Main Shaft Fixture & Rotor Lock. Reduces costs when changeing gearbox and fixing rotor for nacelle mainteneance
|
|
- Brianne Hill
- 5 years ago
- Views:
Transcription
1 Lifting and transporting equipment Product magazine Main Shaft Fixture & Rotor Lock Reduces costs when changeing gearbox and fixing rotor for nacelle mainteneance Pat.: PR B1 Pat. Pend.: WO2012/ A1 PA
2 Main Shaft Fixtures & Rotor Locks Liftra has designed and produced many different main shaft fixtures and has more than 9 years of experience with this specific task. Liftra has performed wind/load calculations for all rotor sizes and types. Product p. 4 Product p. 10 LT586 Siemens 2,3 MW LT860 NM750, NM900 Product p. 6 Product p. 12 LT560 GE 1,5 MW LT928/1 NM82 & NM92 Product p. 8 Product p. 14 LT019 NM72, NM64, NM82, NM1500, NM1650 LT720-1 Suzlon S88 Use a Fixture: When Changing gear box. There is no space for rotor to be grounded (mountains, forrests, land owners etc.) Gearbox is jammed. Why Save time. Save grounding costs. Minimize risks. Work in higher wind velocities. How Fixture is assembled within nacelle. Ejector system pushes off the gear box. Change of gear box. Fixture is removed from nacelle.
3 REDUCE MOBILIZATION COSTS A main shaft fixture can be assembled with the turbine crane. No need for early mobilization of external crane. No rotor dismantling required. Saving early mobilization of main crane. Main crane capacity is much lower since it must lift only the fixture and the gear box. Ejector System All fixtures have an ejector system, that pushes off the gear box with a force of up to 30 ton. Custom fixtures can be designed on request LIFTRA engineering team is specialized in lifting, transportation and handling of heavy components within the wind turbine industry. We are familiar with both components and their route through production to on-site installation and maintenance. Liftra is recognized by the international wind turbine industry as a specialist in lifting and transportation equipment. We guarantee excellent engineering and equipment production in our field.
4 Lifting and transporting equipment Product magazine LT586 Main Shaft Fixture 2,3 MW Siemens
5 Proven Technology Back to Table of Content Liftra has designed and produced more than 5 different main shaft fixtures and has more than 9 years of experience, and performed wind/load calculations for all rotor sizes and types. Liftra produces Main shaft fixture for all Siemens 2,3MW turbines, to fix the main shaft when the gearbox is changed. With the main shaft fixture the rotor does not have to be placed on ground, the gearbox can be changed in higher wind and the risk is reduced doing the operation. The ejector system ensures easy dismantle of the gearbox from the main shaft with a pushing force of up to 30 ton. Complete with Accesories The fixture is delivered in a transport box including ejector system, fittings and custom tools. This ensure that all parts needed for change of gearbox is in a single unit - minimizing waiting time on site. The transport box is weather proof and can be locked.
6 Lifting and transporting equipment Product magazine LT560 Main Shaft Fixture GE Energy 1,5MW
7 Proven Technology Back to Table of Content Liftra has designed and produced more than 5 different main shaft fixtures and has more than 9 years of experience, and performed wind/load calculations for all rotor sizes and types. Liftra produces Main shaft fixture for all Siemens 2,3MW turbines, to fix the main shaft when the gearbox is changed. With the main shaft fixture the rotor does not have to be placed on ground, the gearbox can be changed in higher wind and the risk is reduced doing the operation. The ejector system ensures easy dismantle of the gearbox from the main shaft with a pushing force of up to 30 ton. Complete with Accesories The fixture is delivered in a transport box including ejector system, fittings and custom tools. This ensure that all parts needed for change of gearbox is in a single unit - minimizing waiting time on site. The transport box is weather proof and can be locked.
8 Lifting and transporting equipment Product magazine LT019 Main Shaft Fixture Vestas & NEG Micon NM64C-72-82/1500 NM72/1650 & V82
9 Proven Technology Back to Table of Content Liftra has designed and produced more than 5 different main shaft fixtures and has more than 9 years of experience, and performed wind/load calculations for all rotor sizes and types. Liftra produces Main shaft fixture for all Siemens 2,3MW turbines, to fix the main shaft when the gearbox is changed. With the main shaft fixture the rotor does not have to be placed on ground, the gearbox can be changed in higher wind and the risk is reduced doing the operation. The ejector system ensures easy dismantle of the gearbox from the main shaft with a pushing force of up to 30 ton. Complete with Accesories The fixture is delivered in a transport box including ejector system, fittings and custom tools. This ensure that all parts needed for change of gearbox is in a single unit - minimizing waiting time on site. The transport box is weather proof and can be locked.
