Price List 2018 Hire Equipment
|
|
- Abner Lambert
- 5 years ago
- Views:
Transcription
1
2 Hire the equipment as you need it, instead of tying up capital unnecessarily. When equipment is only required for short periods, there is understandable opposition to making any costly investment. Hiring the equipment is an economical and flexible alternative. Whenever you need a flushing unit, test equipment or a mobile filtration system it s there ready for you! All units are maintained and checked regularly and are therefore always ready for operation. Our specialists will be pleased to advise you from the outset on selecting the best unit for your application. We will ensure that the hire equipment will be available on schedule, and therefore that your project runs smoothly. Equipment marked * can only be hired together with personnel at the current chargeable rate. Consumables such as filter elements are not included in the hire charge. The hire period starts from the day following collection (by customer or carrier) from our premises and ends on the day before return to our premises. The service inspection charges listed include testing and cleaning of the hire equipment concerned. If any damage is found which can be attributed to incorrect handling, an invoice will be issued for the costs of the repair. Note: The equipment listed is only available for hire. There is no provision for purchase or hire purchase. Address / Contact for HYDAC / Price List / HYDAC Service GmbH Werk 13 Friedrichsthaler Str Neunkirchen-Heinitz Tel.: +49 (0) Fax: +49 (0) service@hydac.com Internet: 1
3 The following equipment is available from the HYDAC Servicenter: Unit Stat-Free Technology Purpose Page OF7 MFU-10 OF5 OFU03 OFU10 OFU20 with BSP ports Filtromat, portable, 15 l/min, 3.5 bar Mobile Filtration Unit, portable with integrated oil cleanliness sensor 10 l/min, 4 bar Filtromat, mobile, 40 l/min, 4.5 bar Filter Pump Transfer Unit, mobile, 30 l/min, 10 bar Filter Pump Transfer Unit, mobile, 100 l/min, 16 bar Filter Pump Transfer Unit, mobile, 200 l/min, 16 bar Filtration of the medium when filling systems or when transferring fluids 4 Filtration and online measurement of solid contamination when filling systems or when 4 transferring fluids Filtration of the medium when filling systems or when transferring fluids 4 Filtration of the medium when filling systems or when transferring fluids 5 Filtration of the medium when filling systems or when transferring fluids 5 Filtration of the medium when filling systems or when transferring fluids 5 MFR-TRIFIL 285 * Filter Pump Transfer Unit, mobile, 285 l/min, 10 bar Filtration of the medium when filling systems or when transferring fluids 6 NHY-X/ DUO * Filter Pump Transfer & Heater Unit, mobile, l/min, 16 bar Filtration of the medium when filling systems or when transferring fluids 6 HY-Swiss 60-1 Compressed air operated, portable nitrogen charging and testing unit Charging and topping up gas pre-charge pressures in individual accumulators, static pressure testing of fittings 7 N2S-V Portable nitrogen charging unit with oil supply unit Charging and topping up gas pre-charge pressures in individual accumulators 7 N2S-F Mobile nitrogen charging unit Charging and topping up gas pre-charge pressures in accumulator stations 7 FAM-5 FluidAqua Mobil with heater and Aquasensor 5 l/min, 8 bar Offline dewatering and filtration 8 FAM-10/15 FluidAqua Mobil with heater and Aquasensor 15 l/min, 4.5 bar Offline dewatering and filtration 8 FAM-45 FluidAqua Mobil with heater and Aquasensor 45 l/min, 4.5 bar Offline dewatering and filtration 9 FAM-60 FluidAqua Mobil with heater, CS sensor and Aquasensor, 60 l/min, 4.5 bar Offline dewatering and filtration 9 FAM-75 FluidAqua Mobil with heater and Aquasensor 75 l/min, 4.5 bar Offline dewatering and filtration 10 HYDAC / Price List / 2
4 The following equipment is available from the HYDAC Servicenter: VEU-F Varnish Elimination Unit, mobile oil conditioning unit Removal of oil ageing products (varnish) from mineral oils 11 SPA 500 * Flushing unit 380 l/min, 50 bar Cleaning the hydraulic system following changes to pipework, alterations or where there is contamination caused by wear or damage 12 Modular Flushing Unit Modular flushing unit consisting of a Modular Tank Unit MTU-4 and 1 to 4 Modular Pump Unit MPU-400 Cleaning the hydraulic system following changes to pipework, alterations or where there is contamination caused by wear or damage 13 FCU 1310 FCU 2210 Clogging Indicator Test Unit MCU-20 Fluid Control Unit, portable oil analysis unit with integrated pump and Aquasensor Fluid Control Unit, portable oil analysis unit with integrated pump Pneumatic test unit for filter clogging indicators Mobile Commissioning Unit, 20 l/min, 200 bar Continuous online measurement of solid contamination and detection of water in the fluid 14 Continuous online measurement of solid contamination in the fluid, directly on the pressure line Function test of all HYDAC clogging indicators at installation location Commissioning unit for pre-commissioning, installing cylinders and systems CTU-1040 ContaminationTest Unit, mobile Analysis equipment for determining the technical 15 cleanliness of components and systems Hose boxes Additional hoses for filtration + flushing units HYDAC / Price List / 3
