EC TYPE-EXAMINATION CERTIFICATE
|
|
- Rosalind Perkins
- 6 years ago
- Views:
Transcription
1 <0> DET NORSKE VERITAS EC TYPE-EXAMINATION CERTIFICATE Application of: Council Directive 96/98/EC of 20 December 1996 on Marine Equipment as amended by directive 2009/26/EC, issued as "Forskrift om Skipsutstyr" by the Norwegian Maritime Directorate. This Certificate is issued by Det Norske Veritas under the authority of the Government of the Kingdom of Norway. CERTIFICATE NO. MED-B-6546 This is to certify that the Heading control system (HCS) with type designation(s) K-Pos Heading Control System Manufacturer Kongsberg Maritime AS KONGSBERG, Norway is found to comply with the requirements in the following Regulations/Standards: Annex A.1, item No. A.1/4.16 and Annex B, Module B in the Directive. SOLAS 74 as amended, Regulation V/18 & V/19, IMO Resolution A.342 (IX) & A.694(17) and IMO Resolution MSC. 64(67) Annex 3 & 191(79) Further details of the equipment and conditions for certification are given overleaf. Høvik, for Det Norske Veritas AS This Certificate is valid until Notified Body No.: 0575 Head of Department DNV local office: DNV Sandefjord Roger Lauritsen Surveyor The Certificate is subject to terms and conditions overleaf. Any significant changes in design or construction of the product, or amendments to the Directive or Standards referenced above may render this Certificate invalid. The product liability rests with the manufacturer or his representative in accordance with Council Directive 96/98/EC, as amended. The Mark of Conformity may only be affixed to the product and a Declaration of Conformity may only be issued when the production/product assessment module referred to in the council directive, is fully complied with. Form No.: MED.Ba Issue: April 2010 Page 1 of 7
2 Product description See Appendix. For latest revision of the Appendix, see Applications/Limitations See Appendix. Type Examination documentation See Appendix Tests carried out Performance testing, ISO (2006) Environmental testing, IEC (2002) Serial interface testing, IEC (2007) Presentation testing, IEC (2008) Marking of product The Manufacturer and Type Designation to be applied to the equipment in a clearly visible location and in addition the equipment shall be marked with serial number, safe distance to magnetic compass, power consumption and/ or supply voltage. Mark of Conformity The manufacturer is allowed to affix the Mark of Conformity according to Article 11 in the Council Directive 96/98/EC on Marine Equipment and shall issue a Declaration of Conformity, only when the module D or E or F of Annex B in the same directive is fully complied with. Module D: Module E: Module F: The quality system for production and testing shall be approved by the Notified Body. The quality system for inspection and testing shall be approved by the Notified Body. Compliance of the products to type as described in this EC Type-Examination Certificate must be verified by the Notified Body who also shall issue a Certificate of Conformity. USCG Approval An U.S. Coast Guard approval number will be assigned to the equipment when the production module has been completed and will appear on the production module certificate (module D, E or F), as allowed by the "Agreement between the United States of America and the EEA EFTA states on the mutual recognition of certificates of conformity for marine equipment" signed 17 October Form No.: MED.Ba Issue: April 2010 Page 2 of 7
3 Product description APPENDIX REV. NO. 4 (PAGE 1 OF 5) K-Pos Heading Control System consisting of the following components: Main processing unit: DPC Dynamic Positioning Controller with process unit(s) (RCU502 or RCU501 for SW 8.2.x /8.1.x or RCU501 for SW 7.1.x) Note: The term DPC-11 K-Pos DP Controller or DPC-21 K-Pos DP Controller is used to indicate that associated upgrade kit from SDP to K-Pos has been used. "DPC" is included in ADP701 K-Pos OS and in ADP702 K-Pos OS. cc Compact Controller with process unit (RCU502 or RCU 501 for SW 8.2.x/8.1.x or RCU501 for SW 7.1.x) Operating Station/Terminal: K-Pos OS Operator Station for K-Pos DP/DPM/PM (including built-in versions) Note: The prefix SN96, KS-01, KS-03, KM-04 or KNC-620 is used to indicate that associated upgrade kit from SDP to K-Pos has been used. The terms ADP701 K-Pos OS and ADP702 K-Pos OS indicate that associated upgrade kit from ADP to K-Pos has been used. The ADP701 K-Pos OS and ADP702 K-Pos OS also include the "DPC". K-Thrust OS Operator Station as part of Thruster Control (including built-in versions) K-Master Operator station for DP TCP Computer : Matrix MXE-5104 or MP8300 Base Model Application server for DP : MP8300 Base Model Main Display Server : MP8300 Matrox Extio Model Network units : HP 3600 El.switch JG299A or HP 3600 El.switch JG303A w/fibre USB extender : Veinland USB Extender VL T/R Power unit : Phoenix Contact QUINT-PS/1AC/24DC/10 Operator interface : Display 13.3 TCP, K-Master units (Heading Wheel, Joystick, Alarm Panel, Utility Panel, I/O Controller), COP-05 