Resource RFB Series Floor Boxes

Size: px

Start display at page:

Download "Resource RFB Series Floor Boxes"

Martha Lyons
5 years ago
Views:

Resource RF Series Floor oxes Recessed Floor oxes for oncrete & Wood Floors Wiremold Resource RF Series of Floor oxes are versatile recessed activation solutions that provide power, communication

1 Resource RF Series Floor oxes Recessed Floor oxes for oncrete & Wood Floors Wiremold Resource RF Series of Floor oxes are versatile recessed activation solutions that provide power, communication and/or audio/video services to open space areas, or directly to workstations. RF Series Floor oxes are available in two (2) to six (6) gang options with a variety of aesthetic cover options (colors and shapes) to choose from. RF Series Floor oxes have many applications, some of which include schools, financial institutions, commercial office buildings, and residences. /V INTEGRTION Protection from water, dirt, and debris. RF4 Series Floor ox with the new FloorPort ctivation over. n RF6 & RF6E have independent wiring compartments that allow capacity for up to six duplex receptacles and/or communication services. Reduces overall cost by providing for most cabling requirements. n The RF4 has three versions for various applications. cast iron version to meet on grade requirements, a steel version to reduce installation cost on above grade floors, and a shallow steel version that provides flexibility with varying concrete depths. n Fully adjustable before and after the concrete pour. Labor savings by adapting to various pour depths and conditions. n Range of conduit sizes. llows for most conduit schemes, even feed through capability, which saves time and money during installation. KOs range from 1/2" to 2" trade size. n Triple service boxes. ccommodate power, communication and/or audio/video devices which reduces the need for multiple boxes. n ccepts round Evolution Series overs. RF4E Series Floor ox accept the round 6" Evolution Series overs while RF6E Series Floor ox accepts the round 8" Evolution Series overs increasing the ability to match aesthetics throughout the building. F E T U R E S & E N E F I T S n RF2 & RF4 shallow versions allow pass-around tunneling. Flexibility in design to have adjacent compartments wired together. n Redesigned FloorPort ctivation overs. Provides TopGuard protection from water, dirt and debris plus added strength and durability. Now available in brushed aluminum and five decorative powder coat finishes: lack, rass, Nickel, Gray and ronze. n Wide variety of mounting brackets. an adapt to most power and communication needs. Reduces overall life cycle cost. n RF4E and RF6E Series Floor oxes available for bare concrete and terrazzo floors. y using RF4E-TR or RF6E-TR Rings (sold separately) these boxes can be installed into bare concrete or terrazzo floors with a clean, aesthetic finish. n Datacom connectivity options. ccepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point-of-use. wide selection of data and adapter options are available for use with Ortronics TracJack and Series II devices. n 2" onduit Hub. y using 2HU with the RF4E Series Floor ox (sold separately) a greater capacity of preterminated cables can be brought in the a shallower box. Increasing the functionality and reducing concrete pours. n Installs in both concrete and wood floors. Provides the first recessed wood floor box for both commercial and residential applications. vailable for RF2, RF6 and RF6E Series Floor oxes. n Lightweight slab-on-grade version. Special fusion-bonded epoxy corrosion resistant paint finish allows for slab-ongrade use without the weight of cast iron material. vailable in RF2, RF4E, RF6 and n ccepts Floorport ctivation overs. llows a consistent aesthetic finish for the RF2, RF4 & RF6 Series Recessed Floor oxes. n UL Listed to U.S. and anadian safety standards for tile, terrazzo, carpet and wood floors. ED771R18 Updated January 2012 For latest specs visit