5 OF7 Filtromat, portable, 15 l/min, 3.5 bar 0.18 kw 1 x 230 V - 50 Hz / safety plug Included suction and pressure hose 2.3 m, each with lance 15 kg 550 x 200 x 400 mm 1 x 0160 MA XXX BN Service inspection charge Mobile Filtration Unit, portable with integrated oil cleanliness MFU-10 sensor 10 l/min, 4 bar 0.25 kw 1 x 230 V - 50 Hz / safety plug Included suction and pressure hose 2.5 m, each with lance 16.5 kg 450 x 150 x 500 mm 1 x NX9DMxxx-F Service inspection charge Filtromat, mobile, OF5 40 l/min, 4.5 bar 1.5 kw 3 x 400 V - 50 Hz / CEE plug 16 A Included suction and pressure hose 3 m, each with lance 75 kg 900 x 550 x 850 mm 1 x 1300 R XXX ON /-SFREE-KB Service inspection charge HYDAC / Price List / 4
6 OFU03 Filter Pump Transfer Unit, mobile, 30 l/min, 10 bar 0.75 kw 3 x 400 V - 50 Hz / CEE plug 16 A Included suction and pressure hose 4.0 m 155 kg 900 x 650 x 900 mm 1 x 1300 R XXX ON /-SFREE-KB Service inspection charge OFU10 Filter Pump Transfer Unit, mobile, 100 l/min, 16 bar 4.0 kw 3 x 400 V - 50 Hz / CEE plug 16 A Included suction and pressure hose 2.5 m / 4.0 m, with suction lance 155 kg 900 x 650 x 900 mm 1 x 1300 R XXX ON /-SFREE-KB Service inspection charge OFU20 with BSP ports Excluding hoses Please order separate hose box (see Page 12) Filter Pump Transfer Unit, mobile, 200 l/min, 16 bar 5.5 kw 3 x 400 V - 50 Hz / CEE plug 16 A 170 kg 950 x 650 x 1,100 mm 1 x 1300 R XXX ON /-SFREE-KB Service inspection charge HYDAC / Price List / 5
7 Filter Pump Transfer Unit, mobile, cascade filtration MFR-TRIFIL 285 * via 3 filters in series 285 l/min, 10 bar 7.5 kw 3 x 400 V - 50 Hz / CEE plug 32 A Excluding hoses Please order separate hose box (see Page 12) 360 kg 1,600 x 1,000 x 1,750 mm 3 x 1300 R XXX ON /-SFREE-KB Service inspection charge Filter Pump Transfer & Heater NHY-X/ DUO * Unit, mobile, l/min, 16 bar - Unit 7.5 kw - Heater 18 kw - Unit 3 x 400 V - 50 Hz / CEE plug 32 A - Heater 3 x 400 V - 50 Hz / CEE plug 63 A Excluding hoses Please order separate hose box (see Page 12) 850 kg 2,250 x 800 x 1,850 mm 2 x 1300 R XXX ON /-SFREE-KB Service inspection charge HYDAC / Price List / 6
8 HY-Swiss 60-1 Nitrogen charging and testing unit Max. charge pressure 500 bar Compressed air drive bar Compressed air inlet Coupling nipple DN6 Included suction and pressure hose 1.5 m 19.5 kg 380 x 280 x 360 mm Service inspection charge N2S-V Portable nitrogen charging unit with oil supply unit for charging individual accumulators Max. charge pressure 300 bar 1.1 A 3 x 400 V - 50 Hz / CEE plug 16 A Included suction and pressure hose 4 m - Compressor - Oil supply unit 35 kg + 46 kg 800 x 300 x 350 mm 600 x 360 x 620 mm Service inspection charge Mobile nitrogen charging unit N2S-F for charging accumulator stations Max. charge pressure 300 bar 5.5 kw 3 x 400 V - 50 Hz / CEE plug 16 A Included suction and pressure hose 4 m 380 kg 1,100 x 825 x 1,400 mm Service inspection charge HYDAC / Price List / 7
9 FluidAqua Mobil FAM-5 with heater and Aquasensor 5 l/min, 8 bar 1 kw 3 x 400 V - 50 Hz / CEE plug 16 A Included suction and pressure hose 5 m Optional: Hose extension Delivery in transport box Transport weight Transport dimensions (WxDxH) 120 kg 620 x 610 x 1,250 mm N5DMxxx TBD TBD Service inspection charge FluidAqua Mobil FAM-10/15 with heater and Aquasensor 15 l/min, 4.5 bar 4.9 kw 3 x 400 V - 50 Hz / CEE plug 16 A Included suction and pressure hose 5 m Optional: Hose extension Delivery in transport box Transport weight Transport dimensions (WxDxH) 300 kg 620 x 1,010 x 1,760 mm 1 x N5DM002/-SFREE 485 kg 1,000 x 1,350 x 2,100 mm Service inspection charge HYDAC / Price List / 8
10 FluidAqua Mobil FAM-45 with heater and Aquasensor 45 l/min, 4.5 bar 13.5 kw 3 x 400 V - 50 Hz / CEE plug 32 A Included suction and pressure hose 5 m Optional: Hose extension 430 kg 690 x 1,375 x 1,877 mm 1 x N10 DM 005 Delivery in transport box Transport weight Transport dimensions (WxDxH) 725 kg 1,150 x 2,050 x 2,100 mm , Service inspection charge FluidAqua Mobil with heater, FAM-60 CS sensor and Aquasensor, 60 l/min, 4.5 bar 19.5 kw 3 x 400 V - 50 Hz / CEE plug 63 A Included suction and pressure hose 5 m Optional: Hose extension Delivery in transport box Transport weight Transport dimensions (WxDxH) 550 kg 850 x 1800 x 1960 mm 1 x 1300 R 005 ON /-SFREE 950 kg 1,250 x 2,400 x 2,250 mm , Service inspection charge HYDAC / Price List / 9