10 Lifting and transporting equipment Product magazine LT860-1 Main Shaft Fixture Vestas & NEG Micon NM48/750KW & NM52/900KW
11 Proven Technology Back to Table of Content Liftra has designed and produced more than 5 different main shaft fixtures and has more than 9 years of experience, and performed wind/load calculations for all rotor sizes and types. Liftra produces Main shaft fixture for all Siemens 2,3MW turbines, to fix the main shaft when the gearbox is changed. With the main shaft fixture the rotor does not have to be placed on ground, the gearbox can be changed in higher wind and the risk is reduced doing the operation. The ejector system ensures easy dismantle of the gearbox from the main shaft with a pushing force of up to 30 ton. Complete with Accesories The fixture is delivered in a transport box including ejector system, fittings and custom tools. This ensure that all parts needed for change of gearbox is in a single unit - minimizing waiting time on site. The transport box is weather proof and can be locked.
12 Lifting and transporting equipment Product magazine LT928-1 Main Shaft Fixture RePower&Senvion NM82 & NM92 (2,0MW)
13 Proven Technology Back to Table of Content Liftra has designed and produced more than 5 different main shaft fixtures and has more than 9 years of experience, and performed wind/load calculations for all rotor sizes and types. Liftra produces Main shaft fixture for all Siemens 2,3MW turbines, to fix the main shaft when the gearbox is changed. With the main shaft fixture the rotor does not have to be placed on ground, the gearbox can be changed in higher wind and the risk is reduced doing the operation. The ejector system ensures easy dismantle of the gearbox from the main shaft with a pushing force of up to 30 ton. Complete with Accesories The fixture is delivered in a transport box including ejector system, fittings and custom tools. This ensure that all parts needed for change of gearbox is in a single unit - minimizing waiting time on site. The transport box is weather proof and can be locked.
14 Lifting and transporting equipment Product magazine LT720-1 Main Shaft Fixture SuzlonS88 (2,1MW)
15 Proven Technology Back to Table of Content Liftra has designed and produced more than 5 different main shaft fixtures and has more than 9 years of experience, and performed wind/load calculations for all rotor sizes and types. Liftra produces Main shaft fixture for all Siemens 2,3MW turbines, to fix the main shaft when the gearbox is changed. With the main shaft fixture the rotor does not have to be placed on ground, the gearbox can be changed in higher wind and the risk is reduced doing the operation. The ejector system ensures easy dismantle of the gearbox from the main shaft with a pushing force of up to 30 ton. Complete with Accesories The fixture is delivered in a transport box including ejector system, fittings and custom tools. This ensure that all parts needed for change of gearbox is in a single unit - minimizing waiting time on site. The transport box is weather proof and can be locked.
16 LIFTRA DENMARK (MAIN OFFICE) Liftra ApS. Phone: Liftra ApS. Stationsmestervej Aalborg SV Denmark-DK LIFTRA SPAIN Liftra SL. Phone: Liftra SL. Avenida San Bartolome Portal N 1, Piso 2 A Baracaldo (Vizcaya) C.P España LIFTRA GERMANY Liftra ApS. Phone: +49 (40) Mobile: germany@liftra.com LIFTRA CHINA Liftra Tianjin Co., Ltd. Phone: +86 (22) Phone: +86 (22) china@liftra.com Liftra Tianjin Co. Ltd. E4C-103, Binhai Finance Zone. 3rd Avenue, TEDA, Tianjin, China LIFTRA USA Phone: Mobile: liftra@liftra.com Liftra ApS. Liftra USA Inc Joslyn Dr Cincinnati, OH USA
Lifting and transporting equipment.