2 ox Model RF2 Install Floor Type: oncrete Wood Yes Yes RF2-SS Yes Yes Resource RF Series Floor ox Selection Guide ox Type: bove Grade bove Grade ox apacity: Depth ehind Plates: /V Trade Size ompatibility onduit Feed: over Style 2 Gangs 3" [76mm] FloorPort 2 Gangs 3" [76mm] FloorPort RF2-OG Yes Yes On-Grade 2 Gangs 3" [76mm] FloorPort RF4 Yes No bove Grade 4 Gangs 2" [51mm] FloorPort bove RF4-4D Yes No Grade 4 Gangs 2" [51mm] 1/2" FloorPort Legrand bove RF4-SS Yes No Grade 4 Gangs 2" [51mm] VIP, ltinex FloorPort Intera, RF4-I-1 Yes No On-Grade 4 Gangs 2" [51mm] Extron P, MP & FloorPort RF4E Yes No bove Decorator, Grade 4 Gangs Ortronics Series II RF4E-OG Yes No On-Grade 4 Gangs RF6 Yes Yes bove Grade 6 Gangs RF6-OG Yes Yes On-Grade 6 Gangs RF6E Yes Yes bove Grade 6 Gangs RF6E-OG Yes Yes On-Grade 6 Gangs 3 1/2" [89mm] 3 1/2" [89mm] 3 1/4" [83mm] 3 1/4" [83mm] 3 1/4" [83mm] 3 1/4" [83mm] 2" Evolution 6T, 6T & 2" 6FFT Series FloorPort FloorPort Evolution 8T & 8T Series over olors rushed luminum, lack, Nickel, rass, Gray, ronze lack, Nickel, rass, Gray, ronze rushed luminum, lack, Nickel, rass, Gray, ronze lack, Nickel, rass, Gray, ronze djustability Fully djustable RF2 RF2 Series Multiservice Steel Recessed Floor ox Ordering Information 3 7/16" [87mm] Two-ompartment ox For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate (RF22). Other device plates sold separately. 6 1/2" [165mm] 13 1/8" [333mm] RF2-SS Two-ompartment Shallow Stamped Steel Floor ox 9/16" 2 5/8" For use in either concrete or wood floors. Fully [14mm] [67mm] adjustable with tunnel compartment. Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate (RF22). Other device plates sold separately. 6 1/2" [165mm] 13 1/8" [333mm] RF2-OG 6 1/2" [165mm] 13 1/8" [333mm] 3 7/16" [87mm] Two-ompartment ox For use On Grade. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate (RF22). Other device plates sold separately. NOTE: RF2-OG for on-grade applications is painted with a fusion-bonded epoxy designed for use on metal reinforcement bar and related accessories before encapsulating in concrete. 2

RF2 Series Floor oxes ompartment apacities/ Knockout Locations & Sizes RF2 & RF2-OG 50.2 cu. in. [822.6 ml] Each Side Top View RF2-SS 38.0 cu. in. [622.7 ml] Each Side Top View ottom KO 1/2" [12.

3 RF2 Series Floor oxes ompartment apacities/ Knockout Locations & Sizes RF2 & RF2-OG 50.2 cu. in. [822.6 ml] Each Side Top View RF2-SS 38.0 cu. in. [622.7 ml] Each Side Top View ottom KO 1/2" [12.7mm] ottom KO ottom KO 1/2" [12.7mm] ottom KO ottom KO ottom KO 1/2" [12.7mm] ottom KO ottom KO 1/2" [12.7mm] RF2DP RF2 RF2GFI RF22 RF2 Series Multiservice Steel Recessed Floor ox ccessories Internal Duplex Receptacle racket ccepts standard 15 mp & 20 mp Duplex Receptacles. NOTE: For RF2 Series Internal lank racket Plate used to close off unused gangs. NOTE: For RF2 Series Internal GFI or Decorator Style Receptacle racket ccepts standard GFI or Decorator Style Receptacles, ommunication or udio/video Devices. NOTE: For RF2 Series Internal ommunication racket Includes two (2) adapters to accept Wiremold M2 Series Open System communication inserts NOTE: For RF2 Series RF2RT Internal ommunication racket Includes Two (2) adapters to accept Ortronics TracJack devices, and Two (2) adapters to accept Ortronics Series II devices NOTE: For RF2 Series RF2EXT Internal udio/video racket ccepts two (2) Legrand VIP or Extron Electronics MP Series devices NOTE: For RF2 Series RF2-P Internal udio/video racket ccepts Two (2) Extron Electronics P Series devices NOTE: For RF2 Series RF2 Series Floor ox with FloorPort ctivation over. 3

RF4 RF4 & RF4-4D Series Multiservice Steel Recessed Floor ox Ordering Information 10" [254mm] 5 7/8" [149mm] Four-ompartment ombination ox 12 L x 10" W x 3 7/16" D [324mm x 254mm x 87mm].

