FAS power pre-fabricated. catalog

Size: px

Start display at page:

Download "FAS power pre-fabricated. catalog"

Gilbert Horton
5 years ago
Views:

1 2011 FAS power pre-fabricated wiring assemblies catalog

FAS Power reduces labor costs a minimum of 50% Easy to order Easier to install If you are constructing a hospital, condominium complex, office building or hotel and the wiring project is substantial

With FAS Power, much of the electrical assembly is completed in advance, dramatically cutting project completion times and reducing labor costs a minimum of 50%.

configurator that helps you design and specify the precise parts you need. You can find it on our website at www.faspower.com.

2 FAS Power reduces labor costs a minimum of 50% Easy to order Easier to install If you are constructing a hospital, condominium complex, office building or hotel and the wiring project is substantial or repetitive, look to FAS Power products from Legrand/Cablofil. With FAS Power, much of the electrical assembly is completed in advance, dramatically cutting project completion times and reducing labor costs a minimum of 50%. introduction Table of Contents Introduction pages 1-3 Floor & Wall Bracket Wired Assemblies pages 4-7 Floor & Wall Brackets pages 8-9 Setting up the initial order is also made easy with our online configurator that helps you design and specify the precise parts you need. You can find it on our website at With FAS Power, all of the device choices that you have with standard construction are available, but with the installation ease and labor savings of a prefabricated electrical assembly. Choose from Pass & Seymour PlugTail outlets and switches or our full line of pre-installed devices. You can also specify per-cut lengths of MC cable to be pre-wired into each assembly further reducing installation time. FAS Power will speed up the rough-in phase of your project and inspections will never be easier because every assembly is UL, CUL, ETL or CETL listed. Other Accessories page Wire & Connector Accessories -13 Index page

introduction FAS Power Pre-fabricated Wiring Assemblies Rough-in is fast and easy with FAS Power.

Wall brackets with pre-mounted boxes and rings quickly attach to the stud with switches and switch/outlet

And all assemblies can be pre-wired for fast installation with Pass & Seymour PlugTail outlets and

Assemblies can then be connected to a homerun enclosure mounted to a Cablofil cable pathway.

contractor. Pre-wired with Pass & Seymour PlugTail.

Pre-installed boxes Pre-installed plaster rings are available in 1/2 to 2 raise or adjustable style Far

wire manager FAS Power can benefit you in many ways: Fast job starts FAS Power is packaged and shipped

plaster rings can be specified to fit any wall thickness Pre-wired to MC cable FAS Power assemblies can

device choices at finish or devices can be pre-installed and protected during drywall installation

3 introduction FAS Power Pre-fabricated Wiring Assemblies Rough-in is fast and easy with FAS Power. Pre-fabricated floor brackets slide under the sill plate with no vertical measuring needed. Wall brackets with pre-mounted boxes and rings quickly attach to the stud with switches and switch/outlet combinations in place. And all assemblies can be pre-wired for fast installation with Pass & Seymour PlugTail outlets and switches connected to MC/AC branch circuit wiring using push connector hardware. Assemblies can then be connected to a homerun enclosure mounted to a Cablofil cable pathway. And for fast job starts, FAS Power products are prepackaged and shipped to the requirements of the contractor. Pre-wired with Pass & Seymour PlugTail. introduction Each FAS Power assembly includes: Floor or wall bracket with one to four gang openings Pre-installed boxes Pre-installed plaster rings are available in 1/2 to 2 raise or adjustable style Far side support arms PlugTail or standard devices can be pre-wired to MC/AC cable or packaged separately CJ6 wire manager FAS Power can benefit you in many ways: Fast job starts FAS Power is packaged and shipped per contractor instructions Reduced rough-in time Boxes are pre-mounted and grounded Pre-installed plaster rings can be specified to fit any wall thickness Pre-wired to MC cable FAS Power assemblies can be pre-wired to pre-cut MC/AC cable lengths Wide variety of device choices PlugTail allows you to make device choices at finish or devices can be pre-installed and protected during drywall installation Painless inspections All assemblies are UL, CUL, ETL or CETL listed Faster finishes with pre-wired assemblies, just install your PlugTail outlet/switch or remove the cover from pre-installed devices FAS Power now offers PlugTail switches from Pass & Seymour. Connect to home runs supported by Cablofil Tray