Standalone Trackball Main display : Display LCD MD27 Mk2 or MD26 16:10 ECDIS Mk2 (if installed with K-Bridge) cpos OS Operator Station cjoy OT Operator Terminal for cjoy cjoy DP-OT Remote DP Operator Terminal (additional operating terminal) Note: For detalis referring to approved HW see Type Approval Hardware List and Maintenance manuals. Software version DP basis release 7.1, update 14 onwards DP basis release 8.1, update 3 onwards DP basis release 8.2, update 0 onwards K-Master release 2.0, update 0 onwards Applications/Limitations The Operating system is MS Windows XP or Windows 7 (release/update and computer dependent). Environmental testing, IEC The equipment is tested with respect to category protected. For Phoenix Contact QUINT-PS/1AC/24DC/10, reference made to certificate listed in type examination documentation. Form No.: MED.Ba Issue: April 2010 Page 3 of 7
4 APPENDIX REV. NO. 4 (PAGE 2 OF 5) Type Examination documentation DNV No. Description Certificate: A-12371, ISIC Monitors Certificate: A-12636, MP Certificate: A-13369, ISIC Monitors Certificate: A-13519, ISIC Monitors Certificate: E-12869, Quint PS Certificate: GL HH, Veinland USB extender via CAT Type VL66199-T/R Declaration of Conformity for JH20T06 KMD and JH23T02 KMD General Arrangement DPC-1 / 2 Cabinet, Doc. No /B General Arrangement DPC-3 Cabinet, Doc. No /B Hardware Module Description: Display MD26 16:10 ECDIS Mk2. Doc. No /A Hardware Module Description: K-Master Alarm Panel. Doc. No /B Hardware Module Description: K-Master DP and IJS Joystick. Doc. No /A Hardware Module Description: K-Master DP Joystick. Doc. No /B Hardware Module Description: K-Master Heading Wheel. Doc. No /A Hardware Module Description: K-Master I/O Controller. Doc. No /A Hardware Module Description: K-Master Matrix MXE-5104 Computer. Doc. No /A Hardware Module Description: K-Master Touch Control Panel 13.3" HD 13T21 KMD-DR1-CORx. Doc. No /D Hardware Module Description: K-Master Utility Panel. Doc. No /A Hardware Module Description: USB Extender VL T/R. Doc. No /A Hatteland Statement for K-Master 13,3" and 8" TCP`s HP DVD PR595A Product Declaration Interface Manual: K-Pos Interface Manual. Doc. No /C KM Statement, K-Master console test statement (KMX FWD Centre Console). Doc. No /A KM Statement, K-Master joystick test statement (K-Master 1 and 3 button joystick). Doc. No /A KM Statement, K-Master Pilot Chair test statement (K-Master Pilot Chairs). Doc. No /B KM Statement: K-Master Workstation, Vibration Test Statement. Doc. No /B Maintenance Manual: ADP701 K-Pos Operator Station. Doc. No /B Maintenance Manual: ADP701 K-Pos Operator Station. Doc. No /C Maintenance Manual: ADP701 K-Pos WS Mk3 Operator Station. Doc. No /B Maintenance Manual: ADP702 K-Pos Operator Station. Doc. No /D Maintenance Manual: ADP702 K-Pos Operator Station. Doc. No /E Maintenance Manual: ADP702 K-Pos WS Mk3 Operator Station. Doc. No /B Maintenance Manual: DPC-11 K-Pos DP Controller. Doc. No /D Maintenance Manual: DPC-11 K-Pos DP Controller. Doc. No /E Maintenance Manual: DPC-21 K-Pos DP Controller. Doc. No /D Maintenance Manual: DPC-21 K-Pos DP Controller. Doc. No /E Maintenance Manual: KM-04 K-Pos Mk2 Operator Station. Doc. No /A Maintenance Manual: KM-04 K-Pos Operator Station. Doc. No /C Maintenance Manual: KM-04 K-Pos WS Mk3 Operator Station. Doc. No /B Maintenance Manual: K-Master Forward Bridge. Doc. No /A Maintenance Manual: K-Master Pilot Chair. Doc. No /C Maintenance Manual: K-Master Server Cabinet (600x1600x600). Doc. No /G Maintenance Manual: K-Master Workstation. Doc. No /G Maintenance Manual: KNC-620 K-Pos Operator Station. Doc. No /A Maintenance Manual: KNC-620 K-Pos Operator Station. Doc. No /B Maintenance Manual: KNC-620 K-Pos WS Mk3 Operator Station. Doc. No /B Maintenance Manual: K-Pos, cpos and cjoy, cover and contents. Doc. No. TA-KPOS-2006-MM-CC_S Maintenance Manual: KS-01 K-Pos Mk2 Operator Station. Doc. No /A Maintenance Manual: KS-01 K-Pos Operator Station. Doc. No /C Form No.: MED.Ba Issue: April 2010 Page 4 of 7
5 APPENDIX REV. NO. 4 (PAGE 3 OF 5) Type Examination documentation continues Maintenance Manual: KS-01 K-Pos WS Mk3 Operator Station. Doc. No /B Maintenance Manual: KS-01/KS-03/KM-04 K-Pos Built-in Mk2 Operator Station. Doc. No /A Maintenance Manual: KS-01/KS-03/KM-04 K-Pos Built-in Operator Station. Doc. No /C Maintenance Manual: KS-01/KS-03/KM-04 K-Pos Built-in WS Mk3 Operator Station. Doc. No /B Maintenance Manual: KS-03 K-Pos Mk2 Operator Station. Doc. No /A Maintenance Manual: KS-03 K-Pos Operator Station. Doc. No /C Maintenance Manual: KS-03 K-Pos WS Mk3 Operator Station. Doc. No /B Maintenance Manual: SN96 K-Pos Built-in Mk2 Operator Station. Doc. No /A Maintenance Manual: SN96 K-Pos Built-in Operator Station. Doc. No /E Maintenance Manual: SN96 K-Pos Built-in WS Mk3 Operator Station. Doc. No /B Maintenance Manual: SN96 K-Pos Mk2 Operator Station. Doc. No /A Maintenance Manual: SN96 K-Pos Operator Station. Doc. No /E Maintenance Manual: SN96 K-Pos WS Mk3 Operator Station. Doc. No /B Operator Manual: cjoy