A R E A & S I T E WA L L M O U N T E D B O L L A R D S T E C H N I C A L S P E C I F I C AT I O N S

Size: px

Start display at page:

Download "A R E A & S I T E WA L L M O U N T E D B O L L A R D S T E C H N I C A L S P E C I F I C AT I O N S"

Laureen Warner
6 years ago
Views:

1 A R E A & S I T E WA L L M O U N T E D B O L L A R D S T E C H N I C A L S P E C I F I C AT I O N S

H OW TO SPECI FY Choose the boldface catalog nomenclature that best suits your needs.

Canadian Standards IP5 Rated US and Canadian Patents Pending NOM Certified For detailed technical specifications and complete ordering information, please visit www.lithonia.

MRT 7 OH MRP OH 10 08 5 0 5 77 37 80 5 TB TBV 7 MVOLT 8 MR MRT1 MRT MRP V O LTA G E 5 M O U N T I N G Houseside Shield (H S) Internal houseside shield attaches to, and rotates with, reflector

2 H OW TO SPECI FY Choose the boldface catalog nomenclature that best suits your needs W AT TA G E D I STR I B UTI O N S V O LTA G E M O U NTI N G O PTI O N S F I N I S H E X A M P L E: MR1 175M SR 10 SPA SF DNA LPI CERTIFICATIONS Wet Location Listed and Labeled to US and Canadian Standards IP5 Rated US and Canadian Patents Pending NOM Certified For detailed technical specifications and complete ordering information, please visit AREA & SITE 1 MR MR1 Length.5 Diameter 18.5 Height.375 Weight 7 lbs. MRT 7 OH MRP OH TB TBV 7 MVOLT 8 MR MRT1 MRT MRP V O LTA G E 5 M O U N T I N G Houseside Shield (H S) Internal houseside shield attaches to, and rotates with, reflector Houseside shield standard with the SRSC reflectors O R D E R I N G E X A M P L E : M R 1 175M S R 1 0 S PA S F D N A L P I Length Diameter 5 Height 8.5 Weight lbs. Length.5 Diameter 18.5 Height.375 Weight 7 lbs. Overall Height 18.5 Length Diameter 5 Height 8.5 Weight lbs. Overall Height 3.5 Diameter 18 Height 5.5 Weight 35 lbs. Overall Height 3 ARM Mounts to pole or wall plate using a unique block/receiver assembly: The block bolts to a pole or wall plate and engages the receiver within the Omero Area integral arm A single threaded locking fastener secures the luminaire to the receiver Assembly is rated to support 00 lb. load SPA Square Pole Mounting (STANDARD) RPA Round Pole Mounting WBA Wall Bracket Mounting POST TOP Mounts to round pole utilizing a expansion fitter Vandal Guard (VG) Low profile UV stabilized polycarbonate sculptured lens seals to doorframe to prevent intrusion and lens damage Slipfitters Tenon slipfitters for arm mount fixtures are available with MR fixtures and can be ordered with the Round Pole Mounting kit (RPA) W AT TA G E / S O U R C E M R 1 / M R T 1 METAL HALIDE HIGH PRESSURE SODIUM 50M 1 35S 70M 1 150M 175M 1 M R / M R T METAL HALIDE HIGH PRESSURE SODIUM 00M 00S 50M 30M 1 00S 350M 3,1 00M 3 M R P METAL HALIDE 70M 1 150M 175M SF DF GLR PER CR QRS HS EC SCWA LPI L/LP NOM 8 PE3 PE PE7 SC O P T I O N S FLUORESCENT /3TRT TRT /TRT 57TRT 70TRT INDUCTION 100W (Icetron) INDUCTION 150W (Icetron) Shipped Installed 9, 10 Single Fuse (10, 77, 37V) Double Fuse (08, 0, 80V) 9,10 Internal Fast-blow Fusing 10 NEMA Twist-lock Receptacle Only (no photocontrol) Corrosion Resistant Finish Quartz Restrike System (max allowable lamp included) 9 Houseside Shield (SR, SR3) Emergency Circuit (max allowable lamp included) Super CWA Pulse Start Ballast Lamp Included Less Lamp NOM Certified Shipped Separately 11 NEMA Twist-lock PE (37V) NEMA Twist-lock PE (80V) NEMA Twist-lock PE (77V) Shorting Cap for PER option F I N I S H STANDARD DDB Dark Bronze HIGH PRESSURE SODIUM 1 OPTIONAL DNA Natural Aluminum DWH White DBL Black DMB Bronze FLUORESCENT /3TRT TRT 57TRT /TRT 70TRT Over 00 RAL colors available TGIC polyester powder coating on die-cast aluminum housing TEXTURED DDBT Dark Bronze DNAT Natural Aluminum DWHG White DBLB Black DBNH Bronze Multi-stage process includes environmentally friendly chromate-free substrate Please refer to for optional catalogued colors or specify a four-digit RAL number. INDUCTION 100W (Icetron)

