Resource RFB Series Floor Boxes

Size: px

Start display at page:

Download "Resource RFB Series Floor Boxes"

Randall Todd Maxwell
6 years ago
Views:

Resource RF Series Floor oxes Recessed Floor oxes for Wood & oncrete Floors Wiremold Resource RF Series of Floor oxes are versatile activation solutions that provide power, communication and/or audio

1 Resource RF Series Floor oxes Recessed Floor oxes for Wood & oncrete Floors Wiremold Resource RF Series of Floor oxes are versatile activation solutions that provide power, communication and/or audio video services to open space areas or directly to workstations. RF Series Floor oxes are now available with new FloorPort ctivation overs as well as Evolution Series Poke- Thru overs for the RF6E and RF6E-OG Floor oxes. These covers incorporate TopGuard protection to prevent water, dirt, and debris from entering the power and communication device compartments. FloorPort ctivation overs are UL Listed to U.S. and anadian safety standards for tile, terrazzo, carpet, and wood floors. RF Series Floor oxes have many applications, some of which include schools, financial institutions, commercial office buildings, and residences. /V INTEGRTION RF4 Series Floor ox with the new FloorPort ctivation over. n Independent wiring compartments allow capacity for up to six duplex receptacles and/or communication services. Reduces overall cost by providing for most cabling requirements. n The RF4 has three versions for various applications. cast iron version to meet on grade requirements, a steel version to reduce installation cost on above grade floors, and a shallow steel version that provides flexibility with varying concrete depths. n Fully adjustable before and after the concrete pour. Labor savings by adapting to various pour depths and conditions. n Range of conduit sizes. llows for most conduit schemes, even feed through capability, which saves time and money during installation. n Triple service boxes. ccommodates power, communication and/or audio/video devices which reduces the need for multiple boxes. n ccepts round Evolution Series overs. RF6E Series Floor ox has been designed to accept the round 8" Evolution Series overs increasing the ability to match aesthetics throughout the building. n Shallow version allows pass-around tunneling. Flexibility in design to have adjacent compartments wired together. F E T U R E S & E N E F I T S n Redesigned FloorPort ctivation overs. Provides TopGuard protection from water, dirt and debris and added strength and durability. Now available in brushed aluminum and plated brass finishes for better aesthetics. n Wide variety of mounting brackets. an adapt to most power and communication needs. Reduces overall life cycle cost. n RF6E and RF6E-OG available for bare concrete and terrazzo floors. y using RF6E-TR Ring (sold separately) these boxes can be installed into bare concrete or terrazzo floors with a clean, aesthetic finish. n UL Listed to U.S. and anadian safety standards for tile, terrazzo, carpet and wood floors. n Datacom connectivity options. ccepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point-of-use. wide selection of data and adapter options are available for use with Ortronics TracJack and Series II devices. R F 2, R F 6 d d i t i o n a l Fe a t u re s & e n e f i t s n Installs in both concrete and wood floors. Provides the first recessed wood floor box for both commercial and residential applications. n Lightweight slab-on-grade version. Special fusion-bonded epoxy corrosion resistant paint finish allows for slab-on-grade use without the weight of cast iron material. n ccepts Floorport ctivation overs. llows a consistent aesthetic finish for the RF4, RF2 & RF6 Series Recessed Floor oxes. Sold by: Protection from water, dirt, and debris. Toll Free: (877) ED771R16 Updated November 2009 For latest specs visit

