TYPE APPROVAL CERTIFICATE

Size: px
Start display at page:

Download "TYPE APPROVAL CERTIFICATE"

Transcription

1 DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E This is to certify that the Terminal Block with type designation(s) MBKKB, MT, MTTB, UK, UKKB, ZFK;MBK, UHSK, UKH, UK, PIK, UKKB, UKK, MTK, UDK, URTK; URELG, UVKB.;USLKG Issued to Phoenix Contact GmbH & Co. KG Blomberg, Germany is found to comply with Det Norske Veritas' Rules for Classification of Ships, High Speed & Light Craft and Det Norske Veritas' Offshore Standards Application Modular through terminal blocks. Protective ground terminal blocks. For use in Marine and Offshore Applications This Certificate is valid until Issued at Høvik on DNV local station: Essen CMC Western Germany for Det Norske Veritas AS Approval Engineer: Nicolay Horn Marit Laumann Head of Section This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed. If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf of Det Norske Veritas. Form No.: TA 1411a Issue: Page 1 of 5

2 Name & Place of Manufacturer Phoenix Contact GmbH & Co. KG Flachsmarktstr Blomberg Germany Phoenix Feinbau GmbH & Co. KG Gustavstr Lüdenscheid Germany Phoenix Contact India Pvt. Ltd Dhatir Road, Village-Dhudhola Prithla, Palwal, Faridabad Haryana India Phoenix Contact Wielkopolska Spolka z.o.o. Ul. Celna Nowy Tomysl Poland Eviop Tempo S.A. Leoforos Kymis Vasilikon Greece Phoenix Contact Asia-Pacific (Nanjing) Co. Ltd. 36 Phoenix Road Jiangning Nanjing Nanjing Peoples Republic of China Product description Modular straight through terminal blocks with srew connection according to the following type designations: Type designation Cross-section Rated Current Rated Insulation Voltage Cat. No. [mm 2 ] [A] [V] MBKKB 2,5 2,5/ MT 1,5 1,5 17, MT 1,5-PE 1, MT 1,5-TWIN 1,5 17, MT 1,5-TWIN-PE 1, MT 1,5-QUATTRO 1, MT 1,5-QUATTRO-PE 1, MTTB 1,5 1,5 17, UK 1,5 N 1,5 17, UK 2,5 N 2, UK 3 N 2,5/4 24/ UK 5 N 4/6 32/ UK 6 N 6/10 41/ UK 10 N 10/16 57/ UK 16 N UK 5 RETURN 4/6 32/ UK 5 RETURN-PE 4/ UK 5 RETURN-PE-1 4/ UKKB 5 4/ UKKB 5-PE 4/ Form No.: TA 1411a Issue: Page 2 of 5

3 Polyamide terminal blocks Type designation Cross-section Rated Rated Insulation Ins. Material Cat.No [mm 2 ] Current [A] Voltage [V] MBK 1, PA MBK 5/E PA UK 3 2, PA UKKB 3 2, PA UK 4 2, PA UDK 4 2, PA UDK 4-MTK 2, PA UVKB 4-FS 2,5(4) (2) PA UVKB 4-FS/FS 2,5(4) (2) PA PIK 4-PE/L/L PA PIK 4-L/L PA PIK 4-L PA UK PA UK 5-MTK PA UKK PA UKK 5-DIO 4 34/1(3) 500 PA UK PA URTK/S PA URTK/S-BEN PA UK PA UHSK/S PA UKH PA UKH PA UKH PA UKH70-PE/S PA UKH PA UKH PA UKH PA MTK 2, PA MTK-P/P 2, PA UK4-T-P/P 2, PA URELG 3 2,5 4) 250 PA URELG 4 2,5 4) 250 PA URELG 7 2,5 4) 250 PA URELG 3-PMTK 4 10(4) 250 PA URELG 4-PMTK 4 10(4) 250 PA URELG 7-PMTK 4 10(4) 250 PA ) Insulating material Polyamid 6.6 2) The rated voltage is of value for full insulated tabs. 3) Continous/limit current of the diode. 4) The current limit is determined by the relay. End cover, partition plate and separating plate to be used according to the Phoenix catalogue. Form No.: TA 1411a Issue: Page 3 of 5

