WIREMOLD Wallduct Raceway Systems

Transcription

1 WIREMOLD Wallduct Raceway Systems Raceway Solutions for Healthcare pplications Wallduct Raceway Systems are high capacity raceways for use in walls or ceilings. They can be mounted to the wall surface or flush with the wall to meet equipment layout and room designs. The lay-in feature for enclosure of wire and cable is ideal for use in healthcare rooms, under raised floors, or as a large capacity feeder for perimeter raceway. The cover plates are easily removed for wire and cable access. Wallduct Raceway Systems can also be used with Trenchduct to carry wire and cables from cabinets to egress points anywhere on the floor or wall. Wallduct Raceway Systems are also available in aluminum for applications that require nonferrous metal raceways such as X-ray and MRI scan rooms. luminum Wallduct installed in an MRI Room. FETURES & ENEFITS n Constructed of galvannealed steel. The 14-gauge galvannealed steel has a material thickness of.0785, provides extra corrosion resistance, and is easily painted to match any room interior. n vailable in non-magnetic aluminum material. Meets requirements for MRI facilities in accordance with equipment manufacturer s specifications. n Interior couplings. Offer improved aesthetics when surface mounted. n Complete line of fittings. Lowers installation costs with fittings that can address field conditions and require minimal field modifications. n odies and covers shipped unassembled. No disassembly required before starting system installation. n 10" [254mm] and 18" [457mm] stock. Readily available warehouse stock provides for immediate shipment of customer orders. n utocd capabilities for detailing project drawings. Provides high quality detailing information with the option of electronic communication for a quicker, more accurate exchange of information. n Three standard widths. Provide cable and wire requirements for most applications. n UL Listed (UL File E4376 ase and Cover, E41751 Fittings). Product matches equipment supplier s specifications. Wallduct Raceway bodies are available in multiple widths and with flush and surface cover options. Wallduct Steel or luminum Raceway with lay-in features for enclosure of wire and cable. ED737R11 Updated May 2016 For latest specs visit

2 Wallduct Series Raceway System Layout Wallduct is commonly used in the healthcare market to feed wires and cables from electric and communication cabinets to X-ray and MRI equipment. See typical application shown. ecause some healthcare equipment requires nonmetallic material in the surrounding area, aluminum Wallduct is used in scan rooms. The equipment and control rooms generally use steel Wallduct. Equipment Room Scan Room Control Room Typical MRI Room Layout. Wallduct and Trenchduct Legend Item Catalog No. Description 1 WD10W '-0" [1524mm] Straight Length. 1a CP10-F30 30" [762mm] L Flush Cover Plate. 2 WD10W350-IL Internal Wallduct Elbow. 2a CP10-ILF Internal Wallduct Elbow Cover Flush. 3 WD10W350-HL Horizontal Wallduct Elbow. 3a CP10-HLF Horizontal Wallduct Elbow Cover Flush. 4 WD10W350-T Wallduct T-Unit. 4a CP10-TF Wallduct T-Unit Cover Flush. 5 WD10W350-X Wallduct X-Unit. 5a CP10-XF Wallduct X-Unit Cover Flush. 6 WD10W350-ECF Wallduct End Closure. 7 V12W250H-5 V Style Trenchduct 12" Wide x 2 1/2" Deep [304mm x 63mm]. 8 V12W250H-EC V Style Trenchduct End Closure. 9 V12W250H-LL V Style Trenchduct Horizontal Elbow (Left Hand). 10 V12W-VR10 V Style Trenchduct Vertical Riser. 11 WD10W350-CC/DO Wallduct Cabinet Connector. 12 WD350-CP Corner Partition. 13 WD350-P60 Straight Partition. 14 WD10W350-TUN T-Unit Straight Tunnel. 15 WD10-CPF ccess Cover Plate With Grommet. 16 WD10W350-EL Wallduct External Elbow. 16a CP10W350-ELF Wallduct External Elbow Cover Flush. 17 WD10W350-FST Wallduct Flush to Surface Transition. 18 WD10W350-LTUN T-Unit Left Hand Tunnel. 19 WD10W350-XTUN X-Unit Tunnel. 20 T250HZP-5 Trenchduct Partition. 21 V12W-VL10 Trenchduct Vertical Riser 22 WD10W350-FCCF Flanged Cabinet Connector Flush. 23 WD10W350-SWTS Sweep Surface Tee. 24 WD-10CDO Ceiling Drop Out. 25 WD350-R04 Wallduct Reducer. 26 WD18W350-SWCCS Sweep Cabinet Connector Surface. 27 WD10W350-SES Sweep Elbow Surface. Wallduct can be installed in the wall exposing only the cover plate, or it can be wall mounted exposing the entire surface. Wallduct may also be installed overhead to connect cables/ wires between rooms. Trenchduct can be used in combination with Wallduct as a feeder or for access points in the floor to feed equipment. Diagram below is for illustration only. It does not portray typical installation of products a 4 1a a 18 4a 5 1 5a 26 Cabinet (y Others) Pull ox (y Others) a 17 Wallduct Series Raceway Product Notes To attach Wallduct Series Raceway to Trenchduct, use vertical risers as shown in the current version of ED738. ll field cut openings in Wallduct Series Raceway should be grommeted as needed to protect edges from cutting cables and wires. Order Catalog # FT. Contact factory for availability of other sizes of Wallduct Series Raceway. 2