2 RF2 RF2 Series Multiservice Steel Recessed Floor ox Ordering Information 3 7/16" [87mm] Two-ompartment ox For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle, mounting plate, and one (1) communication mounting plate (RF22). Other device plates sold separately. 6 [165mm] 13 1/8" [333mm] RF2-SS Two-ompartment Shallow Stamped Steel Floor ox 2 5/8" For use in either concrete or wood floors. Fully [67mm] adjustable with tunnel compartment. Supplied with one (1) duplex receptacle, mounting plate, and one (1) communication mounting plate (RF22). Other device plates sold separately. 6 [165mm] 13 1/8" [333mm] RF2-OG 6 [165mm] 13 1/8" [333mm] 3 7/16" [87mm] Two-ompartment ox For use On Grade. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle, mounting plate, and one (1) communication mounting plate (RF22). Other device plates sold separately. NOTE: RF2-OG for on-grade applications is painted with a fusion-bonded epoxy designed for use on metal reinforcement bar and related accessories before encapsulating in concrete. ompartment apacities/ Knockout Locations & Sizes RF2 & RF2-OG RF2-SS 50.2 cu. in. [822.6 ml] Each Side Top View 38.0 cu. in. [622.7 ml] Each Side Top View ottom KO ottom KO ottom KO ottom KO ottom KO ottom KO ottom KO ottom KO 2

RF2DP RF2 RF2GFI RF22 RF2 Series Multiservice Steel Recessed Floor ox ccessories Internal Duplex Receptacle racket ccepts standard 15 mp & 20 mp Duplex Receptacles.

3 RF2DP RF2 RF2GFI RF22 RF2 Series Multiservice Steel Recessed Floor ox ccessories Internal Duplex Receptacle racket ccepts standard 15 mp & 20 mp Duplex Receptacles. NOTE: For RF2 Series Internal lank racket Plate used to close off unused Gangs. NOTE: For RF2 Series Internal GFI or Decorator Style Receptacle Opening ccepts standard GFI or Decorator Style Receptacles, ommunication or udio/video Devices. NOTE: For RF2 Series Internal ommunication racket Includes two (2) adapters to accept Wiremold M Series Open System communication inserts (sold separately). NOTE: For RF2 Series RF2RT RF2EXT RF2-P Internal ommunication racket Includes Two (2) adapters to accept Ortronics TracJack devices, and Two (2) adapters to accept Ortronics Series II devices (sold separately). NOTE: For RF2 Series Internal udio Video racket ccepts two (2) Extron Electronics MP Series devices. (Sold separately) NOTE: For RF2 Series Internal udio Video racket ccepts Two (2) Extron Electronics P Series devices. (Sold separately) NOTE: For RF2 Series RF2 Series Floor oxes with FloorPort ctivation overs. 3

4 RF4 RF4 Series Multiservice Steel Recessed Floor ox Ordering Information 10" [254mm] 5 7/8" [149mm] Four-ompartment ombination ox 12 L x 10" W x 3 7/16" D [324mm x 254mm x 87mm]. Fully adjustable with tunnel compartment and two receptacle brackets. Tunneling from end power compartment to end power compartment only. ommunication brackets not included. See ccessories. NOTE: Only for use in concrete floors. 4 [121mm] 12 [254mm] 3 7/16" [87mm] RF4-4D 10" [254mm] Four-ompartment ox Includes four duplex receptacle brackets. 12 L x 10" W x 3 7/16" D [324mm x 254mm x 87mm]. Fully adjustable. Tunneling from adjacent or opposite compartments only, (not cross compartments). Tunneling can be set to feed all four compartments from one conduit in a single-service application. NOTE: Only for use in concrete floors. 12 [324mm] 3 7/16" [87mm] NOTE: ll boxes and activations are sold separately. RF4 Series ompartment apacities and Knockout Locations and Sizes 32.3 cu in. [529 ml] (RF4* Data Only) 16.4 cu in. [269 ml] Feed Through in This Direction Only cu in. [820 ml] (RF4* Data Only) 16.4 cu in. [269 ml] FOR RF4 No feed through to opposite data compartment on RF4. Indicates ottom KO. 4

RF- Internal lank racket Power compartments only. Used to close off unused gangs. RF-DR Internal Duplex racket ccepts standard 15 mp & 20 mp Duplex Receptacles.

