Yellow Point WARNING NEVER EXCEED PUBLISHED WORKING LOAD LIMIT. Catalog No YP. Copyright 2017 YOKE Industrial Corp. All Rights Reserved.
|
|
- Lindsey Rogers
- 6 years ago
- Views:
Transcription
1 Yellow Point Catalog No YP
2 2
3 3
4 Yellow Point 4
5 Worldwide Quality Type Approval And Certificate: 5
6 Quality Control, Testing, and Detecting during manufacturing YOKE runs a constant and strict production facility with quality control in every manufacturing stage from raw materials to the completed product. YOKE is an ISO 9001 certified company and has Type Approval by the major international authorities from Deutsche Gesetzliche Unfallversicherung (DGUV), ABS, API, and DNV. YOKE has achieved CNLA certification - Chinese National Laboratory Accreditation which ensures a quality research and development (R&D) department and unsurpassed product engineering. Magnaflux Crack Detection: All forged components are individually magnaflux detected after heat treatment. Proof Load Testing: YOKE Yellow Points are proof load qualified to 2.5 times the Working Load Limit within 1% permanent deformation. Dynamic Fatigue Testing: Batch samples of YOKE Yellow Points are Dynamic Fatigue Tested to 20,000 cycles at 1.5 times the Working Load Limit. Ultimate Breaking Load Testing: Batch samples are tested in a static tensile testing machine until failure. Minimum ultimate force equals to the Working Load Limit times safety factor. Spectrographic Analysis: To assure of the proper metallurgy content of all raw materials. Test certificate Complied to EN
7 P8 P14 P20 P24 Safety is our first priority TM - Quality, Reliability, Innovation - P29 P34 P38 P44 P46 P50 P52 P53 7
8 Rotates through 360 and pivot 180. SW S 90 Pivot Manufactured from alloy steel, quenched and tempered. Manufactured and tested in accordance with EN A D G B Load rated parts are 100% magnaflux crack detected. Individual forged parts and cap screw are traceable to Test Certification. F Bolts are Metric thread (ASME / ANSI B18.3.1M), specification is grade 12.9 alloy socket head screw per DIN EN ISO H C Individually proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. M E 360 Rotation All YOKE Lifting points meet or exceed all the requirements of ASME B Quick and simple assembly, just a tapped hole is required.»» Taiwan Patent : I468602»» China Patent : ZL Lifting Point Metric Thread (8-211) Item No. Working Load Limit Thread version Dimensions Torque in N.W. M E Pitch A B C D F G H S SW tonnes mm mm DIN13 mm Nm kg M M M M M M M M M M M M M M M * Design Factor 4:1 * Bolt in GEOMET finished on request 8
9 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) M M M M M M M M M M M M M M M
10 Rotates through 360 and pivot 180. SW S 90 Pivot Manufactured from alloy steel, quenched and tempered. Manufactured and tested in accordance with EN A D G B Load rated parts are 100% magnaflux crack detected. Individual forged parts and cap screw are traceable to Test Certification. F Bolts are Metric thread (ASME / ANSI B18.3.1M), specification is grade 12.9 alloy socket head screw per DIN EN ISO H C Individually proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. M E 360 Rotation All YOKE Lifting points meet or exceed all the requirements of ASME B Quick and simple assembly, just a tapped hole is required.»» Taiwan Patent : I468602»» China Patent : ZL Lifting Point UNC Thread (8-212) Item No. Working Load Limit Thread version Dimensions Torque in N.W. M E TPI A B C D F G H S SW tonnes inch inch inch Nm lbs / UNC /16 3/ / UNC /8 15/ / UNC /2 1 1/ / UNC /8 1 5/ UNC /8 1 1/ / UNC /8 1 7/ / UNC / / UNC / UNC / * Design Factor 4:1 * Bolt in GEOMET finished on request 10
11 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(lbs) / / / / / / /
12 90 Pivot Rotates through 360 and pivot 180. Manufactured from alloy steel, quenched and tempered. Manufactured and tested in accordance with EN Load rated parts are 100% magnaflux crack detected. Individual forged parts and cap screw are traceable to Test Certification. SW S Bolts are Metric thread (ASME / ANSI B18.3.1M), specification is grade 12.9 alloy socket head screw per DIN EN ISO A G B 360 Rotation Individually proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. D All YOKE Lifting points meet or exceed all the requirements of ASME B F Quick and simple assembly, just a tapped hole is required. H C E»» Taiwan Patent : I468602»» China Patent : ZL M Lifting Point Long Bolt Metric Thread (8-211) Item No. Working Load Limit Thread version Dimensions Torque in N.W. M E Pitch A B C D F G H S SW tonnes mm mm DIN13 mm Nm kg /105L 0.3 M /125L 0.63 M /150L 1 M /185L 1.5 M /230L 2.5 M /265L 4 M /340L 5 M /300L 8 M /350L 10 M /350L 15 M /385L 20 M * Design Factor 4:1 * Bolt in GEOMET finished on request 12
13 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) /105L M /125L M /150L M /185L M /230L M /265L M /340L M /300L M /350L M /350L M /385L M
14 SW S 180 Pivot Rotates through 360 and pivot 180, and simultaneously allows lifting from any direction. Manufactured from forged alloy steel, quenched and tempered. D R Manufactured and tested in accordance with EN Load rated parts are 100% magnaflux crack detected. F B Individual forged parts and cap screw are traceable to Test Certification. Bolt are Metric thread (ASME / ANSI B18.3.1M). C H Proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. E M A G 360 Rotation All YOKE Lifting points meet or exceed all the requirements of ASME B Quick and simple assembly, just a tapped hole is required.»» Taiwan Patent : I468602»» China Patent : ZL Anchor Point Metric Thread (8-231) Item No. Working Load Limit Thread version Dimensions Torque in N.W. tonnes M E Pitch A B C D F G H R S SW 5:1 4:1 mm mm DIN13 mm Nm kg M M M M M M M M M M M M M M M * Proof Load is 2.5 times the Working Load Limit on the 4:1 design factor. * Bolt in GEOMET finished on request 14
15 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) M M M M M M M M M M M M M M M
16 SW S 180 Pivot Rotates through 360 and pivot 180, and simultaneously allows lifting from any direction. Manufactured from forged alloy steel, quenched and tempered. D R Manufactured and tested in accordance with EN Load rated parts are 100% magnaflux crack detected. F B Individual forged parts and cap screw are traceable to Test Certification. Bolt are Metric thread (ASME / ANSI B18.3.1M). C H Proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. E M A G 360 Rotation All YOKE Lifting points meet or exceed all the requirements of ASME B Quick and simple assembly, just a tapped hole is required.»» Taiwan Patent : I468602»» China Patent : ZL Anchor Point UNC Thread (8-232) Item No. Working Load Limit Thread version Dimensions Torque in N.W. tonnes M E TPI A B C D F G H R S SW 5:1 4:1 inch inch inch Nm lbs / UNC /16 3/ / UNC /8 15/ / UNC /2 1 1/ / UNC /8 1 5/ UNC /8 1 1/ / UNC /8 1 7/ / UNC / UNC / * Proof Load is 2.5 times the Working Load Limit on the 5:1 design factor. * Bolt in GEOMET finished on request 16
17 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) / / / / / /