3 3

4 TECHNICAL SPECIFICATIONS 3 D I S T R I B U T I O N S P O W E R T R A Y SR SR3 Segmented Type II Roadway Segmented Type III Asymmetric All electrical components are mounted to a single rigid metal tray that may be quickly detached by removing two screws. Ballasts: Copper wound using the highest grade grain oriented steel laminations SRSC Segmented Type IV Forward Throw, Sharp Backlight Cutoff P O L E P AT T E R N S When ordering with Lithonia Lighting poles, the specific Omero Area drilling pattern must be specified. SRW Segmented Type IV Wide, Forward Throw (MR & MRT Only) Drilling Patterns 1 90 o Omero MR1 & MR DM19AS Omero Suspend MRT1 DM19MRT1 Omero Suspend MRT DM19MRT 180 o DM8AS DM8MRT1 DM8MRT 90 o DM9AS DM9MRT1 DM9MRT SR5S Segmented Type V Square 3 90 o 3 10 o (round poles only) DM39AS DM3AS DM39MRT1 DM3MRT1 DM39MRT DM3MRT R E F L E C T O R S 90 o DM9AS Pole Example: SSA 0 C DM19AS DDB DM9MRT1 DM9MRT Constructed of 95% reflective anodized aluminum sheet Secured into a one-piece deep drawn chassis to ensure precise alignment Removable, replaceable and rotatable in 90 increments without the use of tools Sockets are factory wired with modular plugs for quick connection to ballast MR1 and MRP reflectors include: Medium-base porcelain sockets pulse rated for High Pressure Sodium or Metal Halide MR reflectors include: Mogul-base porcelain sockets rated for KV for High Pressure Sodium, and position oriented mogul base porcelain sockets for Metal Halide N O T E S 1 Not available with 80V 10V only 3 Must use reduced jacket lamp ED8 Dual lamps available with SR3 optic only 5 Consult factory for availability in Canada Optional multi-tap ballast (10, 08, 0, 77V; in Canada 10, 77, 37V) 7 Optional penta-tap ballast (10, 08, 0, 77, 80V; not available in Canada); 175W metal halide only 8 Optional multi-volt electronic ballast (for TRT lamps) capable of operating on any line voltage from 10 77V 9 SF, DF or QRS options cannot be ordered together 10 Must specify voltage 11 May be ordered as an accessory 1 Must use SCWA BOLLARD 1 MRBX Standard Height Nominal Diameter 8 SYM O R D E R I N G E X A M P L E : M R B X 3TRT A SY 10 E L D W C H3 L P I METAL HALIDE 50M 70M STANDARD Type V Distribution W AT TA G E / S O U R C E HIGH PRESSURE SODIUM 35S 3 R E F L E C T O R V O LTA G E ELDWC TB MVOLT H H30 FLUORESCENT 13DTT TRT 3TRT INCANDESCENT I (100W Max) 5 O P T I O N S Shipped Installed Cold Weather Battery Pack Overall Height 30 Overall Height Nighttime Friendly designates products with superior optical control that are consistent with the goals of USGBC LEED and meet Green Globes product criteria for light pollution reduction. These products are full cutoff and no more than 10% of the lumens from the luminaire are emitted above 80 degrees from nadir. ASY OPTIONAL Asymmetric Distribution H3 HS LPI 3 Overall Height Half-shield Lamp Included L/LP Less Lamp