11 FluidAqua Mobil FAM-75 with heater and Aquasensor 75 l/min, 4.5 bar 25.5 kw 3 x 400 V - 50 Hz / CEE plug 63 A Included suction and pressure hose 5 m Optional: Hose extension Delivery in transport box Transport weight Transport dimensions (WxDxH) 590 kg 850 x 1,800 x 1,960 mm 1 x 1300 R 005 ON /-SFREE 1,185 kg 1,250 x 2,400 x 2,180 mm , Service inspection charge HYDAC / Price List / 10
12 VEU-F Mobile Varnish Elimination Unit with compressor cooler 1 l/min, 6 bar 6.5 kw 3 x 400 V - 50 Hz / CEE plug 32 A Included suction and pressure hose 2.5 m suction hose, 5 m pressure hose 335 kg 1,434 x 825 x 1,759 mm 4 x N15DM Service inspection charge HYDAC / Price List / 11
13 SPA 500 * Flushing unit 380 l/min, 50 bar 29 kw / 11 kw 3 x 400 V - 50 Hz / CEE plug 32 A 3 x 400 V - 50 Hz / CEE plug 63 A Excluding hoses Please order separate hose and adapter box (see Page 12) 1,400 kg 2,100 x 1,200 x 1,800 mm 1x 0240 D XXX ON /-SFREE 2x 0660 R XXX ON /-SFREE 1x 0330 R XXX ON /-SFREE Service inspection charge HYDAC / Price List / 12
14 Modular Flushing Unit Consisting of a Modular Tank Unit MTU-4 and 1 to 4 Modular Pump Unit MPU-400 Modular Tank Unit MTU-4 16 kw 3 x 400 V - 50 Hz / CEE plug 63 A Tank size 3100 l Heating capacity 9.8 kw Excluding hoses Please order separate hose and adapter box (see Page 16) 4,000 kg 3,550 x 2,350 x 2,430 mm 1 x 0950 R XXX ON/-SFREE 4 x 2600 R XXX ON/-SFREE 1 x 0330 R XXX ON/-SFREE , Service inspection charge Modular Pump Unit MPU kw 3 x 400 V - 50 Hz / CEE plug 63 A Pump capacity l/min / bar Excluding hoses Please order separate hose and adapter box (see Page 16) 600 kg 1,600 x 900 x 1,700 mm 1 x 0660 D XXX ON/-SFREE , Service inspection charge HYDAC / Price List / 13
15 FCU Fluid Control Unit, portable oil analysis unit with integrated pump and Aquasensor 0.1 kw V AC / 50/60 Hz / 1 phase / 5000 ma 13 kg 410 x 330 x 230 mm Service inspection charge FCU Fluid Control Unit, portable oil analysis unit with integrated pump 0.1 kw 1 x 230 V - 50 Hz / power supply adapter 15 kg 420 x 150 x 450 mm Service inspection charge Clogging Indicator Test Unit Test pressure Power supply Pneumatic test unit for filter clogging indicators 9 bar Not needed 2.5 kg 340 x 270 x 140 mm Service inspection charge HYDAC / Price List / 14
16 MCU-20 Included hose (A+B) 5m Mobile Commissioning Unit, 20 l/min, 200 bar 7.5 kw 3 x 400 V - 50 Hz / CEE plug 32 A 150 kg 620 x 1,000 x 1,500 mm 1 x 0165 R 10 ON /-SFREE Service inspection charge CTU-1040 Compressed air supply Delivery in transport box Transport weight Transport dimensions (WxDxH) ContaminationTest Unit, mobile 0.6 kw 1 x 230 V - 50 Hz / safety plug 60 l/min, 6 bar (required on site) 270 kg 985 x 850 x 1,500 mm 320 kg 1,300 x 1,200 x 2,100 mm , Service inspection charge HYDAC / Price List / 15
17 Hose box - cleaning Hoses for filtration units OFU20 / MFR-TRIFIL285 / NHY-X/ DUO Contains: - 1 x suction hose BSP 3" - length 6,000 mm - 2 x pressure hose BSP 2" - length 10,000 mm 200 kg 1,200 x 800 x 1,000 mm Service inspection charge Hose and adapter box - flushing Contains: - 10 x hose 38 S - length 5,000 mm - 10 x hose 20 S - length 5,000 mm - Various adapters (reducing adapters, couplings, etc.) Hoses and adapters for flushing units SPA500 each 200 kg 1,200 x 800 x 1,000 mm Service inspection charge HYDAC / Price List / 16
Price List 2018 In-House Repairs and Calibrations
In-House Repairs and Calibrations Contents Page 2: Services Page 3: Repair and Certification Packages for Accumulators Page 4: Repair Packages for Compact Hydraulics Power Units Page 5: Repair and Inspection
More informationPrice List 2013 In-House Repairs and Calibration
In-House Repairs and Calibration Contents Page 2: Services Page 3: Repair and Certification Packages for Accumulators Page 4: Repair packages for Compact Hydraulics Power Units Page 5: Repair and Inspection
More informationMobile Filter Unit MFU-15
Mobile Filter Unit MFU-15 Description The MFU 15 MobileFiltration unit is used as a portable service unit for filling hydraulic systems, flushing small hydraulic systems as well as for cleaning in bypass
More informationSpare parts list Return line filter RFM with 2-hole attachment
Spare parts list Return line filter with 2-hole attachment Tank-top mounted version: up to 200 l/min, up to 10 bar 75 90 150 165 185 195 1. MAINTENANCE 1.1 GENERAL Please follow the maintenance instructions!