18 SW S 180 Pivot Rotates through 360 and pivot 180, and simultaneously allows lifting from any direction. Manufactured from forged alloy steel, quenched and tempered. D R Manufactured and tested in accordance with EN Load rated parts are 100% magnaflux crack detected. F B Individual forged parts and cap screw are traceable to Test Certification. C H Bolt are Metric thread (ASME / ANSI B18.3.1M). Proof tested to 2.5 times the WLL. E 360 Rotation Fatigue rated to 1.5 times the WLL. All YOKE Lifting points meet or exceed all the requirements of ASME B M A G Quick and simple assembly, just a tapped hole is required.»» Taiwan Patent : I468602»» China Patent : ZL Anchor Point Long Bolt Metric Thread (8-231) Item No. Working Load Limit Thread version Dimensions Torque in N.W. tonnes M E Pitch A B C D F G H R S SW 5:1 4:1 mm mm DIN13 mm Nm kg /105L M /125L M /150L M /185L M /230L M /265L M /340L M /300L M /350L M /385L M * Proof Load is 2.5 times the Working Load Limit on the 4:1 design factor. * Bolt in GEOMET finished on request 18
19 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) /105L M /125L M /150L M /185L M /230L M /265L M /340L M /300L M /350L M /385L M
20 X X X W C Rotates through 360 adjustable in the direction of the load. B D A Manufactured from alloy steel, quenched and tempered. Captive bolt with high WLL. Manufactured and tested in accordance with EN E M S F 360 Rotation Load rated parts are 100% magnaflux crack detected. Individual forged parts and cap screw are traceable to Test Certification. Load direction z Bolts are Metric thread (ASME / ANSI B18.3.1M), specification is grade 10.9 alloy socket head screw per DIN EN ISO Proof tested to 2.5 times the WLL. X Fatigue rated to 1.5 times the WLL. X All YOKE Lifting points meet or exceed all the requirements of ASME B X Quick and simple assembly, just a tapped hole is required. -Nominal WLL- Vertical load -straight pull- ()-Values»» Chinese Patent : ZL »» French Patent : »» Australian Patent : Key Eye Point Metric Thread (8-291K) Item No. Working Load Limit Thread version Dimensions Torque in N.W. tonnes M E Pitch A B C D F S SW X (Z) mm mm DIN13 mm Nm kg 8-291K (1) M K (1) M K (2) M K (4) M K (6) M K (8) M K (12) M K (16) M K (24) M K (32) M K (32) M K (32) M * Proof Load is 2.5 times the Working Load Limit on the 4:1 design factor. * Bolt in GEOMET finished on request 20
21 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) M M M M M M M M M M M M
22 X X X W C Rotates through 360 adjustable in the direction of the load. B D A Manufactured from alloy steel, quenched and tempered. Captive bolt with high WLL. Manufactured and tested in accordance with EN E M S F 360 Rotation Load rated parts are 100% magnaflux crack detected. Individual forged parts and cap screw are traceable to Test Certification. Load direction z Bolts are Metric thread (ASME / ANSI B18.3.1M), specification is grade 10.9 alloy socket head screw per DIN EN ISO Proof tested to 2.5 times the WLL. X Fatigue rated to 1.5 times the WLL. X All YOKE Lifting points meet or exceed all the requirements of ASME B X Quick and simple assembly, just a tapped hole is required. -Nominal WLL- Vertical load -straight pull- ()-Values»» Chinese Patent : ZL »» French Patent : »» Australian Patent : Key Eye Point UNC Thread (8-292K) Item No. Working Load Limit Thread version Dimensions Torque in N.W. tonnes M E TPI A B C D F S W X (Z) inch inch inch Nm lbs 8-292K (1) 5/ UNC K (1) 3/ UNC K (2) 1/ UNC K (4) 5/ UNC K (6) 3/ UNC K (6) 7/ UNC K (8) UNC K (12) 1 1/ UNC K (16) 1 1/ UNC K (24) 1 3/ UNC K (32) UNC * Proof Load is 2.5 times the Working Load Limit on the 4:1 design factor. * Bolt in GEOMET finished on request 22
23 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) 8-292K-003 5/ K-004 3/ K-007 1/ K-015 5/ K-023 3/ K-025 7/ K K / K / K / K
24 E D F A B C 180 Pivot 360 Rotation Swings more than 180, rotates through 360 due to its unique ball bearing design. Secured four times against breakage in all load directions. Manufactured from forged alloy steel, quenched and tempered. Manufactured and tested in accordance with EN M K G Ball Bearing Inside Load rated parts are 100% magnaflux crack detected. Individual forged parts and cap screw are traceable to Test Certification. Proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. Load direction z All YOKE Lifting points meet or exceed all the requirements of ASME B Easy to attach or dismantle due to the forged hexagon shaped body of the Super Point. Worst case -Nominal WLL- Ring not adjusted to pull direction x y Manually adjusted -increased WLL- ( )-Values Vertical load -straight pull- [ ]-Values Maximum WLL in axial direction when load ring is aligned. Capable of rotating under load. Do not turn continuously in 90 degree direction at full load. Swivel Point Metric Thread (8-271) Item No. Working Load Limit Thread version Dimensions (mm) Torque in N.W. y ( z ) M E Pitch G C K F D B A tonnes mm mm DIN13 mm Nm kg M M M M M M M M M M M M M * Proof Load is 2.5 times the Working Load Limit on the 4:1 design factor. * Bolt in GEOMET finished on request * Please refer to table for specification M72 24
25 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) M M M M M M M M M M M M M * Please refer to table for specification M72 25
26 E D F A B C 180 Pivot 360 Rotation Swings more than 180, rotates through 360 due to its unique ball bearing design. Secured four times against breakage in all load directions. Manufactured from forged alloy steel, quenched and tempered. Manufactured and tested in accordance with EN M K G Ball Bearing Inside Load rated parts are 100% magnaflux crack detected. Individual forged parts and cap screw are traceable to Test Certification. Proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. Load direction z All YOKE Lifting points meet or exceed all the requirements of ASME B Easy to attach or dismantle due to the forged hexagon shaped body of the Super Point. Worst case -Nominal WLL- Ring not adjusted to pull direction x y Manually adjusted -increased WLL- ( )-Values Vertical load -straight pull- [ ]-Values Maximum WLL in axial direction when load ring is aligned. Capable of rotating under load. Do not turn continuously in 90 degree direction at full load. Swivel Point UNC Thread (8-272) Item No. Working Load Limit Thread version Dimensions Torque in N.W. y ( z ) M E TPI G C K F D B A tonnes inch inch inch Nm lbs / UNC / UNC / UNC / UNC UNC / UNC / UNC / UNC UNC / UNC / UNC * Proof Load is 2.5 times the Working Load Limit on the 4:1 design factor. * Bolt in GEOMET finished on request * Please refer to table for specification 3-4UNC. 26
27 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) / / / / / / / / / * Please refer to table for specification 3-4UNC. 27
28 28
29 D F A K G B C Swings more than 180, rotates through 360 due to its unique ball bearing design. Secured four times against breakage in all load directions. Manufactured from forged alloy steel, quenched and tempered. Manufactured and tested in accordance with EN Load rated parts are 100% magnaflux crack detected. Fatigue rated to 1.5 times the WLL. All YOKE Super points meet or exceed all the requirements of ASME B Easy to attach or dismantle due to the forged hexagon shaped body of the Super Point. E M Super Point Metric Thread (8-251) Super Point UNC Thread (8-252) * Proof Load is 2.5 times the Working Load Limit on the 4:1 design factor. * Bolt in GEOMET finished on request 29
30 D A Super Point Metric Thread (8-251) Item No. 30 E Working Load Limit Thread version Dimensions M y (z) M E TPI G C K F D B A F K G B C Torque in tonnes mm mm DIN13 mm Nm kg M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M N.W.