3 Catalog No./Item odies Straight Wallduct With Removable Cover Plates WD06W " [152mm] odies include two coupling angles and assembly screws. WD10W " [254mm] odies are 5' [1.3m] long and can be field cut to length. WD18W " [457mm] Surface flush covers are 30" [762mm] long. Two covers required per body. See page 10 for wire/cable fill capacity information. Surface Covers CP06-S30 6" [152mm] CP10-S30 10" [254mm] CP18-S30 18" [457mm] CP06-F30 CP10-F30 CP18-F30 Wallduct Series Raceway odies and Covers Ordering Information 8" [203mm] 12" [305mm] 20" [508mm] 30" [762mm] 30" [762mm] 3 1 2" 60" [1524mm] End View (Flush Cover Shown) NOTE: To order aluminum products, add the letter to the beginning of the catalog number. Catalog No./Item Wallduct Series Raceway ody ccessories Ordering Information WD350-P60 Straight Partition Used to separate services. Includes assembly screws for field installation. NOTE: dd the letter in front of Catalog No. for aluminum. Catalog No./Item Wire Retainer WD06-WR 6" [152mm] Used to hold wires in place WD10-WR 10" [254mm] during installation and to close WD18-WR 1 1 2" 18" [457mm] gap between cover plates if more than 1/8" [3.2mm]. Snap in place prior to installing cover plates. [38mm] 60" [1525mm] 3 1/4" [83mm] NOTE: dd the letter in front of Catalog No. for aluminum. WD350-C Coupling ngle Used for connecting two pieces of Wallduct. Includes assembly screws. Two coupling angles included with every straight body assembly " [81mm] 2" [51mm] 1 1 2" [38mm] NOTE: dd the letter in front of Catalog No. for aluminum. WD350-CP 9/16" [14.3mm] 4" [102mm] Corner Partition Used in horizontal elbow to form corner partition. ssembly screws included. Two wire retainers are included with every straight body assembly. 3 1/4" [83mm] NOTE: To order aluminum products, add the letter to the beginning of the catalog number. 3