Lifting and transporting equipment www.liftra.com Liftra Self-Hoisting Crane lifting gearbox Blade Dragon installing blade vertically Main Shaft Fixture Siemens 2.3MW Introduction Liftra is a Danish engineering
More informationLIFTRA COMPANY OVERVIEW LIFTRA SELF-HOISTING CRANE OVER 300 GEARBOX REPLACEMENTS WORLDWIDE
LIFTRA SELF-HOISTING CRANE OVER 300 GEARBOX REPLACEMENTS WORLDWIDE LIFTRA COMPANY OVERVIEW LIFTRA SPECIALIZES IN TAILOR-MADE SOLUTIONS FOR SPECIAL LIFTING AND TRANSPORTATION TASKS IN THE GLOBAL WIND TURBINE
More informationGEARBOX REPLACEMENT OUTLINE OF TASKS, RESPONSIBILITIES
GEARBOX REPLACEMENT OUTLINE OF TASKS, RESPONSIBILITIES 01 Contracting Liftra to replace gearboxes with the LT1000-2 Self-Hoisting Crane. LIFTRA SELF-HOISTING CRANE ADVANTAGES REDUCED MOBILIZATION SAVE
More informationEmbracing the full life cycle of the wind turbine
To set new standards for lifting and transportation equipment in the wind turbine industry. 45 engineers in 6 countries and more than 500 projects from small lifting brackets to blade Dragon and Self Hoisting
More informationLow Speed Wind Turbines. Current Applications and Technology Development
Low Speed Wind Turbines Current Applications and Technology Development Why low wind speed turbines? Easily accessible prime class 6 sites are disappearing. Many class 6 sites are located in remote areas
More informationQUALITY FRICTION MATERIAL
QUALITY FRICTION MATERIAL DON T COMPROMISE ON QUALITY! industries Wind Turbines High Speed Trains Gantry Cranes Military Tanks Industrial brake pads for use on 750KW-3MW capacity wind turbines. Our sintered
More informationplants worldwide and, at the same time, meet local content requirements
Wind energy Market leader Vestas maintains an in-house rotor blade production in Lem, Denmark. Photo: Vestas German Bard Engineering GmbH started its rotor blade production in Emden last year. Photo: Bard
More information3 rd German-American Wind Energy Conference. Welcome to Houston
3 rd German-American Wind Energy Conference Welcome to Houston Petra Hemming & Jeff Freeman 01 Experience, Competence and Know-How 02 Company 1. Introduction 2. Plarad s Competence 3. Windpower Industry
More informationENERCON 3 MW and 7,5 MW Portfolio E-82 E3, E-101 and E-126
ENERCON 3 MW and 7,5 MW Portfolio E-82 E3, E-101 and E-126 Juan Ruiz-Jarabo Director General ENERCON GmbH Sucursal en España ENERCON WEC Continuous Technological Development The Wind Energy Market ENERCON
More informationModule 3: Types of Wind Energy Systems
Module 3: Types of Wind Energy Systems Mohamed A. El-Sharkawi Department of Electrical Engineering University of Washington Seattle, WA 98195 http://smartenergylab.com Email: elsharkawi@ee.washington.edu
More informationGRAND RENEWABLE ENERGY PARK PROJECT DESCRIPTION REPORT. Attachment C. Turbine Specifications
GRAND RENEWABLE ENERGY PARK PROJECT DESCRIPTION REPORT Attachment C Turbine Specifications Published by and copyright 2009: Siemens AG Energy Sector Freyeslebenstrasse
More informationWind Generation and its Grid Conection
Wind Generation and its Grid Conection J.B. Ekanayake PhD, FIET, SMIEEE Department of Electrical and Electronic Eng., University of Peradeniya Content Wind turbine basics Wind generators Why variable speed?
More informationBright outlook for improved profitability. Direct drive wind turbine SWT Answers for energy.
Bright outlook for improved profitability Direct drive wind turbine SWT-3.0-101 Answers for energy. How can you gain maximum performance with 50 percent fewer parts? 2 As wind power plants develop capacities
More informationGerman-American Chamber of Commerce Offshore wind conference Jersey City, NJ October 18, 2011
German-American Chamber of Commerce Offshore wind conference Jersey City, NJ October 18, 2011 Robert (Bob) Schubert Key Account Executive Siemens Energy Inc. Radnor, PA Sent as pdf to GACC 2010 2011 Siemens
More informationV MW The future for low wind sites
V0-2.75 MW The future for low wind sites Knowing which way the wind blows The V0-2.75 MW turbine know which way the wind blows, and is designed to follow it. A significant advance in wind turbine efficiency,
More informationUK Wind Turbine Market Opportunities For UK Companies Promoting the UK component supply chain
Introducing UK Wind Turbine Market Opportunities For UK Companies Who is going to make them? Who is going to make them? Who is going to make them? Developing the opportunities for UK companies in the wind
More informationYour Turbine in Safe Hands
Your Turbine in Safe Hands From massive scale to critical detail 1. Hub/Pitch Panel 2. Pitch Accumulators 3. Pitch/Blade Lock 4. Pitch Actuator 5. Rotor Lock System 6. Lubrication System 7. Through Gearbox
More informationsetting the standard Electromagnetic braking systems for wind turbines
setting the standard Electromagnetic braking systems for wind turbines www.intorq.de We set the standards The INTORQ brand stands for reliable brake solutions of the highest standard. Whether in cranes,
More informationPRELIMINARY METHOD OF STATEMENT
PRELIMINARY METHOD OF STATEMENT LID Energy 30 MW Wind Turbine Erection Project Belen / TURKEY Table of Contents 1. Cranes...... page 3 2. Tackle Check List....... page 3 3. Turbine Details.... page 3 4.
More informationRenewable Energy: Where Are We and Where Are We Headed?