4 Protective ground terminal block with screw terminal connection according to the following type designations: Type designation Cross section Ins. Material Cat.no. [mm 2 ] USLKG 1,5 N 1,5 PA USLKG 2,5 N 2,5 PA USLKG 6 N 6 PA USLKG 10 N 10 PA USLKG 16 N 16 PA USLKG 3 2,5 PA USLKG 4 4 PA USLKG 5 4 PA USLKG PA USLKG PA USLKG PA USLKG PA ) Insulating material Polyamid 6.6 End cover, partition plate and separating plate to be used according to Phoenix catalogue. Application/Limitation End cover, partition plate and separating plate to be used according to Phoenix catalogue. As to the workmanlike mounting, the accessories indicated in the Phoenix-catalogue shall be taken into consideration. Type Approval documentation Type designation Data sheet Dated DS-No MBKKB 2,5 EV-FEA/Ni/Schu Rev. 03 MT 1,5 EV-FEA/Krö/Schu Rev. 01 MT 1,5-PE EV-FEA/Krö/Schu Rev. 01 MT 1,5-TWIN EV-FEA/Krö/Schu Rev. 01 MT 1,5-TWIN-PE EV-FEA/Krö/Schu Rev. 01 MT 1,5-QUATTRO EV-FEA/Krö/Schu Rev. 02 MT 1,5-QUATTRO-PE EV-FEA/Krö/Schu Rev. 01 MTTB 1,5 EV-FEA/Krö/Schu Rev. 01 UK 1,5 N EV-FEA/Krö/Schu Rev. 06 UK 2,5 N EV-FEA/Ni/Schu Rev. 00 UK 5 N FEAL/Ni/Schu Rev. 05 UK 16 N EV-FEA/Krö/Schu Rev. 05 UK 5-RETURN FEAL/Ni/Schu Rev. 01 UK 5-RETURN-PE FEAL/Ni/Schu Rev. 01 UK 5-RETURN-PE-1 FEAL/Ni/Schu Rev. 00 ZFK 4-TG EV-FEA/Töb/Schu Rev. 00 Phoenix contact laboratory datasheet GB Phoenix contact laboratory datasheet GB Phoenix contact test report no Phoenix contact test report no Phoenix contact test report no DS-No FEAL/Ni/Schu rev VDE Prüfbericht /A2 Dr. Dg-th-me Form No.: TA 1411a Issue: Page 4 of 5

5 Bundesanstalt für Materialprüfung 3.2/3376/84 Phoenix contact test report Phoenix contact test report no Verband Deutcher Elektrotechniker (VDE) Prüfbericht /A2 Dr. Dg-th-me Bundesanstalt für Materialprüfung 3.2/3376/84 Type designation Data sheet Dated DS-No Test Nos. *) USLKG 1,5 N EV-FEA/Krö/Schu Rev. 00 1) USLKG 2,5 N EV-FEA/Ni/Schu Rev. 05 2) & 3) USLKG 6 N EV-FEA/Krö/Schu Rev. 02 1) USLKG 10 N EV-FEA/Krö/Schu Rev. 02 1) USLKG 16 N EV-FEA/Ni/Schu Rev. 04 2) & 3) USLKG 3 EV-FEA/Ni/Schu Rev. 05 2) & 3) USLKG 5 EV-FEA/Ni/Schu Rev. 06 2) & 3) USLKG 50 EV-FEA/Ni/Schu Rev. 04 2) & 3) *) For description of tests carried out on the specific product, please see the section below. Tests carried out IEC (2002), IEC (2002) 1) IEC (2002) 2) DIN VDE ( ) 3) IEC 17B (Sec) 446 (1992) (partly) Marking of product Phoenix Contact - Type designation - Main data. All type designation may be followed by suffix such as color or packaging options. Periodical assessment The scope of the periodical assessment survey is to verify that the conditions stipulated for the Type approval is complied with and that no alterations are made to the product design or choice of materials. The main elements of the survey are: Inspection on factory samples, selected at random from the production line (where practicable) Results from Production Sample Tests (PST) and Routines (RT) checked (if not available tests according to PST and RT to be carried out) Review of type approval documentation Review of possible change in design, materials and performance Ensuring traceability between manufacturer s product type marking and Type Approval Certificate. Survey to be performed at least every second year. END OF CERTIFICATE Form No.: TA 1411a Issue: Page 5 of 5

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: E-13902 File No: 823.60 Job Id: 262.1-003417-8 This is to certify: That the Motor Starter with type designation(s) GV2-ME, GV2-P and GV2-L Issued to Schneider

More information

DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE

DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE Page 1 of 5 DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-9389 This Certificate consists of 5 pages This is to certify that the Motor Starter 823.60 with type designation(s) Altistart

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: A-14136 File No: 899.60 Job Id: 262.1-018818-1 This is to certify: That the Peripheral Equipment with type designation(s) Ha-VIS econ 2000 series, econ 3000 series

More information

DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE

DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. D-3744 This Certificate consists of 4 pages. This is to certify that the Marine Riser Equipment with type designation(s) Manual Running Tool

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: E-14027 File No: 822.21 Job Id: 262.1-010767-3 This is to certify: That the Frequency Converter with type designation(s) NXA, NXB, NXI, NXN & NXP Issued to Vacon

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: E-12943 File No: 822.21 Job Id: 262.1-004066-3 This is to certify: That the Frequency Converter with type designation(s) FC30X series, Issued to Danfoss Drives

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. P-13583 This is to certify that the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) Alfagomma:

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAE000010D This is to certify: That the Frequency Converter with type designation(s) ACS800LC Issued to ABB Oy, Drives, is found to comply with DNV GL rules for

