CONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Technical Data 3.2 Standard Accessories 3.3 Tolerances

Size: px
Start display at page:

Download "CONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Technical Data 3.2 Standard Accessories 3.3 Tolerances"

Transcription

1

2 CONTENTS 1 GENERAL 2 STANDARDS 3 TECHNICAL FEATURES 3.1 Basic Technical Data 3.2 Standard Accessories 3.3 Tolerances 4 MOTOR DESIGN 4.1 Stator Casing 4.2 Stator Core with Winding 4.3 Stator Winding 4.4 Rotor Assembly 4.5 Bearings 4.6 Direction of Rotation 4.7 Main Terminal Box 4.8 Auxiliary Terminal Box 4.9 Additional Equipment 4.10 Heaters 4.11 Options 5 SPARE PARTS 6 TESTS 6.1 Testing programme - Routine Tests 6.2 Testing programme - Type Tests 7 ADDITIONAL PARTS 8 DOCUMENTATION 9 DESCRIPTION OF TYPE DESIGNATION 10 TECHNICAL DATA 11 OUTLINE DRAWINGS 12 QUESTIONNAIRE FOR TENDERING CAGE INDUCTION MOTORS

3 1 GENERAL This catalogue contains description and basic technical data of totally enclosed three-phase high-voltage squirrel-cage induction motors Series 6AJZ Series consists of eight frame sizes: 355, 400, 450, 500, 560, 630, 710 and 800 mm. KONÈAR high-voltage induction motors of Series 6AJZ excel in up-to-date design, high degree of efficiency, insulation class F in VPI technology and other technical properties which completely meet the requirements of electrical drives. 2 STANDARDS Motors are designed according to Croatian Standards HRN, IEC standards and to relevant standards VDE and DIN. On request, motors can also be constructed and tested according to other national standards,. 3 TECHNICAL FEATURES 3.1 Basic Design Data Ratings Voltage Starting Mode of operation Insulation system Class of insulation Temperature rise according to technical data 6000 V ± 5%, 50 Hz direct on line continuous, S1 for normal climate conditions, VPI technology F according to class F Ambient temperature -20 C up to +40 C Altitude up to 1000 m above sea level Noise level according to IEC 34-9 Degree of protection IP 54 Degree of protection of terminal boxes IP 55 Method of cooling IC 611 Type of construction IM 1001 and IM 3011 Bearings and bearing lubrication according to Table 2 Direction of rotation Vibration one according to the request group N for frames 335 and 400, 2.8 mm/s for frame 450 according to VDI 2056; ìgoodî for frames Standard Accessories HV terminal box Auxiliary terminal box Motor frame Resistance temperature detectors 3 terminals for line connection and one terminal for ground for frames : 13 terminals and one terminal for ground for frames : terminals and one terminal for ground 2 ground terminals Heaters according to Table 3 for frames : 3 pcs in windings for frames : 6 pcs in windings and 2 pcs in bearings Corrosive protection Paint finish for normal ambient conditions RAL 5010 based on alkyd paints

4 3.3 Tolerances Tolerances in Respect of Data In conformity with IEC 34-1 and VDE 0530 the tolerances are: for efficiency (η): -(1-η) / 10 for power factor (cosϕ) -(1- cosϕ) / 6, but no less than 0.02 and no more than 0.07 slip: ±20 % maximum : -10 %, but not less than 1.6 times rated starting : -15 % till +25 % starting : +20 % Fixing Dimensions Permissible tolerances to basic motor dimensions are given in Table 1. TABLE 1: Dimension Designation A, B PERMISSIBLE TOLERANCES OF FIXING DIMENSIONS Dimension Distance between center-lines of fixing holes up to 750 mm above 750 up to 1000 mm above 1000 mm Tolerances ±1.5 mm ±2 mm ±2.5 mm C Distance from shaft shoulder to center line of mounting holes in the nearest feet ±5 mm D Diameter of shaft extension m6 F Width of key-way h9 GA Distance from the top of the key to the for D 130 mm -0.2 mm opposite surface of the shaft extension for D > 130 mm -0.3 mm H Shaft height From 335 to 560 mm -1 mm Above 560 to 800 mm -1.5 mm K Diameter of fixing hole in the motor feet +3 % M Pitch circle diameter of fixing holes up to 1000 mm ±1 mm above 1000 mm ±2.5 mm N Diameter of spigot j6 S Diameters of holes in mounting flange +3%

5 4 MOTOR DESIGN 4.1 Stator Casing The stator casing is made of fabricated steel. Shape and dimensions are selected to ensure minimum vibrations and are designed to ensure easy transport and installation. 4.2 Stator Core with Winding The stator core is made of silicon steel sheet having low magnetic losses. Upon stacking and fixation of lamination on the appropriate device, the complete winding is inserted, fixed and connected. Afterwards, the core with winding is subjected to the manufacturing process of vacuum-pressure impregnation (VPI) to complete the insulating process. Upon the completion of the procedure, stator is inserted in the stator frame. 4.3 Stator Winding and Insulation Stator windings are constructed from copper rectangular wires. The wires are preinsulated with enamel varnish in combination with glass silk and varnish. The winding is of double layer type, made of individually shaped and continuously insulated coils. The basic materials are mica and epoxy resins. Prepared coils are continuously taped along the whole length with porous tapes on the basis of glass and mica paper. Such insulated and tested coils are inserted in the stator core, and then all the required connections and tests are carried out prior to vacuum pressure impregnation. The process of vacuum-pressure impregnation is followed by the stiffening process in furnace, tests and the insertion of the stator core with winding into the frame. Then the final tests are performed. The insulation system is of class F. It is moisture proof and it practically has no limitation with regard to climate conditions, salty atmosphere, acids and lies. By the mentioned insulation system, great mechanical strength of the winding ends has been obtained. There is no limitation to reversals at residual fields of any magnitude and phase angle. Item Part Material 1 Slot Wedge Hard Glass Fibre or Magnetic Material Reinforced with Glass Fibre 2 Wedge Filler Hard Glass Fibre 3 Conductor Copper Section insulated with Epoxy Varnish and Glass Silk 4 Compacting Layer Mica Tape impregnated with Epoxy Resin in B state 5 Main Insulation Porous Mica Tape 6 Corona Protection Graphite Tape 7 Intercoil Filler Mica Tape 8 Bottom Filler Polyester Strip 9 Corona Protecton Semiconducting Tape 10 Head Protection Glass Polyester Tape Fig. 1: Stator Coil

6 Item Part Item Part 1 Statorpack with windings 9 Covers 2 Rotorpack with cage 10 Shaft with ribs 3 Air deflectors 11 Ground terminal 4 Air to air heat exchanger 12 Heater 5 Radial fan 13 Frame 6 Bearing endshield NDE 14 Bearing assembly DE 7 Bearing assembly NDE 15 Axial fan 8 Fan cover 16 Bearing endshield DE Fig. 2: Assembly drawing

