Standard cast iron Motor
|
|
|
- Erik Phillips
- 5 years ago
- Views:
Transcription
1 Standard cast iron Motor Frame size 80 to 355 Série 1L Phase 3 Voltage 265/460V 60Hz
2 Types of mounting B3 V9 B5 B14 B6 B9 B3 / B5 V5 B3 / B14 B15 V1 B7 V18 V1 / V5 V8 V18 / V5 V6 B8 V3 / V6 V3 V19 V19 / V6
3 General characteristics Introduction Our motors are designed and manufactured to meet the hardest service conditions, offering maximum safety in all environments including outdoors. Construction characteristics - Frames: The housing material is cast iron from 80 up to 355 frame. - End shields: They are all made in cast iron. - Terminal box: From 80 frame up to 355 frame the housing material is cast iron. It can be rotated by Fans: They are made out of polypropylene up to 280 frame, in aluminium for 315 and 355 frames. - Fan covers: Material for all frame sizes is pressed steel. Standard specifications All our motors are designed in IP 55 degree of protection, totally enclosed fan cooled and available with these mountings: B3 (IM 1001), B5 (IM 3001), B3/B5 (IM 2001) and V1 (IM 3031). Frames 315 and 355 can only be mounted B3and B5. Standard voltage is 400V, frequency 50Hz. Voltage tolerance is ± 10%. Voltages applied beyond this tolerance may cause damage to the winding. These motors can operate in high ambient temperatures of 40 C and altitudes up to 1000 metres. Standard motors have class F insulation, class B temperature rise limit. From 160 frame upwards windings have thermistors fitted in the terminal box through separate terminals. Vibration level is very low; most motors have vibration levels of less than 1 mm/sec. Bearings All motors have SKF or NSK bearings.. Up to 132 frame bearings are ZZ, from 160 frame upwards bearings have C3 clearances and lubrification is performed through grease relief.
4 2 Poles 3000 rpm Type Output r.p.m. Full load current la/in Efficiency Power factor Mn Ma/Mn Mk/Mn Weight Power η % cos γ 380V 400V 415V 100% 100% kw A A A Nm Kg. 1L L L90S L90L L100L L112M L112M L132S L132S L132M L160M L160M L160L L180M L200L L200L L225M L250M L250M L280S L280M L280M L315S L315M L315L L315L L355M L355L Poles 1500 rpm Type Output r.p.m. Full load current la/in Efficiency Power factor Mn Ma/Mn Mk/Mn Weight Power η % cos γ 380V 400V 415V 100% 100% kw A A A Nm Kg. 1L80M L80M L90S L90L L100L L100L L112M L132S L132M L132M L160M L160L L180M L180L L200L L225S L225M L250M L250M L280S L280M L280M L315S L315M L315L L315L L355M L355L
5 6 Poles 1000 rpm Type Output r.p.m. Full load current la/in Efficiency Power factor Mn Ma/Mn Mk/Mn Weight Power η % cos γ 380V 400V 415V 100% 100% kw A A A Nm Kg. 1L80M L80M L90S L90L L100L L112M L132S L132M L132M L160M L160L L180L L200L L200L L225M L250M L280S L1280M L280M L315S L315M L315L L315L L355M L355M L355L Poles 750 rpm Type Output r.p.m. Full load current la/in Efficiency Power factor Mn Ma/Mn Mk/Mn Weight Power η % cos γ 380V 400V 415V 100% 100% kw A A A Nm Kg. 1L80M L80M L90S L90L L100L L100L L112M L112M L132S L132M L132M L160M L160M L160L L180L L200L L225S L225M L250M L280S L280M L280M L315S L315M L315L L315L L355M L355M L355L On request (Not standardized output IEC power rating)
6 Mounting B3 1L L L