More information

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft Certificate No: TE00001J9 This is to certify: That the Frequency Converter with type designation(s) NXS Issued to Vacon Ltd VS, Finland is found to comply with DNV GL rules for classification Ships, offshore

More information

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft Certificate No: TAE000008C Revision No: 2 This is to certify: That the Frequency Converter with type designation(s) FC-302 series, Issued to Danfoss Drives A/S GRAASTEN, Denmark is found to comply with

More information

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft Certificate No: TAE000008A Revision No: 2 This is to certify: That the Frequency Converter with type designation(s) FC102 series, Issued to Danfoss Drives A/S GRAASTEN, Denmark is found to comply with

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: P-15161 File No: 791.70 Job Id: 262.1-008998-2 This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type

More information

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft

is found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft Certificate No: TAA000014K Revision No: 1 This is to certify: That the Peripheral Equipment with type designation(s) JUMO AQUIS touch P (202580), JUMO DICON touch (703571) Issued to JUMO GmbH & Co. KG

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAA000016D This is to certify: That the Governor Control System with type designation(s) PRIAMOS I/II/III for Multi-Engine Propulsion or Gen-Set Applications Issued

More information

REDUNDANT PROPULSION SHIPS RULES FOR CLASSIFICATION OF NEWBUILDINGS DET NORSKE VERITAS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2

REDUNDANT PROPULSION SHIPS RULES FOR CLASSIFICATION OF NEWBUILDINGS DET NORSKE VERITAS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2 RULES FOR CLASSIFICATION OF SHIPS NEWBUILDINGS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2 REDUNDANT PROPULSION JANUARY 2003 This booklet includes the relevant amendments and corrections

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAP000005T Revision No: 1 This is to certify: That the Plate Heat Exchanger with type designation(s) See certificate Issued to Sondex A/S KOLDING, Denmark is found

More information

REDUNDANT PROPULSION SHIPS RULES FOR CLASSIFICATION OF NEWBUILDINGS DET NORSKE VERITAS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2

REDUNDANT PROPULSION SHIPS RULES FOR CLASSIFICATION OF NEWBUILDINGS DET NORSKE VERITAS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2 RULES FOR CLASSIFICATION OF SHIPS NEWBUILDINGS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2 REDUNDANT PROPULSION JANUARY 2011 CONTENTS PAGE Sec. 1 General Requirements... 4 Sec. 2 System

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) 2SN, 4SP, 4SH Issued to TEKNO HOSE

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K3 Revision No: 1 This is to certify: That the Check Valve with type designation(s) 05414, 05417, 05419, 05714, 05717, 05719 Issued to Herose GmbH Armaturen

More information

Class Status Report Current Status. SÆFARI Vegagerdin

Class Status Report Current Status. SÆFARI Vegagerdin Vegagerdin IMO number: DNV number: If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K7 Revision No: 1 This is to certify: That the Safety Valve with type designation(s) Safety valves with bellow seal, Types: 06800, 06801, 06805, 06806

More information

EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE

EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE Certificate No: MRA0000017 This Certificate is issued to ABB Automation Products GmbH Heidelberg, Germany for Computers and Programmable Logic Controllers

More information

SHOCK TESTING OF EQUIPMENT AND SYSTEMS NAVAL APPLICATIONS

SHOCK TESTING OF EQUIPMENT AND SYSTEMS NAVAL APPLICATIONS CLASSIFICATION NOTES No. 57.1 SHOCK TESTING OF EQUIPMENT AND SYSTEMS NAVAL APPLICATIONS JANUARY 2002 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous

More information

Approval Engineer: Nina Thorvaldsen Moberg Inger-Helene Hals Head of Section

Approval Engineer: Nina Thorvaldsen Moberg Inger-Helene Hals Head of Section Certificate No: S-8431 File No: 911.53 Job Id: 262.1-018623-1 This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) 50T to 320T Bow Shackle

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. S-6397 Holder of Certificate BREVINI POWER TRANSMISSION S.p.A. REGGIO EMILIA RE, Italy This is to certify that the Gears with type designation(s)

More information

Systems and Arrangement for Meeting Regulations in Emission Control Areas (ECA)

Systems and Arrangement for Meeting Regulations in Emission Control Areas (ECA) RULES FOR CLASSIFICATION OF Ships PART 6 CHAPTER 25 NEWBUILDINGS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS Systems and Arrangement for Meeting Regulations in Emission Control Areas (ECA) JANUARY 2010

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAP00000HM This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) G1, G2, M3K, M4K, M5K,

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAS00000K9 This is to certify: That the Chain, shackles, swivels, sockets with type designation(s) Wide Body Shackles Issued to Crosby Group LLC Tulsa OK, United

More information

RULES FOR CLASSIFICATION Yachts. Part 4 Systems and components Chapter 6 Piping systems. Edition December 2015 DNV GL AS

RULES FOR CLASSIFICATION Yachts. Part 4 Systems and components Chapter 6 Piping systems. Edition December 2015 DNV GL AS RULES FOR CLASSIFICATION Yachts Edition December 2015 Part 4 Systems and components Chapter 6 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL").