7 4.4 Rotor Assembly Rotor core is made of the same material as the stator core. Rotor cage is made of rectangular copper bars. Short circuiting rings, made of hard copper, are brazed to the bars by one shot process. The core is heated and pulled onto the shaft. Internal fans are installed and located and the external fan is fitted temporarily. The complete assembly is then dynamically balanced. For heavy duty starting, bars made of specially shaped bronze sections are fixed by springs in slots. This solution allows the free thermal expansion of the cage windings and a greater thermal capacity is obtained. 4.5 Bearings Grease lubricated rolling bearings or oil lubricated slide bearings as appropriate to speed and bearing loading are used. On horizontal motors of all sizes, oil lubricated slide bearings are an option. Normally, bearings are installed in bearing endshields. Rolling bearings are provided with grease nipple, grease drain box and grease regulator. Regreasing is possible during motor running. Calculated L10 bearing life is not less than 50,000 hours. Horizontal motor locating bearing is placed on DE. Vertical motor thrust bearing is placed on the top of the motor. Slide bearings are equipped with bearing shells spherical seated in the housing. Bearings are fitted with loose lubricating rings. Depending on speed of rotation and on bearings specific load, bearings are available either with natural cooling or with connections to a lubricating system. The bearing oil-ring maintains lubrication when forcefeed oil supply fails, allowing the motor to come safely to a standstill. Normally, slide bearings are non-locating bearings. To prevent oil vapor ingress into the motor enclosure, the inner side of bearing endshield is provided with additional motor seal. TABLE 2: Motor shaft height BEARINGS AND BEARINGS LUBRICATION Type of construction IM 1001 (IM B3) Type of construction IM 3011 (IM V1) Nos of Bearing Bearing poles Drive end Non drive end Drive end Non drive end lubrication lubrication C C C C C3 2 x 7322 BG Grease C C grease C C C3 2 x 7322 BG Grease C C C C C3 2 x 7324 BG Grease 2 sleeve sleeve oil NU 226 C C3 NU 226 C3 grease 6226 C3 2 x 7322 BG Grease 2 sleeve sleeve oil NU 230 C C3 NU 230C3 grease 6230 C3 2 x 7326 BG Grease 2 sleeve sleeve oil NU 234 C C3 NU 234 C3 grease 6234 C3 2 x 7330 BG Grease 2 sleeve sleeve oil NU 238 C C3 NU 238 C C3 2 x 7334 BG Grease 4 sleeve sleeve oil NU 244 C C3 NU 224 C3 grease - - Grease 4.6 Direction of Rotation Motors of all sizes are made for one direction of rotation, but on request, motors for both directions of rotation are available. Direction of rotation confirms to IEC Main Terminal Box Main terminal box for up to 400 A is constructed according to DIN It can be supplied with one, two or three cable glands for cable inlet with maximum OD of 76 mm. For higher, terminal box is generously dimensioned and it allows the connection of several parallel cables of all customary types and cross sections. On request, it is possible to supply motors with two terminal boxes and with terminals U1, U2, V1, V2, W1, W2 brought out in order to use differential protection. In this case, terminal boxes can be equipped with transformers. Terminal boxes are supplied with earthing terminals. The boxes have degree of protection IP 55.

8 Item Part Item Part 1 Connection Terminal M16 6 Ground Cable 2 Bushing 7 Cable Gland 3 Earth Terminal 8 Cable Support 4 Terminal Box Cover 9 Pressure Reliefe Membrane 5 Terminal Box Housing 10 Seal Adjustable to Cable OD Fig. 3: Main terminal box 4.8 Auxiliary Terminal Box All leads of auxiliary equipment, such as RTD's PT100 in windings and bearings, are brought out to block terminals in auxiliary terminal box. In a separate room there are terminal blocks for connection of space heaters. Auxiliary terminal box has IP 55 degree of protection. 4.9 Additional Equipment On request, conforming to drive requirements additional equipment can be installed on such as. additional resistance thermometers in winding resistance and/or contact thermometers in bearings resistance or contact thermometers for measuring the temperature of cooling air SPM nipples equipment for vibration monitoring equipment for speed measurement

9 4.10 Heaters In order to prevent the moisture condensation during the stillstand, air heaters are built in the interior of the motor. Heater terminals are situated in the auxiliary terminal box. Standard supply voltage is 230 V, 50 Hz, and on special request, for other voltages. Heater outputs for various sizes of motors are given in table Options TABLE 3: HEATER OUTPUTS Frame size (mm) Heater power (W) x x x x x x300 The following options can be derived from standard Series: motors for voltages from V motors for 60 Hz motors with number of poles greater than 12 motors for other forms, besides those stated in catalogue motors with reduced noise level motors for special applications motors according to other Standards 5 SPARE PARTS Spare parts that are optional extras: stator core with windings set of rolling bearings set of shells of sleeve bearings bushings of HV terminal box space heaters 6 TESTS The tests are performed in compliance with IEC standards and on special request according to other international and national standards. Beside Routine Tests carried out on each motor Type Tests are available upon special request and at extra charge. Depending on motor rating, voltage and number of pieces, Type Tests can be performed in factory test field and/or on site. Additional tests can be done on request. 6.1 Testing programme - Routine Test Check up of fixing dimensions Winding resistance Insulation resistance No-load test Short-circuit test up to rated Vibrations High voltage test Overspeed test Direction of rotation Bearings temperature Temperature protection Heaters Terminals marking

10 6.2 Testing programme -Type Tests No-load characteristics Short circuit characteristics Load characteristics Temperature rise test Insulation resistance-warm Moment of inertia Mass Torque and characteristics Noise level (no-load) Dielectric losses 7 ADDITIONAL PARTS On request the following parts can be ordered: Foundation blocks with fixing bolts Foundation plate with anchor bolts and fixing bolts Special tools 8 DOCUMENTATION Normally the following documents could be submitted: Technical Data sheet Outline Drawing Transport, storage, installation, maintenance manuals Test report On request other documentation can be submitted such as: Diagrams of motor characteristics Diagrams of foundation forces

11 9 DESCRIPTION OF TYPE DESIGNATION Type designation consists of group of letters and numbers whose meaning is determined by internal manufacturer's standard. The meaning of the type designation is obvious from the following example 6 A J Z - SERIES DESIGNATION 6AJZ ñ squirrel-cage totally-enclosed motor of series 6 VOLTAGE < U < 3300 V < U < 4400 V V < U < V < U < 5500 V < U < 6600 V SPECIAL DESIGN a - special design SHAFT HEIGHT 355, 400, 450, 500, 560, 630, 710, 800 FRAME VERSION S, M, L CORE LENGTH DESIGNATION 1, 2, 3 NUMBER OF POLES 2, 4, 6, Ö. Examples of designation: For the motor 900 kw, S1, 4 poles, 6000 V, 50 Hz, IP 54, IC 611, type designation is: 6AJZ6 500S1-4

12 10 TECHNICAL DATA 6000 V, 50 Hz power P kw Frame size Type Speed n rpm Efficiency at η % Power factor at cos ϕ I A I l / I N T l / T N Breakdown T b / T N Moment of inertia J kgm 2 Mass for IM 1001 kg 2 - POLES n s = 3000 rpm S 6AJZ6 355S / 92.2/ / 0.85/ S 6AJZ6 355S /92.9/ /0.85/ M 6AJZ6 355M / /0.85/ M 6AJZ6 355M / / S 6AJZ6 400S /94.1/ /0.87/ S 6AJZ6 400S /94.4/ /0.87/ M 6AJZ6 400M /94.5/ /0.86/ M 6AJZ6 400M /94.4/ /0.86/ S 6AJZ6 450S /94.4/ /0.87/ S 6AJZ6 450S /94.2/ /0.88/ M 6AJZ6 450M /94.4/ /0.88/ M 6AJZ6 450M /94.5/ /0.88/ S 6AJZ6 500S /95.1/ /0.90/ S 6AJZ6 500S /95.3/ /0.90/ M 6AJZ6 500M /95.3/ /0.89/ M 6AJZ6 500M /95.3/ /0.89/ M 6AJZ6 500M /95.4/ /0.89/ S 6AJZ6 560S /96.3/ /0.89/ S 6AJZ6 560S /96.4/ /0.89/ M 6AJZ6 560M /96.5/ /0.89/ M 6AJZ6 560M /96.5/ /0.89/

