cbls 1600 cbls 860 cbls cbls 2574 cbls 1920 cbls 1032 cbls LDDE TY IDT (IN.) LOD DEPT (IN.) Cat 5e 4-pr Plenum (.17 IN.) MX NUME OF CLES PE Cat 5e Cat 6e 4-pr 4-pr Non-Plenum Plenum (.19 IN.) (.22 IN.) Cat 6a 4-pr Plenum (.30 IN.) cbls 529 cbls 394 cbls 2 cbls cbls 793 cbls 591 cbls 318 cbls cbls 1058 cbls 789 cbls 4 cbls cbls 1587 cbls 1183 cbls 636 cbls cbls 2116 cbls 1578 cbls 848 cbls cbls 2645 cbls 1972 cbls 1061 cbls cbls 3174 cbls 2367 cbls 73 cbls cbls 631 cbls 469 cbls 277 cbls cbls 952 cbls 710 cbls 381 cbls cbls 13 cbls 905 cbls 486 cbls cbls 1820 cbls 1357 cbls 730 cbls cbls 27 cbls 1810 cbls 973 cbls cbls 3174 cbls 2367 cbls 73 cbls cbls 3809 cbls 2841 cbls 1527 cbls metallic 9 For detailed material and finish descriptions, see page 6..LEGND.us/cablofil
3 ITY P CLE TY luminum connectors & fittings: Necessary connectors and fasteners are supplied ith all trays and fittings. Extra connectors for field cuts or spares must be ordered separately. safe load: lloable cable load in pounds per linear foot uniformly distributed. ased on tray ith standard rung on 9" centers and supported on simple beam ith safety factor of 1.5 per NEM VE1. CONCENTTED LOD: ll ladders ith solid rungs and trays ith corrugated bottoms ill support a 200 lb. concentrated load applied at the center of the tray in addition to the NEM-rated cable load ithout collapse. ail heigt (IN.) 4 5 Load DEPT (IN.) Nema Class available lengths (FT.) Ladder s (IN) tray system number ][ ][ MP TING C C C C C C C C C C C C 1000 itray straight sections idths () inches C C C C 1600 rail heights () inches LEGND.us/cablofil
4 P CLE TY vented corrugated solid corrugated solid bottom SUPPOT SPN (FT.) SFE LOD DT (LS./FT.) / DEFLECTION (IN.) / SFETY FCTO ll Legrand aluminum and steel cable trays are Classified by UL as equipment grounding conductors per NEC (UL File No. E60796) itray straight section ctlog numbering example: ottom Type S VENTED ung Spacing ung Spacing ung Spacing ail eight nema Length* VC Vented Corrugated 4 4 class S0 0" non-vented 5 5 material S " SC Solid Corrugated 6 6 S0 0" S Solid ottom 7 7 S * S144 and S0 are standard; S0 and S288 are available ith extended lead time. idth itray straight sections 11 For detailed material and finish descriptions, see page 6..LEGND.us/cablofil
5 P CLE TY 90 orizontal 90 Elbo 60 orizontal 60 Elbo 2 D 90 C 2 60 C D DIUS r IDT adius 2 r2 C D DIUS r IDT adius 2 r2 C D / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /4 itray fittings idths () inches rail heights () inches DIUS () inches 36.LEGND.us/cablofil
6 P CLE TY 45 orizontal 45 Elbo 30 orizontal 30 Elbo 2 45 C D 2 tangent 30 3" C D DIUS r IDT adius 2 r2 C D DIUS r IDT adius 2 r2 C D / / / /2 9 1 / / / / / /8 1 / /4 7 3 / / / / / / / / / / /4 7 7 / / / /4 8 5 / / / / / / / / / / / / / / / / / / / / / / / / / / / /4 9 3 / / / / / / / / / / / / / / / / / / / / / / / / / / / / /4 5 / / / / / / / / / / / / / / / / / / / / / / / /8 3 / / / / / / / / / / / / / / / / / / /8 3 / / / / / / / / / / / / / / / / / / / / / / / / /2 itray horizontal elbo ctlog numbering example: ottom Type LD VENTED LD Ladder ung rail VC Vented Corrugated height fitting 4 4" non-vented DIUS 5 5" 90 SC Solid Corrugated 6 6" material 60 S Solid ottom 7 7" idth itray fittings 13 For detailed material and finish descriptions, see page 6..LEGND.us/cablofil
7 P CLE TY S / L / orizontal educers T orizontal Standard Tee straight 1 L 2 left hand 1 L Length 18 IGT hand main available branch s L DIUS 36 idth itray fittings 14 itray horizontal reducer ctlog numbering example: ottom Type LD-4 -S09-06 idth 2 VENTED rail IDT 1 LD Ladder ung height fitting VC Vented Corrugated 4 4" non-vented 5 5" S SC Solid Corrugated 6 6" material L S Solid ottom 7 7".LEGND.us/cablofil
8 P CLE TY T / ET orizontal educing/expanding Tees reducing tee 2 1 main 1 branch 2 DIUS DIUS DIUS expanding tee 2 1 main 1 branch 2 DIUS DIUS DIUS itray horizontal TEE ctlog numbering example: ottom Type LD-4 -T-06 VENTED rail IDT 1 LD Ladder ung VC Vented Corrugated height fitting 4 4" non-vented DIUS 5 5" ST* SC Solid Corrugated 6 6" material T S Solid ottom 7 7" ET * idth 2 does not apply to Standard Tee (ST). idth 2* itray fittings 15 For detailed material and finish descriptions, see page 6..LEGND.us/cablofil
9 P CLE TY YL / Y orizontal ye ranches X orizontal standard Cross Left hand C IGT hand idt DIUS C /8 4 1 / / /8 7 1 / / / / / / / / / / / / / / / / /8 idth DIUS DIUS DIUS X orizontal reducing Cross 2 1 main 1 branch 2 DIUS DIUS DIUS itray fittings 16 itray horizontal reducing Cross ctlog numbering example: ottom Type LD-4 -X-0906 idth 2 VENTED rail IDT 1 LD Ladder ung VC Vented Corrugated height fitting 4 4" non-vented DIUS 5 5" X SC Solid Corrugated 6 6" material S Solid ottom 7 7".LEGND.us/cablofil
