ELK PRODUCT CATALOGUE. elkmotor.com.tr

Transcription

1 ELK PRODUCT CATALOGUE elkmotor.com.tr

2 THREE PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS

3 ELK Motor has been founded by major shareholders of Yılmaz Reduktor, as a continuation of the product family. ELK Motor manufactures electric motors from 71 up to frame size in a m 2 closed area built on a.000 m 2 open area. All motor series are designed and manufactured in accordance with European standards and in IE2 and IE3 efficiency classes. The main design and technology of ELK Motor is completely suitable to the IE3 efficiency class. Since the outside dimensions of the IE3 and IE2 design are completely same, the replacement of the IE2 motor with IE3 motors will be done easily. In addition to the motors according to the European standards, ELK Motor also manufactures special motors for its customers to decrease the cost and increase the productivity. ELK Motors, from engineering to manufacturing processes, are completely manufactured in our factory located in Çerkezköy. Motor shafts and end shields are manufactured by fully automatic CNC machines under a continuous quality control. The rotor and stator cores are manufactured in our fully automatic punching and interlocking lines. After injecting the pure aluminum into the rotor cores in a fully automatic rotor injection line, the rotor cores become ready for assembly. In automatic winding lines, stator cores are wound and varnished either by automatic dipping method or VPI (Vacuum Pressure Impregnation) method according to the needs and usage area. So the products are always in the best levels of quality and performance. After all of these operations, our motors which are assembled in accordance with product prescriptions are being tested and controlled fully for the last time and shipped to the customers after packaging.

4

5

6

7

8 CONTENTS TECHNICAL INFORMATION IEC/EN Regulation Mechanical Construction Electrical Construction Motors With Variable Speed Drives Motors in Several Environmental Conditions Winding Insulation/ Temperature Rise Classes Protection Classes Construction Types Bearings Radial Loads Axial Loads PRODUCT TYPE CODES IE2 MOTORS IE2 COMPACT MOTORS IE3 MOTORS DIMENSIONS ADDITIONAL INFORMATION Nameplate Description Spare Parts PTC Thermistor and Thermal Switch Anti-Condensation Heater and Drain Hole Non Drive End Shaft Extension and Canopy Brake, Hand Release, Separately Driven Fan, Encoder and Backstop

9 TECHNICAL INFORMATION

10 IEC/EN Regulation All of standard ELK Motors are designed, manufactured and tested according to the IEC and EN standards given below. IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC IEC EN Rating and performance Methods for determining losses and efficiency Classification of degrees of protection Methods of cooling Symbols of construction and mounting arrangements Terminal markings and direction of rotation Noise limits Built-in thermal protection Vibration limits Functional evaluation of insulation system Efficiency classes (IE Code) Standard voltages Dimensions and output for electrical machines EN EN Electromagnetic compatibility EN According to IEC , catalogue values are permitted to deviate from the real values as follows: Speed Efficiency Power Factor Locked rotor current Starting torque Break down torque Moment of inertia Sound pressure level 08

11 Mechanical Construction 71- frame size ELK Motors provides flexibility for different mounting types through their detachable feet which can be mounted on three sides. This feature allows terminal box assembly on the desired side. Terminal box is on the top for standard motors. - frame size motors have fixed feet construction. MOTOR SIZE 71- MOTOR SIZE - Additionally the housing and end shields are designed symmetrically for all the frame sizes, so that the drive and non-drive side end shields can be replaced and the direction of the rotor shaft group can be changed. By making this end shields and rotor shaft group modifications, the user can have a motor with terminal box is at the non-drive side keeping the distance C according to the standards. C B B C The raw materials that are used in our motors depending on the frame size are listed below. Frame Size Housing End Shield DE End Shield NDE Terminal Box & Cover Feet Fan Cover Fan Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Cast Iron Cast Iron Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Cast Iron Cast Iron Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Cast Iron Cast Iron Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Cast Iron Cast Iron Steel Sheet Steel Sheet Steel Sheet Steel Sheet Steel Sheet Steel Sheet Cast Iron Cast Iron Steel Sheet Steel Sheet Steel Sheet Steel Sheet Steel Sheet Steel Sheet Steel Sheet Steel Sheet Plastic Plastic Plastic Plastic Plastic Plastic Plastic Plastic 200 Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron Steel Sheet Plastic 225 Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron Steel Sheet Plastic Cast Iron Cast Iron Cast Iron Cast Iron Cast Iron Steel Sheet Plastic 09

12 Electrical Construction Standard ELK Motors have insulation Class F while the temperature rise is Class B. This means the motors will have a longer service life and work under hard conditions. Upon the customer's request, Class H insulation motors are manufactured. Electrical Connections Cable Gland and Blind Cap Frame Size Cable Glands Blind Cap M20x1,5 M16x1,5 M25x1,5 M25x1,5 2 x M32x1,5-2 x M40x1,5-2 x M50x1,5 - Terminal Connections Frame Size Terminal Size M4 M5 M6 M8 The motors shall be connected in star or delta according to rated voltage given in their nameplate and the network voltage that they will be connected. For phase to phase 400V supply the motors with 230/400V nameplate values shall be connected in star and the motors with 400/690V nameplates values shall be connected in delta. Star Connection Delta Connection Motors at 60Hz Network Standard ELK Motors that have been manufactured for 50 Hz power supply can be used at 60Hz network. The ratios given below indicate changes in the given rated values. 50 Hz Rated Voltage Hz Hz Rated Voltage Gerilim Rated Speed Rated Power Rated Torque Rated Current Starting Torque Break Down Torque Starting Current V 400V 400V 220V 380V 440V