7 Frame A AA AB AC AD B BB C D DH E ED F G H HA HD HE K KK L LD 1L M6x M25x L90S M8x M25x L90L M8x M25x L M10x M32x L M10x M32x L132S M12x M32x L132M M12x M32x L160M M16x M40x L160L M16x M40x L180M M16x M40x L180L M16x M40x L M20x M50x L225S (4-8P) M20x M50x L225M (2P) M20x M50x L225M (4-8P) M20x M50x L250M (2P) M20x M63x L250M (4-8P) M20x M63x L280S (2P) M20x M63x L280S (4-8P) M20x M63x L280M (2P) M20x M63x L280M (4-8P) M20x M63x L315S (2P) M20x M63x L315M (2P) M20x M63x L315L (2P) M20x M63x L315S (4-8P) M20x M63x L315M (4-8P) M20x M63x L315L (4-8P) M20x M63x L315L (4-8P) M20x M63x L355M (2P) M24x M63x L355L (2P) M24x M63x L355M (4-8P) M24x M63x L355L (4-8P) M24x M63x
8 Mounting B5 et V1 1L L L
9 Frame AC AD D DH E ED F G HE KK L LA LD M N P S T 1L M6x M25x L90S M8x M25x L90L M8x M25x L M10x M32x L M10x M32x L132S M12x M32x L132M M12x M32x L160M M16x M40x L160L M16x M40x L180M M16x M40x L180L M16x M40x L M20x M50x L225S (4-8P) M20x M50x L225M (2P) M20x M50x L225M (4-8P) M20x M50x L250M (2P) M20x M63x L250M (4-8P) M20x M63x L280S (2P) M20x M36x L280S (4-8P) M20x M63x L280M (2P) M20x M63x L280M (4-8P) M20x M63x L315S (2P) M20x M63x L315M (2P) M20x M63x L315L (2P) M20x M63x L315L (2P) M20x M63x L315S (4-8P) M20x M63x L315M (4-8P) M20x M63x L315L (4-8P) M20x M63x L355M (2P) M24x M63x L355L (2P) M24x M63x L355M (4-8P) M24x M63x L355L (4-8P) M24x M63x Terminal box 1L L L Frame A B C Metric Gland Sizes PG Gland Sizes 1L M5x16 M6x16 N/A N/A M6x10 N/A N/A M4 M6x25 2xM25 2xPG16 1L M5x16 M6x16 N/A N/A M6x10 N/A N/A M5 M6x25 2xM32 2xPG21 1L M6x16 M6x20 M8x16 M8x16 M8x16 M4x25 M3 M8 M8x30 2xM40 2xPG29 1L M6x25 M8x30 M8x16 M8x16 M8x16 M4x25 M3 M10 M8x30 2xM50 2xPG36 1L M6x25 M8x30 M10x20 M10x20 M10x20 M4x25 M3 M10 M10x30 2xM63 2xPG42 1L M8x30 M8x30 M10x16 M10x16 M10x16 M4x25 M3 M12 M10x50 2xM63 2xPG48 1L M8x30 M8x30 M10x25 M10x25 M10x25 M4x25 M3 M16 M12x80 2xM63 2xPG48
10 Bearing information Frame DE NDE d D B 1L ZZ C ZZ C L ZZ C ZZ C L ZZ C ZZ C L ZZ C ZZ C L ZZ C ZZ C L C C L C C L C C L C C L C C L280 2P 6314 C C L P 6316 C C L315 2P (Horizontal) 6316 C C L315 2P (Vertical) 6316 C L P (Horizontal) NU319 C C L P (Vertical) NU319C L355 2P (Horizontal) 6319 C C L355 2P (Vertical) 6319 C L P (Horizontal) NU C L P (Vertical) NU322 C Oil seal information DE NDE Frame d D B d D B 1L L L L L L L L L L L280 2P L P L315 2P L P L355 2P L P
11 Specification arrangement and parts list 1L Endshield D. E. with oil seal 2 Wave Washer 3 Bearing D. E. 4 External Earth Stud 5 Terminal Box. 6 Terminal Box cover 7 Stator lamination pack 8 Rotor lamination pack 9 Stator Frame 10 Endshield N. D. E. with oil seal 11 Bearing N. D. E. 12 Fan 13 Fan cover arrangement and parts list 1L Outer Bearing Cap D. E. with oil seal 2 Wave Washer 3 Bearing D. E. 4 Inner Bearing Cap D. E. 5 Endshield D. E. 6 Terminal Box cover 7 Terminal Box 8 External Earth Stud 9 Rotor lamination pack 10 Stator lamination pack 11 Nameplate 12 Stator Frame. 13 Inner Bearing Cap N. D. E. 14 Endshield N. D. E. 15 Fan 16 Fan cover 17 Bearing N. D. E. 18 Outer Bearing Cap N. D. E. with oil seal arrangement and parts list 1L Flinger D. E. 2 Outer Bearing Cap D. E. with oil seal. 3 Bearing D. E. 4 Inner Bearing Cap D. E. 5 Endshield D. E. 6 Terminal Box. 7 Terminal Box cover 8 Terminal Box Adapter 9 Gland Plate. 10 External Earth Stud 11 Stator lamination pack 12 Rotor lamination pack 13 Stator Frame 14 Inner Bearing Cap N. D. E. 15 Endshield N. D. E. 16 Fan 17 Fan cover 18 Bearing N. D. E. 19 Outer Bearing Cap N. D. E.with oil seal. 20 Flinger N. D. E.
AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1
AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1 STANDARD AND SPECIFICATION Performance: Meet the requirement of Singapore standard
: B3; B5; B14; B34; B35; V1
ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia
Low Voltage 3-Phase Induction Motors. Range 0.18kW to 670kW
Low Voltage 3-Phase Induction Motors Range 0.18kW to 670kW Totally Enclosed Fan-Cooled Cast Iron Series Contents page page PRODUCT DETAILS General Information 2 Electrical Design and Standards Altitude
ELECTRIC MOTORS. Selection. Starting torque and nominal torque
SELECTION PROCEDURE The output powers published overleaf are based upon continuous maximum rating conditions. Therefore design factors for above average running periods do not normally affect the selection.these
Energy Saving Three Phase Motors
e-drive Energy Saving Three Phase Motors IEC frames 56 to 400 Outputs 0.09 to 630 IE2 MEPS2006 Type: AHE Aluminium Motors Type: HE Cast-Iron Motors 1 When you need all the features of a premium quality
Explosion and flame-proof single phase electric motors
Explosion and flame-proof single phase electric motors EEx-d, EEx-de, IIB, IIC II, 2G IP55 II, 2G&D IP66 T4, T5, T6 Frame size 56 to 112 Single phase Voltage 230 50Hz Voltage 265 60Hz Types of mounting
SWE SERIES (IE3) WONDER ELECTRIC MOTOR (S) PTE LTD. Energy Saving Low Noise Environmental Friendly IEC Dimension Low Vibration European Design
RANGE OF PRODUCTS Three phase asynchronous squirrel-cage & slip ring induction motors Three phase asynchronous self-braking motors Hollow shaft rotor motors Cooling tower motors High motors, (IE2) (IE3)
Explosion and flame-proof cast iron electric motors
Explosion and flame-proof cast iron electric motors EEx-d, EEx-de, IIB, IIC II, 2G IP55 II, 2G&D IP66 T4, T5, T6 Frame size 56 to 160 3 phases Voltage 230/400 V 50Hz Voltage 265/460V 60Hz Types of mounting
HAIE2 -Efficiency and reliability for industry
HAIE2 -Efficiency and reliability for industry High performance with energy efficiency, this is the meaning of the new CAG electric motor. Low cost and best quality and long lifetime have been the basis
Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors
Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors Series R2, Frame 63 355 Introduction KHM R2 series cast iron motors are totally enclosed fan cooled, 3 phase, and squirrel cage induction
Metric Efficient Line Cast-iron IEC Motors
Metric Efficient Line Cast-iron IEC Motors SPECIFICATION FOR METRIC EFFICIENT LINE CAST-IRON (MELC) IEC MOTORS IN CHILE-ARGENTINA-BOLIVIA Three Phase, IP55 Cast-iron IE2 Metric Motors @ 40 C Ambient Motor
Low Voltage 3-Phase Induction Motors. Range 0.55kW to 500kW TOTALLY ENCLOSED FAN-COOLED CAST IRON FRAME SERIES AUSTRALIA & NEW ZEALAND
Low Voltage 3-Phase Induction Motors Range 0.55kW to 500kW TOTALLY ENCLOSED FAN-COOLED CAST IRON SERIES General Information MONARCH GX - Three Phase Induction Motors are a range of high quality, Totally
CEB 71204/a of 13 december 2005 SLSHR. 3-Phase Totally Enclosed Induction Motor Steel Housing Water-Cooled 30 to 1800 kw
CEB 71204/a of 13 december 2005 SLSHR 3-Phase Totally Enclosed Induction Motor Steel Housing Water-Cooled 30 to 1800 kw C.E.B. SLSHR RANGE TECHNICAL CATALOGUE 05/12/13 CONTENTS CONTENTS 2 APPLICATIONS
KAT.NMST ENG NORM ELECTRIC MOTORS THREE PHASES SQUIRREL CAGE TEFC NMST
KAT.NMST.02.14.ENG NORM ELECTRIC MOTORS THREE PHASES SQUIRREL CAGE TEFC NMST 90 355 IMPORTANT NOTE: Due to the continious development policy, our companyreserves the right to make changes the values, dimensions
Low Voltage 3-Phase Induction Motors. Range 0.18kW to 670kW
Low Voltage 3-Phase Induction Motors Range 0.18kW to 670kW Totally Enclosed Fan-Cooled Cast Iron Frame Series Contents page page PRODUCT DETAILS General Information 2 Electrical Design and Standards Altitude