More informationHYDAC nitrogen charging units facilitate fast and cost effective filling or topping up of the required gas pre charge pressure in bladder, diaphragm
HYDAC nitrogen charging units facilitate fast and cost effective filling or topping up of the required gas pre charge pressure in bladder, diaphragm and piston accumulators. They guarantee optimum use
More informationSpare Parts List Tank-Top Return Line Filter RFN with Elements to DIN up to 630 l/min, up to 10 bar
Spare Parts List Tank-Top Return Line Filter RFN with Elements to DIN 24550 up to 630 l/min, up to 10 bar RFN 40 RFN 63 RFN 100 RFN 160 RFN 250 RFN 400 RFN 630 1. MAINTENANCE 1.1 GENERAL Please follow
More informationElectrohydraulic Drive System EHC-A
Electrohydraulic Drive System EHC-A HYDAC Denmark HYDAC Poland HYDAC Brazil HYDAC India HYDAC China HYDAC USA HYDAC France HYDAC Germany Your Professional Partner for Electrohydraulic Drive Systems. With
More informationSpare Parts List Return line filter RF
Spare Parts List Return line filter up to 15000 l/min, up to 25 bar 30 60 110 160 240 330 450 580 660 950 1300 2500 4000 5200 6500-7800 15000 1. MAINTENANCE 1.1 GENERAL Please follow the maintenance instructions!
More informationSpare Parts List Filter NFD Change-Over Version
Spare Parts List Filter Change-Over Version up to 1600 l/min, up to 5 bar 1340 640 540 7840 10440 1. MAINTENANCE GENERAL Please follow the maintenance instructions! 1. INSTALLATION Before fitting the filter
More informationSpare parts list Inline filter FLND switchable
Spare parts list Inline filter switchable to DIN 24550*, up to 400 l/min, up to 63 bar *Filters and fi lter elements also available in HYDAC dimensions 60 110 140 40 63 100 160 250 400 1. MAINTENANCE 1.1
More informationSpare Parts List Return Line Filter RFM with 4-hole attachment
Spare Parts List Return Line Filter with 4-hole attachment Tank-top mounted version: up to 850 l/min, up to 10 bar 75 90 150 165 185 195 210 270 330 500 600 661 851 1. MAINTENANCE GENERAL Please follow
More informationBe sure to order the correct number of elements: OLF 15 = 1, OLF 30 = 2, OLF 45 = 3, OLF 60 = 4
Replacement Elements OLF Offline Filters Model Code Micron Rating Media Type Part No. N15DM002 2 Dimicron 01251590 N15DM010 10 Dimicron 03115180 N15DM020 20 Dimicron 00349576 N15DM030 30 Dimicron 03048790
More informationAutomatic Back-Flushing Filter AutoFilt RF9.
Automatic Back-Flushing Filter AutoFilt RF9. AutoFilt RF9 Clearing the Way. The Challenge: In response to the Tier III standard which will come into effect in 2016, the International Maritime Organization
More informationHYDAC KineSys Motion Control Systems
HYDAC KineSys Motion Control Systems Thermal power plants Materials handling Iron and steel industry Renewable energies Presses Plastic injection machines Your Partner for Expertise in Motion Control Solutions.
More informationReturn Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 210 270 330 500 600 661 851 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
More informationLowViscosity Housing Filter LVH-F
LowViscosity Housing Filter LVH-F Description The LowViscosity-Housing Filter LVH-F is mainly used to filter low-viscosity fluids. It is especially suitable for applications with large amounts of dirt
More informationChange-Over Pressure Filter DFDK
Change-Over Pressure Filter up to 2500 l/min, up to 315 bar 30 60 110 140 160 240 280 330 500 660 1.x 660 2.x 990 2.x 1320 2.x 1320 3.x 2640 3.x 3960 3.x 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
More informationConditioning Module Reservoir Extraction CM-RE
Conditioning Module Reservoir Extraction CM-RE Description The ConditioningModule Reservoir Extraction CM-RE is designed as an accessory to the CS ContaminationSensors and the FCU FluidControl Units. The
More informationChange-Over Inline Filter RFLD Welded Version
Change-Over Inline Filter RFLD Welded Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
More informationHYDAC KineSys The energy-efficient drive system
HYDAC KineSys The energy-efficient drive system KineSys: The modern drive system from HYDAC Description: KineSys products and solutions are characterised by the perfect symbiosis of hydraulics and electromechanics.
