Low Voltage Induction Motors

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Low Voltage Induction Motors"

Transcription

1 Low Voltage Induction Motors Catalogue-2009/04 E TAC-C CAST IRON Frame Size 71->355 0, kw t-telectric.com

2 Technical features TAC-C motors are designed and manufactured according to IEC34, IEC72, DIN42673, BS4999, AS1359, GB755, GB10069, and Q/JBQS27. High efficiency 1. 1 kw 90 kw 2P and 4P, in S1 duty TAC-C motors are within the class 2 of CEMEP-EU standard, saving energy and operating costs. Voltage ranges A wide range of voltages up to a max. of 690 V available for 50 Hz and 60 Hz. Reliable windings To ensure long lifetime, the windings are made of the latest available materials in class F protection and temperature rise limited to class B in standard motors. Strong corrosion protection The motors are made to withstand aggressive environments as standard and they are designed for long lifetime. For motors with regreasing possibility, they have strong and effective protection against corrosion. Bearings with high load capacity All motors are provided with deep-groove ball bearings, with long lifetime. Cast iron motor in sizes are greased for life and those in sizes have regreasable bearings as standard. Low noise level The TAC-C range has been designed to minimize motor noise levels by means of improving magnetic and electrical design, ventilator condition, structure size and technology. Winding protection PTC thermistors thermal-switches and anti-condensation heaters on request. Mechanical design Totally enclosed fan cooled IP55 Heavy duty design, manufactured from corrosion resistant cast iron materials to be used in all kinds of environment. The motor is mechanically very strong and robust and as standard designed for additional energy saving through frequency converter drives. Drain holes and plugs as standard in sizes 280 to 355. Powerful refit available The motors satisfy the requirements of a wide range of environments and applications. Improved protection, insulation level, regreasing facilities, dust-proof, sealing rings, rainproofing are all available. A full range of options are listed on pages Flexible cable entry direction Terminal boxes are mounted on the top, right or left, of the motors. Terminal boxes of motor size can rotate 4x90. All are easy to refit. Code assignment TAC - C 180 M 4 Motor type Cast iron housing Number of pole Core length Motor size Application data - Altitude : maximum 1000 meters above sea level - Ambiant temperature : max. 40 c - Duty cycle : Continuous S1 - Insulation class F - Temperature rise : 80 K 2

3 Insulation In most cases the standard rated outputs of motors from T-T Electric are based on the temperature rise for insulation class B. Where the temperature rise is according to class F, this is specified in the data tables. However, all motors are designed with class F insulation, which permits a higher temperature rise than class B. The motors, therefore, have a generous overload margin. If temperature rise to class F is allowed, the outputs given in the tables can generally be increased by about 12%. Temperature limits are according to standards. The extra thermal margin when using class F insulation with class B temperature rise makes the motors more reliable. C Thermal margin Permissible temperature rise (K) Maximum ambient temperature Insulation class B F H Ambiant temperatures / high altitudes Motors are designed for a maximum ambianti temperature environment of 40 C and a maximum altitude of 1000 meters above sea level. If temperature and/or altitude is higher, motor should be derated according to tables below. Ambient temperature, C * 70* 80* Permitted output, % of rated output , Height above sea level, m Permitted output, % of rated output *High temperature grease and reduced greasing intervals recommended Other voltages Motors wound for a given voltage at 50 Hz can also be used for other voltage. Recalculation factors for current and torque are given below, efficiency, power factor and speed remain approximately the same. Guaranteed values available on request. Motor wound for 230V 400V 500V 690V Connected to 50Hz 220V 230V 380V 415V 500V 550V 660V 690V % of values at 400V 50Hz Output In Is/In Ts/Tn Tmax/Tn

4 Motors used at 60 Hz Motors wounded for a given voltage at 50 Hz can be used at 60 Hz without modification, considering recalculations factors here under.. Motor wounded for 50 Hz and 220 V At 60Hz At 60 Hz, percentages of values at 50 Hz Power Speed Current Is/In Tn Ts/Tn Tmax/Tn % 120% 98% 83% 83% 70% 85% Bearings and terminal box The motors are normally fitted with single-row deep groove ball bearings as listed in the table below. Terminal boxes are mounted on top of the motor. The terminal box of motor sizes 71 to 132 can be turned 4 x 90 and in motor sizes 160 to 355 rotated 2 x 180 degree. Protection of the standard terminal box is IP55. The motors are supplied with 2 cable entries as standard according to the table below. Standard bearing type Cable entry Pole D-end N-end mm 71 2,4,6, RS/C RS/C3 2-M25X1,5 80 2,4,6, RS/C RS/C3 2-M25X1,5 90 2,4,6, RS/C RS/C3 2-M25X1, ,4,6, RS/C RS/C3 2-M25X1, ,4,6, RS/C RS/C3 2-M32X1, ,4,6, RSC RS/C3 2-M32X1, ,4,6, RS/C RS/C3 2-M40X1, RS/C RS/C3 2-M40X1, ,6, RS/C RS/C3 2-M40X1, RS/C RS/C3 2-M50X1, ,6, RS/C RS/C3 2-M50X1, /C3 6312/C3 2-M50X1, ,6,8 6313/C3 6312/C3 2-M50X1, /C3 6313/C3 2-M63X1,5 Standard bearing type Cable entry Pole D-end N-end mm 250 4,6,8 6314/C3 6313/C3 2-M63X1, /C3 6314/C3 2-M63X1, ,6,8 6317/C3 6314/C3 2-M63X1, /C3 6317/C3 2-M63X1, ,6,8,10 N /C3 2-M63X1, /C3 6319/C3 2-M63X1, ,6,8,10 N /C3 2-M63X1,5 Regreasable bearings available from size 160 (included) Bearing seals : radial seal up to frame size 225 (included) - axial seal from 250 to 355 (included) 4

5 Motors for EU efficiency levels T-T Electric have a motor range to meet or exceed the minimum efficiencies stated in the highest level of the EU agreement of LV motors. These efficiency levels apply to 2- and 4-pole, three phase squirrel cage induction motors, rated for 400 V, 50 Hz, with S1 duty class with the output 1.1 to 90 kw which account for the largest volume on the market. Three phase induction motors, 400 V 50 Hz T-T Electric motor efficiency levels 2 pole 4 pole EFF1 95 EFF1 Efficiency (%) EFF2 EFF3 Efficiency (%) EFF2 EFF3 Output (kw) Output (kw) EU efficiency classes Output kw 2 pole Limit EFF2/EFF3 2 pole 4 pole Limit EFF2/EFF3 EFF1/EFF2 1,1 76,2 82,8 76,2 83,8 1,5 78,5 84,1 78,5 85 EFF1/EFF2 2, , ,4 3 82,6 86,7 82,6 87,4 4 84,2 87,6 84,2 88,3 5,5 85,7 88,6 85,7 89,2 7, , , ,4 90,5 88, ,4 91,3 89,4 91,8 18, , , ,5 92,2 90,5 92, ,4 92,9 91,4 93, , , ,5 93,7 92,5 93, , ,6 94,6 93,6 94, , ,9 95 5