champion series motors
Introducing A brand new series of Super Performers Data Sheet champion series motors FRAME SIZE 63-132M TEFC 3 Phase Squirrel Cage Induction Motors Siemens CHAMPION Series Cage Motors are suitable for
1LG0 Low-voltage Motors
Low-voltage motors up to 315kW Catalog D81.5.1 1LG Low-voltage Motors Answers for industry. 1 Table of Contents Overview 3 Motor standards 5 Mechanical design 6 Electrical design 1 Converter fed application
CE Marking. Number of poles. Core Length. Frame size
269 Electric Motors General Information CHALLENGE series three phase asynchronous AC electric motors, Are totally enclosed fan cooled (IC-411) squirrel caged type, With IP55 enclosure protection, Class
Aluminium Frame Motors Improved Efficiency EFF2
Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
AC motors IE1/IE2/IE3
1303 AC motors IE1/IE2/IE3 www.brd-klee.com Danish Design 2 Content Page Table of content 3 MS and MS2 2-pole 4 MS and MS2 4-pole 5 MS and MS2 6-pole 6 MS and MS2 8-pole 6 Basic dimensions MS/MS2 7-9 Spare
COMBROIND001_= THREE PHASE SQUIRREL CAGE INDUCTION MOTORS. IE1 motors MAA - BAA Series IE2 motors MAQ - BAQ Series
COMBROIND001_= THREE PHASE SQUIRREL CAGE INDUCTION MOTORS IE1 motors MAA - BAA Series IE2 motors MAQ - BAQ Series 03 07 07 08 12 15 15 16 18 20 SPECIFICATIONS AND STANDARDS IE1 - MAA / BAA Series Technical
FLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
(E) Atmospheres containing explosive GAS General information Flameproof totally enclosed three-phase asynchronous motors, FLSD (E) series, according to IEC 60034, 60038, 60072, 60079-0 and 60079-1, EN
MAX - E3 - H66. High Efficiency. ToTally EnclosEd Fan-coolEd cast Iron FramE series. Low Voltage 3-Phase Induction Motors. Range 0.
High Efficiency Low Voltage 3-Phase Induction Motors MAX - E3 - H66 Range 0.18kW to 450kW ToTally EnclosEd Fan-coolEd cast Iron FramE series Contents page page PRODUCT DETAILS General Information 2 Electrical
AC motors IE1/IE2/IE3
AC motors IE1/IE2/IE3 AC motors Page About eficiency classes and AC motors 2-3 UBAT standard eficiency class IE1, 2-pole 4 UBAT standard eficiency class IE1, 4-pole 5 UBAT standard eficiency class IE1,
[ T] THREE-PHASE MOTORS «[32] [33] Three-Phase Motors - Technical Catalogue 1018/10
![[ T] THREE-PHASE MOTORS «[32] [33] Three-Phase Motors - Technical Catalogue 1018/10](/thumbs/93/114259204.jpg "[ T] THREE-PHASE MOTORS «[32] [33] Three-Phase Motors - Technical Catalogue 1018/10")
THREE-PHASE MOTORS «[32] [33]» MECHANICAL DESIGN Terminal boxes The location of the terminal box in standard design is on top; on the right or on the left are possible. Motors 71-160 frame size have removable
THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS ACCORDING IEC
THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS ACCORDING IEC 60034-30 1st EDITION IE1/IE2-MS IE1/IE2-EG Series IE1 Standard efficiency IE2 High efficiency THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS
Series E4F E5F
Three Phase Induction Motors With Rotors Wound for Hoists Series E4F 160-315 E5F 355-400 ASI NT 003.1 I N D E X Use 2 Electrical Tolerances 9 Mechanical Tolerances 9 General Characteristics 2 Technical
M O T O R S. T E C Electric Motors Ltd.
M O T O R S T E C Electric Motors Ltd. GENERAL INFORMATION THREE PHASE-TECA/TECC TYPES-IE1/IE SINGLE PHASE-TPC/TCC TYPES BRAKE MOTOR-TECA-BM TYPE THREE PHASE MOTORS ECOL-IE1/IE/IE3 TEC motors are designed
ELK PRODUCT CATALOGUE. elkmotor.com.tr
ELK 0501-0418 PRODUCT CATALOGUE elkmotor.com.tr THREE PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS ELK Motor has been founded by major shareholders of Yılmaz Reduktor, as a continuation of the product family.
