Recessed Floor Boxes for Concrete & Wood Floors

Transcription

1 Resource RF Series Floor oxes with Rectangular ctivations Recessed Floor oxes for oncrete & Wood Floors Resource RF Series of Floor oxes are versatile recessed activation solutions that provide power, communication and/or audio/ video services to open space areas, or directly to workstations. Resource RF Series Floor oxes are available in two- to six-gang models with a variety of aesthetic cover options including colors and profiles available. Resource RF Series Floor oxes have many applications, including schools, financial institutions, commercial office buildings, hospitality and residences. RF2-OG Floor ox with FloorPort over PRODUTS: RF2, RF2-SS, RF2-OG, RF4, RF4-SS, RF4-4D, RF4-I-1, RF4-I-N, RF6, RF6-OG Features & enefits RF6 has independent wiring compartments that allow capacity for up to six duplex receptacles and/or communication services. Reduces overall cost by providing for most cabling requirements. The RF4 has three versions for various applications. cast iron version to meet on grade requirements, a steel version to reduce installation cost on above grade floors, and a shallow steel version that provides flexibility with varying concrete depths. Fully adjustable before and after the concrete pour. Labor savings by adapting to various pour depths and conditions. Range of conduit sizes. llows for most conduit schemes, even feed through capability, which saves time and money during installation. KOs range from 1/2" to 2" trade size. Triple service boxes. ccommodate power, communication and/or audio/video devices which reduces the need for multiple boxes. Installs in both concrete and wood floors. Provides the first recessed wood floor box for both commercial and residential applications. RF2-SS & RF4-SS design allows for pass-around tunneling. Flexible design of shallow floor boxes allows adjacent compartments to be wired together. FloorPort ctivation overs. Provides TopGuard protection from water, dirt and debris plus added strength and durability. vailable in brushed aluminum and five decorative powder coat finishes: lack, rass, Nickel, Gray and ronze. Wide variety of mounting brackets. an adapt to most power and communication needs. Reduces overall life cycle cost. 2" onduit Hub. y using 2HU with the RF6 Series Floor ox (sold separately) a greater capacity of pre-terminated cables can be brought in the a shallower box. Increasing the functionality and reducing concrete pours. Lightweight slab-on-grade version. Special fusionbonded epoxy corrosion resistant paint finish allows for slab-on-grade use without the weight of cast iron material. Datacom connectivity options. ccepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, and /V applications at the point-of-use. wide selection of data and adapter options are available for use with Ortronics TracJack and Series II devices. uy merica ct/nft versions. FloorPort Service Fittings are available in versions that meet the uy merica ct/nft requirements. Vertical Markets ommercial Education Entertainment Healthcare Retail Download this product s PEP ecopasport environmental product declaration at This declaration conforms with ISO and and is in alignment with EN ompliance culus Listed Metallic Outlet oxes for tile, terrazzo, carpet and wood floors. File E2961 Guide QIT Protection from water, dirt, and debris. ED771R26 Updated December 2018 For latest specs visit