Floor Bracket Wired Assemblies 1 to 4 Openings The FAS Power Floor Bracket Wired Assembly consists of a floor bracket, 4" ring, back side support arm, 4" or 4 11 /16" x in every FAS Power product,

All pre-installed outlets and PlugTail devices are shielded in plastic to keep them finish ready during the taping and painting process.

floor & wall bracket assemblies branch circuits. Legrand/Cablofil uses quality components back side support arm 4 11 /16 x 2 1 /8 Box P&S devices in a variety of colors.

4 Floor Bracket Wired Assemblies 1 to 4 Openings The FAS Power Floor Bracket Wired Assembly consists of a floor bracket, 4" ring, back side support arm, 4" or 4 11 /16" x in every FAS Power product, including P&S PlugTail wiring devices and metallic clad cabling. DOUBLE OPENING FLOOR BRACKET 2 1 /8" boxes and devices,that are pre-wired to MC/AC cable. All pre-installed outlets and PlugTail devices are shielded in plastic to keep them finish ready during the taping and painting process. The boxes are mounted independent of the Installation: The floor bracket is quickly installed by kicking the lower flange under the wall base then securing with screws using predrilled holes in the bracket. At finish, back side support arm CF218 - RPT - D MC ring rings to allow the devices to be used for in-line or multi-wire PlugTail allows you to quickly connect to a wide choice of floor & wall bracket assemblies branch circuits. Legrand/Cablofil uses quality components back side support arm 4 11 /16 x 2 1 /8 Box P&S devices in a variety of colors. SINGLE OPENING FLOOR BRACKET 4 ring single gang receptacle 4 11 /16 x 2 1 /8 Box pushwire connectors floor bracket box mounting single gang receptacle floor & wall bracket assemblies pushwire connectors THREE OPENING FLOOR BRACKET FOUR OPENING FLOOR BRACKET floor bracket box mounting single gang receptacle single opening floor bracket catalog numbering example: CF RPT MC122-1 box mounting box mounting Bracket Type CF1 Floor Bracket, Wired with Pushwire Connectors, (1) Opening Floor Brackets are available with 1 thru 4 openings Box Mounting Height Box mounting s are available at 12, 1, 18 and 24 Wiring Components Ring For a comprehensive list of floor bracket wiring assembly options, use our handy configurator at Back Side Arm Support MC Cable (First, Second, Third, Fourth Opening) single gang receptacle CF318 - RpT - D - D MC122-1 CF418 - RPT - D D MC

Wall Bracket Wiring Assemblies 1 to 4 Openings The FAS Power Wall Bracket Wired Assembly consists of a wall bracket, 4" ring, back side

THREE OPENING WALL BRACKET WIRED ASSEMBLY 2 1 /8" boxes and devices, that are pre-wired to MC/AC cable.

plastic to keep them finish ready during the taping and painting process. screws using predrilled holes in the bracket.

plugtail cw3 - SGPT - 0-0 - 058-350 - mc122 / mc122-1 FOUR OPENING WALL BRACKET WIRED ASSEMBLY 26 S G F I floor & wall bracket assemblies

bracket catalog numbering example: Cw1 - SSPT - 058-350 - MC202/MC202-1 Bracket Type CF1 Floor Bracket, Wired with Pushwire Connectors, (1)