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: K-6282 File No: 334. Job Id: 262.1-019560-1 This is to certify: That the Structural Cementitious Grout with type designation(s) MasterFlow 9500 Issued to BASF

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAP00000B1 This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) GATES hoses with DICSA

More information

ROTATING MACHINERY, GENERAL

ROTATING MACHINERY, GENERAL RULES FOR CLASSIFICATION OF SHIPS / HIGH SPEED, LIGHT CRAFT AND NAVAL SURFACE CRAFT NEWBUILDINGS MACHINERY AND SYSTEMS MAIN CLASS PART 4 CHAPTER 2 ROTATING MACHINERY, GENERAL JANUARY 2011 CONTENTS PAGE

More information

This is to certify: Application : Certificate No: TAA00000FJ. That the Miscellaneous. with type designation(s) K-Bridge and K-Nav system platforms

This is to certify: Application : Certificate No: TAA00000FJ. That the Miscellaneous. with type designation(s) K-Bridge and K-Nav system platforms Certificate : TAA00000FJ This is to certify: That the Miscellaneous with type designation(s) K-Bridge and K-Nav system platforms Issued to Kongsberg Maritime AS KONGSBERG, rway is found to comply with

More information

Approved for use as fixed fire extinguishing system for machinery spaces and cargo pump rooms.

Approved for use as fixed fire extinguishing system for machinery spaces and cargo pump rooms. Certificate No: TAF00000D7 This is to certify: That the Waterbased Fixed Fire Extinguishing System with type designation(s) VID Fire-Kill K6 Pacific Fine Water Spray (ceiling), VID Fire-Kill K6 North Sea

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAP00000YK This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) Flexor1ST,1A,1SN,1AT

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAP00000RH Revision No: 1 This is to certify: That the Ball Valve with type designation(s) BKH, BKHP, MKHP, KH-ISO, KHSAE Issued to MHA ZENTGRAF GmbH & Co. KG

More information

This is to certify: Application : Certificate No: TAS000011V Revision No: 1. That the Lifting set for Offshore containers and Portable Offshore Units

This is to certify: Application : Certificate No: TAS000011V Revision No: 1. That the Lifting set for Offshore containers and Portable Offshore Units Certificate No: TAS000011V Revision No: 1 This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) Green Pin Standard and Green Pin Polar shackles

More information

This is to certify: Application : Certificate No: TAS000011V. That the Lifting set for Offshore containers and Portable Offshore Units

This is to certify: Application : Certificate No: TAS000011V. That the Lifting set for Offshore containers and Portable Offshore Units Certificate No: TAS000011V This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) Green Pin Standard and Green Pin Polar shackles Issued to

More information

Pressure transmitter for marine applications MBS 33M

Pressure transmitter for marine applications MBS 33M Data sheet Pressure transmitter for marine applications MBS 33M The standard pressure transmitter MBS 33M is designed for use in almost all marine applications, and offers a reliable pressure measurement,

More information

DNVGL-CG-0194 Edition July 2017

DNVGL-CG-0194 Edition July 2017 CLASS GUIDELINE DNVGL-CG-0194 Edition July 2017 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL"). The user accepts that it is prohibited by anyone

More information

Pressure transmitter for marine applications MBS 3100 and MBS 3150

Pressure transmitter for marine applications MBS 3100 and MBS 3150 Data sheet Pressure transmitter for marine applications MBS 3100 and MBS 3150 The compact ship approved pressure transmitters MBS 3100 and MBS 3150 are designed for use in almost all marine applications.

More information

Disconnect and component terminal blocks

Disconnect and component terminal blocks MTK, UKK Disconnect and component terminal blocks General information In addition to the standard feedthrough modular terminal blocks, modular terminal blocks with different functions are also needed.

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAP000018Z Revision No: 1 This is to certify: That the Ballast Water Management System with type designation(s) PureBallast 3.2, PureBallast 3.2 Compact Flex Issued

More information

Three-phase motors for marine use

Three-phase motors for marine use Three-phase motors for marine use Contents Product description 11/2 Overview of technical data 11/7 Series K.../W4.. for Premium Efficiency IE3 11/8 Series K.../WE.. for High Efficiency IE2 11/12 Series

More information

OFFSHORE & VESSEL MARINE CABLE LADDER. Designed to offer high load capabilities but with significant weight savings.

OFFSHORE & VESSEL MARINE CABLE LADDER. Designed to offer high load capabilities but with significant weight savings. OFFSHORE & VESSEL MARINE CABLE LADDER Designed to offer high load capabilities but with significant weight savings. Independently tested by DNV GL for marine applications in accordance with IEC 61537 for

More information

Electrical connection systems

Electrical connection systems 1 Electrical connection systems Copper tubular cable lugs and connectors 10 Tubular cable lugs 10 Tubular cable lugs for switchgear connections 16 Angle tubular cable lugs 17 Connectors 21 Insulated tubular

More information

Yellow Point WARNING NEVER EXCEED PUBLISHED WORKING LOAD LIMIT. Catalog No YP. Copyright 2017 YOKE Industrial Corp. All Rights Reserved.