13 Motors With Variable Speed Drives Standard ELK Motors are suitable for variable speed drives. The frequency range that the motor can be driven with their fan is given below with blue line. If the motor will be driven in a wider range then a separately driven fan is necessary. By using a separately driven fan, the motors can be driven in the range defined by red line. Load % M/M N %M/MN %M/MN Separately Driven Fan Frequency (Hz) Motors In Several Environmental Conditions ELK Motors are designed to operate at ambient temperature up to 40 C according to IEC Rated output will change at the % ratings given below for different ambient temperatures. Ambient Temperature <30 C 35 C 40 C 45 C 50 C 55 C 60 C % Power Ratio

14 Winding Insulation / Temperature Rise Classes All standard motors in the ELK Motor range have F (155 C) class electrical insulation system. However, by means of its superior design features, the temperature rise of all standard motors remain within the Class B temperature rise limits when operating under rated conditions. Depending on the safety margin of the temperature rise class provided, our motors can provide 15% higher rated output power with a service factor of 1.15 (SF). INSULATION CLASS Maximum Winding Temperature Tolerance Limits of Winding Temperature Ambient Temperature B 130 C 10 0 C 80 0 C 40 0 C F 155 C 10 0 C C 40 0 C H C 15 0 C 5 0 C 40 0 C B Class B insulation system is shown for referance purposes only. Class B insulation system is not used in ELK motors. F (Standard) H (Optional) Our standard motors have class F electrical insulation system. The maximum permissible winding temperature at 40 C ambient temperature is 155 C. H class insulation is provided on special request. At 40 C ambient temperature, the maximum permissible winding temperature is C Protection Classes IP55 (Standard) Limited protection against dust ingress and protected against low pressure water jets from any direction. IP56 Limited protection against dust ingress and protected against high pressure water jets from any direction. IP65 Totally protected against dust ingress and protected against low pressure water jets from any direction. IP66 Totally protected against dust ingress and protected against high pressure water jets from any direction.

15 Construction Types ELK Motors are manufactured according to International Mounting Standard IEC Mounting codes and diagrams according to IEC Horizontal Mounting Codes I II Vertical Mounting Codes I II IM B3 IM 1 IM V1 IM 3011 IM B5 IM 3001 IM V3 IM 3031 IM B14 IM 3601 IM V5 IM 1011 IM B7 IM 1061 IM V6 IM 1031 IM B6 IM 1051 IM V15 IM 2011 IM B8 IM 1071 IM V35 IM 2031 IM B34 IM 2101 IM B35 IM

16 Bearings Standard ELK Motors are equipped with ball bearings with ZZ shields as listed below, according to frame size. NU-NJ bearings are optional. Frame Size Drive End Bearing Non Drive End Bearing ZZ 6204 ZZ 6205 ZZ 6206 ZZ 6206 ZZ 6208 ZZ 6309 ZZ 6310 ZZ 6202 ZZ 6204 ZZ 6205 ZZ 6206 ZZ 6206 ZZ 6208 ZZ 6209 ZZ 6210 ZZ ZZ 62 ZZ ZZ 6213 ZZ 6315 ZZ 6215 ZZ Drive End Bearing Non Drive End Bearing 14

17 Radial Loads Radial Load (FR): Radial load can be calculated according to below written formulae. Calculated radial load must be below permissible radial loads given at tables. If above, please contact with us. Correction of Permissible Radial Load If the radial load is applied between points x and x corrected with the following formulae. 0 max, the permissible radial load can be P: Motor Power (kw) D: Pulley Diameter (mm) n: Motor speed (rpm) k: Radial load factor Spur Gears, chain drives with low speed = 2,1 Trigger Belts = 2,5 V type belts = 5 FR < Fr x : Calculated radial load must be below permissible radial loads given at tables. Fa: Axial load Fr 0: Permissible radial load at shaft spigot. Fr max: Permissible radial load at shaft end point. Permissible loads are calculated for L h bearing lifetimes according to ISO 281. h10 15

18 Radial Loads HORIZONTAL MOUNTING - Permissible Radial Loads Mounting Positions IM: B3, B5, B6, B7, B8, B14, B34, B35 Fa = 0 Frame Size 2 Poles 3000 rpm Poles 1500 rpm Poles 0 rpm Fr º Fr º Fr º Fr max Fr max Fr max Fa0 : Permissible axial load Fr : Radial load Fr0 : Permissible radial load at shaft spigot. Frmax: Permissible radial load at shaft end point. Permissible loads are calculated for L h h bearing lifetimes according to ISO