PLS Open Drip Proof three-phase asynchronous motors. General information
General information Open Drip Proof three-phase asynchronous motors, series PLS, according to IEC 60034, 60066, 60072 power 7,5 kw to 900 kw, frame size 160 to 400 mm, 2, 4, 6 and 8 ; 230/400 V or 400
ARAGON MOTO R S. Three Phase Induction Motors
ARAGON MOTO R S Three Phase Induction Motors Introduction PEM series motors are defined as totally enclosed, fancooled, squirrel cage type and noted for their novel design, beautiful modelling, compact
W22 NEMA Brake Motors - NEMA Premium
101 www.pamensky.com TEFC Standard Features Motors are compliant with DOE and NRCAN Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 208-230/460V, 575V Brake power supply: 220/230/240/460/575V Totally Enclosed
LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES
LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES FRAMES 355 560 355kW 1500kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in
TOTALLY ENCLOSED FAN-COOLED CAST IRON FRAME SERIES
Low Voltage 3-Phase Induction Motors MAX - E2 Range 0.18kW to 185kW TOTALLY ENCLOSED FAN-COOLED CAST IRON FRAME SERIES Contents page page PRODUCT DETAILS General Information 2 Electrical Design and Standards
SINGLE PHASE TEFC CAGE MOTORS
SINGLE PHASE TEFC CAGE MOTORS 2 SINGLE PHASE TEF CAGE MOTORS Mechanical protection: IP 54 Voltage: 220 V, 50 Hz Type Output power P N kw Rated speed n N min -1 Efficiency % Power factor cos Rated current
MARATHON SLA SERIES CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES , KW
MARATHON SLA SERIES CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES 56-160, 0.09-18.5KW MARATHON SLA SERIES CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES 56-160, 0.09-18.5KW INTRODUCTION 3 Standards
MARATHON HLA SERIES HLA CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES , KW
MARATHON HLA SERIES HLA CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES 80-160, 0.75-18.5KW MARATHON HLA CAST ALUMINIUM MULTI-MOUNT THREE PHASE MOTORS SIZES 80 TO 160, 0.75 TO 18.5KW INTRODUCTION 3
IE2 and IE3 THREE PHASE ASYNCHRONOUS ELECTRIC MOTORS PRODUCT CATALOGUE ELK
IE2 and IE3 THREE PHASE ASYNCHRONOUS ELECTRIC MOTORS PRODUCT CATALOGUE ELK 000-0616 PRODUCTION SITE AND PRODUCTION TECHNOLOGY ELK Motor has been founded by major shareholders of Yılmaz Redüktör A.Ş. as
LSN Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information
General information Non-sparking totally enclosed threephase asynchronous motors, LSN series, according to IEC 60034, 60072, IEC 60079-1 and 60079-15. Single speed: power 0.75 to 90 kw 1, frame size 80
Low Voltage Induction Motors
Low Voltage Induction Motors Catalogue-2009/04 E TAC-C CAST IRON Frame Size 71->355 0,18-315 kw t-telectric.com Technical features TAC-C motors are designed and manufactured according to IEC34, IEC72,
PRODUCT DETAILS TECHNICAL DETAILS
Contents page Welcome to TECO 1 PRODUCT DETAILS General Information 2 Electrical Design and Standards Altitude 2 Ambient 2 Direction of Rotation 2 Duty Rating 2 Electrical Supply 2 Motor Types / MEPS 2
EFF2 Three-Phase TEFC Induction Motors
Providing You Revolutionary Solutions EFF2 Three-Phase TEFC Induction Motors introduction Founded in 1981, Electric & Machinery is a premier induction motor manufacturer started up by a group of veterans
MINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR
MINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280
Ordering information. When placing an order, specify motor type, size and product code according to the following example.
Ordering information When placing an order, specify motor type, size and product code according to the following example. Example Motor type M3AA 112 MB Pole number 4 Mounting arrangement (IM-code) IM
MINING ELECTRIC MOTORS 3KTCR AND 4KTCR
MINING ELECTRIC MOTORS 3KTCR AND 4KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280 Frame
End Suction Range MARCH 2018
End Suction Range MARCH 2018 INDEX QB Peripheral Vane Pump... 4 Performance Data... 5 CPM Single Stage Pumps... 6 2CPM Twin Stage Pump... 10 Performance Data... 11 JSWM Self-Priming Jet Pump... 12 Performance
A B C D, E, F M2BA 112 MB 3GBA ADB, 122, 451, etc
Ordering information When placing an order, please state the following minimum data in the order, as in the example. The product code of the motor is composed in accordance with the following example.
ELECTRIC MOTORS 3SIE IE3
EECTRIC MOTORS 3SIE IE3 TECHNIC INFORMTION TYE 3SIE IE3 Construction 3SIE have a stator house in aluminum from frame 80-112. End shields are in aluminum in frame 80-100 and in cast iron from frame 112.
