See page 59 for complete parts list for all kits.
|
|
|
- Elfreda Atkins
- 5 years ago
- Views:
Transcription
1 ELECTRIC & BATTERY-POWERED KNOCKOUT KITS Gator Plus Battery-Powered Knockout Punch Driver Kits SPECIFICATIONS Weight (driver with battery only) Overall Length (ram retracted) Height Maximum Punch Force Maximum Round Punch Size Maximum Square Punch Size Maximum Rectangular Punch Size (in 10 gauge mild steel) Maximum Ram Travel Charging Time Battery Voltage STEEL CAPACITIES FOR CONDUIT SIZES 1 LS6011A STUD AND 1/2" 3/4" 1-7/32" 1" 1-1/4" 1-1/2" 2" 1/2" 3/4" 1-7/32" 1" 1-1/4" 1-1/2" 2" ACCESSORIES CON. CON. CON. CON. CON. CON. CON. CON. CON. CON. CON. CON. Ø 0.885" Ø 1.115" Ø 1.210" Ø 1.362" Ø 1.701" Ø 1.951" Ø 2.415" Ø 0.885" Ø 1.115" Ø 1.210" Ø 1.362" Ø 1.701" Ø 1.951" Ø 2.416" 22.5mm 28.3mm 30.5mm 34.6mm 43.2mm 49.6mm 61.5mm 22.5mm 28.3mm 30.5mm 34.6mm 43.2mm 49.6mm 61.5mm 1614SS Draw Stud /16" Draw Stud 8.25 lbs. (3.7 kg) 10.3 in. (262 mm) sold separately. See page 73 for ordering information in. (292 mm) 6.7 tons (60 kn) 2.42 in. dia. (61.5 mm dia) 2-11/16 in. x 2-11/16 in. (68.0 x 68.0 mm) x in. (35.0 x 65.0 mm) 0.87 in (22 mm) Approximately 1 hour 12 V, 2.6Ah, NIMH shuts off to prevent damage to the punch and die. (61.5 mm) size holes in 10-gauge (3.5 mm) mild steel and 12-gauge (2.5 mm) stainless steel. Punches approximately (80) 1/2" conduit size holes or (40) 2" conduit size holes in 10-gauge mild steel per battery charge. CAT. NO. UPC NO. DESCRIPTION LBS. kg. LS6011A Battery-powered driver with 120 volt charger, LS6012A Battery-powered driver with 12 volt charger, LS6022A Battery-powered driver with 220 volt charger, LS6011B Battery-powered driver with 120 volt charger, LS6012B Battery-powered driver with 12 volt charger, LS6022B Battery-powered driver with 220 volt charger, V NIMH Battery MKLS Carrying Case See page 59 for complete parts list for all kits. Electronic Connector Punches RS-232, 229, 231, 234, GA. (0.1345" [3.5 mm]) MILD STEEL 10 GA. (0.1345" [3.5 mm]) STAINLESS STEEL 12 GA. (0.1046" [2.5 mm]) STAINLESS STEEL 16 GA. (0.0598" [1.5 mm]) MILD STEEL AND 1/8" ALUMINUM 57
2 Gator Plus Corded Knockout Punch Driver Kits SPECIFICATIONS IONS Weight (driver with battery only) Overall Length (ram retracted) Height Maximum Punch Force Maximum Round Punch Size Maximum Square Punch Size Maximum Rectangular Punch Size Maximum Ram Travel Operating Voltage STEEL CAPACITIES FOR CONDUIT SIZES STUD AND 1/2" 3/4" 1-7/32" 1" 1-1/4" 1-1/2" 2" 1/2" 3/4" 1-7/32" 1" 1-1/4" 1-1/2" 2" ACCESSORIES CON. CON. CON. CON. CON. CON. CON. CON. CON. CON. CON. CON. Ø 0.885" Ø 1.115" Ø 1.210" Ø 1.362" Ø 1.701" Ø 1.951" Ø 2.415" Ø 0.885" Ø 1.115" Ø 1.210" Ø 1.362" Ø 1.701" Ø 1.951" Ø 2.416" 22.5mm 28.3mm 30.5mm 34.6mm 43.2mm 49.6mm 61.5mm 22.5mm 28.3mm 30.5mm 34.6mm 43.2mm 49.6mm 61.5mm 1614SS Draw Stud /16" Draw Stud 8.25 lbs. (3.7 kg) 10.3 in. (262 mm) 11.5 in. (292 mm) 6.7 tons (60 kn) 2.42 in. dia. (61.5 mm dia) 2-11/16 in. x 2-11/16 in. (68.0 x 68.0 mm) x in. (35.0 x 65.0 mm) 0.87 in (22 mm) shuts off to prevent damage to the punch and die. 2" conduit (61.5 mm) size holes in 10-gauge (3.5 mm) mild steel and 12-gauge (2.5 mm) stainless steel. No need to charge batteries or worry about running out of power. CAT. NO. UPC NO. DESCRIPTION LBS. kg CLS6011A Corded Driver, 120 Volts/60Hz, with 2 Draw Studs,. CLS6022A Corded Driver, 230 Volts/50Hz, with 2 Draw Studs,. CLS6011B Corded Driver, 120 Volts/60Hz, with /2" through 2" Slug-Buster Conduit Size Punches, 2 Draw Studs, 1 Adapter, 1 Spacer and Case. CLS6022B Corded Driver, 230 Volts/50Hz, with /2" through 2" Slug-Buster Conduit Size Punches, 2 Draw Studs, 1 Adapter, 1 Spacer and Case. MKNLS Carrying Case See page 59 for complete parts list for all kits. Electronic Connector Punches RS-232, 229, 231, 234, sold separately. See page 73 for ordering information. 10 GA. (0.1345" [3.5 mm]) MILD STEEL 10 GA. (0.1345" [3.5 mm]) STAINLESS STEEL 12 GA. (0.1046" [2.5 mm]) STAINLESS STEEL 16 GA. (0.0598" [1.5 mm]) MILD STEEL AND 1/8" ALUMINUM 58