6 Technical Data H Hz Output kw designation Speed n r/min Efficiency Full load 100% 3000 r/min = 2 poles, 400V 50Hz 3/4 load 75% Power factor cos Current Torque Moment of inertie inj=gd2/4 kgm2 Weight kg) In A Is In Tn Nm Ts Tn Tmax Tn 0,37 TAC-C 71A ,0 68,0 0,82 0,9 6,1 1,3 2,2 2,2 0, ,55 TAC-C 71B ,0 72,4 0,82 1,3 6,1 1,9 2,2 2,2 0, ,75 TAC-C 80A ,0 75,5 0,85 1,7 6,1 2,5 2,2 2,2 0, ,1 TAC-C 80B ,0 77,9 0,85 2,4 7,0 3,7 2,2 2,2 0, ,5 TAC-C 90S ,0 79,0 0,87 3,2 7,0 5,0 2,2 2,2 0, ,2 TAC-C 90L ,5 81,8 0,86 4,5 7,0 7,4 2,2 2,2 0, TAC-C 100L ,0 83,2 0,88 5,9 7,0 10 2,2 2,2 0, TAC-C 112M ,0 84,6 0,90 7,6 7,0 13,2 2,2 2,2 0, ,5 TAC-C 132SA ,5 87,9 0,89 10,2 7,0 18 2,2 2,2 0, ,5 TAC-C 132SB ,5 90,1 0,90 13,6 7,0 24,5 2,2 2,2 0, TAC-C 160MA ,0 90,5 0,89 19,8 6,5 35,9 2,5 3,0 0, TAC-C 160MB ,0 90,1 0, ,5 49 2,5 3,2 0, ,5 TAC-C 160L ,5 90,9 0,90 32,8 6,5 60,3 2,5 3,2 0, TAC-C 180M ,8 91,0 0,90 38,9 6,5 71,5 2,3 2,8 0, TAC-C 200LA ,4 91,1 0,90 52,6 6,5 97 2,2 2,7 0, TAC-C 200LB ,2 91,8 0,90 64,4 6, ,3 2,7 0, TAC-C 225M ,6 92,2 0,89 78,8 7, ,5 2,8 0, TAC-C 250M ,4 91,7 0,89 96,5 7, ,4 3,0 0, TAC-C 280S ,0 92,3 0, , ,5 3,3 0, TAC-C 280M ,3 92,4 0, , ,3 3,2 0, TAC-C 315S ,0 92,2 0, , ,8 2,2 1, TAC-C 315M ,5 93,0 0, , ,8 2,2 1, TAC-C 315LA ,6 93,5 0, , ,8 2,2 1, TAC-C 315LB ,8 94,0 0, , ,8 2,2 1, TAC-C 355M ,4 94,5 0, , ,3 2,8 3, TAC-C 355L ,0 95,3 0, , ,0 2,8 3, Sound pressure level Lp db(a) Output kw designation Speed n r/min Efficiency Full load 100% 1500 r/min = 4 poles, 400V 50Hz Current Torque Moment 3/4 Power of inertie load factor In Is Tn Ts Tmax inj=gd2/4 75% cos A In Nm Tn Tn kgm2 Weight kg) 0,25 TAC-C 71A ,5 63,3 0,72 0,8 5,2 1,7 2,1 2,0 0, ,37 TAC-C 71B ,5 69,4 0,75 1,0 5,2 2,5 2,1 2,0 0, ,55 TAC-C 80A ,5 71,4 0,72 1,5 5,2 3,7 2,4 2,0 0, ,75 TAC-C 80B ,5 75,2 0,76 1,9 6,0 5,1 2,4 2,2 0, ,1 TAC-C 90S ,5 77,8 0,78 2,6 6,0 7,5 2,3 2,2 0, ,5 TAC-C 90L ,5 79,2 0,79 3,5 6,0 10,3 2,3 2,2 0, ,2 TAC-C 100LA ,5 82,3 0,81 4,9 a6,0 14,7 2,3 2,2 0, TAC-C 100LB ,8 82,5 0,83 6,3 6,5 20,2 2,3 2,2 0, TAC-C 112M ,0 84,6 0,82 8,3 6,5 26,7 2,3 2,2 0, ,5 TAC-C 132S ,0 87,1 0,85 10,9 6,5 36,7 2,3 2,2 0, ,5 TAC-C 132M ,5 88,3 0,85 14,4 6,5 49,7 2,3 2,2 0, TAC-C 160M ,5 90,0 0,85 20,9 6,5 72,0 2,4 2,8 0, TAC-C 160L ,0 90,4 0,86 28,0 6,5 98,1 2,3 2,4 0, ,5 TAC-C 180M ,0 90,9 0,86 34,1 6, ,3 3,0 0, TAC-C 180L ,0 90,0 0,88 39,4 6, ,4 3,0 0, TAC-C 200L ,2 91,8 0,88 53,4 6, ,2 2,8 0, TAC-C 225S ,6 91,2 0,85 67,9 7, ,2 2,8 0, TAC-C 225M ,8 91,7 0,87 80,5 7, ,2 2,8 0, TAC-C 250M ,4 91,3 0,87 98,5 7, ,4 3,0 0, TAC-C 280S ,0 93,9 0, , ,4 2,6 1, TAC-C 280M ,3 94,6 0, , ,3 2,8 1, TAC-C 315S ,5 93,5 0, , ,1 2,2 2, TAC-C 315M ,8 94,0 0, , ,1 2,2 3, TAC-C 315LA ,9 94,5 0, , ,1 2,2 3, TAC-C 315LB ,0 94,2 0, , ,1 2,2 4, TAC-C 355M ,3 94,5 0, , ,1 2,6 6, TAC-C 355L ,6 94,8 0, , ,1 2,3 8, Sound pressure level Lp db(a)

7 Technical Data H Hz Output kw Output kw designation designation Speed n r/min Speed n r/min Efficiency Full load 100% Efficiency Full load 100% 3600 r/min = 2 poles, 460V 60Hz Current Torque Moment Power of inertie factor In Is Tn Ts Tmax inj=gd2/4 cos A In Nm Tn Tn kgm r/min = 4 poles, 460V 60Hz Power factor cos Current Torque Moment of inertie In Is Tn Ts Tmax inj=gd2/4 A In Nm Tn Tn kgm2 Weight kg) 0,43 TAC-C 71A ,0 0,83 1,0 6,1 1,2 2,2 2,2 0, ,63 TAC-C 71B ,0 0,84 1,4 6,1 1,8 2,2 2,2 0, ,86 TAC-C 80A ,0 0,88 1,7 6,1 2,4 2,2 2,2 0, ,27 TAC-C 80B ,0 0,88 2,4 7,0 3,5 2,2 2,2 0, ,73 TAC-C 90S ,0 0,87 3,3 7,0 4,8 2,2 2,2 0, ,53 TAC-C 90L ,5 0,86 4,7 7,0 7,0 2,2 2,2 0, ,45 TAC-C 100L ,0 0,89 6,1 7,0 9,6 2,2 2,2 0, ,6 TAC-C 112M ,0 0,91 7,9 7,0 12,6 2,2 2,2 0, ,33 TAC-C 132SA ,5 0,90 10,6 7,0 17,2 2,2 2,2 0, ,6 TAC-C 132SB ,5 0,91 14,0 7,0 23,4 2,2 2,2 0, ,7 TAC-C 160MA ,5 0,91 20,0 6,5 34,5 2,5 3,0 0, ,3 TAC-C 160MB ,6 0,91 27,2 6,5 47,0 2,5 3,2 0, ,3 TAC-C 160L ,8 0,91 33,5 6,5 57,8 2,5 3,2 0, ,3 TAC-C 180M ,1 0,90 40,1 6,5 68,5 2,3 2,8 0, ,5 TAC-C 200LA ,4 0,91 54,4 6,5 92,8 2,2 2,7 0, ,6 TAC-C 200LB ,2 0,91 67,3 6, ,3 2,7 0, ,8 TAC-C 225M ,2 0,90 81,9 7, ,5 2,8 0, TAC-C 250M ,8 0,91 96,9 7, ,4 3,0 0, TAC-C 280S ,0 0, , ,5 3,3 0, TAC-C 280M ,3 0, , ,3 3,2 0, TAC-C 315S ,5 0, , ,8 2,2 1, TAC-C 315M ,0 0, , ,8 2,2 1, TAC-C 315LA ,0 0, , ,8 2,2 1, TAC-C 315LB ,2 0, , ,8 2,2 1, ,5 TAC-C 355M ,7 0, , ,2 2,7 3, ,5 TAC-C 355L ,2 0, , ,9 2,7 3, Weight kg) 0,29 TAC-C 71A ,5 0,74 0,8 5,2 1,66 2,1 2,0 0, ,43 TAC-C 71B ,5 0,76 1,1 5,2 2,46 2,1 2,0 0, ,63 TAC-C 80A ,5 0,75 1,5 5,2 3,56 2,4 2,0 0, ,86 TAC-C 80B ,5 0,77 2,0 6,0 4,89 2,4 2,2 0, ,27 TAC-C 90S ,5 0,78 2,8 6,0 7,22 2,3 2,2 0, ,73 TAC-C 90L ,5 0,8 3,6 6,0 9,89 2,3 2,2 0, ,53 TAC-C 100LA ,5 0,82 5,0 6,0 14,05 2,3 2,2 0, ,45 TAC-C 100LB ,8 0,86 6,4 6,5 19,38 2,3 2,2 0, ,6 TAC-C 112M ,0 0,83 8,6 6,5 25,54 2,3 2,2 0, ,33 TAC-C 132S ,0 0,86 11,2 6,5 35,56 2,3 2,2 0, ,6 TAC-C 132M ,5 0,86 14,8 6,5 47,47 2,3 2,2 0, ,7 TAC-C 160M ,0 0,87 21,1 6,5 69,11 2,4 3,8 0, ,3 TAC-C 160L ,6 0,88 28,2 6,5 94,3 2,3 2,4 0, ,3 TAC-C 180M ,8 0,87 34,6 6,5 115,3 2,3 3,0 0, ,3 TAC-C 180L ,1 0,89 40,1 6, ,4 3,1 0, ,5 TAC-C 200L ,6 0,89 55,0 6,5 186,7 2,2 2,8 0, ,6 TAC-C 225S ,6 0,85 71,0 7,0 229,8 2,2 2,8 0, ,8 TAC-C 225M ,8 0,88 83,2 7,0 279,5 2,2 2,8 0, TAC-C 250M ,8 0,89 99,7 7,0 338,2 2,4 3,0 0, TAC-C 280S ,0 0, ,5 462,7 2,4 2,6 1, TAC-C 280M ,3 0, ,2 559,5 2,3 2,8 1, TAC-C 315S ,0 0, ,9 680,2 2,1 2,2 2, TAC-C 315M ,1 0, ,9 814,1 2,1 2,2 3, TAC-C 315LA ,3 0, ,9 986,1 2,1 2,2 3, TAC-C 315LB ,4 0, ,9 1232,6 2,1 2,2 4, ,5 TAC-C 355M ,6 0, , ,0 2,5 6, ,5 TAC-C 355L ,8 0, , ,0 2,2 8, Sound pressure level Lp db(a) Sound pressure level Lp db(a)