THREE PHASE ASYNCHRONOUS MOTORS. MS/S Series (frame Aluminum) TC Series (frame Cast iron) Y Series (frame Cast iron)
THREE PHASE ASYNCHRONOUS MOTORS MS/S Series (frame 56-200 Aluminum) TC Series (frame 160-355 Cast iron) Y Series (frame 132-355 Cast iron) INDICE 01. General features p.03 02. Standards p.04 03. Mounting
CONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances
CONTENTS 1 GENERAL 2 STANDARDS 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances 4 MOTOR DESIGN 4.1 Stator Casing 4.2 Stator Core with Winding 4.3 Stator Winding and Insulation
W22 Medium Voltage Motors TEFC - Severe Duty
101 www.pamensky.com W22 Medium Voltage Motors TEFC - Severe Duty Standard Features Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 1200V, 2300V, 2400V, 3300V, 4000V, 4160V & 6600V Totally Enclosed Fan
THREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE
CAG Electric Machinery HGLIE2 series THREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE Introduction Motors HGL IE2 with cast iron frame offers increased power output with reduced power consumption. This
Energy-efficient Cast Iron Three Phase Induction Motors 50 Hz
Energyefficient Cast Iron Three Phase Induction Motors Hz IE 1 / www.pumpsgp.com IE / ENERGYEFFICIENT CAST IRON CONTENTS SPECIFICATIONS APPLICATIONS FEATURES AND BENEFITS BENEFITS OF ENERGY EFFICIENT MOTORS
Company name: GSI Created by: SLK Phone: (65) Date: 13/03/2017 Client: Client Number: Contact:
Qty. Description 1 2L Product No.: 81U1332 The motor is a 3-phase AC standard motor. Installation: Range of ambient temperature: -2.. C Flange size for motor: FF Note! Product picture may differ from actual
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY AESV2S / AESU2S / AESV2S-LA (IE2) HIGH EFFICIENCY AESV3S / AESU3S / AESV3S-LA (IE3) PREMIUM
Brake Motors Aluminium Frame Improved Efficiency EFF2
Motors Energy Automation Coatings Brake Motors Aluminium Frame Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC Output: 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
General Specifications. Cooling Method 3M series are IC 411 Standard. IC 416, IC 418 can be provided Upon request
3M SERIES Three Phases Low Voltage Asynchronous Motors 3M Series Vilma motors are designed and manufactured with high quality materials and workmanship in order to meet demanding and arduous operation
ANNEX No 1. C 17/05/2006 SGA112B TERMINAL BOX ARRANGEMENT Ex e, Ex na &Ex td V (OPTION 2)
ANNEX No 1 DRAWINGS Drawing No. Drawing Description Revision Date Ex e, na and td SGA100A General Arrangement for SGA 71 frame motor C 16/06/2006 SGA101A General Arrangement for SGA 80-132 frame motor
IEC Low Voltage Induction Motors 400 V 50 Hz. Motors for all applications
IEC Low Voltage Induction Motors 400 V 50 Hz Motors for all applications Making you more competitive BB has been manufacturing motors for over 100 years. Our products are designed to be reliable, effi
CONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Technical Data 3.2 Standard Accessories 3.3 Tolerances
CONTENTS 1 GENERAL 2 STANDARDS 3 TECHNICAL FEATURES 3.1 Basic Technical Data 3.2 Standard Accessories 3.3 Tolerances 4 MOTOR DESIGN 4.1 Stator Casing 4.2 Stator Core with Winding 4.3 Stator Winding 4.4
LSES high efficiency three-phase asynchronous motors General information
General information Efficiency class IE2 Totally enclosed three-phase powersaving asynchronous motors, LSES series, according to IEC 60034, 60038, 60072 ; power 0.75 to 200 kw, frame size 80 to 315 mm.