More informationReturn Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 195 210 270 330 500 600 661 851 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
More informationAir Cooler Industry AC-LN 8-14 / ACA-LN 8-11 / ACAF-LN 8-11
Air Cooler Industry AC-LN 8-14 / ACA-LN 8-11 / ACAF-LN 8-11 Symbol General The AC-LN 8-14 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers
More informationReturn Line Filter RF
Return Line Filter up to 15000 l/min, up to 25 bar 30 60 110 160 240 330 450 580 660 950 1300 2500 4000 5200 6500-7800 15000 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings
More informationAutomatic back-flushing filter AutoFilt RF4
Automatic back-flushing filter AutoFilt RF4 RF4-1 RF4-2 Specifications Nominal size: G1 G 1½ Q max: 220 l/min p max: 16 bar Filtration ratings: 30 1000 µm 1. GENERAL Product description Self-cleaning automatic
More informationChange-Over Inline Filter AFLD to API 614
Change-Over Inline Filter to API 614 up to 17 l/min, up to 4 bar 112/ 113 122/ 123 232/ 233 242/243 332/333 52/53 542/543 882/883 142/143 272/273 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
More informationFeed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
More informationHydraulic primary unit Type ABPAG
RE 51 018/11.02 Replaces: 07.96 Hydraulic primary unit Type PG Reservoir volumes 63 to 400 litres Maximum operating pressure 360 bar H 2375 Type PG.. Overview of contents Contents Page Features 1, 2 Ordering
More informationSuction Filter SF/SFM/SFF and Suction Filter Elements S/S..
Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The
More informationOff-line filter / cooler unit FGSL
Fluidcontrol Off-line filter / cooler unit FGSL Coolers are used to stabilise the operating temperature in hydraulic and lubrication systems. This can be implemented particularly cost-efficiently by integrating
More informationBackflushing Filter AutoFilt RF4
1. Technical Specifications 1.1 General The automatic backflushing AutoFilt RF4 is a selfcleaning system for extracting particles from low viscosity fluids. Its robust construction and automatic backflushing
More informationFilter Elements. for use in HYDAC filters* Pressure filter. Pressure filter. filter element (DIN 24550) elements. long seam weld
1. TECHNiCAL SPECIFICATIONS 1.1 Construction As the core of the, it is the element which performs the actual filtration and/or dewatering function in the housing. They consist of several pleated filtration
More informationReturn line and Suction Boost Filter RKM
Return line and Suction Boost Filter up to 850 l/min, up to 10 bar 80 100 120 151 201 251 201/-TH 300 350 400 800 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
More informationFilters. RFD Series. Change-Over Return Line Filter Service and Parts. 2. Element Replacement. 2.1 Element Removal
1. Maintenance Filters Series Change-Over Return Line Filter Service and Parts up to 343 gpm (1300 l/min), up to 362 psi (420 bar) 1.1 General Please follow the maintenance instructions. 1.2 Installation
More informationReturn Line Filter HF4R up to 450 l/min, up to 10 bar
Return Line Filter HF4R up to 450 l/min, up to 10 bar 9" 18" 27" 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international regulations.
More informationAutomatic Back-Flushing Filter for Process Technology AutoFilt RF3.
Automatic Back-Flushing Filter for Process Technology AutoFilt RF3. AutoFilt RF3: So automatic, The Challenge Particle contamination in process water and other operating fluids accelerates the rate of
More informationHYDAC FILTER SYSTEMS GMBH
The information in this brochure relates to the operating conditions and applications described. For applications or operating conditions not described, please contact the relevant technical department.
More informationSpare Parts List Mobile Spin-On Filters MF/MFD. Flow rates up to 300 l/min Pressure range up to 8 bar Material: Aluminium / Sheet Steel
Spare Parts List Mobile Spin-On Filters MF/MFD Flow rates up to 300 l/min Pressure range up to 8 bar Material: Aluminium / Sheet Steel 1. MAINTENANCE INSTRUCTIONS 1.1. USER INSTRUCTIONS FOR FILTERS This
More informationEdition 04/2016. HYDAC Predictive maintenance
HYDAC Predictive maintenance Your partner for expertise in Predictive maintenance Predictive maintenance Operator model/worldwide field service Implementing a predictive maintenance strategy allows the
More informationInline filters NF NF 1350 NF 330 NF 750 NF 500 NF FILTER SPECIFICATIONS Nominal pressure
Inline filters up to 3500 l/min, up to 25 bar 160 240 280 330 500 750 950 1350 2650 on request 1310 2.x on request 2610 2.x 1340 2640 5240 7840 10440 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
More informationReplacement Elements
Pressure Elements Used in OFS Series, OFCS & OFCD Series, OFAS & OFAD Series, OF5HS & OF5HD Series, and OFX Skid - Standard Capacity Series 9 inch Elements 18 inch Elements 27 inch Elements Part No. Part
More informationPressure Filter DF...K P, DF...M P, Flange Mounted
Pressure Filter, DF...M P, Flange Mounted up to 550 l/min, up to 260 bar DF...M P 330...1.X 160 240 280 500...1.X 660...1.X 660...2.X 990...2.X 1320...2.X 660...3.X 990...3.X 1320...3.X 1. TECHNICAL SPECIFICATIONS
More informationHDE 4000-DM. Electrohydraulic high-pressure unit without pressure intensifier in modular design
HDE 4000-DM Electrohydraulic high-pressure unit without pressure intensifier in modular design HDE 4000-D /DM 4000 bar direct power in smallest space. Required type code Please only check one value per
More informationProcess Multi-Rheo Filter PMRF
Process Multi-Rheo Filter PMRF PMRF-1 PMRF-2 PMRF-3 PMRF-5 PMRF-6 PMRF-7 1. Technical Specifications 1.1 General The filter series PMRF (for duplex filters see PMRFD) Process Multi- Rheo Filter completes
More informationRFL Cast Series Service and Parts
Filters RFL Cast Series Service and Parts up to 343 gpm (1300 l/min), up to 580 psi (40 bar) 1. Maintenance 1.5 Torque Values 2. Element Replacement 1.1 General Please follow the maintenance instructions.
More informationPressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF
Pressure Filter for Manifold Mounting DFP and for Reversible Flow DFPF up to 600 l/min, up to 315 bar 60 110 140 160 240 280 330 500 660 1.X 660 2.X 990 1320 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING
More informationPressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX
Pressure Filter DF Pressure Filter for Reversible Oil Flow DFF/DFFX up to 2000 l/min, up to 420 bar DF/DFF...1.X/2.X 30 60 110 140 160 240 280 330 500 660 990 1320 1500 2000 3000 4000 DF...3.X DFFX...1.X/2.X
More informationRA / Internal Gear Pump Model GP2, Series 2X Fixed Displacement. Typical application:
Sizes 6.3 to 16 Internal Gear Pump Model GP2, Series 2X Fixed Displacement up to 576 PSI.397 to.98 in 3 (35 bar) (6.5 to 16 cm 3 ) RA 1 23/6.97 RA 1 23/6.97 Characteristics: Peak pressure of up to 576
More informationCourt of Registration: Saarbrücken, HRB Haering
LVU-CD-10 LowViscosity Unit CoaleserDiesel with control type: Eco Operating and Maintenance Instructions English (translation of original instructions) Document No.: 4067271 Keep for future reference.
More informationPlate Heat Exchangers
Plate Heat Exchangers General Plate heat exchangers are used wherever thermal energy (heat) has to be transferred from one fl uid to another. The advantage is that they can maintain the fl uid temperature
More informationFMM-P-L. FluidMonitoring Module. Installation and Maintenance Instructions. English (translation of original instructions) Document No.
FMM-P-L Installation and Maintenance Instructions English (translation of original instructions) Document No.: 3493215 Trademarks Trademarks The trademarks of other companies are exclusively used for the
More informationProcess screen basket filter PRFS
Process screen basket filter PRFS PRFS- PRFS- PRFS- PRFS- PRFS- PRFS- 130x 250x 520x 650x 1500x 2500x Nominal size: Q s max: p s max: Filtration ratings: Specifications DN 50 DN 700 3600 m³/h 16 bar 25
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationHDE 4000-D. Electrohydraulic high-pressure unit without pressure intensifier in mobile design. HDE 4000-D /DM 4000 bar direct power in smallest space.
HDE 4000-D Electrohydraulic high-pressure unit without pressure intensifier in mobile design HDE 4000-D /DM 4000 bar direct power in smallest space. Required type code Please only check one value per box.
More informationHydraulic Unit for Water Power Applications Standard HPU
Hydraulic Unit for Water Power Applications Standard HPU General Hydropower plants today make a vital contribution to the world s sustainable energy supply. HYDAC is determined to play its part in enabling
More informationReturn Line Filter RFM with 2-Hole Mounting
Return Line Filter RFM with 2-Hole Mounting Tank-top versions: up to 200 l/min, up to 10 bar RFM 75 RFM 90 RFM 150 RFM 165 RFM 185 In-tank versions: up to 2,600 l/min, up to 10 bar RFM S RFM KIT RFM SET
More informationLowViscosity Housing- Coalescer Diesel LVH-CD
LowViscosity Housing- Coalescer Diesel LVH-CD Description The LowViscosity Housing Coalescer LVH-C is mainly used for the dewatering of diesel. It is especially suitable for applications with large amounts
More informationRA / Internal Gear Pump Model GP3, Series 3X Fixed Displacement. Typical application:
Sizes 20 to 32 Internal Gear Pump Model GP3, Series 3X Fixed Displacement up to 5076 PSI 1.25 to 1.98 in 3 (350 bar) (20.6 to 32.5 cm 3 ) RA 10 234/07.97 Characteristics: Peak pressure of up to 5.076 PSI
More informationFILTER ELEMENTS. Overview of Elements PN# / / FIL
Overview of Elements C1 Overview of Elements Optimicron Elements ON - code designation Glass fiber, multi-layered with support Collapse rating - 29 psid (2 bar) 1, 3, 5, 1, 15, 2 micron Filtration Rating
More informationMultiRheo Filter MRF 1/2/3/4/5/6/7
MultiRheo Filter MRF 1/2/3/4/5/6/7 Description The MultiRheo filters of the MRF series are filter housings for use in open systems which are continually exposed to contamination. The candle filter elements
More informationFiltromat OF5LxxPxMxB
Filtromat Operating and Maintenance Instructions English (translation of original instructions) Document No.: 3594726a Trademarks Trademarks The trademarks of other companies designate the products of
More information4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
More informationHYDAC Quality for Pall Housings: Ecomicron 2-fit.