DP-OT, Remote DP Operator Terminal (Release 8.2). Doc. No /A Operator Manual: cjoy DP-OT, Remote DP Operator Terminal. Doc. No /E Operator Manual: cjoy DP-OT, Remote DP Operator Terminal. Doc. No /D Operator Manual: cjoy OT, Joystick System (Release 8.2). Doc. No /A Operator Manual: cjoy OT, Joystick System. Doc. No /E Operator Manual: cjoy OT, Joystick System. Doc. No /E Operator Manual: cpos (OS), Dynamic Positioning System (Release 8.2) Doc. No /A Operator Manual: cpos (OS), Dynamic Positioning System. Doc. No /E Operator Manual: cpos (OS), Dynamic Positioning System. Doc. No /D Operator Manual: K-Master Release 2.0. Doc. No /A Operator Manual: K-Pos Autopilot Mode (Release 8.2) Doc. No /A Operator Manual: K-Pos Autopilot Mode. Doc. No /B Operator Manual: K-Pos Autopilot Mode. Doc. No /B Operator Manual: K-Pos DPM (OS), Dynamic Positioning and Position Mooring System (Release 8.2). Doc. No /B Operator Manual: K-Pos DPM (OS), Dynamic Positioning and Position Mooring System (Release 8.2.1). Doc. No /C Operator Manual: K-Pos DPM (OS), Dynamic Positioning and Position Mooring System. Doc. No /J Operator Manual: K-Pos DPM (OS), Dynamic Positioning and Position Mooring System. Doc. No /D Product Description Kongsberg cjoy and cpos, Compact Joystick and DP Control Systems. Doc. No /F Product Description Kongsberg K-Pos DP, Dynamic Positioning System. Doc. No /B Release Notes for DP Basis Doc. No /A Release Notes for DP Basis Doc. No /A Release Notes for DP Basis Doc. No /B Release Notes for K-Master Basis (2.0). Doc. No /A Report: SW test report, Conning View, SW Statement for JH19T14 MMD-MA1-SABA Survey Report: KM K-Pos HCS, SW (DNV ) Test Description: Functional test of DP Autopilot. Doc. No /H Test Description: I/O test of DP Autopilot. Doc. No /D Test Report: DELTA DANAK , Project no.: A (COP-05 Input Panel) Test Report: DELTA DANAK , Project no.: A (RCU 502) Test Report: DELTA DANAK , Project no.: A , Rev.1 (COP-05) Test Report: DELTA DANAK , Project no.: A (DPC-3 cabinet) Test Report: DELTA DANAK , Project no.: A (RIO) Test Report: DELTA DANAK , Project no.: A (DIVA modem) Test Report: DELTA DANAK , Project no.: A (MP7600 on wire-isolators) Test Report: DELTA DANAK , Project no.: A (KM-05 DL, MP7600, wire-isolators) Form No.: MED.Ba Issue: April 2010 Page 5 of 7
6 APPENDIX REV. NO. 4 (PAGE 4 OF 5) Type Examination documentation continues Test Report: DELTA DANAK , Project no.: A (MP7600 on rubber isolators) Test Report: DELTA DANAK , Project no.: A (KM-05 DL, MP7600, rubber isolators) Test Report: DELTA DANAK , Project no.: A (CAN2DP) Test Report: DELTA DANAK , Project no.: A (IP22 KM-05) Test Report: DNV Report No Rev.01. Compass safe distance Test Report: DNV Report No Rev.01. Envir.Testing of Joystick Type KM-MOD Test Report: DNV Report No (IP22 test of COP-05 unit: Heading Wheel) Test Report: DNV Report No (IP22 test of COP-05 unit: Input Panel with Tracker Ball) Test Report: DNV Report No (JH19T14 MMD-MA1-SABA) Test Report: DNV Report No (JH19T14 MMD-MA1-AAAA) Test Report: DNV Report No Data Responce Norway, (MXE-5104 Maritime PC) Test Report: DNV Report No (HD13T21 KMD-DR1-CORP) Test Report: Functional, DP Autopilot. Doc. No /H FTR Test Report: HP Compaq dc7600 SFF PC, Mariner Systems Env. Test TL1005 Rev Test Report: I/O, DP Autopilot. Doc. No /D FTR Test Report: JH23T02 KMD-E3: DNV Confirmation of Tests (Vibration and Climatic Test) Test Report: Joystick KC 06, Environmental, Thales Doc. Ident XX Test Report: K-Master FWD Bridge Fallback Modes and Effects. Doc. No /B FTR Test Report: Kongsberg MP7900 PC, Mariner Systems Env. Test TL Test Report: K-Pos HCS with K-Master Chair/Workstation. Doc. No391978/_BFTR Test Report: Mariner Systems, Report no. TL1582-EMC, Kongsberg MP Test Report: Mariner Systems, Report no. TL1582-ENV Issue 01, Kongsberg MP Test Report: Mariner Systems, Report no. TL1583-EMC, Kongsberg MP Test Report: Mariner Systems, Report no. TL1583-ENV Issue 01, Kongsberg MP Test Report: MS Testing, TL13074-EMC, Kongsberg MP8300 PC Test Report: MS Testing, TL13074-ENV, Kongsberg MP8300 PC Test Report: MS Testing, TL13075-EMC, Kongsberg MP8300 PC Test Report: MS Testing, TL13075-ENV, Kongsberg MP8300 PC Test Report: MS Testing, TL13130-EMC, Kongsberg MP8300 PC Test Report: MS Testing, TL13130-ENV, Kongsberg MP8300 PC Test Report: MS Testing, TL1672-EMC Issue 3, HP A3600 series, dated Test Report: MS Testing, TL1672-ENV Issue 3, HP A3600 series, dated Test Report: MS Testing, TL1673-EMC Issue 3, HP A3600 series and Fibre transmitter, dated Test Report: MS Testing, TL1673-ENV Issue 3, HP A3600 series and Fibre transmitter, dated Test Report: NEMKO no (IP22 test of COP-05 units: ALC, BU-NAV, Utility) Test Report: NEMKO no. E (Order no ), (EMC, cjoy-ot) Test Report: NEMKO no. E (EMC and environmental tests for AT-FS716L Ethernet switch) Test Report: Nemko no. E (K-Master Panel System) Test Report: Nemko no. E (K-Master Bridge Chair) Test Report: NEMKO Order no Rev 1.0 (Additional test cwing, cjoy, cpos) Test Report: TI Rev.- (K-Master Pilot Chair). Doc. No /A Test Report: TI Rev.- (KMX Pedestall 300). Doc. No /A Test Report: TI Rev.- (KMX Medium-800 Console). Doc. No /A Test Report: TI Rev. -, Test of KM-05 Operator Station Test Report: TI Rev. - (Additional test cwing, cjoy, cpos) Test Report: TI Rev. -, Environmental, Re-Temperature Test of cjoy Test Report: TI Rev.- (Vibration test of K-Master Chair) Test Report: TI Rev. A (FS120/NDU/NDU Mini) (Cabinet for cc-1) Test Report: TI Rev. A (cwing and cjoy) Test Report: TI Rev. - (cpos) Type Approval Hardware List, HW-Components. Doc. No /L Form No.: MED.Ba Issue: April 2010 Page 6 of 7