2 Resource RF Series Floor oxes with Rectangular ctivations Resource RF Series Floor oxes with Rectangular ctivations Selection Guide ox Model RF2 Install Floor Type: oncrete Wood Yes Yes RF2-SS Yes Yes ox Type: bove Grade bove Grade ox apacity: Depth ehind Plates: /V Trade Size ompatibility onduit Feed: 2 Gangs 3" [76mm] 1/2" 2 Gangs 3" [76mm] 1/2" RF2-OG Yes Yes On-Grade 2 Gangs 3" [76mm] 1/2" RF4 RF4-4D RF4-SS RF4-I-1 RF4-I-N RF6 RF6-OG over Style FloorPort FloorPort FloorPort ountry of Origin Mexico Mexico Mexico djustability bove Yes No Grade 4 Gangs 2" [51mm] Legrand 1/2" FloorPort Mexico VIP, ltinex bove Yes No Grade 4 Gangs 2" [51mm] Intera, 1/2" FloorPort Mexico Extron P, Fully bove djustable Yes No Grade 4 Gangs 2" [51mm] MP & 1/2" FloorPort Mexico Decorator, Ortronics Yes No On-Grade 4 Gangs 2" [51mm] Series II FloorPort hina Yes No On-Grade 4 Gangs 2" [51mm] FloorPort US Yes Yes bove Grade 6 Gangs Yes Yes On-Grade 6 Gangs 3 1/4" [83mm] 3 1/4" [83mm] 2" FloorPort Mexico 2" FloorPort Mexico NOTE: Pricing may vary depending on country of origin. onsult your local sales representative for more information. RF2 Series Floor oxes Ordering Information RF2-OG 6 1/2" [165mm] 13 1/8" [333mm] 3 7/16" [87mm] Two-ompartment ox For use On Grade. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate (RF22). Other device plates sold separately. NOTE: RF2-OG for on-grade applications is painted with a fusion-bonded epoxy designed for use on metal reinforcement bar and related accessories before encapsulating in concrete. RF2 3 7/16" [87mm] Two-ompartment ox For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate (RF22). Other device plates sold separately. 6 1/2" [165mm] 13 1/8" [333mm] RF2-SS 9/16" [14mm] 2 5/8" [67mm] Two-ompartment Shallow Stamped Steel Floor ox For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate (RF22). Other device plates sold separately. 6 1/2" [165mm] 13 1/8" [333mm] ED771R26 Updated December 2018 For latest specs visit 2

3 Resource RF Series Floor oxes with Rectangular ctivations RF2 Series Floor oxes ompartment apacities/knockout Locations & Sizes RF2 & RF2-OG RF2-SS 50.2 cu. in. [822.6 ml] Each Side 38.0 cu. in. [622.7 ml] Each Side Top View Top View ottom KO 1/2" [12.7mm] ottom KO ottom KO 1/2" [12.7mm] ottom KO ottom KO ottom KO 1/2" [12.7mm] ottom KO ottom KO 1/2" [12.7mm] RF2 Series Floor ox ccessories Ordering Information RF2DP Internal Duplex Receptacle racket ccepts standard 15 mp & 20 mp Duplex Receptacles. RF2RT Internal ommunication racket Includes Two (2) adapters to accept Ortronics TracJack devices, and Two (2) adapters to accept Ortronics Series II devices. (sold separately) RF2 RF2GFI RF22 Internal lank racket Plate used to close off unused gangs. Internal GFI or Decorator Style Receptacle racket ccepts standard GFI or Decorator Style Receptacles, ommunication or /V Devices. Internal ommunication racket Includes two (2) adapters to accept Wiremold M2 Series Open System communication inserts. (sold separately) RF2EXT Internal udio/video racket ccepts two (2) Legrand VIP or Extron Electronics MP Series devices. (sold separately) RF2-P Internal udio/video racket ccepts Two (2) Extron Electronics P Series devices. (sold separately) ED771R26 Updated December 2018 For latest specs visit 3

4 Resource RF Series Floor oxes with Rectangular ctivations RF2 Series Floor ox ccessories Ordering Information RFKIT arrier Kit arrier kit used to separate power and communication wires in partition feed covers. Supplied with base and three extensions to adjust to cover height. Kit should be used on RF2, RF2-OG, RF2-SS, RF4 and RF4-SS Floor oxes. Kits are sold separately. S3XP lanking Plate luminum top plate with steel support plate and four (4) adjusting screws. FP-TR are oncrete & Terrazzo Ring Nonmetallic ring for use on bare polished concrete and terrazzo floor applications. 2HU 2" onduit Transition Fitting Trade size 2" die cast zinc conduit fitting allows for 2" conduit to transition into a shallow box design. Includes: die cast fitting gasket. ccepts standard 2" threaded conduit or trade size EMT and PV conduit fittings. PKER Mudcap Extensions ttaches to preset to add height to preset. an be field installed. Extension Ring PK Preset Extension Height bove Preset PKER-10 PKER /2" [38mm] PKER-20 2" [51mm] PKER /2" [64mm] PKER-30 3" [76mm] ED771R26 Updated December 2018 For latest specs visit 4