31 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) M M M M M M M M M M M M M M M M M M M M M M M M M M M M
32 D A Swings more than 180, rotates through 360 due to its unique ball bearing design. F B Secured four times against breakage in all load directions. Manufactured from forged alloy steel, quenched and tempered. Manufactured and tested in accordance with EN C Load rated parts are 100% magnaflux crack detected. Fatigue rated to 1.5 times the WLL. All YOKE Super points meet or exceed all the requirements of ASME B K G Easy to attach or dismantle due to the forged hexagon shaped body of the Super Point. E M Super Point UNC Thread (8-252) Item No. Working Load Limit Thread version Dimensions Torque in N.W. y (z) M E TPI G C K F D B A tonnes inch inch inch Nm lbs / UNC / UNC / UNC / UNC UNC / UNC / UNC / UNC / UNC / UNC UNC / UNC / UNC / UNC / UNC
33 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) / / / / / / / / / / / / /
34 Digitally Signed By: Location: DNV GL Høvik, Norway Signing Date: This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed. Form code: TA 1411a Revision: Page 1 of 4 DNV GL DNV GL and the Horizon Graphic are trademarks of DNV GL AS. D A B 180 Pivot Swings more than 180, rotates through 360 due to its unique ball bearing design. Secured four times against breakage in all load directions. F C Manufactured from forged alloy steel, quenched and tempered. E Manufactured and tested in accordance with EN and DNVGL ST M K G 360 Rotation Load rated parts are 100% magnaflux crack detected. Individual forged parts and cap screw are traceable to Test Certification. Proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. Certificate No: TAS00000T4 All YOKE Lifting points meet or exceed all the requirements of ASME B This is to certify: That the Chain, shackles, swivels, sockets with type designation(s) Lifting points DA-271 for offshore cranes Issued to Yoke Industrial Corp. Taichung, Taiwan -40 C Easy to attach or dismantle due to the forged hexagon shaped body of the Super Point. is found to comply with DNV GL standard DNVGL-ST-0378 Standard for offshore and platform lifting appliances Application : Product(s) approved by this certificate is/are accepted for installation on all vessels classed by DNV GL. Load direction z Maximum WLL in axial direction when load ring is aligned. This Certificate is valid until Issued at Høvik on DNV GL local station: Kaohsiung Approval Engineer: Antonio Sendin Alvarez for DNV GL Aldo Matteucci Head of Section y Capable of rotating under load. Do not turn continuously in 90 degree direction at full load. Design temperature -20 C Manually adjusted -increased WLL- ( )-Values Vertical load -straight pull- [ ]-Values DA Swivel Point Metric Thread (DA-271) DNVGL-ST-0378 (Offshore crane- Lifting Appliance) Item No. Working Load Limit Thread version Dimensions (mm) Torque in N.W. y (z) M E Pitch G C K F D B A tonnes mm mm DIN13 mm Nm kg DA M DA M DA M DA M DA M DA M DA M DA M DA M DA M DA M DA M DA M DA (48) [50] M
35 Offshore Lifting -40 C Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) DA M (0.4) 0.6 (0.8) DA M (0.6) 0.9 (1.2) DA M (0.7) 1.2 (1.5) DA M (1.5) 2.6 (3) DA M (2.5) 4 (5) DA M (4) 7 (8) DA M (6) 10 (12) DA M (6.7) 13.4(13.4) DA M (10) 16 (20) 11.2 (14) 8 (10) 8 (10) 16.8 (21) 12 (15) 8 (10) DA M (13) 26 (26) 18.2 (18.2) 13 (13) 13 (13) 27.3 (27.3) 19.5 (19.5) 13 (13) DA M (16) 28 (32) 19.6 (22.4) 14 (16) 14 (16) 29.4 (33.6) 21 (24) 14 (16) DA M (20) 40 (40) 28 (28) 20 (20) 20 (20) 42 (42) 30 (30) 20 (20) DA M (22) 40 (44) 28 (30.8) 20 (22) 20 (22) 42 (46.2) 30 (33) 20 (22) DA M (22) 40 (44) 28 (30.8) 20 (22) 20 (22) 42 (46.2) 30 (33) 20 (22) DA M (40) 80 (80) 56 (56) 40 (40) 40 (40) 84 (84) 60 (60) 40 (40) DA M (48) 80 (96) 56 (67.2) 40 (48) 40 (48) 84 (100) 60 (72) 40 (48) DA M (48) 80 (96) 56 (67.2) 40 (48) 40 (48) 84 (100) 60 (72) 40 (48) 35
36 D A B 180 Pivot Swings more than 180, rotates through 360 due to its unique ball bearing design. Secured four times against breakage in all load directions. F C Manufactured from forged alloy steel, quenched and tempered. E Manufactured and tested in accordance with EN and DNV ST M Load direction K G z 360 Rotation Load rated parts are 100% magnaflux crack detected. Individual forged parts and cap screw are traceable to Test Certification. Proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. y All YOKE Lifting points meet or exceed all the requirements of ASME B Easy to attach or dismantle due to the forged hexagon shaped body of the Super Point. Manually adjusted -increased WLL- ( )-Values Vertical load -straight pull- [ ]-Values Maximum WLL in axial direction when load ring is aligned. Capable of rotating under load. Do not turn continuously in 90 degree direction at full load. Design temperature -20 C DA Swivel Point UNC Thread (DA-272) Item No. Working Load Limit Thread version Dimensions (mm) Torque in N.W. y (z) M E TPI G C K F D B A tonnes inch inch inch Nm lbs DA / UNC DA / UNC DA / UNC DA / UNC DA UNC DA / UNC DA / UNC DA / UNC DA UNC DA / UNC DA / UNC
37 Offshore Lifting -40 C Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) DA / (0.7) 1.2 (1.5) DA / (1.5) 2.6 (3) DA / (2) 3.6(4) DA / (2.5) 4 (5) DA (4) 7 (8) DA / (6) 10 (12) DA / (10) 16 (20) 11.2 (14) 8 (10) 8 (10) 16.8 (21) 12 (15) 8 (10) DA / (13) 26 (26) 18.2 (18.2) 13 (13) 13 (13) 27.3 (27.3) 19.5 (19.5) 13 (13) DA (16) 28 (32) 19.6 (22.4) 14 (16) 14 (16) 29.4 (33.6) 21 (24) 14 (16) DA / (20) 40 (40) 28 (28) 20 (20) 20 (20) 42 (42) 30 (30) 20 (20) DA / (22) 40 (44) 28 (30.8) 20 (22) 20 (22) 42 (46.2) 30 (33) 20 (22) DA (40) 80 (80) 56 (56) 40 (40) 40 (40) 84 (84) 60 (60) 40 (40) DA / (40) 80 (80) 56 (56) 40 (40) 40 (40) 84 (84) 60 (60) 40 (40) DA (40) 80 (80) 56 (56) 40 (40) 40 (40) 84 (84) 60 (60) 40 (40) 37