3 Battery-Powered Knockout Punch Driver Kits Parts List Punches and Dies Draw Studs and Misc. HOLE SIZE KIT CAT./UPC NO. CONDUIT LS6011A/03557 LS6011B/04311 & PIPE ACTUAL LS6012A/03558 LS6012B/04661 CLS6011A CLS6011B CAT. NO. UPC NO. DESCRIPTION SIZE Ø INCH Ø mm PG LS6022A/03559 LS6022B/04312 CLS6022A CLS6022B 721-1/ /2" Conduit Size Slug-Buster Punch 1/2" 7/ /2" Conduit Size Die 1/2" 7/ / /4" Conduit Size Slug-Buster Punch 3/4" AV /4" Conduit Size Die 3/4" " Conduit Size Slug-Buster Punch 1" AV " Conduit Size Die 1" / /4" Conduit Size Slug-Buster Punch 1-1/4" 1-11/ AV /4" Conduit Size Die 1-1/4" 1-11/ / /2" Conduit Size Slug-Buster Punch 1-1/2" 1-15/ AV /2" Conduit Size Die 1-1/2" 1-15/ " Conduit Size Slug-Buster Punch 2" 2-3/ AV " Conduit Size Die 2" 2-3/ SS Draw Stud 3/8" x 2-13/16" Draw Stud 3/4" x 4-1/8" 1924AA Spacer-Short Stud Adapter 3/8" Metal Case MKLS Case for LS60 Optional Accessories for LS6011B, LS6012B, and LS6022B (not included in kits) Draw Stud 7/16" x 4-1/2" for Slug Splitter SC Stainless Steel Punches 59
4 HYDRAULIC KNOCKOUT KITS Quick Draw Hydraulic Punch Driver and Kits 7706SB Flex Driver Kit 7806SB Quick Draw Kit 7906SB Quick Draw 90 Kit STEEL EL CAPACITIES FOR CONDUIT SIZES REQUIRED DRAW STUD AND 1/2" 3/4" 1-7/32" 1" 1-1/4" 1-1/2" 2" 1/2" 3/4" 1-7/32" 1-1/4" ACCESSORIES OILTIGHT OILTIGHT 3/8" Draw Stud Spacer & 7/16" Draw Stud Spacer & 3/4" Draw Stud The Quick Draw, Quick Draw 90, and Quick Draw Flex feature: one-person operation. 10-gauge stainless steel, depending on individual punch capacities. is perfect for fast, straight-on front panel punching. s right angle driver head rotates over 180 degrees for maximum flexibility in tight working areas. Flex allows unlimited driver orientation to simplify access to work area. (adapter may be required). CAT. NO. UPC NO. DESCRIPTION LBS. kg. 7704SB Quick Draw Flex Driver, 2 Draw Studs, SB Standard Quick Draw Flex Driver, 1/2" through " Slug-Buster Conduit Size Punches and Dies, 7804SB Quick Draw Driver, 2 Draw Studs, 1 Adapter, Spacer and Case 7806SB Standard Quick Draw Driver, 1/2" through 2" Slug-Buster Conduit Size Punches and Dies 7804E Metric Quick Draw Driver, 2 Draw Studs, ESB Metric Quick Draw Driver, Slug-Buster Pg Punches and Dies 15.2 mm through 30.5 mm, 7804ISO Metric Quick Draw Driver, Slug-Buster ISO Punches and Dies 16.2 mm through 40.5 mm, 7904SB Quick Draw 90 Driver, 2 Draw Studs, SB Quick Draw 90 Driver, 1/2" through 2" Slug-Buster Conduit Size Punches and Dies, Draw Studs, 7904E Metric Quick Draw 90 Driver, 2 Draw Studs, ESB Metric Quick Draw 90 Driver, Slug-Buster Pg Punches and Dies 15.2 mm through 30.5 mm, 7904ISO Metric Quick Draw 90 Driver, Slug-Buster ISO Punches and Dies 16.2 mm through 40.5 mm, Plastic Case See page 61 for complete parts list for all kits. 3/4" Draw Stud GA. MILD STEEL 10 GA. STAINLESS STEEL
5 Parts List for Quick Draw, Quick Draw 90 and Quick Draw Flex Kits Punches and Dies Draw Studs and Misc. CONDUIT HOLE SIZE KIT CAT./UPC NO. & PIPE ACTUAL 7704SB/ 7706SB/ 7804E/ 7804ESB/ 7804ISO/ 7804SB/ 7806SB/ 7904E/ 7904ESB/ 7904ISO/ 7904SB/ 7906SB/ CAT. NO. UPC NO. DESCRIPTION SIZE Ø INCH Ø mm PG ISO / /2" Conduit Size Slug-Buster Punch 1/2" 7/ /2" Conduit Size Die 1/2" 7/ / /4" Conduit Size Slug-Buster Punch 3/4" AV /4" Conduit Size Die 3/4" " Conduit Size Slug-Buster Punch 1" AV " Conduit Size Die 1" / /4" Conduit Size Slug-Buster Punch 1-1/4" 1-11/ AV /4" Conduit Size Die 1-1/4" 1-11/ / /2" Conduit Size Slug-Buster Punch 1-1/2" 1-15/ AV /2" Conduit Size Die 1-1/2" 1-15/ " Conduit Size Slug-Buster Punch 2" 2-3/ AV " Conduit Size Die 2" 2-3/ Slug-Buster Punch Die Slug-Buster Punch Die Slug-Buster Punch Die Slug-Buster Punch 3/4" Die 3/4" mm Slug-Buster Punch 1-7/ mm Die 1-7/ ISO-16 Slug-Buster Punch ISO-16 Die ISO-25 Slug-Buster Punch ISO-25 Die ISO-32 Slug-Buster Punch ISO-32 Die ISO-40 Slug-Buster Punch ISO-40 Die Quick Draw Hydraulic Punch Driver Quick Draw 90 Hydraulic Punch Driver Quick Draw Flex Driver 1614SS Draw Stud 3/8" x 2-13/16" Draw Stud 3/4" x 4-1/8" 1924AA Spacer-Short Stud Adapter 3/8" Plastic Case Plastic Case Plastic Case Optional Accessories for 7806SB, 7804E, 7804ESB, 7804ISO, 7906SB, 7904E, 7904ESB and 7904ISO Kits (not included in kits) /16" (11.1 mm) Stainless Steel Draw Stud 61
LS100L Battery-powered Punch Driver
OPERATION MANUAL Serial Number GATOR LS100L Battery-powered Driver Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
Battery-powered hydraulic punch driver with 360 rotating head
www.klauke.com LS 50-L FLEX Battery-powered hydraulic punch driver with 360 rotating head LS 50-L FLEX Battery-powered hydraulic punch driver Flexible and light. Flexible aluminium head 360 rotating head
Standard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
Model No. Model No. Complete. Punch
PUNCH & DIES OILTIGHT & KEYWAY SPECIAL APPLICATION HAND OPERATED PUNCHES Oiltight es with Notches A B C Max Capacity Type BB Drive Hole Optional Adapt for 22.5 3.2 25.4 2.0 Hand-Hyd 60238 60239 60250 60117
Armoured Cable/Flex. Conduit
Armoured Cable/Flex. Conduit Connectors Fittings & Accessories Grounding Trade Clamping Range Suggested Application Flex. Cat. No. Size min. max. AC90 (BX) Conduit CI70 CI71 / CI73 CI2210 / CI2236 L-16
TABLE OF CONTENTS BENDING SAWING HOLEMAKING
TABLE OF CONTENTS BENDING Offset Benders...1-2 Mechanical Benders...3-4 Combination Mechanical Bender...5 Bending Work Station...6-7 77 Series Electric Bender with Single Shoe Groups...8-9 77 Series Electric
APPLICATION SOLUTIONS CONTROL CABINET AND CONTROL ENGINEERING
APPLICATION SOLUTIONS CONTROL CABINET AND CONTROL ENGINEERING HAND-OPERATED HYDRAULIC PUNCHES COMPACT COMPACTCOMBI COMPACT FLEX AKKU-COMPACT AKKU-COMPACT FLEX 02001 02050 02065 02070 02082 Max. punching
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER. Industrial Equipment Rental & Service
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER Industrial Equipment Rental & Service Our sales, repair, and customer service teams received extensive training from Greenlee for the full line of products
EK1240KL Battery-powered Crimping Tool
OPERATION MANUAL GATOR EK1240KL Battery-powered Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
COMPACT HYDRAULIC PUNCHER
INSTRUCTION MANUAL COMPACT HYDRAULIC PUNCHER Art. 21 67 50 DIN EN ISO 9001 QZERTIFIKAT...convincing solutions 1. TECHNICAL CHARACTERISTICS Maximum cutting capacity: Ø 60 mm. 3 mm thick steel plate 46 x
» SCREW-HOLE PUNCHES
» SCREW-HOLE PUNCHES Screw-hole Cuts holes in thin materials quickly, easily, cleanly and without burrs in a few simple operations. Three-point cut gives improved contact and thus less deformation of the
EPIC. Connector Accessories CONNECTOR ACCESSORIES. Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands
CONNECTOR ACCESSORIES Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands D Series Pressure Screws 413 U Series Washers 413 Sealing Rings 413 Neoprene & Viton Concentric Sealing
PRO E12CCX 12-ton Battery-powered, High-speed Tool
INSTRUCTION MANUAL Serialnummer GATOR PRO E12CCX 12-ton Battery-powered, High-speed Tool Read and understand all of the instructions and safety information in this manual before operating or servicing
GATOR Battery-powered In-line Cutters
OPERATION MANUAL Serialnummer (ES20L shown) GATOR Battery-powered In-line Cutters Read and understand all of the instructions and safety information in this manual before operating or servicing this tool.
