ANEMO SCREWS TITANIUM
|
|
- Randolph Phelps
- 5 years ago
- Views:
Transcription
1 BOLTS NUTS WASHERS STUDS SREWS ANEMO SCREWS TITANIUM MATERIALS : TITANIUM ALUMINIUM STAINLESS STEEL 1
2 INDEX STANDARD DIN The AES products can be order according to Din number or the affiliated ISO / UNI specifications. Be advised that there do exist small deviations between the measurements of DIN, ISO and UNI. DIN YEAR ISO UNI CODE (6107) SCHB SPHB W SLW WN (6113) FPSSS (6117) CPSSS Da 5909 à 5919 SB HSHB (912) 1983 (4762) (5931) HSCHB (912 Tx) 1983 (4762) (5931) HBSCHB (4026) 5923 FPHSS (4027) 5927 CPHSS HHB HHBFT 934 (970) N SCSHB SRCSHB (964) 1985 (2010) (6110) HSRCSHB CRCSHB TR PILN DCN (6921) 1983 (1665) HHBW (6923) NW (6926) 1983 (7043) PILNW (6927) 1983 (7044) MILNW SPHTS (7981) 1984 HSPHTS CRCSHTS CRPHB HSCSHB (7991 Tx) 1986 (14581) (5933) HBSCSHB (6593) PW (14579) HBSHB HSBHB SPECIAL N.D. (7380) HSPHB SPECIAL N.D. (7380 Tx) HBSPHB SPECIAL N.D. (7380 Tx) HBSBHB SPECIAL N.D. (7380) STHB SPECIAL N.D. (7380) HSTHB SPECIAL N.D. (7380 Tx) HBSTHB SPECIAL N.D. TPHB Titanium and its alloys have particular mechanical and physical properties. They are also highly resistant to corrosion, are very light and have a long life time. 2
3 PHYSICAL AND MECHANICAL CHARACTERISTICS OF TITANIUM AND ITS ALLOYS COMMERCIALY PURE TITANIUM ALPHA + BETA TITANIUM ALLOYS GRADE Grade 1 Grade 2 Grade 4 Grade 7 Grade 5 Grade 5 ELI Grade 9 Rm (MPA) Rp 0,2 (MPA) Elongation Resilience Density Kg/dm 3 4,51 4,51 4,51 4,51 4,40 4,40 4,48 Elastic Modulus (GPa) Shear Modulus (GPa) Weldability Excellent Excellent Excellent Excellent Good Good Excellent Forging temperature C Moulding temperature C Applications Chemical and nautical industries due to the high resistance against corrosion. Aeronautical components Aircraft engine components. Aeronautical structures. Medical and marine applications On Hydraulic pipes in aeronautics industries 3
4 COMMERCIAL TITANIUM ALLOYS PRIMARY MECHANICAL CHARACTERISTICS OF BOLTS MATERIAL CHEMICAL TENSILE DENSITY COMPOSITION STRENGTH YIELD POINT LENGHTENING KG/dm3 Min/Max Mpa 0,2% Mpa % min TITANIUM ASTM 348 Gr.2 4,5 34/ TITANIUM ASTM 348 Gr.5 4,5 895/ ALUMINIUM ASTM ,7 550/ MARAGING Ni-Mo-Cr-Co / / /10/11 AALOY Ni-Co-Cr-Mo TIGHTENING MOMENT «M» FOR TITANIUM GR5 AND Al 7075 SCREWS SCREW DIAMETER TITANE GR5 M (N/m) Al 7075 M (N/m) M3 1,73 0,75 M4 3,57 1,50 M5 6,90 3,00 M6 11,10 5,20 M8 28,30 12,30 M10 57,60 25,00 M12 97,50 42,40 M14 155,20 67,50 M16 235,70 102,50 4
5 APPLICATION SECTORS 5
6 Total length in mm PART NUMBER The part number is formed by combining the identifiers for Product group Material Diameter Pitch Length Color x Family Material Thread size Pitch Length Color SCHB HSHB HBSHB HSCHB HBSCHB HSPHB HBSPHB HSBHB HBSBHB SPHB CRPHB STHB HSTHB HBSTHB HHB HHBFT HHBW TPHB SCSHB HSCSHB HBSCSHB CRCSHB SRCSHB HSRCSHB FPHSS CPHSS FPSSS CPSSS SB TR DCN N NW PILN PILNW MILNW W PW SLW WN SPHTS HSPHTS CRCSHTS AL7 TI2 TI3 TI4 TI5 AL AHT BP NI Al7075 Titanium gr2 Titanium gr3 Titanium gr4 Titanium gr5 Aluminium HT Steel Stainless steel Nickle * Standard pitch Diam. Pas M3 050 M4 070 M5 080 M6 100 M7 100 M8 125 M M M M M M LEGEND : M3 M4 M5 M6 M7 M8 M10 M12 M14 M16 M18 M20 STANDARD* Completely compatible Partially compatible Similar design W R G BK BU Product code example : SCHB.TI3.M8X BK White Red Gold Black Blue 6