5 RF- Internal lank racket Power compartments only. Used to close off unused gangs. RF-DR Internal Duplex racket ccepts standard 15 mp & 20 mp Duplex Receptacles. RF-GFI RF4 Series Multiservice Steel Recessed Floor ox ccessories Internal GFI racket ccepts standard GFI or Decorator Style Receptacles, ommunication or udio/video Devices. RF4-LP ommunication racket ctivate low profile adapter included. Wiremold M Series Open System inserts sold separately. RF4-LPS2 ommunication racket Ortronics Series II Low profile adapter included. DT-2-2 ommunication racket Two 2 size Pass & Seymour ctivate adapters included. Wiremold M Series Open System inserts, sold separately. DT-2-4TKO ommunication racket Four (4) RJ keystone opening knockouts. Use as blank plate or for up to four (4) RJ openings. DT-2-DT ommunication racket With IM Type II opening (devices not included). DT-2-SD ommunication racket With duplex opening (devices not included). RF-WT Opening dimension is 9/16" x [ 14.3mm x 19.1mm]. onversion Kit To convert the RF4 ox to a RF4-4D ox. WT-2- ommunication racket One 2 size Pass & Seymour ctivate adapter included. Wiremold M Series Open System inserts sold separately. WT-2-RT ommunication racket Ortronics 2TJ TracJack and S2 Series II adapters included. DT-2-2RT ommunication racket Ortronics 2TJ TracJack and S2 Series II adapters included. dditional configurations available. Please consult your Wiremold Field Sales Representative for more information. WT-P Internal udio Video racket ccepts two (2) Extron Electronics P Series Devices. (Sold separately) NOTE: For RF4-4D Series WT-MP Internal udio Video racket ccepts two (2) Extron Electronics MP Series Devices. (Sold separately) NOTE: For RF4-4D Series RF4 Series Floor ox with FloorPort ctivation over. 5

6 RF4 Series Multiservice ast Iron Recessed Floor ox Ordering Information RF4-I-1 Four-ompartment ast Iron ox 11 7/8" [302mm] 14 L x 11 7/8" W x 3 7/16" D [368mm x 302mm 5 1/8" x 87mm]. Fully adjustable with tunnel compartment and [130mm] two receptacle brackets. Feed through from adjacent or opposite compartments only, (not cross compartments). ommunication brackets not included. See ccessories. 5 1/8" [130mm] 3 7/16" 14 [87mm] [368mm] NOTE: Only for use in concrete floors. ll boxes and activations are sold separately. RF4 Series ompartment apacities and Knockout Locations and Sizes 27.0 cu in. [443 ml] 36.0 cu in. [590 ml] 36.0 cu in. [590 ml] 27.0 cu in. [443 ml] For RF4-I-1 IHT-D IH/LT- RF4 Series Multiservice ast Iron Floor ox ccessories Internal Duplex Receptacle racket ccepts standard 15 mp & 20 mp Duplex Receptacles. Internal lank racket Used to close off unused Gangs. ILT-2-RT ommunication racket ommunication bracket with Ortronics 2TJ TracJack and S2 Series II adapters included. ccepts Ortronics workstation connectivity outlets and modular inserts. IHT-GFI Internal GFI Device racket ccepts standard GFI or Decorator Style Receptacles, ommunication or udio/video Devices. ILT-2 ommunication racket ommunication bracket with two 2 size ctivate adapters included. ccepts Wiremold M Series Open System communication modules and Pass & Seymour ctivate Series inserts, sold separately. ILT-4TKO ommunication racket ommunication bracket with four (4) RJ opening knockouts. Use as blank plate or for up to four RJ openings. NOTE: Opening dimension is 9/16" x [14.3mm x 19.1mm]. dditional configurations available. Please consult your Wiremold Field Sales Representative for more information. 6