8 Technical Data H Hz Output kw designation Speed n r/min Efficiency Full load 100% 1000 r/min = 6 poles, 400V 50Hz Current Torque Moment 3/4 Power of inertie load factor In Is Tn Ts Tmax inj=gd2/4 75% cos A In Nm Tn Tn kgm2 Weight kg) 0,18 TAC-C 71A ,0 50,1 0,65 0,7 4,0 1,9 1,8 1,8 0, ,25 TAC-C 71B ,0 58,3 0,65 0,9 4,0 2,7 1,8 1,8 0, ,37 TAC-C 80A ,0 63,2 0,66 1,3 5,0 3,8 1,9 1,8 0, ,55 TAC-C 80B ,0 65,1 0,68 1,8 5,0 5,7 1,9 1,8 0, ,75 TAC-C 90S ,0 70,2 0,72 2,1 5,0 7,8 2,0 2,2 0, ,1 TAC-C 90L ,0 73,1 0,74 2,9 5,0 11,4 2,0 2,2 0, ,5 TAC-C 100L ,0 75,3 0,77 3,8 5,5 15,2 2,0 2,2 0, ,2 TAC-C 112M ,0 81,2 0,76 5,2 5,5 22,4 2,0 2,2 0, TAC-C 132S ,5 83,6 0,78 6,7 6,5 29,8 2,0 2,2 0, TAC-C 132MA ,0 84,2 0,77 8,9 6,5 39,8 2,0 2,2 0, ,5 TAC-C 132MB ,0 85,6 0,79 11,7 6,5 54,7 2,0 2,2 0, ,5 TAC-C 160M ,0 85,3 0,78 15,8 6,0 73,8 2,0 2,3 0, TAC-C 160L ,5 88,6 0, , ,2 2,3 0, TAC-C 180L ,0 89,1 0,82 29,7 6, ,3 2,8 0, ,5 TAC-C 200LA ,3 90,2 0,82 36,1 6, ,2 2,8 0, TAC-C 200LB ,4 90,3 0,83 42,3 6, ,1 2,8 0, TAC-C 225M ,8 89,2 0,78 61,1 6, ,2 2,8 0, TAC-C 250M ,2 92,4 0,88 66,5 6, ,3 2,8 0, TAC-C 280S ,6 91,3 0, , ,3 2,4 1, TAC-C 280M ,0 91,2 0,87 98,4 7, ,3 2,5 1, TAC-C 315S ,5 93,2 0, , ,0 2,0 3, TAC-C 315M ,8 91,9 0, , ,0 2,0 3, TAC-C 315LA ,3 93,5 0, , ,0 2,0 4, TAC-C 315LB ,5 93,8 0, , ,0 2,0 5, TAC-C 355MA ,7 93,9 0, , ,1 2,4 7, TAC-C 355MB ,9 94,0 0, , ,0 2,3 9, TAC-C 355L ,1 94,2 0, , ,0 2,4 11, Sound pressure level Lp db(a) Output kw designation Speed n r/min Efficiency Full load 100% 750 r/min = 8 poles, 400V 50Hz Current Torque Moment 3/4 Power of inertie load factor In Is Tn Ts Tmax inj=gd2/4 75% cos A In Nm Tn Tn kgm2 Weight kg) 0,18 TAC-C 80A ,0 50,1 0,6 0,9 3,3 2,46 1,8 1,9 0, ,25 TAC-C 80B ,5 53,3 0,6 1,1 3,6 3,41 1,8 1,9 0, ,37 TAC-C 90S ,5 62,1 0,61 1,4 4,4 5,05 1,8 1,9 0, ,55 TAC-C 90L ,5 63,3 0,61 2,1 4,7 7,5 1,8 2,0 0, ,75 TAC-C 100LA ,0 70,1 0,64 2,4 5,0 10,23 1,8 2,0 0, ,1 TAC-C 100LB ,5 70,3 0,65 3,5 5,0 15,01 1,8 2,0 0, ,5 TAC-C 112M ,0 75,4 0,68 4,3 5,0 20,46 1,8 2,0 0, ,2 TAC-C 132S ,0 81,8 0,70 5,6 5,5 29,59 1,8 2,0 0, TAC-C 132M ,0 81,4 0,75 7,1 5,5 40,35 1,8 2,0 0, TAC-C 160MA ,0 84,0 0,73 9,4 5,5 53,06 2,1 2,5 0, ,5 TAC-C 160MB ,5 85,6 0,74 12,6 5,5 72,95 2,1 2,5 0, ,5 TAC-C 160L ,5 85,8 0,74 16,9 5,5 99,5 2,1 2,5 0, TAC-C 180L ,7 87,0 0,77 23,5 5,4 143,9 2,0 2,8 0, TAC-C 200L ,0 89,4 0,76 32,0 5,5 196,2 2,3 2,8 0, ,5 TAC-C 225S ,0 89,1 0,75 39,6 5,5 238,8 2,1 2,8 0, TAC-C 225M ,5 8,16 0,75 46,8 6,0 283,9 2,2 2,8 0, TAC-C 250M ,3 90,1 0, ,5 387,2 2,3 2,6 0, TAC-C 280S ,8 91,7 0,79 74,2 6,0 477,5 2,1 2,6 1, TAC-C 280M ,4 91,1 0,79 89,5 6,0 580,7 2,1 2,7 1, TAC-C 315S ,8 91,5 0, ,9 709,8 1,8 2,0 3, TAC-C 315M ,0 91,9 0, ,0 967,9 1,8 2,0 4, TAC-C 315LA ,8 93,2 0, ,1 1161,5 1,8 2,0 5, TAC-C 315LB ,0 92,4 0, ,4 1419,6 1,8 2,0 6, TAC-C 355 MA ,7 93 0, ,4 1692,1 1,8 2,0 7, TAC-C 355 MB ,4 94,1 0, , ,8 2,0 10, TAC-C 355 L ,5 93,9 0; ,4 2563,4 1,8 2,0 12, Sound pressure level Lp db(a)

9 Technical Data H Hz Output kw designation Speed n r/min Efficiency Full load 100% 1200 r/min = 6 poles, 460V 60Hz Current Torque Moment Power of inertie factor In Is Tn Ts Tmax inj=gd2/4 cos A In Nm Tn Tn kgm2 Weight kg) 0,21 TAC-C 71A ,0 0,66 0,8 4,0 1,8 1,8 1,8 0, ,29 TAC-C 71B ,0 0,66 1,0 4,0 2,6 1,8 1,8 0, ,43 TAC-C 80A ,0 0,67 1,3 5,0 3,7 1,9 1,9 0, ,63 TAC-C 80B ,0 0,68 1,9 5,0 5,5 1,9 1,9 0, ,86 TAC-C 90S ,0 0,73 2,2 5,0 7,4 2,0 2,2 0, ,27 TAC-C 90L ,0 0,75 3,0 5,0 11,0 2,0 2,2 0, ,73 TAC-C 100L ,0 0,77 3,9 5,5 14,6 2,0 2,2 0, ,53 TAC-C 112M ,0 0,77 5,4 5,5 21,1 2,0 2,2 0, ,45 TAC-C 132S ,5 0,79 7,0 6,5 28,7 2,0 2,2 0, ,6 TAC-C 132MA ,0 0,79 9,1 6,5 38,2 2,0 2,2 0, ,33 TAC-C 132MB ,0 0,80 12,1 6,5 52,6 2,0 2,2 0, ,6 TAC-C 160M ,0 0,79 16,2 6,0 70,4 2,0 2,3 0, ,7 TAC-C 160L ,9 0,80 23,2 6, ,2 2,3 0, ,3 TAC-C 180L ,1 0,83 30,0 6, ,3 2,8 0, ,3 TAC-C 200LA ,9 0,84 36,6 6, ,2 2,8 0, ,3 TAC-C 200LB ,0 0,85 43,4 6, ,1 2,8 0, ,5 TAC-C 225M ,9 0,78 63,9 6, ,2 2,8 0, ,6 TAC-C 250M ,8 0,89 67,8 6, ,3 2,8 0, ,8 TAC-C 280S ,6 0,87 84,4 6, ,3 2,4 1, TAC-C 280M ,0 0, , ,3 2,5 1, TAC-C 315S ,8 0, , ,0 2,0 3, TAC-C 315M ,0 0, , ,0 2,0 3, TAC-C 315LA ,5 0, , ,0 2,0 4, TAC-C 315LB ,0 0, , ,0 2,0 5, TAC-C 355MA ,9 0, , ,0 2,3 7, TAC-C 355MB ,1 0, , ,9 2,2 9, ,5 TAC-C 355L ,3 0, , ,9 2,3 11, Sound pressure level Lp db(a) Output kw designation Speed n r/min Efficiency Full load 100% 900 r/min = 8 poles, 460V 60Hz Current Torque Moment Power of inertie factor In Is Tn Ts Tmax inj=gd2/4 cos A In Nm Tn Tn kgm2 Weight kg) 0,21 TAC-C 80A ,8 0,54 0,9 3,3 2,5 1,8 1,9 0, ,29 TAC-C 80B ,6 0,55 1,1 3,6 3,4 1,8 1,9 0, ,43 TAC-C 90S ,7 0,56 1,6 4,4 5,0 1,8 1,9 0, ,63 TAC-C 90L ,8 0,58 2,1 4,7 7,3 1,8 2,0 0, ,86 TAC-C 100LA ,0 0,64 2,5 5,0 9,8 1,8 2,0 0, ,27 TAC-C 100LB ,5 0,65 3,6 5,0 14,4 1,8 2,0 0, ,73 TAC-C 112M ,0 0,69 4,4 5,0 19,4 1,8 2,0 0, ,53 TAC-C 132S ,0 0,71 5,8 5,5 28,1 1,8 2,0 0, ,45 TAC-C 132M ,0 0,77 7,3 5,5 38,3 1,8 2,0 0, ,6 TAC-C 160MA ,0 0,76 9,0 5,5 50,8 2,1 2,5 0, ,33 TAC-C 160MB ,9 0,76 12,7 5,5 69,8 2,1 2,5 0, ,6 TAC-C 160L ,5 0,77 16,9 5,5 94,9 2,1 2,5 0, ,7 TAC-C 180L ,0 0,78 24,9 5, ,0 2,8 0, ,3 TAC-C 200L ,0 0,78 32,7 5, ,3 2,8 0, ,3 TAC-C 225S ,0 0,75 41,4 5, ,1 2,8 0, ,3 TAC-C 225M ,5 0,76 48,3 6, ,2 2,8 0, ,5 TAC-C 250M ,1 0,80 61,5 6, ,3 2,6 0, ,6 TAC-C 280S ,8 0,80 76,1 6, ,1 2,6 1, ,8 TAC-C 280M ,4 0, , ,1 2,7 1, TAC-C 315S ,2 0, , ,8 2,0 3, TAC-C 315M ,5 0, , ,8 2,0 4, TAC-C 315LA ,0 0, , ,8 2,0 5, TAC-C 315LB ,5 0, , ,8 2,0 6, TAC-C 355 MA , , ,8 2,0 7, TAC-C 355 MB ,8 0, , ,8 2 10, TAC-C 355 L ,9 0,84 362,1 6, ,8 2 12, Sound pressure level Lp db(a)