Lithium-Ion Battery-Powered Tools
Lithium-Ion Battery-Powered Tools Thomas & Betts. Your best connection for innovative solutions. Wire & Cable Management Cable Protection Systems Power Connection & Control S a f e t y Te c h n o l o g
Meets requirements of Safety for Handheld, Motor-Operated Electric Tools (UL , CSA C22.2 No )
Meets OSHA Mandated Electrical and Mechanical Product Safety Requirements Certified by CSA, an OSHA accredited NRTL (nationally recognized test lab) to meet mandatory OSHA requirements Meets requirements
Universal tools. Hand-operated hydraulic universal tool, hydraulic universal head 472. Battery powered universal tools 475. Bus bar tool centre 479
Universal tools Hand-operated hydraulic universal tool, hydraulic universal head 472 Battery powered universal tools 47 Bus bar tool centre 479 471 Universal tools ONE TOOL FOR ALL SITUATIONS - UNIVERSAL
TRUMPF Power fasteners: Fasten. faster and cheaper. Fastening
TRUMPF Power fasteners: Fasten faster and cheaper. 58 Particular strengths: Whether in HVAC or in container and equipment construction, joining is probably the simplest and most cost-effective way to connect
HXE4B BATTERY POWERED CRIMP TOOL
Description The HXE4B Battery Powered Crimp Tool is a hand held, self contained crimp tool intended to crimp copper and aluminum cable with DMC Y dies. Safety Safety is essential in the use and maintenance
Professional. Nothing Less. Power Speed Safety Precision
Professional. Nothing Less. Professional. Nothing Less. Power Speed Safety Precision Greatness has arrived Quick Die Change System Easily swap out dies with no tools or loose parts Automatic Retraction
Accepts BEKU type dies Up to 150 mm 2 Cu lug. The EP-50H was designed to accept dies for BEKU type mechanical tool widely used in European countries.
EP-50H Accepts BEKU type dies Up to 150 mm 2 Cu lug Ram stroke : 15 mm Oil volume required : 18 cc Force at die face : 52 kn 250 (L) mm 1.6 kg Steel carrying case with die tray EP-50H Example of dies The
GATOR Battery-powered Pistol Grip Tools
SERVICE MANUAL (ECCXL shown) GATOR Battery-powered Pistol Grip Tools Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
Battery Operated Compression Tool
ECO-50 Battery Operated Compression Tool Ram stroke : 15 mm Applicable Hex Compression : Max. 150mm2 Cu Lugs 52 kn 397 (L) x 79 (H) x 70 (W) mm 2.3kg (less battery) 3.1kg (with battery) ECO-50 The ECO-50
GENERATION SAFETY PLUS. Battery-operated crimping, cutting and universal tools
GENERATION SAFETY PLUS Battery-operated crimping, cutting and universal tools Safety Plus a generation with a real added value The new standard Battery powered Crimping- and Cutting Tools from Klauke have
Hydraulic Knockout Sets
HKO-186 HKO-1810 Hydraulic Knockout Sets OPERATOR S MANUAL! Read this Operator s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in serious
2012 Shop Presses & Accessories BUYERS GUIDE
2012 Shop Presses & Accessories BUYERS GUIDE MADE IN THE USA TM Equipping technicians with heavy-duty products Contents Press Features 2 25 Ton Shop Presses 3 50 Ton Shop Presses 4 100 Ton Shop Presses
Electrical Applications. Metal Framing & Cable Tray Superstrut Metal Framing System. Column A. Design Data: Materials: Column B
Electrical Raceway Series 800 Surface Raceway and Lighting Systems Superstrut channel together with snap-in closure strip is listed by Underwriters Laboratories as a surface metal raceway. Other accessories
Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2
12A Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm 2 Maximum input pressure: 700 bar Oil volume required : 90 cc Output force : 226 kn 280 (L) mm 7.5 kg Steel carrying
RECHARGEABLE BATTERIES