19 Axial Loads HORIZONTAL MOUNTING Permissible Axial Loads Mounting Positions IM: B3, B5, B6, B7, B8, B14, B34, B35 Push Pull Frame Size Fr = 0 Fr = Fr 0 Fr = Fr max Fr = 0 2 Poles 3000 rpm Poles 1500 rpm Poles 0 rpm Push Push Pull Pull Fa0 : Permissible axial load Fr : Radial load Fr0 : Permissible radial load at shaft spigot. Frmax: Permissible radial load at shaft end point. Permissible loads are calculated for L h h bearing lifetimes according to ISO

20 Axial Loads VERTICAL MOUNTING- Shaft Pointing Upwards Permissible Axial Loads Mounting Positions IM: V3, V6, V19, V35, V37 Fr = 0 Push Fr = Fr 0 Fr = Fr max Pull Fr = 0 Frame Size 2 Poles 3000 rpm Poles 1500 rpm Push Pull Poles 0 rpm Push Pull Fa0 : Permissible axial load Fr : Radial load Fr0 : Permissible radial load at shaft spigot. Frmax: Permissible radial load at shaft end point. Permissible loads are calculated for L h h bearing lifetimes according to ISO

21 Axial Loads VERTICAL MOUNTING-Shaft Pointing Downwards- Permissible Axial Loads Mounting Positions IM: V1, V5, V15, V17, V18 Frame Size Fr = 0 Push Fr = Fr 0 Fr = Fr max Pull Fr = 0 2 Poles 3000 rpm Poles 1500 rpm Poles 0 rpm Push Push Pull Pull Fa0 : Permissible axial load Fr : Radial load Fr0 : Permissible radial load at shaft spigot. Frmax: Permissible radial load at shaft end point. Permissible loads are calculated for L h h bearing lifetimes according to ISO

22 PRODUCT TYPE CODES

23 PRODUCT TYPE CODES 2 EL M 4 C FC EL M 4 C FC Motor Efficiency Classes 2: IE2 3: IE3 4: IE4 Basic Motor Type EL : Aluminum housing standard motors EG : Cast iron housing standard motors EC : Aluminum housing compact motors ED : Cast iron housing compact motors Frame Size: 71, 80, 90,, 1,,,, 200, 225, Height of the shaft axis from feet base of motor (mm) Housing Length S : Short M: Medium L : Long Number of Poles 2:2 poles 3000 rpm 4:4 poles 1500 rpm 6:6 poles 0 rpm D: dahlander 4/2 poles constant torque 1500/3000 rpm E: dahlander 4/2 poles constant torque 1500/3000 rpm F: dahlander 8/4 poles constant torque 750/1500 rpm G: dahlander 8/4 poles constant torque 750/1500 rpm S: seperate windings 6/4 poles 0/1500 rpm T: seperate windings /4 poles 500/1500 rpm U: seperate windings /2 poles 500/3000 rpm Z: poles 500 rpm Core Length: A, B, C, D, E Construction Types / Flange Types PD : B3 Foot Mounted FA : B5 Flange FC : B14 Flange FS : Special Flange PA : B35 PC : B34 PS : Foot mounted with special flange Y0..Y9: With flange for gearbox connection PX : Foot mounted without drive end shield XX : Without foot and drive end shield Z0-Z9: Foot mounted Yılmaz type Electrical Specifications AA..ZZ Voltage, Frequency and electrical features nd digit : Additional electrical features 0: Standard motor, basic version A: Motors with thermistor B: Motors with anti-condensation heater C: Motors with thermal switch K: Motors with thermistor anti-condensation heater 1 st digit: Voltage and Frequency A : 230/400V 50Hz B : 400/690V 50Hz C : 240/415V 50Hz D : 415/720V 50Hz E : 220/380V 60Hz Standard Power F : 380/660V 60Hz Standard Power G : 220V 60Hz H : 290/500V 50Hz I : 220/380V 60Hz 1,16 increased rated output power J : 380/660V 60Hz 1,16 increased rated output power Additional Motor Features : Standard Motor 21