5 H OW TO SPECI FY Choose the boldface catalog nomenclature that best suits your needs W AT TA G E D I STR I B UTI O N S V O LTA G E O PTI O N S F I N I S H E X A M P L E: MRW 175M FT 77 SF DNAT LPI CERTIFICATIONS UL listed for wet locations (damp location listed in lens up orientation) WLU option offers wet location listing in lens down orientation (see options) NOM Certified Listed and labeled to Canadian standards IP5 Rated For detailed technical specifications and complete ordering information, please visit WALL MOUNTED MRW O P T I O N S W AT TA G E / S O U R C E 1 3 Length 18 Width 9 Height 7.5 Weight 35 lbs METAL HALIDE 50M 70M 150M 175M HIGH PRESSURE SODIUM 35S 1 1 FLUORESCENT DTT /DTT TRT /TRT 3TRT /3TRT TRT /TRT D I S T R I B U T I O N S FT MD WT Forward Throw Medium Throw (coated lamp standard) Wide Throw 5 Shipped Installed Shipped Separately 7 SF Single Fuse (10, 77, 37V) 8 DF Double Fuse (08, 0, 80V) 8 GMF Internal Slow-blow Fusing 7,8 EC Emergency Circuit (max allowable lamp included) 9 QRS Quartz Restrike System (max allowable lamp included) 13 CR Enhanced Corrosion Resistance CRT Non-stick Protective Coating 1 PE Photoelectric Cell, Button Type (n/a TB, TBV or MVOLT) 15 DC1 Emergency Circuit 1 Volt (35W lamp included standard) 10 DC1 Emergency Circuit 1 Volt (() 35W lamps included standard) 10 DC01 Emergency Circuit 1 Volt (0W lamp included standard) 10 DC01 Emergency Circuit 1 Volt (() 0W lamps included standard) 10 7, 11 ELDW Emergency Battery Pack (10V and 77V only) ELDWR Fixture wired ready for Bodine B30 remote 7, 1 battery pack (3 min. operating temp.) ELDWRPS Fixture wired ready for PS100 or PSDL3 7, 1 remote battery pack (3 min. operating temp.) WLU Wet Location Door for Lens Up Orientation IBS Internal Backlight Shield 1 DFL Diffusing Lens NOM NOM Certified LPI Lamp Included L/LP Less Lamp O R D E R I N G E X A M P L E : M R W 175M F T 77 S F D N AT L P I Surface Mounted Backbox 18 Wall box for surface conduit WSBBW mounting. Ideal for retrofit applications. Uptilt 5 Degrees 18 Cast wedge that allows the fixtureto tilt by 5 degrees to enhance optical control and performance. The UT5 works with either the standard mounting or WSBBW in lens down or lens up orientations. Wire Guard 15 Steel wire guard for added protection against lens damage. Painted finish to prevent rusting. Vandal Guard 15 UV-stabilized polycarbonate low profile sculptured lens that seals to doorframe to prevent lens damage. WSUT5 MRWWG MRWVG F I N I S H 17 V O LTA G E TB TBV 5 MVOLT STANDARD TEXTURED DDBT Dark Bronze Standard DSST Sandstone DNAT Natural Aluminum DWHG White DBLB Black OPTIONAL TEXTURED DBNH Bronze DSPD Dark Gray DSPJ Light Gray DSPE Green DSPG Dark Red DSPF Rust DSPH Red STRIPING SDDB Dark Bronze SDWH White SDBL Black SDNA Natural Aluminum SDTG Tennis Green SDBR Bright Red SDBUA Dark Blue SDGYM Gray SDYLB Yellow Standard colors are textured paint finishes TGIC polyester powder coating on painted parts Multi-stage process includes environmentally friendly chromate-free substrate Please refer to Architectural Colors brochure for optional catalogued colors or specify a four-digit RAL number. N O T E S 1 10V, NPF only Only available with MD distribution 3 Not available in Canada Optional multi-tap ballast (10V, 08V, 0V, 77V); In Canada 10V, 77V, 37V; ships as 10/37 5 Optional penta-tap ballast (10V, 08V, 0V, 77V, 80V; n/a in Canada). 175M only Optional multi-volt electronic ballast (for compact fluorescent lamps only) capable of operating on any line voltage from 10 77V 7 Available for compact fluorescent units only 8 Must specify voltage; not availble with MVOLT or TB 9 Not available with QRS 10 Not available with SF, DF or QRS 11 Not available with /3TRT or /TRT 1 Battery pack by others and mounted external to luminaire; Pilot light/ test switch mounting plate included (Consult factory for availability) 13 Not available with compact fluorescent 1 Black finish only 15 Must be ordered with fixture; no field modifications 1 IBS not available with MD distribution 17 Additional architectural colors available; see 18 Must specify finish Nighttime Friendly designates products with superior optical control that are consistent with the goals of USGBC LEED and meet Green Globes product criteria for light pollution reduction. These products are full cutoff and no more than 10% of the lumens from the luminaire are emitted above 80 degrees from nadir. 5

6 MR/MRT Area & Roadway MRP Post Top MRW Wall Mounted MRBX Bollards PROFILES IN ILLUMINATION USA: One Lithonia Way Conyers, GA 3001 TEL FAX Acuity Brands Lighting, Inc. 5/07 OP55 Form No

KAD250MR3TBSPD04 Wall Fixture

KAD250MR3TBSPD04 Wall Fixture 8 South Street 796-76, TX Nacogdoches Phone: 96-69-79 Fax: 96-6-68 AllenWatson@elliottelectric.com MRTBSPD Wall Fixture Catalog Number MRTBSPD Manufacturer Description Area Light, Metal Halide Lamp; Lamp