38 D B Rotates through 360 and pivot 180, rated at 100% at 90 angle. Manufactured from forged alloy steel, quenched and tempered. F Manufactured and tested in accordance with EN Load rated parts are 100% magnaflux crack detected. E G M A Individual forged parts and cap screw are traceable to Test Certification. Bolt are Metric thread (ASME / ANSI B18.3.1M). Proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. All YOKE Lifting points meet or exceed all the requirements of ASME B Quick and simple assembly, just a tapped hole is required. Red label is for metric thread. Ring Point Metric Thread (8-241) Item No. Working Load Limit Thread version Dimensions Torque in N.W. 5:1 4:1 M E Pitch A B C D F G H R S SW tonnes mm mm DIN13 mm Nm kg M M M M M M M M M M * Proof Load is 2.5 times the Working Load Limit on the 4:1 design factor. * Bolt in GEOMET finished on request 38
39 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) M M M M M M M M M M
40 D B Rotates through 360 and pivot 180, rated at 100% at 90 angle. Manufactured from forged alloy steel, quenched and tempered. F Manufactured and tested in accordance with EN Load rated parts are 100% magnaflux crack detected. E G M A Individual forged parts and cap screw are traceable to Test Certification. Bolt are Metric thread (ASME / ANSI B18.3.1M). Proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. All YOKE Lifting points meet or exceed all the requirements of ASME B Quick and simple assembly, just a tapped hole is required. Blue label is for UNC thread. Ring Point UNC Thread (8-242) Item No. Working Load Limit Thread version Dimensions Torque in N.W. 5:1 4:1 M E TPI A B C D F G H R S SW tonnes inch inch inch Nm lbs / UNC /16 3/ / UNC /8 15/ / UNC /2 1 1/ / UNC /8 1 5/ UNC /8 1 1/ / UNC /8 1 7/ / UNC / UNC / * Proof Load is 2.5 times the Working Load Limit on the 5:1 design factor. * Bolt in GEOMET finished on request 40
41 Kind of attachment Number of legs Load direction unsymm unsymm. Item No. Thread WLL(t) / / / / / /
42 y PSA 42
43 y PSA 43
44 W C PSA - Lifting point to be as an anchor point for personal protective equipment. D Rotates through 360 B A Manufactured from forged alloy steel, quenched and tempered. E Load rated parts are 100% magnaflux crack detected. Passed 22.2 KN/person Load testing. M F 360 Rotation Passed 150 kg dynamic fall testing ( EU standard is 100 kg). S Meets all requirements of the German BG BAU ( Employer s insurance association of the building industry). y PSA Meets all requirements of DIN EN795, DIN EN50308, OSHA Acc. to DIN EN 365 including statement for the number of load bearing persons is 1-2 persons. Correspond to the European Directive for personnel protection equipment (89/686/ EWG). YOKE yellow powder coating for high visibility. PSA-YEP Metric Thread (8-281) Item No. Working Load Limit Thread version Dimensions (mm) Torque in N.W. M A B C D E F S W Nm kg Pers M12 x Pers M16 x Pers M20 x PSA-YEP UNC Thread (8-281) Item No. Working Load Limit Thread version Dimensions (inch) Torque in N.W. M A B C D E F S W ft. lbs lbs Pers M12 x Pers M16 x Pers M20 x
45 W C PSA-INOX Lifting point to be as an anchor point for personal protective equipment. D Rotates 360. B A Manufactured from forged stainless steel. Load rated parts are 100% magnaflux crack detected. E Passed 22.2KN/person load testing. M F 360 Rotation Passed 150 kg dynamic fall testing ( EU standard is 100 kg). S Meets all requirements of the German BG BAU ( Employer s insurance association of the building industry). Meets all requirements of DIN EN795, DIN EN50308, OSHA y PSA Acc. to DIN EN 365 including statement for the number of load bearing persons is 1-2 persons. Corresponds to the European Directive for personnel protection equipment (89/686/ EWG). YOKE yellow powder coating for high visibility. Suitable for permanently outdoor application. PSA-INOX-YEP Metric Thread (8-285) Item No. Working Load Limit Thread version Dimensions (mm) Torque in N.W. M A B C D E F S W Nm kg Pers M12 x Pers M16 x Pers M20 x PSA-INOX-YEP UNC Thread (8-285) Item No. Working Load Limit Thread version Dimensions (inch) Torque in N.W. M A B C D E F S W ft. lbs lbs Pers M12x Pers M16x Pers M20x
46 R Pivots 180 and allows side load lifting. Manufactured from forged alloy steel, quenched and tempered. L Manufactured and tested in accordance with EN B K Load rated parts are 100% magnaflux crack detected. Individual forged parts are traceable to Test Certification. N A Supplied without bolts; usage of Grade 10.9 or Grade 12.9 bolts is recommended. Individually proof tested to 2.5 times the WLL. D Fatigue rated to 1.5 times the WLL. All YOKE Lifting points meet or exceed all the requirements of ASME B H F Bolt-on Tie Down. Code DAB. Designed with spring, stop at any angle supplied without bolt (8-058) Item No. Working Load Limit Dimensions (mm) N.W. tonnes A B D F H K L N R kg T T T * Design factor 5:1 * Bolts of grade 10.9 & 12.9 are recommended 46
47 Weld-on Lifting Points 47
48 Economic Point Weld-on Point Weld-on Ring Weld-on Hook Kind of attachment Number of legs Load direction unsymm unsymm. Item No. WLL(t) T T T T T
49 WELDING INSTRUCTIONS The welding should only be carried out by qualified welder according to Standards, e.g. EN 287 or AWS. Support material Material of the welding block is S355J2+N ( N, St 52-3N, B.S D, AISI 1019 etc.). Prior to welding, the contact areas must be free from impurities, oil, paint, rust, scale, etc., for example by grinding. If the surface is at all corroded, all rust must be completely removed from the weld area. Painted surface must be prepared in the same way. The steel support member must have a carbon content of no more than 0.40%. In ambient temperature of 10ºC and below, pre-heating of the weld area prior to welding must be carried out. Seam welding The welds must be sufficiently strong to take the required loads. Before starting the final weld pass, clean well the root pass to avoid inclusions. The complete welding operation must be carried out continuously so that the parts do not have time to cool. Effects of temperature The complete construction can be annealed stress release at <600 C without reduction of WLL. Do not rapidly cool the weld. A thorough inspection of the weld should be performed. No cracks, pitting, inclusions, notches or undercuts are allowed. If doubt exists, use a suitable NDT method, such as magnetic particle or liquid penetrant to verify. If repair is required, grind out the defect and re-weld using the original qualified procedure. Welding materials Weld materials must have a minimum tensile strength of 70,000 PSI (such as AWS A5.1 E-7018), following the electrode manufacturer s recommendations. Reference information as below: MIG arc welding: Wire diameter as per DIN 8559-SG 3, AWS A Important: do not weld in the open air during bad weather 49