10 Dimension drawing, H71-355, B3 TAC-C Pole A AA AB AC B BB C D E F G GD DB EG , j M5 12, j ,5 6 M S j M L j M L j M M j M S k M M k M M k M L k M M k ,5 9 M L k ,5 9 M L m M S m M M m M M m M M m M M m M S m M S m ,5 12 M M m M M m ,5 12 M S M M S m M M m M M m M L m M L m M M m M M m M L m M L m M

11 Dimension drawing, H71-355, B5-B35 TAC-C Pole H HA HD K L LD LA M N P S T , ,5 90S ,5 90L ,5 100L M S M M L M L L S M M M M S S M M S S M M L L M M L L

12 Dimension drawing, B14-B34 TAC- C Pole A AA AB AC B BB C D E F G GD DB EG H HA HD K L LD AD , M5 12, ,5 6 M S M L M L M M M Size P M N S T C M6 2,5 C M6 3 C M8 3 C M8 3 C M8 3,5 C M8 3,5 12

13 Efficiency Typical efficiency values are given for part load in the table here under. Efficiency (%) 2-4 Poles 6-8 Poles xpn xpn xpn xpn xpn xpn xpn xpn xpn xpn Power factor values Typical power factor values for part load are given in the table above Power factor cos j 2-4 Poles 6-8 Poles xpn xpn xpn xpn xpn xpn xpn xpn xpn xpn

14 Options Options Motor size Balancing Balancing to grade B (IEC ) M M M M M Bearings and lubrication Roller bearing at D-en M M Cold resistant grease M M M M M Heat resistant grease M M M M M Regreasable bearings NA NA NA M( ) S( ) 2RS bearing at both ends S S S S ( ) SPM nipples NA NA R M M Agressive environment Stainless steel/acid proof bolts M M M M M Reinforced tropicalisation M M M M M Terminal box Terminal box right or left hand side view from D-end P P P P P Cooling system Unidirectional fan, clockwise seen from D-end R R R R R Unidirectional fan, counter clockwise seen from D-end R R R R R Aluminium fan R R R R R Cooling method IC418(without fan) R R R R R Separate motor cooling fan (fan axial, N-end) M M M M M Drain holes Modified drain hole position (for specified IM xxxx) M M M M M Drain holes with plugs M M M M M Earthing bolt External earthing bolt M M M M M Mounting arrangements IM2101 foot/flange mounted, IEC flange, from IMI1001(B34 from B3) M(71-160) NA( ) IM2001 foot/flange mounted, IEC flange,from IMI1001(B35 from B3) M M M M M IM3601 flange mounted, IEC flange, from IMI3001(B14 fom B5) M(71-160) NA( ) IM3001 flange mounted, IEC flange, from IMI3601(B5 from B14) M(71-160) NA( ) Paint Special paint colour, standard grade M M M M M Stator winding temperature sensors Bimetal detector, in stator winding M M M M M PTC-thermister, in stator winding S S S S S PT100 resistance element, in stator winding M M M M M Shaft & rotor One or two special shaft extensions, std shaft material R(71-250) P( ) Protection Protective roof, vertical motor, shaft down M M M M M IPW55 NA P(90-250) NA( ) Degree of protection IP56 R R R R R Heating element Heating element, V M M M M M Insulation system Winding insulation class H R R R R R Special winding insulation for frequency converter supply R R R R R 14

15 TAC-C cast iron motors basic design Motor size Stator Material Cast iron HT150GB/T9439 Paint colour Blue, Munsell 8B 4,5/3,25/NCS 4822 B05G Paint thickness Two-pack 821 Acid Polyurethane Enamel, thickness >60 um Bearing Material Cast iron HT150 GB/T9439 end Paint colour Blue, Munsell 8B 4,5/3,25/NCS 4822 B05G shields Paint thickness Two-pack 821 Acid Polyurethane Enamel, thickness >60 um D-end 2 pole Bearings 4 to 8 pole 2RSC3 2RSC3 2RSC3 2RSC3 2RSC3 2RSC3 2RSC3 N-end 2 pole to 8 pole 2RSC3 2RSC3 2RSC3 2RSC3 2RSC3 2RSC3 2RSC3 Axially-locked bearings Spring ring As standard, locked at D-end Lubrication Greased for life Rating plate Material Stainless steel Terminal box Frame material Cast iron HT 150 GB/T9439 Cover material Cast iron HT 150 GB/T9439 Connections Cable entries 2-M16X1,5 2-M25X1,5 2-M25X1,5 2-M25X1,5 2-M32X1,5 2-M32X1,5 2-M40X1,5 1-M12x1,5 1-M12x1,5 1-M12x1,5 1-M16x1,5 1-M16x1,5 1-M16x1,5 1-M16x1,5 Terminals 6 terminals for connection Fan Material Reinforced glass fiber Fan cover Material Steel Paint colour Blue, Munsell 8B 4,5/3,25/NCS 4822 B05G Paint thickness Two-pack 821 Acid Polyurethane Enamel, thickness >60 um Stator winding Material Copper Insulation insulation class F Winding protection On request Rotor winding Material Pressure die-cast aluminium Balancing method Half key balancing as standard Key ways Open key way Enclosure IP 55 Cooling method IC

16 TAC-C cast iron motors basic design Motor size Material Cast iron HT 150 GB/T9439 Cast iron HT200 GB/T9439 except vertical-mounted Paint colour Blue, Munsell 8B 4,5/3,25 NCS 4822 B05G Paint thickness Two-pack 821 Acid Polyurethane Lacquer Enamel, thickness > 60 um End shields Material Cast iron HT 150 GB/T9439 Cast iron HT200 GB/T9439 except vertical-mounted Paint colour Blue, Munsell 8B 4,5/3,25 NCS 4822 B05G Paint thickness Two-pack 821 Acid Polyurethane Enamel thickness > 60 um Bearings D-end 2 pole RSC RSC3 6312C3 6313C3 6314C3 6317C3 6319C3 4 to 8 pole RSC RSC3 6313C3 6314C3 6317C3 N319 N322 N-end 2 pole C3 6313C3 6314C3 6317C3 6319C3 4 to 8 pole 2RSC3 2RSC3 6312C3 6313C3 6314C3 6319C3 6322C3 Axially-locked Inner bearing cover bearing As standard Locked at ND-end Lubrication Greased for life or regreasable Regreasable bearings Rating Material Stainless steel Terminal box Frame material Cast iron HT 150 GB/T9439 Cast iron HT200 GB/T9439 Cover material Cast iron HT 150 GB/T9439 Cast iron HT200 GB/T9439 Connections Cable entries 2-M40X1,5 2-M50X1,5 2-M50X1,5 2-M63X1,5 2-M63X1,5 2-M63X1,5 2-M63x1,5 1-M16X1,5 1-M16X1,5 1-M20X1,5 1-M20X1,5 1-M20X1,5 2-M20X1,5 1-M20x1,5 Terminals 6 terminals for connection Fan Material Reinforced glass fiber Reinforced glass fiber or aluminium Fan cover Material Steel Paint colour Blue, Munsell 8B 4,5/3,25 NCS 4822 B05G Paint thickness Two-pack 821 Acid Polyurethane Lacquer Enamel thickness > 60 um Stator Winding Material Copper Insulation Insulation class F Winding protection On request 3 PTC thermistors as standard Rotor winding Material Pressure die-cast aluminium Balancing method Half key balancing as standard Key way Open key way Enclosure IP 55 Cooling method IC 411 T-T Electric reserves the righ to change the design, technical specification and dimensions without prior notice. 16