5 Wall Bracket Wiring Assemblies 1 to 4 Openings The FAS Power Wall Bracket Wired Assembly consists of a wall bracket, 4" ring, back side support arm, 4" or 4 11 /16" x FAS Power product, including P&S PlugTail wiring devices and metallic clad cabling. THREE OPENING WALL BRACKET WIRED ASSEMBLY 2 1 /8" boxes and devices, that are pre-wired to MC/AC cable. All pre-installed outlets, switches and Installation: The wall bracket is quickly installed with 16 PlugTail devices are shielded in plastic to keep them finish ready during the taping and painting process. screws using predrilled holes in the bracket. At finish, PlugTail allows you to quickly connect to a wide choice Legrand/Cablofil uses quality components in every of Pass & Seymour devices in a variety of colors. floor & wall bracket assemblies 4 11 /16 x 2 1 /8 Box back side support arm SINGLE OPENING WALL BRACKET WIRED ASSEMBLY 4 ring wall bracket plugtail cw3 - SGPT mc122 / mc122-1 FOUR OPENING WALL BRACKET WIRED ASSEMBLY 26 S G F I floor & wall bracket assemblies single pole switches pushwire connectors cw4-0 - J J 9 1 /2 3/4 GANG WALL BRACKET WIRED ASSEMBLY S S 26 single opening WALL bracket catalog numbering example: Cw1 - SSPT MC202/MC202-1 Bracket Type CF1 Floor Bracket, Wired with Pushwire Connectors, (1) Opening Wiring Components Plaster Ring Back Side Arm Support MC Cable (First, Second, Third, Fourth Opening) Wall Brackets are available with 1 thru 4 openings For a comprehensive list of wall bracket wiring assembly options, use our handy configurator at cw34 - SSSPT S S S 6 7

Floor & Wall Brackets floor & wall brackets The Floor Bracket is the centerpiece of our product line and represents

The design permits fast installation anywhere between studs and ensures correct device mounting with no measuring

Two holes are provided for attachment screws if needed.

Floor Brackets: 16 gage galvanized steel.

No attachment hardware is required. Purchased separately.

Support Arms (purchased separately) are attached to the back of the Bracket using the two slots provided.

Attachment Holes for 4 11 /16 x 2 1 /8 Boxes allow 4 Rings to be mounted independently. PRODUCT NO.

F312 3 12 F315 3 1 F318 3 18 F324 3 24 F412 4 12 F415 4 1 F418 4 18 The Wall Bracket offers unsurpassed versatility

Installation: The Wall Bracket is quickly installed with screws using the holes provided in the bracket.

Wall Brackets: 18 gage galvanized steel.

6 Floor & Wall Brackets floor & wall brackets The Floor Bracket is the centerpiece of our product line and represents the latest innovation by our Wiring Systems. The design permits fast installation anywhere between studs and ensures correct device mounting with no measuring required. Installation: The Floor Bracket is installed by kicking the lower flange under the wall base. Two holes are provided for attachment screws if needed. Accepts 4 and rings, and 4 and 4 11 /16 square boxes mounted horizontally or vertically. Floor Brackets: 16 gage galvanized steel. Support Arms: Attach to the back of the Floor Bracket to support the assembly against the wall behind. No attachment hardware is required. Purchased separately. Keyhole openings allow 4 or 4 11 /16 x 2 1 /8 boxes to remain attached. Support Arms (purchased separately) are attached to the back of the Bracket using the two slots provided. Attachment Holes for 4 Rings allows 4 11 /16 x 2 1 /8 Boxes to be mounted independently. Attachment Holes for 4 11 /16 x 2 1 /8 Boxes allow 4 Rings to be mounted independently. PRODUCT NO. (EA) FLOOR BRACKETS GANG CENTER HEIGHT F F F F F F F F F F F F F F F The Wall Bracket offers unsurpassed versatility for the installation of electrical boxes anywhere between studs at any. Installation: The Wall Bracket is quickly installed with screws using the holes provided in the bracket. Accepts 4 and rings, and 4 and 4 11 /16 x 2 1 /8 boxes mounted horizontally or vertically. Wall Brackets: 18 gage galvanized steel. Support Arms: Attach to the back of the Wall Bracket to support the assembly against the wall behind. No attachment hardware is required. Purchased separately. (Not required for W16SSL and W24SSL) W1 9 1 /2 Wall Bracket attachment holes Keyhole openings allow boxes to remain attached to the Bracket when the rings are removed. Support Arms (purchased separately) are attached to the back of the Bracket using the two slots provided. Attachment Holes for 4 Rings allow 4 11 /16 x 2 1 /8 boxes to be mounted. wall BRACKETS PRODUCT NO. (EA) GANG W1 1 W3 3 W4 4 W34 3 W16SSL 16 Slider W24SSL 24 Slider floor & wall brackets F W16SSL W24SSL center F1 F2 F3 F W3 W4 W

Accessories Covers & Adjustable Rings Support Arms & Pushwire Connectors other accessories DCP-1T DCP-2 Plastic Device Covers attach to the front of receptacles, switches or can be snapped onto empty

(EA) plastic device covers box size / DEVICE TYPE FASTENERS included DCP-1 Single gang receptacle (2) #8-32 screws DCP-2 Double gang receptacle (2) #8-32 screws DCP-3 three gang receptacle (2) #8-32

DCP-4T Four gang toggle switch (2) #8-32 screws PC-2-YL AR-350 PC-4-OR PC-6-GR Support Arms attach to the back of Floor, Wall, and Universal Brackets to support the assembly against the wall behind

(EA) PI-32-RD SUPPORT ARMS PI-34-YL WALL DEPTH AR-300 3 AR-350 3 1 / 2 AR-400 4 AR-450 4 1 / 2 AR-500 AR-550 5 1 / 2 AR-600 6 AR-650 6 1 / 2 other accessories DCP-3R DCP-DT DBL.

only None DCP-R 3" Round plaster ring only None Adjustable Rings are useful in installation where wall thicknesses are unknown at the time of order or Pushwire Connectors make the job of connecting

The clear housing allows for visual inspection to ensure the proper connection of stranded or solid conductors. Integrated test ports allow for circuit testing under an energized condition.

All In-Sure wire connectors accept either stranded or solid wires and include stainless steel inserts that restrict pull-out. Built-in check ports allow for continuity testing.

7 Accessories Covers & Adjustable Rings Support Arms & Pushwire Connectors other accessories DCP-1T DCP-2 Plastic Device Covers attach to the front of receptacles, switches or can be snapped onto empty mud rings to keep them clean, dust free and finish ready during the taping and painting process. The covers are replaced later with faceplates at the trim out phase of construction. PRODUCT NO. (EA) plastic device covers box size / DEVICE TYPE FASTENERS included DCP-1 Single gang receptacle (2) #8-32 screws DCP-2 Double gang receptacle (2) #8-32 screws DCP-3 three gang receptacle (2) #8-32 screws DCP-4 four gang receptacle (2) #8-32 screws DCP-1T Single gang toggle switch (2) #8-32 screws DCP-2T Double gang toggle switch (2) #8-32 screws DCP-3T Three gang toggle switch (2) #8-32 screws DCP-4T Four gang toggle switch (2) #8-32 screws PC-2-YL AR-350 PC-4-OR PC-6-GR Support Arms attach to the back of Floor, Wall, and Universal Brackets to support the assembly against the wall behind the devices. No attachment hardware is required. Material: Zinc-plated steel. PI-42-OR PRODUCT NO. (EA) PI-32-RD SUPPORT ARMS PI-34-YL WALL DEPTH AR AR / 2 AR AR / 2 AR-500 AR / 2 AR AR / 2 other accessories DCP-3R DCP-DT DBL. gang toggle switch & device (2) #8-32 screws DCP-1R Single gang plaster ring only None DCP-2R Double gang plaster ring only None DCP-3R Three gang plaster ring only None DCP-4R Four gang plaster ring only None DCP-R 3" Round plaster ring only None Adjustable Rings are useful in installation where wall thicknesses are unknown at the time of order or Pushwire Connectors make the job of connecting wires easier and more reliable than ever before. Simply strip the wire, insert the conductor into the connector and you have a solid connection. The clear housing allows for visual inspection to ensure the proper connection of stranded or solid conductors. Integrated test ports allow for circuit testing under an energized condition. PI-39-BL In-Sure Push-In Wire Connectors features an easygrip design that combined with a low insertion force makes repetitive electrical connections fast and easy. All In-Sure wire connectors accept either stranded or solid wires and include stainless steel inserts that restrict pull-out. Built-in check ports allow for continuity testing. APR-1 APR-2 electrical rough in. Material: Galvanized steel. adjustable rings PRODUCT NO. (EA) DEVICE TYPE raise apr-1-5/8 single gang 5 / 8 TO 1 1 / 4 apr-1 single gang 3 / 4 TO 1 1 / 2 apr-2 two gang 5 / 8 TO 1 1 / 2 APR-3 three gang 3 / 4 TO 1 1 / 2 apr-r 3-0 round 3 / 4 TO 1 1 / 2 PUSHWIRE CONNECTORS PRODUCT NO. (EA) GANG COLOR PC-2-YL 2 YELLOW PC-4-OR 4 ORANGE PC-6-PL 6 PURPLE PC-8-GY 8 GRAY PC-6-GR 6 GREEN PC-8-GR 8 GREEN Wire Size Range AWG Copper Solid Conductors AWG Copper Stranded Conductors In-sure PUSHWIRE CONNECTORS PRODUCT NO. (EA) GANG COLOR PI-42-OR 1 Orange PI-32-RD 2 Red PI-33-OR 3 Orange PI-34-YL 4 Yellow Wire Size Range AWG Solid AWG Stranded (19 strand or less) 18 AWG Stranded (7 strand) AWG Stranded Tin-Bonded (19 strand or less) PI-39-BL 3 Blue APR-3 APR-R All push style connectors used in FAS Power assemblies conform to these standards: Voltage Rating: 600 Volts, 1000 Volts for fixtures and signs Current Rating: Matches the largest conductor used Temperature Rating: 105 Degrees C Wire Size Range AWG Solid AWG Stranded (19 strand or less) AWG Stranded Tin-Bonded (19 strand or less)

FAS Power Components Wire & Connector Accessories wire & connector accessories OUTLETS Wall Floor PLASTER RINGs R Duplex Outlet l l 050 ½ raise RPT PlugTail for Duplex Outlet l l 058 5 / 8 raise RR 2

1 / 2 raise RRTR 2 Tamper Resistant Duplex Outlets l l 200 2 raise RRTRPT PlugTail for 2 Tamper Resistant Duplex Outlets l l APR Adjustable RHG Hospital Grade Duplex Outlet l l RHGPT PlugTail for

Hot l l 300 3 wall depth R/SLPT PlugTail for Duplex Outlet - Half Hot l l 350 3 ½ wall depth G Duplex GFCI Outlet l l 400 4 wall depth GPT PlugTail for Duplex GFCI Outlet l l 450 4 ½ wall depth GG 2

8 FAS Power Components Wire & Connector Accessories wire & connector accessories OUTLETS Wall Floor PLASTER RINGs R Duplex Outlet l l 050 ½ raise RPT PlugTail for Duplex Outlet l l / 8 raise RR 2 Duplex Outlets l l 075 ¾ raise RRPT PlugTail for 2 Duplex Outlets l l raise RTR Tamper Resistant Duplex Outlet l l / 4 raise RTRPT PlugTail for Tamper Resistant Duplex Outlet l l / 2 raise RRTR 2 Tamper Resistant Duplex Outlets l l raise RRTRPT PlugTail for 2 Tamper Resistant Duplex Outlets l l APR Adjustable RHG Hospital Grade Duplex Outlet l l RHGPT PlugTail for Hospital Grade Duplex Outlet l l RRHG 2 Hospital Grade Duplex Outlets l l BACK SIDE ARM SUPPORT RRHGPT PlugTail for 2 Hospital Grade Duplex Outlets l l ½ wall depth R/SL Duplex Outlet - Half Hot l l wall depth R/SLPT PlugTail for Duplex Outlet - Half Hot l l ½ wall depth G Duplex GFCI Outlet l l wall depth GPT PlugTail for Duplex GFCI Outlet l l ½ wall depth GG 2 Duplex GFCI Oulets l l 500 wall depth GGPT PlugTail for 2 Duplex GFCI Oulets l l ½ wall depth GTR Tamper Resistant Duplex GFCI Outlet l l wall depth GTRPT PlugTail for Tamper Resistant Duplex GFCI Outlet l l GHG Hospital Grade Duplex GFCI Outlet l l GHGPT PlugTail for Hospital Grade Duplex GFCI Outlet l l MC CABLE type conductors SG 1 Single Pole & Duplex GFCI Outlet l Stranded SGPT PlugTail for 1 Single Pole & Duplex GFCI Outlet l Solid RIG Isolated Ground Duplex Outlet l l hcf Stranded RIGPT PlugTail for Isolated Ground Duplex Outlet l l hcf Solid 12/2 RRIG 2 Isolated Ground Duplex Outlets l l Stranded ap RRIGPT PlugTail for 2 Isolated Ground Duplex Outlets l l Solid ap 12/3 SWITCHES hcf Stranded ap 12/4 hcf Solid ap S Single-Pole Switch l ig Stranded SPT PlugTail for Single-Pole Switch l S3 Three-Way Switch l ig Solid S3PT PlugTail for Three-Way Switch l SS 2 Single-Pole Switches l AC CABLE type conductors SSPT PlugTail for 2 Single-Pole Switches l Stranded 12/2 S3S3 2 Three-Way Switches l Solid S3S3PT PlugTail for 2 Three-Way Switches l 12/3 ig Stranded SS3 1 Single Pole and 1 Three-Way Switch l ig Solid 12/4 SS3PT PlugTail for 1 Single Pole and 1 Three-Way Switch l MC CABLE D 1 Gang Ring and 4 Box l l DGP 1 Gang Ring and 4 Box with Ground Pigtail l l DD 2 Gang Ring and 4 Box l l DDGP 2 Gang Ring and 4 Box with Ground Pigtail l l T 1 Gang Ring Only l l TT 2 Gang Ring Only l l J Junction Box l 4S0 4 Box Only l l 5S0 Box Only l l Legrand /Pass & Seymour devices meeting the demands of any project. Specify MC/AC cable with each FAS Power assembly and gain a competitive edge on your next project. Save cutting, stripping, connection time and reduce scrap with MC/AC cable attached to FAS Power prewired assemblies. Specify any length of MC/AC cable up to 99 feet in stranded or solid conductor types. IG and HCF versions are also available. MC/AC cable types are available with aluminum and steel jackets in 10/2, 10/3 and 10/4 gauges. Index Almost any device can be specified and pre-wired into FAS Power assemblies including GFCI, HCF and Tamper-Resistant devices available in decorator styles and 15 to 20 amp options. Every installed device is protected with a plastic shield that keeps them clean, dust free and finish-ready. Also available is P&S PlugTail the fastest, most reliable device installation ever. Install a PlugTail connector instead of pigtails. At finish, select from a wide array of color choices for any device. For more information go to: Apr-1-5/8... Single Gang Adjustable Ring...11 Apr-1... Single Gang Adjustable Ring...11 Apr-2... Two Gang Adjustable Ring...11 Apr-3... Three Gang Adjustable Ring...11 Apr-r Gang Adjustable Ring...11 ar " Support Arm...11 ar / 2" Support Arm...11 ar " Support Arm...11 ar / 2" Support Arm...11 ar " Support Arm...11 ar / 2" Support Arm...11 ar " Support Arm...11 ar / 2" Support Arm...11 DCP-1... Single Gang Receptacle...10 DCP-2... Double Gang Receptacle...10 DCP-3... Three Gang Receptacle...10 DCP-4... Four Gang Receptacle...10 DCP-1T... Single Gang Toggle Switch...10 DCP-2T... Double Gang Toggle Switch...10 DCP-3T... Three Gang Toggle Switch...10 DCP-4T... Four Gang Toggle Switch...10 DCP-DT... Double Gang Toggle Switch & Device...10 DCP-1R... Single Gang Plaster Ring Only...10 DCP-2R... Double Gang Plaster Ring Only...10 DCP-3R... Three Gang Plaster Ring Only...10 DCP-4R... Four Gang Plaster Ring Only...10 DCP-R... 3 Round Plaster Ring Only...10 F " Single Gang Floor Bracket...8 F " Single Gang Floor Bracket...8 F " Single Gang Floor Bracket " Single Opening Floor Bracket Assembly...4 F " Single Gang Floor Bracket...8 F " Two Gang Floor Bracket...8 F " Two Gang Floor Bracket...8 F " Two Gang Floor Bracket " Two Opening Floor Bracket Assembly...5 F " Two Gang Floor Bracket...8 F " Three Gang Floor Bracket...8 F " Three Gang Floor Bracket...8 F " Three Gang Floor Bracket " Three Opening Floor Bracket Assembly...5 F " Three Gang Floor Bracket...8 F " Four Gang Floor Bracket...8 F " Four Gang Floor Bracket...8 F " Four Gang Floor Bracket " Four Opening Floor Bracket Assembly...5 F " Four Gang Floor Bracket...8 PC-2-YL... Two Gang Pushwire Connector (Yellow)...11 PC-4-or... Four Gang Pushwire Connector (Orange)...11 PC-6-pl... Six Gang Pushwire Connector (Purple)...11 PC-8-gy... Eight Gang Pushwire Connector (Gray)...11 PC-6-gr... Six Gang Pushwire Connector (Green)...11 PC-8-gr... Eight Gang Pushwire Connector (Green)...11 PI-42-OR... Single Gang InSure Pushwire Connector...11 PI-32-RD... Two Gang InSure Pushwire Connector...11 PI-33-OR... Three Gang InSure Pushwire Connector...11 PI-34-YL... Four Gang InSure Pushwire Connector...11 PI-39-BL... Three Gang InSure Pushwire Connector...11 W1... Single Gang Wall Bracket...9 Single Opening Wall Bracket Assembly...6 W3... Three Gang Wall Bracket...9 Three Opening Wall Bracket Assembly...7 W4... Four Gang Wall Bracket...9 Four Opening Wall Bracket Assembly...7 W /4 Gang Wall Bracket...9 3/4 Gang Wall Bracket Assembly...7 W16SSL... 16" Slider Wall Bracket...9 W24sSl... 24" Slider Wall Bracket...9 wire & connector accessories

legrand/cablofil Market Proven Products, Jobsite-tested Productivity Legrand/Cablofil has the cable management system to handle any project; from interior data cable management to heavy-duty power

Cablofil - The world s most specified wire mesh cable tray Cablofil wire mesh cable tray is constructed of precision-engineered high quality welded steel wire.

9 legrand/cablofil Market Proven Products, Jobsite-tested Productivity Legrand/Cablofil has the cable management system to handle any project; from interior data cable management to heavy-duty power installations and each are designed to install efficiently to increase your productivity. Cablofil - The world s most specified wire mesh cable tray Cablofil wire mesh cable tray is constructed of precision-engineered high quality welded steel wire. It has been subjected to decades of testing and has seen widespread use with more that 94,000 miles installed worldwide. In actual use it performs in a wide variety of applications from supporting heavy power cables on oil drilling platforms in the North Sea to modern office buildings that support bundles of data cabling. Cablofil Ladder Tray - For extreme loads and long spans Our cable tray line includes Ladder Tray, Center Spine Tray and Channel Tray. Also available, long span/heavy duty cable tray designed with steel I-beam side rails to support cables and tubing for outdoor industrial applications, roadway crossings and pipe bridges. Now, more than ever, Legrand/Cablofil is your complete resource for all cable management products. Legrand/Cablofil 8319 State Route 4 Mascoutah, IL Legrand All Rights Reserved 0211 Legrand, North America 60 Woodlawn Street West Hartford, CT BY.LEGRAND ( ) Applewood Crescent Vaughan, Ontario L4K 4B

Metal Raceway Systems. tomorrow. Wiremold Metal Raceway. Innovative from Day One.

Metal Raceway Systems. tomorrow. Wiremold Metal Raceway. Innovative from Day One. Metal Raceway Systems tomorrow 1916 Wiremold Metal Raceway. Innovative from Day One. Wiremold metal raceway has been defining the category for close to a century. Offering the broadest, most innovative