4 RF4 RF4 & RF4-4D Series Multiservice Steel Recessed Floor ox Ordering Information 10" [254mm] 5 7/8" [149mm] Four-ompartment ombination ox 12 L x 10" W x 3 7/16" D [324mm x 254mm x 87mm]. Fully adjustable with tunnel compartment and two receptacle brackets. Tunneling from end power compartment to end power compartment only. ommunication brackets not included. See ccessories. NOTE: Only for use in concrete floors. 4 [121mm] 12 [254mm] 3 7/16" [87mm] RF4-4D 10" [254mm] Four-ompartment ox Includes four duplex receptacle brackets. 12 L x 10" W x 3 7/16" D [324mm x 254mm x 87mm]. Fully adjustable. Tunneling from adjacent or opposite compartments only, (not cross compartments). Tunneling can be set to feed all four compartments from one conduit in a single-service application. NOTE: Only for use in concrete floors. 12 [324mm] 3 7/16" [87mm] NOTE: ll boxes and activations are sold separately. RF4 & RF4-4D Series ompartment apacities and Knockout Locations and Sizes 32.3 cu in. [529 ml] (RF4* Data Only) 16.4 cu in. [269 ml] Feed Through Direction 50.0 cu in. [820 ml] 1/2" [12.7mm] Feed Through Direction (RF4* Data Only) 16.4 cu in. [269 ml] FOR RF4 *No feed through to opposite data compartment on RF4. Indicates ottom KO. RF4 Series Floor ox with FloorPort ctivation over. 4

5 RF- Internal lank racket Power compartments only. Used to close off unused gangs. RF-DR Internal Duplex racket ccepts standard 15 mp & 20 mp Duplex Receptacles. RF-GFI RF4 & RF4-4D Series Multiservice Steel Recessed Floor ox ccessories Internal GFI racket ccepts standard GFI or Decorator Style Receptacles, ommunication or udio/video Devices. RF4-LP ommunication racket ctivate low profile adapter included. Wiremold M Series Open System inserts sold separately. RF4-LPS2 ommunication racket Ortronics Series II Low profile adapter included. DT-2-2 ommunication racket Two (2) 2 size adapters included. Wiremold M2 Series Open System inserts, sold separately. DT-2-2RT ommunication racket Ortronics 2TJ TracJack and S2 Series II adapters included. DT-2-DEOR ommunication racket Decorator style opening for decorator style 106 dapter. DT-2-4TKO ommunication racket Four (4) RJ keystone opening knockouts. Use as blank plate or for up to four (4) RJ openings. Opening dimension is 9/16" x [ 14.3mm x 19.1mm]. DT-2-DT ommunication racket With one IM Type II opening and one keystone opening (devices not included). DT-2-SD ommunication racket With duplex opening for use with 106 dapter (sold separately) (devices not included). DT-EXT Internal udio/video racket ccepts two (2) Legrand VIP or Extron Electronics MP devices RF-GFI-4D RF-WT Internal GFI racket ccepts standard GFI or Decorator style receptacles, communications or /V devices. NOTE: For RF4-4D only. onversion Kit To convert the RF4 ox to a RF4-4D ox. NOTE: For RF4 & RF4-4D. WT-2- ommunication racket One 2 adapter included. Wiremold M2 Series Open System inserts sold separately. NOTE: For RF4-4D Series WT-2-RT ommunication racket Ortronics 2TJ TracJack and S2 Series II adapters included. NOTE: For RF4-4D Series DT-2-P Internal udio/video racket ccepts two (2) Extron Electronics P devices dditional configurations available. Please consult your local Sales Representative for more information. WT-P Internal udio/video racket ccepts two (2) Extron Electronics P Series Devices (sold separately). NOTE: For RF4-4D Series WT-MP Internal udio/video racket ccepts two (2) Legrand VIP or Extron Electronics MP Series Devices NOTE: For RF4-4D Series 5