7 SLOTTED CHEESE HEAD BOLT B D 5,5 7 8, K 2 2,6 3,3 3, t 1,05 1,3 1,5 1,8 2,2 2,6 3,4 r min 0,1 0,2 0,2 0,25 0,4 0,4 0,6 n 0,8 1 1,2 1,6 2 2,5 3 l max SCHB + material + diam. x pitch +length + color SCHB.AL7.M6X R 7
8 HEXAGON SOCKET HEAD BOLT b d D 5,5 7 8, K s 2, t 1,3 2 2, r 0,1 0,2 0,2 0,25 0,4 0,4 0,6 0,6 0,6 l max HSHB + material+ diam. x pitch +length + color HSHB.AL7.M8X BK 8
9 HEXALOBULAR SOCKET HEAD BOLT b d D 5,5 7 8, K Imprint T10 T25 T25 T30 T40 T50 T55 T55 T60 t 1,3 2 2, , ,7 r 0,1 0,2 0,2 0,25 0,4 0,4 0,6 0,6 0,6 l max HBSHB + material+ diam. x pitch +length + color HBSHB.AL.M10X BU 9
10 HEXAGON SOCKET CONIC HEAD BOLT b d D 5,5 7 8, K s 2, t 1,3 2 2, r 0,1 0,2 0,2 0,25 0,4 0,4 0,6 n 1 1 1,3 1,3 1,8 2 2,2 l max HSCHB + material+ diam. x pitch +length + color HSCHB.TI3.M4X G 10
11 HEXALOBULAR SOCKET CONIC HEAD BOLT b d D 5,5 7 8, K Imprint T10 T25 T25 T30 T40 T50 T55 t 1,3 2 2, r 0,1 0,2 0,2 0,25 0,4 0,4 0,6 n 1 1 1,3 1,3 1,8 2 2,2 l max HBSCHB + material+ diam. x pitch +length + color HBSCHB.TI4.M5X BK 11
12 HEXAGON SOCKET PAN HEAD BOLT b d D 6, K 2,0 2,5 3 3,5 4 4,5 s 2 2, t 1,5 2 2,2 2,5 3 3,2 V 0,5 1 1,5 1,8 2 2,3 r 0,1 0,2 0,2 0,25 0,4 0,4 R l max HSPHB + material+ diam. x pitch +length + color HSPHB.TI5.M6X BU 12
13 HEXALOBULAR SOCKET PAN HEAD BOLT b d D 6, K 2,0 2,5 3 3,5 4 4,5 Imprint T10 T20 T20 T30 T40 T50 t 1,5 2 2,2 2,5 3 3,2 V 0,5 1 1,5 1,8 2 2,3 r 0,1 0,2 0,2 0,25 0,4 0,4 R l max HBSPHB + material+ diam. x pitch +length + color HBSPHB.AL.M8X W 13
14 HEXAGON SOCKET BUTTON HEAD BOLT b D 5,7 7,6 9,5 10, ,5 K 1,65 2,2 2,75 3,3 4,4 5,5 s 2 2, t 1,04 1,3 1,56 2,08 2,6 3,12 r 0,1 0,2 0,2 0,25 0,4 0,4 l max On Request HSBHB + material+ diam. x pitch +length + color HSBHB.AHT.M10X R 14
15 HEXALOBULAR SOCKET BUTTON HEAD BOLT b D 5,7 7,6 9,5 10, ,5 K 1,7 2,2 2,75 3,3 4,4 5,5 Imprint T10 T20 T20 T30 T40 T50 t 1,04 1,3 1,56 2,08 2,6 3,12 r 0,1 0,2 0,2 0,25 0,4 0,4 l max HBSBHB + material+ diam. x pitch +length + color HBSBHB.BP.M3X G 15
16 SLOTTED PAN HEAD BOLT b D 5,5 7 8, K 2,4 3,1 3,8 4,6 6 7,5 9 t 0,9 1,2 1,5 1,8 2,3 2,7 3,2 v 1,6 2 2,5 3 3,7 4,8 6 r 0,1 0,2 0,2 0,25 0,4 0,4 0,6 r1 4,5 5,5 7 8, n 0,8 1 1,2 1,6 2 2,5 3 l max On Request SPHB + material+ diam. x pitch +length + color SPHB.NI.M4X BK 16
17 CROSS RECESSED PAN HEAD BOLT D K 2,4 3,1 3,8 4,6 m 3,1 4,6 5,3 6,8 v 1,6 2 2,5 3 r 0,1 0,2 0,2 0,25 r l max Note : only available in titanium gr2 CRPHB + material+ diam. x pitch +length + color CRPHB.TI2.M5X BU 17
18 r SLOTTED TRUSS HEAD BOLT b d D K 2,5 3 3,5 4 4,5 n 1 1,2 1,6 2 2,5 t 1,7 2,0 2,2 2,5 2,7 v 0,8 1 1,3 1,5 1,8 r 0,2 0,2 0,25 0,4 0,4 R STHB + material+ diam. x pitch +length + color STHB.TI2.M6X W 18
19 HEXAGON SOCKET TRUSS HEAD BOLT b d D K 2,5 3 3,5 4 4,5 s 2, t 1,5 2,0 2,5 3 3,5 v 0,8 1 1,3 1,5 1,8 r 0,2 0,2 0,25 0,4 0,4 R HSTHB + material+ diam. x pitch +length + color HSTHB.TI3.M8X R 19