24

25 IE2 MOTORS IE2

26 400/ /400 Voltage (V) Electrical Characteristics 400V 50Hz 3000 rpm Type 2EL071M2A 2EL071M2B 2EL080M2A 2EL080M2B 2EL090S2A 2EL090L2B 2ELL2B 2EL1M2A 2ELS2A 2ELS2B 2EGM2A 2EGM2B 2EGL2C 2EGM2A 2EG200L2A 2EG200L2B 2EG225M2B 2EGM2B Power Speed Current Rated Values Torque Power Factor Efficiency % η kw rpm A Nm Cos ϕ 4/4 3/4 1/2 IA /IN 0,37 0,55 0,75 1,10 1,50 2,20 0 4,00 5,50 7,50 11,00 15,00 18,50 22,00 30,00 37,00 45,00 55, ,90 1,27 1,67 2,36 3,17 4,48 5,80 7,50 10,20 13,60 19,60 26,90 32,20 39,00 1,26 1,88 2,51 3,69 4,98 7,35 9,88 13,13 17,90 24,50 35,73 48,80 60,19 71,10 0,80 0,82 0,83 0,84 0,83 0,85 0,88 0,89 0,88 0,90 0,90 0,89 0,91 0, ,00 96,63 0, ,00 119,20 0, ,40 144,70 0, ,50 176,80 0,90 Duty Cycle Insulation Class Temperature Rise Starting Values Current Torque : S1 (Continuous Operation) : F (155 C) : B (80 K) Break Down Torque Moment of Inertia B3 Motor Weight IE2 Sound Pressure Level M A /M N M K /M N kgm 2 kg db(a) 74,2 75,8 78,0 80,1 82,5 83,2 84,8 86,5 88,2 88,5 89,8 90,3 91,1 91,4 74,5 77,0 79,0 81,3 8 85,0 85,2 87,1 88,4 88,8 90,0 91,0 91,5 91,6 72,5 76,0 77,5 80,7 82,0 85,0 84,7 86,8 87,6 88,6 89,0 90,7 91,0 90,6 5,0 5,0 5,7 5,8 6,0 6,0 7,0 7,0 7,9 7,6 7,4 7,0 8,2 7,9 2,5 2,8 2,5 2,7 2,4 2,8 2,7 2,9 2,8 2,9 3,1 3,3 3,1 3,4 3,6 3,9 3,9 3,6 3,5 3,8 3,6 0, , , , , , , , , , , , , , ,5 6,3 8,7 9,7 14,1 15,5 20,8 25,7 41,0 45, ,4 92,7 92,2 8,0 2,9 3,1 0, ,7 93,2 9 8,4 3,1 3,3 0, ,2 93,5 9 8,6 2,7 3,7 0, ,3 93,6 93,1 7,9 2,7 3,6 0, / /400 Voltage (V) 400V 50Hz 1500 rpm Type 2EL071M4B 2EL071M4C 2EL080M4B 2EL080M4C 2EL090S4B 2EL090L4C 2ELL4B 2ELL4C 2EL1M4C 2ELS4B 2ELM4C 2EGM4B 2EGL4C 2EGM4B 2EGL4C 2EG200L4C 2EG225S4B 2EG225M4C 2EGM4C Duty Cycle Insulation Class Temperature Rise : S1 (Continuous Operation) : F (155 C) B (80 K) : IE2 Starting Rated Values Break Moment B3 Sound Values Down of Motor Pressure Power Power Speed Current Torque Factor Efficiency % η Current Torque Torque Inertia Weight Level kw rpm A Nm Cos ϕ 4/4 3/4 1/2 IA /IN M A /M N M K/M N kgm 2 kg db(a) 0,25 0,37 0,55 0,75 1,10 1,50 2,20 0 4,00 5,50 7,50 11,00 15,00 18,50 22, ,71 1,00 1,45 1,95 0 3,40 4,85 6,42 8,20 11,20 15,10 21,30 28,80 34,90 41,40 1,68 2,47 3,65 4,97 7,30 9,95 14,60 19,89 26,35 36,10 49,00 71,70 98, 0,60 143,40 0,69 0,70 0,71 0,70 0,75 0,77 0,78 0,79 0,81 0,81 0,81 0,83 0,83 0,84 0,84 74,0 76,1 77,1 79,6 81,4 82,8 84,3 85,5 86,8 87,7 88,7 89,8 90,6 91,2 91,6 73,5 75,5 76,7 79,2 81,4 8 85,3 85,7 87,4 88,6 89,0 90,3 91,3 91,5 91,7 70,5 71,5 75,0 77,0 80,5 82,0 84,2 84,6 86,5 88,0 89,0 89,5 90,9 91,4 91,5 4,4 4,6 5,2 5,2 5,6 6,0 6,0 6,3 6,6 6,7 7,0 6,9 6,9 6,9 7,1 2,0 2,0 2,0 2,0 2,2 2,3 2,4 2,4 2,5 2,7 2,4 2,5 3,1 3,2 3,2 3,3 3,4 3,2 3,3 3,2 0, , , , , , , , ,020 0, , , , ,11 0,900 5,9 6,7 9,7 10,5 14,4 17,2 22,7 24,2 32,0 47,8 54, , ,50 194,24 0,85 92,3 9 93,2 7,6 3,1 0, , ,00 239,50 0, ,8 93,8 7,8 3,1 0, , ,00 291,40 0,87 93,1 94,0 94,3 7,8 0, , ,50 355,40 0,89 93,5 94,3 94,4 7,9 3,2 0,

