Lifting and transporting equipment.

Size: px

Start display at page:

Download "Lifting and transporting equipment."

Donna May
6 years ago
Views:

1 Lifting and transporting equipment

Liftra Self-Hoisting Crane lifting gearbox Blade Dragon installing blade vertically Main Shaft Fixture Siemens 2.

Liftra is specialized in developing and producing lifting- and transportation equipment for the wind turbine industry.

Liftra s vision is to continually set new standards for lifting and handling of the wind turbine parts, and by doing that, lower the cost of energy.

2 Liftra Self-Hoisting Crane lifting gearbox Blade Dragon installing blade vertically Main Shaft Fixture Siemens 2.3MW Introduction Liftra is a Danish engineering and production company founded in Liftra is specialized in developing and producing lifting- and transportation equipment for the wind turbine industry. With experience from more than 500 projects, Liftra embraces the full cycle of the wind turbine, and supplies to major players in the wind industry. Liftra s vision is to continually set new standards for lifting and handling of the wind turbine parts, and by doing that, lower the cost of energy. Projects Also Offshore References O&M / Energy Broadwind Centrica Dong Energy Duke Energy / Outland E.ON EDF / EnXco Kruger Energy Meridian Energy NextEra (FPL) Statoil Turbine Manufacturers Alstom Acciona Yinhe Avantis Doosan Gamesa IMPSA Mitsubishi Senvion (Repower) Samsung Siemens Wind Power Suzlon Vestas Suppliers / Other A2SEA ATS Wind Energy Services Bifab Bladt Industries Moventas MT Højgaard Smulders Technip Offshore Win & P Hochtief

LT998-1 Lifting yoke for Gearbox LT890-1 Rotor yoke NM64-NM72-NM82(V82) LT576

transportation, and maintenance products, including main shaft fixtures, rotor

All are developed and produced for a wide range of turbine parts and

In order to ensure our customers a short lead time, we have storage space in the

Each Liftra project is unique and developed for a specific customer or task.

3 LT998-1 Lifting yoke for Gearbox LT890-1 Rotor yoke NM64-NM72-NM82(V82) LT576 J-Hook 50 Ton Products & Projects Explore our best-selling lifting, transportation, and maintenance products, including main shaft fixtures, rotor yokes, and tower stacking frames. All are developed and produced for a wide range of turbine parts and manufacturers. In order to ensure our customers a short lead time, we have storage space in the US, Europe, and China containing our high demand products. Each Liftra project is unique and developed for a specific customer or task. Projects may be initiated based on an idea, or based upon necessity, whether during development or through delivery. Liftra also performs structural analysis, certification, and production of previously developed designs. LT532-3 Tower stacking frames WLL 80ton/ tower section LT019-1 Vestas & NEG Micon NM64C-72-82/1500 / NM72/1650 / V82 Liftra Self-Hoisting Crane installed on top of nacelle, ready for use

Liftra Self-Hoisting Crane Changing major components without a mobile crane The

can be moved back / removed without a mobile crane.

Crane, for installation and replacement of a gearbox or generator.

4 Liftra Self-Hoisting Crane Changing major components without a mobile crane The crane is designed for all turbines with gearboxes up to 24 ton and where the roof can be moved back / removed without a mobile crane. Only one 40 foot container is needed for transportation of the Liftra Self-Hoisting Crane, for installation and replacement of a gearbox or generator. Liftra Self-Hoisting Crane is lifted from container to nacelle using its own lifting wire Crane, just below Jib, ready for installation on base

Compatibility: We manufacture multiple crane bases that can be interchanged to replace gearboxes

Exchange of main shaft fixture Advantages of the Liftra Self-Hoisting Crane: Significantly reduces

5 Compatibility: We manufacture multiple crane bases that can be interchanged to replace gearboxes on the following turbines: Siemens 2,3MW NEG Micon/Vestas NM72, NM82, V82 Suzlon S88 Vestas V80 Nordex 2,5MW Platform GE 1.5MW Liftra Self-Hoisting Cranes can be designed for use on all turbines with a removable roof. Exchange of main shaft fixture Advantages of the Liftra Self-Hoisting Crane: Significantly reduces mobilization costs Operation in higher wind velocities (Up to 18m/s) Nacelle maintenance without the use of mobile crane Gearbox Installation Generator exchange Rotor Installation

Main Shaft Fixture Save time LT998-1 Rotor Yoke lifting a gearbox Eliminates the cost of lowering a rotor

gearbox off main-shaft A main shaft fixture can be assembled by the internal turbine hoist without the need

The main crane capacity is significantly lower since it eliminates the rotor which is commonly the heaviest

Liftra has a growing selection of more than 10 different main shaft fixtures.