7 APPENDIX REV. NO. 4 (PAGE 5 OF 5) Type Examination documentation continues Update Notes for DP Basis Doc. No /A Update Notes for DP Basis Doc. No /A Update Notes for DP Basis Doc. No /A Update Notes for DP Basis Doc. No /A Update Notes for DP Basis Doc. No /A Update Notes for K-Master Basis Doc. No /A Place and date HØVIK, Jan Tore Grimsrud Surveyor END OF CERTIFICATE Form No.: MED.Ba Issue: April 2010 Page 7 of 7
EC-TYPE EXAMINATION CERTIFICATE (MODULE B)
EC-TYPE EXAMINATION CERTIFICATE (MODULE B) Certificate No: MEDB000008G Revision No: 3 Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED), issued as "Forskrift om Skipsutstyr"
More informationThis is to certify: Application : Certificate No: TAA00000FJ. That the Miscellaneous. with type designation(s) K-Bridge and K-Nav system platforms
Certificate : TAA00000FJ This is to certify: That the Miscellaneous with type designation(s) K-Bridge and K-Nav system platforms Issued to Kongsberg Maritime AS KONGSBERG, rway is found to comply with
More informationEC-TYPE EXAMINATION CERTIFICATE (MODULE B)
EC-TYPE EXAMINATION CERTIFICATE (MODULE B) Certificate No: MEDB000025U Revision No: 1 Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED), issued as "Forskrift om Skipsutstyr"
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: A-14136 File No: 899.60 Job Id: 262.1-018818-1 This is to certify: That the Peripheral Equipment with type designation(s) Ha-VIS econ 2000 series, econ 3000 series
More informationHistory. The world s first commercial. ARPA system. BridgeLine-2000 DataBridge-2. BridgeLine-10. K-Bridge. KONGSBERG July 27, 2008
History The world s first commercial 21 ARPA system 1969 1975 1980 1991 1999 2005 KONGSBERG July 27, 2008 K-Bridge BridgeLine-10 BridgeLine-2000 DataBridge-7 DataBridge-4 DataBridge-2 K-Bridge 2005 22
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-13902 File No: 823.60 Job Id: 262.1-003417-8 This is to certify: That the Motor Starter with type designation(s) GV2-ME, GV2-P and GV2-L Issued to Schneider
More informationTechnical Information
Subject Equipment for the Singapore flag vessels To whom it may concern Technical Information No. TEC-1045 Date 28 August 2015 Regarding the requirement for equipment installed Singapore registered ships
More informationTYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. S-6397 Holder of Certificate BREVINI POWER TRANSMISSION S.p.A. REGGIO EMILIA RE, Italy This is to certify that the Gears with type designation(s)
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-12943 File No: 822.21 Job Id: 262.1-004066-3 This is to certify: That the Frequency Converter with type designation(s) FC30X series, Issued to Danfoss Drives
More informationNavis NavDP 4000 Series
Navis NavDP 4000 Series DYNAMIC POSITIONING SYSTEM Navis NavDP 4000 Series THE PROFESSIONAL S CHOICE Navis Engineering OY is one of the few world experts in dynamic positioning. Having supplied DP systems
More informationDET NORSKE VERITAS TYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. D-3744 This Certificate consists of 4 pages. This is to certify that the Marine Riser Equipment with type designation(s) Manual Running Tool
More informationKongsberg Maritime Simulation and Training. The power to excel in Dynamic Positioning training
Kongsberg Maritime Simulation and Training The power to excel in Dynamic Positioning training The rapidly expanding offshore fleet and move into deeper waters has created strong demand for Dynamic Positioning
More informationEU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE
EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE Certificate No: MRA0000017 This Certificate is issued to ABB Automation Products GmbH Heidelberg, Germany for Computers and Programmable Logic Controllers
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP000018Z Revision No: 1 This is to certify: That the Ballast Water Management System with type designation(s) PureBallast 3.2, PureBallast 3.2 Compact Flex Issued
More informationTYPE APPROVAL CERTIFICATE
Page 1 / 9 File number: AP 63 Product code: 2592I This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com Requirements: Bureau Veritas Rules
More informationEvaluation Certificate
SC0414-14 Certificate for a part of a measuring system for LOTW Forecourt controller, FuelNet Manager Issued to CODAB AB Höjdrodergatan 24, SE-212 39 Malmö, Sweden In respect of (part of instrument) Forecourt
More informationApproval Engineer: Nina Thorvaldsen Moberg Inger-Helene Hals Head of Section
Certificate No: S-8431 File No: 911.53 Job Id: 262.1-018623-1 This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) 50T to 320T Bow Shackle
More informationN-03 STEERING GEAR CONTROL SYSTEMS
Guideline No.: N-03(201510) N-03 STEERING GEAR CONTROL SYSTEMS Issued date: October 20,2015 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements,
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) 2SN, 4SP, 4SH Issued to TEKNO HOSE
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAE000008C Revision No: 2 This is to certify: That the Frequency Converter with type designation(s) FC-302 series, Issued to Danfoss Drives A/S GRAASTEN, Denmark is found to comply with
More informationMarine product guide. Engines and generator sets
Marine product guide Engines and generator sets Marine product guide Engines and generator sets Contents Introduction 2 Rating definitions 4 Fuel consumption method 6 Engine model name explanation 7 Propulsion
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-14027 File No: 822.21 Job Id: 262.1-010767-3 This is to certify: That the Frequency Converter with type designation(s) NXA, NXB, NXI, NXN & NXP Issued to Vacon
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAA000014K Revision No: 1 This is to certify: That the Peripheral Equipment with type designation(s) JUMO AQUIS touch P (202580), JUMO DICON touch (703571) Issued to JUMO GmbH & Co. KG
More informationHow to get started. with. Kongsberg XP Auto systems. Serial number: Please Read This First
How to get started with Kongsberg XP Auto systems Serial number: Please Read This First Note We remind you that only the Esko staff, or persons having received appropriate training, are allowed to handle,
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAE000010D This is to certify: That the Frequency Converter with type designation(s) ACS800LC Issued to ABB Oy, Drives, is found to comply with DNV GL rules for
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAE000008A Revision No: 2 This is to certify: That the Frequency Converter with type designation(s) FC102 series, Issued to Danfoss Drives A/S GRAASTEN, Denmark is found to comply with
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: P-15161 File No: 791.70 Job Id: 262.1-008998-2 This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type
More informationEC Type-Approval Certificate UK 2655 Revision 2
UK 2655 V(0)a EC Type-Approval Certificate UK 2655 Revision 2 Issued by: National Measurement Office Notified Body Number 0126 In accordance with the requirements of the Non-automatic Weighing Instruments
More informationApproved for use as fixed fire extinguishing system for machinery spaces and cargo pump rooms.
Certificate No: TAF00000D7 This is to certify: That the Waterbased Fixed Fire Extinguishing System with type designation(s) VID Fire-Kill K6 Pacific Fine Water Spray (ceiling), VID Fire-Kill K6 North Sea
More informationChain-saws (combustion engine powered)
Compliance Guide Rev.4.2, Edition 04/2018 Chain-saws (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 206 68 66 This
More informationMarine product guide. Engines and generator sets
Marine product guide Engines and generator sets Marine product guide Engines and generator sets Contents Introduction 2 Rating definitions 4 Fuel consumption method 6 Engine model name explanation 7 Propulsion
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAS00000K9 This is to certify: That the Chain, shackles, swivels, sockets with type designation(s) Wide Body Shackles Issued to Crosby Group LLC Tulsa OK, United
More informationDNVGL-CP-0110 Edition March 2016
CLASS PROGRAMME Type approval DNVGL-CP-0110 Edition March 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationIMO fuel oil consumption data collection system
No. Subject: IMO fuel oil consumption data collection system IMO fuel oil consumption data collection system A similar scheme to EU MRV has also been adopted by IMO; according to Regulation 22A of MARPOL
More information1883 B INFORMATION. CERTIFICATES FOR LOW-FLAME SPREAD CHARACTERISTICS (type approvals) a ten sheet issue August 2006 revision of July 2006
a ten sheet issue revision of July 2006 1 x Sigma CM miocoat a Det Norske Veritas Product is found to comply with the (SigmaCover 435) b 04-05-2004, MED-B-2326 requirements in the following 100 µm c 04-05-2009
More informationEC Type-Approval Certificate UK2853 Revision 4
UK 2853 V(0)a EC Type-Approval Certificate UK2853 Revision 4 issued by: The National Measurement Office Notified Body Number 0126 In accordance with the requirements of the Non-automatic Weighing Instruments
More informationST. VINCENT AND THE GRENADINES
ST. VINCENT AND THE GRENADINES MARITIME ADMINISTRATION CIRCULAR N POL 022 FUEL OIL CONSUMPTION DATA COLLECTION SYSTEM Amendments to MARPOL Annex VI, MEPC.278(70) TO: APPLICABLE TO: EFFECTIVE AS FROM: SHIPOWNERS,
More informationThe Council Directive 2009/23/EC on non-automatic weighing instruments.