20 HEXALOBULAR SOCKET TRUSS HEAD BOLT b d D K 2,5 3 3,5 4 4,5 imprint T20 T20 T30 T40 T50 t 1,5 2,0 2,5 3 3,5 v 0,8 1 1,3 1,5 1,8 r 0,2 0,2 0,25 0,4 0,4 R HBSTHB + material+ diam. x pitch +length + color HBSTHB.TI4.M10X G 20
21 HEXAGON HEAD BOLT b d k 2 2,8 3,5 4 5,3 6,4 7,5 8, ,5 s 5, r 0,1 0,2 0,2 0,25 0,4 0,4 0,6 0,6 0,6 0,8 c 0,4 0,4 0,5 0,5 0,6 0,6 0,6 0,6 0,8 0,8 d2 4,6 5,9 6,9 8,9 11,6 15,6 17,4 20,5 22,5 28,2 l max HHB+ material+ diam. x pitch +length + color HHB.TI5.M20X BK 21
22 HEXAGON HEAD BOLT FULL THREAD K 2 2,8 3,5 4 5,3 6,4 7,5 8, ,5 s 5, r 0,1 0,2 0,2 0,25 0,4 0,4 0,6 0,6 0,6 0,8 c 0,4 0,4 0,5 0,5 0,6 0,6 0,6 0,6 0,8 0,8 d2 4,6 5,9 6,9 8,9 11,6 15,6 17,4 20,5 22,5 28,2 l max HHBFT+ material+ diam. x pitch +length + color HHBFT.AL.M16X BU 22
23 HEXAGON HEAD BOLT WASHERED b d D ,5 16,5 19 K 4 4,5 5 5, ,5 s 5, r 0,1 0,2 0,2 0,25 0,4 0,4 0,6 c 1 1 1,3 1,5 1,3 1,5 1,8 R 3, h 1,5 1,75 1,85 2 2,2 2,6 3,75 l max HHBW+ material+ diam. x pitch +length + color HHBW.AHT.M W 23
24 TWELVE POINTS HEAD BOLT b d D 10 10, K 5 5,5 6 7 s r 0,2 0,25 0,4 0,4 c 1,2 1,2 1,6 1,6 R 5 6 7,5 10 h 1,85 2,7 2,7 2,7 l max TPHB+ material+ diam. x pitch +length + color TPHB.BP.M5X R 24
25 SLOTTED COUNTERSUNK HEAD BOLT D Thread M3 M4 M5 M6 M8 M10 M12 M14 M16 M20 b d D 5,6 7,5 9, , K 1,65 2,2 2, t 0,85 1,1 1,3 1,6 2,1 2,6 3 r 0,3 0,4 0,5 0,6 0,8 1 1,2 n 0,8 1 1,2 1,6 2 2,5 3 R 3, h 1,5 1,75 1,85 2 2,2 2,6 3,75 l max SCSHB+ material+ diam. x pitch +length + color SCSHB.NI.M3X G 25
26 HEXAGON SOCKET COUNTERSUNK HEAD BOLT b d D K 1,7 2,3 2,8 3,3 4,4 5,5 6,5 s 2 2, t 1,2 1,8 2,3 2,5 3,5 4,4 4,6 r 0,1 0,2 0,2 0,3 0,5 0,5 1 l max HSCSHB+ material+ diam. x pitch +length + color HSCSHB.AL7.M4X BK 26
27 HEXALOBULAR SOCKET COUNTERSUNK HEAD BOLT b d D K 1,7 2,3 2,8 3,3 4,4 5,5 6,5 imprint T10 T20 T20 T30 T40 T50 T55 t 1,2 1,8 2,3 2,5 3,5 4,4 4,6 r 0,1 0,2 0,2 0,3 0,5 0,5 1 l HBSCSHB+ material+ diam. x pitch +length + color HBSCSHB.TI2.M5X BU 27
28 CROSS RECESSED COUNTERSUNK HEAD BOLT p 1 1,4 1,6 2 D 5,6 7,5 9,2 11 K 1,65 2,2 2,5 3 m 2,9 4,4 4,6 6,6 r 0,8 1 1,3 1,6 l max Note : only available in titanium gr2 CRCSHB+ material+ diam. x pitch +length + color CRCSHB.TI2.M6X W 28
29 SLOTTED RAISED COUNTERSUNK HEAD BOLT Dimension en mm b D 5,6 7,5 9, , K 1,65 2,2 2, ,6 t 1,2 1,6 2 2,4 3,2 4 3 r 0,3 0,4 0,5 0,6 0,8 1 1,2 r d n 0,8 1 1,2 1,6 2 2,5 3 l SRCSHB+ material+ diam. x pitch +length + color SRCSHB.TI4.M8X R 29
30 HEXAGON SOCKET RAISED COUNTERSUNK HEAD BOLT b d D K 1,7 2,3 2,8 3,3 4,4 5,5 6,6 s 2 2, t 1,2 1,8 2,3 2,5 3,5 4,4 4,6 r 0,1 0,2 0,2 0,3 0,5 0,5 1 r v 0,75 1 1,25 1,5 2 2,5 3 l max HSRCSHB+ material+ diam. x pitch +length + color HSRCSHB.TI5.M10X G 30
31 FLAT POINT HEXAGON SOCKET SETSCREW t 2 2,5 3 3, s 1,5 2 2, l max FPHSS+ material+ diam. x pitch +length + color FPHSS.TI5.M10X G 31
32 CONE POINT HEXAGON SOCKET SETSCREW t 2 2,5 3 3, s 1,5 2 2, l max d ,5 2 2,5 3 CPHSS+ material+ diam. x pitch +length + color CPHSS.AL.M12X BK 32
33 FLAT POINT SLOTTED SOCKET SETSCREW t 0,8 1,12 1,28 1,6 2 2,4 2,8 s 0,4 0,6 0,8 1 1,2 1,6 2 l max FPSSS+ material+ diam. x pitch +length + color FPSSS.AHT.M3X BU 33
34 CONE PIONT SLOTTED SOCKET SETSCREW t 0,8 1,12 1,28 1,6 2 2,4 2,8 n 0,4 0,6 0,8 1 1,2 1,6 2 l max d1 0,3 0,4 0,5 1,5 2 2,5 3 CPSSS+ material+ diam. x pitch +length + color CPSSS.BP.M4X W 34