For all the Liftra Main Shaft Fixtures: Main Shaft Fixtures RePower/Senvion MM82 & NM92 (2,0MW) Siemens 2.

5 MW Vestas and NEG Micon NM64c-72-82/1500 and NM72/1650 & V82 Vestas and NEG Micon NM48/750KW and

6 Main Shaft Fixture Save time LT998-1 Rotor Yoke lifting a gearbox Eliminates the cost of lowering a rotor Reduces risks Functions in higher wind speeds Fixture is assembled within nacelle Ejector system pushes gearbox off main-shaft A main shaft fixture can be assembled by the internal turbine hoist without the need for an external main crane, and without dismantling the rotor. The main crane capacity is significantly lower since it eliminates the rotor which is commonly the heaviest lift. All fixtures have an ejector system that pushes off the gearbox with up to 30 tons of force. Liftra has a growing selection of more than 10 different main shaft fixtures. For additional information please contact us. For all the Liftra Main Shaft Fixtures: Main Shaft Fixtures RePower/Senvion MM82 & NM92 (2,0MW) Siemens 2.3MW GE Energy 1.5 MW Vestas and NEG Micon NM64c-72-82/1500 and NM72/1650 & V82 Vestas and NEG Micon NM48/750KW and NM52/900KW Suzlon S88 (2,1MW) The fixture is delivered in a transport box and includes ejector system, fitting, and custom tools. This ensures that all parts needed for replacement of the gearbox is in a single unit - minimizing down time on site. The transport box is weather proof and can be locked. LT019-1 Vestas & NEG Micon NM64C-72-82/1500 & NM72/1650 & V82 LT928-1 Repower / Senvion MM82 & MM92 (2,0MW) LT860-1 Vestas & NEG Micon NM48/750KW & NM52/900KW LT019-1 Vestas & NEG Micon NM64C-72-82/1500 & NM72/1650 & V82 LT586-2 Siemens 2,3MW LT560-1 GE Energy 1,5 MW

Blade installation Lifting on one point No tailing crane needed

remotes Sensor to ensure correct clamping DNV certified Liftra Blade

Performs in wind up to 18 m/s and connects to the hub in all positions.

blades offshore, lifting blades horizontal to vertical LT631 & LT632 used

7 Blade installation Lifting on one point No tailing crane needed Electrically powered Remote controlled Double electrical system and remotes Sensor to ensure correct clamping DNV certified Liftra Blade Dragon lifting a 81,6mblade Blade Dragon sets a new standard for single blade installation. It is a remote controlled yoke for rotor assembly and disassembly. Performs in wind up to 18 m/s and connects to the hub in all positions. Offshore Haliade tm 150-6MW - Alstorm Blade Yoke used for installation of blades offshore, lifting blades horizontal to vertical LT631 & LT632 used for installation of a blade in +- 30deg LT575 Blade Dragon Installing 30 deg. horizontal LT870-1 Blade Yoke for lifting blade during assembly and disassembly of the rotor

Service Liftra provides a wide range of services including re-certification

equipment, and major component replacement with the Liftra Self Hoisting

Major Component Replacement One of the services that Liftra provides is the

and rotors utilizing the Liftra Self-Hoisting Spare parts for various Liftra

8 Service Liftra provides a wide range of services including re-certification of used Liftra equipment, operation and engineering support of customer equipment, and major component replacement with the Liftra Self Hoisting Crane. Major Component Replacement One of the services that Liftra provides is the replacement of major components, such as gearboxes, generators, main-shafts, and rotors utilizing the Liftra Self-Hoisting Crane. Spare parts for various Liftra Products and Projects Gearbox exchange using Liftra Self-Hoisting Crane Gearbox exchange Main Shaft Fixture installed and ready for installation of new gearbox