13 6000 V, 50 Hz power P kw Frame size Type Speed n rpm Efficiency at η % Power factor at cos ϕ I A I l / I N T l / T N Breakdown T b / T N Moment of inertia J kgm 2 Mass for IM 1001 kg 4 - POLES n s = 1500 rpm S 6AJZ6 355S /92.3/ /0.87/ S 6AJZ6 355S /92.8/ /0.87/ M 6AJZ6 355M /93.2/ /0.89/ M 6AJZ6 355M /93.5/ /0.90/ S 6AJZ6 400S /93.6/ /0.89/ S 6AJZ6 400S /93.8/ /0.89/ M 6AJZ6 400M /94.0/ /0.90/ M 6AJZ6 400M /94.1/ /0.90/ S 6AJZ6 450S /94.5/ /0.89/ S 6AJZ6 450S /94.6/ /0.89/ M 6AJZ6 450M /94.7/ /0.89/ M 6AJZ6 450M /94.9/ /0.89/ S 6AJZ6 500S /96.1/ /0.89/ S 6AJZ6 500S /96.2/ /0.88/ M 6AJZ6 500M /96.2/ /0.89/ M 6AJZ6 500M /96.2/ /0.88/ M 6AJZ6 500M /96.3/ /0.88/ S 6AJZ6 560S /96.4/ /0.90/ S 6AJZ6 560S /96.5/ /0.90/ M 6AJZ6 560M /96.6/ /0.90/ M 6AJZ6 560M /96.7/ /0.89/ S 6AJZ6 630S /96.8/ /0.89/ S 6AJZ6 630S /96.9/ /0.88/ M 6AJZ6 630M /96.9/ /0.88/ S 6AJZ6 710S /96.9/ /0.89/ S 6AJZ6 710S /97.0/ /0.89/ M 6AJZ6 710M /97.0/ /0.89/ M 6AJZ6 710M /97.2/ /0.90/

14 6000 V, 50 Hz power P kw Frame size Type Speed n rpm Efficiency at η % Power factor at cos ϕ I A I l / I N T l / T N Breakdown T b / T N Moment of inertia J kgm 2 Mass for IM 1001 kg 6 - POLES n s = 1000 rpm M 6AJZ6 355M /92.9/ /0.82/ M 6AJZ6 355M /93.3/ / S 6AJZ6 400S /93.0/ /0.84/ S 6AJZ6 400S /93.2/ /0.84/ M 6AJZ6 400M /93.4/ /0.84/ M 6AJZ6 400M /93.6/ /0.84/ S 6AJZ6 450S /93.9/ /0.84/ S 6AJZ6 450S /94.0/ /0.84/ S 6AJZ6 450S /94.1/ /0.84/ M 6AJZ6 450M /94.2/ /0.85/ M 6AJZ6 450M /94.3/ /0.84/ S 6AJZ6 500S /96.2/ /0.87/ S 6AJZ6 500S /96.3/ /0.87/ S 6AJZ6 500S /96.4/ /0.87/ M 6AJZ6 500M /96.3/ /0.87/ M 6AJZ6 500M /96.4/ /0.87/ S 6AJZ6 560S /96.4/ /0.87/ S 6AJZ6 560S /96.6/ /0.87/ M 6AJZ6 560M /96.7/ /0.87/ M 6AJZ6 560M /96.7/ /0.87/ S 6AJZ6 630S /97.1/ /0.86/ M 6AJZ6 630M /97.2/ /0.87/ M 6AJZ6 630M /97.2/ /0.88/ S 6AJZ6 710S /97.2/ /0.87/ S 6AJZ6 710S /97.2/ /0.87/ M 6AJZ6 710M /97.4/ /0.87/ S 6AJZ6 800S /97.5/ /0.87/ S 6AJZ6 800S /97.6/ /0.86/ S 6AJZ6 800S /97.7/ /0.86/ M 6AJZ6 800M /97.7/ /0.86/

15 6000 V, 50 Hz power P kw Frame size Type Speed n rpm Efficiency at η % Power factor at cos ϕ I A I l / I N T l / T N Breakdown T b / T N Moment of inertia J kgm 2 Mass for IM 1001 kg 8 - POLES n s = 750 rpm S 6AJZ6 400S /91.9/ /0.74/ S 6AJZ6 400S /92.2/ /0.75/ M 6AJZ6 400M /92.5/ /0.75/ M 6AJZ6 400M /92.7/ /0.76/ M 6AJZ6 400M /92.9/ /0.77/ S 6AJZ6 450S /92.8/ /0.78/ S 6AJZ6 450S /93.0/ /0.79/ S 6AJZ6 450S /93.2/ /0.78/ M 6AJZ6 450M /93.4/ /0.79/ M 6AJZ6 450M /93.5/ /0.78/ S 6AJZ6 500S /96.1/ /0.82/ S 6AJZ6 500S /96.1/ /0.82/ S 6AJZ6 500S /96.2/ /0.82/ M 6AJZ6 500M /96.4/ /0.82/ M 6AJZ6 500M /96.5/ /0.82/ M 6AJZ6 500M /96.6/ /0.82/ S 6AJZ6 560S /96.5/ /0.83/ S 6AJZ6 560S /96.6/ /0.83/ M 6AJZ6 560M /96.6/ /0.82/ S 6AJZ6 630S /96.6/ /0.84/ S 6AJZ6 630S /96.8/ /0.83/ M 6AJZ6 630M /96.8/ /0.84/ M 6AJZ6 630M /96.8/ /0.84/ S 6AJZ6 710S /97.0/ /0.85/ S 6AJZ6 710S /97.0/ /0.86/ M 6AJZ6 710M /97.1/ /0.86/ M 6AJZ6 710M /97.1/ /0.87/ S 6AJZ6 800S /97.3/ /0.86/ M 6AJZ6 800M /97.3/ /0.87/ M 6AJZ6 800M /97.5/ /0.85/

16 6000 V, 50 Hz power P kw Frame size Type Speed n rpm Efficiency at η % Power factor at cos ϕ I A I L / I N T l / T N Breakdown T b / T N Moment of inertia J kgm 2 Mass for IM 1001 kg 10 - POLES n s = 600 rpm S 6AJZ6 450S /92.7/ /0.74/ S 6AJZ6 450S /92.8/ /0.74/ S 6AJZ6 450S /92.8/ /0.74/ M 6AJZ6 450M /93.0/ /0.74/ M 6AJZ6 450M /93.2/ /0.74/ S 6AJZ6 500S /94.9/ /0.74/ S 6AJZ6 500S /95.1/ /0.74/ S 6AJZ6 500S /95.2/ /0.75/ M 6AJZ6 500M /95.2/ /0.74/ M 6AJZ6 500M /95.5/ /0.74/ S 6AJZ6 560S /96.1/ /0.78/ S 6AJZ6 560S /96.2/ /0.77/ S 6AJZ6 560S /96.2/ /0.77/ M 6AJZ6 560M /96.3/ /0.77/ M 6AJZ6 560M /96.4/ /0.77/ S 6AJZ6 630S /96.5/ /0.78/ S 6AJZ6 630S /96.5/ /0.78/ M 6AJZ6 630M /96.6/ /0.78/ S 6AJZ6 710S /96.6/ /0.80/ S 6AJZ6 710S /96.8/ /0.80/ M 6AJZ6 710M /96.8/ /0.80/ M 6AJZ6 710M /96.8/ /0.81/ S 6AJZ6 800S /97.1/ /0.83/ M 6AJZ6 800M /97.1/ /0.81/ M 6AJZ6 800M /97.2/ /0.82/

17 6000 V, 50 Hz power P kw Frame size Type Speed n rpm Efficiency at η % Power factor at cos ϕ I A I l / I N T l / T N Breakdown T b / T N Moment of inertia J kgm 2 Mass for IM 1001 kg 12 - POLES n s = 500 rpm S 6AJZ6 450S /92.2/ /0.67/ S 6AJZ6 450S /92.3/ /0.67/ M 6AJZ6 450M /92.4/ /0.67/ M 6AJZ6 450M /92.5/ /0.67/ S 6AJZ6 500S /94.7/ /0.67/ S 6AJZ6 500S /94.8/ /0.68/ S 6AJZ6 500S /95.0/ /0.67/ M 6AJZ6 500M /95.1/ /0.68/ S 6AJZ6 560S /95.4/ // S 6AJZ6 560S /95.6/ /0.71/ M 6AJZ6 560M /95.7/ /0.72/ M 6AJZ6 560M /95.7/ /0.72/ S 6AJZ6 630S /96.1/ /0.75/ S 6AJZ6 630S /96.3/ /0.74/ M 6AJZ6 630M /96.4/ /0.74/ M 6AJZ6 630M /96.5/ /0.77/ S 6AJZ6 710S /96.5/ /0.76/ S 6AJZ6 710S /96.6/ /0.76/ S 6AJZ6 710S /96.7/ /0.76/ S 6AJZ6 800S /96.7/ /0.81/ S 6AJZ6 800S /96.9/ /0.81/ M 6AJZ6 800M /96.9/ /0.81/ M 6AJZ6 800M /97.0/ /0.81/ NOTICE: All technical data are for information purposes only, and are subject to alternations without previous notice