4 Catalog No./Item Wallduct Series Raceway End Closure Ordering Information Surface End Closures End Closure Used to close off end of WD06W350-ECS 6" [152mm] 6" [152mm] Wallduct run. Includes assembly screws. WD10W350-ECS 10" [254mm] 10" [254mm] WD18W350-ECS 18" [457mm] 18" [457mm] Flush End Closures WD06W350-ECF 6" [152mm] 8" [203mm] WD10W350-ECF 10" [254mm] 12" [305mm] WD18W350-ECF 18" [457mm] 20" [508mm] 1" [25mm] 3 1 2" NOTE: To order aluminum products, add the letter to the beginning of the catalog number. Catalog No./Item odies 45 Elbow Used to change direction WD06W350-HL45 6" [152mm] of Wallduct runs 45 on same plane. Includes one WD10W350-HL45 10" [254mm] pair of coupling angles, one retainer, and assembly WD18W350-HL45 18" [457mm] screws. Complete unit requires one body and one cover plate. Surface Covers CP06-HLS /8" [143mm] CP10-HLS /4" [185mm] CP18-HLS /2" [270mm] CP06-HLF-45 6" [153mm] CP10-HLF /4" [196mm] CP18-HLF-45 11" [280mm] Wallduct Series Raceway Fittings Ordering Information 3 1/2" odies Horizontal Elbow Used to change direction WD06W350-HL 6" [152mm] of Wallduct runs 90 on same plane. Includes one WD10W350-HL 10" [254mm] pair of coupling angles, one retainer, and assembly WD18W350-HL 18" [457mm] screws. Complete unit requires one body and one cover plate. Surface Covers CP06-HLS 7" [178mm] CP10-HLS 11" [279mm] CP18-HLS 19" [482mm] CP06-HLF 8" [203mm] CP10-HLF 12" [305mm] CP18-HLF 20" [508mm] 3 1 2" odies Internal Elbow Used to connect vertical and WD06W350-IL 6" [152mm] horizontal run at 90 when cover plates are on WD10W350-IL 10" [254mm] inside of run. Includes one pair of coupling WD18W350-IL 18" [457mm] angles, wire retainer, and assembly screws. Complete unit requires one elbow body and Surface Covers one cover plate. CP06-ILS 6" [152mm] CP10-ILS 10" [254mm] CP18-ILS 18" [457mm] CP06-ILF 8" [203mm] CP10-ILF 12" [305mm] CP18-ILF 20" [508mm] NOTE: To order aluminum products, add the letter to the beginning of the catalog number. 4

5 Catalog No./Item Wallduct Series Raceway Fittings Ordering Information odies External Elbow Used to connect vertical and WD06W350-EL 6" [152mm] horizontal run at 90 angle when cover plates are WD10W350-EL 10" [254mm] on outside of run. Includes attached coupling angles, WD18W350-EL 18" [457mm] wire retainer, and assembly screws. Complete unit requires one elbow body and two cover plates. Surface Covers Flush and surface cover catalog numbers include CP06W350-ELS 6" [152mm] two covers. CP10W350-ELS 10" [254mm] CP18W350-ELS 18" [457mm] CP06W350-ELF 8" [203mm] CP10W350-ELF 12" [304mm] CP18W350-ELF 20" [508mm] odies Internal External Elbow Internal elbow used to WD06W350-IEL 6" [152mm] change direction 90 while also allowing for a change WD10W350-IEL 10" [254mm] in coverplate orientation. Complete unit requires one WD18W350-IEL 18" [457mm] body and one cover plate. Surface Covers CP06W350-IELS 6" [152mm] CP10W350-IELS 10" [254mm] CP18W350-IELS 18" [457mm] CP06W350-IELF 8" [203mm] CP10W350-IELF 12" [304mm] CP18W350-IELF 20" [508mm] odies T-Unit Used to connect a second run of Wallduct WD06W350-T 6" [152mm] at 90 angle to first run. Includes one pair of coupling WD10W350-T 10" [254mm] angles, one wire retainer, and assembly screws. WD18W350-T 18" [457mm] Complete unit requires one body and one cover plate. Surface Covers CP06-TS 7" [178mm] CP10-TS 11" [279mm] CP18-TS 19" [482mm] CP06-TF 8" [203mm] CP10-TF 12" [304mm] CP18-TF 20" [508mm] 3 1/2" WD10W350-TUN 11 7/8" [301mm] T-Unit Straight Tunnel Provides 3" [76mm] straight WD18W350-TUN 19 7/8" [504mm] through compartment for one service with crossover for a second service. ssembly screws included. NOTE: Not available for 6" [162mm] wide Wallduct. 3" [76mm] 3 1 4" [83mm] NOTE: To order aluminum products, add the letter to the beginning of the catalog number. 5