35 STUD BOLT d l < b 125<l< l > e X=DIN Y=DIN W=DIN T=DIN Note: indicate the base by adding the corresponding letter SB+ material+ diam. x pitch +length + color+ base SB.NI.M5X R.X 35
36 THREADED ROD d Filetage M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 TR+ material+ diam. x pitch +length + color TR.AL7.M6X G 36
37 DOME CAPPED NUT d1 5 6,5 7,5 9,5 12, r 2,5 3,25 3,75 4,75 6,25 7,5 8,5 h 6, s 5, t m 2,4 3, , DCN+ material+ diam. x pitch + color DCN.AL7.M6X100.G 37
38 NUT m 2,4 3, , s 5, N+ material+ diam. x pitch + color N.TI2.M8X.BK 38
39 NUT WITH WASHER b 0,8 1 1,2 1,5 1,8 2, D k 2,5 3, , s 5, NW+ material+ diam. x pitch + color NW.TI3.M10X150.BU 39
40 PLASTIC INSERT LOCKING NUT d thread M3 M4 M5 M6 M8 M10 M12 M14 M16 M20 s 5, v 5,2 6,1 7,7 9,4 12,5 16,2 18,3 h PILN+ material+ diam. x pitch + color PILN.TI4.M12X175.W 40
41 PLASTIC INSERT LOCKING NUT WITH WASHER D R 1 1,1 1,5 1,8 2 2,6 3 s 5, h 3,5 5,3 6,8 7,8 10, ,8 PILNW + material+ diam. x pitch + color PILNW.TI5.M3X050.R 41
42 METAL INSERT LOCKING NUT WITH WASHER D R 1,5 1,8 2,1 3,2 s h 6,5 8 9,5 12 MILNW+ material+ diam. x pitch + color MILNW.AL.M4X070.G 42
43 WASHER d M3 M4 M5 M6 M8 M10 M12 M14 M16 M20 d d2 3,2 4,3 5,3 6,4 8,4 1, s 0,5 0,8 1 1,6 1,6 2 2,5 2,5 3 3 W+ material+ diam.+ color W.AHT.M5.BK 43
44 PLAIN WASHER d M3 M4 M5 M6 M8 M10 M12 M14 M16 M20 d1 3,2 4,3 5,3 6,4 8,4 10, d s 0,8 1 1,6 1,6 2 2, PW+ material+ diam.+ color PW.BP.M6.W 44
45 SPRING LOCK WASHER d M3 M4 M5 M6 M8 M10 M12 M14 M16 M20 d1 3,1 4,1 5,1 6,1 8,1 10,2 12,2 d2 6,2 7,6 9,2 11,8 14,8 18,1 21,1 b 1,3 1,5 1,8 2,5 3 3,5 4 h 2,1 2,5 3,2 4,2 5,4 5,9 6,8 s 0,8 0,9 1,2 1,6 2 2,2 2,5 SLW+ material+ diam.+ color SLW.NI.M8.R 45
46 WING NUT d Filetage M3 M4 M5 M6 M8 M10 M12 M14 M16 M20 d d ,5 16,5 19, e g max 2,3 2,8 3,3 4,4 5,4 6,4 7,5 8 h 10, ,5 37,5 46,5 m 4,6 6, WN+ material+ diam. x pitch + color WN.AL7.M10X150.G 46
47 SLOTTED PAN HEAD TAPPING SCREW d 3,5 3,9 4,2 4,8 5,5 6,3 D 6,9 7,5 8,2 9,5 10,8 12,5 p 1,3 1,4 1,4 1,6 1,8 1,8 n 1 1 1,2 1,2 1,6 1,6 t 1,25 1,4 1,5 1,7 1,95 2,2 k 2,1 2,25 2,45 2,8 3,2 3,65 r 0,5 0,5 0,6 0,7 0,8 0,9 l max SPHTS+ material+ diam.+length+color SPHTS.TI BK 47
48 HEXAGON SOCKET PAN HEAD TAPPING SCREW d 5 D 12 p 1,8 d1 5 t 2,4 k 3,5 s 5 R 8,5 r 0,8 l Note : only available in AL7075 HSPHTS+ material+ diam.+length+color HSPHTS.AL7.M5.45.BU 48
49 CROSS RECESSED COUNTERSUNK HEAD TAPPING SCREW d 3,5 3,9 4,2 4,8 5,5 6,3 D 6,8 7,5 8,1 9,5 10,8 12,4 p 1,3 1,4 1,4 1,6 1,8 1,8 m 4,2 4,6 4,7 5,1 6,8 7,1 y 3,2 3,5 3,7 4,3 5 6 k 2,1 2,3 2,5 3 3,4 3,8 r 1,4 1,5 1,6 1,9 2,1 2,4 l max CRCSHTS+ material+ diam.+length+color CRCSHTS.AL BU 49
Metrics
Metrics www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620) 442-7583
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More informationMaterial NBR NB black
page 1 / 5 Physical properties nominal range typical values Density ASTM D 1817, 23 C Hardness ASTM D 2240, Shore A, 23 C Tensile strength ASTM D 412, 23 C Elongation at Break ASTM D 412, 23 C ASTM D 395,
More informationTechnical Notes To DIN 933, ISO 4017.