Renewable Energy: Where Are We and Where Are We Headed? Presented by: Alan Merkle June 27, 2013 Tulalip, WA 1 Stoel Rives is pleased to announce that is has received National rankings for its Renewables
More informationEMB Systems AG. Products. Safety for a world in motion. Rotor Brakes Yaw Brakes Rotor Locks NEG MICON Yaw Brake Refitting Kit
EMB Systems AG Safety for a world in motion Products Rotor Brakes Yaw Brakes Rotor Locks NEG MICON Yaw Brake Refitting Kit EMB-Brakes are approved and recommended by leading engineering companies as replacement
More informationV MW Creating more from less
V82-1.65 MW Creating more from less Grid compliance As wind turbines capture more of the electricity market each year, they have an increasingly significant role to play in grid management. Fortunately,
More informationaeromaster wind turbines Reliable, compact, flexible and economical
aeromaster wind turbines Reliable, compact, flexible and economical experience. innovation. success. aeromaster for onshore applications Our reliable and flexible onshore turbine platform can be adapted
More informationSHC. Chemical Corporations 5 Star Lubrication Service Package for Wind Turbines
Chemical Corporations 5 Star Lubrication Service Package for Wind Turbines Over the past few years Chemical Corporation, Mobil Industrial Lubricants and Sage Oil Vac (USA) have worked closely together
More informationV MW & 2.0 MW Built on experience
V90-1.8 MW & 2.0 MW Built on experience Innovations in blade technology Optimal efficiency The OptiSpeed * generators in the V90-1.8 MW and the V90-2.0 MW have been adapted from those in Vestas highly
More informationThe wind is outside. Fluitecnik is inside. Hydraulic and Cooling Systems
The wind is outside. Fluitecnik is inside. Hydraulic and Cooling Systems FLUITECNIK was created in 1991, and has a large international presence in the field of renewable energies. Currently, we have over
More informationYour Turbine in Safe Hands
Your Turbine in Safe Hands From massive scale to critical detail 1. Hub/Pitch Panel 2. Pitch Accumulators 3. Pitch/Blade Lock 4. Pitch Actuator 5. Rotor Lock System 6. Lubrication System 7. Through Gearbox
More informationGOLDWIND S48/ kW Industrial Wind Turbine (50Hz) World Wide Shipping. Immediate Availability. Installation Services.
750kW Industrial Wind Turbine (50Hz) Includes: Tower, Nacelle, Hub, Rotor, Blades and Controller Complete systems starting from only $410,000.00 - FOB Technical Specifications: Rated Power:750kW Rotor
More informationSEI Overview - Wind Power
SEI Overview - Wind Power Carbondale/Paonia Colorado www.solarenergy.org WHY WIND (renewables)? Gain energy independence from fossil fuels Ease demand on the power grid Reduce vulnerability to volatile
More informationMainshaft Bearings: Bearing Arrangements, Damage Modes and Technology Advancements. Presented by Richard Brooks AWEA O&M Conference 2017
Mainshaft Bearings: Bearing Arrangements, Damage Modes and Technology Advancements Presented by Richard Brooks AWEA O&M Conference 2017 1 BEARING TYPE COMPARISON Spherical Roller Bearing Radial Internal
More informationGreen energy conversion
Green energy conversion Prof. Dr.-Ing. habil. Andreas Binder Department of Electrical Energy Conversion Darmstadt University of Technology abinder@ew.tu-darmstadt.de Prof. A. Binder 1.1/1 Contents of lecture
More informationImproving The Life Of Gearboxes & Lowering Repair Costs
Improving The Life Of Gearboxes & Lowering Repair Costs State of the Art Manufacturing Facilities & Heat Treatment Pioneer 35 years experience Certified supplier network Moventas material specifications
More informationBENEFITS. Maximum output at minimum cost per kwh for low wind sites. - Class IIIA/WZII.
GAMESA G90-2.0 MW BENEFITS Maximum output at minimum cost per kwh for low wind sites - Class IIIA/WZII. - Pitch and variable speed technology to maximize energy production. - Production of lighter blades
More informationG87-ingles 14/12/06 17:44 Página 2 GAMESA G MW
G87-ingles 14/12/06 17:44 Página 2 GAMESA G87-2.0 MW G87-ingles 06/12/14 15:47 Página 3 BENEFITS Maximum output at minimum cost per kwh for medium wind sites - Class IIA/WZII. - Pitch and variable speed
More informationHedeager Aarhus N Denmark. Vestas V MW / V MW
Certificate No. This certificate is issued to for the wind turbine wind turbine class (class, standard, year) Vestas Wind Systems A/S Hedeager 42 8200 Aarhus N Denmark Vestas V136-3.45 MW / V136-3.60 MW
More informationAPPENDIX J V90 3.0MW Turbine Specifications
APPENDIX J V90 3.0MW Turbine Specifications V90-3.0 MW An efficient way to more power Innovations in blade technology 3 44 meters of leading edge In our quest to boost the efficiency of the V90, we made
More informationModel: H kW. Features: 1. SCF Supercritical generator. 2. NSK bearings. 3. PLC integrated with Siemens module. 4. Low noise
Model: H16.5-50kW Hummer 50kW wind turbine can be applied in both on-grid and off-grid systems. The output is three-phase AC and it can drive loads below 50kW. Features: 1. SCF Supercritical generator
More informationPERMANENT MAGNET MATERIAL PROPERTY CRITERIA IN WIND POWER APPLICATION
PERMANENT MAGNET MATERIAL PROPERTY CRITERIA IN WIND POWER APPLICATION 14th of June 2012 1 I The Switch 2011 CONTENTS The Switch Turbine technology Generator types PMG rotor designs for WP Demagnetization
More informationSERVICE MAINTENANCE AND OVERHAUL HYDRO AFTER SALES SERVICE
SERVICE AND HYDRO AFTER SALES SERVICE SERVICE AND Even the highest quality equipment cannot offer 100% protection against wear-related failures. Maintenance and repair through our worldwide on-site service
More informationNew dimensions. Siemens Wind Turbine SWT Answers for energy.
New dimensions Siemens Wind Turbine SWT-3.6-107 Answers for energy. 2 New dimensions The SWT-3.6-107 wind turbine is the largest model in the Siemens Wind Po wer product portfolio. It was specifically
More informationV MW An efficient way to more power
V90-3.0 MW An efficient way to more power Innovations in blade technology 3 44 metres of leading edge In our quest to boost the efficiency of the V90, we made sweeping improvements to two aspects of our
More informationsetting the standard Electromagnetic braking systems for industrial trucks
setting the standard Electromagnetic braking systems for industrial trucks www.intorq.de We set the standards The INTORQ brand stands for reliable brake solutions of the highest standard. Whether in cranes,
More informationPitch Systems. Siemens AG All Rights Reserved.
Pitch Systems Motion Control Equipment for Wind SINAMICS Pitch & Yaw Solutions SINAMICS Pitch Solutions Application Positioning of rotor blades at perfect angle Dynamic operation depending on Wind speed
More informationWind Turbine Gearbox Services. ZF Services North America, LLC
Wind Turbine Gearbox Services ZF Services North America, LLC Contents The Company Introduction ZF and Global Wind Turbine Gearbox Service Worldwide Service Locations ZF Services North America, LLC Services
More informationThe SGT5-8000H proven in commercial operation
www.siemens.com/energy The SGT5-8000H proven in commercial operation Answers for energy. 2 375 MW Output of the Siemens Gas Turbine SGT5-8000H.* * Gross: ISO ambient conditions 375 MW Rated output of 375
More informationWind Power Solutions
Wind Power Solutions Because ensuring a leak-free solution is critical. It has to be Hydratight. For more than 100 years, Hydratight has provided world-class bolted joint solutions, assessing and managing
More informationTower internals for Wind Turbines
Tower internals for Wind Turbines One stop supply chain September 2018 Group What we can do for you... Resolux can share with you 16 years of experience in the wind industry and supply you locally with
More informationGE Renewable Energy. Unsubsidised Onshore Wind. Charles Haworth PhD Risk and Operations Leader EMEA & Asia. Imagination at at work.
GE Renewable Energy Unsubsidised Onshore Wind Charles Haworth PhD Risk and Operations Leader EMEA & Asia Imagination at at work. 2015 General Electric Company GE 1.6-100 wind turbines 170MW, Rio Grande
More informationAccessories for. Vertimill. The most mature stirred milling technology
Accessories for Vertimill The most mature stirred milling technology Vertimill screw liners Metso Vertimills are available in many different sizes and for different applications. Metso offers a complete
More informationReliability is our profession
Reliability is our profession Drive components for wind turbines Siemens AG Am Industriepark 2 46562 Voerde Germany Phone +49 2871 92-4 Fax +49 2871 92-2487 E-Mail info@winergy-group.com www.winergy-group.com
More informationWind Energy in the Southeast: Offshore and Land-Based Potential
Georgia Tech Clean Energy Speaker Series Southeast Wind Energy: Is An Answer Blowing in the Wind? September 29, 2010 Wind Energy in the Southeast: Offshore and Land-Based Potential Presented by Amir Mikhail,
More informationYour Maintenance in. Safe Hands. Wind Turbine Filters. From massive scale to critical detail
Your Maintenance in Safe Hands Wind Turbine From massive scale to critical detail Your Regular Maintenance Supplier of More than 30 years experience Competitive prices Technical support Spare parts & repair
More informationSmart Wind Turbine Solutions 2MW Platform
Smart Wind Turbine Solutions 2MW Platform Your Partner for Performance Proven technology Built with world-class components and a stateof-the-art control system, the 2MW platform turbines are engineered
More informationWindEYE nacelle LiDAR
WindEYE nacelle LiDAR AEP increases of 1-4% The WindEYE LiDAR Yaw misalignment correction Yaw misalignment occurs when the turbine is not aligned with the incoming wind, causing increased loads and reduced
More informationSiemens Gamesa Renewable Energy Unlocking Vietnam s Nearshore Wind Potential
Siemens Gamesa Renewable Energy Unlocking Vietnam s Nearshore Wind Potential Utilizing Siemens Gamesa Experience to De-Risk Your Nearshore Project June 7th 2018 2 Contents 1. Company profile 2. Product
More informationBENEFITS. Maximum output at minimum cost per kwh for medium wind sites. - Class IIA.
GAMESA G83-2.0 MW BENEFITS Maximum output at minimum cost per kwh for medium wind sites - Class IIA. - Pitch and variable speed technology to maximize energy production. - Production of lighter blades
More informationHedeager Aarhus N Denmark
Certificate No. This certificate is issued to for the wind turbine wind turbine class (class, standard, year) Vestas Wind Systems A/S Hedeager 42 8200 Aarhus N Denmark Vestas V126-3.45 MW / WT class S,
More informationBENEFITS. Maximum unit power with excellent performance for high winds. - Class IA/WZII/WZIII.
GAMESA G80-2.0 MW BENEFITS Maximum unit power with excellent performance for high winds - Class IA/WZII/WZIII. - Pitch and variable speed technology to maximize energy production. - Production of lighter
More informationAnnexe D1. Caractéristiques techniques des éoliennes REpower MM82 et MM92
Annexe D1 Caractéristiques techniques des éoliennes REpower MM82 et MM92 The 2-megaw 2-megawatt power power plant with 82 metre rotor diameter Technical data Design data Rated power Cut-in speed 3.5 m/s
More informationZPMC Ningbo Weilong Transmission Machinery Co., Ltd.
HW Series HW Slide Conductor Line + Wireless Communication System for Quayside Container Crane Trolley 2013 5 May, 2013 Edition ZPMC Ningbo Weilong Transmission Machinery Co., Ltd. I Overview 1 A B C 2
More informationGE Renewable Energy. GE s 3 MW Platform POWERFUL AND EFFICIENT.
GE Renewable Energy GE s 3 MW Platform POWERFUL AND EFFICIENT www.gerenewableenergy.com GE S 3 MW PLATFORM PITCH Since entering the wind industry in 2002, GE Renewable Energy has invested more than $2.5
More informationK2 Wind Community Liaison Committee Meeting #2 Wednesday, May 28, 2014
K2 Wind Community Liaison Committee Meeting #2 Wednesday, May 28, 2014 K2 Wind Background The K2 Wind Power Project is a 270 megawatt (MW) wind project being developed in the Township of Ashfield-Colborne-Wawanosh
More informationBusiness to Business Meetings Esbjerg German Offshore Wind. Martin Schmidt, windcomm schleswig-holstein
Business to Business Meetings Esbjerg 2009 German Offshore Wind Martin Schmidt, windcomm schleswig-holstein Agenda I. windcomm schleswig-holstein Schleswig-Holstein`s Network Agency for Wind Energy II.
More informationSHERWOOD HOUSE, KINGSMILL WAY, MANSFIELD, NOTTS, NG18 5ER. UNITED KINGDOM OFFICE TEL: +44 (0) FAX: +44 (0)
MAYOENGINEERING LTD SHERWOOD HOUSE, KINGSMILL WAY, MANSFIELD, NOTTS, NG18 5ER. OFFICE TEL: +44 (0)1623 651102 FAX: +44 (0)1623 414495 E-MAIL: sales@mayoengineering.com WEB SITE: www.mayoengineering.com
More informationEfficient, dependable and off the shelf. Pre-engineered gas-turbine driven pipeline compressor packages. Answers for energy.
Efficient, dependable and off the shelf Pre-engineered gas-turbine driven pipeline compressor packages Answers for energy. Siemens Pipeline Compressor Packages Siemens Pipeline Compressor Packages are
More informationInnovative and Efficient Power Supply and Material Transportation Solutions for Canada s Mining Industry
Innovative and Efficient Power Supply and Material Transportation Solutions for Canada s Mining Industry THEMENWORKSHOP Focus Kanada am 10. Dezember 2014 Dr. Ing. Roland Grafe Dipl. Ing. Till Krumbholz
More informationEXPERT REMANUFACTURED WIND TURBINE
EXPERT REMANUFACTURED WIND TURBINE Repowering Solutions is a division of Jeraneas Group of companies. Our core business is the remanufacturing of wind turbines of different sizes; a work that we have been
More informationHigher Performance for Gearboxes and Bearings in Wind Turbines.
Higher Performance for Gearboxes and Bearings in Wind Turbines. Wind Energy Automotive Marine Industry Content Company and Products Technology Scientific testing Examples of applications Sentient Science
More informationTHE NEXT GENERATION- YAW AND PITCH POSITION MONITORING
THE NEXT GENERATION- YAW AND PITCH POSITION MONITORING i n f o 2 company info The team of B-COMMAND has a long tradition and many years of experience in the Wind Power branch. The company with its headquarter
More informationTECHNO INDUSTRIES Material Handling Equipment Manufacturers
TECHNO INDUSTRIES Material Handling Equipment Manufacturers SINCE 1979 Tackle the load with TACKLERS About Techno Industries Established in the year 1979. TACKLERS brand Manufacturers, Suppliers & Exporters
More informationH4.6-3kW/H6.4-5kW/H8.0-10kW/H9.0-20kW. Technical Overview ANHUI HUMMER DYNAMO CO., LTD.
H4.6-3kW/H6.4-5kW/H8.0-10kW/H9.0-20kW Technical Overview H4.6-3kW/H6.4-5kW/H8.0-10kW/H9.0-20kW Wind Turbine System - Medium Model Project - Hummer is the manufacture specialized in small-to-medium wind
More informationInnovative Gearboxes for Wind Turbines
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Innovative Gearboxes for Wind Turbines The Drive & Control Company
More informationLIFECYCLE SERVICE SOLUTIONS
LIFECYCLE SERVICE SOLUTIONS GEARED FOR NEW ENERGY Moventas is the undisputed innovation & technology leader in the wind gearbox industry. As a pioneer in the segment with closer to 40 years of global service
More informationTechnical Documentation
Technical Documentation D-STRING Prevent cracks in the max chord region of the blade The D-String is a simple yet effective technology developed to eliminate cracks in the trailing edge max chord area
More information(43) International Publication Date WO 2014/ Al 15 May ( ) W P O P C T
(12) INTERNATIONAL APPLICATION PUBLISHED UNDER THE PATENT COOPERATION TREATY (PCT) (19) World Intellectual Property Organization International Bureau (10) International Publication Number (43) International
More informationEurope Offshore Wind Supply Chain: Responding to Growth
Europe Offshore Wind Supply Chain: Responding to Growth EWEA 2011 Brussels, 17 March 2011 Magnus Dale Analyst Magnus.Dale@ihs.com 2011 EMERGING ENERGY RESEARCH, LLC. All rights reserved. Reproduction of
More informationIntroduction CONTENT Future of offshore wind energy in Europe Offshore wind energy in Spain Alternatives to the transmission system to the grid Compar
OFFSHORE WIND FARM CONNECTIONS TO THE GRID Energy to Quality S.L. Santiago Arnaltes Gómez Introduction CONTENT Future of offshore wind energy in Europe Offshore wind energy in Spain Alternatives to the
More informationLIFECYCLE SERVICE SOLUTIONS
LIFECYCLE SERVICE SOLUTIONS GEARED FOR NEW ENERGY OUR SERVICE PROFESSIONALS ARE AVAILABLE AROUND THE WORLD. Moventas is the undisputed innovation & technology leader in the wind gearbox industry. As a
More informationHedeager Aarhus N Denmark
Certificate No. Wind Turbine This certificate is issued to for the wind turbine wind turbine class (class, standard, year) Vestas Wind Systems A/S Hedeager 42 8200 Aarhus N Denmark Vestas V105-3.45 MW
More informationHedeager Aarhus N Denmark S (IEC IB)*, :2005
Certificate No. This certificate is issued to for the wind turbine wind turbine class (class, standard, year) Vestas Wind Systems A/S Hedeager 42 8200 Aarhus N Denmark Vestas V117-3.45 MW / V117-3.60 MW
More informationOne Earth Opp. Magarpatta City Pune, India. Suzlon S120 DFIG 2.1MW (50 Hz)
Certificate No. This certificate is issued to for the wind turbine wind turbine class (class, standard, year) One Earth Opp. Magarpatta City Pune, 411028 India Suzlon S120 DFIG 2.1MW (50 Hz) S, IEC 61400-1
More informationSiemens G2 platform 2.3-MW geared wind turbines. Exceptional performance, proven reliability. Answers for energy.
Siemens G2 platform 2.3-MW geared wind turbines Exceptional performance, proven reliability Answers for energy. As the major driver of innovation with more than 30 years of experience, Siemens is the ideal
More informationHedeager Aarhus N Denmark
Certificate No. This certificate is issued to for the wind turbine wind turbine class (class, standard, year) Vestas Wind Systems A/S Hedeager 42 8200 Aarhus N Denmark Vestas V110-2 MW 60 Hz VCSS Mk 10
More informationM AG I CA RT. Wind power Uniquely used in handling of wind turbine parts for loading.
GH series M AG I CA RT MGC MOBILE GANTRY CRANE MADE IN CHINA Electricals equipment Lift Precast, Concrete, Block in Factory, construction site. Wind power Uniquely used in handling of wind turbine parts
More informationPioneer P750/49. The Premium 750 KW Wind Turbine. green. pioneer. go go with
Pioneer P750/49 The Premium 750 KW Wind Turbine green go go with pioneer Transforming the Power of Wind Corporate Profile Pioneer Wincon Private Limited (PWPL) is a member company of the Pioneer Asia Group
More informationThe worldwide wind power market has grown by. The next dimension
The next dimension The amount of wind power installed annually has reached a high level. Projects have become ever-bigger and require a joining of forces. Wind power companies are merging and energy companies
More informationDevelopment of Trailing Edge Flap Technology at DTU Wind
Development of Trailing Edge Flap Technology at DTU Wind Helge Aagaard Madsen Christina Beller Tom Løgstrup Andersen DTU Wind Technical University of Denmark (former Risoe National Laboratory) P.O. 49,
More informationVestas as a multibrand service partner
Vestas as a multibrand service partner Ida Sundahl Michael Richter Manager Supply Chain & Repair LATAM Director Multibrand Sales Development Vestas LATAM Vestas Global Services Vestas as a multibrand service
More informationProduct Presentation. September 09
Product Presentation September 09 Corporate History 1993: founded by a local engineering cooperative in Århus, DK 1994: first commercial turbine deployed; participates in RISØ testing program for small
More informationNew direct drive technologies of INNWIND.EU:
New direct drive technologies of INNWIND.EU: Superconducting vs. Pseudo Direct Drive Asger B. Abrahamsen, PhD Senior Research Scientist Wind Energy Denmark Wednesday 26-27 October 20 Battle of the wind
More informationAN OUTLINE HISTORY OF DANISH WIND TURBINE PRODUCTION: Output and Longevity from 1977 to 2014.
AN OUTLINE HISTORY OF DANISH WIND TURBINE PRODUCTION: Output and Longevity from 1977 to 214. Introduction The Danish Energy Agency (http://www.ens.dk/en/info/facts- figures/energy- statistics- indicators-
More informationSYSTEM SOLUTIONS FOR WIND POWER alkitronic Torque Multipliers and Services
SYSTEM SOLUTIONS FOR WIND POWER alkitronic Torque Multipliers and Services alkitronic: Your Partner for Wind Energy You ve got the applications. We ve got the solutions. Wind power systems need to resist
More informationIndustrial Range. Why Neumo...?
Why Neumo...? NEUMO opens the door to 1800 tonnes of Stainless Steel products. Our comprehensive stock range is carefully chosen to ensure NEUMO UK Ltd. can be your complete Stainless Steel logistics partner,
More informationVestas Product Offering V MW at a Glance. Renato Loureiro Gonçalves Wind & Site Engineer
Vestas Product Offering V150-4.2 MW at a Glance Renato Loureiro Gonçalves Wind & Site Engineer Content Introduction 3-5 4 MW Platform 6-9 Track Record 10-14 Performance Upgrades 15-22 Time to Market 23-24
More informationSARENS WILBERT Joint Venture
SARENS WILBERT Joint Venture specialists in special applications sale and rental worldwide WOLFF WK 60140B max. 45 t capacity WILBERT Heavy Lifters with up to 128 t capacity WT 905L e.tronic WT 1305L e.tronic
More informationMotors and Gearboxes for Wind Turbines. Durable Environmentally Friendly Low Maintenance
Motors and Gearboxes for Wind Turbines Durable Environmentally Friendly Low Maintenance Reliability in Many Areas ABM develops and manufactures innovative drive solutions of highest quality. As a single
More informationCOMPANY PRESENTATION SPECIALISTS IN SEALING SOLUTIONS FOR HEAVY DUTY APPLICATIONS
COMPANY PRESENTATION SPECIALISTS IN SEALING SOLUTIONS FOR HEAVY DUTY APPLICATIONS WE DON T SUPPLY JUST SEALS WE WANT THE CUSTOMER TO SAVE MONEY HOW? - WE ANALYSE THE APPLICATION - WE SUPPLY LONG-LASTING
More informationSTATE OF THE ART and NEW TECHNOLOGIES OF DIRECT DRIVE WIND TURBINES
STATE OF THE ART and NEW TECHNOLOGIES OF DIRECT DRIVE WIND TURBINES Klinger, Friedrich - Müller, Lukas INNOWIND Forschungsgesellschaft mbh, Germany in cooperation with Fraunhofer IWES Altenkesseler Str.
More informationFred. Olsen Pioneering in Wind Windcluster Norway s førjulstreff. Martin Degen Commercial Manager Trondheim, 03 December 2015
Fred. Olsen Pioneering in Wind Windcluster Norway s førjulstreff Martin Degen Commercial Manager Trondheim, 03 December 2015 Navigating in a shifting world 1928 1946 1965 1974 1986 1914 1994 1897 2012
More informationYour Maintenance in. Safe Hands. Wind Turbine Filters. From massive scale to critical detail
Your Maintenance in Safe Hands Wind Turbine From massive scale to critical detail Your Regular Maintenance Supplier of More than 30 years experience Competitive prices Technical support Spare parts & repair
More information