5 Resource RF Series Floor oxes with Rectangular ctivations RF4 & RF4-4D Floor ox Ordering Information RF4 10" [254mm] 5 7/8" [149mm] Four-ompartment ombination ox 12 L x 10" W x 3 7/16" D [324mm x 254mm x 87mm]. Fully adjustable with tunnel compartment and two receptacle brackets. Tunneling from end power compartment to end power compartment only. ommunication brackets not included. See ccessories. NOTE: Only for use in concrete floors. ountry of Origin: ssembled in Mexico from components made in the US 4 [121mm] 12 [254mm] 3 7/16" [87mm] RF4-4D 10" [254mm] Four-ompartment ox Includes four duplex receptacle brackets. 12 L x 10" W x 3 7/16" D [324mm x 254mm x 87mm]. Fully adjustable. Tunneling from adjacent or opposite compartments only, (not cross compartments). Tunneling can be set to feed all four compartments from one conduit in a single-service application. NOTE: Only for use in concrete floors. 12 [324mm] 3 7/16" [87mm] ountry of Origin: ssembled in Mexico from components made in the US RF4 & RF4-4D Floor ox ompartment apacities and Knockout Locations and Sizes 32.3 cu in. [529 ml] (RF4* Data Only) 16.4 cu in. [269 ml] Feed Through Direction 50.0 cu in. [820 ml] 1/2" [12.7mm] Feed Through Direction (RF4* Data Only) 16.4 cu in. [269 ml] FOR RF4 *No feed through to opposite data compartment on RF4. Indicates ottom KO. ED771R26 Updated December 2018 For latest specs visit 5

6 Resource RF Series Floor oxes with Rectangular ctivations RF4 & RF4-4D Floor ox ccessories Ordering Information RF- Internal lank racket Power compartments only. Used to close off unused gangs. DT-2-DEOR ommunication racket Decorator style opening for decorator style 106 dapter. RF-DR Internal Duplex racket ccepts standard 15 mp & 20 mp Duplex Receptacles. DT-2-P Internal udio/video racket ccepts two (2) Extron Electronics P devices (sold separately) RF-GFI Internal GFI racket ccepts standard GFI or Decorator Style Receptacles, ommunication or udio/video Devices. DT-2-4TKO ommunication racket Four (4) RJ keystone opening knockouts. Use as blank plate or for up to four (4) RJ openings. NOTE: Opening dimension is 9/16" x (14.3mm x 19.1mm). RF4-LP ommunication racket ctivate low profile adapter included. Wiremold M Series Open System inserts sold separately. RF4-LPS2 ommunication racket Ortronics Series II Low profile adapter included. DT-2-2 ommunication racket Two (2) 2 size adapters included. Wiremold M2 Series Open System inserts, sold separately. DT-2-DT ommunication racket With one IM Type II opening and one keystone opening (devices not included). NOTE: For RF4 only. DT-2-SD ommunication racket With duplex opening for use with 106 dapter (sold separately) (devices not included). NOTE: For RF4 only. DT-EXT Internal udio/video racket ccepts two (2) Legrand VIP or Extron Electronics MP devices (sold separately). NOTE: For RF4 only. DT-2-RT ommunication racket Ortronics 2TJ TracJack and S2 Series II adapters included. RF-GFI-4D Internal GFI racket ccepts standard GFI or Decorator style receptacles, communications or /V devices. NOTE: For RF4-4D only. ED771R26 Updated December 2018 For latest specs visit 6