Yellow Point WARNING NEVER EXCEED PUBLISHED WORKING LOAD LIMIT. Catalog No YP. Copyright 2017 YOKE Industrial Corp. All Rights Reserved. Yellow Point Catalog No. 8-2017.YP 2 3 Yellow Point 4 Worldwide Quality Type Approval And Certificate: 5 Quality Control, Testing, and Detecting during manufacturing YOKE runs a constant and strict production

More information

PHOENIX CONTACT

PHOENIX CONTACT Current transformers INTERFACE Data sheet 03359_en_03 PHOENIX CONTACT 20-04-04 Description The PACT Analog current transformers form a complete range of bus-bar, plug-in and winding current transformers

More information

Heavy duty pressure switch MBC 5000 and MBC 5100

Heavy duty pressure switch MBC 5000 and MBC 5100 Data sheet Heavy duty pressure switch MBC 5000 and MBC 5100 MBC pressure switches are used in industrial and marine applications where space and reliability are the most important features. MBCs are compact

More information

ELECTRICAL INSTALLATIONS

ELECTRICAL INSTALLATIONS RULES FOR CLASSIFICATION OF SHIPS / HIGH SPEED, LIGHT CRAFT AND NAVAL SURFACE CRAFT NEWBUILDINGS MACHINERY AND SYSTEMS MAIN CLASS PART 4 CHAPTER 8 ELECTRICAL INSTALLATIONS JANUARY 2007 CONTENTS PAGE Sec.

More information

5.3. HellermannTyton product standards. Standards Overview. CSA Canadian Standards Association Canada. cul Canadian Underwriters Laboratories Canada

5.3. HellermannTyton product standards. Standards Overview. CSA Canadian Standards Association Canada. cul Canadian Underwriters Laboratories Canada 5.3 Appendix Standards Overview CSA Canadian Standards Association Canada cul Canadian Underwriters Laboratories Canada BV Bureau Veritas France DEF STAN Defence Standard Great Britain DNV Det Norske Veritas

More information

Kämmer Series Low Flow Valves

Kämmer Series Low Flow Valves flowserve.com Kämmer Series 030000 Low Flow Valves Description Kämmer series 030000 low flow valves are designed for precision controlling up to PN40. The body is a precision casting for high finishing

More information

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Catalog 0500CT9702R409 2009 Class 525/580 CONTENTS Description............................................. Page General Characteristics...................................

More information

Kämmer Series Split Body Valves

Kämmer Series Split Body Valves flowserve.com Kämmer Series 020000 Split Body s Description Kämmer Series 020000 are split body style valves manufactured from forged material. This engineering design easily adapts to meet application

More information

HULANE GROUP A Professional Connectors Manufacturer

HULANE GROUP A Professional Connectors Manufacturer Auto World, We Connect HULANE GROUP A Professional Connectors Manufacturer HL Auto Parts = High Level Auto Parts 2014/11/25~11/28 Table of Content Company Profile Products Products Development Facilities

More information

HULANE GROUP. Auto World, We Connect. A Professional Connectors Manufacturer. HL Auto Parts. = High Level Auto Parts 2017/05/16 1

HULANE GROUP. Auto World, We Connect. A Professional Connectors Manufacturer. HL Auto Parts. = High Level Auto Parts 2017/05/16 1 Auto World, We Connect HULANE GROUP A Professional Connectors Manufacturer HL Auto Parts = High Level Auto Parts 2017/05/16 1 Table of Content Company Profile Products Products Development Facilities &

More information

Technical Information

Technical Information Subject Equipment for the Singapore flag vessels To whom it may concern Technical Information No. TEC-1045 Date 28 August 2015 Regarding the requirement for equipment installed Singapore registered ships

More information

ZE motor-protective relay Overload monitoring of EEx e motors

ZE motor-protective relay Overload monitoring of EEx e motors Building Automation Industrial Automation Systems Hardware and Engineering ZE motor-protective relay Overload monitoring of EEx e motors 0/0 AWB300-5GB A Think future. Switch to green. All brand and product

More information

PTB Ex Proficiency Testing Program (PTB Ex PTP) Interlaboratory comparisons in explosion protection

PTB Ex Proficiency Testing Program (PTB Ex PTP) Interlaboratory comparisons in explosion protection ExTAG PTB Ex Proficiency Testing Program (PTB Ex PTP) Interlaboratory comparisons in explosion protection Dr Uwe Klausmeyer Convenor of ExTAG WG 10 Proficiency Testing Introduction / Importance Principles

More information

Marine Motors. Product Catalogue. in Compliance with Marine Classification Authorities ISO 9001

Marine Motors. Product Catalogue. in Compliance with Marine Classification Authorities ISO 9001 in Compliance with Marine Classification Authorities ISO 9001 Product Catalogue Cantoni Motor S.A. M. Gra yñskiego 22, 43-300 Bielsko-Bia³a, Poland tel.: +48 33 813 87 00 fax: +48 33 813 87 01 motor@cantonigroup.com

More information

Pressure transmitter for marine applications Type MBS 5100 and MBS 5150

Pressure transmitter for marine applications Type MBS 5100 and MBS 5150 Data sheet Pressure transmitter for marine applications Type MBS 5100 and MBS 5150 The ship approved high accuracy block pressure transmitter is designed for use in almost all marine applications. MBS

More information

CERTIFICATE OF FIRE APPROVAL

CERTIFICATE OF FIRE APPROVAL LR009.030.1 CERTIFICATE OF FIRE APPROVAL This is to certify that The product(s) detailed below will be accepted for compliance with the applicable Lloyd s Register Rules and Regulations for use on offshore

More information

Certificate of Acceptance

Certificate of Acceptance Class II Hybrid Signalling Power Products Product Description Product Image A range of Class II Hybrid Signalling Transformers, Transformer-rectifiers and Multioutput Power Supplies for Signalling applications.

More information

PT 2,5-QUATTRO-PE. Extract from the online catalog. Order No.:

PT 2,5-QUATTRO-PE. Extract from the online catalog. Order No.: Extract from the online catalog PT 2,5-QUATTRO-PE Order No.: 3209594 Ground modular terminal block, Connection method: Push-in connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm, Color: green-yellow,

More information

ST-COMBI 4 mm 2 Pluggable Spring-Cage Terminal Blocks

ST-COMBI 4 mm 2 Pluggable Spring-Cage Terminal Blocks ST-COMBI 4 mm 2 Pluggable Spring-Cage Terminal Blocks The Þelds of application for the pluggable ST-COMBI spring-cage terminal blocks has been added to with solutions for larger conductor cross sections

More information

Isolating transformer DS0107. Three-phase isolating transformers for the supply of three-phase loads in medical locations

Isolating transformer DS0107. Three-phase isolating transformers for the supply of three-phase loads in medical locations Three-phase isolating transformers for the supply of three-phase loads in medical locations DS0107_D00105_00_D_XXEN/05.2015 Three-phase isolating transformers for the supply of three-phase loads in medical

More information

Guideline No.: E-03(201806) E-03 MOTORS. Issued date: June 7, China Classification Society

Guideline No.: E-03(201806) E-03 MOTORS. Issued date: June 7, China Classification Society Guideline No.: E-03(201806) E-03 MOTORS Issued date: June 7, 2018 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection and testing

More information

KAUAI ISLAND UTILITY COOPERATIVE KIUC Tariff No. 1 RULE NO. 17 NET ENERGY METERING

KAUAI ISLAND UTILITY COOPERATIVE KIUC Tariff No. 1 RULE NO. 17 NET ENERGY METERING Third Revised Sheet 55a Cancels Second Revised Sheet 55a A. ELIGIBLE CUSTOMER-GENERATOR RULE NO. 17 NET ENERGY METERING Net energy metering is available to eligible customer-generators, defined as, permanent

More information

FORGED STAINLESS STEEL Rack And Pinion Actuator S Series

FORGED STAINLESS STEEL Rack And Pinion Actuator S Series FORGED STAINLESS STEEL Rack And Pinion Actuator S Series The Air Torque S Series stainless steel actuators are a corrosion resistant rack and pinion actuator particularly engineered for corrosive environments

More information

HULANE GROUP. Auto World, We Connect. A Professional Connectors Manufacturer. HL Auto Parts. = High Level Auto Parts 2015/07/06~07/08 1

HULANE GROUP. Auto World, We Connect. A Professional Connectors Manufacturer. HL Auto Parts. = High Level Auto Parts 2015/07/06~07/08 1 Auto World, We Connect HULANE GROUP A Professional Connectors Manufacturer HL Auto Parts = High Level Auto Parts 2015/07/06~07/08 1 Table of Content Company Profile Products Products Development Facilities

More information

Black Teknigas Combustion Range

Black Teknigas Combustion Range Black Teknigas Combustion Range Solenoid Gas Safety Shut-Off Valves WattsIndustries.co.uk SOLENOID GAS SAFETY SHUT-OFF VALVES Provengas Automatic Gas Proving and Isolation System A range of gas proving

More information

technology made in Italy ISM BSM

technology made in Italy ISM BSM technology made in Italy GB ISM BSM * * VS made in China Technology Made in Italy Since 1955 Varvel has been making speed reducers and variators for light industry applications. Reliable partner in power

More information

EC TYPE-EXAMINATION CERTIFICATE

EC TYPE-EXAMINATION CERTIFICATE DET NORSKE VERITAS EC TYPE-EXAMINATION CERTIFICATE Application of: Council Directive 96/98/EC of 20 December 1996 on Marine Equipment as amended by directive 2009/26/EC, issued as "Forskrift om Skipsutstyr"

More information

When ordering, please state type and code number. Suitable sensor length. Max. Cap. range. tube adjust- see also Accessories. sensor. temp.