6 RF4-I-1 Series Multiservice ast Iron Recessed Floor ox Ordering Information RF4-I /8" Four-ompartment ast Iron ox [302mm] 5 1/8" [130mm] 5/8" [17mm] 5 1/8" [130mm] 3 7/16" 14 1/2" [87mm] [368mm] 14 1/2" L x 11 7/8" W x 3 7/16" D [368mm x 302mm x 87mm]. Fully adjustable with tunnel compartment and two receptacle brackets. Feed through from adjacent or opposite compartments only, (not cross compartments). ommunication brackets not included. See ccessories. NOTE: Only for use in concrete floors. ll boxes and activations are sold separately. RF4-I-1 Series ompartment apacities and Knockout Locations and Sizes 27.0 cu in. [443 ml] 36.0 cu in. [590 ml] 36.0 cu in. [590 ml] 27.0 cu in. [443 ml] For RF4-I-1 IHT-D IH/LT- RF4-I-1 Series Multiservice ast Iron Floor ox ccessories Internal Duplex Receptacle racket ccepts standard 15 mp & 20 mp Duplex Receptacles. Internal lank racket Used to close off unused gangs. ILT-2-RT ommunication racket ommunication bracket with Ortronics 2TJ TracJack and S2 Series II adapters included. ccepts Ortronics workstation connectivity outlets and modular inserts. IHT-GFI Internal GFI Device racket ccepts standard GFI or Decorator Style Receptacles, ommunication or udio/video Devices. ILT-2 ommunication racket ommunication bracket with two 2 size ctivate adapters included. ccepts Wiremold M2 Series Open System communication modules ILT-4TKO ommunication racket ommunication bracket with four (4) RJ opening knockouts. Use as blank plate or for up to four RJ openings. NOTE: Opening dimension is 9/16" x [14.3mm x 19.1mm]. dditional configurations available. Please consult your local Sales Representative for more information. 6

7 RF4-SS Series Multiservice Shallow Steel Recessed Floor ox Ordering Information RF4-SS Four-ompartment Shallow Stamped Steel ox 10" 13 5/8" L x 10" W x 2 7/16" D [346mm x 254mm x 62mm]. [254mm] 5 7/8" Fully adjustable with tunnel compartment and two [149mm] receptacle brackets. Feed through tunneling to adjacent compartments only. Tunneling can be set to feed all four compartments from one conduit in a single-service application. ommunication brackets not included. See ccessories. 4 [121mm] 13 5/8" [346mm] 2 7/16" [62mm] NOTE: Only for use in concrete floors. ll boxes and activations are sold separately cu in. [511 ml] RF4-SS Series ompartment apacities/ Knockout Locations & Sizes 15.7 cu. in. [257 ml] 15.7 cu in. [257 ml] 31.2 cu in. [511 ml] FOR RF4-SS 1/2" [12.7mm] 1/2" [12.7mm] Indicates ottom KO RF--SS RF4-SS Series Multiservice Shallow Steel Floor ox ccessories Internal lank racket Used to close off unused gangs. RF-2-SSRT ommunication racket Ortronics 2TJ TracJack and S2 Series II adapters included. RF-R-SS RF-GFI-SS Internal Duplex Receptacle racket ccepts standard 15 mp & 20 mp Duplex Receptacles. Internal GFI Receptacle racket ccepts standard GFI & Decorator style Receptacles ommunication or udio/video Devices. RF-2-SS Internal racket Two Pass & Seymour ctivate adapters included. Wiremold M Series Open System inserts sold separately. dditional configurations available. Please consult your local Sales Representative for more information. RF-4TKO-SS Internal racket Four RJ Keystone opening knockouts. Use as blank plate or for up to four RJ openings. NOTE: Opening dimension is 9/16" x [14.3mm x 19.1mm]. RF4-SS-P Internal udio/video racket ccepts two (2) Extron Electronics P Series Devices. (Sold separately) NOTE: For RF4-SS Series RF4-SS-MP Internal udio/video racket ccepts two Extron Electronics MP Series Devices. (Sold separately) NOTE: For RF4-SS Series 7

8 RF4E RF4E Series Multiservice Steel Recessed Floor ox Ordering Information 13 1/8" [334mm] 1 13/32" [36mm] Four-ompartment ox For use in concrete floors. For use with the round Evolution cover. Fully adjustable with tunnel compartments. Device Plates sold separately. 13 1/8" [334mm] 4 1/16" [103mm] RF4E-OG 13 1/8" [355mm] 1 13/32" [36mm] Four-ompartment On-Grade ox For use in concrete floors. For use with the round Evolution cover. Fully adjustable with tunnel compartments. Device Plates sold separately. 13 1/8" [334mm] 4 1/16" [103mm] RF4E Series ompartment Knockout Locations & Sizes Four ompartments Each ompartment apacity 75in 3 [1230ML] Trade Size Trade Size Trade Size Trade Size Trade Size 2" Trade Size Trade Size Trade Size Trade Size Trade Size Trade Size Trade Size Trade Size 3 1/2" [89mm] Depth behind Device Plates Removable Plate with trade Size KO Trade Size Trade Size 2" Trade Size Trade Size Removable Plate with trade Size KO Trade Size Trade Size Trade Size 8

RF4E, RF6 & RF6E Series Multiservice Steel Recessed Floor ox ccessories RF6DP Internal Duplex Receptacle racket ccepts standard 15 & 20 mp Duplex Receptacles.