18 11 OUTLINE DRAWINGS 11.1 Frame size H = mm, rolling bearings

19 11.2 Frame size H = mm, rolling bearings

20 11.3 Frame size H = mm, sleeve bearings

21 12 QUESTIONNAIRE FOR TENDERING CAGE INDUCTION MOTORS A BASIC DATA 5 Speed Regulation via Frequency Converter: yes - no 1 Power Pn(kW) 6 Number of Consecutive Starts from Cold Condition: 2 Voltage Un(V) 7 Number of Consecutive Starts from Hot Condition: 3 Frequency fn(hz) 8 4 Speed of Rotation n(rpm) 9 5 Duty: continuous, intermittent E REQUIREMENTS ON MOTOR DESIGN 6 Constructional Form IM 1 Overloading of... % during... minutes. 7 Degree of Protection IP 2 Voltage Variation: 8 Method of Cooling IC 3 Frequency Variation: 9 Direction of Rotation 4 Axial Force of... N, acting downward - upward 10 Explosion Proof Ex 5 Radial Force of... N, acting Installation (outdoors, indoors) 6 Noise Level db(a): 12 Standards 7 Neutral Point brought out: yes - no 13 Nos. of Pieces 8 MainTerminal Box: left-hand side, right-hand side B DATA ON DRIVEN MACHINE 9 Second Terminal Box: yes - no 1 Driven Machine F REQUIRED EQUIPMENT 2 Moment of Inertia J(kgm ) 1 Space Heaters: yes - no 3 Torque Characteristics 2 Thermometers in Bearings: type..., pcs... n(%) Thermometers in Windings: type..., pcs... M(Nm) 4 C ENVIRONMENTAL CONDITIONS 5 1 Ambient Temperature ( C) 6 2 Temperature of Cooling Water ( C) G SPARE PARTS: 3 Relative Humidity (%) 7 4 Altitude Above Sea Level (m) 8 5 Ambient: (dusty, salty, etc.) 9 D DATA ON TRANSFER OF TORQUE AND STARTING CONDITION 1 Type of Coupling 2 Direct On-line Starting H DOCUMENTATION: 3 Starting via Reactance, Autotransformer: Language: 4 Min. Voltage during Motor Starting (V) 12 Fill in your address, phone and fax number: Filled by: Date:

CONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances

CONTENTS 1 GENERAL 2 STANDARDS. 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances CONTENTS 1 GENERAL 2 STANDARDS 3 TECHNICAL FEATURES 3.1 Basic Design Data 3.2 Standard Accessories 3.3 Tolerances 4 MOTOR DESIGN 4.1 Stator Casing 4.2 Stator Core with Winding 4.3 Stator Winding and Insulation

More information

Slip-ring motors MAR Series

Slip-ring motors MAR Series Slip-ring motors MAR Series ABOUT US DAC Electric is a fairly young but highly experienced combination of professionals from all over the world. The founders, from the Netherlands and the Czech Republic,

More information

Teepak Totally Enclosed Tube Ventilated High Voltage Induction Motors. A Regal Brand.

Teepak Totally Enclosed Tube Ventilated High Voltage Induction Motors. A Regal Brand. Teepak Totally Enclosed Tube Ventilated High Voltage Induction Motors A Regal Brand www.regalbeloit.com Specifications Range Poles Voltage : Upto 3000 KW : Upto 14 Pole : Upto 11000 Volt Frame : 450 1000

More information

Design specifications

Design specifications Design specifications Design To relevant standards: IEC, VDE, DIN, ISO, EN With squirrel-cage or slipring rotor Degree of protection IP 55 / IP 65 Cooling method IC511, suitable for both indoor and outdoor

More information

SINGLE PHASE TEFC CAGE MOTORS

SINGLE PHASE TEFC CAGE MOTORS SINGLE PHASE TEFC CAGE MOTORS 2 SINGLE PHASE TEF CAGE MOTORS Mechanical protection: IP 54 Voltage: 220 V, 50 Hz Type Output power P N kw Rated speed n N min -1 Efficiency % Power factor cos Rated current

More information

A6C A5C-B6C B5C B5H A6C A5C B6C B5C B5H. Model. Up to kw. Power. Up to V. Voltages. Model IP55. Frame Pole 2, 4, 6, 8 and 10

A6C A5C-B6C B5C B5H A6C A5C B6C B5C B5H. Model. Up to kw. Power. Up to V. Voltages. Model IP55. Frame Pole 2, 4, 6, 8 and 10 A6C A5C-B6C B5C B5H Model Power Voltages Model IP55 A6C A5C B6C B5C B5H Up to 2.400 kw Up to 11.000 V LV A6C - B6C - A5C - B5C MV B5H Frame 71 560 Pole 2, 4, 6, 8 and 10 Cooling IC 411 ( IC 416 optional)

More information

MJH. Model. Up to kva. Power. Up to V. Voltages. Frame 400 ± Pole 4, 6, 8. (over contact MM) Cooling IC 01

MJH. Model. Up to kva. Power. Up to V. Voltages. Frame 400 ± Pole 4, 6, 8. (over contact MM) Cooling IC 01 MJH Model Power Voltages MJH Up to 12.500 kva Up to 15.000 V Frame 400 ± 1.250 Pole 4, 6, 8 Cooling IC 01 (over contact MM) IP Enclosure Main Applications Sector IP 23. Available up to IP 44 with filters.

More information

MJB. Model. Up to kva. Power. Up to V. Voltages. Frame 160 ± 900. Pole 4, 6, 8, 10 and 12. (over contact MM) Cooling IC 01

MJB. Model. Up to kva. Power. Up to V. Voltages. Frame 160 ± 900. Pole 4, 6, 8, 10 and 12. (over contact MM) Cooling IC 01 MJB Model Power Voltages MJB Up to 6.500 kva Up to 1.000 V Frame 160 ± 900 Pole 4, 6, 8, 10 and 12 Cooling IC 01 (over contact MM) IP Enclosure Main Applications Sector IP 23. Available up to IP 44 with

More information

MJB. Model. Up to kva. Power. Up to V. Voltages. Frame 160 ± 900. Pole 4, 6, 8, 10 and 12. (over contact MM) Cooling IC 01

MJB. Model. Up to kva. Power. Up to V. Voltages. Frame 160 ± 900. Pole 4, 6, 8, 10 and 12. (over contact MM) Cooling IC 01 MJB Model Power Voltages MJB Up to 6.500 kva Up to 1.000 V Frame 160 ± 900 Pole 4, 6, 8, 10 and 12 Cooling IC 01 (over contact MM) IP Enclosure Main Applications Sector IP 23. Available up to IP 44 with

More information

1LG0 Low-voltage Motors

1LG0 Low-voltage Motors Low-voltage motors up to 315kW Catalog D81.5.1 1LG Low-voltage Motors Answers for industry. 1 Table of Contents Overview 3 Motor standards 5 Mechanical design 6 Electrical design 1 Converter fed application

More information

Electric Machines Catalogue. Quality MV and HV Machines from Stock & Engineered to Order PRODUCT CATALOGUE

Electric Machines Catalogue. Quality MV and HV Machines from Stock & Engineered to Order PRODUCT CATALOGUE PRODUCT CATALOGUE Electric Machines Catalogue Quality MV and HV Machines from Stock & Engineered to Order Powered by Technology. Driven by Service www.parsons-peebles.com Over 115 years experience in design,

More information

Squirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES SIZES. MarelliMotori ASI.CT.033.2

Squirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES SIZES. MarelliMotori ASI.CT.033.2 Marine Motors Three Phase Squirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES 63-400 SIZES MarelliMotori ASI.CT.033.2 CONTENTS Page STANDARDS 5 ESSENTIAL AND NON-ESSENTIAL SERVICE 5 CLASSIFICATION

More information

Turbogenerators. With Top Performance for Steam and Gas Applications. Specifically tailored 4-pole Synchronous Turbogenerators

Turbogenerators. With Top Performance for Steam and Gas Applications. Specifically tailored 4-pole Synchronous Turbogenerators Turbogenerators With Top Performance for Steam and Gas Applications Specifically tailored 4-pole Synchronous Turbogenerators siemens.com / automation 2 Top Performance Turbogenerators for Steam and Gas

More information

W22 Medium Voltage Motors TEFC - Severe Duty

W22 Medium Voltage Motors TEFC - Severe Duty 101 www.pamensky.com W22 Medium Voltage Motors TEFC - Severe Duty Standard Features Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 1200V, 2300V, 2400V, 3300V, 4000V, 4160V & 6600V Totally Enclosed Fan

More information

Excitation system is of Static Silicon Excitation System, including excitation transformer, thyristors, and AVR.