EC type-approval certificate Page 1 of 5 Issued by In accordance with Manufacturer In respect of Characteristics NMi Certin B.V. Hugo de Grootplein 1 3314 EG Dordrecht The Netherlands The Council Directive
More informationE/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1
30 August 2011 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for
More informationTYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. P-13583 This is to certify that the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) Alfagomma:
More informationOIML CERTIFICATE OF CONFORMITY
Member State of OIML United Kingdom of Great Britain and Northern Ireland OIML CERTIFICATE OF CONFORMITY Issuing authority: Person responsible: Applicant: Manufacturer: Identification of the certified
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: K-6282 File No: 334. Job Id: 262.1-019560-1 This is to certify: That the Structural Cementitious Grout with type designation(s) MasterFlow 9500 Issued to BASF
More informationRESOLUTION MEPC.278(70) (Adopted on 28 October 2016) AMENDMENTS TO THE ANNEX OF THE PROTOCOL OF 1997 TO AMEND THE INTERNATIONAL CONVENTION FOR THE
RESOLUTION MEPC.278(70) (Adopted on 28 October 2016) AMENDMENTS TO THE ANNEX OF THE PROTOCOL OF 1997 TO AMEND THE INTERNATIONAL CONVENTION FOR THE PREVENTION OF POLLUTION FROM SHIPS, 1973, AS MODIFIED
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA000016D This is to certify: That the Governor Control System with type designation(s) PRIAMOS I/II/III for Multi-Engine Propulsion or Gen-Set Applications Issued
More informationANNEX 3. RESOLUTION MEPC.278(70) (Adopted on 28 October 2016)
Annex 3, page 1 ANNEX 3 RESOLUTION MEPC.278(70) (Adopted on 28 October 2016) AMENDMENTS TO THE ANNEX OF THE PROTOCOL OF 1997 TO AMEND THE INTERNATIONAL CONVENTION FOR THE PREVENTION OF POLLUTION FROM SHIPS,
More informationThis is to certify: Application : Certificate No: TAS000011V Revision No: 1. That the Lifting set for Offshore containers and Portable Offshore Units
Certificate No: TAS000011V Revision No: 1 This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) Green Pin Standard and Green Pin Polar shackles
More informationHydrography Integrated Systems and Platforms
Kongsberg Maritime Subsea Hydrography Integrated Systems and Platforms 15 th MACHC Meeting, Manzanillo, Mexico, 11 th to 13 th December 2014. Jan Haug Kristensen Regional Manager Americas Subsea Sales
More informationTillers Motor hoes (combustion engine powered)
Compliance Guide Rev.2.1, Edition 04/2018 This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine powered brush-cutters and grass trimmers in
More informationCREATING PROGRESS. General sales specification. Triton-SG. Steering Gear System. Scana Mar-El AS
CREATING PROGRESS Steering Gear System Scana Mar-El AS Ownership All information, including drawings, pictures etc., contained in this document is the sole property of Scana Mar-El AS. It must not be copied
More informationDET NORSKE VERITAS TYPE APPROVAL CERTIFICATE
Page 1 of 5 DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-9389 This Certificate consists of 5 pages This is to certify that the Motor Starter 823.60 with type designation(s) Altistart
More informationHedge trimmers (combustion engine powered)
Compliance Guide Rev.2.1 Edition 04/2018 Hedge trimmers (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 706 82 37 This
More informationReport No.: Name of Ship: Plans referred during Initial Survey:
Report on the Surveys Concerning International Oil Pollution Prevention Certificate Part 7 Survey of installation for discharges from cargo spaces Initial/ Annual/ Intermediate/ Renewal/ Change of Flag
More informationCertificate of EC type-approval of a measuring instrument Number: UK 2489 Revision 4
(UK 2489) V(0)a United Kingdom of Great Britain and Northern Ireland Certificate of EC type-approval of a measuring instrument Number: UK 2489 Revision 4 issued by the Secretary of State for Business,
More informationDEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016
Trade and Industry, Department of/ Handel en Nywerheid, Departement van 438 National Regulator for Compulsory Specifications Act (5/2008): Amendments to the Compulsory Specification for Earth Leakage Protection
More informationParts Certificate Certificate for a part of a measuring system for LOTW
No. 107030 Wayne ixpay TX secure payment platform, a payment terminal (OPT) for cards Issued to Wayne Fueling Systems Sweden AB Hanögatan 10, SE-211 24 Malmö, Sweden In respect of (part of instrument)
More informationThis is to certify: Application : Certificate No: TAS000011V. That the Lifting set for Offshore containers and Portable Offshore Units
Certificate No: TAS000011V This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) Green Pin Standard and Green Pin Polar shackles Issued to
More informationEUROPEAN UNION AGENCY FOR RAILWAYS Annex 1 006REC1025 V 1.0
Annex 1: Amendments to the technical specification for interoperability relating to the rolling stock locomotives and passenger rolling stock subsystem of the rail system in the European Union (Annex to
More informationREDUNDANT PROPULSION SHIPS RULES FOR CLASSIFICATION OF NEWBUILDINGS DET NORSKE VERITAS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2
RULES FOR CLASSIFICATION OF SHIPS NEWBUILDINGS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2 REDUNDANT PROPULSION JANUARY 2003 This booklet includes the relevant amendments and corrections
More informationInformation Notice (rev3) DEPARTMENT OF MARINE SERVICES AND MERCHANT SHIPPING (ADOMS) Ballast Water Management
Information Notice 2016-003 (rev3) DEPARTMENT OF MARINE SERVICES AND MERCHANT SHIPPING (ADOMS) Ballast Water Management 1. Introduction This Information Notice is to draw attention to all involved parties
More informationRide-on lawnmowers (combustion engine powered)
Compliance Guide Rev.2.3 Edition 04/2018 Ride-on lawnmowers (combustion engine powered) This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine
More informationLNG: Legal and regulatory framework. Canepa Monica World Maritime University
LNG: Legal and regulatory framework Canepa Monica World Maritime University Source: Verisk Maplecroft AIR QUALITY INDEX 2017 Policies and legal instruments for clean energy to support LNG GLOBAL REGIONAL
More informationEU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL
This document contains an EU proposal for a legal text on an annex on motor vehicles and equipment and parts thereof to the Trade in Goods chapter in the Trade Part of a possible modernised EU-Mexico Association
More informationNAVITRON SYSTEMS LTD NT921 MKII SMALL VESSEL AUTOPILOT
NAVITRON SYSTEMS LTD NT92 MKII SMALL VESSEL AUTOPILOT Specifically designed for small professional vessel use (typically -20m LOA) the NT92 MKII Autopilot provides a powerful combination of steering system
More informationTYPE APPROVAL CERTIFICATE
Page 1 / 5 File number: AP4599 Product code: 2592I This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com Requirements: Bureau Veritas Rules
More informationToughPIX 2300XP Series INSTRUCTIONS FOR SAFE OPERATION
ToughPIX 2300XP Series INSTRUCTIONS FOR SAFE OPERATION II 2 G I M2 Ref. ID 2310, Rev. A Email: sales@cord-ex.com www.cordexinstruments.com CONTENTS 1. READ THIS FIRST 1. READ THIS FIRST 1 Liability 1 Trademark
More informationCATALOG. ABB micro drives ACS55, 0.18 to 2.2 kw
CATALOG ABB micro drives ACS55, 0.18 to 2.2 kw 2 ABB MICRO DRIVES, ACS55, 0.18 TO 2.2 KW/0.25 TO 3 HP Ease of integration. ACS55 drives. 3 Table of contents 004 ABB micro drives, ACS55 005 Easily integrated
More informationGuideline No.: E-03(201610) E-03 MOTORS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-03(201610) E-03 MOTORS Issued date: October 28,2016 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains technical requirements, inspection and
More informationSilvertel. Ag Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W peak output power
Silvertel V.3 April 207 Datasheet Pb Features IEEE802.3at and IEEE802.3af compliant Maximum 30W peak output power Small Single In-Line (SIL) package size 57.3mm (L) x 4mm (H) Overload, short-circuit and
More informationTOPAS 2130A (Draft v3)
TOPAS 2130A (Draft v3) Revision Date Scope Authorised by A (v1) 10/10/17 Draft A (v2) 11/11/17 Draft A (v3) 15/12/17 Draft Traffic Open Products And Specifications Limited 2017. This document is the property
More informationCompact Heat Meters. Features. -A Pulsed output. -B M-Bus output. Accessories. UK Sales Tel: International Tel:
Compact Heat Meters Features Compact design Simple operation Pulsed output Measures heating or cooling Specification Product Codes Water Meter Temp. range 10 to 90 C Nominal pressure 16bar Installation
More informationSteel Spline Joint Bulkheads Junction: B-0 Class FIPRO MS 16 mm steel spline No x3 mm Construction: free-standing Sound reduction: 29 db (estima
Bulkheads 1.1 Steel Spline Joint 1.2 OMEGA-Profile Joints 1.3 Details of Corners, T-Corners, Top and Bottom Connections 2.1 Double Shell Partitions 2.2 Details of Double Shell Corner, T-Corner, Top and
More informationThree-phase motors for marine use
Three-phase motors for marine use Contents Product description 11/2 Overview of technical data 11/7 Series K.../W4.. for Premium Efficiency IE3 11/8 Series K.../WE.. for High Efficiency IE2 11/12 Series
More informationREDUNDANT PROPULSION SHIPS RULES FOR CLASSIFICATION OF NEWBUILDINGS DET NORSKE VERITAS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2
RULES FOR CLASSIFICATION OF SHIPS NEWBUILDINGS SPECIAL EQUIPMENT AND SYSTEMS ADDITIONAL CLASS PART 6 CHAPTER 2 REDUNDANT PROPULSION JANUARY 2011 CONTENTS PAGE Sec. 1 General Requirements... 4 Sec. 2 System
More informationBLU SERIES Battery Load Units
BLU SERIES Battery Load Units Lightweight starting from 12,3 kg (27 lbs) Powerful discharge power of up to 28,8 kw Voltage measurement range: up to 480 V DC Discharge current up to 340 A DC Easily expandable
More informationGuideline No.: E-07(201712) E-07 TRANSFORMERS. Issued date: December 26, China Classification Society
Guideline No.: E-07(201712) E-07 TRANSFORMERS Issued date: December 26, 2017 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection
More informationKYSTDESIGN SUPPORTER Work Class ROV
KYSTDESIGN SUPPORTER Work Class ROV Heavy duty work class ROV 150 Hp HPU 3000 m depth rated Through frame lift capacity of 3 t Top hat TMS with 500 m tether capacity Interface prepared for advanced survey
More informationST. VINCENT AND THE GRENADINES
ST. VINCENT AND THE GRENADINES MARITIME ADMINISTRATION CIRCULAR N AFS 001 Rev.1 International Convention on the Control of Harmful Anti-fouling Systems on Ship Issuance of Statement of Compliance TO: APPLICABLE
More informationInstallation Instructions
Installation Instructions (Cat. No. 1794-ASB Series B) 1 9 2 3 4, 5 6 7 8 Component Identification 1 Remote I/O Adapter module 2 Indicators 3 Communication reset pushbutton (PRL) 4 Access door to switches
More informationEU RO Mutual Recognition Technical Requirements
1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 6 4. MARKING REQUIREMENTS... 6 5. TYPE APPROVAL CERTIFICATE CONTENT... 7 6. APPROVAL DATE AND REVISION NUMBER... 7 7.
More informationReference: C.N TREATIES-2 (Depositary Notification) DRAFT RULE NO. 1
(XI.B.31) Reference: C.N.532.2001.TREATIES-2 (Depositary Notification) AGREEMENT CONCERNING THE ADOPTION OF UNIFORM CONDITIONS FOR PERIODICAL TECHNICAL INSPECTIONS OF WHEELED VEHICLES AND THE RECIPROCAL
More informationAIR LUBRICATION SYSTEM INSTALLATION
Guide for Air Lubrication System Installation GUIDE FOR AIR LUBRICATION SYSTEM INSTALLATION OCTOBER 2018 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 2018
More informationRESOLUTION MEPC.181(59) Adopted on 17 July GUIDELINES FOR PORT STATE CONTROL UNDER THE REVISED MARPOL ANNEX VI
MEPC 59/24/Add.1 RESOLUTION MEPC.181(59) THE MARINE ENVIRONMENT PROTECTION COMMITTEE, RECALLING Article 38(a) of the Convention on the International Maritime Organization concerning the functions of the
More informationPJC321, PJC322 PJC321-L, PJC322-L PJC321-MCL2, PJC322-MCL2 S-link Control Panel
SIDE-POWER Thruster Systems PJC321, PJC322 PJC321-L, PJC322-L PJC321-MCL2, PJC322-MCL2 S-link Control Panel Keep this manual onboard! EN Installation and user s manual SLEIPNER MOTOR AS P.O. Box 519 N-1612
More informationHISTORICAL DEVELOPMENT OF DYNAMIC POSITIONING
Historical developement of DP HISTORICAL DEVELOPMENT OF DYNAMIC POSITIONING Background Petroleum products play an important part in our modern civilisation, but even in Noah s time, tar was used to stop
More informationNOTE Please read this Operating Manual carefully before first using the device and strictly adhere to the instructions!