9 RF4E, RF6 & RF6E Series Multiservice Steel Recessed Floor ox ccessories RF6DP Internal Duplex Receptacle racket ccepts standard 15 & 20 mp Duplex Receptacles. RF6RT Internal ommunication racket Includes one (1) adapter to accept Ortronics TracJack devices, and one (1) adapter to accept Ortronics Series II devices RF6 Internal lank racket loses off unused gangs. RF6EXT Internal udio/video racket ccepts three (3) Legrand VIP or Extron Electronics MP Series devices RF6GFI RF6S1 Internal GFI or Decorator Style Receptacle racket ccepts standard GFI & Decorator Style Receptacles, ommunication or udio/video Devices. Internal Single Receptacle racket Receptacle opening 1 3/8" [35mm]. RF62 Internal ommunication racket Includes two (2) adapters to accept Wiremold M2 Series Open System communication inserts RF6S2 Internal Single Receptacle racket Receptacle opening 1 9/16" [40mm]. RF6-P Internal udio/video racket ccepts two (2) Extron Electronics P Series Devices RF4E-TR are oncrete & Terrazzo Ring Nonmetallic ring for use with bare concrete and terrazzo floor applications. NOTE: Only for use on RF4E and RF4E-OG Floor oxes. NOTE: Designed to work with 6T Series overs only. RF4E Floor ox with Evolution Series over. 2HU 2" onduit Transition Hub Trade size 2" die cast zinc conduit fitting allows for 2" conduit to transition into a shallow box design. Includes: die cast fitting, gasket, and mounting screws. 9

10 RF6 RF6 & RF6E Series Multiservice Steel Recessed Floor ox Ordering Information 9/16" [14mm] 14" [355mm] 14 5/8" [371mm] 3 1/4" [82.55mm] Six-ompartment ox For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with two (2) duplex mounting plates, two (2) communication mounting plates (RF62), and (2) blank mounting plates. Other plates sold separately. RF6-OG 9/16" [14mm] 14" [355mm] 14 5/8" [371mm] 3 1/4" [82.55mm] Six-ompartment On-Grade ox For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with two (2) duplex mounting plates, two (2) communication mounting plates (RF62), and (2) blank mounting plates. Other plates sold separately. RF6E 14" [355mm] 1 1/8" [28mm] Six-ompartment ox For use in concrete floors. For use with the round Evolution cover. Fully adjustable with tunnel compartments. Supplied with two (2) duplex mounting plates. Other plates sold separately. 14 5/8" [371mm] 4" [102mm] RF6E-OG 14" [355mm] 14 5/8" [371mm] 1 1/8" [28mm] 4" [102mm] Six-ompartment On-Grade ox For use in concrete floors. For use with the round Evolution cover. Fully adjustable with tunnel compartments. Supplied with two (2) duplex mounting plates. Other plates sold separately. RF6 Series ompartment apacities/knockout Locations & Sizes Side Knockout Locations ottom Knockout Locations ompartment Wire and ommunication ompacities ompartment ompartment ompartment D ompartment D ompartment ompartment KNOKOUTS = Side KO = Side KO = Side KO Feed through is accomplished through removable plugs. = ottom KO = ottom KO KNOKOUTS OMPRTMENT PITIES = 52 in 3 [852ml] D = 23 in 3 [376ml] 10

RF6 & RF6E Series Multiservice Steel Recessed Floor ox ccessories RF6DP Internal Duplex Receptacle racket ccepts standard 15 & 20 mp Duplex Receptacles.