Excitation system is of Static Silicon Excitation System, including excitation transformer, thyristors, and AVR. Turbo - Generator Type: QF Series 1. General The generator is a two pole, cylindrical rotor type synchronous machine, directly coupled with steam turbine. It has a closed-circuit cooling system to cool

More information

Series E4F E5F

Series E4F E5F Three Phase Induction Motors With Rotors Wound for Hoists Series E4F 160-315 E5F 355-400 ASI NT 003.1 I N D E X Use 2 Electrical Tolerances 9 Mechanical Tolerances 9 General Characteristics 2 Technical

More information

300 kw ~ 6,300 kw (400 HP ~ 8,500 HP) MEDIUM VOLTAGE VERTICAL MOTORS

300 kw ~ 6,300 kw (400 HP ~ 8,500 HP) MEDIUM VOLTAGE VERTICAL MOTORS 300 kw ~ 6,300 kw (400 HP ~ 8,500 HP) MEDIUM VOLTAGE VERTICAL MOTORS series: Combining over 100 years of experience with innovative new technology makes the 21-L series the right choice for the demanding

More information

LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES

LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES LARGE THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS FOR HEAVY DUTY APPLICATIONS ADH SERIES FRAMES 355 560 355kW 1500kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in

More information

1. SPECIFICATION. Altitude of motor installation. Information: Resistance and temperature specifications of the PTC thermistor / posistor/.

1. SPECIFICATION. Altitude of motor installation. Information: Resistance and temperature specifications of the PTC thermistor / posistor/. 1. SPECIFICATION 5 GENERAL INFORMATION Motors with parameters according to the data sheet comply with the requirements of the IEC 60034-1 standard, and IEC 60034-30 class efficiency IE2 Motor versions:

More information

ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame. Australian Version October 2013

ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame. Australian Version October 2013 ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame Australian Version October 2013 ODP SERIES (OPEN DRIP PROOF) PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS, C280M TO C355LB FRAME

More information

Medium Voltage Induction Motors. 21-L Series New High Efficiency Design for High Capacity Applications 450 kw 18,500 kw (600 HP 25,000 HP)

Medium Voltage Induction Motors. 21-L Series New High Efficiency Design for High Capacity Applications 450 kw 18,500 kw (600 HP 25,000 HP) Medium Voltage Induction Motors 21-L Series New High Efficiency Design for High Capacity Applications 450 kw 18,500 kw (600 HP 25,000 HP) series: Combining over 100 years of experience with innovative

More information

High-voltage motors TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION

High-voltage motors TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION High-voltage motors series TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION series : Combining over 00 years experience with innovative new technology makes the series the right choice for the

More information

Three-phase asynchronous motors

Three-phase asynchronous motors Three-phase asynchronous motors for low voltage with squirrel-cage rotor Product specification Series K11R, K21R and K22R Introduction Standards and regulations Progressive correspondence between output

More information

AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1

AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1 AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1 STANDARD AND SPECIFICATION Performance: Meet the requirement of Singapore standard

More information

INTER PLANT STANDARD STEEL INDUSTRY. Corresponding IS does not exist

INTER PLANT STANDARD STEEL INDUSTRY. Corresponding IS does not exist INTER PLANT STANDARD STEEL INDUSTRY IPSS SPECIFICATION FOR ac ROLLER TABLE MOTORS (Second Revision) Corresponding IS does not exist IPSS:1-03-007-14 Formerly : IPSS:1-03-007-03 0. FOREWORD 0.1 This Inter

More information

From 4 to 20 poles ( over contact MM) IP 23. Available up to IP 44 with filters.

From 4 to 20 poles ( over contact MM) IP 23. Available up to IP 44 with filters. MJT Model Power Voltages MJT Up to 5.200 kva Up to 1.000 V Frame 160 ± 900 Pole From 4 to 20 poles ( over contact MM) Cooling IC 01 IP Enclosure Main Applications Sector IP 23. Available up to IP 44 with

More information

Brake Motors Aluminium Frame Improved Efficiency EFF2

Brake Motors Aluminium Frame Improved Efficiency EFF2 Motors Energy Automation Coatings Brake Motors Aluminium Frame Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC Output: 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V

More information

Technical Documentation

Technical Documentation Technical Documentation VN08EN THREE PHASE INDUCTION MOTORS WELDED 6000 V 50 Hz 00-6300 kw Vision We set your ideas in motion. We do not merely manufacture motors, but instead turn the ambitious concepts

More information

Cast Iron Frame Motors For Zone 21 Improved Efficiency EFF2

Cast Iron Frame Motors For Zone 21 Improved Efficiency EFF2 Motors Energy Automation Coatings Cast Iron Frame Motors For Zone 21 Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP66, TEFC : 0.12 up to 250kW Frames: 63 up to 355M/L Voltage:

More information

CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm

CPLS Asynchronous motors for variable frequency. 95 Nm to 2900 Nm 95 Nm to 2900 Nm Introduction The range of IP23 protection CPLS asynchronous motors was designed for fixed and variable speed applications when there is little space available or (and) there is a wide

More information

MAX-VH. Vertical Hollow Shaft Motors

MAX-VH. Vertical Hollow Shaft Motors MAX-VH Vertical Hollow Shaft Motors Specifications OTHER PERFORMANCE CONSTRUCTION APPLICATION RATING Item Type Of Motors Design Standards Voltages Frequency Output Range RPM (SYN.) Time Duty Frame Size

More information

Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors

Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors Series R2, Frame 63 355 Introduction KHM R2 series cast iron motors are totally enclosed fan cooled, 3 phase, and squirrel cage induction

More information

Ordering information. When placing an order, specify motor type, size and product code according to the following example.

Ordering information. When placing an order, specify motor type, size and product code according to the following example. Ordering information When placing an order, specify motor type, size and product code according to the following example. Example Motor type M3AA 112 MB Pole number 4 Mounting arrangement (IM-code) IM

More information

MOUNTING & MAINTENANCE INSTRUCTIONS FOR

MOUNTING & MAINTENANCE INSTRUCTIONS FOR 9 Pages / Page 1 MOUNTING & MAINTENANCE INSTRUCTIONS FOR THREEPHASE INDUCTION MOTORS - TYPES DM1 / DMA1 / DMA2 TABLE OF CONTENTS page 1 General information 2 2 Delivery 2 3 Mounting 2 4 Coupling 2 4.1.