10 P CLE TY 90VO Vertical Outside 90º Elbo 60VO Vertical Outside 60º Elbo DIUS idth rail height DIUS idth rail height / / / / /8 45VO Vertical Outside 45º Elbo 30VO Vertical Outside 30º Elbo DIUS idth rail height DIUS idth rail height 13 5 /8 5 5 / /8 9 1 / /8 5 / /8 3 1 / /8 4 3 / /8 6 3 /8 idths () inches rail heights () inches DIUS () inches 36 itray vertical INside elbo ctlog numbering example: ottom Type LD-6-90vo-06 VENTED LD Ladder ung rail VC Vented Corrugated height fitting DIUS 4 4" non-vented 5 5" 90vo SC Solid Corrugated 6 6" material 60VO S Solid ottom 7 7" 45vo 30vo idth itray fittings 17 For detailed material and finish descriptions, see page 6..LEGND.us/cablofil
11 P CLE TY 90VI Vertical Inside 90º Elbo 60VI Vertical Inside 60º Elbo 90VI 60VI = 4 = 5 = 6 = 7 = 4 = 5 = 6 = 7 adius adius LL LL 18 3 / / / / / / / / / / / / / / / / / / / / /4 1 /8 45VI Vertical Inside 45º Elbo 30VI Vertical Inside 30º Elbo 45VI 30VI = 4 = 5 = 6 = 7 = 4 = 5 = 6 = 7 adius adius LL 16 3 /8 6 3 / /8 7 1 / /8 7 3 / /2 7 5 /8 7 / / / / / / /4 LL 13 5 /8 3 5 / /8 3 3 / /8 3 7 / / /8 5 1 / /8 5 3 / /8 5 1 / /8 5 5 / / / / / / / / / /8 6 7 / / /8 7 1 / /8 7 1 /4 itray fittings 18 idths () inches rail heights () inches DIUS () inches 36 itray vertical INside elbo ctlog numbering example: ottom Type LD-4-90Vi -09 VENTED LD Ladder ung rail VC Vented Corrugated height fitting DIUS 4 4" COdE non-vented 5 5" 90Vi SC Solid Corrugated 6 6" material 60Vi S Solid ottom 7 7" 45Vi 30Vi idth.legnd.us/cablofil
12 P CLE TY Td / TU Vertical Tees VX Vertical Cross TEE don TD VX tee up TU DIUS all rail height DIUS all TEE UP fittings have rungs or bottom members for cable support across the bottom of the fitting. rail height CS Vertical cable Support Elbo CS Supports cables at the top of long vertical drops here the eight of the vertical cable may be excessive. ooks (sold separately) attach to the brace in the elbo; hen used ith cable grips (supplied by others), tension in the vertical cable is relieved and transferred to the elbo. all rail height 4 DIUS DIUS DIUS itray vertical TEE ctlog numbering example: ottom Type LD-4 -TU-09 VENTED LD Ladder ung rail VC Vented Corrugated height fitting 4 4" DIUS non-vented 5 5" TU SC Solid Corrugated 6 6" material TD S Solid ottom 7 7" idth itray fittings 19 For detailed material and finish descriptions, see page 6..LEGND.us/cablofil
13 P CLE TY SFF / lff / spf Covers solid flat flanged louvered FLT flanged solid peaked flanged material straight section cover ctlog numbering example: -lff-s cover type SFF Solid Flat Flanged lff Louvered Flat Flanged SPF Solid Peaked Flanged Length S060 60" S072 72" S0 0" S idth for horizontal elbos ( 90hb/60hb/45hb/30hb) luminum for Ladder and Solid Flat ottoms C luminum for Corrugated ottoms orizontal Elbo cover ctlog numbering example: -Sff cover type SFF Solid Flat Flanged lff Louvered Flat Flanged SPF Solid Peaked Flanged fitting DIUS idth for vertical OUTside elbos ( 90VO/60vo/45v0/30vo) vertical outside Elbo cover ctlog numbering example: material -S f f - 90vo cover type SFF Solid Flat Flanged lff Louvered Flat Flanged SPF Solid Peaked Flanged fitting 90vo 60vo 45vo 30vo DIUS idth rail height 4 4" 5 5" 6 6" 7 7" itray covers for vertical inside elbos (90Vi /60vi /45vi /30vi) vertical inside Elbo cover ctlog numbering example: material -Sff-90vi - cover type SFF Solid Flat Flanged lff Louvered Flat Flanged SPF Solid Peaked Flanged fitting 90vi 60vi 45vi 30vi DIUS idth 20.LEGND.us/cablofil
14 P CLE TY for horizontal TEE (T) and COSS (X) for horizontal educing TEE (T), Expanding TEE (ET) and educing Cross (X) horizontal tee cover ctlog numbering example: material cover type SFF Solid Flat Flanged lff Louvered Flat Flanged SPF Solid Peaked Flanged horizontal educing Tee cover ctlog numbering example: material -Sff-T-06 cover type SFF Solid Flat Flanged lff Louvered Flat Flanged SPF Solid Peaked Flanged -Sff-T-06 fitting T X fitting T ET X DIUS DIUS * vailable branch s dependant on main selection. See tables belo. 1 idth 2* for horizontal straight reducer (S), Left hand educer (L) and ight hand reducer () for horizontal Left hand YE (YL) and ight hand ye (Y) horizontal straight reducer cover ctlog numbering example: material -Sff-S-06 cover type SFF Solid Flat Flanged lff Louvered Flat Flanged SPF Solid Peaked Flanged cover type SFF Solid Flat Flanged lff Louvered Flat Flanged SPF Solid Peaked Flanged fitting S L 1 * vailable reducing s dependant on main selection. See reducing table belo. 2* horizontal left hand ye cover ctlog numbering example: material -Sff-YL- fitting YL Y DIUS idth main s (1) available reducing branch s (2) main s (1) available expanding branch s (2) FCC flat cover connector FCC GE S6 PCC PEKED cover connector PCC GE S6 itray Covers / Material idth Fasteners 4 - FCC -06-GE / Material idth Fasteners 4 - PCC -06-S For detailed material and finish descriptions, see page 6..LEGND.us/cablofil