11 RF6 & RF6E Series Multiservice Steel Recessed Floor ox ccessories RF6DP Internal Duplex Receptacle racket ccepts standard 15 & 20 mp Duplex Receptacles. RF6RT Internal ommunication racket Includes one (1) adapter to accept Ortronics TracJack devices, and one (1) adapter to accept Ortronics Series II devices RF6 Internal lank racket loses off unused gangs. RF6EXT Internal udio/video racket ccepts three (3) Legrand VIP or Extron Electronics MP Series devices RF6GFI RF6S1 Internal GFI or Decorator Style Receptacle racket ccepts standard GFI & Decorator Style Receptacles, ommunication or udio/video Devices. Internal Single Receptacle racket Receptacle opening 1 3/8" [35mm]. RF62 Internal ommunication racket Includes two (2) adapters to accept Wiremold M2 Series Open System communication inserts RF6S2 Internal Single Receptacle racket Receptacle opening 1 9/16" [40mm]. RF6-P Internal udio/video racket ccepts two (2) Extron Electronics P Series Devices RF6E-TR are oncrete & Terrazzo Ring Nonmetallic ring for use with bare concrete and terrazzo floor applications. NOTE: Only for use on RF6E and RF6E-OG Floor oxes. NOTE: Designed to work with 8T & 8T Series overs only. RF6 Floor ox with FloorPort ctivation over and RF6E Floor ox with Evolution Series over. 11

12 FPTK utout over ssembly FPTZ Flanged cover for use in tile or FPTS carpet installation. Die-cast FPTNK aluminum assembly available in FPTL black (K), bronze (Z), brass (S), FPTGY nickel (NK), gray (GY), or brushed aluminum (L). Insert in lid allows for carpet or tile cutouts to match finished floor. 7 [197mm] FPTK lank over ssembly FPTZ Flanged cover for use in tile or FPTS carpet installation. Die-cast FPTNK aluminum assembly available in FPTL black (K), bronze (Z), brass (S), FPTGY nickel (NK), gray (GY), or brushed aluminum (L). Lid area is flush with the finished floor, no cutouts provided. 7 [197mm] FPTK utout over ssembly FPTZ Flangeless cover for use in tile FPTS installation. Die-cast aluminum FPTNK assembly available in black (K), FPTL bronze (Z), brass (S), nickel (NK), FPTGY gray (GY), or brushed aluminum (L). Insert in lid allows for tile cutouts to match finished floor. 6 [171mm] FloorPort Series over ssemblies for RF2, RF4 & RF6 Series Floor oxes 6 1/2" [165mm] 6 1/2" [165mm] 5 1/2" [140mm] FPFFTK Furniture Feed over ssembly FPFFTZ Flanged cover for use in tile or FPFFTS carpet installation. Die-cast FPFFTNK aluminum assembly available in FPFFTL black (K), bronze (Z), brass (S), FPFFTGY nickel (NK), gray (GY), or brushed aluminum (L). Provided with one trade size screw plug for power or communication type cabling and one combination and 2" trade size screw plug for 7 6 1/2" [197mm] communication type cabling. llows [165mm] for feeding both power and communication cabling. FPFFTK Furniture Feed over ssembly FPFFTZ Flangeless cover for use in tile FPFFTS installation. Die-cast aluminum FPFFTNK assembly available in black (K), FPFFTL bronze (Z) brass (S), nickel (NK), FPFFTGY gray (GY), or brushed aluminum (L). Provided with one trade size screw plug for power or communication type cabling and one combination and 2" trade size screw plug for communication 6 5 1/2" type cabling. llows for feeding both [171mm] [140mm] power and communication cabling. RFKIT arrier Kit arrier kit used to separate power and communication wires in partition feed covers. Supplied with base and three extensions to adjust to cover height. Kit should be used on RF2, RF2-OG, RF2-SS, RF4 and RF4-SS Floor oxes. Kits are sold separately. FPTK lank over ssembly FPTZ Flangeless cover for use in tile FPTS installation. Die-cast aluminum FPTNK assembly available in black (K), FPTL bronze (Z), brass (S), nickel (NK), FPTGY gray (GY), or brushed aluminum (L). Lid area is flush with the finished floor, no cutouts provided. 6 [171mm] 5 1/2" [140mm] RFIKIT RF6KIT arrier Kit arrier kit used with RF4-I Floor oxes. Kits are sold separately. arrier Kit arrier kit used to separate power and communication wires in partition feed covers. FloorPort Partition Feed overs sold separately. Load apacities for FloorPort over ssemblies NOTE: For use with RF6 Series atalog Numbers Maximum Load in Pounds FPT 1000 FPT 750 FPFFT 1000 FPT 1000 FPT 750 FPFFT 1000 NOTE: Load applied through a 2" [51mm] mandrel in center of service fitting. NOTE: Loads above are static loads only and do not pertain to rolling loads. RF4EKIT arrier Kit arrier kit used to separate power and communication services in combination with a 6FFT Furniture Feed over. 12