6 Catalog No./Item Wallduct Series Raceway Fittings Ordering Information (Continued) Right Hand Tunnel Used in conjunction WD10W350-RTUN 7 7/8" [200mm] with straight partition to form a 90 angle WD18W350-RTUN 15 7/8" [403mm] 3 1 4" 3" [76mm] compartment with crossover in T-Unit. ssembly screws included. [83mm] NOTE: Not available for 6" [162mm] wide Wallduct. 3" [76mm] " Left Hand Tunnel Used in conjunction WD10W350-LTUN 7 7/8" [200mm] with straight partition to form a 90 angle WD18W350-LTUN 15 7/8" [403mm] 3 1 4" 3" [76mm] compartment with crossover in T-Unit. ssembly screws included. [83mm] NOTE: Not available for 6" [162mm] wide Wallduct. 3" [76mm] WD10W350-3TUN WD18W350-3TUN ridge Partitions Tunnel T-Unit Tunnel Provides three equal compartments for separation of services in T-Unit. ssembly screws included. Purchase partition Catalog No. WD350-P60 separately to complete installation. Partitions Partitions NOTE: Not available for 6" [162mm] wide Wallduct. odies X-Unit Used to connect two intersecting runs WD06W350-X 6" [152mm] of Wallduct at a 90 angle. Includes one pair of WD10W350-X 10" [254mm] coupling angles, one wire retainer, and assembly WD18W350-X 18" [457mm] screws. Complete unit requires one body and one cover plate. Surface Covers CP06-XS 8" [203mm] CP10-XS 12" [304mm] CP18-XS 20" [508mm] CP06-XF 8" [203mm] CP10-XF 12" [305mm] CP18-XF 20" [508mm] 3 1/2" X-Unit Crossover Used to provide a 90 WD10W350-XTUN 6 7/8" [174mm] 1" angle 3" [76mm] compartment with crossover [25mm] WD18W350-XTUN 14 7/8" [377mm] in X-Unit. ssembly screws included. NOTE: Not available for 6" [162mm] wide Wallduct. 3" [76mm] 3 1 4" [83mm] NOTE: To order aluminum products, add the letter to the beginning of the catalog number. 6

7 Catalog No./Item WD10W350-3TUN WD18W350-3TUN Wallduct Series Raceway Fittings Ordering Information (Continued) ridge Partition Tunnel X-Unit Tunnel Provides three equal compartments for separation of services in X-Unit. ssembly screws included. Partition Partition Partitions Two tunnels shown. Purchase partition, Catalog No. WD350-P60 separately to complete installation. Complete X-Unit assembly requires two X-unit tunnel units. NOTE: Not available for 6" [162mm] wide Wallduct. Sweep Elbow Used to connect vertical and WD06W350-SES 6" [152mm] horizontal runs of Wallduct at a 90 angle with WD10W350-SES 10" [254mm] a 45 internal sweep radius. Includes one pair WD18W350-SES 18" [457mm] of coupling angles and assembly screws. For 14" partition use Catalog No. WD350-PSE Series. [356mm] 3 1 2" NOTE: Not available in flush cover version. 14" [356mm] 3 1 2" WD350-PSE 3.878" [98.50mm] Internal Sweep Elbow Partition Used with past #WDXWX-SES to partition elbow " [253.67mm] 3 1/2" [88.90mm] Reducer Coupling Used to reduce Wallduct WD350-RO2 2" [51mm] width by 4" [102mm] or 8" [204mm]. Two piece WD350-RO4 4" [102mm] unit allows 18" [457mm] wide Wallduct to be reduced to 10" [254mm] wide, or 10" {254mm] wide to be reduced to 6" [152mm] wide. Can also be used on other sizes as needed. ssembly screws included. Cabinet Connector/Drop Out Used to connect WD06W350-CC/DO 5 3/4" [146mm] ends of Wallduct run to panel/cabinet. lso used WD10W350-CC/DO 9 3/4" [247mm] to connect two runs of Wallduct at a 90 angle WD18W350-CC/DO 17 3/4" [450mm] when one run butts up to the bottom or top of the other. ssembly screws included. 1" 25mm] 3 1 4" [82mm] NOTE: To order aluminum products, add the letter to the beginning of the catalog number. 7