7 RF4 Series Multiservice Shallow Steel Recessed Floor ox Ordering Information RF4-SS Four-ompartment Shallow Stamped Steel ox 10" 13 5/8" L x 10" W x 2 7/16" D [346mm x 254mm x 62mm]. [254mm] 5 7/8" Fully adjustable with tunnel compartment and two [149mm] receptacle brackets. Feed through tunneling to adjacent compartments only. Tunneling can be set to feed all four compartments from one conduit in a single-service application. ommunication brackets not included. See ccessories. 13 5/8" [346mm] 4 [121mm] 2 7/16" [62mm] NOTE: Only for use in concrete floors. ll boxes and activations are sold separately cu in. [511 ml] RF4 Series ompartment apacities/ Knockout Locations & Sizes 15.7 cu. in. [257 ml] 15.7 cu in. [257 ml] 31.2 cu in. [511 ml] FOR RF4-SS Indicates ottom KO RF--SS RF4 Series Multiservice Shallow Steel Floor ox ccessories Internal lank racket Used to close off unused Gangs. RF-2-SSRT ommunication racket Ortronics 2TJ TracJack and S2 Series II adapters included. RF-R-SS RF-GFI-SS Internal Duplex Receptacle racket ccepts standard 15 mp & 20 mp Duplex Receptacles. Internal GFI Receptacle racket ccepts standard GFI & Decorator style Receptacles ommunication or udio/video Devices. RF-2-SS Internal racket Two Pass & Seymour ctivate adapters included. Wiremold M Series Open System inserts sold separately. dditional configurations available. Please consult your Wiremold Field Sales Representative for more information. RF-4TKO-SS Internal racket Four RJ Keystone opening knockouts. Use as blank plate or for up to four RJ openings. NOTE: Opening dimension is 9/16" x [14.3mm x 19.1mm]. RF4-SS-P Internal udio Video racket ccepts two (2) Extron Electronics P Series Devices. (Sold separately) NOTE: For RF4-SS Series RF4-SS-MP Internal udio Video racket ccepts two Extron Electronics MP Series Devices. (Sold separately) NOTE: For RF4-SS Series 7

8 RF6 RF6 Series Multiservice Steel Recessed Floor ox Ordering Information 14" [355mm] 14 5/8" [371mm] 3 1/4" [82.55mm] Six-ompartment ox For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with two (2) duplex mounting plates, two (2) communication mounting plates (RF62), and (2) blank mounting plates. Other plates sold separately. RF6-OG 14" [355mm] 14 5/8" [371mm] 3 1/4" [82.55mm] Six-ompartment On-Grade ox For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with two (2) duplex mounting plates, two (2) communication mounting plates (RF62), and (2) blank mounting plates. Other plates sold separately. RF6E Six-ompartment ox For use in concrete floors. For use with the round Evolution cover. Fully adjustable with tunnel compartments. Supplied with two (2) duplex mounting plates. Other plates sold separately. RF6E-OG Six-ompartment On-Grade ox For use in concrete floors. For use with the round Evolution cover. Fully adjustable with tunnel compartments. Supplied with two (2) duplex mounting plates. Other plates sold separately. RF6 Series ompartment apacities/knockout Locations & Sizes Side Knockout Locations ottom Knockout Locations ompartment Wire and ommunication ompacities ompartment ompartment ompartment D ompartment D ompartment ompartment KNOKOUTS = Side KO = Side KO = Side KO Feed through is accomplished through removable plugs. KNOKOUTS = ottom KO = ottom KO OMPRTMENT PITIES = 52 in 3 [852ml] D = 23 in 3 [376ml] 8

RF6 Series Multiservice Steel Recessed Floor ox ccessories RF6DP Internal Duplex Receptacle racket ccepts standard 15 & 20 mp Duplex Receptacles.

RF6 Internal lank racket loses off unused gangs. RF6EXT Internal udio Video racket ccepts three (3) Extron Electronics MP Series devices (sold separately).

9 RF6 Series Multiservice Steel Recessed Floor ox ccessories RF6DP Internal Duplex Receptacle racket ccepts standard 15 & 20 mp Duplex Receptacles. RF6RT Internal ommunication racket Includes one (1) adapter to accept Ortronics TracJack devices, and one (1) adapter to accept Ortronics Series II devices (sold separately). RF6 Internal lank racket loses off unused gangs. RF6EXT Internal udio Video racket ccepts three (3) Extron Electronics MP Series devices (sold separately). RF6GFI RF6S1 Internal GFI or Decorator Style Receptacle Opening ccepts standard GFI & Decorator Style Receptacles, ommunication or udio/video Devices. Internal Single Receptacle racket Receptacle opening 1 3/8" [35mm]. RF62 Internal ommunication racket Includes two (2) adapters to accept Wiremold M Series Open System communication inserts (sold separately). RF6S2 Internal Single Receptacle racket Receptacle opening 1 9/16" [40mm]. RF6-P Internal udio Video racket ccepts two (2) Extron Electronics P Series Devices. (Sold separately) RF6E-TR are oncrete & Terrazzo Ring Nonmetallic ring for use with bare concrete and terrazzo floor applications. NOTE: Only for use on RF6E and RF6E-OG Floor oxes. RF6 Floor ox with FloorPort ctivation over and RF6E Floor ox with Evolution Series over. 9

10 FloorPort Series over ssemblies for RF2, RF4 & RF6 Series Floor oxes FPTK utout over ssembly FPTS Flanged cover for use in tile or FPTNK carpet installation. Die-cast FPTL aluminum assembly available in FPTGY black (K), bronze (Z), brass (S), nickel (NK), gray (GY), or brushed aluminum (L). Insert in lid allows for carpet or tile cutouts to match finished floor. FPTK lank over ssembly FPTZ Flanged cover for use in tile or FPTS carpet installation. Die-cast FPTNK aluminum assembly available in FPTL black (K), bronze (Z), brass (S), FPTGY nickel (NK), gray (GY), or brushed aluminum (L). Lid area is flush with the finished floor, no cutouts provided. FPTK utout over ssembly FPTZ Flangeless cover for use in tile FPTS installation. Die-cast aluminum FPTNK assembly available in black (K), FPTL bronze (Z), brass (S), nickel (NK), FPTGY gray (GY), or brushed aluminum (L). Insert in lid allows for tile cutouts to match finished floor. FPTK lank over ssembly FPTZ Flangeless cover for use in tile FPTS installation. Die-cast aluminum FPTNK assembly available in black (K), FPTL bronze (Z), brass (S), nickel (NK), FPTGY gray (GY), or brushed aluminum (L). Lid area is flush with the finished floor, no cutouts provided. FPFFTK Furniture Feed over ssembly FPFFTZ Flanged cover for use in tile or FPFFTS carpet installation. Die-cast FPFFTNK aluminum assembly available in FPFFTL black (K), bronze (Z), brass (S), FPFFTGY nickel (NK), gray (GY), or brushed aluminum (L). Provided with one trade size screw plug for power or communication type cabling and one combination and 2" trade size screw plug for communication type cabling. llows for feeding both power and communication cabling. FPFFTK Furniture Feed over ssembly FPFFTZ Flangeless cover for use in tile FPFFTS installation. Die-cast aluminum FPFFTNK assembly available in black (K), FPFFTL bronze (Z) brass (S), nickel (NK), FPFFTGY gray (GY), or brushed aluminum (L). Provided with one trade size screw plug for power or communication type cabling and one combination and 2" trade size screw plug for communication type cabling. llows for feeding both power and communication cabling. RFKIT RFIKIT arrier Kit arrier kit used to separate power and communication wires in partition feed covers. Supplied with base and three extensions to adjust to cover height. Kit should be used on RF4 and RF4-SS Floor oxes. Kits are sold separately. arrier Kit arrier kit used with RF4-I Floor oxes. Kits are sold separately. Load apacities for FloorPort over ssemblies atalog Maximum Load Numbers in Pounds FPT 1000 FPT 750 FPFFT 1000 FPT 1000 FPT 750 FPFFT 1000 NOTE: Load applied through a 2" [51mm] mandrel in center of service fitting. NOTE: Loads above are static loads only and do not pertain to rolling loads. RF6KIT arrier Kit arrier kit used to separate power and communication wires in partition feed covers. FloorPort Partition Feed overs sold separately. NOTE: For use with RF6 Series 10

11 Evolution Series over ssemblies for RF6E & RF6E-OG Floor oxes 8TGY* Surface Style over ssembly 8TK* Die-cast aluminum cover assembly. 8TS* over assembly is available in the 8TZ* following finishes: painted black 8TNK* (K), painted gray (GY), nickel (NK), brass (S), and bronze (Z). 8T Series over ssemblies designed for use with 8ST and 8STP Poke-Thru Stem ssemblies. 8TS TILE Shim Used for floor coverings greater than 5/16" [7.9mm]. The 8TS will allow the top surface of the cover to be flush with the finished floor. Includes: two (2) 1/8" [3.2mm] thick shims and two (2) 1/16" [1.6mm] thick shims. Up to a total of 3/8" [9.5mm] of adjustment. 8TGY* Flush Style over ssembly 8TK* Die-cast aluminum cover assembly. 8TS* over assembly is available in the 8TZ* following finishes: painted black 8TNK* (K), painted gray (GY), nickel (NK), brass (S), and bronze (Z). 8T Series over ssemblies designed for use with 8ST and 8STP Poke-Thru Stem ssemblies. Includes one (1) 8TS Tile Shim. * dd suffix TR to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. 11

DTOM ONNETIVITY OPTIONS Now you have a wide range of options for providing datacom connectivity into Wiremold/Legrand Pathways.

Front-loading, snap-in design supports future moves adds and changes Inserts for voice, data, audio, and video vailable ategory 3, 5e, 6, USO 6-position, and other media Flat or angled 45 exit

Linear 110 punch down format for easy termination Inserts for voice, data, audio, and video vailable ategory 3, 5e, 6, USO 6-position, and other media vailable in flat or angled 45 exit

Pass & Seymour Legrand Network Wiring ctivate Series Front-Loading Inserts Modular inserts for voice, data, audio and video applications Front-load, snap-in design olor and texture matched to

12 DTOM ONNETIVITY OPTIONS Now you have a wide range of options for providing datacom connectivity into Wiremold/Legrand Pathways. They are: Ortronics TracJack and Series II Modular onnectivity Solutions Pass & Seymour ctivate Modular Inserts Open System ommunication Modules Ortronics onnectivity TracJack Individual Jack System Front-loading, snap-in design supports future moves adds and changes Inserts for voice, data, audio, and video vailable ategory 3, 5e, 6, USO 6-position, and other media Flat or angled 45 exit configurations hoice of 13 colors and color matched to Wiremold Systems Universal T568/ wiring format Series II Front-Loading, Module System Module design features easy snap-in front-loading design Linear 110 punch down format for easy termination Inserts for voice, data, audio, and video vailable ategory 3, 5e, 6, USO 6-position, and other media vailable in flat or angled 45 exit configurations olor matched to Wiremold Systems For detailed product selection refer to the Ortronics atalog or visit Pass & Seymour Legrand Network Wiring ctivate Series Front-Loading Inserts Modular inserts for voice, data, audio and video applications Front-load, snap-in design olor and texture matched to Wiremold Systems vailable ategory 3, 5e, 6, as well as 6-position USO Universal T568/ wiring format For detailed product selection refer to the Pass & Seymour Network Wiring atalog or visit Open onnectivity Solutions Wiremold Open System ommunications Modules ccommodate a wide range of manufacturers communications outlets including keystone jacks, as well as proprietary solutions from vaya (Systimax) and NORDX Modules insert into a wide range of Wiremold Systems Pre-punched faceplates accept common communication devices NOTE: For more information on integrating connectivity into Wiremold able Management Systems contact the Wiremold pplications Engineering Team or your local Wiremold Sales Representative. WIREMOLD U.S. and International: 60 Woodlawn Street West Hartford, T FX Outside U.S anada: 570 pplewood rescent Vaughan, Ontario L4K FX Sold by: Toll Free: (877) opyright 2009 Legrand/Wiremold ll Rights Reserved ED771R16 Updated November 2009 For latest specs visit

Resource RFB Series Floor Boxes

Resource RFB Series Floor Boxes Resource RF Series Floor oxes Recessed Floor oxes for oncrete & Wood Floors Wiremold Resource RF Series of Floor oxes are versatile recessed activation solutions that provide power, communication and/or