15 P CLE TY SSP Straight splice kit FSP fitting splice kit SSP GE S6 / Material Fasteners 4 - SSP -S6 " length Designed for splicing Itray straight sections FSP GE S6 / Material Fasteners 4 - FSP -GE 6" length Designed for splicing Itray fittings USP universal splice kit USP universal blank splice kit USP GE S6 / Material Fasteners 4 - USP -GE Designed to transition to P C-channel and other I-beam systems USP GE S6 / Material fasteners 4 - USP -S6 Field drill for connection to trays from other manufacturers EXSP expansion splice kit VSP vertical hanger splice kit itray splices & connectors idths () inches EXSP GE S6 / Material fasteners 4 - EXSP -S6 Install as required P.xx or NEM VE-2 (see p. 61) VSP GE S6 / Material fasteners 4 - VSP -GE For vertical tray support ith threaded rods rail heights () inches LEGND.us/cablofil
16 P CLE TY 90SP 90 connector splice kit FFSP floor flange splice kit 90SP GE S6 FFSP GE S6 ail eight / Material Fasteners 4-90SP -GE ail eight / Material Fasteners 4 - FFSP -S6 Includes 8 splice bolts for connecting trays SP horizontal adjustable splice kit VSP vertical adjustable splice kit Field drill outer splices Includes splices and tray SP GE S6 ail eight / Material Fasteners 4 - SP -S6 VSP GE S6 / Material fasteners 4 - VSP -GE SSP straight reducer splice kit OSP offset reducer splice kit Each side is N/2. SSP GE S6 / Material N Fasteners 4 - SSP - 06-GE OSP GE S6 / Material N Fasteners 4 - OSP S6 itray splices & connectors Ty IDT reduction (N) inches For detailed material and finish descriptions, see page 6. For other s that fit Itray specifications, look for the Itray Compatible logo on pages 40 thru 57..LEGND.us/cablofil
17 P CLE TY SP reducing height splice kit Tc tray-to-box connector (frame type) SP GE S6 TC GE S6 1 / 2 / Material Fasteners SP -GE / Material N Fasteners 4 - TC S6 1 2 options Includes one frame and Designed to support Itray at connection to electrical enclosures E blind end kit DO drop out kit E GE S6 / Material Fasteners 4 - E -06-S6 Includes one frame and DO GE S6 Material Fasteners - do -06-S6 Snaps in place over I-rung DIV Vertical elbo dividers CCLMP cable clamp Z itray accessories outside elbo inside elbo idths () inches rail heights () inches DIUS () inches 36 DIV S6 / Material elbo Fasteners 6 - DIV -90vo--S6 Each divider includes four self-drilling scres CCLMP catalog numbering ex: Cable Size CCLMP 21 Secures MC cable to Itray in vertical installations. One hand installation. Combination bolt/phillips head. Use maximum mm cable size hen specifying clamp. CLE SIZES INCES MM reduction (N) inches LEGND.us/cablofil
18 P CLE TY OCK outdoor conversion kit PS all penetration sleeve 20" M Loose collar slides over sleeve after it is placed in the all G Makes ladder tray all penetrations eather resistant to minimize ater intrusions. emovable cover/shield fastens to tray and all penetration sleeve for the utmost in eather protection. FPS FIe all penetration sleeve Fixed collar is elded to sleeve 20" *+6" side vie end vie OCK GE S6 / Material fasteners 4 - OCK -06-S6 UL *=Nominal classified Tray for idth use ith: *=Tray Side ail eight 2-hr concrete or block alls 2-hr concrete floors 1-hr gypsum alls 2-hr gypsum alls FPS GE S6 / Material fasteners 4G - FPS -06-S6 *+6" M Loose collar slides over sleeve after it is placed in the all Cable trays are attached to both ends of the sleeve using standard splice plate connectors 7/16" diameter holes for 3/8" hardare (not included) G ilti Fire locks Cables Fixed Collar all ssembly (Gypsum all Shon) djustablecollar all nchors (Not Included) Provides a rigid support for cable tray at all penetrations. Overall Cable trays are attached to both length of the sleeve ends is of 20". the sleeve using ill standard splice plate connectors fit alls up to 8" thick. onding jumpers are not required for use 7/16" diameter holes *+6" for 3/8" hardare ith all sleeves. To pairs (not included) of splice plates and fasteners *+6" are included for tray attachment. Penetration Sleeve *=Nominal Tray idth *=Tray Side ail eight PS GE S6 ilti Fire locks / Material fasteners Cables 4M - PS -06-S6 djustable Collar Fixed Collar Floor ssembly Masonry nchors (Not Included) Penetration Sleeve Fabricated cable tray fire stop sleeves from Legrand, combined ith ilti Firestop s, are an economical alternative to the high cost of fabricating protective fire all and floor penetration sleeves in the field. This firestop system provides a rigid support for cable tray in a UL classified system approved for fire all and floor penetrations. fter the sleeve is placed in the all or floor, the loose collar slides over it. ardare for the tray connection only is included. ardare required to mount sleeves to the all or floor is not included. The ilti Fire lock is