Catalog. Low voltage General performance IE2 high efficiency motors according to EU MEPS
Catalog Low voltage General performance IE2 high efficiency motors according to EU MEPS We provide motors, generators and mechanical power transmission products, services and expertise to save energy and
LSES high efficiency three-phase asynchronous motors. General information
Efficiency class IE2 General information Totally enclosed three-phase saving asynchronous motors, series, according to IEC 60034, 60038, 60072 ; 0.75 to 200 kw, frame size 80 to 315 mm. Single speed: 2,4
MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY
MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY TYPE AEHE, AEHH8N, AEHH8NCF, AEUH8NDC Effective 05-01-13 Supercedes 08-01-11 APPLICATIONS: Fans & Blowers Compressor Any Severe Duty/ Petro-Chem/ Pumps Mixers Pulp
General Purpose Cast Iron Motors
General Purpose Cast Iron Motors Totally enclosed squirrel cage three phase low voltage motors, Sizes 71-355, 0.25 to 250 kw www.abb.com/motors&drives > Motors > Low voltage motors > General purpose motors
BFG range BFGC range BFN range
BFG range BFGC range BFN range LOW AND MEDIUM VOLTAGE MOTORS FOR HAZARDOUS AREAS EEx d EEx de EEx na - Flameproof Motors - Flameproof Motors With Increased Safety Terminal Box - Non Sparking Motors TABLE
ETM motors Data Book 50Hz - 60Hz
Japanese Technology since 1912 ETM motors Data Book 50Hz - 60Hz 50 HZ ETM MOTORS Page CONTENTS SPECIFICATIONS 1 MOTORS SPECIFICATIONS 101 2 TYPE KEY and NAMEPLATE 201 3 TECHNICAL DATA 301 4 MOTORS DATA
A6C A5C-B6C B5C B5H A6C A5C B6C B5C B5H. Model. Up to kw. Power. Up to V. Voltages. Model IP55. Frame Pole 2, 4, 6, 8 and 10
A6C A5C-B6C B5C B5H Model Power Voltages Model IP55 A6C A5C B6C B5C B5H Up to 2.400 kw Up to 11.000 V LV A6C - B6C - A5C - B5C MV B5H Frame 71 560 Pole 2, 4, 6, 8 and 10 Cooling IC 411 ( IC 416 optional)
FCR asynchronous brake motors LS FCR. General information
General information LIFTING USE : U.L. Enclosed three-phase asynchronous brake motors, LS series with failsafe brake, according to IEC 34, 72, EN 50281. Single speed : 0.55 to 15, frame size from 80 to
Variable speed asynchronous motors with FCPL brake LSMV FCPL. General information
General information GENERAL USE : U.G. Enclosed three-phase asynchronous brake motors, LSMV series with failsafe continuous current (dc) brake, according to IEC 60034, 60072, EN50281. Separate mains supply
IEC Low Voltage Induction Motors 400 V 50 Hz. Motors for all applications
IEC Low Voltage Induction Motors 400 V 50 Hz Motors for all applications Making you more competitive ABB has been manufacturing motors for over 100 years. Our products are designed to be reliable, effi
M3000 Steel Motors. ABB LV Motors M3000 Range
M3000 Steel Motors ABB LV Motors M3000 Range Making you more Competitive ABB LV Motors knows about customer needs. For over 100 years we have been designing motors for every need and application. With
Squirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES SIZES. MarelliMotori ASI.CT.033.2
Marine Motors Three Phase Squirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES 63-400 SIZES MarelliMotori ASI.CT.033.2 CONTENTS Page STANDARDS 5 ESSENTIAL AND NON-ESSENTIAL SERVICE 5 CLASSIFICATION
PPA & PPC series motors High specification cast iron units
Edition 4 Issue 3 PPA & PPC series motors High specification cast iron units Accreditation No. 14396 SOLUTIONS, not just products Specialists in Electric Motors & AC Drives At CMG we offer customised packages
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 076 203 PERFORMANCE CURVES 106 204 - CONSTRUCTIONS 300 SECTIONAL
ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame. Australian Version October 2013
ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame Australian Version October 2013 ODP SERIES (OPEN DRIP PROOF) PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS, C280M TO C355LB FRAME
Cast Iron Frame Motors For Zone 21 Improved Efficiency EFF2
Motors Energy Automation Coatings Cast Iron Frame Motors For Zone 21 Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP66, TEFC : 0.12 up to 250kW Frames: 63 up to 355M/L Voltage:
PRICE LIST & BASIC DATA
ROTOR (UK) LIMITED PRICE LIST & BASIC DATA www.rotor.co.uk rotor nl special motors available inclusive of marine execution! Ask for details! November 2008 Three-phase TEFC Squirrel Cage Standard Motors
Standardmotoren Standard motors
Standardmotoren Standard motors Contents Product description 2/2 Overview of technical data 2/5 2 Series W4.R for Premium Efficiency IE3 2/6 Series WE.R for High Efficiency IE2 2/14 Series K2.R for Standard
CAplus Totally Enclosed Fan Cooled motor