HYDAC Quality for Pall Housings: Ecomicron 2-fit. Your Reliable Partner for Complete Fluid Management. HYDAC Experts for complete solutions. Numerous customers and applications are the proof of HYDAC s
More informationInline Filters NF. Flow rates up to 3,500 l/min Pressure range 25 bar Material: Aluminium / Aluminium-Cast Iron
NF filters are designed for inline mounting and as tank-top mounted return line filters. These filters can also be used on filling, flushing and off-line units. Inline Filters NF Flow rates up to 3,500
More informationRKM Series Service and Parts
Filters RKM Series Service and Parts up to 211 gpm (800 l/min), up to 145 psi (10 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions on the last page. 1.2 Installation Before installing
More informationMultiRheo Filter MRF 1/2/3/4/5/6/7
MultiRheo Filter MRF 1/2/3/4/5/6/7 Description The MultiRheo filters of the MRF series are filter housings for use in open systems which are continually exposed to contamination. The candle filter elements
More informationSuction Filter SF/SFM/SFF and Suction Filter Elements S and S..
Suction Filter /M/F and Suction Filter Elements S and S.. up to 500 l/min Filters: 60 100 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
More informationInline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar
Inline Filter LPF D A Flange-Mounted up to 280 l/min, up to 25 bar 160 240 260 280 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed in accordance with international
More informationProcess Inline Filter PLF1
Process Inline Filter PLF1 10 bar 16 bar Specifications Nominal size: DN 50 DN 150 Q s max: 200 m 3 /h p s max: 16 bar Filtration ratings: 1 90 µm 1. GENERAL Product description Continuous separation of
More informationOil/Air Cooler Units. Standard series EL Type. Test procedure certified following EN 1048
COMPLETE OIL / AIR COOLER SYSTEM WITH AXIAL FAN FOR INDUSTRIAL APPLICATIONS. Application These high performance coolers with axial fans are suitable for hydraulic cooling applications with both return
More informationFilter cooler unit with inline filter according to DIN Type ABUKG. Contents. Features. RE Edition: Replaces: 50126
Filter cooler unit with inline filter according to DIN24550 Type ABUKG RE 50125 Edition: 2013-04 Replaces: 50126 Component series 4X With gerotor pump, external gear pump SILENCE PLUS or screw spindle
More informationE / Components, systems and service for telescopic loaders
Components, systems and service for telescopic loaders HYDAC is one of the world's leading suppliers for fluid technology, hydraulics and electronics, employing over 8,000 people. With our wide range of
More informationBackflushing Filter AutoFilt RF3
Backflushing Filter AutoFilt C 2,5 4 6 8 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL The automatic back-flushing filter AutoFilt is a self-cleaning system for extracting particles from lowviscosity fluids.
More informationProcess Inline Filter Medium / High Pressure PFM / PFH
Process Inline Filter Medium / High Pressure PFM / PFH PFx-0 PFx-1 PFx-2 PFx-3 Specifications Connection: G 1 Q S max: 8 m 3 /h p S max: 100 bar Filtration ratings: 1 2000 µm 1. GENERAL Product description
More informationVarnishElimination Unit- Filtration VEU-F-60/1-x-C
VarnishElimination Unit- Filtration VEU-F-60/1-x-C Operating and Maintenance Instructions English (translation of original instructions) Keep for future reference. Document No.: 4104528 Imprint Imprint
More informationHFM Series Service and Parts
Filters HFM Series Service and Parts up to 37 gpm (140 l/min), up to 5800 psi (400 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter
More informationPN# / / FSP Filter Systems Fluid Condition Monitoring & Control
Filter Systems Fluid Condition Monitoring & Control Components, Systems and Service. All from one Company. Our fluid engineering solutions are defined by the scope and complexity of our customers requirements.
More informationEN / Modern Duplex Filters for Large Engines
Modern Duplex Filters for Large Engines Modern Duplex Filters for Diesel, HFO and Lube Oil Filtration has a key role to play in developing and optimising heavy engine technology. The quality of the fuel
More informationGLOBAL STANDARD COOLER
GLOBAL STANDARD COOLER A A OIL-to-AIR COOLING SYSTEMS WITH AC-MOTOR Product Information AKG-Line is a standard line of products from the market leader in high performance aluminium cooling systems. AKG
More informationOFFLINE FILTRATION SYSTEMS
Offline Filtration Systems Today s hydraulic filter systems have seen a shift from reactionary to preventative, and even predictive maintenance. Total system contamination management begins with our Fluid
More informationOFFLINE SERIES GLOBAL STANDARD COOLER
OFFLINE SERIES GLOBAL STANDARD COOLER OIL-TO-AIR COOLING SYSTEMS WITH AC-MOTOR AND PUMP Product information AKG-Line is a standard line of products from the market leader in high performance aluminium
More informationDuplex Filter NFD (for NFD UHE (ultra-high efficiency), see NF Series) Service and Parts
Filters Duplex Filter NFD (for NFD UHE (ultra-high efficiency), see NF Series) Service and Parts up to 747 gpm (10400 l/min), up to 360 psi (5 bar) 1. Maintenance General Please follow the maintenance