a compressible fire stop brick, ell-suited for installations here frequent cable changes may be required. locks are easily cut to fit any space, and can be removed and reinstalled hen cable configurations change. hen exposed to fire, the blocks expand to lock the seal in place. Each cable tray firestop sleeve includes: One penetration sleeve ith flanges ilti Fire locks One ilti Firestop Putty Stick ardare for cable tray connection to the all sleeve Number of ilti Fire blocks included ith each sleeve SLEEVE Side rail eight (in.) itray accessories 25 all ssembly (Gypsum all Shon) For detailed material and finish descriptions, see ilti Fire page locks 6. For other s that fit Itray specifications, look for the Itray Compatible logo on pages 40 thru 57..LEGND.us/cablofil
Series 1 Steel - Accessories
- ccessories Standard (L-Shaped) Splice Plates One pair including hardware provided with each section. Prepackaged in pairs in a plastic bag, with hardware. 4-hole pattern L-shaped splice plates. L-shaped
More informationSeries 1 Steel - Straight Sections
- Straight Sections H-1 -Line series able Systems - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding system in this catalog is designed
More informationT&B Cable Tray. In this section...
In this section... T& Cable Tray T& Cable Tray Overview... -260-261 luminum Tray... -262-309 Steel Tray... -310-333 One-Piece Tray... -334-357 Channel Tray... -358-373 Common ccessories... -374-376 Grounding
More informationSeries 1 Steel - Straight Sections
Series 1 Steel - Straight Sections Series 1 Steel H-1 B-Line series Cable Tray Systems Series 1 Steel - ccessories & Fittings Series 1 Steel How The Service dvisor Works We know that your time is important!
More information[ ] ] [ 6a2O s6 Height B PW CABLE TRAY PW CABLE TRAY
PW CBE RY PW CBE RY Covers protect and contain cables. hey are highly recommended ray Covers to avoid damage to the tray contents and to protect against the elements. Some covers can also be attached to
More informationSeries 1 Steel - Straight Sections
LST-1 able Systems - Straight Sections How The Service dvisor Works -Line knows that your time is important! That s why the color-coding system in this catalog is designed to help you select products that
More informationSeries 3 & 4 Stainless Steel - Accessories
Splice Plates Standard 8-hole pattern for all stainless steel splice plates. One pair including hardware provided with straight section. Boxed in pairs with hardware. Expansion Splice Plates Expansion
More informationCable Tray Straight Sections Pages Fittings Pages Inside Vertical Bends. 90 Page Page Page Page 1-15
Premier Ladder Tray When metal ladder cable trays came of age, they were used to support the new armored shielded power cables that were permitted outside the conduit environment. Utilities and industrial
More informationCable Tray Ladder, Trough, Channel, Under Floor, Shielded CH-117O
Cable Tray, Trough, Channel, Under Floor, Shielded C-117O Style Cable Tray Typical Installations Chalfant Cable Trays Tray When metal ladder cable trays came of age, they were used to support the new armored
More informationSeries 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
More informationCABLE TRAY SURFACE RACEWAY J-HOOKS IN-FLOOR SYSTEMS POWER POLES DESK PEDESTALS CHANNEL TRAY
LE TY SUFE EWY J-HOOKS IN-FLOO SYSTEMS POWE POLES DESK PEDESTLS HNNEL TY hannel Tray from MonoSystems MTEIL LENGTH ft. m () HNNEL () HNNEL () HNNEL For 5-years MonoSystems has been creating innovative
More informationChannel Cable Tray - Accessories & Fittings
hannel able Tray - Straight Sections E-1 -Line series able Tray Systems hannel able Tray - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding
More informationADDER SYSTEM CABLE L
17 Introduction CALE LADDE The ICMS cable ladder system consists of a wide range of aluminum and Steel cable ladders, Fittings and accessories. Ladder Trays are available in two models: Tubular rungs mechanically
More informationSeries 2, 3, 4 Steel Cable Ladder Steel Cable Ladder, Series 2, 3, 4 & 5
Cable Ladder with Slotted Rung (shown with alternating slot orientation) Cable Ladder with Slotted Rung (shown with continuous slot down - also available with continuous slot up) HDS-1 Steel Cable Ladder,
More informationACCESSORIES QUICK CONNECTOR COVER BRACKETS BARRIER CUSTOM TEES & CROSSES
ESSOIES QUIK ONNETO OVE KETS IE USTOM TEES & OSSES 548 Nicola Place Port oqutilam, V3 0K4 anada Direct Tel: 4-942-0050 Main Tel: 4-540-0011 Toll Free: 1-888-222-2633 Email: sales@codeelectric.com orderentry@codeelectric.com
More informationSeries 2, 3, 4, & 5 Aluminum - Straight Sections
- Straight Sections I-1 B-Line series Cable Tray Systems - Accessories For Aluminum Fittings see fittings section pages L-1 thru L-17 How The Service Advisor Works We know that your time is important!