More information

champion series motors

champion series motors Introducing A brand new series of Super Performers Data Sheet champion series motors FRAME SIZE 63-132M TEFC 3 Phase Squirrel Cage Induction Motors Siemens CHAMPION Series Cage Motors are suitable for

More information

Products & Services EQ Series AC Drives. TEAMMaster WOUND ROTOR MOTORS WORLD SERIES SYNCHRONOUS MOTORS. EXPLOSION PROOF (Division 1, Zone 1)

Products & Services EQ Series AC Drives. TEAMMaster WOUND ROTOR MOTORS WORLD SERIES SYNCHRONOUS MOTORS. EXPLOSION PROOF (Division 1, Zone 1) 630-543-7867 Products & Services EQ7 1-1000 hp Intelligent Keypad with Extensive Diagnostics Select Any of 4 Control Methods - V/ Hz - Dynamic Torque - Sensorless Vector - Closed-loop Vector Quick Setup

More information

INTER PLANT STANDARD STEEL INDUSTRY

INTER PLANT STANDARD STEEL INDUSTRY INTER PLANT STANDARD STEEL INDUSTRY IPSS SPECIFICATION FOR ac CRANE (Hoist and Winches) DUTY SQUIRREL CAGE INDUCTION MOTORS (Fourth Revision) BASED ON IS 325:1996 Formerly: IPSS:1-03-004-05 0. FOREWORD

More information

Non-Standard Motors Overview. Low-Voltage. IEC Squirrel-Cage Motors Frame sizes 315 to 450 Power range 160 kw to 1250 kw

Non-Standard Motors Overview. Low-Voltage. IEC Squirrel-Cage Motors Frame sizes 315 to 450 Power range 160 kw to 1250 kw Non-Standard Motors Overview MOTORS Low-Voltage IEC Squirrel-Cage Motors Frame sizes 15 to 450 Power range 160 kw to 1250 kw Non-standard motors frame size 15 and above Overview N compact three-phase asynchronous

More information

Catalog. Low voltage General performance IE2 high efficiency motors according to EU MEPS

Catalog. Low voltage General performance IE2 high efficiency motors according to EU MEPS Catalog Low voltage General performance IE2 high efficiency motors according to EU MEPS We provide motors, generators and mechanical power transmission products, services and expertise to save energy and

More information

Company name: GSI Created by: SLK Phone: (65) Date: 13/03/2017 Client: Client Number: Contact:

Company name: GSI Created by: SLK Phone: (65) Date: 13/03/2017 Client: Client Number: Contact: Qty. Description 1 2L Product No.: 81U1332 The motor is a 3-phase AC standard motor. Installation: Range of ambient temperature: -2.. C Flange size for motor: FF Note! Product picture may differ from actual

More information

ELK PRODUCT CATALOGUE. elkmotor.com.tr

ELK PRODUCT CATALOGUE. elkmotor.com.tr ELK 0501-0418 PRODUCT CATALOGUE elkmotor.com.tr THREE PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS ELK Motor has been founded by major shareholders of Yılmaz Reduktor, as a continuation of the product family.

More information

INDEX NEMA PREMIUM EFFICIENCY

INDEX NEMA PREMIUM EFFICIENCY INDEX S EED EXC DS R TS O DAR MEE E STAN CE THREE-PHASE MOTORS - FEATURES & LIST PRICES THREE-PHASE MOTORS TEFC - Foot-Mount................... A-51 A-54 TEFC C-Flange........................ A-55 ODP

More information

Low Voltage Induction Motors

Low Voltage Induction Motors Low Voltage Induction Motors Catalogue-2009/04 E TAC-C CAST IRON Frame Size 71->355 0,18-315 kw t-telectric.com Technical features TAC-C motors are designed and manufactured according to IEC34, IEC72,

More information

Three-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC.

Three-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC. Three-phase roller table motors with squirrel-cage rotor for the application at the frequency converters Series A21O, A20O, ARB, ARC Product summary VEM motors GmbH Introduction Roller table motors are

More information

SPECIFICATIONS - DETAILED PROVISIONS Section Vertical Hollowshaft Electric Motors C O N T E N T S

SPECIFICATIONS - DETAILED PROVISIONS Section Vertical Hollowshaft Electric Motors C O N T E N T S Revised 04/14/2016 SPECIFICATIONS - DETAILED PROVISIONS Section 16151 - Vertical Hollowshaft Electric Motors C O N T E N T S PART 1 - GENERAL... 1 1.01 SCOPE... 1 1.02 SPECIFIC PROJECT REQUIREMENTS...

More information

General Specifications. Cooling Method 3M series are IC 411 Standard. IC 416, IC 418 can be provided Upon request

General Specifications. Cooling Method 3M series are IC 411 Standard. IC 416, IC 418 can be provided Upon request 3M SERIES Three Phases Low Voltage Asynchronous Motors 3M Series Vilma motors are designed and manufactured with high quality materials and workmanship in order to meet demanding and arduous operation

More information

THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS ACCORDING IEC

THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS ACCORDING IEC THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS ACCORDING IEC 60034-30 1st EDITION IE1/IE2-MS IE1/IE2-EG Series IE1 Standard efficiency IE2 High efficiency THREE-PHASE ASYNCHRONOUS MOTORS EFFICIENCY CLASS

More information

FCR asynchronous brake motors LS FCR. General information

FCR asynchronous brake motors LS FCR. General information General information LIFTING USE : U.L. Enclosed three-phase asynchronous brake motors, LS series with failsafe brake, according to IEC 34, 72, EN 50281. Single speed : 0.55 to 15, frame size from 80 to

More information

CORE VALUES TECHNOLOGIES ESS-ESD PRODUCT CATALOGUE Enjoy the peace of mind ENGINE POWER SUPPLIERS AND EQUIPMENT HEAT

CORE VALUES TECHNOLOGIES ESS-ESD PRODUCT CATALOGUE   Enjoy the peace of mind ENGINE POWER SUPPLIERS AND EQUIPMENT HEAT TECHNOLOGIES ENGINE POWER SUPPLIERS AND EQUIPMENT HEAT Enjoy the peace of mind ESS-ESD PRODUCT CATALOGUE CORE VALUES PEACE OF MIND EFFICIENCY FAIRNESS RESPONSIBILITY CUSTOMER ORIENTATION GROWING DEVELOPED

More information

High Voltage Generators. TM21-TG Series. 2-Pole Air Cooled Turbine Generator Up to 80,000 kw (107,000 HP)

High Voltage Generators. TM21-TG Series. 2-Pole Air Cooled Turbine Generator Up to 80,000 kw (107,000 HP) High Voltage Generators TM21-TG Series 2-Pole Air Cooled Turbine Generator Up to 80,000 kw (107,000 HP) TMEIC has a proud and rich history of providing the latest generator technology for a broad range

More information

IP66 GSW GEAR BOX MOTOR SERIES

IP66 GSW GEAR BOX MOTOR SERIES IP66 GSW GEAR BOX MOTOR SERIES Three Phase Aluminium Gear Box Motors Australian Version October 2013 CONTENTS INTRODUCTION Pg 3 MATERIALS AND CONSTRUCTION Pg 3-4 SERIES OVERVIEW Pg 5 PERFORMANCE DATA Pg

More information

THREE PHASE ASYNCHRONOUS MOTORS. MS/S Series (frame Aluminum) TC Series (frame Cast iron) Y Series (frame Cast iron)

THREE PHASE ASYNCHRONOUS MOTORS. MS/S Series (frame Aluminum) TC Series (frame Cast iron) Y Series (frame Cast iron) THREE PHASE ASYNCHRONOUS MOTORS MS/S Series (frame 56-200 Aluminum) TC Series (frame 160-355 Cast iron) Y Series (frame 132-355 Cast iron) INDICE 01. General features p.03 02. Standards p.04 03. Mounting

More information

BHARAT ALUMINIUM COMPANY LTD. SPECIFICATIONS FOR SYNCHRONOUS GENERATOR GENERAL Make : Jinan Power Equipment Factory Type : WX2

BHARAT ALUMINIUM COMPANY LTD. SPECIFICATIONS FOR SYNCHRONOUS GENERATOR GENERAL Make : Jinan Power Equipment Factory Type : WX2 BHARAT ALUMINIUM COMPANY LTD. SPECIFICATIONS FOR SYNCHRONOUS GENERATOR 1.00.00 GENERAL 1.01.00 Make : Jinan Power Equipment Factory 1.02.00 Type : WX21Z-073LLT 1.03.00 Reference Standard : GB/T7064-2002