More informationHYDAC (Three-Phase Current) Compact Power Units CO1
HYDAC (Three-Phase Current) Compact Power Units CO1 Up to 250 bar Up to 20 l/min In accordance with EN 60034-1 suitable for: Short-term operation: S2 = 5 min* (average value) Intermittent operation: S3
More informationLVU-CD-10 LowViscosity Unit CoaleserDiesel
LVU-CD-10 LowViscosity Unit CoaleserDiesel with control type: Standard or Premium Operating and Maintenance Instructions English (translation of original instructions) (Valid Series no. 0002S03302K0000010)
More informationTPV 4000 (EX 28-41) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE TRANSMISSION LINE OF HANSA-TMP HT 16 / M / 280 / 1008 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationDiesel PreCare HDP up to 1800 l/h
Diesel PreCare HDP up to 1800 l/h Manual Fully automatic 1. TECHNICAL SPECIFICATIONS 1.1 FILTER The Diesel PreCare is an innovative system for diesel prefiltration which protects vehicle manufacturers
More informationSectional Directional Control Valve RSQ 240
Sectional Directional Control Valve RSQ 0 Key valve features RSQ 0 is a sectional open center valve, designed for max. operating pressures up to 50 bar and max. pump flows up to 00 l/min. It is available
More informationFilters. HF2P 79.4 Series Service and Parts. Index P Clogging. Indicator Port G 1/
2.05 52 3.39 86 0.24 6 0.84 21.4 P Clogging Filters Indicator Port G 1/2 4.02 102 3.13 HF2P 79.4 Series Service and Parts INLET OUTLET This symbol is followed 3.86 by user tips and particularly useful
More informationIE3. Motor-pump groups. Type ABAPG and ABHPG. Features. Contents. RE Edition:
Motor-pump groups Type ABAPG and ABHPG RE 51180 Edition: 2015-02 With pump type: A10VSO Series 52: Size 10, Series 31: Sizes 18 to 140 Electric motor frame size 100L bis 315S Efficiency class IE3 H7890+7894_d
More information2.4 HEAVY DUTY SERIES
2 2.4 HEAVY DUTY SERIES CONTENTS PPV102 Ordering Code 2.4.1 Heavy Duty Series 2.4.2 Heavy Duty Series compensator 2.4.3 Standard gear pump models Technical Information 2.4.4 Specifications 2.4.5 Hydraulic
More informationProcess Inline Filter Protective filter PLF2-9HF
Process Inline Filter Protective filter PLF2-9HF Specifications Nominal size: DN 300 - DN 600 Q s max: 3000 m 3 /h p s max: 16 bar Filtration ratings: 1-90 µm 1. GENERAL Product description Protective
More informationRFN Series Service and Parts
Filters RFN Series Service and Parts up to 166 gpm (630 l/min), up to 145 psi (10 bar) 1. Maintenance 1.1 General Please follow the maintenance instructions. 1.2 Installation Before installing the filter
More informationMonoblock Directional Control Valve RM 230
Monoblock Directional Control Valve RM 230 Key valve features RM 230 light is a monoblock valve, designed for max. operating pressures up to 3,000 psi (210 bar) and typ. pump flows up to 20 gpm (70 Lpm).
More informationALLWEILER. Pressure relief valves, directly controlled. Series DS/DT
ALLWEILER Pressure relief valves, directly controlled Range of application The pressure relief valves of can be applied for maximum operating temperatures up to 150 C (higher temperatures on request).
More informationFilters. HF4R Series. Service and Parts. Index. Inlet. Outlet. ø7 (ø177.8mm) Bolt Circle ø6.25 (ø158.8mm) ø0.44 (ø11.1mm) 4 Places Equally spaced
ø7 (ø177.8mm) Clearance Required for Element Removal HF4R-9 10 (254mm) HF4R-18 19 (487mm) HF4R-27 28 (711mm) 2.38 (60.4mm) 4.26 (108.1mm) Filters G 1/2 Indicator Port HF4R Series 1/8 NPT Indicator Port
More informationProportional Pressure Reducing Valve PDM08130
Proportional Pressure Reducing Valve PDM08130 up to 80 bar up to 10 l/min Cartridge valves Control electronics Connection housings 486 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC proportional
More informationComponents and Systems for the Automotive Industry
Components and Systems for the Automotive Industry E 10.136.0/03.12 HYDAC Germany HYDAC USA HYDAC China HYDAC Korea The Professional Partner for the Automotive Industry With over 6,000 staff worldwide,
More informationOily Water Separators. globally focused on cleaner solutions
Oily Water Separators globally focused on cleaner solutions Oily Water Separators Victor Marine s bilge oily water separators are specifically engineered for the marine environment. Victor Marine have
More informationOff-line Oil Filter Module Pi 8400
Off-line Oil Filter Module Pi 8400 Volume flow l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
More informationFilters. HF3P Series Places 60 b c x d DP 4 Places Flange
1/2"-20UNF x 17 2.36 4 Places 60 b 6.42 163 5.23 133 4.53 115 c x d DP 4 Places a 6.30 Filters 160 6.42 163 Flange 2.05 0.24 52 6 P Clogging HF3P Series Indicator Port G 1/2" Service and Parts 6.30 160
More informationOPERATION AND SERVICE MANUAL. McGILL UNIVERSITY PROJECT: MCS-3237 SUBJECT: HYDRAULIC POWER UNIT AND ROTARY ACTUATORS DECEMBER 2001
OPERATION AND SERVICE MANUAL McGILL UNIVERSITY PROJECT: MCS-3237 SUBJECT: HYDRAULIC POWER UNIT AND ROTARY ACTUATORS DECEMBER 2001 CONTENTS 1. DESCRIPTION OF HYDRAULIC COMPONENTS... 3 1.1. HYDRAULIC POWER
More information