7 Resource RF Series Floor oxes with Rectangular ctivations RF4 & RF4-4D Floor ox ccessories Ordering Information RF-WT Ionversion Kit To convert the RF4 ox to a RF4-4D ox. NOTE: For RF4 & RF4-4D. WT-P Internal udio/video racket ccepts two (2) Extron Electronics P Series Devices (sold separately). NOTE: For RF4-4D only. WT-2- ommunication racket One 2 adapter included. Wiremold M2 Series Open System inserts sold separately. NOTE: For RF4-4D only. WT-MP Internal udio/video racket ccepts two (2) Legrand VIP or Extron Electronics MP Series Devices (sold separately). NOTE: For RF4-4D only. WT-2-RT ommunication racket Ortronics 2TJ TracJack and S2 Series II adapters included. NOTE: For RF4-4D only. RFKIT arrier Kit arrier kit used to separate power and communication wires in partition feed covers. Supplied with base and three extensions to adjust to cover height. Kit should be used on RF2, RF2-OG, RF2-SS, RF4 and RF4-SS Floor oxes. Kits are sold separately. FP-TR are oncrete & Terrazzo Ring Nonmetallic ring for use on bare polished concrete and terrazzo floor applications. ED771R26 Updated December 2018 For latest specs visit 7

8 Resource RF Series Floor oxes with Rectangular ctivations RF4-I-1 & RF4-I-N Floor ox Ordering Information RF4-I /8" [302mm] 5 1/8" [130mm] 5/8" [17mm] Four-ompartment ast Iron ox 14 1/2" L x 11 7/8" W x 3 7/16" D [368mm x 302mm x 87mm]. Fully adjustable with tunnel compartment and two receptacle brackets. Feed through from adjacent or opposite compartments only, (not cross compartments). ommunication brackets not included. See ccessories. NOTE: Only for use in concrete floors. ll boxes and activations are sold separately. 5 1/8" [130mm] 3 7/16" 14 1/2" [87mm] [368mm] ountry of Origin: hina RF4-I-N 11 7/8" [302mm] 5 1/8" [130mm] Four-ompartment ast Iron ox 14 1/2" L x 11 7/8" W x 3 7/16" D [368mm x 302mm x 87mm]. Fully adjustable with tunnel compartment and two receptacle brackets. Feed through from adjacent or opposite compartments only, (not cross compartments). ommunication brackets not included. See ccessories. 5/8" [17mm] NOTE: Only for use in concrete floors. ll boxes and activations are sold separately. 5 1/8" [130mm] 3 7/16" 14 1/2" [87mm] [368mm] RF4-I-1 & RF4-I-N Floor ox ompartment apacities and Knockout Locations and Sizes 27.0 cu in. [443 ml] 36.0 cu in. [590 ml] 36.0 cu in. [590 ml] 27.0 cu in. [443 ml] For RF4-I-1 & RF4-I-N NOTE: Pricing varies depending on country of origin. onsult your local sales representative for more information. ED771R26 Updated December 2018 For latest specs visit 8

9 Resource RF Series Floor oxes with Rectangular ctivations RF4-I-1 & RF4-I-N Floor ox ccessories Ordering Information IHT-D Internal Duplex Receptacle racket ccepts standard 15 mp & 20 mp Duplex Receptacles. RFIKIT arrier Kit arrier kit used with RF4-I Floor oxes. Kits are sold separately. IH/LT- Internal lank racket Used to close off unused gangs. FP-TR are oncrete & Terrazzo Ring Nonmetallic ring for use on bare polished concrete and terrazzo floor applications. IHT-GFI Internal GFI Device racket ccepts standard GFI or Decorator Style Receptacles, ommunication or udio/video Devices. PKER Mudcap Extensions ttaches to preset to add height to preset. an be field installed. ILT-2 ommunication racket ommunication bracket with two 2 size ctivate adapters included. ccepts Wiremold M2 Series Open System communication modules (sold separately). Extension Ring PK Preset Extension Height bove Preset PKER-10 PKER /2" [38mm] PKER-20 2" [51mm] PKER /2" [64mm] PKER-30 3" [76mm] ILT-2-RT ommunication racket ommunication bracket with Ortronics 2TJ TracJack and S2 Series II adapters included. ccepts Ortronics workstation connectivity outlets and modular inserts. S3XP lanking Plate luminum top plate with steel support plate and four (4) adjusting screws. ILT-4TKO ommunication racket ommunication bracket with four (4) RJ opening knockouts. Use as blank plate or for up to four RJ openings. NOTE: Opening dimension is 9/16" x [14.3mm x 19.1mm]. ED771R26 Updated December 2018 For latest specs visit 9