27 Electrical Characteristics 400V 50Hz 0 rpm 400/ /400 Voltage (V) Type Duty Cycle Insulation Class Temperature Rise : S1 (Continuous Operation) : F (155 C) : B (80 K) Starting Rated Values Break Moment B3 Sound Values Down of Motor Pressure Power Power Speed Current Torque Factor Efficiency % η Current Torque Torque Inertia Weight Level kw rpm A Nm Cos ϕ 4/4 3/4 1/2 IA /IN M A /M N M K/M N kgm 2 kg db(a) 2EL071M6B 2EL071M6C 2EL080M6A 2EL080M6B 2EL090S6A 2EL090L6B 2ELL6A 0,18 0,25 0,37 0,55 0,75 1,10 1, ,60 0,78 1,08 1,50 2,00 2,90 3,72 1,87 2,59 3,82 5,64 7,62 11,18 15,00 0,67 0,69 0,69 0,72 0,71 0,70 0,73 64,5 66,5 71,4 73,5 75,9 78,1 79,8 6 66,0 71,5 74,0 76,1 78,3 80,2 57,0 61,0 70,0 71,0 73,1 75,0 79,5 3,2 3,3 4,0 4,2 4,1 4,3 4,5 1,9 1,9 2,0 2,1 2,0 2,1 2,1 2,3 2,3 0, , , , , , , ,9 6,6 9,1 9,9 13,3 14,8 20, EL1M6A 2, ,32 21,90 0,73 81,8 82,0 81,5 5,3 2,1 2,7 0, ,0 56 2ELS6A ,85 29,60 0,76 83,3 84,0 8 5,6 2,0 2,8 0, ,0 60 2ELM6B 4, ,80 39,38 0,77 85,2 85,7 85,3 5,2 2,1 0, ,0 60 2ELM6C 5,50 965,00 54,40 0,77 86,0 87,2 87,0 5,7 2,1 2,7 0, ,0 60 2EGM6B 7, ,30 73,68 0,76 87,2 88,1 87,7 5,6 2,4 2,7 0, EGL6D 11, ,95 108,30 0,78 88,7 90,0 89,9 6,0 2,5 2,9 0, EGL6D 15, ,00 146,90 0,78 89,7 90,5 90,2 6,2 2,5 2,9 0, EG200L6B 18, ,50,80 0,81 90,4 90,5 90,7 6,3 2,5 0, EG200L6C 22, ,80 0,81 91,1 91,3 91,2 6,2 2,5 0, EG225S6B 30, ,60 292,20 0,82 91,7 91,8 90,8 6,6 2,7 0, EGM6B 37, ,60 359,80 0,83 92,3 9 92,5 6,8 2,7 2,8 0, IE2 25

28 Electrical Characteristics 400V 50Hz 3000 rpm Voltage (V) Type Duty Cycle Insulation Class Temperature Rise : S1 (Continuous Operation) : F (155 C) : F (105 K) Compact IE2 Starting Rated Values Break Moment B3 Sound Values Down of Motor Pressure Power Power Speed Current Torque Factor Efficiency % η Current Torque Torque Inertia Weight Level kw rpm A Nm Cos ϕ 4/4 3/4 1/2 IA /IN M A /M N M K/M N kgm 2 kg db(a) 230/ /690 2EC071M2C 0, ,70 2,55 0,82 77,7 78,4 76,5 5,0 3,1 0, ,3 54 2EC080M2C 1, ,18 5,04 0,84 81,3 82,7 81,8 5,6 2,7 3,2 0,004 11,1 55 2EC090L2C ,10 10,05 0,84 84,6 85,6 85,0 6,2 3,3 0, ,3 60 2ECL2C 4, ,75 13,29 0,87 85,8 86,8 86,2 6,5 2,7 3,5 0, ,5 63 2EC1M2C 5, ,35 18,08 0,88 87,0 87,8 87,5 7,3 3,5 0, ,5 66 2ECS2C 11, ,73 35,97 0,90 89,4 90,5 90,6 8,1 3,6 0,02 52,0 68 2EDL2D 22, ,40 71,50 0,91 91,5 91,8 91,4 8,3 3,1 3,9 0, EDM2B 30, ,70 97,10 0,89 92,2 92,7 92,3 8,2 2,9 3,8 0, ED200L2C 45, ,80 145,20 0,90 92,9 93,2 9 8,1 2,7 2,9 0, ED225M2C 55, ,70 177,20 0,90 93,2 93,3 93,3 7,8 2,7 2,9 0, EDM2C 75, ,0 241,20 0,91 93,8 93,9 93,5 7,0 2,3 2,5 0, V 50Hz 1500 rpm Voltage (V) Type Duty Cycle Insulation Class Temperature Rise : S1 (Continuous Operation) : F (155 C) : F (105 K) Compact IE2 Starting Rated Values Break Moment B3 Sound Values Down of Motor Pressure Power Power Speed Current Torque Factor Efficiency % η Current Torque Torque Inertia Weight Level kw rpm A Nm Cos ϕ 4/4 3/4 1/2 IA /IN M A /M N M K/M N kgm 2 kg db(a) 230/ /690 2EC071M4D 0, ,45 3,74 0,72 77,1 77,5 75,0 4,3 2,3 2,5 0, ,7 46 2EC080M4D 2EC090L4D 1,10 2, ,95 7,32 14,69 0,74 0,76 81,4 84,3 79,3 83,7 77,0 81,0 5,0 5,5 2,2 2,9 0, , ,9 18, ECL4D 4, ,25 26,71 0,81 86,6 87,1 86,0 5,9 2,4 3,1 0, ,1 54 2EC1M4D 5, ,06 36,47 0,83 87,7 88,5 87,5 6,5 2,4 3,1 0, ,5 59 2ECM4E 11, , ,83 89,8 90,1 89,3 7,2 2,8 3,2 0, EDL4E 2EDL4D 2ED200L4D 2ED225M4D 2EDM4D 18,50 30,00 37,00 55,00 75, ,30 56,70 66,20 96,40 9,6 1,80 196,23 240,37 357,30 485,60 0,83 0,83 0,87 0,88 0,89 91,2 92,3 92,7 93,5 94,0 91,8 92,8 93,5 93,7 94,9 91,5 92,8 93,6 93,9 95,2 6,6 6,8 7,6 6,9 8,0 2,7 2,8 2,8 3,2 3,2 3,2 2,9 2,9 0, , , ,44 0,