When ordering, please state type and code number. Suitable sensor length. Max. Cap. range. tube adjust- see also Accessories. sensor. temp. Thermostats Description KPS thermostats are temperature-controlled switches. The position of the contacts depends on the temperature of the sensor and the set value. In this series, special attention has

More information

PT 2,5-QUATTRO/2P BU. Extract from the online catalog. Order No.:

PT 2,5-QUATTRO/2P BU. Extract from the online catalog. Order No.: Extract from the online catalog PT 2,5-QUATTRO/2P BU Order No.: 3209675 Feed-through modular terminal block, Connection method: Pushin / plug connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,

More information

Expertise. Hydraulics. What you should know about us. excellent pressure solutions

Expertise. Hydraulics. What you should know about us. excellent pressure solutions Expertise Hydraulics What you should know about us excellent pressure solutions Welcome to Roth Hydraulics We develop and produce custom designed products and systems for fluid technology. Our core products

More information

Guideline No.: E-03(201610) E-03 MOTORS. Issued date: October 28,2016. China Classification Society

Guideline No.: E-03(201610) E-03 MOTORS. Issued date: October 28,2016. China Classification Society Guideline No.: E-03(201610) E-03 MOTORS Issued date: October 28,2016 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection and

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE Page 1 / 5 File number: AP4599 Product code: 2592I This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com Requirements: Bureau Veritas Rules

More information

Automation Systems Drive Solutions Controls Inverters Motors Gearboxes Engineering Tools

Automation Systems Drive Solutions Controls Inverters Motors Gearboxes Engineering Tools L-force catalogue Automation Systems Drive Solutions Controls Inverters Motors Gearboxes Engineering Tools Motors: MD/MH Motor, Gearboxes: g200-w worm gearbox Gearboxes g200-w worm geared motors 0.15 to

More information

CERTIFICATE OF FIRE APPROVAL

CERTIFICATE OF FIRE APPROVAL LR427.203.2 CERTIFICATE OF FIRE APPROVAL This is to certify that The product(s) detailed below will be accepted for compliance with the applicable Lloyd s Register Rules and Regulations for use on offshore

More information

Development. COMPact impresses with a series of technical innovations and advantages, which make it efficient and economical to use.

Development. COMPact impresses with a series of technical innovations and advantages, which make it efficient and economical to use. Founded in: 1898 Employees: > 550 Subsidiaries: Manufacturing: Sales: Ortlinghaus (U.K.) Ltd. / England Ortlinghaus France / France Ortlinghaus AG / Switzerland Ortlinghaus Drive Technology (Shanghai)

More information

Loesche Group. Image Presentation. Johannes Wallis Sofia,

Loesche Group. Image Presentation. Johannes Wallis Sofia, Loesche Group Image Presentation Johannes Wallis Sofia, 2013-11-06 Agenda History Loesche Today What we do Procurement 2 Agenda 1. History 2. Loesche today 3. What we do 4. Procurement 3 History Video

More information

IB IL 24 PWR IN/F-D IB IL 24 PWR IN/F-D-PAC

IB IL 24 PWR IN/F-D IB IL 24 PWR IN/F-D-PAC IB IL 24 PWR IN/F-D IB IL 24 PWR IN/F-D-PAC Inline Power Terminal With Fuse and Diagnostics Data Sheet 5569C 02/2003 # # $ ' ) The IB IL 24 PWR IN/F-D and IB IL 24 PWR IN/F-D-PAC only differ in the scope

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE Page 1 / 9 File number: AP 63 Product code: 2592I This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com Requirements: Bureau Veritas Rules

More information

Ortlinghaus Group. Prop.act impresses with a series of technical innovations and advantages, which make it efficient and economical to use.

Ortlinghaus Group. Prop.act impresses with a series of technical innovations and advantages, which make it efficient and economical to use. Founded in: 1898 Employees: > 550 Subsidiaries: Manufacturing: Sales: Ortlinghaus (U.K.) Ltd. / England Ortlinghaus France / France Ortlinghaus AG / Switzerland Ortlinghaus Drive Technology (Shanghai)

More information

Spring Cage Miniature Terminal Blocks FK-MPT 0,5/ -3,5

Spring Cage Miniature Terminal Blocks FK-MPT 0,5/ -3,5 Spring Cage Miniature Terminal Blocks FK-MPT 0,5/ -3,5 The mini print terminals, FK-MPT 0,5 and FK-MPT 0,5 -H provide one double connection per position across a 3.5 mm pitch. This space-saving arrangement

More information

Kämmer Series Low Flow Valve

Kämmer Series Low Flow Valve flowserve.com Kämmer Series 080000 Low Flow Valve Description Kammer series 080000/081000 low flow laboratory valves are designed for precision controlling. The body is manufactured from bar stock stainless