10 Resource RF Series Floor oxes with Rectangular ctivations RF4-SS Floor ox Ordering Information RF4-SS 10" [254mm] 5 7/8" [149mm] Four-ompartment Shallow Stamped Steel ox 13 5/8" L x 10" W x 2 7/16" D [346mm x 254mm x 62mm]. Fully adjustable with tunnel compartment and two receptacle brackets. Feed through tunneling to adjacent compartments only. Tunneling can be set to feed all four compartments from one conduit in a single-service application. ommunication brackets not included. See ccessories. NOTE: Only for use in concrete floors. ll boxes and activations are sold separately. 13 5/8" [346mm] 4 [121mm] 2 7/16" [62mm] ountry of Origin: ssembled in Mexico from components made in the US RF4-SS Floor ox ompartment apacities and Knockout Locations and Sizes 31.2 cu in. [511 ml] 15.7 cu. in. [257 ml] 15.7 cu in. [257 ml] 31.2 cu in. [511 ml] FOR RF4-SS 1/2" [12.7mm] 1/2" [12.7mm] Indicates ottom KO ED771R26 Updated December 2018 For latest specs visit 10

11 Resource RF Series Floor oxes with Rectangular ctivations RF4-SS Floor ox ccessories Ordering Information RF--SS Internal lank racket Used to close off unused gangs. RF4-SS-MP Internal udio/video racket ccepts two Extron Electronics MP Series Devices. (Sold separately) RF-R-SS Internal Duplex Receptacle racket ccepts standard 15 mp & 20 mp Duplex Receptacles. RF-GFI-SS Internal GFI Receptacle racket ccepts standard GFI & Decorator style Receptacles ommunication or udio/video Devices. RFKIT arrier Kit arrier kit used to separate power and communication wires in partition feed covers. Supplied with base and three extensions to adjust to cover height. Kit should be used on RF2, RF2-OG, RF2-SS, RF4 and RF4-SS Floor oxes. Kits are sold separately. RF-2-SSInternal racket Two Pass & Seymour ctivate adapters included. Wiremold M Series Open System inserts sold separately. FP-TR are oncrete & Terrazzo Ring Nonmetallic ring for use on bare polished concrete and terrazzo floor applications. RF-2-SSRT ommunication racket Ortronics 2TJ TracJack and S2 Series II adapters included. RF-4TKO-SS Internal racket Four RJ Keystone opening knockouts. Use as blank plate or for up to four RJ openings. PKER Mudcap Extension Ring PK Preset Extensions ttaches to preset to add height to preset. an be field installed. Extension Height bove Preset PKER-10 PKER /2" [38mm] PKER-20 2" [51mm] PKER /2" [64mm] PKER-30 3" [76mm] NOTE: Opening dimension is 9/16" x [14.3mm x 19.1mm]. RF4-SS-P Internal udio/video racket ccepts two (2) Extron Electronics P Series Devices. (Sold separately) S3XP lanking Plate luminum top plate with steel support plate and four (4) adjusting screws. ED771R26 Updated December 2018 For latest specs visit 11

12 Resource RF Series Floor oxes with Rectangular ctivations RF6 Series Floor ox Ordering Information RF6 3 1/4" [82.55mm] Six-ompartment ox For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with two (2) duplex mounting plates, two (2) communication mounting plates (RF62), and (2) blank mounting plates. Other plates sold separately. 14" [355mm] 14 5/8" [371mm] RF6-OG 9/16" [14mm] 3 1/4" [82.55mm] Six-ompartment On-Grade ox For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with two (2) duplex mounting plates, two (2) communication mounting plates (RF62), and (2) blank mounting plates. Other plates sold separately. 14" [355mm] 14 5/8" [371mm] RF6 Series Floor ox ompartment apacities and Knockout Locations and Sizes Side Knockout Locations ottom Knockout Locations ompartment Wire and ommunication ompacities ompartment ompartment ompartment D ompartment D ompartment ompartment KNOKOUTS = Side KO = Side KO = Side KO Feed through is accomplished through removable plugs. = ottom KO = ottom KO KNOKOUTS OMPRTMENT PITIES = 52 in 3 [852ml] D = 23 in 3 [376ml] ED771R26 Updated December 2018 For latest specs visit 12

