QUALITY FRICTION MATERIAL

Transcription

1 QUALITY FRICTION MATERIAL DON T COMPROMISE ON QUALITY! industries Wind Turbines High Speed Trains Gantry Cranes Military Tanks Industrial brake pads for use on 750KW-3MW capacity wind turbines. Our sintered brake pads are perfoming on TTX (Tilting Train Express), KTX II & G7 high speed trains. Gantry crane brake pads in sucessful operation worldwide. The German Leopard Tank & Korean K1 Military Tank use our sintered brake pads. customers Deutsche Wind Techink Goldwind Wind Farm India Renewable Energy NPower Custom Fluid Moventas Vestas RWE ZF Siemens Wind Power Worldwide OEM Windex Linavard SIA Lenkas Windtech Teico WRE Hellas Wind Solutions quality ISO 9001 and AS9100 The brake pads products are certified to meet with national and international standards for manufacturing and quality control. Thorough inspection and testing ensures our quality is never compromised.

2 M522, M510, MD 550 SINTERED METAL MATERIAL DYNAMIC TESTS Manufacuring Process M522 Pad Type. Dynamic stops 17/07/09 Speed rpm: 1000 to 0 Static Torque Nm: 00 Time Seconds: 9.5 Dynamic Coefficient of Friction: 0.38 Average Dynamic Torque Nm: 2570 Energy per Stop KJ: 1250 Clamping Force Newtons: Disc Diameter Metre: 0.75 M510 Pad Type. Dynamic stops 17/07/09 Speed rpm: 1000 to 0 Static Torque Nm: 00 Time Seconds: 8.1 Dynamic Coefficient of Friction: 0.41 Average Dynamic Torque Nm: 2570 Energy per Stop KJ: 1250 Clamping Force Newtons: Disc Diameter Metre: 0.75 MD550 Pad Type. Dynamic stops 21/11/08 Speed rpm: 1000 to 0 Static Torque Nm: 00 Time Seconds: Dynamic Coefficient of Friction: 0.40 Average Dynamic Torque Nm: 2740 Energy per Stop KJ: 1250 Clamping Force Newtons: Disc Diameter Metre: 0.75 The information supplied is believed to be accurate and reliable, and was obtained by scientific and laboratory testing. However, since actual conditions of use are largely outside the control of Industrial Clutch Parts Ltd, it is suggested that this material be thoroughly tested and its suitability for use be determined before final acceptance.

3 All friction materials are OEM or After Market Approved. Our technical sales personnel have a combined experience of over 150 years in the friction industry. On site engineers can inspect and advise on the condition, maintenance & application of any hydraulic, pneumatic or electromagnetic brake unit. friction brake pads Our Caliper Brakes and replacement Friction Pads are suitable for most of the following Wind Turbine manufacturers: Vestas - Denmark GE Energy - USA Sinovel - China Enercon - Germany Goldwind - China Gamesa - Spain Dongfang - China Suzlon - India Siemans Wind Power - India REpower - Germany Alstom Ecotècnia - Spain DeWind - Germany Doosan - Korea NEG Micon- now part of Vestas Nordex - Germany Norwin A/S - Denmark Vensys - Denmark/Germany Windiva Energy - India 300 Series Svendborg Ref: & CSB300/M522 BSFM 300/BSFH 300 /BSFI 300/BSAK L x 125W x 24TH mm Svendborg Ref: Series Svendborg Ref: CSB3000/M510 BSFM 3000 / BSFI 3000 / BSAK L x 200W x 32TH mm 200 Series Svendborg Ref: Series Svendborg Ref: L x 200W x 32TH mm 300 Series Svendborg Ref: PA75/90/142 BSAB 75/90 218L x 108W x 18TH mm CSB200/TRW BSFI L x 70W x 15TH mm CSB300/TRW BSFI L x 125W x 24TH mm

4 friction brake pads ICP Svendborg Ref: Svendborg Ref: Series Svendborg Ref: Svendborg Ref: /90 238L x 116W x 18TH mm BSAB L x 108W x 18TH mm BSFG L x 125W x 19TH mm BSAB75 236L x 110W x 13TH mm Svendborg Ref: L x 67W x 12TH mm ICP Svendborg Ref: Svendborg Ref: Series Svendborg Ref: Series Svendborg Ref: Series Svendborg Brake Pad 75/90 217L x108w x 18TH mm ICP Svendborg Ref: CSB500/TRW BSFH L x 220W x 25TH mm BSAB75-S-30X 236L x 110W x 18TH mm BSFI300 BSFI L x 125W x 24TH mm PA120/142 BSAB L x 138W x 21TH mm CSB200/M522 CSB L x 70W x 15TH mm ICP 200 Series Svendborg Ref: Vestas Ref: ICP Sime Ref: ICP Sime Ref: CSB200/TRW BSFI L x 70W x 15TH mm / L x 117W x 16TH mm FCHR90 / 142 FCHR90A GF B828 ZS L x 290W x 18TH mm Various Sime 360L x 182W x 10TH mm