50 I C Pivots through 180. Manufactured from forged alloy steel, quenched and tempered. Manufactured and tested in accordance with EN Load rated parts are 100% magnaflux crack detected. Individual forged parts are traceable to Test Certification. Proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. All YOKE Lifting points meet or exceed all the requirements of ASME B T H F WLL forged onto each product for quick and easy identification. Lugs designed to assist the welding process. W A K L a HV Weld-on Point without Spring Inside Item No. Working Load Limit Dimensions (mm) N.W. tonnes* A C D E F H K L W HV a kg ** ** * Design factor 5:1 ** Design factor 4:1 50
51 R E Pivots through 180. Manufactured from forged alloy steel, quenched and tempered. L Manufactured and tested in accordance with EN K Load rated parts are 100% magnaflux crack detected. W A D 180 Pivot Individual forged parts are traceable to Test Certification. Proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. All YOKE Lifting points meet or exceed all the requirements of ASME B WLL forged onto each product for quick and easy identification. Lugs designed to assist the welding process. H F A protected spring keeps the load ring in a required position. The parts are connected in such a way that they remain captive. The spring also reduces noise caused by vibrations. Stop at Any Angle Weld-on Point. Code DAA. Designed with spring, stop at any angle Item No. Working Load Limit Dimensions (mm) N.W. tonnes A B D F H K L N R kg T T T T T * Design factor 5:1 51
52 B D Pivots 180, designed minimizes head room A Manufactured from forged alloy steel, quenched and tempered. M L C 180 Pivot Manufactured and tested in accordance with EN Load rated parts are 100% magnaflux crack detected. 180 Pivot The two points of attachment facilitate an even and optimal force distribution into the work piece and thus, usage of thinner base plates is possible. The welding block is forged out of material with excellent welding properties. b a E F Low profile design with high strength. The ring is stowable thus avoiding the hazards of tripping and snagging. Weld-on Ring Item No. Working Load Limit Dimensions (mm) N.W. tonnes A B C D E F L M a b kg * Design factor 4:1 52
53 A P Pivots through 180. Manufactured from forged alloy steel, quenched and tempered. Manufactured and tested in accordance with EN W Load rated parts are 100% magnaflux crack detected. H Individual forged parts are traceable to Test Certification. M T L Proof tested to 2.5 times the WLL. Fatigue rated to 1.5 times the WLL. All YOKE Lifting points meet or exceed all the requirements of ASME B WLL forged onto each product for quick and easy identification. Lugs designed to assist the welding process. A protected spring keeps the load ring in a required position. The parts are connected in such a way that they remain captive. The spring also reduces noise caused by vibrations. F Weld-on Hook Item No. Working Load Limit Dimensions (mm) N.W. tonnes A F H L M P T W kg * Design factor 5:1 YOKE recommends that the working load limit should be reduced to meet any appropriate legislative requirements, if welding on to an excavator. Please contact your YOKE distributors for further information. 53
54 54
55 Yellow Point 55
56 An ISO 9001 Registered Company VIDEO EN YOKE INDUSTRIAL CORP. #39, 33rd Road, Taichung Industrial Park, Taichung 407, TAIWAN Tel: Fax: Catalog No YP / /210X297
Safety is our first priority TM
Safety is our first priority T Catalog No. -2013.YP1 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED
More informationYellow Point. Catalog No YP.1
Yellow Point Catalog No. -2014.YP.1 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
More informationYellow Point. Catalog No YP.2
Yellow Point Catalog No. 8-15.YP.2 2 3 T YOKE Yellow Point Series NEVER EXCEED PUBLISHED WORKING LOAD LIIT 4 Worldwide Quality Type Approval And Certificate: 5 NEVER EXCEED PUBLISHED WORKING LOAD LIIT
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAS00000K9 This is to certify: That the Chain, shackles, swivels, sockets with type designation(s) Wide Body Shackles Issued to Crosby Group LLC Tulsa OK, United
More informationSafety is our first priority
8-2014 TM Safety is our first priority General Catalog No. 8-2014 General Catalog No. 8-2014/1040312/210X297 Europe-100 General Catalog No. 8-2014 Producer logo Product code Size Working Load Limit size
More informationThis is to certify: Application : Certificate No: TAS000011V. That the Lifting set for Offshore containers and Portable Offshore Units
Certificate No: TAS000011V This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) Green Pin Standard and Green Pin Polar shackles Issued to
More informationThis is to certify: Application : Certificate No: TAS000011V Revision No: 1. That the Lifting set for Offshore containers and Portable Offshore Units
Certificate No: TAS000011V Revision No: 1 This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) Green Pin Standard and Green Pin Polar shackles
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K3 Revision No: 1 This is to certify: That the Check Valve with type designation(s) 05414, 05417, 05419, 05714, 05717, 05719 Issued to Herose GmbH Armaturen
More informationBolt-on Swivel Load Rings with Link - RUD VLBG with optional bolt lengths.
1 of 5 11/03/2015 11:15 (/) RUD "VLBG" Bolt-on Swivel Hoisting Rings, Rotating Swivel Eye Bolts. Metric & Imperial Thread - Range from 300kg to 20,000kg Model: RUD VLBG / BSLR-56 Quick Ref: BSLR-56 Bolt-on
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K7 Revision No: 1 This is to certify: That the Safety Valve with type designation(s) Safety valves with bellow seal, Types: 06800, 06801, 06805, 06806
More informationICE-LBG-SR. ICE Load ring for bolting Super Rotation
HUMANES DE MADRID CP 28970 (MADRID) ICE Load ring for bolting Super Rotation 18 RUD Ketten Rieger & Dietz GmbH u. Co. KG MADE IN GERMANY ICE-bolt with revolutionary mechanical characteristics No loosening
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: A-14136 File No: 899.60 Job Id: 262.1-018818-1 This is to certify: That the Peripheral Equipment with type designation(s) Ha-VIS econ 2000 series, econ 3000 series
More informationGunnebo Lifting Offshore programme - accessories. High consistent quality generates long durability and safety
Gunnebo Lifting Offshore programme - accessories High consistent quality generates long durability and safety DNV 2.7-1 certificate We are certified by DNV to make type approval in 271 quality (Offshore
More informationDOCK AND SHIP TO SHIP HOSE
DOCK AND SHIP TO SHIP ALFAGOMMA // APPLICATIONS 2 www.alfagomma.com ALFAGOMMA // CERTIFICATE // ALFAGOMMA DOCK AND SHIP TO SHIP RANGE ALFAGOMMA has developed a range of dock and ship to ship hoses to meet
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TE00001J9 This is to certify: That the Frequency Converter with type designation(s) NXS Issued to Vacon Ltd VS, Finland is found to comply with DNV GL rules for classification Ships, offshore
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: K-6282 File No: 334. Job Id: 262.1-019560-1 This is to certify: That the Structural Cementitious Grout with type designation(s) MasterFlow 9500 Issued to BASF
More informationApproval Engineer: Nina Thorvaldsen Moberg Inger-Helene Hals Head of Section
Certificate No: S-8431 File No: 911.53 Job Id: 262.1-018623-1 This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) 50T to 320T Bow Shackle
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000B1 This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) GATES hoses with DICSA
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000YK This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) Flexor1ST,1A,1SN,1AT
More informationSockets. terminations
Sockets Wire rope terminations Introduction With a dedicated team of professionals, a state-of-the-art production facility and global distribution, Ropeblock is the leading supplier for the lifting and
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAE000010D This is to certify: That the Frequency Converter with type designation(s) ACS800LC Issued to ABB Oy, Drives, is found to comply with DNV GL rules for
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: P-15161 File No: 791.70 Job Id: 262.1-008998-2 This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAA000014K Revision No: 1 This is to certify: That the Peripheral Equipment with type designation(s) JUMO AQUIS touch P (202580), JUMO DICON touch (703571) Issued to JUMO GmbH & Co. KG
More information>VLBG< Load Ring for bolting
RUD-Art.-Nr.: 8500972-EN / 03.013 Load Ring for bolting >< EN Safety instructions This safety instruction/declaration of the manufacturer has to be kept on file for the whole lifetime of the product. Translation
More informationGunnebo Lifting Shackles Product Catalog
Gunnebo Lifting Shackles Product Catalog Manufacturing: All Gunnebo Lifting Shackles are produced in ISO 9001 Certified manufacturing plants. Steel Grades for Gunnebo Lifting Shackles: Grade 6 ISO Grade
More informationFEUBO Catalogue 2016
FEUBO Catalogue 2016 Contents C-Links: C-Type Connector 4 Marc 5 Pear Link 6 Chasing Equipment: Grapnel 7 J-Chaser 8 Labyrinth Wire Rope Grapnel 9 Permanent Chaser 10 Roller Chaser 11 Hooks: KS Hook 12
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-13902 File No: 823.60 Job Id: 262.1-003417-8 This is to certify: That the Motor Starter with type designation(s) GV2-ME, GV2-P and GV2-L Issued to Schneider
More informationDLH ONLINE A GUIDE TO STANDARD EYE BOLTS, LIFTING POINTS AND HOIST RINGS FOR LIFTING PURPOSES. Benefits
DLH ONLINE A GUIDE TO STANDARD EYE BOLTS, LIFTING POINTS AND HOIST RINGS FOR LIFTING PURPOSES Benefits Safe use Types Applications Manufacturers Contact: Tel: 0845 270 2919 - INT: 00 44 161 223 1990 -
More informationEngineer The Lift!! HOIST RINGS. Applied Load Changes With Sling Angle. Sample Calculation: DO S DON TS
H&O DIE SUPPLY, INC. 1-800-222-5441 sales@hodie.com HOIST RINGS 10 Adjustable Alloy Chain Sling... 10.16 Center Pull Style... 10.4-10.5 Envirolox Protective Finish... 10.11 Eye Bolts... 10.15 Eye Nuts...
More informationGrade 80 Chain Sling Components. Grade 100 Chain Sling Components
NGER: Overhead lifting presents a very real danger of severe injury or loss of life if lifting equipment is not used properly.lease read and understand all of these instructions prior to using any lifting
More informationDIN , DIN
TransportTransportundund Hebegeräte Hebegeräte Chain slings HIT PRO chain system grade 1... 152 HIT PRO grade 1 Advantages... 153 HIT PRO grade 1 Nominal ratings at one glance... 155 Chain slings HIT PRO
More informationLIFTING AND LASHING POINT COLLECTION for bolting, for welding, simply strong
LIFTING AND LASHING POINT COLLECTION for bolting, for welding, simply strong Edition 18 RUD means Quality.for more than 130 years! The passion of chain manufacturing! The round steel chain link production
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-14027 File No: 822.21 Job Id: 262.1-010767-3 This is to certify: That the Frequency Converter with type designation(s) NXA, NXB, NXI, NXN & NXP Issued to Vacon
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000RH Revision No: 1 This is to certify: That the Ball Valve with type designation(s) BKH, BKHP, MKHP, KH-ISO, KHSAE Issued to MHA ZENTGRAF GmbH & Co. KG
More informationApproved for use as fixed fire extinguishing system for machinery spaces and cargo pump rooms.
Certificate No: TAF00000D7 This is to certify: That the Waterbased Fixed Fire Extinguishing System with type designation(s) VID Fire-Kill K6 Pacific Fine Water Spray (ceiling), VID Fire-Kill K6 North Sea
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000HM This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) G1, G2, M3K, M4K, M5K,
More informationHEAVY DUTY ROAD PLATE HOIST RING
HEAVY DUTY ROAD PLATE HOIST RING Association of Crane & Rigging Professionals is ready and able to serve you with other quality products. FAST-LOK TM PLATE LIFTING SYSTEM HEAVY DUTY SAFETY LIFT EYE LUG-LOK
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) 2SN, 4SP, 4SH Issued to TEKNO HOSE
More informationbut this affects the load rating - please ask for more information. Please refer to our technical information pages when specifying and/or using.
Double Swivel Shackle Nuts female Lifting Bolts & Shackles 4010 Material High tensile steel, strength class >8. Supplied with CE certificate. Technical notes Designed to be used directly with the hook
More informationPractice Note on the Sourcing of Threaded Rod Used for Foundation Bolts
MATERIALS Practice Note on the Sourcing of Threaded Rod Used for Foundation Bolts Authors: Kevin Cowie, Alistair Fussell Affiliation: Steel Construction New Zealand Inc. Date: 20 th February 2018 Ref.:
More informationTiger Lifting Home of the Tiger hoisting range & Tiger subsea lifting products
Tiger SS11 Subsea Lever Hoist with overload protection with overload protection with clevis adaptor and shackle Main Features DNV GL Verification tested according to NORSOK R-002 Available with slipping
More informationLoad Ring for bolting >VLBG<
RUD-Art.-Nr.: 8500972-EN / 05.015 Load Ring for bolting >< EN Safety instructions This safety instruction/declaration of the manufacturer has to be kept on file for the whole lifetime of the product. Translation
More informationWhen buying Crosby you re buying more than product, you re buying Quality.
From a 2 ton capacity snatch to a 6000 metric ton capacity crane, McKissick can make a McKissick s major involvement in the block McKissick When buying Crosby you re buying more than product, you re buying
More informationMINING PRODUCTS FOR HOISTS & RIGGING. Manual Hoists. Chain & Rigging Attachments. Specialized Attachments. Liner Bolts. for THE MINING INDUSTRY
A Complete Line of Products & Solutions for THE MINING INDUSTRY HOISTS & RIGGING PRODUCTS FOR MINING Manual Hoists Chain & Rigging Attachments Specialized Attachments Liner Bolts Columbus McKinnon Family
More informationov-lifting_bolts_divider - Updated Lifting Bolts
ov-lifting_bolts_divider - Updated - 09-01-2017 Lifting Bolts Technical Information roduct information Lifting Bolts roduct marking Compliant with 2006/42/EC, and with individual date of manufacture and
More informationRatcheting Pullers Reversible Puller Combination Pullers Slide Hammer Pullers Heavy Duty C-Clamps...
C L A M P I N G & P U L L I N G Ratcheting Pullers... 1137 Reversible Puller... 1139 Combination Pullers... 1139 Slide Hammer Pullers... 1139 Heavy Duty C-Clamps... 1141 General Service C-Clamps... 1142
More informationTiger Lifting Home of the Tiger hoisting, winching and height safety ranges
Tiger Professional Lever Hoist Model No. PROLH with optional travelling end stop with spark resistant components with overload protection Main Features DNV GL Verification tested according to NORSOK R-002
More information00000 Series Clevis Pin Slotted Hexagon Hex Key Recommended Corresponding Part No. Part No. Size Torque Preload SLT* SLT* HEX
00000 Series Clevis Pin All clevis pins are manufactured from heat treated 416 stainless steel to provide superior strength and wear. Hardness is between 37-40 Rc. The DCD Clevis Pin is a shouldered type
More information#908C. Weatherly Index #148. For Transportation and Industry Lifting / Cargo Control / Hardware / Winter Traction Products
#0C Weatherly Index #4 For Transportation and Industry Lifting / Cargo Control / Hardware / Winter Traction Products General Warnings & Information for SCC Products WARNING: The products in this catalog
More informationLifting / Spreader Beams
Lifting / Spreader Beams Contents 1 CERTEX NORWAY AS company information 2 2 Definitions 3 3 DNV GL Type Approved Lifting Beams 4 3.1 Multi Section Beams 5 3.2 Single Section Beams 6 3.3 Shackles 7 3.4
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAE000008C Revision No: 2 This is to certify: That the Frequency Converter with type designation(s) FC-302 series, Issued to Danfoss Drives A/S GRAASTEN, Denmark is found to comply with
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAE000008A Revision No: 2 This is to certify: That the Frequency Converter with type designation(s) FC102 series, Issued to Danfoss Drives A/S GRAASTEN, Denmark is found to comply with
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA000016D This is to certify: That the Governor Control System with type designation(s) PRIAMOS I/II/III for Multi-Engine Propulsion or Gen-Set Applications Issued
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP000005T Revision No: 1 This is to certify: That the Plate Heat Exchanger with type designation(s) See certificate Issued to Sondex A/S KOLDING, Denmark is found
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-12943 File No: 822.21 Job Id: 262.1-004066-3 This is to certify: That the Frequency Converter with type designation(s) FC30X series, Issued to Danfoss Drives
More informationAttachment Point type APAS
Eisenwarenfabrik und Hubert Gesenkschmiede GmbH & Co. Waltermann Original Instructions Attachment Point type APAS Grade 100 Read thoroughly before assembling and using This instruction should be made available
More informationSHANK HOOKS SPECIALTY HOOKS & RIGGING PRODUCTS
SHANK HOOKS SPECIALTY HOOKS & RIGGING PRODUCTS CO O LL U UM MB BU U SS C M cc KK II NN NN OO NN CC OO RR PP OO RR AA TT II OO NN M Columbus McKinnon has provided quality material handling products and
More informationLifting Devices Hoist Rings - Eye Bolts
Lifting Devices Hoist Rings - Eye Bolts Snap Rings - Hoist Rings Hoist Ring Accessories HOIST RING CLIPS Pg K3 SIDE LOAD HOIST RINGS Pg K5 CLIP RETAINERS Pg K6 SWIVEL HOIST RINGS Pg K2 FORGED SWIVEL HOIST
More informationIndex. The Benefits of Experience 2. Design and Manufacture 3. Quality 3. Slides and Hooks 4-7. Gambrels & S Hooks 8. Beef Rollers 9.
Index The Benefits of Experience 2 Design and Manufacture 3 Quality 3 Slides and s 4-7 Gambrels & S s 8 Beef Rollers 9 Bleeders 10 Other Components 11-12 Notes on 13 Page 1 The Benefits of Experience.
More informationSUITABLE FOR EXAMPLES OF USE APPROVALS. Type approval Deutsche Bahn. Requirements. AD 2000 Data sheet A2 DIN EN ISO PED 2014/68/EU
Type test approved atmospheric discharge safety valves for industrial applications Series 8 4.2 8 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and
More informationWire rope accessories. 5. Wire rope accessories. Index
Wire rope accessories 5. Wire rope accessories 1 General 1.1 About Hendrik Veder Group 1.2 Trade names 1.3 Certified Quality 1.4 Certificates 1.5 Key suppliers & brands 1.6 Contact information 1.7 Locations
More informationJOHNSON SNATCH BLOCKS BLOCKS FOR CONSTRUCTION, OILFIELD, AND TOWING
JOHNSON SNATCH BLOCKS BLOCKS FOR CONSTRUCTION, OILFIELD, AND TOWING Single Johnson Snatch Blocks 2 30 METRIC TONS WLL SINGLE SHEAVE W/SHACKLE SINGLE SHEAVE W/HOOK & OPTIONAL LATCH SINGLE SHEAVE TAILBOARD
More informationLOAD RATED FITTINGS STAINLESS STEEL LOAD RATED COMPONENTS HEIGHT SAFETY FITTINGS
LOAD RATED GRADE 316 STAINLESS STEEL FITTINGS STAINLESS STEEL LOAD RATED COMPONENTS HEIGHT SAFETY FITTINGS 37 Taree Street Burleigh QLD 4220 Telephone: (07) 55 935 688 Fax: (07 55 935 872 Email: bridge@bridco.com.au
More informationSUITABLE FOR EXAMPLES OF USE APPROVALS. TS EC type examination. Requirements AD 2000 Data sheet A2 DIN EN ISO PED 2014/68/EU
Type test approved atmospheric discharge safety valves for industrial applications Series 412 4.3 412 Safety valves made of stainless steel, atmospheric discharge, with threaded connections SUITABLE FOR
More informationSUITABLE FOR EXAMPLES OF USE APPROVALS. Type approval Deutsche Bahn. Requirements AD 2000 Data sheet A2 DIN EN ISO PED 2014/68/EU
Type test approved atmospheric discharge safety valves for industrial applications Series 812 4.4 812 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases
More informationMATERIALS HANDLING TECHNICAL MANUAL VOL. 2
5 Beaver maintains a comprehensive range of rigging hardware items for the most rigorous working environment. Comprising of turnbuckles in all configurations, collared Eyebolts and eye nuts, chain split
More informationSwing blocks for wire rope
EC Swing blocks for wire rope T 6055 GB 1 June 05 1/2 Applications The swing blocks of EC type are mainly used for temporary applications for lifting or pulling. They can be su spended to a fi xed or mobi
More informationSwivel Lifting Rings - Double Swivel - Female metric - course and UNC
Swivel Lifting Rings Double Swivel Female metric course and UNC 63084 Material High tensile steel, strength class >8. Supplied with CE certificate. Order No. Max. load tons (lbs) d 1 tol. 6g (tol. 2A)
More informationEC-TYPE EXAMINATION CERTIFICATE (MODULE B)
EC-TYPE EXAMINATION CERTIFICATE (MODULE B) Certificate No: MEDB000025U Revision No: 1 Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED), issued as "Forskrift om Skipsutstyr"
More informationMORDEC Anchor Chain & Fittings
MORD Anchor hain & Fittings MORD ANHOR HAIN & FITTINGS MORD Next Generation hain Solution The proportion and configurations of our present day stud link chain systems was adopted by Lloyds in 18, after
More informationTiger Lifting Home of the Tiger hoisting, winching and height safety ranges
Tiger Subsea Lever Hoist Model No. SS11 Unique torsion brake with clevis adaptor and shackle Main Features Suitable for use in multi-immersion applications DNV GL Verification tested according to NORSOK