Hexagon Head Bolts wit tread up to ead, DIN 933, 6101 d l A/F A0013.A6 6101 To DIN 933, ISO 4017. Order No. Tread l A/F Finis A0013.050-020-A6-00 M 5 20 3,5 8 unfinised A0013.050-025-A6-00 M 5 25 3,5 8
More informationArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR. Innovative high strength steels for economical steel structures
ArcelorMittal Europe - Long products Sections and Merchant Bars HISTAR Innovative high strength steels for economical steel structures Shanghai World Finance Center, P.R. China Innovative high strength
More informationStainless Spring Steel Strip
Stainless Spring Steel Strip Tolerances according to DIN EN ISO 9445-2:2010-06 Chart 1 (fine tolerance) or as agreed Grade No.* Grade Name Standard Tensile Strength (Rm) Comparable 1.4301 X 5 CrNi 18-10
More informationStandard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
More informationTri-Clamp ferrules & blanks
Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More informationTECHNYL A 218 BLACK 21N
TECHNYL A 218 BLACK 21N Description TECHNYL A 218 Black 21 N is an unreinforced polyamide 66, standard viscosity, heat stabilized for injection moulding.it is available in black color. Key Properties Chemical
More informationBORNEBUSCH. Non-ferrous metals. Stock list and material list for cast bronzes and other non-ferrous metals
Non-ferrous metals Stock list and material list for cast bronzes and other non-ferrous metals 30 Non-ferrous metals BORNEBUSCH Table of contents 1. Red bronze (CuSn7ZnPb) 32 1.1 Pipes 33 1.2 Round rods
More informationFor applications with high axial play. For applications with reduced mounting space
Fig. Example of use Use : Pitch circle diameter Suitable for encoders Page high axial play 8.000.4K00.0000 cylindrical pin Long spring element 0 mm A020, A02H 9080, 908 262 reduced mounting space 8.000.4J00.0000
More informationSUPREME. Catalogue 2016/18 NEW. Fasteners and Components EXPANDED MATERIAL RANGE BLACK MOULDED SHOULDER WASHERS
NEW BLACK MOULDED SHOULDER WASHERS SUPREME Fasteners and Components Australia s Leading Supplier of High Quality Plastic Fasteners and Components Catalogue 2016/18 EXPANDED MATERIAL RANGE Natural Nylon
More informationSOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI
Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm 5 1430 1250 6 1230 1250 1400 1430 8 910 940 960 985 1210 10 755 740 535 620 1100 12 755 670 540 655 840 1260 16 790
More informationMATERIAL DATA SHEET* ALPANA d.o.o.
MATERIAL DATA SHEET* ALPANA d.o.o. Contents H-Pur Material Data Sheet... 2 LT-Pur Material Data Sheet... 3 S-Pur Material Data Sheet... 4 XH-Pur Material Data Sheet... 5 XSH-Pur Material Data Sheet...
More informationReference: FT MET-en Date: 06/04/18 Revision: 4 Page: 1 of 12 T084 / DIN 84 T963 / DIN 963 T965 / DIN 965
Reference: FT MET-en Date: 06/04/18 Revision: 4 Page: 1 of 12 T084 / DIN 84 T963 / DIN 963 T965 / DIN 965 T985 / DIN 7985 D933 / DIN 933 D912 / DIN 912 D603 / DIN 603 D934 / DIN 934 D985 / DIN 985 D125
More informationSD SERIES MANUAL OVERRIDE GEARBOXES
MASTERGEAR WORLDWIDE SD SERIES MANUAL OVERRIDE GEARBOXES General description The cast iron construction and rugged design of the M-Series has been modified by new components to get an manual override gearbox.
More informationTUBE CLAMPS. Standard, Heavy & Twin
TUBE CLAMPS Standard, Heavy & Twin World Wide Metric distributes a complete line of tube clamps and mounting components according to the DIN standard. All clamps and components in the Standard Series,
More informationFull Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
More informationSTANDARD PRODUCTS FULL-CATALOGUE
STANDARD PRODUCTS FULLCATALOGUE Table of Contents Table of Contents STANDARD CONVERSION... 8 Standards conversion DIN ISO/EN... Standard types, relations... 2 Normative changes to screws... 3 Normative
More informationSR GreenPoxy 33 / SZ 8525 Clear epoxy system for compression moulding
Page 1 / 8 SR GreenPoxy 33 / SZ 8525 Clear epoxy system for compression moulding High bio-based carbon content SR GreenPoxy 33 resin is outcoming from the latest innovations in bio-based chemistry. SR
More informationComponents: Dimensions / Order Codes
Light Series LB Components: Dimensions / Order Codes Clamp Body Single Design ø D 2 B ø D 3 H S ø D 1 L2 L3 Order Codes Clamp Body Standard Materials Polypropylene Colour: Black Material code: PP Polyamide
More informationComponents: Dimensions / Order Codes. Clamp Body * *1*06*PP * * * * Clamp Body. ød2. Pipe / Tube / Hose Bore (1 Clamp Body)
ød Components: Dimensions / Order Codes Clamp Body ød B H L L L Clamp Body Colour: Green Material code: PP Colour: Black Material code: PA See page A88 for material properties and technical information.
More informationSELF-SEALING FASTENERS
CATALOG SF300 SELF-SEALING FASTENERS & SELF- SEALING WASHERS Recognized WHEN JUST FASTENING ISN T ENOUGH When just fastening isn t enough. Pre-assembled O-Ring Seals in Geometric Groove Visit our website
More informationHYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 12 / A / 551 / 0911 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT 12 / A / 551 / 0911 / E Speed-up and Splitter Gearboxes Contents General Information 4-5 Speed-up Gearboxes Series 60000-10 kw
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationLeading in Welded Bellows Technology. List of components
Leading in Welded Bellows Technology List of components Contents Welded Bellows Material 316L Material AM350 Noncircular membrane bellows (special shapes) Technical Manual Bellows movements (axial, lateral,
More informationCeiling diffuser 4DE
Ceiling diffuser 4DE Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Fax 0 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction... 3 Model...