DEP2016.06.20.00EN CAplus Totally Enclosed Fan Cooled motor www.nidec-industrial.com Introduction The new CAplus helps End Users reduce Operating Expenses (OPEX) Higher power density and better efficiency
General Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
Low Voltage AC Motors
Smart solutions. Strong relationships. Low Voltage AC Motors Efficiency class Eff- We put all our energy into saving yours! Crompton Greaves (CG) is part of the US$ bn Avantha Group,a conglomerate with
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.75 203 PERFORMANCE CURVE 1.00 204 - CONSTRUCTIONS 300 SECTIONAL VIEW
MG Model C & D 3 phase kw
GRUNDFOS MOTORS MG Model C & D 3 phase 0.25-11 kw Grundfos motors in a of their own Grundfos is one of the world s leading manufacturers of pumps and pumping equipment. Therefore, highquality electrical
IEC Range Three phase IEC low voltage motors - 56 to 355 frames. Single phase motors - 56 to 100 frames Capacitor Run Capacitor Start and Run
CONTENTS Page 3 Selected Range of Motors RANGE INCLUDES.. Page 4 to 5 Standard Compliance Page 6 to 9 General Specifications Page 10 2 Pole - 3000 RPM Synchronous Speed 50 Hz Page 11 4 Pole - 1500 RPM
Severe Duty is Standard with WEG W22 motors
W22 Severe Duty TEFC Severe Duty is Standard with WEG W22 motors W22 Severe Duty TEFC Severe Duty High performance with maximum energy efficiency is the goal of the new WEG electric motor. High efficiency
HLA series Cast aluminium multi-mount
HLA series Cast aluminium multi-mount We convert power into motion to help the world run more efficiently BUSINESS PURPOSE ABOUT US Regal Beloit Corporation is a leading manufacturer of electric motors,
ASM. Asynchronous Spindle. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom
NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()1689 8847 Fax: +44 ()1689 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 2.1 June 211
TRANSNORM LOW VOLTAGE MOTORS IC 411 TN LV 1 4E5
TechnicalDocumentation TN LV 1 4E5 TRANSNORM LOW VOLTAGE MOTORS IC 411 Mission, Vision, Targets Our electric motors and generators are optimized in accordance with our client's technical and economical
DYNEO VARIABLE SPEED DRIVES Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors
Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet 0.75 kw to 400 kw Technical catalogue 4936 en - 2012.10 / b Rectifier Simplicity Performance Install and start using your system quickly
1 THREE-PHASE CAGE INDUCTION MOTORS
THREE PHASE CAGE INDUCTION MOTORS CATALOGUE PAGES 1 THREE-PHASE CAGE INDUCTION MOTORS Technical data : Single-speed motors, series 5AZ 56-160 &7AZ 132-250 Single-speed motors with increased powers, series
GRUNDFOS MOTORS. MG Model B single phase kw
GRUNDFOS MOTORS MG Model B single phase 0.18-2.2 kw Grundfos motors in a class of their own Grundfos is one of the world s leading manufacturers of pumps and pumping equipment. Therefore, high-quality
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 0.50 203 PERFORMANCE CURVE 0.80 204 PERFORMANCE CURVE 1.00 205 PERFORMANCE
3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
Smart solutions. Strong relationships. LV BRAKE MOTORS
Smart solutions. Strong relationships. LV BRAKE MOTORS Crompton Greaves (CG) is part of the US$ bn Avantha Group,a conglomerate with an impressive global footprint. Since its inception CG has been synonymous
MAX-E1 HIGH EFFICIENCY. Severe Duty
MAX-E1 HIGH EFFICIENCY Severe Duty DESIGN FEATURES & CONSTRUCTION ALL MAX-E1 MOTORS DELIVER THESE IMPRESSIVE DESIGN FEATURES HPE - High Pulse Endurance Wire Non-hygroscopic, Class F insulation system High-grade,
Industrial Performance Motors. New Aluminum and Cast Iron Motors. Flexibility
Industrial Performance Motors New Aluminum and Cast Iron Motors Flexibility Low Voltage Industrial Performance Motors Flexibility Industrial performance motors offer the flexibility needed by most of our
PRA EBAR. RA Pumps Europe S.p.A. CENTRIFUGAL PUMPS CONTENTS. 60Hz. Page - SPECIFICATIONS
CONTENTS Page SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 20 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 203 CONSTRUCTIONS SECTIONAL VIEW MECHANICAL SEAL (UP TO 0.75 kw) MECHANICAL
PPA SERIES II. CEG is an Australasian leader of electric motors and water pumps for the mining, industrial, commercial, domestic and rural markets.
1 PPA SERIES II THREE PHASE PREMIUM MINING MOTORS, 80 TO 450XL FRAME 3 YEAR STANDARD WARRANTY CEG is an Australasian leader of electric motors and water pumps for the mining, industrial, commercial, domestic
General Purpose 3-Phase Induction Motors
General Purpose 3Phase Induction Motors 008 Product Catalogue General Purpose 3Phase Induction Motors Certificates Cantoni Motor S ISO 900 KEM Since September 30, 999 Number 9955 Besel S ISO 900 DQS Since