17 Name plate 3~ motor TAC-C 90 L2 EFF 2 N S1 IP 55 Ins. CL F IEC 34-1 V Hz kw r/min A Cos ᵠ 230 D 50 2, ,85 0, D 60 2, ,21 0, Y 50 2, ,53 0,85 Y 3~ motor TAC-C 250 M4 EFF 2 N S1 IP 55 Ins. CL F IEC 34-1 V Hz kw r/min A Cos ᵠ 400 D 50 5, ,5 0, D 60 5, ,70 0, Y 50 5, ,10 0,87 Y Mounting arrangements (H71-355) (H71-160) (H71-160) (H71-160) (H71-160) (H71-160) (H71-280) (H71-355) (H71-160) (H71-355) (H71-160) (H71-160) (H71-112) (H71-112) (H71-112) (H71-112) (H71-112) (H71-112) 17

18 Founded over 100 years ago, T-T Electric is a world-class supplier of top-quality industrial electric motors and drives. Pioneers in the industry, we are an experienced and established manufacturer of a comprehensive and cost-effective range of highly reliable drive products. They are used around the world in the toughest of application environments and in all industrial segments. Driven by customer demand, T-T Electric is continually researching product excellence and manufacturing process perfection. The flexible product design ensures easy adaptations to customer requirements. This, combined with unequalled short delivery times, make T-T Electric a reference within industry. Our extensive support services include diagnostics and maintenance on site as well as full overhaul in our own repair facilities. T-T Electric is committed to a working partnership with our customers. For mutual benefit, we focus on complete and innovative solutions together. Denmark T-T Electric Svendborgvej Odense S Tel: UK T-T Electric Unit 7A Waterloo Park Upper Brook Street STOCKPORT SK1 3BP Tel: +44 (0) Fax:+44 (0) Germany T-T Electric Helgolandstrasse 67 D Stuttgart Tel: +49 (0) Fax: +49 (0) Sweden Thrige Electric Lefflersgatan 1 PO Box 1641 S Uppsala Tel: +46 (0) Fax: +46 (0) France T-T Electric 22 rue du 8 mai 1945 F PERSAN Tel: +33 (0) Fax: +33 (0) t-telectric.com

Drive IT Low Voltage Cast Iron Motors. M2000 Range

Drive IT Low Voltage Cast Iron Motors. M2000 Range Drive IT Low Voltage Cast Iron Motors M2000 Range Making you more competitive ABB has been manufacturing motors for over 100 years. Our products are designed to be reliable, efficient and cost effective,

More information

M3000 Motors for Hazardous Areas. Low Voltage Non-sparking Motors Ex na, EEx na

M3000 Motors for Hazardous Areas. Low Voltage Non-sparking Motors Ex na, EEx na M3000 Motors for Hazardous Areas Low Voltage Non-sparking Motors Ex na, EEx na Non-sparking EEx na, Ex na, Ex N Range Standards Frame Size Output range Non-sparking Ex na IEC 60079-15 aluminium 90-250

More information

IEC Low Voltage Induction Motors 400 V 50 Hz. Motors for all applications

IEC Low Voltage Induction Motors 400 V 50 Hz. Motors for all applications IEC Low Voltage Induction Motors 400 V 50 Hz Motors for all applications Making you more competitive ABB has been manufacturing motors for over 100 years. Our products are designed to be reliable, effi

More information

M3000 Steel Motors. ABB LV Motors M3000 Range

M3000 Steel Motors. ABB LV Motors M3000 Range M3000 Steel Motors ABB LV Motors M3000 Range Making you more Competitive ABB LV Motors knows about customer needs. For over 100 years we have been designing motors for every need and application. With

More information

IEC Low Voltage Induction Motors 460 V 60 Hz. Motors for all applications

IEC Low Voltage Induction Motors 460 V 60 Hz. Motors for all applications IEC Low Voltage Induction Motors 460 V 60 Hz Motors for all applications Making you more competitive ABB has been manufacturing motors for over 100 years. Our products are designed to be reliable, effi

More information

Explosion and flame-proof cast iron electric motors

Explosion and flame-proof cast iron electric motors Explosion and flame-proof cast iron electric motors EEx-d, EEx-de, IIB, IIC II, 2G IP55 II, 2G&D IP66 T4, T5, T6 Frame size 56 to 160 3 phases Voltage 230/400 V 50Hz Voltage 265/460V 60Hz Types of mounting

More information

Drive IT Low Voltage General Purpose Motors

Drive IT Low Voltage General Purpose Motors Drive IT Low Voltage General Purpose Motors Making you more competitive ABB s General purpose motors are readily available from central stock locations and distributors throughout the world. While designed

More information

Low-voltage motors up to 315kW. 1LG0 Low-voltage Motors. Answers for industry.

Low-voltage motors up to 315kW. 1LG0 Low-voltage Motors. Answers for industry. Low-voltage motors up to 315kW 1LG0 Low-voltage Motors Answers for industry. 1 Low-voltage squirrel-cage motors 4 Motor standard 4 Standard 5 Condition 5 Mechanical design 5 High quality performance 5

More information

Low Voltage General Purpose Motors

Low Voltage General Purpose Motors Low Voltage General Purpose Motors Making you more competitive ABB s General purpose motor is designed for use in general industry, meeting the demands of standard applications for OEM's. Motors are readily

More information

General Purpose Cast Iron Motors

General Purpose Cast Iron Motors General Purpose Cast Iron Motors Totally enclosed squirrel cage three phase low voltage motors, Sizes 71-355, 0.25 to 250 kw www.abb.com/motors&drives > Motors > Low voltage motors > General purpose motors

More information

Drive IT Low Voltage General Purpose Motors

Drive IT Low Voltage General Purpose Motors Drive IT Low Voltage General Purpose Motors Making you more competitive ABB s General purpose motors are readily available from central stock locations and distributors throughout the world. While designed

More information

LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES

LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES FRAMES 355 560 355kW 1500kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in

More information

ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame. Australian Version October 2013

ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame. Australian Version October 2013 ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame Australian Version October 2013 ODP SERIES (OPEN DRIP PROOF) PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS, C280M TO C355LB FRAME

More information

Explosion and flame-proof single phase electric motors

Explosion and flame-proof single phase electric motors Explosion and flame-proof single phase electric motors EEx-d, EEx-de, IIB, IIC II, 2G IP55 II, 2G&D IP66 T4, T5, T6 Frame size 56 to 112 Single phase Voltage 230 50Hz Voltage 265 60Hz Types of mounting

More information

Drive IT Low Voltage General Purpose Motors

Drive IT Low Voltage General Purpose Motors Drive IT Low Voltage General Purpose Motors Making you more competitive ABB s General purpose motors are readily available from central stock locations and distributors throughout the world. While designed

More information

Drive IT Low Voltage General Purpose Motors

Drive IT Low Voltage General Purpose Motors Drive IT Low Voltage General Purpose Motors Making you more competitive ABB s General purpose motors are readily available from central stock locations and distributors throughout the world. While designed

More information

ARAGON MOTO R S. Three Phase Induction Motors

ARAGON MOTO R S. Three Phase Induction Motors ARAGON MOTO R S Three Phase Induction Motors Introduction PEM series motors are defined as totally enclosed, fancooled, squirrel cage type and noted for their novel design, beautiful modelling, compact

More information

PLS Open Drip Proof three-phase asynchronous motors. General information

PLS Open Drip Proof three-phase asynchronous motors. General information General information Open Drip Proof three-phase asynchronous motors, series PLS, according to IEC 60034, 60066, 60072 power 7,5 kw to 900 kw, frame size 160 to 400 mm, 2, 4, 6 and 8 ; 230/400 V or 400

More information

CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm

CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm 95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide

More information

Technical Documentation

Technical Documentation Technical Documentation LOW VOLTAGE THREE PHASE TEFC CAGE MOTORS IE315EN Mission, Vision, Targets Our electric motors and generators are optimized in accordance with our client's technical and economical

More information

Series E4F E5F

Series E4F E5F Three Phase Induction Motors With Rotors Wound for Hoists Series E4F 160-315 E5F 355-400 ASI NT 003.1 I N D E X Use 2 Electrical Tolerances 9 Mechanical Tolerances 9 General Characteristics 2 Technical

More information

Three-phase low voltage squirrel cage motors. Type DOR Frame sizes Helmke Plus

Three-phase low voltage squirrel cage motors. Type DOR Frame sizes Helmke Plus Type DOR...-145 Frame sizes 63-400 Helmke Plus Series HELMKE PLUS Description of product Construction forms acc. to IEC Advantages of our motors Standards and regulations Design versions Cooling and ventilation

More information

Three-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC.