Tower Stacking Frames Each set consists of four support feet, two frames and

Using a fork lift, two feet are assembled on the top tower section, and

The bottom section is mounted with feet and frames then lifted to the stacking

Following this, the top section will be lifted and joined with the bottom

NEW! Our LT532-4 Stacking frame for stacking of tower sections from 4-5m and

Save $350,000-$650,000 per Shipment Available for rent Minimize space

6m (5m) Up to 100 ton / Tower Section Fast assembly In use since 2005 DNV

9 Tower Stacking Frames Each set consists of four support feet, two frames and ladders. Using a fork lift, two feet are assembled on the top tower section, and ladders are subsequently mounted. The bottom section is mounted with feet and frames then lifted to the stacking destination on the ship. Following this, the top section will be lifted and joined with the bottom section. This allows for safe and easy transportation of the tower section. NEW! Our LT532-4 Stacking frame for stacking of tower sections from 4-5m and up to 100ton. Save $350,000-$650,000 per Shipment Available for rent Minimize space requirements Tower flange diameter m (5m) Up to 100 ton / Tower Section Fast assembly In use since 2005 DNV approval LT532-3 Stacking set, assembled on the ship LT532-1 Stacking Set lashed to ship LT532-3 Stacking set with lashing LT532-3 stacking system packed in 40 container LT532-2 feets and ladders installed on tower, ready to lift to ship LT532-1 lifting a tower to ship, ready for stacking of top section LT532-3 towers are stacked, using Tower Stacking Frames, ready for transport

LT985-1 LT986-1 LT985/LT986 Lifting yokes for

Assembly supports Offshore Liftra has been part of

Today, Liftra is a major supplier of davit cranes,

and platforms for several offshore projects.

standards and can be approved by DNV, GL, and

We can modify most projects for offshore

10 LT985-1 LT986-1 LT985/LT986 Lifting yokes for Jacket LT987 Lifting yoke for 760ton Jacket Assembly supports Offshore Liftra has been part of the offshore turbine industry for over a decade. Today, Liftra is a major supplier of davit cranes, special lifting yokes for blades, nacelles, towers and platforms for several offshore projects. To read more details, see the offshore page on Liftra offshore projects comply with international standards and can be approved by DNV, GL, and others. We can modify most projects for offshore application. Please contact us for further information. Blade Dragon installing at 30 deg LT666 Lifting Yoke for tower and nacelle LT870-1 Blade Yoke lifting a 61.m blade

Davit Cranes Liftra has made 8 different types of davit cranes First davit developed in 2005 Offshore cranes from 200kg - 2ton Approved for person lift Offshore coating Reach from 0.

11 Davit Cranes Liftra has made 8 different types of davit cranes First davit developed in 2005 Offshore cranes from 200kg - 2ton Approved for person lift Offshore coating Reach from m Integrated permanent hoist LT850-1 Davit crane with integrated hoist Liftra has been producing Davit Cranes since 2005, and is a major supplier of davits in the offshore wind turbine industry. Mounted on the base of offshore wind turbines to lift tools and spare parts from supply boats. In addition, the davits can be certified for personal rescue. The product range spans davits WLL from 0.2T to 2T with reach from 0.8M to 5M. The bigger cranes can be delivered with integrated hoist as well as an optional slew drive. Supplier to: Vestas MT Højgaard Technip Statoil BiFab G&G Delivery batch of LT592-1 Davit cranes SWL 800kg, 2m reach

12 LIFTRA DENMARK (MAIN OFFICE) Liftra ApS. Phone: Liftra ApS. Stationsmestervej Aalborg SV Denmark-DK LIFTRA SPAIN Liftra SL. Phone: Liftra SL. Avenida San Bartolome Portal N 1, Piso 2 A Baracaldo (Vizcaya) C.P España LIFTRA GERMANY Liftra ApS. Phone: +49 (40) Mobile: germany@liftra.com LIFTRA CHINA Liftra Tianjin Co., Ltd. Phone: +86 (22) Phone: +86 (22) china@liftra.com Papenreye Hamburg Liftra Tianjin Co. Ltd. E4C-103, Binhai Finance Zone. 3rd Avenue, TEDA, Tianjin, China LIFTRA USA Phone: Mobile: liftra@liftra.com Liftra ApS. Liftra USA Inc Joslyn Dr Cincinnati, OH USA Rev05

Main Shaft Fixture & Rotor Lock. Reduces costs when changeing gearbox and fixing rotor for nacelle mainteneance

Lifting and transporting equipment Product magazine www.liftra.com Main Shaft Fixture & Rotor Lock Reduces costs when changeing gearbox and fixing rotor for nacelle mainteneance Pat.: PR 177 338 B1 Pat.