AAA RECHARGEABLE BATTERIES AA D C RECHARGEABLE NICKEL METAL HYDRIDE Nickel Metal Hydride batteries have double the capacity of standard nickel cadmium cells and can be charged faster without the memory
HDE36B BATTERY POWERED CRIMP TOOL
Description The HDE36B Battery Powered Crimp Tool is a hand held, self contained crimp tool intended to crimp copper and aluminum cable with DMC HD36 dies. KEEP THIS MANUAL Important Safety Information
GATOR Battery-powered In-line X Tools
SERVICE MANUAL (EK2LX shown) GATOR Battery-powered In-line X Tools Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
EK12IDL Battery-powered, Dieless Crimping Tool
OPERATION MANUAL GATOR EK12IDL Battery-powered, Dieless Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
NORTH AMERICA ONLY PIERCE NUT UNIT REEL-FEED HEAD (SPRING OPERATED)
PIERCE NUT UNIT REEL-FEED HEAD (SPRING OPERATED) PAGE 3. FOR DRAWING TEMPLATE CONTACT STAMPING DESIGN ENGINEERING DEPT. (313)337-6514. EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER
Distributor Announcement
Date: 1/12/18 USA/INT L New Battery-Operated Tools Cutters, Crimpers and Impact Wrench Klein Tools brings over 160 years of quality, durability and expertise in hand tools to battery-operated tools. This
Testers, Tools, Safety Equipment & Lubricants
Drill Bits & Accessories Auger Bits D VersiBIT System Placement Tool Nail Eater II Wood Boring Bits - Shorty Bits Bit Dia (In) Shaft Dia (In) Shaft Length (In) 080354AGL 1/2" 3/16" 54" 120454AGL 3/4" 1/4"
Safety instructions. Always... Never... Fire hazard! Dear customer,
Dear customer, Safety instructions Danger can occur when working with this punch driver due to improper handling and/or poor maintenance, which may damage the device and cause severe physical injuries.
Units. Hand Held CORPORATION Self-Contained, Air/Oil, and Hydraulic units for clinching sheet metal.
733357F Hand Held Self-Contained, Air/Oil, and Hydraulic units for clinching sheet metal. Units An economical solution to Tog-L-Loc sheet metal assemblies Well-suited for low volume production and/or prototyping
ER V. CARB Phase I Enhanced Vapor Recovery AST Certified Products (VR-402-D) Single Wall Tank with Top Fill. 12 or 34. Pressure Vacuum Vent
CARB Phase I Enhanced Vapor Recovery AST Certified Products 5 (VR-402-D) Sensor Pressure Vacuum 10 Monitoring 1 12 or 34 Clock Gauge Direct Fill Spill Container 6 9 2 Overfill Gauge Stick Port Prevention
Flashlights, Batteries, Etc.
Item No. 1 - Battery, alkaline, AA, NEDA-15- A, 1 1/2 volts, 9/16" x 1 31/32". (CC NO. 1400040-1100972) EN91 0.23 Item No. 2 - Battery, alkaline, AAA, NEDA- 24-A, 1 1/2 volts, 13/32" x 1 3/4". (CC NO.
ME310B BATTERY POWERED CRIMP TOOL
Description The ME310B Battery Powered Crimp Tool is a hand held, self contained crimp tool intended to crimp machined contacts onto copper and aluminum cable. KEEP THIS MANUAL Important Safety Information
Professional. Nothing Less. Power Speed Safety Precision
Professional. Nothing Less. Professional. Nothing Less. Power Speed Safety Precision Greatness has arrived Quick Die Change System Easily swap out dies with no tools or loose parts Automatic Retraction
Machine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
GATOR Battery-powered Pistol Grip X Tools
SERVICE MANUAL (ECCXL shown) GATOR Battery-powered Pistol Grip X Tools Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
Care and Feeding of Rechargeable Batteries. Chris Capener March 1, 2012
Care and Feeding of Rechargeable Batteries Chris Capener March 1, 2012 Battery Types Lead Acid Nickel-Based NiCd NiMH LSD Li-ion Battery Charging Lead Acid Nickel-based Battery Packs Analyzers & Chargers
TECHNOLOGY SHOWCASE FASTER. EASIER. SAFER.
WWW.GREENLEE.COM TECHNOLOGY SHOWCASE FASTER. EASIER. SAFER. Simply the SMARTEST FASTEST MOST RELIABLE Knockout Driver EVER BUILT New Design Intelligence LS100XB 06481 Intelli-PUNCH 11-Ton Tool with Case
OPERATING and MAINTENANCE INSTRUCTIONS MAX PUNCH TM T HYDRAULIC PUNCH (MP360SDPRO)
OPERATING and MAINTENANCE INSTRUCTIONS MAX PUNCH TM 360 12T HYDRAULIC PUNCH (MP360SDPRO) 08/17 MP360SDPRO Manual READ AND UNDERSTAND ALL INSTRUCTIONS AND SAFETY INFORMATION IN THIS MANUAL BEFORE OPERATING
COMBINATION COVER & CARPET FLANGE
COMBINATION COVER & CARPET FLANGE Including Floor Box Products, Hubbell Incorporated is a registered ISO 9002 Company. Combination Cover & Carpet Flange Hubbell Floor Boxes SF3925 SF2925 SF2725 SF2525
/2017. Hollow piston cylinder, single-acting spring clamping hydraulic unclamping
, single-acting spring clamping hydraulic unclamping Applications: un-pressurized long-term clamping of dies or fixtures on press beds and rams when the space available is limited T-bolt Spring clamping
COMPLETE C ORDLESS SOLUTIONS FOR METALWORKING
COM PLET SOLU E CORDL E T META IONS FO SS R LWOR KING Lithium High Density MAKE YOUR FAB SHOP CORDLESS WITH METABO THE MOST POWERFUL BATTERY TECHNOLOGY WITH THE BROADEST RANGE OF SPECIALTY 2-in-1 Tapping
Hydraulic hand-punching tool HS-6. Art convincing solutions
Hydraulic punching tools INSTRUCTION MANUAL Hydraulic hand-punching tool HS-6 Art. 217602 convincing solutions Contents 1 Technical Data Page 2 2 Safety Instructions Page 2 3 Tool Operation Page 3 3 Tool
PUNCHING BENDING CUTTING
Quality Tools and Machines PUNCHING BENDING CUTTING revised Edition 21 Part A Naturally also on the Internet www.alfra.de Made in Germany Our product range APunching Bending Cutting BDrilling punching
Unsurpassed Product Quality & Customer Support
Unsurpassed Product Quality & Customer Support Model Selection Guide Simplified Touch Screen Control MANUAL SERVICES MAIN SCREEN AUTOMATIC PROGRAM Model TB140 TB130 TB100 030 Mega Bender TB76 TB60 Tube
DI-ACRO #2 HAND PUNCH PRESS INSTRUCTION MANUAL
DI-ACRO #2 HAND PUNCH PRESS INSTRUCTION MANUAL REV. E 6/12 1 TABLE OF CONTENTS A. SAFETY INFORMATION PG. 3 B. SET UP PROCEDURE & MOUNTING PUNCHES & DIES PG. 3-4 C. MAINTENANCE PG. 4 D. TECHNICAL DATA PG.
LITHIUM-ION BATTERY POWERED CRIMP TOOLS
LITHIUM-ION BATTERY POWERED CRIMP TOOLS COMPLETELY PORTABLE POWER CRIMPING INTRODUCTION TO SOLUTIONS TE Connectivity. A Leader in Crimp Quality. Anyone can make a tool to crimp terminals onto a wire. But
Your Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
GATOR Battery-powered In-line X Tools
SERVICE MANUAL (EK2LX shown) GATOR Battery-powered In-line X Tools Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
![For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]](/thumbs/89/97509625.jpg "For securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]")
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5] Includes
Pipe Flaring Tool Kit (for on-car use)
4850 Pipe Flaring Tool Kit (for on-car use) www.lasertools.co.uk Introduction Flaring Tool Kit Components 4850 Brake Pipe Flaring Tool Kit (for on-car use) 1: De-burr tool 2: Hydraulic ram 7 2 5 Designed
MIG/MAG welding torches
Simplify your life The 3 main considerations when choosing a MIG/MAG torch are: Reliability: WELDLINE WMT2 torches have been designed to meet the rigorous demands of today s welding environment, giving
Mulberry Metal Products Seattle Stock Sheet
Weatherproof Lampholders (catalog page B23) 30001 Die Cast Lampholders Residential Grade Aluminum 36 39 lbs. 30002 Die Cast Lampholders Residential Grade Natural 36 39 lbs. 30003 Deluxe Lampholder Gray
RS Series. For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items
www.rocheleautool.com RS Series Reciprocating Screw Blow Molding Machines For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items RS-70 with Tail Puller
PRODUCT CATALOG. 2010, Halex/Scott Fetzer Company TABLE OF CONTENTS. LIQUID Liquid-Tight Conduit Fittings
Electrical Metallic Tubing Fittings MC & C Cable & Flexible Metallic Conduit Fittings Non-Metallic Sheathed Cable Fittings Liquid-Tight Conduit Fittings Rigid & Intermediate Metallic Conduit Fittings Service
Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses
Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment ST 1092 ST 1292 page 7.03 ST 9041 page 7.04 ST 9062 page 7.05 ST 9067 page 7.05 ST 9072 page 7.06 ST 9075 page
J&JK SERIES SUBMINIATURE. DCONNECTOR EMI prevention shielding cover ( J cover) J COVER. Cover nut. Cover. Dimensions mm(in.) W.
ccessories DCONNECTOR EMI prevention shielding cover ( J cover) SUMINITURE J&JK SERIES J COVER J cover nut Features This shielding cover is made of mild steel, formed by our advanced stamping technology,
ALFRA Akku-Compact Flex Handstanze Art.-Nr / Prod.-No / N art / Nº de prod
Bedienungsanleitung / Operation Instructions / Manuel d'utilisation / Manual de instrucciones ALFRA Akku-Compact Flex Handstanze Art.-Nr. 02082 / Prod.-No. 02082 / N art. 02082 / Nº de prod. 02082 Elektrohydraulische
Installing Your 220v J-POD Kit
Installing Your 220v J-POD Kit NOTE: There are two J-POD versions depending on your pump voltage - 110 volt and 220 volt. MAKE SURE YOU HAVE THE RIGHT VOLTAGE J-POD FOR YOUR. Using software and hardware
Oiltight Switches & Pilot Devices
mm - Series Transfomer Contact Assemblies For use with Illuminated Pushbuttons. Style Contacts Part Number 12V AC with LED 24V AC with LED 48V AC with LED 12V AC with Incandescent 24V AC with Incandescent
/2017. Swing sink clamping element double-acting
Applications: integrated in press rams integrated in press beds in machine tools and equipment when the available space is limited when temperatures may reach 70 C For power units please see product group
SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250
SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250 ALUMINUM HEADS & CAPS LARGE PORTS PISTON PACKING PISTON WIPER BRONZE BEARING PACKING TUBE SEAL CYLINDER TUBE
F G. Punch Dimensions
SPH Series - Single Acting Punch Capacity... 35 tons Maximum Thickness....5 in. Maximum Pressure... 10,000 psi Industrial grade, single acting, spring return design. Punches holes in material up to.5 thick
1732-M2 Portable C-Frame Punch Driver
INSTRUCTION MANUAL GREENLEE 1732-M2 Portable C-Frame Punch Driver Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
DYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS
Cam Units DYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS CAM Units v9.indd 1 6/18/2015 4:59:50 PM Introduction Dyne-A-Cam Series IDEAL FOR PIERCING, FLANGING, CUTTING AND
MRK 25 M a r k 2 5 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T C H N C L T V L V M
MRK 25 SRS direct solenoid actuated valves MRK 25 MRK 25 M a r k 2 5 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T C H N C L T................................................... 3 V L V M O
AFE8B BATTERY POWERED CRIMP TOOL
Description The AFE8B Battery Powered Crimp Tool is a hand held, self contained crimp tool intended to crimp machined contacts onto copper and aluminum cable. KEEP THIS MANUAL Important Safety Information
BJansen Ultimate 2x72 Belt Grinder
BJansen Ultimate 2x72 Belt Grinder Metals Listing Note: Prices of metal fluctuate significantly. Onlinemetals.com is often the cheapest make sure and search for coupon codes You can buy from OnlineMetals
HDE36 BATTERY POWERED CRIMP TOOL
Description The HDE36 Battery Powered Crimp Tool is a hand held, self contained crimp tool intended to crimp copper and aluminum cable with DMC HD36 dies. Important Safety Information Safety Safety is
SUPER 30 AUTO EJECT -AE
INSTRUCTION MANUAL SUPER 30 AUTO EJECT -AE AUTOMATIC AIR-ELECTRIC SHORELINE DISCONNECT MODEL #: 091-169-30-120 30 Amps Max, 120 Volt Max, 175 PSI Max File: IM_091-169-30-120_reva.indd Rev: B Revised By:
Installation Instructions Skylight FlexShades by Draper
Caution 1 Read entire procedure before installing. Keep instructions for future reference. 2 Tools needed for installation: Cordless drill/screwdriver, with flathead, phillips, and 1 /4" nut driver attachments
VINE TRIMMERS PARTS MANUAL FOR P3000LZP CODE # SINGLE ROW. Marketed by: Benson Ave. Chino, CA Ph: 909/ Fax: 909/
VINE TRIMMERS PARTS MANUAL FOR P3000LZP CODE #0111 0450 SINGLE ROW Marketed by: 13477 Benson Ave. Chino, CA Ph: 909/548-4848 Fax: 909/548-4747 FORM: CollardVineTrimmerPartsP3000LZP June 2014 TABLE OF CONTENTS
PINS & BUSHINGS METRIC
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS METRIC www.danly.com PINS & BUSHINGS METRIC CONTENTS General Information 1 Plain & Ball Bearing Guide Posts Press Fit Guide Posts 2 Demountable
ALFRA PRESS - overview
70 ALFRA PRESS 71 ALFRA PRESS - overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 74 Page 78 Control cabinet housing, Control cabinet doors, Mounting panels Control cabinet housing, Control cabinet doors,
PINS & BUSHINGS METRIC
PINS & BUSHINGS METRIC PINS & BUSHINGS METRIC CONTENTS PAGE NUMBER General Information 1 Plain & Ball Bearing Guide Posts Press Fit Guide Posts 2 Demountable Guide Posts 4 Automotive Straight Guide Posts
Phone: Fax:
REC-Line 20 Fax: 800-345-3767 REC-558U ROBO*CRIMP TM 6 Ton Compression Tool with 1.8 Jaw Opening Accepts W, O and X Type Dies See Page 64 for Available Huskie Dies 6 Ton 8 lbs. with Battery 13 L x 12 H
ABOT4001 REV1 BATTERY POWERED CRIMP TOOL
Figure 1 Description The ABOT4001 rev1 is a handheld Battery Powered Crimp tool. It uses dies engineered to meet the requirements of the AS22520/40-01 and is intended to crimp insulated terminals, splices,
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE GENERAL INFORMATION CAM DIES
GENERAL INFORMATION 1. ANGLE OF CAM SLIDE AND DRIVERS ANGLE OF CAM SLIDE AND DRIVERS ARE TO BE DIMENSIONED ON THE DIE DESIGN. FOR DRIVER ANGLES SEE, PAGE 4-7. AVOID THE USE OF CAM ADAPTORS. IF THE CAM
CUTTERS REL-3000SA REL-2000SA & REL-58RH SINGLE ACTING HYDRAULIC CUTTING HEAD H/P SINGLE ACTING HYDRAULIC SINGLE ACTING HYDRAULIC CUTTING TOOL
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION Head opens for cable insertion along the line Head opens for cable insertion along the line CUTTERS REL-3000SA REL-2000SA ACSR REL-58RH REL-3000SA SINGLE
3L/T 2100F-F Series. Ball Valve, 3 Way Class 150 (150# FE) 150# Flanged Ends, Side Entry, 1/2" - 6" Stainless or Carbon Steel.
L/T-2100F-BF-CS Series L/T-2100F-BF-S6 Series Quick Spec Product Scope Size Range 1/2" - 6" 150# Flanged Ends Port Type Full Port Port Type L-Port or T-Port Port Orientation Side Entry Pressure Rating
Hydraulic Equipment. Check our website for the latest technical information.
Hydraulic Equipment www.anchorlamina.com Check our website for the latest technical information. Portable Hydraulic Die Setter & Drilling & Tapping Equipment Lamina Hydraulics has moved into the new millenium
*ININST.1002* 1690 Touchbar. Index:
*ININST.1002* ININST.1002 Concealed Vertical Rod Panic Device 1690 Touchbar Installation Instructions Index: : The door prep for the 1690 Hex Bottom Rod is different than for the RL bottom rod. Please
ULTRA IMT Fully Indexable Multi Tool 3-Station 8-Station
Expanding Machine Capabilities ULTRA IMT Fully Indexable Multi Tool 3-Station 8-Station U.S. PATENT 7,726,554 Other patents pending mate.com/imt Part Number 2010 Worldwide headquarters: 1295 Lund Boulevard,
Battery-powered Pistol Grip T/X Tools
SERVICE MANUAL (SRKF shown) Battery-powered Pistol Grip T/X Tools Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 0000 0 Sherman
Bridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since
Bridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since 1948. 49 Rev. 2010-04-14 Economically priced Robust design
98/99 Dogging options
98/99 Dogging options CDSI/HDSI dogging indicators Indicator provides an at-a-glance verification of the status of the door from inside of the room. Visible LOCKED and UNLOCKED indicators show whether
Cent-R-Rail Systems. WARNING: Do NOT use as a walkway, ladder or support for personnel. Cent-R-Rail. Cable Tray Systems
114 How The Service Advisor Works Cooper B-Line knows that your time is important! That s why the color-coding system in this catalog is designed to help you select products that fit your service needs.
Screw-hole punches. Cuts holes in thin materials quickly, easily, cleanly and without burrs in a few simple operations.
SCHRAUBLOCHSTANZEN SCREW-HOLE EMPORTE-PIÈCE TREKPONSEN HULSTANSERE PUNZONADORES PUNZONI SACA ŠROUBOVACÍ DZIURKOWNIKI ПРОБОЙНИКИ PERFORATOR VİDA-DELİK LUKNJAČI NOŽEVI CSAVAROS PRAKALAI BOCADOS ZA VARŽTŲ
Having the widest range of cable glands products to meet every kind of requirement for use in marine, Industrial and Non(Industrial)Areas.
Aftec is a leading manufacturer of cable glands,cable Connectors and associated accessories, used extensively for power control, lighting and instrumentation cable application in connection with IEC and
STAINLESS STEEL CONDUIT SYSTEM WITH NPT THREADS
STAINLESS STEEL CONDUIT SYSTEM WITH NPT THREADS SILICONE GASKETS (FDA APPROVED) SMOOTH - EASY TO CLEAN (316) STAINLESS STEEL LID STAINLESS STEEL (316) BODY PATENTED 1 Stainless Steel NPT Conduit System
INDEX A. CABLE CRIMPING.
INDEX A. CABLE CRIMPING 4 41 BATTERY CRIMPER 12 TONNE IZUMI 4 BATTERY CRIMPER 12T IN-LINE IZUMI 5 BATTERY MULTI TOOL 12 TONNE IZUMI 6 BATTERY CRIMPER 15 TONNE IZUMI 8 TOOL ACCESSORIES BATTERY IZUMI 10
TTT RESPECT SUPPORT INSPIRE MULTI TOOL SYSTEMS ULTRA, ULTRA UMT & ULTRA IMT FOR THICK TURRET
TTT RESPECT SUPPORT INSPIRE MULTI TOOL SYSTEMS ULTRA, ULTRA UMT & ULTRA IMT FOR THICK TURRET 2INTRODUCTION MATE PRECISION TOOLING FIVE DECADES OF GLOBAL EXCELLENCE Founded in 1962, Mate is a world-class