Three-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC. Three-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC Product summary VEM motors GmbH Introduction Roller table motors are

More information

M3000 motors. Industrial IT

M3000 motors. Industrial IT Making you more competitive ABB has been manufacturing motors for over 100 years. Our products are designed to be reliable, efficient and cost effective, and we can supply motors for practically any application.

More information

THREE PHASE ASYNCHRONOUS MOTORS. MS/S Series (frame Aluminum) TC Series (frame Cast iron) Y Series (frame Cast iron)

THREE PHASE ASYNCHRONOUS MOTORS. MS/S Series (frame Aluminum) TC Series (frame Cast iron) Y Series (frame Cast iron) THREE PHASE ASYNCHRONOUS MOTORS MS/S Series (frame 56-200 Aluminum) TC Series (frame 160-355 Cast iron) Y Series (frame 132-355 Cast iron) INDICE 01. General features p.03 02. Standards p.04 03. Mounting

More information

IP66 GSW GEAR BOX MOTOR SERIES

IP66 GSW GEAR BOX MOTOR SERIES IP66 GSW GEAR BOX MOTOR SERIES Three Phase Aluminium Gear Box Motors Australian Version October 2013 CONTENTS INTRODUCTION Pg 3 MATERIALS AND CONSTRUCTION Pg 3-4 SERIES OVERVIEW Pg 5 PERFORMANCE DATA Pg

More information

MG Model C & D 3 phase kw

MG Model C & D 3 phase kw GRUNDFOS MOTORS MG Model C & D 3 phase 0.25-11 kw Grundfos motors in a of their own Grundfos is one of the world s leading manufacturers of pumps and pumping equipment. Therefore, highquality electrical

More information

THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS ACCORDING IEC

THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS ACCORDING IEC THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS ACCORDING IEC 60034-30 1st EDITION IE1/IE2-MS IE1/IE2-EG Series IE1 Standard efficiency IE2 High efficiency THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS

More information

Catalog June 2016 Low voltage General performance motors

Catalog June 2016 Low voltage General performance motors Catalog June 2016 Low voltage General performance motors With expertise, and a comprehensive portfolio of products and life-cycle services, we help value-minded industrial customers improve their energy

More information

MAX-VH. Vertical Hollow Shaft Motors

MAX-VH. Vertical Hollow Shaft Motors MAX-VH Vertical Hollow Shaft Motors Specifications OTHER PERFORMANCE CONSTRUCTION APPLICATION RATING Item Type Of Motors Design Standards Voltages Frequency Output Range RPM (SYN.) Time Duty Frame Size

More information

High-voltage motors TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION

High-voltage motors TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION High-voltage motors series TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION series : Combining over 00 years experience with innovative new technology makes the series the right choice for the

More information

Basic Motor Technology ABB Motors

Basic Motor Technology ABB Motors Basic Motor Technology ABB Motors ABB Motors 1 Basic Motor Technology for ABB Motors' totally enclosed, fan cooled, threephase squirrel cage motors. This catalogue includes basic technical information

More information

HAIE2 -Efficiency and reliability for industry

HAIE2 -Efficiency and reliability for industry HAIE2 -Efficiency and reliability for industry High performance with energy efficiency, this is the meaning of the new CAG electric motor. Low cost and best quality and long lifetime have been the basis

More information

Permanent-magnet synchronous motors

Permanent-magnet synchronous motors Permanent-magnet synchronous motors Contents Product description 12/2 Overview of technical data 12/4 Motor selection data Series PE.. for Super Premium Efficiency IE4 1) 12/5 Series P, high-power motors

More information

BA series - brake motors. for wind turbine generators

BA series - brake motors. for wind turbine generators series brake motors for wind turbine generators general information on MGM brake motors MGM brake motors are asynchronous three phase totally enclosed fan cooled motors. In case of power failure motors

More information

Catalog January 2017 Standard low voltage motors Regional catalog for Middle-East and Africa

Catalog January 2017 Standard low voltage motors Regional catalog for Middle-East and Africa Catalog January 2017 Standard low voltage motors Regional catalog for Middle-East and Africa With expertise, and a comprehensive portfolio of products and life-cycle services, we help value-minded industrial

More information

Severe Duty is Standard with WEG W22 motors

Severe Duty is Standard with WEG W22 motors W22 Severe Duty TEFC Severe Duty is Standard with WEG W22 motors W22 Severe Duty TEFC Severe Duty High performance with maximum energy efficiency is the goal of the new WEG electric motor. High efficiency

More information

Electric Motors. IE3 Motors. hoyermotors.com. IE3 Motors

Electric Motors. IE3 Motors. hoyermotors.com. IE3 Motors Electric Motors IE3 Motors hoyermotors.com IE3 Motors Behind Hoyer Motors Svend Hoyer A/S is an international company comprising the two business units Hoyer Motors and Hoyer Transmissions. Headquartered

More information

Three Phase Squirrel Cage Induction Motors

Three Phase Squirrel Cage Induction Motors Three Phase Squirrel Cage Induction Motors A5 - B5 SERIES 160-500 SIZES LOW AND HIGH VOLTAGE INDUSTRIAL APPLICATIONS ASI.CT.045.0 GB your partner in power technology INDEX Pag. PRODUCT CODE STRUCTURE 2

More information

ASYNCHRONOUS MOTORS THREE-PHASE MOTORS SINGLE-PHASE MOTORS BRAKE MOTORS INSTRUCCIONES DE SERVICIO OPERATING INSTRUCTIONS 2016

ASYNCHRONOUS MOTORS THREE-PHASE MOTORS SINGLE-PHASE MOTORS BRAKE MOTORS INSTRUCCIONES DE SERVICIO OPERATING INSTRUCTIONS 2016 ASYNCHRONOUS INSTRUCCIONES DE SERVICIO MOTORS THREE-PHASE MOTORS SINGLE-PHASE MOTORS BRAKE MOTORS OPERATING INSTRUCTIONS 2016 3006/16 en Ed.02.2016 Read these Operating Instructions before you transport,

More information

INTER PLANT STANDARD STEEL INDUSTRY. Corresponding IS does not exist

INTER PLANT STANDARD STEEL INDUSTRY. Corresponding IS does not exist INTER PLANT STANDARD STEEL INDUSTRY IPSS SPECIFICATION FOR ac ROLLER TABLE MOTORS (Second Revision) Corresponding IS does not exist IPSS:1-03-007-14 Formerly : IPSS:1-03-007-03 0. FOREWORD 0.1 This Inter

More information

STANDARD VERSION OF HIGH VOLTAGE MOTORS

STANDARD VERSION OF HIGH VOLTAGE MOTORS AUSTRIA STANDARD VERSION OF HIGH VOLTAGE MOTORS The following pages contains the three phase squirrel cage high voltage induction motors in three different versions. a) Open drip-proof IP23 motors SCf

More information

XPA series motors High Specification / Premium High Efficiency

XPA series motors High Specification / Premium High Efficiency 60 Years Proudly manufacturing since 1948 XPA series motors High Specification / Premium High Efficiency Accreditation No. 14396 Solutions, not just products. Specialists in Electric Motors, Geared Motors

More information

M3000 Marine Motors. ABB LV Motors M3000 Range

M3000 Marine Motors. ABB LV Motors M3000 Range M3000 Marine Motors ABB LV Motors M3000 Range Making you more Competitive ABB LV Motors knows about customer needs. For over 100 years we have been designing motors for every need and application. With

More information

Low Voltage 3-Phase Induction Motors. Range 0.18kW to 670kW

Low Voltage 3-Phase Induction Motors. Range 0.18kW to 670kW Low Voltage 3-Phase Induction Motors Range 0.18kW to 670kW Totally Enclosed Fan-Cooled Cast Iron Frame Series Contents page page PRODUCT DETAILS General Information 2 Electrical Design and Standards Altitude

More information

LSES high efficiency three-phase asynchronous motors General information

LSES high efficiency three-phase asynchronous motors General information General information Efficiency class IE2 Totally enclosed three-phase powersaving asynchronous motors, LSES series, according to IEC 60034, 60038, 60072 ; power 0.75 to 200 kw, frame size 80 to 315 mm.

More information

Datasheet. Pitch Motor PMSM SP260B8

Datasheet. Pitch Motor PMSM SP260B8 Pitch Motor PMSM SP260B8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260012a 1 Application The Pitch motor

More information

Process performance IE3 aluminum motors, 50/60 Hz The product range for global customers

Process performance IE3 aluminum motors, 50/60 Hz The product range for global customers PRODUCT NOTE Process performance IE3 aluminum motors, 50/60 Hz The product range for global customers BB offers its premium aluminum motor range in frame sizes 80-250 that meets the need of the global

More information

Specification. ATB has a long-standing reputation for efficient customer service, supporting customers through its global network.

