Am Rotböll Weiterstadt Telefax /

Transcription

1 AC-Motors IGK/IGKU - 370W housed ac-motors, convectional-cooled technical feature large adjustment range with inverter Drives because of the fanless design (typ. approx. 3-70Hz possible) UL-certification with the IGKU motors compact, plain single- and three-phase motors higher power density from a smaller construction volume minimal losses lead to optimum efficiency energy saving compared with standard motors smooth and easy-to-clean design suitable for critical application of protection IP 54 or IP 5 / thermal class F compatible with all Groschopp gearboxes and basically for all other gearboxes from other manufacturers standard on three phases with operating capacitors on 1x230V, and to use with a 1x230V-inverter drives. 3x400V inverter drive with optional phase phase insulation Certification and Labels: options: e.g. brakes, thermal sensor, encoder systems 2- and 4-pole drives The IGKU series are convincing due to their new efficient design. Evidence are the higher power density and the improve heat dissipation in comparison with their ancestors. This allows a reduction in size with no loss in power. Seite 1 von 7

2 available s with performance data speed rel. start rel. breakdown efficiency W Mstart/M Mtilt/M Typ rated power rated current input power [IGK/-U] P2 n M Iy P1 W min-1 Ncm A power factor capacitor % cos( φ) μf 4 η C 2-poles (approx r.p.m.) preferred s ,3 0, 87, 2, 2, 52,2 0, ,4 0,28 15,0 0, ,4 0, ,80 2,70 70,0 0, , ,00 7,0 0,87 25 additional s ,44 0,08 3, 1,75 1,85 4,0 0, ,0 0, ,30 2,20 58,3 0, , 0, 80 50,1 0, ,70 0, ,20 2,80 74,0 0, ,33 1 2,40 72,0 0, , 0, ,0 2,0 7,1 0, ,7 0,3 3 3,70 3,40 75,4 0, ,0 0, ,40 72, 0, ,2 34 2,5 3,00 7, 0,85 4-poles (ca. 00 r.p.m.) preferred s , 0, 55,0 1,5 1,7 32,8 0, , 0,2 5 1,8 1,5 52,8 0, ,7 0, ,37 2,28 57,7 0, , ,31 2,3 71,7 0,7 additional s ,77 0,08 3,8 1,75 1,7 23,0 0,70 2, ,7 0,17 71,0 2,08 2,05 3,4 0,3 3, ,1 0,,0 1,0 1,75 40, 0, ,2 0, ,70 2,4 0,5 0, ,7 0, ,03 2,24 54, 0, , 0, ,35 2,28 2,8 0, , ,7 0,8 83 0,37 7 1,8 2,00 4,2 0, , , 8, 0,75 Seite 2 von 7

3 technical information motor technologie 2- or 4-pole AC-induction motors Standard on three phases or with operating capacitors on 1x230V, and to use with a 1x230V-inverter drives. 3x400V inverter drive with optional phase Phase insulation. connection star/delta: 400/230V power output range bis 370W insulation class F (max. winding temperature 155 C) housing aluminum continuous casting, bearing shield aluminum pressure casting B3/B or with screw foot protection [1] IP54 of cooling convectional (fanless cooling over the surface, standard for continuous operation, ED=100%) connection System terminal box (terminal board with bolts) painting RAL 5002, ultramarine blue, semi-gloss terminal box K3, plastic, with cable gland, 2x PG11 AK2, aluminum, with cable gland, 2x M20 [1] Information about the protection of motors relate to the assembled state with gearboxes. The of protection is for the electronic equipment. Protection s of gearboxes are to be requested separately. Options electrical special voltage and speed increased for a short period of time strengthened phase insulation for operating on a 3x400 drive inverter mounted inverter MFR mechanical special design for your requirements are possible brakes 24VDC or 205VDC (from terminal box with integrated commutator) encoder System encoder, resolver, speed generator temperature monitoring heat monitor with NC-contact or triple-ptc protection [1] up to IP5 possible (due to permanently elastic or O-ring at the bearing shield) painting special painting coating surface coating, e.g. Hard-Coat, SilaCoat, DurniCoat certifications UL, UR oder CSA terminal box K3E plastic, EMC conform with screw connection 2x PG11 (dimension drawing of the terminal boxes are given later in this data sheet) [1] Information about the protection of motors relate to the assembled state with gearboxes. The of protection is for the electronic equipment. Protection s of gearboxes are to be requested separately. Seite 3 von 7

4 technical drawing and dimension (Our preferred s are basically mechanically prepared for attaching to our gearboxes. Therefore the shaft- and flangedimensions differ from the drawings above. For requests without gearboxes we do ask for a separate consultation.) [IGK] [IGKU] a b B3 B , , ,5 100,5 11, , , , , , , , ,5 171 B3 c d B e B3 f g h i k l m n o q r s t u v w x y z B kg 1,3, , M , M5 2,5 27 2, , ,5 4, ,5 3 44,5,5 2,3 2, , , , M 1 3, ,5,5 28 3,4 3, ,5 4,3 5, ,7 4, ,8 38, ,5 28, Mass 4, , ,5 5,3,3 Seite 4 von 7

5 available flanges and shafts flange- and shaft-dimensions for attaching to gearboxes: VE31, Z3, Z5, Z10, Z, Z20 d [mm] IGK/IGKU /0 100 Seite 5 von 7

6 optional brakes technical information (with spring-loaded brake) braking voltage current [IGK/-U] [Nm] [VDC] [A] dimension for a* for ab mass [mm] [kg] B3 [mm] B [mm] 2 1,5 11, ,5 3, ,5 3, ,5 3, 11,5 4, 2 211,5 5,4 17,5 17 1,5 1 21,5 21,5,5 3 tbd 203,5 203 tbd 223,5 223 tbd ,0 0,0 5,0 0, ,0 0, ,0 0,11 2, ,5 4,7 5, *data for 24 V DC, brakes only on request. Attention: motor with braking option only comes with terminal box AK2. Seite von 7

7 available terminal boxes K3/-E AK2 connections design 3 phases 11 phase standard motor (Steinmetz-Schaltung) star with brakes and commutator triangle star triangle Seite 7 von 7