8 6 Catalog No./Item Wallduct Series Raceway ccessories Ordering Information Sweep Cabinet Connector For use WD06W350-SWCCS 6" [152mm] with GE medical equipment. ttaches to 6" x WD10W350-SWCCS 10" [254mm] 3 1/2" [152mm x 89mm], 10" x 3 1/2" [254mm x WD18W350-SWCCS 18" [457mm] 89mm], or 18" x 3 1/2" [457mm x 89mm] horizontal surface Wallduct " [64mm] NOTE: Not available in aluminum " [266mm] 8" [203mm] Transition Used to form a junction between WD06W350-FST 6" [152mm] 8" [203mm] flush and surface Wallduct at a 90 angle. WD10W350-FST 10" [254mm] 12" [304mm] Includes assembly screws, clips, one wire WD18W350-FST 18" [457mm] 20" [508mm] retainer and two coupling angles. 1" [25mm] Duct ody Surface Cover Plate Duct ody Flush Surface Covers ccess Cover Plate Two-piece cover with WD06-CPS 6" [152mm] grommeted hole in center. Can be installed at any WD10-CPS 10" [254mm] location by match drilling eight holes in duct body WD18-CPS 18" [457mm] flanges and attaching speed nuts. Includes assembly screws and grommet. Use 5/16" [7.9mm] diameter drill for speed nuts. WD06-CPF 7" [178mm] WD10-CPF 11" [279mm] WD18-CPF 19" [482mm] 6" [152mm] 12" [305mm] 3"x 8" [76mm x 203mm] Hole. For 6" [152mm] cess Plate, hole size is 3" x 4" [76mm x 102mm] Sweep Tee Sweep Tee Used to connect horizontal and WD06W350-SWTS 6" [152mm] vertical runs of Wallduct at a 90 angle with WD10W350-SWTS 10" [254mm] sweep radius. Includes one pair of coupling WD18W350-SWTS 18" [457mm] angles and assembly screws. 10" [254mm] NOTE: Not available in flush cover version. 10" [254mm] NOTE: To order aluminum products, add the letter to the beginning of the catalog number. 8

9 Catalog No./Item Wallduct Series Raceway ccessories Ordering Information (Continued) Flanged Connector Flanged Cabinet Connector Used to connect WD06W350-FCCS 16" [406mm] end of Wallduct run to panel cabinet. ssembly WD10W350-FCCS 22" [559mm] screws included. Use.166" [4.2mm] diameter WD18W350-FCCS 24" [610mm] (#19 drill) for assembly. WD06W350-FCCF 18" [4570mm] NOTE: Not available in aluminum. WD10W350-FCCF 24" [610mm] 6" WD18W350-FCCF 26" [660mm] [152mm] Ceiling Drop Out Ceiling Drop Out Used to drop cables and WD-10CDO 4" [102mm] to 5 3/4" [146mm] wires from Wallduct in ceiling to imaging WD-10CDOD 5 1/2" [140mm] to 7 1/4" [184mm] equipment. vailable in 10" [254mm] width only. Units have adjustable depth. 10" [254mm] NOTE: To order aluminum products, add the letter to the beginning of the catalog number. Part No: Wallduct Series Raceway Replacement Hardware Ordering Information Wallduct Replacement Hardware Hardware bag with twelve (12) 10/32 x 7/8" pan head screws Wallduct Replacement Hardware Hardware bag with eight (8) 10/32 x 1/4" pan head screws. Part No: FT Wallduct Grommet pplied to edges of Wallduct and fittings where cables egress to protect against damage to cable insulation. Packed 100' of grommet per unit Wallduct Replacement Hardware Hardware bag with twelve (12) cover clips. Wallduct is ideal for use in medical scan rooms. 9

10 Wallduct Series Raceway Wire Fill Capacity Use these steps to determine wire fill capacity in Wallduct. Step 1: Determine the internal raceway area by multiplying the overall width by the overall depth (subtract material thickness). Example: ssume a raceway 10" wide by 4" deep. Subtract the material thickness from each dimension (see below). This results in internal raceway dimensions of 9.844" (10" ") wide by 3.922" (4" "). The internal area for this raceway size would be 38.6 sq. in. (9.844" x 3.922"). Deduct for Deduct for Maximum Raceway Material Material Width (In.) Thickness Thickness Left & Right (ottom) 6" 18" Steel 0.156" 0.078" 20" 30" Steel 0.216" 0.108" 6" 18" luminum 0.200" 0.100" 20" 30" luminum 0.250" 0.125" Step 2: Determine the number of conductors allowed inside the raceway for a given type and size (types THHN and THWN are shown in Table 1) of the conductor by multiplying the internal area (calculated in Step 1) by the number of conductors allowed per square inch (see table 1). Example: Calculate how many No. 6 WG (THHN) conductors you are allowed to place in the 10" x 4" raceway in Step 1 at 40% wire fill capacity. Multiply the internal area of the raceway by the maximum number of wires allowed per square inch, from table 1. This results in 304 allowable cables (38.6 sq. in. x 7.89). 20% fill should be used for systems utilizing fittings that have sharp 90 turns. The derating factors of NEC article ()(2)(a) shall apply to conductors installed if the amount of current-carrying conductors exceeds 30 in number, or the sum of the crosssectional area of all conductors exceeds 20% of the interior cross-sectional area of the raceway. When tunnels are utilized, the internal cross-sectional area must be further reduced by 50%. When partitions are utilized, the internal cross-sectional area must be calculated for each individual compartment. Table 1 Steel Wallduct Wire Fill Capacities for Power WIRE SIZE DIMETER RE (In 2 ) 40% FILL 20% FILL WG In. [mm] Sq. In. [Sq. mm] (Per Sq. In.) (Per Sq. In.) [2.8] [6.3] [3.3] [8.6] [4.2] [13.6] [5.5] [23.6] [6.5] [32.7] [8.2] [53.2] [8.9] [62.8] [9.8] [74.7] Table 2 Steel Wallduct Wire Fill Capacities for Data/Communications DIMETER RE (In 2 ) 40% FILL 20% FILL CLE/WIRE SIZE In. [mm] Sq. In. [Sq. mm] (Per Sq. In.) (Per Sq. In.) UNSHIELDED 4-Pair, Cat 5e [5.6] [24.6] 10 5 TWISTED PIR 4-Pair, Cat [6.4] [31.7] 14 7 TELEPHONE 2-Pair, 24 WG [3.5] [9.9] Pair, 24 WG [4.8] [18.2] Pair, 24 WG [10.4] [85.2] 3 1 COXIL RG58/U [4.9] [19.2] 13 6 RG59/U [6.1] [29.6] 9 4 RG6/U [6.8] [36.9] 7 3 SHIELDED TYPE [9.9] [77.0] 3 1 TWISTED PIR TYPE [11.8] [109.5] 2 1 TYPE [6.2] [30.4] 0 4 FIER OPTIC 2-STRND [4.6] [16.4] STRND [4.8] [15.3] STRND [5.3] [22.3] 11 5 FIER ZIP CORD [2.8] [6.1] NOTE: Wire diameters can vary depending on manufacturer. Verify diameter and adjust fill capacities as required. Values are per one square inch of Wallduct area. 10