More information

KAT.NMST ENG NORM ELECTRIC MOTORS THREE PHASES SQUIRREL CAGE TEFC NMST

KAT.NMST ENG NORM ELECTRIC MOTORS THREE PHASES SQUIRREL CAGE TEFC NMST KAT.NMST.02.14.ENG NORM ELECTRIC MOTORS THREE PHASES SQUIRREL CAGE TEFC NMST 90 355 IMPORTANT NOTE: Due to the continious development policy, our companyreserves the right to make changes the values, dimensions

More information

STANDARD VERSION OF HIGH VOLTAGE MOTORS

STANDARD VERSION OF HIGH VOLTAGE MOTORS AUSTRIA STANDARD VERSION OF HIGH VOLTAGE MOTORS The following pages contains the three phase squirrel cage high voltage induction motors in three different versions. a) Open drip-proof IP23 motors SCf

More information

INTER PLANT STANDARD STEEL INDUSTRY. SPECIFICATION FOR GENERAL PURPOSE SQUIRREL CAGE INDUCTION MOTORS (Fifth Revision) BASED ON IS 325:1996

INTER PLANT STANDARD STEEL INDUSTRY. SPECIFICATION FOR GENERAL PURPOSE SQUIRREL CAGE INDUCTION MOTORS (Fifth Revision) BASED ON IS 325:1996 INTER PLANT STANDARD STEEL INDUSTRY IPSS SPECIFICATION FOR GENERAL PURPOSE SQUIRREL CAGE INDUCTION MOTORS (Fifth Revision) BASED ON IS 325:1996 IPSS: 1-03-001-14 Formerly: IPSS:1-03-001-05 0. FOREWORD

More information

SWE SERIES (IE3) WONDER ELECTRIC MOTOR (S) PTE LTD. Energy Saving Low Noise Environmental Friendly IEC Dimension Low Vibration European Design

SWE SERIES (IE3) WONDER ELECTRIC MOTOR (S) PTE LTD. Energy Saving Low Noise Environmental Friendly IEC Dimension Low Vibration European Design RANGE OF PRODUCTS Three phase asynchronous squirrel-cage & slip ring induction motors Three phase asynchronous self-braking motors Hollow shaft rotor motors Cooling tower motors High motors, (IE2) (IE3)

More information

HAIE2 -Efficiency and reliability for industry

HAIE2 -Efficiency and reliability for industry HAIE2 -Efficiency and reliability for industry High performance with energy efficiency, this is the meaning of the new CAG electric motor. Low cost and best quality and long lifetime have been the basis

More information

Standard cast iron Motor

Standard cast iron Motor Standard cast iron Motor Frame size 80 to 355 Série 1L Phase 3 Voltage 265/460V 60Hz Types of mounting B3 V9 B5 B14 B6 B9 B3 / B5 V5 B3 / B14 B15 V1 B7 V18 V1 / V5 V8 V18 / V5 V6 B8 V3 / V6 V3 V19 V19

More information

Mounting & Maintenance Instructions OMT1 & OMT2 Motors

Mounting & Maintenance Instructions OMT1 & OMT2 Motors Mounting & Maintenance Instructions OMT1 & OMT2 Motors Seite 1 von 10 Inhalt Seite 1 General information 3 2 Delivery 3 3 Mounting 3 4 Coupling 3 4.1 Direct coupling 3 4.2 Indirect coupling 4 4.2.1 Flat

More information

IECEx Certificate of Conformity Annexe

IECEx Certificate of Conformity Annexe Equipment The Squirrel Cage Induction Motor Frames 280 to 315M are totally enclosed fan cooled (TEFC) motors with integral cast cooling fins on frame and end shields. They have winding designs which are

More information

general information General information - TEChNiCal CaTalOguE 1039/12

general information General information - TEChNiCal CaTalOguE 1039/12 general information General information - TEChNiCal CaTalOguE 1039/12 3 PRODuCT RaNgE mission For 50 years the Lafert Group have been committing to continuous growth by being the global leading manufacturer

More information

FLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information

FLSD (E) Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information (E) Atmospheres containing explosive GAS General information Flameproof totally enclosed three-phase asynchronous motors, FLSD (E) series, according to IEC 60034, 60038, 60072, 60079-0 and 60079-1, EN

More information

Asynchronous generators

Asynchronous generators Asynchronous generators Contents Product description 13/2 Overview of technical data 13/3 Motor selection data Series G4.R on the basis of Premium Efficiency IE3 13/4 Series GE.R on the basis of High Efficiency

More information

Three-phase asynchronous motors with squirrel-cage rotor for potentially explosive atmospheres

Three-phase asynchronous motors with squirrel-cage rotor for potentially explosive atmospheres Three-phase asynchronous motors with squirrel-cage rotor for potentially explosive atmospheres VEM motors GmbH Table of contents Page Technical explications Motors in the increased safety type of protection

More information

Customised Motors Three-phase Motors Single-phase Motors Brake Motors

Customised Motors Three-phase Motors Single-phase Motors Brake Motors Customised Motors Three-phase Motors Single-phase Motors Brake Motors www.lafert.com TECHNICAL CATALOGUE 2010 CONTENTS GENERAL INFORMATION 3 Product range 4 Standards and regulations 10 Conditions of installation

More information

Catalog Mars Low voltage Brake motors

Catalog Mars Low voltage Brake motors Catalog Mars 2014 Low voltage Brake motors We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers processes over the total

More information

Energy Saving Three Phase Motors

Energy Saving Three Phase Motors e-drive Energy Saving Three Phase Motors IEC frames 56 to 400 Outputs 0.09 to 630 IE2 MEPS2006 Type: AHE Aluminium Motors Type: HE Cast-Iron Motors 1 When you need all the features of a premium quality

More information

Basic Motor Technology ABB Motors

Basic Motor Technology ABB Motors Basic Motor Technology ABB Motors ABB Motors 1 Basic Motor Technology for ABB Motors' totally enclosed, fan cooled, threephase squirrel cage motors. This catalogue includes basic technical information

More information

EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model

EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model Contents Model A0553 C1125 V0494 A0713 C1285 V0554 A0843 C1455 V0754 A03 C15 V0854 C1915 V0974 C2185 V1154 C2905 Section Page Specifications 3-3 Model Designation 3-6 Impeller Data 3-8 Material Specifications

More information

CROMPTON GREAVES LTD.

CROMPTON GREAVES LTD. DC MOTORS CROMPTON GREAVES LTD. A household name in India and leader in the electrical engineering industry since 1937 offers a vast range of products and services...with International Quality Standards.

More information

Table of contents. Three-phase asynchronous motors DA

Table of contents. Three-phase asynchronous motors DA be in motion be in motion AC Asynchronous Motors DA 100-280 Table of contents 1. Three-phase asynchronous motor DA 100-280... 3 1.1. General technical data... 3 1.2. Ratings definition for ventilated

More information

Low-voltage motors up to 315kW. 1LG0 Low-voltage Motors. Answers for industry.

Low-voltage motors up to 315kW. 1LG0 Low-voltage Motors. Answers for industry. Low-voltage motors up to 315kW 1LG0 Low-voltage Motors Answers for industry. 1 Low-voltage squirrel-cage motors 4 Motor standard 4 Standard 5 Condition 5 Mechanical design 5 High quality performance 5

More information

Standardmotoren Standard motors

Standardmotoren Standard motors Standardmotoren Standard motors Contents Product description 2/2 Overview of technical data 2/5 2 Series W4.R for Premium Efficiency IE3 2/6 Series WE.R for High Efficiency IE2 2/14 Series K2.R for Standard

More information

Cutting-edge technologies backed by a century of experience

Cutting-edge technologies backed by a century of experience AHNAM is the world's leading supplier of high voltage induction machines used in a wide range of application in virtually every industry including oil, gas & petrochemicals, power generation, marine, pulp

More information

Technical catalogue 2012

Technical catalogue 2012 Technical catalogue 2012 customised MoToRS ThRee-PhaSe MoToRS Single-PhaSe MoToRS BRaKe MoToRS IE2 IE3 CONTENTS General information 3 Product range 4 Standards and regulations 10 Condition of installation

More information

Explosion and flame-proof cast iron electric motors

Explosion and flame-proof cast iron electric motors Explosion and flame-proof cast iron electric motors EEx-d, EEx-de, IIB, IIC II, 2G IP55 II, 2G&D IP66 T4, T5, T6 Frame size 56 to 160 3 phases Voltage 230/400 V 50Hz Voltage 265/460V 60Hz Types of mounting

More information

VEM motors Thurm GmbH

VEM motors Thurm GmbH VEM motors Thurm GmbH Installation, Operating and Maintenance Instructions Single-Phase Squirrel-Cage Induction Motors, Standard Version March 2005 1. General To avoid damage to the motors and equipment

More information

CAST RESIN DISTRIBUTION TRANSFORMERS 2016 EDITION

CAST RESIN DISTRIBUTION TRANSFORMERS 2016 EDITION CAST RESIN DISTRIBUTION TRANSFORMERS 2016 EDITION TMC TRANSFORMERS - GLOBAL NETWORK UK & IRELAND SPAIN NORTH AMERICA & CANADA GERMANY SWITZERLAND BENELUX & AUSTRIA ITALY POLAND INDIA CENTRAL & SOUTH AMERICA

More information

From 16 June 2011, motors placed for the first-time on the market shall have a minimum efficiency class of IE2.