Specification. ATB has a long-standing reputation for efficient customer service, supporting customers through its global network. ATB ECODRIVE Specification Specification Frame material Enclosure Mounting option Terminal box position Voltage Frequency Cooling Bearing location Lubrication Insulation Temperature rise Paint colour Thermal

More information

DYNEO VARIABLE SPEED DRIVES Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors

DYNEO VARIABLE SPEED DRIVES Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet synchronous motors Unidrive SP variable speed drives LSRPM - PLSRPM permanent magnet 0.75 kw to 400 kw Technical catalogue 4936 en - 2012.10 / b Rectifier Simplicity Performance Install and start using your system quickly

More information

VEM motors Thurm GmbH

VEM motors Thurm GmbH VEM motors Thurm GmbH Installation, Operating and Maintenance Instructions Single-Phase Squirrel-Cage Induction Motors, Standard Version March 2005 1. General To avoid damage to the motors and equipment

More information

Keeping Industry Turning

Keeping Industry Turning Keeping Industry Turning W luminium motors Frame sizes 3 to 01E issue 3 Specification and Introduction Specification Specification Frame sizes Enclosure Mounting option Terminal box position Voltage Frequency

More information

M2000 Aluminium Motors

M2000 Aluminium Motors M2000 Aluminium Motors ABB LV Motors M2000 Range ABB Automation Making you more competitive ABB LV Motors knows about customer needs. For over 100 years we have been designing motors for every need and

More information

Catalog March 2016 Low voltage Process performance motors

Catalog March 2016 Low voltage Process performance motors Catalog March 2016 Low voltage Process performance motors With expertise, and a comprehensive portfolio of products and life-cycle services, we help value-minded industrial customers improve their energy

More information

Asynchronous generators

Asynchronous generators Asynchronous generators Contents Product description 13/2 Overview of technical data 13/3 Motor selection data Series G4.R on the basis of Premium Efficiency IE3 13/4 Series GE.R on the basis of High Efficiency

More information

Low-Voltage Motors N-compact Standardline Operation on supply system

Low-Voltage Motors N-compact Standardline Operation on supply system Low-Voltage Motors N-compact Standardline Operation on supply system 2 2/2 Overview 2/2 Benefits 2/2 Technical specifications 2/2 Selection and Ordering Data 2/ Options 2/ Dimensional drawings 2/4 More

More information

W22 Three-Phase Electric Motor

W22 Three-Phase Electric Motor Motors Automation Energy Transmission & Distribution Coatings W22 Three-Phase Electric Motor Technical Catalogue European Market W22 Line - High Efficiency Motors The increasing demand for electrical energy

More information

M O T O R S. T E C Electric Motors Ltd.

M O T O R S. T E C Electric Motors Ltd. M O T O R S T E C Electric Motors Ltd. GENERAL INFORMATION THREE PHASE-TECA/TECC TYPES-IE1/IE SINGLE PHASE-TPC/TCC TYPES BRAKE MOTOR-TECA-BM TYPE THREE PHASE MOTORS ECOL-IE1/IE/IE3 TEC motors are designed

More information

REEL SuPremE The IE5* magnet-free synchronous reluctance motor

REEL SuPremE The IE5* magnet-free synchronous reluctance motor High Efficiency Drives REEL SuPremE The IE5* magnet-free synchronous reluctance motor *IE5 acc. to IEC/TS 60034-30-2 up to 15 kw @ 1500 rpm / 18.5 kw @ 3000 rpm (only for 1500 rpm types rated 0.55 kw,

More information

Cast resin transformers

Cast resin transformers Product catalogue Cast resin transformers according to IEC/EN 60076, VDE 0532, DIN 42523 Power range up to 8 MVA Voltage range up to 36 kv Conductor material: copper or aluminum Protection types: IP 00

More information

ABB Oy MV Induction Machines

ABB Oy MV Induction Machines PIE / J.Suihkonen 3.7.28 En 2..28 448HF3 45534397 82B B: J.Suihkonen /4 Driven Motor: Compressor Motor type code HXR 5LJ2 Motor type Squirrel cage motor Type of Ex-protection Ex na II T3X Mounting designation

More information

Enclosed three-phase asynchronous motors driven by electronic drive LSMV General information

Enclosed three-phase asynchronous motors driven by electronic drive LSMV General information General information Enclosed 3-phase asynchronous motors, series, according to IEC 60034, 60072. motor is the result of Leroy-Somer s experience with speed variation and progress in performance of new

More information

Three-phase motors for marine use

Three-phase motors for marine use Three-phase motors for marine use Contents Product description 11/2 Overview of technical data 11/7 Series K.../W4.. for Premium Efficiency IE3 11/8 Series K.../WE.. for High Efficiency IE2 11/12 Series

More information

Induction motors for smoke extraction. LSHT - Aluminium frame FLSHT - Cast iron frame

Induction motors for smoke extraction. LSHT - Aluminium frame FLSHT - Cast iron frame Induction motors for smoke extraction LSHT - Aluminium frame FLSHT - Cast iron frame LSHT - FLSHT Contents GENERAL INFORMATION Introduction... 5 Quality commitment... 6 Certification... 7-8 Designation...

More information

ECO-TOP POWER. GENERAL CATALOGUE english. electric motors. rev. 20

ECO-TOP POWER. GENERAL CATALOGUE english. electric motors. rev. 20 ECO-TOP POWER electric motors GENERAL CATALOGUE english rev. 20 electric motors warehouse sm 5120 1 3 warehouse sm 4720 warehouse sm 730 2 THE LARGEST JUST IN TIME STOCK IN EUROPE A GREAT VALUE CREATING

More information

Contents. Identification

Contents. Identification Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions

More information

General Purpose Energy Efficient Induction Motors series 2SIE

General Purpose Energy Efficient Induction Motors series 2SIE General Purpose Energy Efficient Induction Motors series 2SIE Comply with the new efficiency classes for low-voltage three-phase motors IEC 60034-30 standard and EU Regulation 640/2009 Product Catalogue

More information

IE2 and IE3 THREE PHASE ASYNCHRONOUS ELECTRIC MOTORS PRODUCT CATALOGUE ELK

IE2 and IE3 THREE PHASE ASYNCHRONOUS ELECTRIC MOTORS PRODUCT CATALOGUE ELK IE2 and IE3 THREE PHASE ASYNCHRONOUS ELECTRIC MOTORS PRODUCT CATALOGUE ELK 000-0616 PRODUCTION SITE AND PRODUCTION TECHNOLOGY ELK Motor has been founded by major shareholders of Yılmaz Redüktör A.Ş. as

More information

IP23 MOTORS CATALOGUE IP23 ELEKTROMOTOREN KATALOG

IP23 MOTORS CATALOGUE IP23 ELEKTROMOTOREN KATALOG IP23 MOTORS CTLOGUE IP23 ELEKTROMOTOREN KTLOG OMD IE3 CST IRON OMD IE3 FETURES Cast iron three-phase squirrel cage induction motors class IE3 according IEC 60034-30 Voltage 400/690V 50Hz 690/1195V 50Hz

More information

TechTop T1A IE1 - ALUMINIUM Industry pricelist Price list validity from (This price list replaces all previous published price lists)

TechTop T1A IE1 - ALUMINIUM Industry pricelist Price list validity from (This price list replaces all previous published price lists) TechTop T1A IE1 - ALUMINIUM pricelist list validity from 01-05-2017 Indumex artikelnr: 4521 4541 4561 3000 rpm 2-pole IE1 T1A 63-1 0,18 54 0,12 52 0,09 55 T1A 63-2 0,25 56 0,18 56 0,12 57 T1A 63-3 0,37

More information

Table of contents. Three-phase asynchronous motors DA

Table of contents. Three-phase asynchronous motors DA be in motion be in motion AC Asynchronous Motors DA 100-280 Table of contents 1. Three-phase asynchronous motor DA 100-280... 3 1.1. General technical data... 3 1.2. Ratings definition for ventilated

More information

Standard motors up to frame size 315 L

Standard motors up to frame size 315 L Siemens AG 008 Standard motors up to frame size 315 L / Orientation / Overview /4 Benefits /4 Application /5 Integration /7 Technical specifications /8 Selection and ordering data /9 More information /10

More information

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue

CENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey

More information

Technical catalogue customised MoToRS ThRee-PhaSe MoToRS Single-PhaSe MoToRS BRaKe MoToRS IE1

Technical catalogue customised MoToRS ThRee-PhaSe MoToRS Single-PhaSe MoToRS BRaKe MoToRS IE1 Technical catalogue 2012 customised MoToRS ThRee-PhaSe MoToRS Single-PhaSe MoToRS BRaKe MoToRS IE1 Technical catalogue 1043/12 CONTENTS General information 3 Product range 4 StandardS and regulations 10

More information

MVSI-TS. Split covers. Technical features

MVSI-TS. Split covers. Technical features MVSI-TS Split covers The MVSI-TS series, obtained directly from the MVSI series, is characterized by the split weight covers. The weight cover is divided into two halves that can be removed in a radial