11 Wallduct Series Raceway Take-Off Sheet Project Name: Location: 1. Enter the correct size and width of each part number (WD"6"W"350"-60). 2. Provide correct covers, dividers, tunnels, hardware, fittings as required. 3. Provide correct part number of covers per bodies of WallDuct (two covers per WallDuct body). WD W -60 ody Run # WD W -60 ody Run # CP W -S30 Surface Cover CP W -S30 Surface Cover CP W -F30 Flush Cover CP W -F30 Flush Cover WD -P60 Straight Partition WD -P60 Straight Partition WD -C Coupling ngle WD -C Coupling ngle WD -WR Wire Retainer WD -WR Wire Retainer WD -CP Corner Partition WD -CP Corner Partition WD W -ECS Surface End Closure WD W -ECS Surface End Closure WD W -ECF Flush End Closure WD W -ECF Flush End Closure WD W -HL45 45 Elbow ody WD W -HL45 45 Elbow ody CP -HLS Elbow Surface Cover CP -HLS Elbow Surface Cover CP -HLF Elbow Flush Cover CP -HLF Elbow Flush Cover WD W -HL Horizontal Elbow ody WD W -HL Horizontal Elbow ody CP -HLS Horizontal Surface Cover CP -HLS Horizontal Surface Cover CP -HLF Horizontal Flush Cover CP -HLF Horizontal Flush Cover WD W -IL Internal Elbow ody WD W -IL Internal Elbow ody CP -ILS Internal Elbow Surface Cover CP -ILS Internal Elbow Surface Cover CP -ILF Internal Elbow Flush Cover CP -ILF Internal Elbow Flush Cover WD W -EL External Elbow ody WD W -EL External Elbow ody CP W -ELS External Elbow Surface Cover CP W -ELS External Elbow Surface Cover CP W -ELF External Elbow Flush Cover CP W -ELF External Elbow Flush Cover WD W -T T-Unit ody WD W -T T-Unit ody CP -TS T-Unit Surface Cover CP -TS T-Unit Surface Cover CP -TF T-Unit Flush Cover CP -TF T-Unit Flush Cover WD W -TUN Straight Tunnel WD W -TUN Straight Tunnel WD W -RTUN Right Hand Tunnel WD W -RTUN Right Hand Tunnel WD W -LTUN Left Hand Tunnel WD W -LTUN Left Hand Tunnel WD W -3TUN T-Unit Tunnel WD W -3TUN T-Unit Tunnel WD W -X X-Unit ody WD W -X X-Unit ody CP -XS X-Unit Surface Cover CP -XS X-Unit Surface Cover CP -XF X-Unit Flush Cover CP -XF X-Unit Flush Cover WD W -XTUN X-Unit Crossover WD W -XTUN X-Unit Crossover WD W -3TUN X-Unit Tunnel WD W -3TUN X-Unit Tunnel WD W -SES Sweep Elbow WD W -SES Sweep Elbow WD -RO2 Reducer Coupling WD -RO2 Reducer Coupling WD -RO4 Reducer Coupling WD -RO4 Reducer Coupling WD W -CC/DO Cabinet Connector Drop Out WD W -CC/DO Cabinet Connector Drop Out WD W -SWCCS Sweep Cabinet Connector WD W -FST Transition WD -CPS Surface ccess Cover Plate WD -CPF Flush ccess Cover Plate WD W -SWTS Sweep Tee WD W -FCCS Flanged Cabinet Connector WD W -FCCF Flanged Cabinet Connector WD-10CDO Ceiling Drop Out WD-10CDOD Ceiling Drop Out WD W -SWCCS Sweep Cabinet Connector WD W -FST Transition WD -CPS Surface ccess Cover Plate WD -CPF Flush ccess Cover Plate WD W -SWTS Sweep Tee WD W -FCCS Flanged Cabinet Connector WD W -FCCF Flanged Cabinet Connector WD-10CDO Ceiling Drop Out WD-10CDOD Ceiling Drop Out 11

12 NOTES NOTE: ll brand and product names referenced in this document are registered trademarks or trademarks of their respective holders. NOTE: The paper used to print this document is an environmentally responsible paper with 10% post consumer waste, with FSC and SFI Chain of Custody certifications, Lacey ct complaint. 100% of the electricity used to manufacture Flo sheets is generated with Green-e certified renewable energy. ED737R11 Updated May 2016 For latest specs visit Copyright 2016 Legrand ll Rights Reserved Electrical Wiring Systems 60 Woodlawn Street West Hartford, CT Phone: Y.LEGRND ( ) pplewood Crescent Vaughan, Ontario L4K 44 Phone: