Approval Engineer: Nina Thorvaldsen Moberg Inger-Helene Hals Head of Section
|
|
|
- Oliver Porter
- 6 years ago
- Views:
Transcription
1 Certificate No: S-8431 File No: Job Id: This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) 50T to 320T Bow Shackle 63T to 100T Dee Shackle Issued to GN Rope Fittings - Grofsmederij Nieuwkoop B.V. NIEUWKOOP, Netherlands is found to comply with ABNT NBR Lifting purposes-shackle DNV Standard for Certification No Portable Offshore Units (2011) Application : Grade 6, 8, 8S and R4, Group G and H This Certificate is valid until Issued at Høvik on DNV GL local station: Rotterdam for DNV GL Approval Engineer: Nina Thorvaldsen Moberg Inger-Helene Hals Head of Section This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Approval Certificate and not to the approval of equipment/systems installed. Form code: TA 1411a Revision: Page 1 of 5 DNV GL DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
2 Product description 50T to 320T Bow Shackles are manufactured to Grade 6, 8, 8S or R4 strength, 63T to 100T Dee Shackles are manufactured to Grade 8 strength. Shackles is approved for use in Lifting Sets for Portable Offshore Units certified to DNV Standard for Certification No Portable Offshore Units. Dimensions of shackles are in compliance with ABNT NBR Detailed product information and range of certified products covered by this Approval are listed in Appendix 1 of this Approval Certificate. Application/Limitation Prior to selection of shackles the minimum required shackle working load limit () shall be decided according to the strength requirements for lifting sets on portable offshore units as given in DNV 2.7-3, Chapter Resulting sling force (RSF) can be found in the Design Verification Report (DVR) issued by DNV GL for the Portable Offshore Unit. The DVR shall be available for the shackle manufacturer. Shackle bolts shall be secured to prevent unwanted opening of the shackle. If shackle can experience significant out-of-plane loading, then shackle shall be de-rated in accordance with DNV 2.7-3, Chapter Tests to be carried out: - Production testing: According to ABNT NBR "Lifting purposes -Shackles in agreement with the DNV surveyor. - Material to be impact tested by Charpy impact method according to DNV 2.7-3, Chapter 7.4 or ABNT NBR 13545, whichever is strickter. The manufacturer shall issue product certificates in accordance with DNV 2.7-3, Chapter using the certificate form LET This certificate form is only to be used for shackles certified according to this approval Certificate. Approval documentation Drawing No. Rev. Title LET Manufacturer Certificate form AQ-NLD-RvA 2 Quality Management System Certificate by DNV ABNT NBR BX - 50 (page 1 of 4) 00 ABNT NBR BX 50 ABNT NBR BX - 55 (page 1 of 4) 00 ABNT NBR BX - 55 ABNT NBR BX - 63 (page 1 of 4) 00 ABNT NBR BX - 63 ABNT NBR BX - 80 (page 1 of 4) 00 ABNT NBR BX - 80 ABNT NBR BX - 85 (page 1 of 4) 00 ABNT NBR BX - 85 ABNT NBR BX - 63 (page 1 of 4) 00 ABNT NBR BX - 63 ABNT NBR BX - 80 (page 1 of 4) 00 ABNT NBR BX - 80 ABNT NBR BX - 85 (page 1 of 4) 00 ABNT NBR BX - 85 ABNT NBR BX (page 1 of 4) 00 ABNT NBR BX ABNT NBR BX (page 1 of 4) 00 ABNT NBR BX ABNT NBR BX (page 1 of 4) 00 ABNT NBR BX ABNT NBR BX (page 1 of 4) 00 ABNT NBR BX ABNT NBR BX (page 1 of 4) 00 ABNT NBR BX ABNT NBR BX (page 1 of 4) 00 ABNT NBR BX ABNT NBR S - BX - 80 (page 1 of 4) 00 ABNT NBR S - BX - 80 ABNT NBR S - BX - 85 (page 1 og 4) 00 ABNT NBR S - BX - 85 ABNT NBR S - BX (page 1 of 4) 00 ABNT NBR S - BX ABNT NBR S - BX (page 1 of 4) 00 ABNT NBR S - BX Form code: TA 1411a Revision: Page 2 of 5
3 ABNT NBR S - BX (page 1 of 4) 00 ABNT NBR S - BX ABNT NBR S - BX (page 1 of 4) 00 ABNT NBR S - BX ABNT NBR S - BX (page 1 of 4) 00 ABNT NBR S - BX ABNT NBR S - BX (page 1 of 4) 00 ABNT NBR S - BX ABNT NBR S - BX (page 1 of 4) 00 ABNT NBR S - BX ABNT NBR S - BX (page 1 of 4) 00 ABNT NBR S - BX ABNT NBR S - BX (page 1 of 4) 00 ABNT NBR S - BX ABNT NBR S - BX (page 1 of 4) 00 ABNT NBR S - BX ABNT NBR R4 - BX - 80 (page 1 of 4) 00 ABNT NBR R4 - BX - 80 ABNT NBR R4 - BX - 85 (page 1 of 4) 00 ABNT NBR R4 - BX - 85 ABNT NBR R4 - BX (page 1 of 4) 00 ABNT NBR R4 - BX ABNT NBR R4 - BX (page 1 of 4) 00 ABNT NBR R4 - BX ABNT NBR R4 - BX (page 1 of 4) 00 ABNT NBR R4 - BX ABNT NBR R4 - BX (page 1 of 4) 00 ABNT NBR R4 - BX ABNT NBR R4 - BX (page 1 of 4) 00 ABNT NBR R4 - BX ABNT NBR R4 - BX (page 1 of 4) 00 ABNT NBR R4 - BX ABNT NBR R4 - BX (page 1 of 4) 00 ABNT NBR R4 - BX ABNT NBR R4 - BX (page 1 of 4) 00 ABNT NBR R4 - BX ABNT NBR R4 - BX (page 1 of 4) 00 ABNT NBR R4 - BX ABNT NBR R4 - BX (page 1 of 4) 00 ABNT NBR R4 - BX ABNT NBR DX - 63 (page 1 of 4) 00 ABNT NBR DX - 63 ABNT NBR DX - 80 (page 1 of 4) 00 ABNT NBR DX - 80 ABNT NBR DX (page 1 of 4) 00 ABNT NBR DX Initial Approval Assesment Report endorsed by DNV GL Rotterdam dated Test report No. A T (22 pages) endorsed by DNV GL Rotterdam dated Test report No. A T (26 pages) endorsed by DNV GL Rotterdam dated Test report No. A T (22 pages) endorsed by DNV GL Rotterdam dated Test report No. A T (22 pages) endorsed by DNV GL Rotterdam dated Test report No. A T (23 pages) endorsed by DNV GL Rotterdam dated Test report No. A T (22 pages) endorsed by DNV GL Rotterdam dated Test report No. A T (23 pages) endorsed by DNV GL Rotterdam dated Tests carried out Prototype strength and fatuige tested according to ABNT NBR "Lifting purposes -Shackles Marking of product Each item to be marked according to DNV 2.7-3, Chapter 7.6. Periodical assessment In order to maintain the validity of this type approval certificate, retention surveys are to be carried out according to DNV Intervals are not to exceed 6 months For retention of the Approval, a DNV GL surveyor shall perform a survey every 6 months and before the expiry date of this certificate to verify that the type approval is complied with. END OF CERTIFICATE Form code: TA 1411a Revision: Page 3 of 5
4 Appendix 1 Product description and details Bow Shackle, Grade 6 ABNT NBR BX ABNT NBR BX ABNT NBR BX ABNT NBR BX ABNT NBR BX Bow Shackle, Grade 8 ABNT NBR BX ABNT NBR BX ABNT NBR BX ABNT NBR BX ABNT NBR BX ABNT NBR BX ABNT NBR BX ABNT NBR BX ABNT NBR BX Bow Shackle, Grade 8S ABNT NBR S-BX ABNT NBR S-BX ABNT NBR S-BX ABNT NBR S-BX ABNT NBR S-BX ABNT NBR S-BX ABNT NBR S-BX ABNT NBR S-BX ABNT NBR S-BX ABNT NBR S-BX ABNT NBR S-BX ABNT NBR S-BX Bow Shackle, Grade R4 ABNT NBR R4-BX ABNT NBR R4-BX ABNT NBR R4-BX ABNT NBR R4-BX ABNT NBR R4-BX ABNT NBR R4-BX ABNT NBR R4-BX ABNT NBR R4-BX ABNT NBR R4-BX ABNT NBR R4-BX ABNT NBR R4-BX ABNT NBR R4-BX Form code: TA 1411a Revision: Page 4 of 5
5 Dee Shackle, Grade 6 ABNT NBR DX ABNT NBR DX ABNT NBR DX Form code: TA 1411a Revision: Page 5 of 5
This is to certify: Application : Certificate No: TAS000011V Revision No: 1. That the Lifting set for Offshore containers and Portable Offshore Units
Certificate No: TAS000011V Revision No: 1 This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) Green Pin Standard and Green Pin Polar shackles
This is to certify: Application : Certificate No: TAS000011V. That the Lifting set for Offshore containers and Portable Offshore Units
Certificate No: TAS000011V This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) Green Pin Standard and Green Pin Polar shackles Issued to
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAS00000K9 This is to certify: That the Chain, shackles, swivels, sockets with type designation(s) Wide Body Shackles Issued to Crosby Group LLC Tulsa OK, United
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: A-14136 File No: 899.60 Job Id: 262.1-018818-1 This is to certify: That the Peripheral Equipment with type designation(s) Ha-VIS econ 2000 series, econ 3000 series
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-13902 File No: 823.60 Job Id: 262.1-003417-8 This is to certify: That the Motor Starter with type designation(s) GV2-ME, GV2-P and GV2-L Issued to Schneider
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: P-15161 File No: 791.70 Job Id: 262.1-008998-2 This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K7 Revision No: 1 This is to certify: That the Safety Valve with type designation(s) Safety valves with bellow seal, Types: 06800, 06801, 06805, 06806
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K3 Revision No: 1 This is to certify: That the Check Valve with type designation(s) 05414, 05417, 05419, 05714, 05717, 05719 Issued to Herose GmbH Armaturen
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) 2SN, 4SP, 4SH Issued to TEKNO HOSE
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAE000010D This is to certify: That the Frequency Converter with type designation(s) ACS800LC Issued to ABB Oy, Drives, is found to comply with DNV GL rules for
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: K-6282 File No: 334. Job Id: 262.1-019560-1 This is to certify: That the Structural Cementitious Grout with type designation(s) MasterFlow 9500 Issued to BASF
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-14027 File No: 822.21 Job Id: 262.1-010767-3 This is to certify: That the Frequency Converter with type designation(s) NXA, NXB, NXI, NXN & NXP Issued to Vacon
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000B1 This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) GATES hoses with DICSA
Approved for use as fixed fire extinguishing system for machinery spaces and cargo pump rooms.
Certificate No: TAF00000D7 This is to certify: That the Waterbased Fixed Fire Extinguishing System with type designation(s) VID Fire-Kill K6 Pacific Fine Water Spray (ceiling), VID Fire-Kill K6 North Sea
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. D-3744 This Certificate consists of 4 pages. This is to certify that the Marine Riser Equipment with type designation(s) Manual Running Tool
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-12943 File No: 822.21 Job Id: 262.1-004066-3 This is to certify: That the Frequency Converter with type designation(s) FC30X series, Issued to Danfoss Drives
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000YK This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) Flexor1ST,1A,1SN,1AT
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000RH Revision No: 1 This is to certify: That the Ball Valve with type designation(s) BKH, BKHP, MKHP, KH-ISO, KHSAE Issued to MHA ZENTGRAF GmbH & Co. KG
is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TE00001J9 This is to certify: That the Frequency Converter with type designation(s) NXS Issued to Vacon Ltd VS, Finland is found to comply with DNV GL rules for classification Ships, offshore
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP000005T Revision No: 1 This is to certify: That the Plate Heat Exchanger with type designation(s) See certificate Issued to Sondex A/S KOLDING, Denmark is found
is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAE000008A Revision No: 2 This is to certify: That the Frequency Converter with type designation(s) FC102 series, Issued to Danfoss Drives A/S GRAASTEN, Denmark is found to comply with
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA000016D This is to certify: That the Governor Control System with type designation(s) PRIAMOS I/II/III for Multi-Engine Propulsion or Gen-Set Applications Issued
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000HM This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) G1, G2, M3K, M4K, M5K,
is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAE000008C Revision No: 2 This is to certify: That the Frequency Converter with type designation(s) FC-302 series, Issued to Danfoss Drives A/S GRAASTEN, Denmark is found to comply with
This is to certify: Application : Certificate No: TAA00000FJ. That the Miscellaneous. with type designation(s) K-Bridge and K-Nav system platforms
Certificate : TAA00000FJ This is to certify: That the Miscellaneous with type designation(s) K-Bridge and K-Nav system platforms Issued to Kongsberg Maritime AS KONGSBERG, rway is found to comply with
is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAA000014K Revision No: 1 This is to certify: That the Peripheral Equipment with type designation(s) JUMO AQUIS touch P (202580), JUMO DICON touch (703571) Issued to JUMO GmbH & Co. KG
EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE
EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE Certificate No: MRA0000017 This Certificate is issued to ABB Automation Products GmbH Heidelberg, Germany for Computers and Programmable Logic Controllers
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP000018Z Revision No: 1 This is to certify: That the Ballast Water Management System with type designation(s) PureBallast 3.2, PureBallast 3.2 Compact Flex Issued
DOCK AND SHIP TO SHIP HOSE
DOCK AND SHIP TO SHIP ALFAGOMMA // APPLICATIONS 2 www.alfagomma.com ALFAGOMMA // CERTIFICATE // ALFAGOMMA DOCK AND SHIP TO SHIP RANGE ALFAGOMMA has developed a range of dock and ship to ship hoses to meet
Yellow Point WARNING NEVER EXCEED PUBLISHED WORKING LOAD LIMIT. Catalog No YP. Copyright 2017 YOKE Industrial Corp. All Rights Reserved.
Yellow Point Catalog No. 8-2017.YP 2 3 Yellow Point 4 Worldwide Quality Type Approval And Certificate: 5 Quality Control, Testing, and Detecting during manufacturing YOKE runs a constant and strict production
TYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. P-13583 This is to certify that the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) Alfagomma:
TYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. S-6397 Holder of Certificate BREVINI POWER TRANSMISSION S.p.A. REGGIO EMILIA RE, Italy This is to certify that the Gears with type designation(s)
EC-TYPE EXAMINATION CERTIFICATE (MODULE B)
EC-TYPE EXAMINATION CERTIFICATE (MODULE B) Certificate No: MEDB000025U Revision No: 1 Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED), issued as "Forskrift om Skipsutstyr"
DNVGL-CP-0110 Edition March 2016
CLASS PROGRAMME Type approval DNVGL-CP-0110 Edition March 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
Sockets. terminations
Sockets Wire rope terminations Introduction With a dedicated team of professionals, a state-of-the-art production facility and global distribution, Ropeblock is the leading supplier for the lifting and
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE
Page 1 of 5 DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-9389 This Certificate consists of 5 pages This is to certify that the Motor Starter 823.60 with type designation(s) Altistart
TYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-13344 This is to certify that the Terminal Block with type designation(s) MBKKB, MT, MTTB, UK, UKKB, ZFK;MBK, UHSK, UKH, UK, PIK, UKKB, UKK,
Lifting / Spreader Beams
Lifting / Spreader Beams Contents 1 CERTEX NORWAY AS company information 2 2 Definitions 3 3 DNV GL Type Approved Lifting Beams 4 3.1 Multi Section Beams 5 3.2 Single Section Beams 6 3.3 Shackles 7 3.4
Report No.: Name of Ship: Plans referred during Initial Survey:
Report on the Surveys Concerning International Oil Pollution Prevention Certificate Part 7 Survey of installation for discharges from cargo spaces Initial/ Annual/ Intermediate/ Renewal/ Change of Flag
INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE. GOVERNMENTOFmELAND
INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE No LDROIMMO/20150224110303 Issued under the provisions of the Protocol of 1997, as amended by resolution MEPC.176(58) in 2008, to amend the International
Ships in Operation Survey Requirements
Rules for Classification of Ships, July 2006 Pt.7 Ships in Operation Survey Requirements Issued 1. July 2006 This report contains DNV s overall interpretation of the consequences of the many new DNV rules
EU Mutual Recognition Technical Requirements
1. PRODUCT DESCRIPTION... 1 1.a General description of the product... 1 1.b Application limitations... 1 1.c Intended use... 2 1.d System context... 2 2. DESIGN EVALUATION... 2 2.a Engineering evaluation
ANNEX 8 RESOLUTION MEPC.102(48) Adopted on 11 October 2002 GUIDELINES FOR SURVEY AND CERTIFICATION OF ANTI-FOULING SYSTEMS ON SHIPS
RESOLUTION MEPC.102(48) Adopted on 11 October 2002 GUIDELINES FOR SURVEY AND CERTIFICATION OF ANTI-FOULING SYSTEMS ON SHIPS THE MARINE ENVIRONMENT PROTECTION COMMITTEE, RECALLING Article 38(a) of the Convention
ST. VINCENT AND THE GRENADINES
ST. VINCENT AND THE GRENADINES MARITIME ADMINISTRATION CIRCULAR N AFS 001 Rev.1 International Convention on the Control of Harmful Anti-fouling Systems on Ship Issuance of Statement of Compliance TO: APPLICABLE
Technical Information
Subject Equipment for the Singapore flag vessels To whom it may concern Technical Information No. TEC-1045 Date 28 August 2015 Regarding the requirement for equipment installed Singapore registered ships
ELECTRICAL INSTALLATIONS
RULES FOR CLASSIFICATION OF SHIPS / HIGH SPEED, LIGHT CRAFT AND NAVAL SURFACE CRAFT NEWBUILDINGS MACHINERY AND SYSTEMS MAIN CLASS PART 4 CHAPTER 8 ELECTRICAL INSTALLATIONS JANUARY 2007 CONTENTS PAGE Sec.
E/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1
30 August 2011 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for
INSTRUCTIONS FOR USE CAUTIONS AND WARNINGS
SECTION 3 General INSTRUCTIONS FOR USE CAUTIONS AND WARNINGS Commercial shackles are not to be used for lifting purposes. Should extreme circumstances or shock loadings be applicable, this must be taken
NO x FAQ. Disclaimer. Content
NO x FAQ Disclaimer This NO x FAQ is a guideline for customers of SBS Technology A/S. It is SBS Technology A/S s interpretation of the regulations mentioned in this text, not the legally binding text.
Plugs and Socket-Outlets in Brazil
Plugs and Socket-Outlets in Brazil Mandatory Certification Brazilian power cords Brazilian Certification Certification according to system n 05 of ISO/CASCO: Plant Evaluation Certification Type Tests Surveillance
Lloyd s Register Type Approval System Test Specification Number GT04
Lloyd s Register Type Approval System Test Specification Number GT04 Gas Turbines Performance and test specifications for Gas Turbines to be used in Marine, Offshore and Industrial Applications 2004 Lloyd's
RULES PUBLICATION NO. 4/P IC ENGINES AND ENGINE COMPONENTS SURVEY AND CERTIFICATION July
RULES PUBLICATION NO. 4/P IC ENGINES AND ENGINE COMPONENTS SURVEY AND CERTIFICATION 2017 July Publications P (Additional Rule Requirements) issued by Polski Rejestr Statków complete or extend the Rules
RESOLUTION MEPC.198(62) Adopted on 15 July GUIDELINES ADDRESSING ADDITIONAL ASPECTS TO THE NOx TECHNICAL CODE 2008 WITH REGARD TO
ANNEX 6 MEPC 62/24 Annex 6, page 1 2011 GUIDELINES ADDRESSING ADDITIONAL ASPECTS TO THE NO x TECHNICAL THE MARINE ENVIRONMENT PROTECTION COMMITTEE, RECALLING Article 38(a) of the Convention on the International
Ballast Water Management
Ballast Water Management TRANSPORTSTYRELSEN Sjöfartsseminarium 2017 Göteborg 8-9 Mars Klassen - Hur arbetar vi med implementeringen av barlastvattenkonventionen Martin Olofsson DNV GL Høvik, Norge 1 Ballast
SKINTOP ST-M, increased oil-resistant plastic cable gland with variable clamping ranges, permanent vibration protection, for offshore platforms
PRODUCT INFORMATION, increased oil-resistant plastic cable gland with variable clamping ranges, permanent vibration protection, for offshore platforms Info Now with IP69 approval! Proven to withstand the
Sockets. terminations
Sockets Wire rope terminations Mission Introduction With a dedicated team of professionals, a state-of-the-art production facility and global distribution, Ropeblock is the leading supplier for the lifting
TEST REPORT. Report No.: G Rendered to: SKYCO SKYLIGHTS Costa Mesa, California
TEST REPORT Report No.: G1418.01-301-44 Rendered to: SKYCO SKYLIGHTS Costa Mesa, California PRODUCT TYPE: Fall Protection Security Bars SERIES/MODEL: FSB-1A/FSB-10A/FSB-1/FSB-10 SPECIFICATION: Occupational
Three-phase motors for marine use
Three-phase motors for marine use Contents Product description 11/2 Overview of technical data 11/7 Series K.../W4.. for Premium Efficiency IE3 11/8 Series K.../WE.. for High Efficiency IE2 11/12 Series
ANNEX MOTOR VEHICLES AND EQUIPMENT AND PARTS THEREOF. Article 1. Definitions
ANNEX MOTOR VEHICLES AND EQUIPMENT AND PARTS THEREOF Article 1 Definitions 1. For the purpose of this Annex, the following definitions apply: (a) WP.29 means the World Forum for Harmonisation of Vehicle
ROTATING MACHINERY, GENERAL
RULES FOR CLASSIFICATION OF SHIPS / HIGH SPEED, LIGHT CRAFT AND NAVAL SURFACE CRAFT NEWBUILDINGS MACHINERY AND SYSTEMS MAIN CLASS PART 4 CHAPTER 2 ROTATING MACHINERY, GENERAL JANUARY 2011 CONTENTS PAGE
Test requirements for Rotating Machines
(1996) (Rev.1 May 2001) (Corr.1 May 2004) (Rev.2 Aug 2015) Test requirements for Rotating Machines 1. General All machines are to be tested by the manufacturer. Manufacturer s test records are to be provided
PRODUCT INFORMATION SKINTOP ST-M
High oil-resistance for maximum reliability Permanent vibration protection Wide, variable clamping ranges Optimum strain relief Various accessories (e.g. multiple sealing inserts) Good chemical resistance
CHAIN BLOCK AND WIRE SLINGS REGISTER
CHAIN BLOCK AND WIRE SLINGS REGISTER M/T Port of Registry International Call Sign Flag IMO Number THIS PLAN WILL NEED TO BE MADE AVAILABLE FOR INSPECTION ON OCCASIONS. Record of Revisions Revision / Date
AIR LUBRICATION SYSTEM INSTALLATION
Guide for Air Lubrication System Installation GUIDE FOR AIR LUBRICATION SYSTEM INSTALLATION OCTOBER 2018 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 2018
ANNEX 13. UNIFIED INTERPRETATIONS TO MARPOL ANNEX VI AND THE NO x TECHNICAL CODE
MARPOL Annex VI Regulation 1 Application Regulation 1 reads as follows: UNIFIED INTERPRETATIONS TO MARPOL ANNEX VI AND THE NO x TECHNICAL CODE The provisions of this Annex shall apply to all ships, except
OPTIC-4. Multimode GC Inlet. Installation Guide OPTIC-4 Inlet CO 2 Cooling Option.
OPTIC-4 Multimode GC Inlet Installation Guide OPTIC-4 Inlet CO 2 Cooling Option www.atasgl.com :D Disclaimer ATAS GL International B.V. makes no representations or warranties with respect to the contents
EU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL
This document contains an EU proposal for a legal text on an annex on motor vehicles and equipment and parts thereof to the Trade in Goods chapter in the Trade Part of a possible modernised EU-Mexico Association
Submittal Requirements for Product Evaluation - Doors
TEXAS DEPARTMENT OF INSURANCE Engineering Services / MC 103-3A 333 Guadalupe Street P.O. Box 149104 Austin, Texas 78714-9104 Phone No. (512) 322-2212 Fax No. (512) 463-6693 Submittal Requirements for Product
REPUBLIC OF THE MARSHALL ISLANDS
REPUBLIC OF THE MARSHALL ISLANDS MARITIME ADMINISTRATOR 11495 COMMERCE PARK DRIVE RESTON, VIRGINIA 20191-1506 TEL: +1-703-620-4880 FAX: +1-703-476-8522 Email: technical@register-iri.com TECHNICAL CIRCULAR
EC TYPE-EXAMINATION CERTIFICATE
DET NORSKE VERITAS EC TYPE-EXAMINATION CERTIFICATE Application of: Council Directive 96/98/EC of 20 December 1996 on Marine Equipment as amended by directive 2009/26/EC, issued as "Forskrift om Skipsutstyr"
Title: Lifting Operations Involving Crane or Gantry Offshore
PTW CHECKLIST - NO. 30 Title: Lifting Operations Involving Crane or Gantry Offshore Owner: Capability Coordinator Approver: Capability Coordinator Permit No.: Max Validity Period: 5 yrs Date: Latest Rev
DNV GL EGC system approval and experience
MARITIME DNV GL EGC system approval and experience SOxExhaust Gas Cleaning Systems (EGCs) Håkon B. Thoresen, Principal Approval Engineer INTERTANKO TANKER EVENT, NEW YORK, 09 MAY 2014 1 SAFER, SMARTER,
Dhatec Document No.: DHA415-APS-PH
Elskensakker 8, NL-5571 SK Bergeijk, The Netherlands Tel +31 497 542 527 Fax +31 497 555 399 Email info@dhatec.nl Web www.dhatec.nl Application Procedure Specification Dhatec Pipe Hook Dhatec Document
Subject SAFETY EQUIPMENT REPAIR ORDER. 29 August By Order of the Police Commissioner
Policy 904 Subject SAFETY EQUIPMENT REPAIR ORDER Date Published Page 29 August 2016 1 of 5 By Order of the Police Commissioner POLICY It is the policy of the Baltimore Police Department (BPD) to issue
TOPAS 2130A (Draft v3)
TOPAS 2130A (Draft v3) Revision Date Scope Authorised by A (v1) 10/10/17 Draft A (v2) 11/11/17 Draft A (v3) 15/12/17 Draft Traffic Open Products And Specifications Limited 2017. This document is the property
EC-TYPE EXAMINATION CERTIFICATE (MODULE B)
EC-TYPE EXAMINATION CERTIFICATE (MODULE B) Certificate No: MEDB000008G Revision No: 3 Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED), issued as "Forskrift om Skipsutstyr"
ECE/RCTE/CONF/4/Add.1/Rev.2
ECE/RCTE/CONF/4/Add.1/Rev.2 8 May 2018 Agreement Concerning the adoption of uniform conditions for periodical technical inspections of wheeled vehicles and the reciprocal recognition of such inspections
FORM 20 [See Rule 47] APPLICATION FOR REGISTRATION OF A MOTOR VEHICLE
![FORM 20 [See Rule 47] APPLICATION FOR REGISTRATION OF A MOTOR VEHICLE](/thumbs/76/73814465.jpg "FORM 20 [See Rule 47] APPLICATION FOR REGISTRATION OF A MOTOR VEHICLE")
FORM 20 [See Rule 47] APPLICATION FOR REGISTRATION OF A MOTOR VEHICLE (To be made in duplicate if the vehicle is held under an agreement of Hire-Purchase/Lease/Hypothecation and duplicate copy with the
PRODUCT INFORMATION SKINTOP ST-M
High oil-resistance for maximum reliability Permanent vibration protection Wide, variable clamping ranges Optimum strain relief Various accessories (e.g. multiple sealing inserts) Good chemical resistance
An Urgent Bulletin from CSA Group
An Urgent Bulletin from CSA Group Elevator Equipment No. 24 Effective Date: January 1, 2019 Date: May 3, 2018 Apply Before September 1, 2018 Announcing: Withdrawing of TIL CSA D-11B and Publication of
ELECTRICAL INSTALLATIONS
RULES FOR CLASSIFICATION OF SHIPS / HIGH SPEED, LIGHT CRAFT AND NAVAL SURFACE CRAFT NEWBUILDINGS MACHINERY AND SYSTEMS MAIN CLASS PART 4 CHAPTER 8 ELECTRICAL INSTALLATIONS JANUARY 2003 CONTENTS PAGE Sec.
TECHNICAL SPECIFICATIONS FOR STEEL PLATES
TECHNICAL SPECIFICATIONS FOR STEEL PLATES 1.0 SCOPE: HINDUSTAN PETROLEUM CORPORATION LTD., GRESHAM HOUSE This specification covers requirement for Carbon Steel Plates of Structural Quality as per IS: 2062
RULES PUBLICATION NO. 98/P
RULES PUBLICATION NO. 98/P GUIDELINES REGARDING THE REQUIREMENTS FOR MARINE DIESEL ENGINES FITTED WITH NO X SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEMS 2016 January Publications P (Additional Rule Requirements)
PROCEDURE. Operative Date: 22/12/2016 Department: HSEC. Revision: Author: D Steel CONTENTS
Title: Cranes - Inspection and Maintenance PROCEDURE Procedure No: P314.422 Issue: 1 Revision: 0 Operative Date: 22/12/2016 Department: HSEC Sect./Classification: Safety / Gear & Equipment Author: D Steel
#16-NA-338: PQC Assembly Replacement Process - Dealers Required to Contact PQC Prior to Replacing an Assembly - (Oct 7, 2016)
Page 1 of 8 Document ID: 4579188 #16-NA-338: PQC Assembly Replacement Process - Dealers Required to Contact PQC Prior to Replacing an Assembly - (Oct 7, 2016) Subject: PQC Assembly Replacement Process
ROV shackles. your reliable partner
ROV shackles your reliable partner Dear Customer, For over 90 years the production of high tensile shackles has been our core business and competence. The designs and quality standards of our wire rope-
2015 NIST EPO No. 12
2015 NIST EPO No. 12 Examination Procedure Outline for Part 1 Livestock and Animal Scales Electronic Digital Indicating Part 1 Electronic Digital Indicating...1 Part 2 Mechanical Analog Indicating...11
#16-NA-338: PQC Assembly Replacement Process - Dealers Required to Contact PQC Prior to Replacing an Assembly - (Oct 7, 2016)
Page 1 of 5 Document ID: 4579188 #16-NA-338: PQC Assembly Replacement Process - Dealers Required to Contact PQC Prior to Replacing an Assembly - (Oct 7, 2016) Subject: PQC Assembly Replacement Process
Regional Workshop on MARPOL Annex VI: Ship Energy Efficiency and Technology Transfer NOTE
Regional Workshop on MARPOL Annex VI: Ship Energy Efficiency and Technology Transfer Pre-Workshop Assignment Multiple Choice Questions NOTE Those who are going to take part in the workshop should read
SKINTOP ST-M, increased oil-resistant plastic cable gland with variable clamping ranges, permanent vibration protection, for offshore platforms
, increased oil-resistant plastic cable gland with variable clamping ranges, permanent vibration protection, for offshore platforms Info Now with IP69 approval! Proven to withstand the most demanding cleaning
5.0 REACTOR COOLANT SYSTEM AND CONNECTED SYSTEMS
Summary Description 5.0 REACTOR COOLANT SYSTEM AND CONNECTED SYSTEMS This chapter of the U.S. EPR Final Safety Analysis Report (FSAR) is incorporated by reference with supplements as identified in the
ST. VINCENT AND THE GRENADINES
ST. VINCENT AND THE GRENADINES MARITIME ADMINISTRATION CIRCULAR N POL 022 FUEL OIL CONSUMPTION DATA COLLECTION SYSTEM Amendments to MARPOL Annex VI, MEPC.278(70) TO: APPLICABLE TO: EFFECTIVE AS FROM: SHIPOWNERS,
Guideline No.: E-03(201806) E-03 MOTORS. Issued date: June 7, China Classification Society
Guideline No.: E-03(201806) E-03 MOTORS Issued date: June 7, 2018 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection and testing
SUBJECT: FUEL FITTING P/N AND , VERIFICATION OF.
ALERT SERVICE BULLETIN 212-18-159 13 September 2018 MODEL AFFECTED: 212 SUBJECT: FUEL FITTING P/N 50-040-1 AND 50-040-3, VERIFICATION OF. HELICOPTERS AFFECTED: Serial numbers 30502 through 30603, 30611
The Council Directive 2009/23/EC on non-automatic weighing instruments.
EC type-approval certificate Page 1 of 5 Issued by In accordance with Manufacturer In respect of Characteristics NMi Certin B.V. Hugo de Grootplein 1 3314 EG Dordrecht The Netherlands The Council Directive
MARINE DIESEL ENGINES
ABCD LR NOx EMISSIONS CERTIFICATION OF MARINE DIESEL ENGINES April 2010 Lloyd's Register, 71 Fenchurch Street, London EC3M 4BS, UK ABCD Lloyd s Register 71 Fenchurch Street London EC3M 4BS Telephone +44
Sockets. terminations
Sockets Wire rope terminations Introduction With a dedicated team of professionals, a state-of-the-art production facility and global distribution, Ropeblock is the leading supplier for the lifting and
TEST REPORT. Report No.: G Rendered to: VELUX America LLC Greenwood, South Carolina
TEST REPORT Report No.: G4212.01-109-44 Rendered to: VELUX America LLC Greenwood, South Carolina PRODUCT TYPE: Skylight with Curb SERIES/MODEL: Specials Dome Skylight 0.118 thickness PC smooth/0.118 thickness
SFI SPECIFICATION 15.4 EFFECTIVE: JULY 20, 2010 * PRODUCT: Top Fuel and Funny Car Drag Race Drive Beadlock Wheels
SFI SPECIFICATION 15.4 EFFECTIVE: JULY 20, 2010 * PRODUCT: Top Fuel and Funny Car Drag Race Drive Beadlock Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures
Ballast Water Convention
Ballast Water Convention January 2017 L-C&R / SCD Foreword - Invasive aquatic species / Ballast Water Invasive aquatic species are one of the greatest threats to the world s oceans, and can cause extremely