From 16 June 2011, motors placed for the first-time on the market shall have a minimum efficiency class of IE2. INTRODUCTION New efficiency classes for the low-voltage three-phase motors (IE = International Efficiency). Along with the international discussion on energy efficiency a worldwide harmonized energy efficiency

More information

: B3; B5; B14; B34; B35; V1

: B3; B5; B14; B34; B35; V1 ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia

More information

Just Name Your Need. AMG and AMZ Synchronous Machines PRODUCT REVIEW

Just Name Your Need. AMG and AMZ Synchronous Machines PRODUCT REVIEW Just Name Your Need AMG and AMZ Synchronous Machines PRODUCT REVIEW Just Name Your Need Power for Industries P R O D U C T R E V I E W 2 3 4 5 6 7 8 9 11 12 13 14 16 17 18 19 20 21 22 23 24 26 28 AMG and

More information

THREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE

THREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE CAG Electric Machinery HGLIE2 series THREE PHASE ASYNCHRONOUS MOTORS WITH SQUIRREL CAGE Introduction Motors HGL IE2 with cast iron frame offers increased power output with reduced power consumption. This

More information

General Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features

General Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.

More information

M3000 Motors for Hazardous Areas. Low Voltage Non-sparking Motors Ex na, EEx na

M3000 Motors for Hazardous Areas. Low Voltage Non-sparking Motors Ex na, EEx na M3000 Motors for Hazardous Areas Low Voltage Non-sparking Motors Ex na, EEx na Non-sparking EEx na, Ex na, Ex N Range Standards Frame Size Output range Non-sparking Ex na IEC 60079-15 aluminium 90-250

More information

DSZ3. EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model

DSZ3. EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model Contents Model A0553 C1125 V0494 A0713 C1285 V0554 A0843 C1455 V0754 A1003 C1605 V0854 C1915 V0974 C2185 V1154 C2905 Section Page Specifications 3-203 Model Designation 3-206 Impeller Data 3-208 Material

More information

ABB Ltd HV Induction Machines

ABB Ltd HV Induction Machines ABB Ltd HV Induction Machines Classifying code or document type PERFORMANCE DATA OF MOTOR Department/Author Date of issue Lang. Rev. date Our ref. Design / JITESH 27.05.2008 En 09.06.2008 200839 Customer

More information

CEB 71204/a of 13 december 2005 SLSHR. 3-Phase Totally Enclosed Induction Motor Steel Housing Water-Cooled 30 to 1800 kw

CEB 71204/a of 13 december 2005 SLSHR. 3-Phase Totally Enclosed Induction Motor Steel Housing Water-Cooled 30 to 1800 kw CEB 71204/a of 13 december 2005 SLSHR 3-Phase Totally Enclosed Induction Motor Steel Housing Water-Cooled 30 to 1800 kw C.E.B. SLSHR RANGE TECHNICAL CATALOGUE 05/12/13 CONTENTS CONTENTS 2 APPLICATIONS

More information

Cast resin transformers

Cast resin transformers Product catalogue Cast resin transformers according to IEC/EN 60076, VDE 0532, DIN 42523 Power range up to 8 MVA Voltage range up to 36 kv Conductor material: copper or aluminum Protection types: IP 00

More information

Aluminium Frame Motors Improved Efficiency EFF2

Aluminium Frame Motors Improved Efficiency EFF2 Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V

More information

OM DC Motors Series. Ⅱ. Item Define Example:

OM DC Motors Series. Ⅱ. Item Define Example: OM DC Motors Series Ⅰ.Features and Uses OM DC motors Series are new developed products. The products have found wide use for prime mover in various machinery, such as mill auxiliary in metallurgical industry,

More information

Centurion High Voltage HTE & HCA series cast iron and fabricated steel

Centurion High Voltage HTE & HCA series cast iron and fabricated steel Centurion High Voltage HTE & HCA series cast iron and fabricated steel We convert power into motion to help the world run more efficiently BUSINESS PURPOSE ABOUT US Regal Beloit Corporation is a leading

More information

Technical catalogue customised MoToRS ThRee-PhaSe MoToRS Single-PhaSe MoToRS BRaKe MoToRS IE1

Technical catalogue customised MoToRS ThRee-PhaSe MoToRS Single-PhaSe MoToRS BRaKe MoToRS IE1 Technical catalogue 2012 customised MoToRS ThRee-PhaSe MoToRS Single-PhaSe MoToRS BRaKe MoToRS IE1 Technical catalogue 1043/12 CONTENTS General information 3 Product range 4 StandardS and regulations 10

More information

ABMA , Radial Bearings of Ball, Cylindrical Roller and Spherical Roller Types Metric Design.

ABMA , Radial Bearings of Ball, Cylindrical Roller and Spherical Roller Types Metric Design. Specification CT841-2016 Standard for Petroleum and Chemical Industry Definite Purpose, Severe- Duty, Totally Enclosed Air Over (TEAO) Permanent Magnet Synchronous Cooling Tower and Air Cooled Heat Exchanger

More information

Contact us. Catalog Low voltage generators for diesel and gas engines Industrial Marine applications - series Standard series

Contact us. Catalog Low voltage generators for diesel and gas engines Industrial Marine applications - series Standard series Contact us Catalog Low voltage generators for diesel and gas engines Industrial Marine applications - series Standard series We provide motors and generators, services and expertise to save energy and

More information

Three-phase asynchronous motors for low voltage with squirrel-cage rotor. with EU efficiency classification

Three-phase asynchronous motors for low voltage with squirrel-cage rotor. with EU efficiency classification Three-phase asynchronous motors for low voltage with squirrel-cage rotor with EU efficiency classification Contents Page Introduction 3 Standards and regulations 4 Efficiency 5 Bearings / Bearing lubrication

More information

High Efficiency three-phase LV Motors

High Efficiency three-phase LV Motors High Efficiency three-phase LV Motors www.lafert.com 2011 TECHNICAL CATALOGUE CONTENTS General information 3 [ I] Product range 4 Standards and regulations 10 Conditions of installation 14 Mechanical design

More information

PPA & PPC series motors High specification cast iron units

PPA & PPC series motors High specification cast iron units Edition 4 Issue 3 PPA & PPC series motors High specification cast iron units Accreditation No. 14396 SOLUTIONS, not just products Specialists in Electric Motors & AC Drives At CMG we offer customised packages

More information

DATA SHEET. Three Phase Induction Motor - Squirrel Cage. Customer : Product code : : W22 NEMA Premium Efficiency Three-Phase

DATA SHEET. Three Phase Induction Motor - Squirrel Cage. Customer : Product code : : W22 NEMA Premium Efficiency Three-Phase DATA SHEET Frame Output Poles Frequency Rated voltage Rated current L. R. Amperes LRC No load current Rated speed Slip Rated torque Locked rotor torque Breakdown torque Insulation class Service factor

More information

Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.

Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum. FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared

More information