More information

to use the European Mark Licence No Date of issue: Wien, Rev. No. 02 Wien,

to use the European Mark Licence No Date of issue: Wien, Rev. No. 02 Wien, AUSTRIAN ELECTROTECHNICAL ASSOCIATION 00 Wien, Eschenbachgasse 9 ZVR: 27279890 DVR: 055887 Testing & Certification Kahlenberger Str. 2A 90 Wien, Austria Phone: +4 70 58 06 Fax: +4 70 58 06-99 LICENCE to

More information

Control Cable Type T/N 600/1000 volts DRILMAR 90 Polyvinyl Chloride/Nylon Insulated Drilling Rig and Marine Cable

Control Cable Type T/N 600/1000 volts DRILMAR 90 Polyvinyl Chloride/Nylon Insulated Drilling Rig and Marine Cable PVC Jacket (overall optional) Armor (optional) PVC Jacket Color-coded PVC/Nylon Insulation Copper ed 600/00 volts Features Maximum conductor operating temperature: 90ºC per IEEE, UL, and CSA. Meets applicable

More information

Global Polybutadiene Rubber (BR) Market Study ( )

Global Polybutadiene Rubber (BR) Market Study ( ) Global Polybutadiene Rubber (BR) Market Study (2014 2025) Table of Contents 1. INTRODUCTION 1.1. Introduction to Polybutadiene Rubber Market Product Description Properties Industry Structure Value Chain

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 19102 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.09.2013 to 02.09.2018 Holder of certificate: AUCOTEAM

More information

DNVGL-CP-0110 Edition March 2016

DNVGL-CP-0110 Edition March 2016 CLASS PROGRAMME Type approval DNVGL-CP-0110 Edition March 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD

More information

Cutler-Hammer. Molded Case Circuit Breakers Amperes. Product Selection January 2001 Vol. 1, Ref. No ) J-Frame

Cutler-Hammer. Molded Case Circuit Breakers Amperes. Product Selection January 2001 Vol. 1, Ref. No ) J-Frame Vol. 1, Ref. No. 10499) Product Selection Table 12-56. Types 12-33 12-2 Product Line Overview Vol. 1, Ref. No. [0468] 12 Product Line Description Cutler-Hammer Molded Case Circuit Breakers are designed

More information

ALUMINIUM EXTRUSION CATALOGUE

ALUMINIUM EXTRUSION CATALOGUE ALUMINIUM EXTRUSION CATALOGUE Contents 04 Geometric Sections 52 Extrusion Applications 126 Capral Aluminium Fabrication 130 Alloy, Temper and Mechanical Specifications B Who is Capral Aluminium and what

More information

Cover Sheet for Supplier Information of. Broetje-Automation Group

Cover Sheet for Supplier Information of. Broetje-Automation Group 1. Cover Sheet Cover Sheet for Supplier Information of Broetje-Automation Group Within the scope of DIN EN 9100, we as Broetje-Automation Group are required to check the performance of our suppliers and

More information

SIRCO MC PV. Solar Disconnect Switch up to 40 A, up to 1000 Vdc

SIRCO MC PV. Solar Disconnect Switch up to 40 A, up to 1000 Vdc SIRCO MC PV Solar Disconnect Switch up to 40 A, up to 1000 Vdc Your guarantee for safe & reliable switching of photovoltaic circuits Taking into account the specificity and technical constraints of solar

More information

BALLAST WATER MANAGEMENT CONVENTION. Your guide to compliance. Move Forward with Confidence

BALLAST WATER MANAGEMENT CONVENTION. Your guide to compliance. Move Forward with Confidence BALLAST WATER MANAGEMENT CONVENTION Your guide to compliance Move Forward with Confidence BALLAST WATER MANAGEMENT CONVENTION: WHAT DOES IT MEAN FOR YOU? WHAT IS THE BWM CONVENTION AND WHAT DOES IT AIM

More information

BALLAST WATER MANAGEMENT CONVENTION. Your guide to compliance. Move Forward with Confidence

BALLAST WATER MANAGEMENT CONVENTION. Your guide to compliance. Move Forward with Confidence BALLAST WATER MANAGEMENT CONVENTION Your guide to compliance Move Forward with Confidence BALLAST WATER MANAGEMENT CONVENTION: WHAT DOES IT MEAN FOR YOU? Invasive aquatic species, from fish and animals

More information

JUMO safetym TB/TW Temperature limiter, temperature monitor according DIN EN

JUMO safetym TB/TW Temperature limiter, temperature monitor according DIN EN JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net

More information

0 to 100 up to 0 to PSI (gage) Packard Electric Metri-Pack 150 Series, M12-4 Pole* 1/4-18 NPT ma, VDC, 0-5 VDC, 0-10 VDC

0 to 100 up to 0 to PSI (gage) Packard Electric Metri-Pack 150 Series, M12-4 Pole* 1/4-18 NPT ma, VDC, 0-5 VDC, 0-10 VDC Data Sheet PTA5000 Hermetically Sealed Modular Pressure Sensor Main Features Pressure Ranges Electrical Connection Pressure Connection 0 to 100 up to 0 to 10.000 PSI (gage) Packard Electric Metri-Pack

More information