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
More informationHi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
More informationSeamless Stainless Instrumentation Tubing
Seamless Stainless Instrumentation Tubing Headline About MST Our Profile Mannesmann Stainless Tubes has one of the largest product portfolios in this sector and 125 years of history that dates back to
More informationT.I. Midwood Co Ltd Green Lane Wardle Nantwich Cheshire CW5 6BJ T: +44 (0) F: +44 (0)
Features and Benefits Version 05/07/2014 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Used in non-cracked and cracked concrete Fast
More informationPRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH
PRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH INDEX 01. HOT ROLLED REINFORCING BARS PAGE 4 02. WIRE ROD PAGE 6 03. BILLET FROM CONTINUOUS CASTING PAGE 8
More informationTrutek TCM 385RE - Pure Epoxy 3:1
Features and Benefits Version 23/12/2013 High bond strength with High load resistance Used with all grades of threaded rod and rebar in accordance with TR029 Ideal for deep embedment installations Used
More informationP.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More informationSR InfuGreen 810 Green Epoxy systems for Injection and Infusion
Page 1 / 9 SR InfuGreen 810 Green Epoxy systems for Injection and Infusion The InfuGreen 810 is a two-component epoxy system. It has been specially formulated for resin transfer processes, such as injection
More informationS-BT screw-in stainless steel and carbon steel threaded studs
S-BT screw-in stainless steel and carbon steel threaded studs Product data Dimensions S-BT-MR M10/15 SN 6 S-BT-MR M10/15 SN 6 AL**) S-BT-MR W10/15 SN 6 S-BT-MR W10/15 SN 6 AL**) S-BT-MR M10/15 SN 5 S-BT-MR
More informationMaterial: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated
4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt
More informationNUTS, WASHERS, SCREWS & STUDS WDS SECTION 8 - NUTS, WASHERS, SCREWS & STUDS
SECTION 8 - NUTS, WASHERS, SCREWS & STUDS NUTS, WASHERS, SCREWS Hexagon (Standard) Nuts M4-M2 Collar Nuts Spherical Seating Nuts Acorn Nuts Coupling Nuts Quick Action Nuts Standard Washers Heavy Duty Jig
More informationComponents: Dimensions / Order Codes Clamp Body. * 1st part of STAUFF Group 4. * Exact outside diameters Ø D1 / Ø D2 (mm) Clamp Body.
Components: Dimensions / Order Codes Clamp Body Clamp Body Colour: Green Material code: PP 4 PP One clamp body is consisting of two clamp halves. 1st part of STAUFF 4 Exact outside diameters Ø D1 / Ø D2
More informationOPTIMIZATION & ANANLYSIS OF A HEAVY VEHICAL CHASSIS USING COMPOSITE MATERIALS
OPTIMIZATION & ANANLYSIS OF A HEAVY VEHICAL CHASSIS USING COMPOSITE MATERIALS U.NANDINI 1, C.PARIMALA 2, K.SAI KEERTHI 3 1,2,3 Assist. professor, department of mechanical engineering, Anantha Lakshmi Institute
More informationBALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 05-07-2016 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
More informationBENTELER Distribution. Pipe solutions to the petrochemical and power generation sectors
BENTELER Distribution Pipe solutions to the petrochemical and power generation sectors About us BENTELER Distribution is an internationally operating stockholding and processing company of steel tubes
More informationStrain relief devices
For optimum placement with dynamic use of cables Trademarks are legally protected for TSUBAKI KABELSCHLEPP GmbH as a national or international registration in the following countries: tsubaki-kabelschlepp.com/trademarks
More informationov-shoulder_screws_divider - Updated Shoulder Screws
ov-shoulder_screws_divider - Updated - 09-01-2017 Shoulder Screws Product Overview & Shoulder Bolts Steel shoulder screws These are our least expensive option. They are produced to ISO 7379 standards.
More informationEuropean Good Practices in. chains Lighter than light Potential of blends from natural fibres and recycled carbon fibres for lightweight applications
European Good Practices in Eco-creativity, creativity, natural fibres & short value chains Lighter than light Potential of blends from natural fibres and recycled carbon fibres for lightweight applications
More informationB Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationMATERIAL TEST REPORT/ Q.C. DOCUMENTATION MADE IN CANADA
PRODUCT DESCRIPTION: PUP JOINT 3" 1502 X 3FT NACE NK-030511 DATE: MAY 19 2011 C: 0.320 Mn: 0.540 Si: 0.270 Cr: 1.030 Ni: 0.100 Mo: 0.170 Cu: 0.190 P: 0.007 S: 0.002 Sn: V: Al: 0.029 Yield: 84,000 PSI HB
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More informationSwirl Diffuser DHV Contents Description...3 Models and dimensions...4 Technical data...8
Swirl diffuser DHV Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationEnergy Materials: Meeting the Challenge 9 th October 2008
Intelligent Energy Holdings Energy Materials: Meeting the Challenge 9 th October 2008 PEM Fuel Cells Paul Adcock Clean Fuel and Power 2008 Intelligent Energy Limited The information in this document is
More informationBore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationDELO-DUOPOX AB8390 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled
DELO-DUOPOX AB839 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled Base - epoxy resin - two-component, thixotropic Use - high-strength construction adhesive - multi-purpose
More information2600/2700 Series. Determining the stud length number when using receptacle: Type 1 + 3* G = P + F. * For Type 3: G = 9,9 mm min.