5 friction brake pads ICP Sime Ref: ICP Sime Ref: Series Sime Brake Pad 510 Series Sime Brake Pad ICP Twiflex MR/MS Ref: Z SYFT-01A TH9 2C 3C 1T 2T 3T 314L x 109W x 10TH mm SYFT-01A TH9 2C 3C 1T 2T 3T 314L x 109W x 14TH mm FTL510 TH9 2C 3C 1T 2T 3T 314L x 109W x 14TH mm FTL510 Various Sime 220L x 148W x 15TH mm MR/138 & MR/ L x 47.5W x 11.7THmm ICP Twiflex MU Ref: Z ICP Twiflex MX Ref: Z ICP Twiflex GMR Ref: Z ICP Twiflex Ref: Z ICP Twiflex T40 Ref: Z MU/176 (STD) & MU/177 (LOCO) 50L x 30W x 21TH mm MX/176 Std Co MX/177 Low Co 90L x 60W x 12.7TH mm GMR/ L x 110W x 19TH mm CE150 (STD) 53L x 47W x 17.5TH mm T40/176 85L x 80W x 21TH mm ICP Twiflex VKSD Ref: Z ICP Twiflex VC Ref: Z ICP Antec Ref: ICP Antec Ref: ICP Dellner Ref: SKD50 OEM Part: Material: OEM Part: Material: 215L x 181W x 22TH mm 91L x 80W x 30THmm FTL L x 129W x 23TH mm FTL L x 132W x 25TH mm SKD50 128L x 69W x 19TH mm

6 brembo Caliper Disc Brake Vestas Ref: / L x 92W x 16TH mm Vestas Ref: Supplied with Thermistor S Material: MPM 030 Sintered Iron / L x 92W x 16TH mm Pistons Moulded Organic Brake Pad Caliper Brake Rubber Rings Caliper Brake Rubber Seal & Screw Caliper Pin Set / L x 83W x 17TH mm

7 The range of ICP industrial high integrity brakes offers a system meeting the highest requirements for safety and reliability for small and large braking applications and multifunction service and emergency braking. rotor braking Monospring (single caliper) options available Spring Applied Advantages Complete & comprehensive quality control to ensure no oil leaks. High quality sintered metalic linings. Superior corrosion protection. Marine protection as standard. CSB-200 Disc Brake Spring Engaged Force up to 12KN CSB-300 Disc Brake Spring Applied Force up to 65KN CSB-3000 Disc Brake Spring Applied Force up to 130KN CSB-5000 Disc Brake Spring Applied Force up to 270KN Compact mounting. Conventional dual cylinder design. Mono cylinder design option. Small air gap. Short response time - fast breaking. Large brake pad areas. Easy maintenance - few moving parts. Mono Spring Brake - easy mounting (only 2 mounting bolts) Pad retraction springs. Drain ports for hydraulic leakage.

8 All hydraulic power units are tested to field conditions. All units come completely with internationally certified brand name components. All valves, pressure switches, motors & pumps etc to ensure a long life and trouble free system operation. hydraulic power unit Bleed and pressure test ports. Accumulator supplied with failsafe monitoring sensor (accumulator fault signal in event of defect). Status monitoring of brakes applied (released) takes place by means of a pressure switch. HPT-WT-06 HPT-WT-10 HPT-WT-15 All electric motors IEC design. Note: Special design requirements & specifications are required for offshore hydraulic power units.

9 The range of ICP industrial high integrity brakes offers a system meeting the highest requirements for safety and reliability for small and large braking applications and multifunction service and emergency braking. yaw braking Hydraulic Applied Advantages Complete & comprehensive quality control to ensure no oil leaks. Silent braking operation. Superior corrosion protection. Easy maintenance & lining replacement. Light weight caliper component design for ease of handling. Standard bleed and oil leakage connections. Compact design. Small air gap. Large brake pad area. Short response time - fast breaking. Easy maintenance - few moving parts. PA-090 Disc Brake Hydraulic Applied Force up to 200bar PA-120 Disc Brake Hydraulic Applied Force up to 150bar

10 siemens yaw brake caliper brakes Dellner SKD50 Hydraulic pressure applied, spring released disc brake 100bar release Coremo ID 800 Hydraulic Applied Brake 100bar Coremo ID 900N Spring Applied Brake 100bar release Cotton Lining The Siemens Yaw Brake Shoe with double set of fixing holes fits the 400, 450, 500 and 600 Siemens Wind Turbine. To ensure ease of fitting, professional drilling jigs have been created from the Siemens Shoe. Coremo ID 2000N Spring Applied Brake 100bar release Coremo ID 3000N Spring Applied Brake, Hydraulic Release 100bar release

11 small wind turbines Coremo D-N Electric Caliper Brake 5.7kn, vac operation ICP ABF kn,207vdc operation