13 Resource RF Series Floor oxes with Rectangular ctivations RF6 Series Floor ox ccessories Ordering Information RF6DP Internal Duplex Receptacle racket ccepts standard 15 & 20 mp Duplex Receptacles. RF62 Internal ommunication racket Includes two (2) adapters to accept Wiremold M2 Series Open System communication inserts (sold separately). RF6 RF6-GFI Internal lank racket loses off unused gangs. Internal GFI or Decorator Style Receptacle racket ccepts standard GFI & Decorator Style Receptacles, ommunication or /V Devices. RF6-P Internal /V racket ccepts two (2) Extron Electronics P Series Devices (sold separately). FP-TR are oncrete & Terrazzo Ring Nonmetallic ring for use on bare polished concrete and terrazzo floor applications. RF6S1 Internal Single Receptacle racket Receptacle opening 1 3/8" (35mm). PKER Mudcap Extensions ttaches to preset to add height to preset. an be field installed. Extension Height bove Preset RF6S2 Internal Single Receptacle racket Receptacle opening 1 9/16" (40mm). Extension Ring PKER-10 PKER /2" [38mm] PKER-20 2" [51mm] PKER /2" [64mm] PK Preset PKER-30 3" [76mm] RF6RTInternal ommunication racket Includes one (1) adapter to accept Ortronics TracJack devices, and one (1) adapter to accept Ortronics Series II devices (sold separately). S3XP lanking Plate luminum top plate with steel support plate and four (4) adjusting screws. RF6EXTInternal udio/video racket ccepts three (3) Legrand VIP or Extron Electronics MP Series devices (sold separately). RF6KIT arrier Kit Used to separate power and communication services. Used in combination with FloorPort Furniture Feed overs (FPFFT Series). overs sold separately. ED771R26 Updated December 2018 For latest specs visit 13

14 Resource RF Series Floor oxes with Rectangular ctivations FloorPort Series over ssemblies for Resouce RF Series Floor oxes FLOORPORT PRT NUMER ONFIGURTOR FP T NK FloorPort over lank Top utout Top Furniture Feed FF Tile (Flangeless) Tile/arpet (Flanged) T T Nickel rass lack NK S K ronze Gray rushed luminum Z GY L FloorPort Series Flanged over ssemblies Ordering Information FPTK FPTZ FPTS FPTNK FPTL FPTGY FPTK FPTZ FPTS FPTNK FPTL FPTGY utout over ssembly Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly available in black (K), bronze (Z), brass (S), nickel (NK), gray (GY), or brushed aluminum (L). Insert in lid allows for carpet or tile cutouts to match finished floor. ountry of Origin: India lank over ssembly Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly available in black (K), bronze (Z), brass (S), nickel (NK), gray (GY), or brushed aluminum (L). Lid area is flush with the finished floor, no cutouts provided. FPFFTK FPFFTZ FPFFTS FPFFTNK FPFFTL FPFFTGY Furniture Feed over ssembly Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly available in black (K), bronze (Z), brass (S), nickel (NK), gray (GY), or brushed aluminum (L). Provided with one trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. llows for feeding both power and communication cabling. ountry of Origin: India FloorPort Series Flangeless over ssemblies Ordering Informatio FPTK FPTZ FPTS FPTNK FPTL FPTGY FPTK FPTZ FPTS FPTNK FPTL FPTGY utout over ssembly Flangeless cover for use in tile installations. Die-cast aluminum assembly available in black (K), bronze (Z), brass (S), nickel (NK), gray (GY), or brushed aluminum (L). Insert in lid allows for tile cutouts to match finished floor. ountry of Origin: India lank over ssembly Flangeless cover for use in tile installations. Die-cast aluminum assembly available in black (K), bronze (Z), brass (S), nickel (NK), gray (GY), or brushed aluminum (L). Lid area is flush with the finished floor, no cutouts provided. FPFFTK FPFFTZ FPFFTS FPFFTNK FPFFTL FPFFTGY Furniture Feed over ssembly Flangeless cover for use in tile installations. Die-cast aluminum assembly available in black (K), bronze (Z), brass (S), nickel (NK), gray (GY), or brushed aluminum (L). Provided with one trade size screw plug for power or communication type cabling and one combination and 2" trade size screw plug for communication type cabling. llows for feeding both power and communication cabling. ountry of Origin: India NOTE: Pricing varies depending on country of origin. onsult your local sales representative for more information. ED771R26 Updated December 2018 For latest specs visit 14