Particular Features Max. tensile strength 1.330 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle designs. 2600 Series: Fillister head; 2700 Series:
More informationFASTENERS BOLTS AND SCREWS NUTS MACHINE SCREWS WASHERS TAPPING AND WOOD SCREWS CHIPBOARD THREADED RODS AND PINS, RIVETS AND OTHERS ANCHORS
FASTENERS BOTS AND SCREWS NUTS MACHINE SCREWS WASHERS TAPPING AND WOOD SCREWS CHIPBOARD PINS, RIVETS AND THREADED RODS AND ANCHORS OTHERS C/ Nuva, 35 02002 Albact (Spain) tl:+(34) 967 221 602 fax:+(34)
More informationSTEEL TUBES, PIPES, COILS AND PLATES
STEEL TUBES, PIPES, COILS AND PLATES About Us Tiger Steel Industries LLC, was established in 1997 in Dubai, UAE, primarily to manufacture ERW Tubes and Pipes for the Steel and Construction industry. The
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More informationBASIC STANDARDS. Core holes for tapping screws and bolts with tapping screw thread DIN Simple, most common tapping thread-joints.
ISO DIN : 797 Core holes for tapping screws and bolts with tapping screw thread DIN 7970 Guidelines for application The essential characteristic of tapping screw thread is its capability of forming chipless
More informationQUICK OPERATING 1/4-TURN FASTENERS
50F Series. General Purpose Stud Assemblies and Receptacles Features: Designed for use in agricultural, industrial, and similar environments where a simplified rugged design is desired. Studs are retained
More informationPRODUCT NEW PRODUCT RANGE *PRICES OF ABOVE PRODUCTS ARE AVAILABLE ON REQUEST THE WORLD LEADER DURLOK BOLT DURLOK NUT UNBRAKO TENSION CONTROL BOLT
NEW PRODUCT RANGE PRODUCT DURLOK BOLT Property Class 2.9 Metric M To M20 Length 2mm To 00mm Size Range Inches - EQUIVALENT STANDARD AS PER UNBRAKO STANDARD DURLOK NUT 2 M To M20 - AS PER UNBRAKO STANDARD
More informationINDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
More informationHours / 100 Marks Seat No.
17610 16172 4 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)
More informationProduct Datasheet. Cable TV Junction Box (Page 4)
JUNCTION BOX Product Datasheet Junction Box Bolted Type (Page 2) Cable TV Box (Page ) Cable TV Junction Box (Page 4) Telephone Box (Page 5) Telephone Junction Box (Page 6) GRP Junction Box Enclosures are
More informationTorque overview for series 10 / 22 / 35 / 40 / 51
Content 1. General... 3 2. General screw torque for metric screws... 4 3. Mounting torque series 10 plug locking sleeve... 5 3.1. Mounting torque series 10 fastening / jam nut... 5 3.2. Mounting torques
More informationRECA VISO Assortments
Clear plastic lids: Easy viewing of product and stock. Ergonomically designed handle: comfortable to carry and use. Stackable without slipping: the base and the lids fit into one another. RECA VISO Cabinets
More informationBUFFALO - XP. A StongFast Product. For more information call Or log on to
Features and Benefits Version: 25/09/2017 Good bond strength with High load resistance Used with all grades of threaded rod Used in concrete and masonry Fast gelling and curing Used in dry and wet conditions
More informationTorque overview for series 10 / 22 / 35 / 40 / 51
Content 1. General 3 2. General screw torque for metric screws 4 3. series 10 plug locking sleeve 5 3.1 series 10 fastening / jam nut 5 3.2 s series 10 locking sleeve for GISMA endbells 6 3.3 s series
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationROLLER LUBRICANT VISCOSITY RATING
CHAIN INFORMATION OUTER PLATE OUTER PLATE PIN 2 PIECES OF EACH MAKE AN OUTER LINK BUSH INNER PLATE INNER PLATE 2 PIECES OF EACH MAKE AN INNER LINK ROLLER AMERICAN BRITISH Lubrication (Dependent on power
More informationVERONEX Cases MATERIAL PERFORMANCE CHARACTERISTICS. MECHANICAL PROPERTIES Units Test method Result. THERMAL PROPERTIES Units Test method Result
VERONEX Cases VERONEX is a breakthrough in plastic enclosure design, combining the versatility and functionality demanded by engineers, with the modern styling appreciated by their customers. The VERONEX
More informationEXAMPLES INTRODUCTION
AMEM 316 (AUTO308): Machine Elements I EXAMPLES INTRODUCTION EXAMPLES INTRODUCTION Example 1 (Hamrock p.53) As shown in figure 2.12(a), a 3m long bar is supported at the left end (B) by a 6 ram diameter
More informationUNIT-3 PART-A C.K.GOPALAKRISHNAN, AP/MECH, MAHALAKSHMI ENGINEERING COLLEGE, TRICHY
UNIT-3 PART-A 1. List the loads normally acting on a shaft? Bending load Torsional load or tw isting load. Axial thrust. 2. Write dow n the expression for the power transmitted by a shaft. P=2π NT/60 Where
More informationREMA TECHNICAL INFORMATION DIN 80, 160, 320. Page 1 of 13
DIN 80, 160, 320 C O N N E C T O R D A T A S H E E T Page 1 of 13 DIN 80, 160 and 320 Connector datasheet REMA is the leading supplier of DIN-style (DIN standard 43589) quick-disconnect power connectors.
More informationDynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements
8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.
More informationCeiling diffuser 4DF
Ceiling diffuser 4DF Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contens Description...3 Construction...