More informationKwikSplice Aluminum Cable Tray - Straight Sections & Accessories
KwikSplice luminum able Tray - Straight Sections & ccessories Straight Sections - see pages G-3 G-6 overs - see page G-13 ccessories - see pages G-7 G-18 G-1 -Line series able Tray Systems KwikSplice luminum
More informationSeries 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
More informationREDI-RAIL - Accessories
- ccessories Standard Splice Plate One pair including hardware provided with each straight section. (Expansion splice quantity subtracted) R4-SSP R5-SSP R6-SSP R7-SSP Expansion Splice Plate Bonding jumpers
More informationCTSCL-10. Steel Cable Ladder Cable Support Systems
TSL-10 Steel able Ladder able Support Systems Tray onstruction I-Beam Side Rails ooper B-Line s I-Beam siderails are an integral part of all 2, 3, 4, and 5 series ladder trays. The I-Beam is ideal for
More informationREDI-RAIL - Accessories
Standard Splice Plates One pair including hardware provided with each straight section. Offset Reducing Splice Plates FLEX-MOUNT djustable Splice Plates 1 /4" hardware. Horizontally adjustable to 90. Vertically
More informationI N D U S T R I E S, I N C. MARINE I-BEAMS LADDER SYSTEMS
CHANNEL-TRACK & TUBE-WAY MARINE I-BEAMS LADDER SYSTEMS I-Beam Siderail Ladder Cable Tray End View 1.5".595" 4.188".344" 1.039" 1.5" 4 Siderail Example Rung Detail.85" Features: 1. Siderail is roll formed
More informationSTEEL CABLE TRAY LADDER
STEEL CABLE TAY LADDE 548 Nicola Place Port Coqutilam, BC V3B 0K4 Canada Direct Tel: 4-942-0050 Main Tel: 4-540-0011 Toll Free: 1-888-222-2633 Email: sales@codeelectric.com orderentry@codeelectric.com
More informationCLSME-12. NEMA 12B Rated Aluminium Cable Ladder System
LSME-12 NEM 12 ated luminium able Ladder System ooper Industries and ooper -Line The ooper facility located in Dammam, Saudi rabia, is a 50,000-square foot facility which has been designated as a Saudi
More informationCable Tray CT2D-18. Tray2Day SM. cable tray service program
Cable Tray CT2D-18 Tray2Day SM cable tray service program * * At, we believe that power is a fundamental part of just about everything people do. That s why we re dedicated to helping our customers s find
More informationUNITED STRUCTURAL PRODUCTS
UNITED TRUTURL PRODUT LUMINUM BLE TRY YTEM PRODUT TLOG 7/6" DI. OLE FIXED OLLR LOOE OLLR (DJUTBLE) -/4" 5-7/8" 6-/4" W* R* 90 o o 90 ORIZONTL ELBOW W* W*+5.5" 6" +5.5" WLL PENETRTION LEEVE 0" T " GROUND
More informationT&B Cable Tray. Metallic Aluminum. Covers. Number Selection
Number Selection Tray Tray covers are available for all classes of tray. They should be installed where falling objects may damage cables or where vertical tray run is accessible by pedestrian or vehicular
More informationPAINT READY CABLE TRAY
PAINT EADY CABLE TAY SOLID CUSTOM PODE COATING 548 Nicola Place Port Coqutilam, BC V3B 0K4 Canada Direct Tel: 4-942-0050 Main Tel: 4-540-0011 Toll Free: 1-888-222-2633 Email: sales@codeelectric.com orderentry@codeelectric.com
More informationAccessories, Splices and Connectors
10.137 Accessories, Splices and Connectors Splices and Connectors Pgs. 137-142 Misc. Accessories Pgs. 143 Ground Connectors Pg. 144 Separators Pgs 145 For more information or to order, call 1-800-277-4810
More informationSteel Ladder Cable Trays & Accessories
Steel Ladder Cable Trays & Accessories CONTACT GIGA Enterprises Mr. Kostas Samaras Thermaikou 54, Nea Efkarpia 56429 Thessaloniki, Greece Email: info@gigaenterprises.com Phone: +30 698 695 9164 Website:
More informationSwifts cable ladder ancillary items
short reducer brackets Short reducer brackets can be used with all cable ladder ranges to provide a simple and economical way of forming a reducer on site single bracket can be used with a straight coupler
More informationCent-R-Rail Systems. WARNING: Do NOT use as a walkway, ladder or support for personnel. Cent-R-Rail. Cable Tray Systems
114 How The Service Advisor Works Cooper B-Line knows that your time is important! That s why the color-coding system in this catalog is designed to help you select products that fit your service needs.