More informationov-lifting_bolts_divider - Updated Lifting Bolts
ov-lifting_bolts_divider - Updated - 09-01-2017 Lifting Bolts Technical Information roduct information Lifting Bolts roduct marking Compliant with 2006/42/EC, and with individual date of manufacture and
More informationEstil high quality Bow Shackles and Straight Shackles Series GP EN 13889
Estil D-Shackles and Bow shackles, Green Pin, Yellow Pin, Black Pin Eye bolts DIN 580 and Eye nuts DIN 582 for lifting Estil Turnbuckle Lashing Wrenches Estil Welding eyes for lifting Estil chain and hooks
More informationLIF TING SOLUTIONS. Lifting Solutions
Center Pull Style... 484-485 Envirolox Protective Finish... 494 Eye Bolts...500 Eye Nuts... 499 Forged Center Pull...487 488 Forged Center Pull Stainless Steel...486 Kwik-Lok Lifting Pin...495 496 Hold
More informationPolyester Lifting Slings
Est. 969 Polyester Lifting Slings FASTLIFT Endless Roundsling (ERS) Roundslings with seamless single cover and protected label WLL Colour Weight Rec. min Rec. min Standard size range available (tonnes)
More informationSockets. terminations
Sockets Wire rope terminations Introduction With a dedicated team of professionals, a state-of-the-art production facility and global distribution, Ropeblock is the leading supplier for the lifting and
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationDET NORSKE VERITAS TYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. D-3744 This Certificate consists of 4 pages. This is to certify that the Marine Riser Equipment with type designation(s) Manual Running Tool
More informationHook & Eye Turnbuckles
Hook & Eye Turnbuckles HG-225 Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckles sizes 1/4 through 1, a shackle one size
More informationOperating Instructions Hoist Chains EN 818-7
Operating Instructions Hoist Chains EN 818-7 THIELE GmbH & Co. KG Werkstraße 3 Phone: +49 (0) 2371 / 947-0 58640 Iserlohn www.thiele.de B08285-B Page 1 EN-170114 Table of Contents 1 Introduction... 2 2
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationCompany Profile. Our parent Company. KWS A member of the THIELE-Group
G r a d e 8 0 GK8 by THIELE Company Profile Our parent Company The company was founded in 1935 by August Thiele. Chains were even welded in forge with only 8 employees. Later on automatic bending and welding
More informationM.K.Forge ISO 9001:2008 CERTIFIED. Specialist in: transmission stringing line, lifting tackles and all types of Forging
M.K.Forge ISO 9001:2008 CERTIFIED Specialist in: transmission stringing line, lifting tackles and all types of Forging Company Profile Mr late Shri Mukarab Khilji was the founder of M. K. Forge in the
More informationSwivel Lifting Rings - Double Swivel - Male metric - coarse and UNC
Swivel Lifting Rings Double Swivel Male metric coarse and UNC 63050 Order No. Max. load tons (lbs) d 1 tol. 6H (tol. 2B) l w 1 h 1 h 2 h 3 h 4 h 5 d 2 w 2 a/f 1 a/f 2 Sa fet Torque y to Nm fac (ft lbs)
More informationFIXED DISTANCE MARKS "Y" FOR DEFORMATION INDICATION (MM) DIN HOOK NO.
FORGED HOOKS Miller hooks are produced in accordance with the following DIN standards: DIN 15400- Lifting hooks, materials, mechanical properties, lifting capacity, stresses DIN 15401- Single hooks DIN
More informationThe all-inclusive chain sling system for coupling, shortening and lifting in grade 10
GrabiQ components The all-inclusive chain sling system for coupling, shortening and lifting in grade 10 Our GrabiQ sling system is designed to improve and make your lifting as quick and easy as possible.
More informationTYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. S-6397 Holder of Certificate BREVINI POWER TRANSMISSION S.p.A. REGGIO EMILIA RE, Italy This is to certify that the Gears with type designation(s)
More informationGeneral Technical Approval
General Technical Approval German approval body for construction products and types of construction Construction Testing Authority Authority of the German Länder Governments for a uniform fulfilment of
More informationTiger Lifting Home of the Tiger hoisting range & Tiger subsea lifting products
Tiger Lever Hoist Model No PROLH (with overload protection) Main Features Now available with slipping clutch overload protection Range 750kg - 10.0t Equipped with our unique dual brake mechanism New twin
More informationQuality, Safety and Environment
Quality, Safety and Environment Global Valve Center B.V. is an independent, internationally operating, modern, flexible and service-oriented organization with over forty years of experience and expertise
More informationPRODUCT INFORMATION SKINTOP ST-M
High oil-resistance for maximum reliability Permanent vibration protection Wide, variable clamping ranges Optimum strain relief Various accessories (e.g. multiple sealing inserts) Good chemical resistance
More informationGK8. G r a d e 8 0 by THIELE. The Name for Safety.
G r a d e 8 0 The Name Company Profile Our parent Company THIELE is an innovative manufacturer with a long tradition in the production of round steel chains and forged parts for the Conveying and Lifting
More informationTiger Lifting Home of the Tiger hoisting, winching and height safety ranges
Tiger Corrosion Resistant Chain Block Model No. SS12 with clevis adaptor and shackle Spark resistant option Main Features Suitable for use in multi-immersion applications DNV GL Verification tested according
More informationLIFTING AND LASHING POINT COLLECTION
LIFTING AND LASHING POINT COLLECTION for bolting, for welding, simply strong Edition 20 RUD means Quality since almost 140 years! The passion of chain manufacturing! The round steel chain link production
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP000018Z Revision No: 1 This is to certify: That the Ballast Water Management System with type designation(s) PureBallast 3.2, PureBallast 3.2 Compact Flex Issued
More informationProduct features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
More informationSockets. terminations
Sockets Wire rope terminations Mission Introduction With a dedicated team of professionals, a state-of-the-art production facility and global distribution, Ropeblock is the leading supplier for the lifting
More informationP.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
More informationLOAD RATED FITTINGS STAINLESS STEEL LOAD RATED COMPONENTS HEIGHT SAFETY FITTINGS
LOAD RATED GRADE 316 STAINLESS STEEL FITTINGS STAINLESS STEEL LOAD RATED COMPONENTS HEIGHT SAFETY FITTINGS 37 Taree Street Burleigh QLD 4220 Telephone: (07) 55 935 688 Fax: (07 55 935 872 Email: bridge@bridco.com.au
More informationSKINTOP ST-M, increased oil-resistant plastic cable gland with variable clamping ranges, permanent vibration protection, for offshore platforms
PRODUCT INFORMATION, increased oil-resistant plastic cable gland with variable clamping ranges, permanent vibration protection, for offshore platforms Info Now with IP69 approval! Proven to withstand the
More information