More information

High Efficiency three-phase LV Motors

High Efficiency three-phase LV Motors High Efficiency three-phase LV Motors www.lafert.com 2011 TECHNICAL CATALOGUE CONTENTS General information 3 [ I] Product range 4 Standards and regulations 10 Conditions of installation 14 Mechanical design

More information

THREE PHASE & SINGLE PHASE INDUSTRIAL MOTORS. Arcelik IM en 16.0

THREE PHASE & SINGLE PHASE INDUSTRIAL MOTORS. Arcelik IM en 16.0 THREE PHASE & SINGLE PHASE INDUSTRIAL MOTORS Arcelik IM en 16.0 1 CERTIFICATE OF COMPLIANCE Certificate Number 20141022-E235514 Report Reference E235514-20030930 Issue Date 2014-OCTOBER-22 This is to certify

More information

THREE PHASE AND SINGLE PHASE ASYNCHRONOUS ELECTRIC MOTORS OPERATION AND MAINTENANCE BOOKLET Rev

THREE PHASE AND SINGLE PHASE ASYNCHRONOUS ELECTRIC MOTORS OPERATION AND MAINTENANCE BOOKLET Rev MORATTO S.R.L. Electrical Machinery I 31030 PERO DI BREDA (Treviso) Italy Via A Volta, 2 Tel. +390422904032 fax +39042290363 www. moratto.it - moratto@moratto.it THREE PHASE AND SINGLE PHASE ASYNCHRONOUS

More information

SIMOTICS HV and SIMOTICS TN Series H-compact

SIMOTICS HV and SIMOTICS TN Series H-compact SIMOTICS HV and SIMOTICS TN Series H-compact Maximum power, minimum size and highest reliability siemens.com/h-compact Answers for industry. Mighty power packs in the smallest space The latest generation

More information

Non-standard motors frame size 315 and above

Non-standard motors frame size 315 and above Siemens AG 2008 Non-standard motors frame size 15 and above /2 Orientation /2 Overview /2 Benefits / Application / Design /4 Technical specifications /11 Selection and ordering data /1 More information

More information

Powerful + Efficient + Reliable

Powerful + Efficient + Reliable 1 THRU 50HP NEMA 140T THRU 449T HIGH EFFICIENCY ISO9001 CERTIFIED Powerful + Efficient + Reliable TEFC CAST IRON FRAMES CLASS F INSULATED 1.15 SERVICE FACTOR OVER SIZED BEARINGS LOW-LOSS ELECTRICAL GRADE

More information

Product presentation CPT tech Jason Evershed, ABB Transformer Components, May 21st Dry-type transformers Innovative Technology

Product presentation CPT tech Jason Evershed, ABB Transformer Components, May 21st Dry-type transformers Innovative Technology Product presentation CPT tech Jason Evershed, ABB Transformer Components, May 21st 2014 Dry-type transformers Innovative Technology What is a dry transformer? ABB manufactures a transformer which does

More information

SERVO MOTORS BRUSHLESS SERVO MOTORS ATEX ZONE 2-22 OPERATING INSTRUCTIONS 2016

SERVO MOTORS BRUSHLESS SERVO MOTORS ATEX ZONE 2-22 OPERATING INSTRUCTIONS 2016 SERVO MOTORS BRUSHLESS SERVO MOTORS ATEX ZONE 2-22 OPERATING INSTRUCTIONS 2016 3010/16 en Ed.10.2016 Read these Operating Instructions before performing any transportation, installation, commissioning,

More information

Immersion Pumps PS and PSL ( Slurp Pump ) sealless

Immersion Pumps PS and PSL ( Slurp Pump ) sealless Immersion Pumps PS and PSL ( Slurp Pump ) sealless 1-6014-US Centrifugal pumps of metal for clean, polluted and viscous fluids Technical data Delivery rate Q max = 1250 l/min Delivery head H max = 105

More information

DC Motors LAK Catalogue-2009/10 E. LAK 2000 Serie kw 0,3-30 HP 4-75Nm. t-telectric.com

DC Motors LAK Catalogue-2009/10 E. LAK 2000 Serie kw 0,3-30 HP 4-75Nm. t-telectric.com DC Mtrs LAK 2080-2132 Catalgue-2009/10 E LAK 2000 Serie 080-132 0.4-22 kw 0,3-30 HP 4-75Nm t-telectric.cm List f cntents Intrductin... p. 4 Optins... Applicatin data... Bearing data... Output data... Dimensin

More information

SERVO MOTORS BRUSHLESS SERVO MOTORS OPERATING INSTRUCTIONS 2016

SERVO MOTORS BRUSHLESS SERVO MOTORS OPERATING INSTRUCTIONS 2016 SERVO MOTORS BRUSHLESS SERVO MOTORS OPERATING INSTRUCTIONS 2016 3009/16 en Ed.02.2016 Read these Operating Instructions before performing any transportation, installation, commissioning, maintenance or

More information

OLIVER ONLINE VOLTAGE REGULATION

OLIVER ONLINE VOLTAGE REGULATION CAST-RESIN TRANSFORMERS ACCORDING TO IEC/EN 60076, VDE 0532, DIN 42523, DIN EN 50541-1, EU NR. 548/2014 OLIVER ONLINE VOLTAGE REGULATION With Ruhstrat transformers you provide the right voltage for the

More information

Process Performance Motors. New Cast Iron Motors. Best in class

Process Performance Motors. New Cast Iron Motors. Best in class Process Performance Motors New Cast Iron Motors Best in class Low Voltage Process Performance Motors Best in class With the new Process performance motors ABB is ready to meet and exceed the future challenges

More information

Customised drive solutions

Customised drive solutions Customised drive solutions Electric motors & systems Drive components Services Introduction 03 Halm quality drive technology Over 50 years of experience in developing electric motors with asynchronous

More information

M3000 Motors for Process Industries. ABB Low Voltage Motors M3000 Range

M3000 Motors for Process Industries. ABB Low Voltage Motors M3000 Range M3000 Motors for Process Industries ABB Low Voltage Motors M3000 Range Making you more competitive ABB has been manufacturing motors for over 100 years. Our products are designed to be reliable, efficient

More information

(db) AT UNLOADED OPERATION ACCORDING TO IEC (db) AT RATED POWER OPERATION ACCORDING TO IEC

(db) AT UNLOADED OPERATION ACCORDING TO IEC (db) AT RATED POWER OPERATION ACCORDING TO IEC Volt Motors is a subsidiary of the Saya Group, a privately held Turkish conglomerate with interests in real estate development, tooling and molding, pharmaceuticals, mining and low-voltage industrial motor

More information

AIR CONDITIONING AIR COOLED CONDENSERS

AIR CONDITIONING AIR COOLED CONDENSERS Type No. STULZ # Serial Model # 08/15, 15-3334 A XY 443 123.667 A16 512BB c ur. 16 A 35 db(a) protected by Do federal not la w expose to any kind of m oisture or anything CONDENSERS 230V-50Hz-1Ph Index

More information

Lenze. Drives with worm gearboxes 52.

Lenze. Drives with worm gearboxes 52. 6 887 Lenze Drives with worm gearboxes 5. Lenze Drive Systems GmbH, Postfach 0 5, D-76 Hameln, Site: Groß Berkel, Hans-Lenze-Straße, D-855 Aerzen, Phone ++9 (0) 55 8-0, Telefax ++9 (0) 55 8- E-Mail: Lenze@Lenze.de

More information

W22 Three-Phase Electric Motor

W22 Three-Phase Electric Motor Motors Automation Energy Transmission & Distribution Coatings W22 Three-Phase Electric Motor NEMA Technical Catalog W22 Line The increasing demand for electrical energy to sustain global development requires

More information

Index. Cable Brakemotor cable for decentralized MOVI SWITCH Catalog AC Motors DR , DT56, DR /EN 10/14

Index. Cable Brakemotor cable for decentralized MOVI SWITCH Catalog AC Motors DR , DT56, DR /EN 10/14 Index A AC motors Mounting position designations... 89 Additional documentation... 12 Add-on encoder cables... 579, 585 Anti-condensation heating... 500 B Backstop... 471 BE brake technical data... 375

More information

Table of contents. Three-phase asynchronous motors DA

Table of contents. Three-phase asynchronous motors DA Table of contents 1. Three-phase asynchronous motor DA 100-280... 5 1.1. General technical data... 5 1.2. General safety instructions... 6 1.3. Definitions of power ratings... 7 1.3.1. Definitions of power

More information

Open continuous current (DC) motors LSK. General information

Open continuous current (DC) motors LSK. General information LSK General information LSK open continuous current (dc) motors frame size 112 to 355 mm, power 2 to 750 kw. Conditions of use According to the standard EC 34-1, the standard motors can operate in the

More information

A. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents.

A. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents. PART 1: GENERAL 1.01 This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to apply the

More information

1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide

1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide 1ZSE 2750-102 en, Rev. 7 Transformer bushings, type GOB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical

More information