More informationThe obvious choice in piping cushion clamp assemblies since 1966
The obvious choice in piping clamp assemblies since 1966 TM INTRODUCTION ydra-zorb Co. has been the leader in the strut mounted clamp market for over 40 years, offering a wide variety of solutions when
More informationFRP/GRP Solutions for Cable Management Systems
FP/GP Solutions for Cable Management Systems www.endurocomposites.com elcome to Enduro. This product catalog and guide provides the information you need to design your cable management solution. Should
More informationEZTray. Cable Management Made Easy
EZTray Cable Management Made Easy PRESENTATION Introduction:.................................. 3 EZ Tray: The Tray That Saves You Time!.............. 4-5 EZ Tray: The Innovative Cable Management Solution....
More informationHDMANN. FRP Solutions for Cable Management Systems. cable management system. Cable Tray Instrumentation Tray Accessories
FP Solutions for Cable Management Systems Cable Tray Instrumentation Tray ccessories w w w. h d m a n n. c o m elcome to. This product catalog and guide provides the information you need to design your
More informationTable of Contents. Kit Maximum Examples Index by Kit Number Terms and Conditions...Inside Back Cover
Table of Contents Antenna Mounts Light Standoff Mounts...2 Medium Standoff Mounts...4 Heavy Standoff Mounts...6 Fixed Crossover Assemblies...8 Universal Crossover Assemblies...8 Hybrid Crossover Assemblies...9
More informationELECTRICAL ACCESSORIES FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
ELECTRICL CCESSORIES FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Electrical Fittings Receptacles Fixture Hangers ccessories and Connectors Junction Boxes In-Channel Joiners Swivel Hangers Cable Entrance Tubing
More informationFIBER TROUGH CABLE TRAY CATALOG
2012 FIBE TOUG BLE TY TLOG Fiber Trough the STEEL alternative. Network reliability is of upmost importance when designing a cable management system for fiber optic or high performance copper cabling. Proper
More information229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
More informationJEEP WRANGLER P Q 2X R 4X. K 2x. G 12x. F 2x N. Front Bumper # AD, , AC, # , AC and AC
Kit # 82209740AD JEEP WRANGLER Front umper #82209740AD, 82211715, 82210341A, #82213575, 82211716 82213578 82211715A and 82211716A Kit # 82211715, 82211715A A A L 1 D 12X 4x I F 1 D P Q 2X R 4X F N 4x I
More informationTable of Contents. Wire Cable Tray. Underfloor. Accessories. Index. pages 1-9. pages pages pages pages
Table of Contents Introduction pages 1-9 Wire Cable Tray pages 10-19 Splicing pages 20-27 Wall Mountings pages 28-37 Ceiling Mountings pages 38-47 Underfloor pages 48-59 Other Mountings pages 60-83 Accessories
More informationManufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations;
Corporate Headquarters SHEET METL CONNECTORS, INC. 5850 MIN STREET N.E. MINNEPOLIS, MINNESOT 55432 Toll Free: 800-328-1966 Local: 763-572-0000 Fax: 763-572-1100 www.smcduct.com Manufacturing Facilities
More informationHi-Tech specially designed components allow for fast and easy assembly.
OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces
More informationTrough, Wireway & Strut Attributes
Trough, Wireway & Strut Trough, Wireway & Strut Stahlin offers a broad range of auxiliary products designed to complement a full non metallic wiring system. Wire management through a corrosion resistant
More informationUses, Certifications, and Standards STRUT FITTINGS,BF-FTGS,MISCELLANEOUS
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 B82352 Profile End Cap Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category
More informationNEC 2011 Code Changes
NEC 2011 Code Changes Articles 280.21-300.50 CHANGES FROM 2008 TO 2011 CODE ARE IN RED Chapter 2 - Wiring and Protection ARTICLE 280 Surge Arresters, Over 1kV III. Connecting Surge Arresters 280.21 Connection
More informationTable of Contents. Type: UL/TG/ST 4. Type: UL/TU/ST 13. Type: UL/TT/ST or UL/TC/ST 22. Type: UL/TR/ST 34. Type: UL/LZ/ST 53.
Table of Contents Table of Contents ULI TM Steel Surface Cable Trunking Type: UL/TG/ST 4 ULI TM Steel Perforated Cable Tray Type: UL/TU/ST 13 Type: UL/TT/ST or UL/TC/ST 22 Type: UL/TR/ST 34 ULI TM Steel
More informationGeneral Introduction
General Introduction Al-asoudia Electrical Industries Co. has been established to serve the industry of cable management systems including cable trays, cable ladders, cable glands, cable lugs, earthing,
More informationVENT FLASHINGS GALVANIZED STEEL
FLASHINGS C = CARDED STANDARD ALL-PITCH PLUMBING & ELECTRICAL FLASHING 34-0010 B 1/2 F 1/2 Steel pipe 7/8 I.D. 12 34-0014 B 3/4 F 3/4 Steel pipe 1-1/8 I.D. 12 34-0018 B 1 F 1 Steel pipe or DWV 1-3/8 I.D.