13 Evolution Series over ssemblies for RF4E & RF4E-OG Floor oxes 6TGY* Surface Style over ssembly 6TK* Die-cast aluminum cover assembly. 6TS* over assembly is available in the 6TZ* following finishes: painted black 6TNK* (K), painted gray (GY), nickel (NK), brass (S), and bronze (Z). 6T Series over ssemblies designed for use with 6ST and 6STP and 6STPV Poke-Thru Stem 7 1/4" ssemblies. [184mm] 6TGY* Flush Style over ssembly 6TK* Die-cast aluminum cover assembly. 6TS* over assembly is available in the 6TZ* following finishes: painted black 6TNK* (K), painted gray (GY), nickel (NK), brass (S), and bronze (Z). 6T Series over ssemblies designed for use with 6ST and 6STP and 6STPV Poke-Thru Stem 7 1/4" ssemblies. Includes one (1) 6TS [184mm] Tile Shim. * dd suffix TR to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. 6FFTGY Furniture Feed over ssembly 6FFTK Surface style, die-cast aluminum 6FFTS cover assembly, with one (1) 6FFTZ trade size screw plug opening, and 6FFTNK one (1) concentric 2"- trade size screw plug opening. over assembly is available in the following powder-coated finishes: (K) black, (GY) gray, (NK) nickel, (S) brass, and (Z) bronze. 7 6FFT Series over ssemblies [197mm] designed for use with 6ST Poke- Thru Stem ssembly. Includes one (1) and one (1) trade size conduit fittings and one (1) divider to separate devices. 6TS Tile Shim Used for floor coverings greater than 5/16" [7.9mm]. The 6TS will allow the top surface of the cover to be flush with the finished floor. Includes: six (6) 1/16" [1.6mm] thick shims and two (2) 1/16" [1.6mm] thick shims. Up to a total of 3/8" [9.5mm] of adjustment. Evolution Series over ssemblies for RF6E & RF6E-OG Floor oxes 8TGY* Surface Style over ssembly 8TK* Die-cast aluminum cover assembly. 8TS* over assembly is available in the 8TZ* following finishes: painted black 8TNK* (K), painted gray (GY), nickel (NK), brass (S), and bronze (Z). 8T Series over ssemblies designed for use with 8ST and 8STP Poke-Thru Stem ssemblies. 8TS Tile Shim Used for floor coverings greater than 5/16" [7.9mm]. The 8TS will allow the top surface of the cover to be flush with the finished floor. Includes: two (2) 1/8" [3.2mm] thick shims and two (2) 1/16" [1.6mm] thick shims. Up to a total of 3/8" [9.5mm] of adjustment. 8TGY* Flush Style over ssembly 8TK* Die-cast aluminum cover assembly. 8TS* over assembly is available in the 8TZ* following finishes: painted black 8TNK* (K), painted gray (GY), nickel (NK), brass (S), and bronze (Z). 8T Series over ssemblies designed for use with 8ST and 8STP Poke-Thru Stem ssemblies. Includes one (1) 8TS Tile Shim. * dd suffix TR to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Load apacities for Evolution Series over ssemblies atalog Maximum Load Numbers in Pounds 6T T FFT T T 1000 NOTE: Load applied through a mandrel in the center of cover assembly. NOTE: Loads above are static loads only and do not pertain to rolling loads. 13

14 N O T E S 14

15 N O T E S 15

16 N O T E S ED771R18 Updated January 2012 For latest specs visit opyright 2012 Legrand/Wiremold ll Rights Reserved 60 Woodlawn Street West Hartford, T Phone: Y.LEGRND ( ) Fax: pplewood rescent Vaughan, Ontario L4K 44 Phone: Fax:

Resource RFB Series Floor Boxes

Resource RFB Series Floor Boxes Resource RF Series Floor oxes Recessed Floor oxes for Wood & oncrete Floors Wiremold Resource RF Series of Floor oxes are versatile activation solutions that provide power, communication and/or audio video