More informationINDEX C 1992 ALPINE ASSOCIATES INCORPORATED
INDEX PART NAME SECT. PAGE PART NAME SECT. PAGE ABRASIVE DISCS 15 4 ACORN NUT 2 14 ADAPTERS BATTERY 7 3 ADAPTERS BRASS 11 23 AIR BRAKE BRASS 11 2 AIR BRAKE TUBING 20 1 AIR COUPLERS 11 39 AIRCRAFT CLAMPS
More information1) Retractable nipple with centering 2) Retractable nipple with equalizer 3) Retractable nipple without centering
The critical contrasts between "stable clamping" and the required "flexibility for heat expansion" have been ideally solved with the Stark zero point mounting system. There are 3 different retraction nipples:
More information10. MOULD CLAMPING. 212 Moulding Supplies Edition 9 // POWER CLAMPS 10.2 STANDARD CLAMPS
10. MOULD CLAMPING 213 214 10.1 POWER CLAMPS 10.2 STANDARD CLAMPS 212 Moulding Supplies Edition 9 // www.mouldpro.com POWER CLAMPS POWER SLIDING CLAMP Part No. Thread Size h-min h-max s e1 d sw L e b c
More informationSwirl Diffuser Model DQF
Swirl Diffuser Model DQF Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationSection 7 Stainless Steel 316 Threaded Fittings
Section 7 Stainless Steel 316 Threaded Fittings Edition 3 121 [7] STINLESS STEEL 316 THREDED FITTINGS Specifications bout Stainless Steel - Stainless steel can be defined as a steel alloy that has a minimum
More informationStandard Machine Elements Worldwide
Standard Machine Elements Worldwide 2 GN 473 Foot clamp mountings Aluminium GN 480.1 Retaining rods Retaining tubings Stainless Steel Pictorial index GN 474 Two-way clamp mountings Aluminium page 5 GN
More informationPrecision machining brass rod
Precision machining brass rod The satisfaction of our customers requests is the guarantee of our high standards compliance and quality consistency Quality machined to Perfection Distinguishing parameters
More informationPolyfixer PSF. Features and Benefits Version: 14/04/2015
Features and Benefits Version: 14/04/2015 Good bond strength with High load resistance Used with all grades of threaded rod Used in concrete and masonry Fast gelling and curing Used in dry and wet conditions
More informationDelivery program for steel pipes
Delivery program for steel pipes Table of content Photo: Herrenknecht AG 1. Water-bearing steel tubes 4 EN 10255 EN 10224 2. Seamless steel tubes for pressure purposes 6 EN 10216-1 bzw. EN 10216-3 EN 10216-2
More informationTPV Variable Displacement Axial Piston Pumps CONTENTS. General Information. Installation Instructions. Technical Specifications 6-7
CONTENTS General Information Installation Instructions Technical Specifications Single Pump Installation Drawing Tandem Pump Installation Drawing Mounting Flanges and Shaft Details Rear Pump Mounting Flanges
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationTorque hinges. Art.:
hinges hinges Art.:6871 Art.:6875 Art.:6871.04 Art.:6871.05 Art.:6876 Art.: 150.SK-T-ZA Art.: 150.SK-T-ZA Art.: 150.HG-TA Art.: 150.HG-IT MC Art.:150.SF-TH Art.:150.HG-TS Art.:150.HG-ITS Art.:150.HG-ITM
More informationW Straight to success
Precision brass rod W5000 - Straight to success Production from one batch We have installed a state of the art brass rod manufacturing plant for high-precision machining. All operations starting with the
More informationWolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy
Wolf Kunststoff ZEDEX ZX-530 A5D Polymer Alloy Category : Polymer, Thermoplastic Material Notes: Main Characteristics: Low Creep; Low moisture absorption; Flame retardant; Low impurity ions; Good machinability;
More informationSpecial sockets for MXTA Series of Driving Type Hydraulic Torque Wrench(CR-MO sockets) MXTA Series of Driving Type Hydraulic Torque Wrench.
Torque Wrench Torque Wrench MXTA Series of Driving Type Hydraulic Torque Wrench Special sockets for MXTA Series of Driving Type Hydraulic Torque Wrench(CR-MO sockets) Max. working pressure up to 70Mpa,
More informationEuropean Aviation Safety Agency
European Aviation Safety Agency EASA TYPE-CERTIFICATE DATA SHEET Number : P.001 Issue : 02 Date : 15 May 2007 Type : MT-Propeller Entwicklung GmbH Variants List of effective Pages: Page 1 2 3 4 5 6 7 8
More informationDimensions / Order Codes
U-Bolt Clamps Dimensions / Flat Steel U-Bolt with Plastic Pipe Saddle (Short) and U-Profile Type FB+RUK (To be used as Fixed Point Clamps only) B1 ø D1 H4 H2 H3 H1 L2 L1 B2 Flat Steel U-Bolt (type FB)
More informationGRP backing flanges DIN 2501 Flange connecting dimension PN10 WORK STANDARD. GRP backing flanges made of Polyester resin.
GRP backing flanges DIN 2501 Flange connecting dimension PN10 1310-WN-en 06 10.2002 GRP backing flanges made of Polyester resin. D 45 e d2 d1 b1 k Flange connecting dimensions according to DIN 2501 Part
More informationQuick-change systems Content
Quick-change systems Content Quick-change systems at a glance... 12 Series S... 13 Series SR... 18 Series ASR... 39 Quick-change systems At a glance Quick-change systems > Safe and stable connection of
More informationCompany name: Created by: Phone: Note! Product picture may differ from actual product
Date: 13/03/2017 Tender Text Note! Product picture may differ from actual product Product No.: 98993055 MTH4-5/5 A-W-A-AQQV Multistage, immersible, self-priming, centrifugal pump for vertical installation
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More informationPRESSURE BALANCED TYPE LUBRICATED PLUG VALVES General Index
General Index Range and Index...1 Figure Numbering...2 Materials...3-4 Pressure Testing...5 Installation, Marking and Identification...6-7 Desgin Features...8-9 Stress Analysis to the body...10 Components
More information