Rev. 1.8 Operating Manual for Pressure Sensors 97PA-21x-xxx page 1 of 6 Operating Manual Pressure Sensors Article numbers: 97PA-21G-10 97PA-21G-50 97PA-21Y-5 97PA-21Y-25 97PA-21Y-160 97PA-21Y-400 NOTE
More informationSerbia. Website Ministry of Construction, Transport and Infrastructure. Contact points Flag State
EU Candidate country Serbia Website Ministry of Construction, Transport and Infrastructure Contact points Flag State Port State Coastal State Marine Accidents Investigations www.mgsi.gov.rs Mr. Veljko
More informationTCM-2 Thyristor DATA Control SHEETModule DATA SHEET. TCM-2 Thyristor Control Module
Insulation monitor, SIM-Q/SIM-Q LF TCM-2 Thyristor Control Module TCM-2 Thyristor DATA Control SHEETModule DATA SHEET Wind sensor type WSS and WSS-L Static sensor High resolution Approvals Robust design
More informationMARINE. Drives and motors for electrically driven deck machinery and offshore winches
MARINE Drives and motors for electrically driven deck machinery and offshore winches 2 MARINE BROCHURE Performance. Speed. Reliability. Safety. Everything counts. With the help of application expertise
More informationANNEX 8 RESOLUTION MEPC.102(48) Adopted on 11 October 2002 GUIDELINES FOR SURVEY AND CERTIFICATION OF ANTI-FOULING SYSTEMS ON SHIPS
RESOLUTION MEPC.102(48) Adopted on 11 October 2002 GUIDELINES FOR SURVEY AND CERTIFICATION OF ANTI-FOULING SYSTEMS ON SHIPS THE MARINE ENVIRONMENT PROTECTION COMMITTEE, RECALLING Article 38(a) of the Convention
More informationJUMO dtrans p20. Process pressure transmitter. Brief description. Special features. Block diagram. Approvals/approval marks (see "Technical data")
Page 1/15 JUMO dtrans p20 Process pressure transmitter Brief description The device with the HART interface combines maximum precision with simple operation. It is used to measure the system pressure of
More informationANNEX MOTOR VEHICLES AND EQUIPMENT AND PARTS THEREOF. Article 1. Definitions
ANNEX MOTOR VEHICLES AND EQUIPMENT AND PARTS THEREOF Article 1 Definitions 1. For the purpose of this Annex, the following definitions apply: (a) WP.29 means the World Forum for Harmonisation of Vehicle
More information(Text with EEA relevance)
L 150/10 COMMISSION REGULATION (EU) 2015/924 of 8 June 2015 amending Regulation (EU) No 321/2013 concerning the technical specification for interoperability relating to the rolling stock freight wagons
More informationEnglish version of. Executive Order on vehicles' technical compatibility with the rail network (Bekendtgørelse nr af 30. november 2012) Preface
English version of Executive Order on vehicles' technical compatibility with the rail network (Bekendtgørelse nr. 1127 af 30. november 2012) Preface Please note that the English version is for informational
More informationTYPE APPROVAL CERTIFICATE
DET NORSKE VERITAS TYPE APPROVAL CERTIFICATE CERTIFICATE NO. E-13344 This is to certify that the Terminal Block with type designation(s) MBKKB, MT, MTTB, UK, UKKB, ZFK;MBK, UHSK, UKH, UK, PIK, UKKB, UKK,
More informationIntegrated Solutions for LNG operations. Kongsberg Maritime
Integrated Solutions for LNG operations Kongsberg Maritime International high-tech solutions, from deep sea to outer space Advanced solutions and applications for the maritime, oil & gas, defence and space
More informationUpdate notice. General safety. Type code key. Update notice 1
Update notice 1 Update notice The notice concerns the ACS880-01 hardware manuals listed below. Contents of the notice: New drive s 442A-3 and 441A-5, changed ar fuses, added minimum switching frequency
More informationLOW VOLTAGE WIND CONVERTERS. ABB wind turbine converters ACS880, 800 kw to 8 MW
LOW VOLTAGE WIND CONVERTERS ABB wind turbine converters ACS880, 800 kw to 8 MW 2 ABB WIND CONVERTERS, ACS880 WIND TURBINE CONVERTERS ACS880 wind turbine converter Flexible solution The ACS880 converter
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TE00001J9 This is to certify: That the Frequency Converter with type designation(s) NXS Issued to Vacon Ltd VS, Finland is found to comply with DNV GL rules for classification Ships, offshore
More informationRule No. 1. Scope Definitions Periodicity of technical inspections Technical inspection Inspection requirements...
Submitted by the Co-Chairs of the IWG on PTI Informal document WP.29-171-21 171 st WP.29, 14-17 March 2017, Agenda item 7.3) PROPOSALS FOR NEW RULE ON PERIODICAL TECHNICAL INSPECTIONS OF MOTOR VEHICLES
More informationGUIDELINES FOR PORT STATE CONTROL UNDER MARPOL ANNEX VI
INTERNATIONAL MARITIME ORGANIZATION 4 ALBERT EMBANKMENT LONDON SE1 7SR Telephone: 020 7587 3152 Fax: 020 7587 3210 IMO E Ref. T5/1.08 MEPC/Circ.472 29 July 2005 GUIDELINES FOR PORT STATE CONTROL UNDER
More information