29 elkmotor.com.tr

30

31 IE3 MOTORS IE3

32 Electrical Characteristics 400V 50Hz 3000 rpm 400/ /400 Voltage (V) Type 3EL071M2B 3EL071M2C 3EL080M2B 3EL080M2C 3EL090S2B 3EL090L2C 3ELL2C 3EL1M2C 3ELS2B 3ELS2C 3EGM2B 3EGM2C 3EGL2D 3EGM2B 3EG200L2B 3EG200L2C 3EG225M2C 3EGM2C Power Speed Current kw rpm A Nm Cos ϕ 4/4 3/4 1/2 IA /IN 0,37 0,55 0,75 1,10 1,50 2,20 0 4,00 5,50 7,50 11,00 15,00 18,50 22,00 30,00 37,00 45,00 55, ,86 1,19 1,59 2,26 2,97 4,25 5,58 7,28 9,90 13,20 19,70 25,90 31,70 38,10 52, ,60 93,30 Rated Values Torque 1,25 1,86 2,49 3,64 4,94 7,24 9,83 13,10 17,83 24,32 35,60 48,55 60,00 71,05 96,46 119,00 144,40 176,90 Power Factor 0,81 0,84 0,84 0,85 0,86 0,87 0,89 0,90 0,90 0,91 0,88 0,91 0,91 0,90 0,89 0,91 0,91 0,90 Efficiency % η 76,6 79,4 80,7 82,7 84,8 85,9 87,1 88,1 89,2 90,1 91,2 91,9 92,4 92,7 93,6 93,7 94,3 94,4 77,0 80,2 82,0 8 85,4 86,8 87,6 88,8 89,0 90,5 91,0 92,1 92,7 92,9 93,8 93,8 94,6 94,8 75,0 78,8 81,5 82,4 84,2 86,1 86,9 88,2 88,6 89,7 90,5 91,6 92,3 92,0 93,6 93,4 94,0 94,5 Duty Cycle Insulation Class Temperature Rise 6,0 6,1 6,7 6,8 7,6 7,2 7,9 7,5 8,9 8,4 8,0 8,9 8,9 8,6 8,9 9,3 9,8 8,9 Starting Values Current Torque M A /M N M K/M N kgm 2 kg db(a) 2,8 2,9 3,1 3,1 2,9 3,1 3,1 3,2 3,2 3,5 3,3 : S1 (Continuous Operation) : F (155 C) : B (80 K) Break Down Torque 3,3 3,6 3,8 3,9 3,8 4,1 3,9 3,9 4,0 3,9 4,2 4,2 3,9 3,5 3,4 3,9 3,4 Moment of Inertia 0, , , ,004 0, , , , , ,02 0, , , , , , , ,38000 B3 Motor Weight 6,2 7,2 9,6 10,9 15,6 17,0 23,3 29,1 44,4 51, IE3 Sound Pressure Level V 50Hz 1500 rpm Duty Cycle Insulation Class Temperature Rise : S1 (Continuous Operation) : F (155 C) : B (80 K) IE3 400/ /400 Voltage (V) Type 3EL071M4C 3EL071M4D 3EL080M4C 3EL080M4D 3EL090S4C 3EL090L4D 3ELL4C 3ELL4D 3EL1M4D 3ELS4C 3ELM4D 3EGM4C 3EGL4E 3EGM4C 3EGL4D Starting Rated Values Break Moment B3 Sound Values Down of Motor Pressure Power Power Speed Current Torque Factor Efficiency % η Current Torque Torque Inertia Weight Level kw rpm A Nm Cos ϕ 4/4 3/4 1/2 IA /IN M A /M N M K/M N kgm 2 kg db(a) 0,25 0,37 0,55 0,75 1,10 1,50 2,20 0 4,00 5,50 7,50 11,00 15,00 18,50 22, ,67 0, ,77 2,46 3,30 4,65 6,26 8,05 10,65 14,40 21,00 28,70 35,00 41,40 1,66 2,46 3,62 4,94 7,25 9,88 14,49 19,76 26,16 36,00 48,90 71,46 97,45 119,80 142,92 0,71 0,70 0,73 0,74 0,76 0,77 0,79 0,79 0,81 0,83 0,83 0,83 0,82 0,82 0,82 76,0 78,5 80,8 82,5 84,5 85,3 86,7 87,7 88,6 89,6 90,4 91,5 92, ,4 78,2 80,4 82,3 84,3 85,2 87,2 88,0 88,4 90,2 90,4 92,1 92,4 93,2 93,7 71,5 75,0 77,0 80,0 82,0 8 86,0 87,0 87,5 90,0 89,4 91,7 91,9 92,9 93,7 5,4 5,5 5,9 6,2 7, ,2 7,2 7,4 7,4 7,9 7,6 7,8 7,7 8,0 2,2 2,2 2,1 2,5 2,8 2,8 2,8 2,8 2,8 2,8 2,8 3,1 3,1 3,4 3,6 3,8 3,6 3,6 3,8 3,4 3,8 3,3 3,6 3,3 3,4 0, , , , , , , , , , , , , ,900 0, ,8 7,5 10,5 11,6 16,3 18, ,7 33,9 53,4 59, EG200L4D 3EG225S4C 3EG225M4D 3EGM4D 30,00 37,00 45,00 55, ,50 65,70 80,00 95,30 194,20 239,00 290,90 354,40 0,85 0,87 0,86 0,88 93,6 93,9 94,2 94,6 94,1 94,5 94,7 95,1 94,0 94,5 94,7 95,2 8,0 8,3 8,6 8,7 3,2 3,3 3,3 3,4 3,3 3,2 3,2 0, , ,44 0,