15 Resource RF Series Floor oxes with Rectangular ctivations North merica Made FloorPort Series over ssemblies for Resouce RF Series Floor oxes FLOORPORT PRT NUMER ONFIGURTOR FP T NK FloorPort over lank Top utout Top Furniture Feed FF Tile (Flangeless) Tile/arpet (Flanged) T T Nickel rass lack NK S K ronze Gray rushed luminum Z GY L N North merica Made N North merica Made FloorPort Series Flanged over ssemblies Ordering Information FPTK-N FPTZ-N FPTS-N FPTNK-N FPTL-N FPTGY-N FPTK-N FPTZ-N FPTS-N FPTNK-N FPTL-N FPTGY-N utout over ssembly Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly available in black (K), bronze (Z), brass (S), nickel (NK), or gray (GY). Insert in lid allows for carpet or tile cutouts to match finished floor. lank over ssembly Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly available in black (K), bronze (Z), brass (S), nickel (NK), gray (GY), or brushed aluminum (L). Lid area is flush with the finished floor, no cutouts provided. FPFFTK-N FPFFTZ-N FPFFTS-N FPFFTNK-N FPFFTL-N FPFFTGY-N FPFFTK-N FPFFTZ-N FPFFTS-N FPFFTNK-N FPFFTL-N FPFFTGY-N Furniture Feed over ssembly Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly available in black (K), bronze (Z), brass (S), nickel (NK), gray (GY), or brushed aluminum (L). Provided with one trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. llows for feeding both power and communication cabling. Furniture Feed over ssembly Flangeless cover for use in tile installations. Die-cast aluminum assembly available in black (K), bronze (Z), brass (S), nickel (NK), gray (GY), or brushed aluminum (L). Provided with one trade size screw plug for power or communication type cabling and one combination and 2" trade size screw plug for communication type cabling. llows for feeding both power and communication cabling. NOTE: Pricing varies depending on country of origin. onsult your local sales representative for more information. LOD PITIES FOR FLOORPORT OVER SSEMLIES TLOG NUMERS MXIMUM LOD IN POUNDS FPT 1000 FPT 750 FPFFT 1000 FPT 1000 FPT 750 FPFFT 1000 NOTE: Load applied through a 2" [51mm] mandrel in center of service fitting. Load s above are static loads only and do not pertain to rolling loads. ED771R26 Updated December 2018 For latest specs visit 15

16 Resource RF Series Floor oxes with Rectangular ctivations NOTE: ll brand and product names referenced in this document are registered trademarks or trademarks of their respective holders. NOTE: The paper used to print this document is an environmentally responsible paper with 10% post consumer waste, with FS and SFI hain of ustody certifications, Lacey ct complaint. 100% of the electricity used to manufacture Flo sheets is generated with Green-e certified renewable energy. Legrand, North merica 60 Woodlawn Street West Hartford, T Y.LEGRND ( ) anada FOLLOW US ED771R26 Updated December 2018 For latest specs visit