More informationPipe Hangers. Pipe Hangers. Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
More informationCable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/30 Cable Ladder Type 3/50 K-1000 Channel KT3/KT5 Ladder Tray
www.hesales.com.au Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/3 Cable Ladder Type 3/5 K- Channel KT3/KT5 Ladder Tray -.55mm base Galvabond - 2.4m length. 14mm side - Self-splicing
More informationABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 8 71 335 SECTION 4 Cable Ladder and A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO91 Lic No 13146 EDITION 2 SECTION 4: Cable Ladder & Type 3/5 Type 4/7L Type
More informationNEMA CABLE LADDER [GENERAL INFORMATION]
NEMA CABLE LADDER [GENERAL INFORMATION] Cable Support Systems NEMA Cable Ladder Cable Tray Acrofil ire Basket Brackets & Supports Unistrut manufactures and markets the largest range of cable ladder systems
More informationWB24- W -120 CHOOSE TRAY LENGTH WIDTH CHOOSE TRAY LENGTH VENTILATED 10 FT 12 FT 20 FT 24 FT 4, 8, 12, 14, 18, 20 & N/A N/A N/A
WB24- W -120 NEMA TRAY TYPE MATERIAL/FINISH VENTILATED WIRE BASKET TRAY STEEL / MILL GALVANIZED CAT# PREFIX CHOOSE TRAY LENGTH WIDTH CHOOSE TRAY LENGTH VENTILATED 10 FT 12 FT 20 FT 24 FT WB24 4, 8, 12,
More informationSaving you Time, Saving you Money, Putting you First! CENTER HUNG TRAY. Width Length in Inches
INTRODUCTION For an integrated wire management system, Center Hung Tray simplifies the support and routing of power and telecom/teledata cabling. single hanger rod is used at each support point. This makes
More informationPRODUCT CATALOG. 2010, Halex/Scott Fetzer Company TABLE OF CONTENTS. LIQUID Liquid-Tight Conduit Fittings
Electrical Metallic Tubing Fittings MC & C Cable & Flexible Metallic Conduit Fittings Non-Metallic Sheathed Cable Fittings Liquid-Tight Conduit Fittings Rigid & Intermediate Metallic Conduit Fittings Service
More informationaccqpulse Velocity Profiler Sensor Installation Guide
accqpulse Velocity Profiler Sensor Installation Guide Instruction Sheet #69-7403-012 Released May 2016 Overview This instruction guide is for the installation of the accqpulse shallow water and deep water
More informationCABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CLE MNGEMENT SOLUTIONS CTLOGUE2003/04 COMPLETE CLE MNGEMENT SOLUTION FOR COMMERCIL ND INDUSTRIL PPLICTIONS www.legrand.co.uk FSTRCK F31 FSTRCK F31 SYSTEM STEEL WIRE CLE TRY Legrand With a large range of
More informationPipe Hangers. 47 B-Line series Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
More informationA century of Excellence... a legacy of Quality
85" igh with Shelves Take advantage of your existing vertical space and save substantially by installing a Republic shelving mezzanine system. 10 Shelves 9 Openings 8 Shelves 14 Openings D Capacity 36"
More informationQuik-Spec Coordination Panelboard A fusible panelboards
Supersedes July 2018 Quik-Spec Coordination Panelboard 30-400 fusible panelboards Contents Description Page Specifications... 2-3 Enclosure types and voltages/systems.... 4 using, main and feed-through
More informationCeiling and Inline Fans
Ceiling and Inline Fans Page Introduction.....................................2 Construction Features..............................3 Specifications and Dimension Data GC 122-184....................................4
More informationActuator Products Rodless Cylinders. GDL Series. Material specifications. Specifications OSP-P. Series. Series P1X. Series P1Z.
Catalog PDN1-3US High Performance : (s FDC12HP-... thru FDC45HP-...) The High Performance series is the basis for s development, which is used in the majority of applications. High Performance guides consist
More informationSECTION HVAC POWER VENTILATORS
SECTION 233423 HVAC POWER VENTILATORS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationWire ø in. Cat. No. ETQ 2002SS *ETQ 2004SS *ETQ 2006SS
Steel Basket Tray Deep U-Profile Fast connection system, low profile for confined spaces The deep U-profile is ideally suited for light- to medium-duty commercial and industrial applications where space
More informationStandard Product. Cable Pathway QUICK TRAY PRO
Spec-00682 Cable Pathway QUICK TRAY PRO QUICK TRAY PRO Straight Section INDUSTRY STANDARDS UL Classified for suitability as equipment ground conductor only. NFPA 70, National Electrical Code, Article 392:
More informationRoof & Sidewall Mounted
G, G Roof & Sidewall Mounted 4 E40001 - G and G UL/cUL Power Ventilators for Smoke ontrol Systems MH11711 - G UL/cUL Listed 705 is standard on In Stock models G and G are M Licensed for Sound and ir Performance
More informationProduct Catalogue. Cable Management Solutions
Product Catalogue Cable Management Solutions Cable management solutions Introduction Cable ladder & accessories Perforated tray & accessories Trunking & accessories Channel tray & accessories Superstrut
More informationFrequently Asked Questions
Q. When should I use the Adjustable Quadra? A. Use the Adjustable Quadra with #12-24 threaded equipment mounting holes in network facilities to support patch panels, fiber enclosures and network switches.
More informationC OMMERCIAL SOLUTIONS
OMMERIL SOLUTIONS asic luminum Outdoor s... OM 1-2 Small Type I allmount s... OM 3 Large Type I allmount s... OM 4 Small inge over oxes... OM 5 Large inge over oxes... OM 6 Lay-In Type I ireway... OM 7-8
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationCable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
More informationPipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
More information230 kv Aluminum Bolted Bus Supports TYPE 16300, 16500, Ordering Information. or
230 kv luminum 230 kv luminum TYPE 16300, 16500, 16700 Cable Support The 16300, 16500 and 16700 series supports are designed for mounting stranded aluminum or CSR conductors. New cable support reduces
More informationOur mission is to become the supplier of choice for gas venting products and solutions.