33 Electrical Characteristics 400V 50Hz 0 rpm 400/ /400 Voltage (V) Type 3EL071M6C 3EL071M6D 3EL080M6B 3EL080M6C 3EL090S6B 3EL090L6C 3ELL6B 3EL1M6B 3ELS6B 3ELM6C 3ELM6D 3EGM6D 3EGL6E 3EGL6E 3EG200L6C 3EG200L6D 3EG225S6C 3EGM6C 0,18 0,25 0,37 0,55 0,75 1,10 1,50 2,20 0 4,00 5,50 7,50 11,00 15,00 18,50 22,00 30,00 37, ,55 0,77 1,03 1,47 1,96 2,75 3,50 4,95 6,55 8,52 11,55 15,55 22,90 30,80 36,40 42,50 57,60 68,80 1,85 2,57 3,80 5,62 7,58 11,20 15,00 21,70 29,40 39,40 54,15 73,68 108,07 146,92,80 214,80 290,80 357,60 0,69 0,67 0,70 0,70 0,70 0,71 0,75 0,76 0,77 0,78 0,78 0,78 0,77 0,77 0,80 0,81 0,81 0,83 68,0 70,0 74,0 77,2 78,9 81,0 82,5 84,3 85,6 86,8 88,0 89,1 90,3 91,2 91,7 92,2 92,9 93,4 67,4 69,7 73,8 77,3 79,2 80,8 82,7 84,5 85,5 87,0 88,9 89,4 90,9 91,6 91,8 92,9 92,9 93,6 6 66,0 70,0 74,4 77,6 79,4 81,4 83,5 84,5 85,5 88,5 88,4 90,5 91,0 91, ,5 Duty Cycle Insulation Class Temperature Rise 3,6 3,6 4,4 4,3 4,7 5,0 5,3 5,5 6,2 6,2 6,2 6,3 6,6 6,7 6,1 6,2 6,6 6,8 2,0 2,2 2,1 2,2 2,2 2,2 2,1 2,2 2,1 2,2 2,2 2,9 2,9 2,7 : S1 (Continuous Operation) : F (155 C) : B (80 K) 2,4 2,5 2,7 2,7 2,7 2,8 3,3 3,1 2,7 2,7 2,8 0, , , , , , , ,00 0, , , , , , ,36 0, , , ,7 7,5 9,8 10,6 14,6 17,0 22,5 27,2 46,5 51,0 56, IE3 Starting Rated Values Break Moment B3 Sound Values Down of Motor Pressure Power Power Speed Current Torque Factor Efficiency % η Current Torque Torque Inertia Weight Level kw rpm A Nm Cos ϕ 4/4 3/4 1/2 IA /IN M A /M N M K/M N kgm 2 kg db(a)

34

35 DIMENSIONS

36 B3 Construction Type Frame Size Number of Poles [1] [2] D E L AC H HE HD F GA DB C ØK B BB HA AA A AB M S 090L 1 S M M L M L , , ,5 51,5 M6 M8 M8 M10 M10 M M M16 M16 M16 M ,5 14,5 14,5 14, ,5 49, M , , S ,5 540, M , M ,5 540, M , M M , [1] Tolerance j6 up to 28mm, k6 from 28 to 48mm, m6 over 48mm TS EN [2] Tolerance -0.5mm TS EN 50347

37 B5- B35 Construction Types LA ~L M F M HE GA DB ØP ØN ØD ØAC HA S H ~HD S T E C B BB ØK AA A AB Frame Size Number of Poles D [1] [2] [3] E N P T LA L AC S M H HE HD F GA DB C ØK B BB HA AA A AB S 090L 1 S M M L M L , , , , , , , , , , , , , , M , ,5 225S , ,5 540, M , M , ,5 540, M , M , M , , ,5 51,5 M5 M6 M8 M8 M10 M10 M M M16 M16 M16 M , , ,5 49,5 1 14, , [1] Tolerance j6 up to 28mm, k6 from 28 to 48mm, m6 over 48mm TS EN [2] Tolerance j6 up to mm, h6 over mm TS EN [3] Tolerance -0.5mm TS EN