Our mission is to become the supplier of choice for gas venting products and solutions. Company Profile Cheminée Lining started out as a sales company that provided customers with quality products and
More informationHigh Density Network Rack Series
igh ensity Network Rack Series The NR system includes a full line of rack, cable management, power, and air flow accessories. NR provides an adjustable in-rack cable management, equipment mounting rails,
More informationMASTER PRICE LIST & CATALOG
MASTER PRICE LIST & CATALOG Effective April 1, 2014 - June 30, 2014 PV Mounting System 2703 PAGES 5-8 SnapNrack Residential PV Mounting Systems www.snapnrack.com 775 Fiero Lane, Suite 200 San Luis Obispo,
More informationSpecifications. UL 1777 and ULC S641 System. Combustion Air System-DuraTech and DuraPlus HTC
Combustion ir System Triple-wall stovepipe system designed to provide air for combustion through its components. UL 1777 and ULC S641. DVL Double-wall interior close clearance stovepipe for connecting
More informationWIREMOLD Wallduct Raceway Systems
WIREMOLD Wallduct Raceway Systems Raceway Solutions for Healthcare pplications Wallduct Raceway Systems are high capacity raceways for use in walls or ceilings. They can be mounted to the wall surface
More informationNEW All Biomass Chimney components are available in matte black. Just add "B" to the end of the part numbers you are ordering.
Type L iomass himney For use with biomass fuels such as pellet, corn, wheat or other grassy and woody plants as specified by appliance manufacturers. Tested and Listed to UL641 Pipe and fittings in 3 and
More informationCable Support Systems. order guide. Australia s leading range of cable and pipe support systems.
order quick guide ustralia s leading range of cable and pipe support systems. www.ezystrut.com.au Contacting U Brisbane Perth delaide ydney outh ustralia ead Office 580 Prospect oad Kilburn outh ustralia,
More informationINSTALLATION INSTRUCTIONS CWEH6-K WALL MOUNT HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS CWEH6-K WALL MOUNT HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationQuik-Spec Coordination Panelboard A fusible panelboards
USSMNN Supersedes December 2015 SERIES Quik-Spec Coordination Panelboard 30-400 fusible panelboards Contents Description Page Specifications.... 2-3 Enclosure types and voltages/systems.... 4 using, main
More informationDuraChimney II. Air-cooled chimney system for masonry fireplaces. UL 103.
DuraChimney II Air-cooled chimney system for masonry fireplaces. UL 103. Specifications Applications DuraChimney II is a double-wall, air-cooled chimney system for use with masonry fireplaces which burn
More informationCUSTOM VENTILATED AWNINGS
CUSTOM VENTILATED AWNINGS FASHION AWNINGS offer you a variety of styles. They are priced differently, they are designed differently both from appearance and from the purpose for which they are to be used.
More informationChicago Metallic 200 Snap Grid 15/16
Part of The ROCKWOOL Group Chicago Metallic 200 Snap Grid 15/16 coustical ceiling suspension system Ideal for: Retail, classrooms, general interiors. Performance Properties: -Intermediate and heavy duty
More informationT&B Cable Tray. Nonmetallic Strut Systems NM -SS P- 100 ( ) ( ) Channels
Channels Thomas & Betts is proud to present its new line of nonmetallic struts and accessoires. You ll find a complete selection of nonmetallic accessoires, fasteners, hangers, pipe clamps and channels.
More informationAmericraft is dedicated to assist you, our customer, in all aspects of your air moving requirements.
mericraft Manufacturing Company Inc. has been manufacturing quality industrial fans and ventilation products since 1946. Our 50+ years of proven experience, strong national reputation and excellent customer
More informationGeneral Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
More informationT H QL Recommendations based on standard conditions. Installation must conform to all local and national codes.
Catalog Number System For illustrative purposes only. Circuit reaker Selection Guide T H L 5 GE Identification Interrupting Rating Type Poles Voltage mpere Rating Insert for Specials H = 0kIC L = Plug-in
More informationAll fitting are offered at 300mm Radius as standard and others Radius available on request.
Heavy Duty Profile Standard s:,,,,,,,, 0-. Other widths are also available on request. EMI Ladder is designed to give a maximum Cable Loading Capacity whilst retaining high strength. By utilizing high
More informationCable & Pipe Supports
LOOK FOR OUR AS3013:2005 FIRE RATED LOGO. It s a sure sign your cable management solution is designed in Australia, rigorously and independently tested to meet Australian standards, and selected from Australia
More informationPRODUCT INDEX PRODUCT INDEX. Item Page Item Page Item Page
PRODUCT CATALOG PRODUCT INDEX Item Page Item Page Item Page PRODUCT INDEX 001 Flat 45 Duct Angle 11 002 Flat 90 Duct Elbow 11 003 Vertical 45 Duct Angle 11 004 Vertical 90 Duct Elbow 11 005 Duct End Cap
More informationSwifts XRF extra heavy duty return flange straight lengths
Swifts F extra heavy duty return flange straight lengths and weights Loading graphs Load tests carried out to BS EN 61537 The loads shown on all graphs are the safe recommended maximum loads that can be
More informationPIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL
PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables 2 40 4 44 MTERIL Unistrut pipe supports, unless
More informationBRACKETS, MOUNTS & HARDWARE
HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,
More informationWire Mesh Safety Grips
Straight Male 90 Male Straight Female L7901 L7915 L7951 Liquid-Tight Grips U* R* Liquid-Tight Grips are woven stainless steel mesh with an anodized aluminum body for corrosion-resistance. They are used
More information