38 B14- B34 Construction Types Frame Size Number of Poles [1] [2] [3] D N P E T LA L AC S M H HE HD F GA DB C ØK B BB HA AA A AB S 090L 1 S M M L , , , , , , ,5 3,5 3,5 3, M6 M6 M8 M8 M8 M8 M10 M10 M M , M5 M6 M8 M8 M10 M10 M M M16 M ,5 14, ,5 49, [1] Tolerance j6 up to 28mm, k6 over 28mm TS EN [2] Tolerance j6 TS EN [3] Tolerance -0.5mm TS EN 50347

39 ADDITIONAL INFORMATION

40 Nameplate Description 1. Rated Voltage 2. Motor Type: 3 Phase Asynchronous 3. Motor Code 4. Efficiency Class (IEC ) 5. Manufacture Standard 6. Power Factor 7. Duty Cycle 8. Protection Class 9. Motor Weight 10. Insulation Class 11. Rated Current. Bearing Type 13. Serial Number 14. Efficiency 15. Output Power 16. Speed 17. Frequency 18. Production Date The nameplate shows the identification, and the most important technical data. The nameplate also defines the limits of proper usage, and manufacturing year of the motors. The first two digits in the serial number, shows the manufacturing year. For example, 17XXXXXXX shows that the product is manufactured in

41 Spare Parts 2EL, 3EL, 2EC Series motors consist of the following main parts; 1. Flange B5 2. Flange B14 3. End Shield (DE) 4. Shaft sealing 5. Screw 6. Bearing 7. Shaft 8. Key 9. Stator Core 10. Housing 11. Screw. Mounting foot 13. Screw 14. Lifting Lug 15. Terminal 16. Terminal Box 17. Terminal Box Cover 18. Bolt 19. Cable Gland 20. Bearing 21. Spring Washer 22. End Shield (NDE) 23. Fan 24. Fan cover 25. Squirrel cage rotor 26. Winding When ordering spare parts, the motor serial number, full type designation, and product code, as stated on the nameplate, must be specified. For field service, spare parts and additional information, please contact with us. 39

42 PTC Thermistor and Thermal Switch PTC Thermistor If the motor is exposed to excessive load, the internal resistance of the thermistor attached to the motor windings increases due to the heating of the motor windings and opens the circuit when the insulation class limit value is reached. This prevents the winding from being damaged by cutting off the current in the windings. Only can be used with an electronic circuit. Thermal Switch When the motor is overloaded winding temperature exceeds the insulation class limit value, and the thermal switch assembled to the winding opens the circuit. In many applications, thermal switch can be connected in series to the main contactor coil. Depending on the opening of the thermal switch, the main contactor is released and damage to the motor is prevented Anti-Condensation Heater and Drain Hole Water condensation inside the motor can occur in high humidity environments. To prevent this, heaters anti-condensation heaters are assembled to the motor windings to maintain a certain temperature. In addition, drain holes are opened to prevent water from accumulating in the motor body in the event of water condensation inside the motor. Non Drive End Shaft Extension and Canopy 40 Non Drive End Shaft Extension Non drive end shaft is used when it is desired to transfer the motor power to a second load or to manually rotate it when the motor is not energized. Canopy It is used for operation in the outside environment where the motor fan is pointing upwards. This prevents the rainwater from entering the motor housing.

43 Brake, Hand Release, Separately Driven Fan Encoder and Backstop Electromagnetic Brake For each motor size we have the option of electromagnetic brake. Brakes with 24 Volt, 230 Volt and 400 Volt DC from 5Nm to 0Nm are alternatively can be used as needed. Brake with Hand Release Hand release on the brake is used to release the system when the power is cut off or the power is not turned on. Separately Driven Fan Separately driven fan is used particularly in applications where the motor is driven by variable speed drives to keep the air flow at a constant level. Separately Driven Fan with Encoder In applications where synchronous operation is desired, encoder application is used. The motor fan cannot be used since the encoder is mounted on the non drive end cover. For this reason, the motor is cooled by a separately driven fan. Separately driven fan with brake and encoder In applications where both brake and synchronous operation are desired, brake, encoder and separately driven fan options are all mounted to the non drive side of the motor. Backstop Backstop is used when the motor should rotate only in one direction and the motor should not rotate in the other direction. The backstop option in the fan cover is widely used. 41

44 NOTES

45 NOTES

46 NOTES

47 aö

48 Sales Office: Factory (Headquarters): Atatürk Mah. Lozan Cad. No: 17, Esenyurt / İSTANBUL Phone: Fax: I elkmotor@elkmotor.com.tr G.O.Paşa Mah. 1. Cad. 2. Organize Sanayi Bölgesi No: Çerkezköy / TEKİRDAĞ Phone: Fax: