FULL CUTOFF DARK SKY COMPLIANT FIXTURES. commercial & architectural lighting
|
|
- Tracey Ramsey
- 6 years ago
- Views:
Transcription
1 FULL CUTOFF DARK SKY FIXTURES commercial & architectural lighting
2 WHAT IS LIGHT POLLUTION? Quite simply, light pollution is excessive or obtrusive artificial light. Around the world, the night sky is disappearing in a haze of artificial light. A side effect of an industrial civilization, it s sources include; building exterior and interior lighting, advertising, commercial properties, offices, factories, streetlights, and illuminated sporting venues. Light pollution is usually broken down into five main categories; Light Trespass - Unwanted light entering an adjacent property. Over-Illumination - The excessive and energy wasting use of light. Glare - Caused by high contrast between light and dark areas, glare can make it difficult for the human eye to adjust to the differences in brightness, sometimes causing unsafe road conditions. Light Clutter - Groupings of lights may generate confusion, distracting viewers from obstacles that they may be intended to illuminate. Sky Glow - The combination of reflected and badly directed light escaping into the night sky, usually seen over populated areas. ENVIRONMENTAL IMPACT Disruption of the natural patterns of light and dark can influence many aspects of animal behavior. Light pollution can confuse animal navigation, alter competitive instincts, change predator-prey relations, and influence animal physiology. Studies have shown that many species, from migrating birds to sea-turtle hatchlings, have shown a negative impact from excessive or poorly designed lighting. ENERGY CONSERVATION By using the correct fixture and a properly executed lighting design, lighting is used more efficiently, with less waste and less creation of unwanted or unneeded illumination. Non-Cutoff Fixture Full Cutoff Fixture Horizontal Plane Horizontal Plane Light bleed creates blinding glow over the city of Chicago, almost completely blotting out the night sky.
3 Photograph by NASA Composite satallite photography shows visible light from densely populated urban areas on virtually every continent. TRACE-LITE HAS THE SOLUTION Our extensive line of Dark Sky Compliant fixtures can save you energy while being environmentally friendly. When correctly installed, a Trace-lite full cutoff fixture eliminates light escaping above the plane of the horizontal, reducing light pollution and saving energy by only directing the light towards it s intended target. This often allows for lower wattage lamps to be used in fixtures, while still maintaining excellent spacing and uniformity. DESIGN SUPPORT Let us help with your design needs. Trace-lite s lighting design staff is ready to provide you with photometric data, sample layouts or complete site lighting analysis. PRODUCT INDEX WALL PACKS...4 TL8 Decorative Wall Pack...4 TL Small, Architectural Trapezoid Wall Pack...5 TLEX Medium, Architectural Trapezoid Wall Pack...6 TLEXT Large, Architectural Trapezoid Wall Pack...7 TLA Architectural Trapezoid w/optional Integral Em. Ballast...8 TL Architectural Half-Moon Wall Pack...9 TLA Architectural Half-Moon Wall Pack w/optional Integral Em. Ballast... TL Architectural Quarter-Sphere Wall Pack... TL Architectural Quarter-Round Wall Pack... TL Architectural Wedge Wall Pack w/optional Integral Em. Ballast...3 AREA LIGHTS...4 TL3 Medium Area Light...4 TL3 Small Area Light...5 TL33 Large Area Light...6 TL34 Large Area Light...7 TL35 Architectural Area Light...8 Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
4 TL8 DECORATIVE, FULL CUTOFF, WALL PACK The Trace-lite TL8 Series features a durable, diecast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. The TL8 features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a high-impact, heat resistant, tempered glass lens. The Trace-lite TL8 Series uses a medium base, glazed porcelain socket pulse rated for 4KV or universal 4 pin socket. The TL8 is provided with a high quality ballast, utilizing High Power Factor, Reactor or CWA type ballasts depending on lamp type and wattage. Available with V or Multitap (/8/4/77V) input (dependant on lamp type and wattage). An optional 48V ballast is also available for MH and HPS lamps from to 75 watts. The Trace-lite TL8 Series is available with Compact Fluorescent (6 to 84 watt), Metal Halide (7 to 75 watt) or High Pressure Sodium (7 to 5 watt) lamps to fit any application. The Trace-lite TL8 Series is ideal for mounting to any vertical surface, and features a hinged design for easy access to internal components. Can be wired to a 4 junction box, or surface mounted using / NPS conduit entry points. TL8-PL-6-/77 PL 6 /77 ELECTRONIC TL8-PL-5-/77 PL 6 x /77 ELECTRONIC TL8-PL-3-/77 PL 3 /77 ELECTRONIC TL8-PL-6-/77 PL 3 x /77 ELECTRONIC TL8-PL-4-/77 PL 4 /77 ELECTRONIC TL8-PL-84-/77 PL 4 x /77 ELECTRONIC TL8-HPS-7-MT HPS 7 /8/4/77 HX-HPF TL8-HPS--MT HPS /8/4/77 HX-HPF TL8-HPS-5-MT HPS 5 /8/4/77 HX-HPF TL8-MH-7-MT MH 7 /8/4/77 HX-HPF TL8-MH--MT MH /8/4/77 HX-HPF TL8-MH-5-MT MH 5 /8/4/77 HX-HPF TL8-MH-75-MT MH 75 /8/4/77 CWA 88% Efficient Ballast compliant with EISA 7 CATALOG # DESCRIPTION PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed PCFAC VAC Photocontrol - Factory Installed PCFAC 8-77 VAC Photocontol - Factory Installed Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH and HPS Ballasts up to 75W PG8 Polycarbonate Guard - Field Installed TL8-PSMH-5 Mounted at Approximate Weight: lbs.. fc 3 4 Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
5 TL ARCHITECTURAL TRAPEZOID, FULL CUTOFF, WALL PACK TL-PL-3-/77 PL 3 x /77 MAGNETIC TL-PL-6-/77 PL 6 /77 ELECTRONIC TL-PL-5-/77 PL 6 x /77 ELECTRONIC TL-PL-3-/77 PL 3 /77 ELECTRONIC TL-PL-64-/77 PL 3 x /77 ELECTRONIC TL-PL-4-/77 PL 4 /77 ELECTRONIC TL-PL-84-/77 PL 4 x /77 ELECTRONIC TL-MH-7-MT MH 7 /8/4/77 HX-HPF TL-MH--MT MH /8/4/77 HX-HPF TL-MH-5-MT MH 5 /8/4/77 HX-HPF TL-MH-75-MT MH 75 /8/4/77 CWA TL-HPS-35- HPS 35 REACTOR NPF TL-HPS-5- HPS 5 REACTOR NPF TL-HPS-7- HPS 7 REACTOR NPF TL-HPS-- HPS REACTOR NPF TL-HPS-5- HPS 5 REACTOR NPF TL-HPS-5-DT HPS 5 /77 HX-HPF TL-HPS-7-MT HPS 7 /8/4/77 HX-HPF TL-HPS--MT HPS /8/4/77 HX-HPF TL-HPS-5-MT HPS 5 /8/4/77 HX-HPF 88% Efficient Ballast compliant with EISA 7 CATALOG # DESCRIPTION PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed PCFAC VAC Photocontrol - Factory Installed PCFAC 8-77 VAC Photocontol - Factory Installed B Two AC Ballasts for Dual Lamp Fluorescent Fixtures Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from W to 75W WG Wire Guard - Field Installed PG Polycarbonate Guard - Field Installed The Trace-lite TL Series features a durable, diecast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. The TL features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a high-impact, heat resistant tempered glass lens. The Trace-lite TL Series uses a medium base, glazed porcelain socket pulse rated for 4KV or universal 4 pin socket. The TL is provided with a high quality ballast, utilizing Electronic, High Power Factor, Reactor, or CWA type ballasts depending on lamp type and wattage. Available with V, /77V, or Multi-tap (/8/4/77V) input. An optional 48V ballast is also available for MH lamps from to 75 watts. The Trace-lite TL Series is available with Compact Fluorescent (6 to 84 watt), Metal Halide (5 to 75 watt) or High Pressure Sodium (5 to 5 watt) lamps to fit any application. The Trace-lite TL Series is ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Can be wired to a 4 junction box, or surface mounted using / NPS conduit entry points. TL-PSMH-5 Mounted at fc Approximate Weight: lbs. 3 Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
6 TLEX LARGE, ARCHITECTURAL TRAPEZOID, FULL CUTOFF, WALLPACK The Trace-lite TLEX Series features a durable, diecast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. The TLEX features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a high-impact, heat resistant tempered glass lens. The Trace-lite TLEX Series uses a medium base, glazed porcelain socket pulse rated for 4KV or universal 4 pin socket. The TLEX is provided with a high quality ballast, utilizing Electronic or CWA type ballasts depending on lamp type and wattage. Available with /77V or Multi-tap (/8/4/77V) input. An optional 48V ballast is also available for MH lamps from to 4 watts. The Trace-lite TLEX Series is available with Compact Fluorescent (6 to 84 watt), Metal Halide ( to 4 watt), Pulse Start Metal Halide (5 watt) or High Pressure Sodium ( to 5 watt) lamps to fit any application. The Trace-lite TLEX Series is ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Can be wired to a 4 junction box, or surface mounted using / NPS conduit entry points. TLEX-PL-6-MT-/77 PL 6 /77 ELECTRONIC TLEX-PL-5-MT-/77 PL 6 x /77 ELECTRONIC TLEX-PL-3-MT-/77 PL 3 /77 ELECTRONIC TLEX-PL-64-MT-/77 PL 3 x /77 ELECTRONIC TLEX-PL-4-MT-/77 PL 4 /77 ELECTRONIC TLEX-PL-84-MT-/77 PL 4 x /77 ELECTRONIC TLEX-MH--MT MH /8/4/77 CWA TLEX-MH-5-MT MH 5 /8/4/77 CWA TLEX-MH-75-MT MH 75 /8/4/77 CWA TLEX-MH-5-MT MH 5 /8/4/77 CWA TLEX-PSMH-5-MT PSMH 5 /8/4/77 CWA TLEX-HPS--MT HPS /8/4/77 CWA TLEX-HPS-5-MT HPS 5 /8/4/77 CWA TLEX-HPS-5-MT HPS 5 /8/4/77 CWA 88% Efficient Ballast compliant with EISA 7 CATALOG # DESCRIPTION PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed PCFAC VAC Photocontrol - Factory Installed PCFAC 8-77 VAC Photocontol - Factory Installed QR5 5W Quartz Restrike Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from W to 4W WGEX Wire Guard - Field Installed PGEX Polycarbonate Guard - Field Installed TLEX-PSMH-5 Mounted at fc Approximate Weight: 6 lbs Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
7 TLEXT LARGE, DEEP, ARCHITECTURAL TRAPEZOID, FULL CUTOFF, WALLPACK TLEXT-MH--MT MH /8/4/77 CWA TLEXT-MH-5-MT MH 5 /8/4/77 CWA TLEXT-MH-75-MT MH 75 /8/4/77 CWA TLEXT-MH-5-MT MH 5 /8/4/77 CWA TLEXT-MH-4-MT MH 4 /8/4/77 CWA TLEXT-PSMH-5-MT PSMH 5 /8/4/77 CWA TLEXT-PSMH-3-MT PSMH 3 /8/4/77 CWA TLEXT-PSMH-35-MT PSMH 35 /8/4/77 CWA TLEXT-PSMH-4-MT PSMH 4 /8/4/77 CWA TLEXT-HPS--MT HPS /8/4/77 CWA TLEXT-HPS-5-MT HPS 5 /8/4/77 CWA TLEXT-HPS-5-MT HPS 5 /8/4/77 CWA TLEXT-HPS-4-MT HPS 4 /8/4/77 CWA 88% Efficient Ballast compliant with EISA 7 CATALOG # DESCRIPTION PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed PCFAC VAC Photocontrol - Factory Installed PCFAC 8-77 VAC Photocontol - Factory Installed QR5 5W Quartz Restrike Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from W to 4W WGEXT Wire Guard - Field Installed PGEXT Polycarbonate Guard - Field Installed The Trace-lite TLEXT Series features a durable, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. The TLEXT features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a high-impact, heat resistant tempered glass lens. The Trace-lite TLEXT Series uses a medium base, glazed porcelain socket pulse rated for 4KV. The TLEXT is provided with a high quality CWA type ballast. Available with Multi-tap (/8/4/77V) input. An optional 48V ballast is also available for MH lamps from to 4 watts. The Trace-lite TLEXT Series is available with Metal Halide (5 or 4 watt), Pulse Start Metal Halide (5 to 4 watt) or High Pressure Sodium (5 or 4 watt) lamps to fit any application. The Trace-lite TLEXT Series is ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Can be wired to a 4 junction box, or surface mounted using / NPS conduit entry points. 9.5 TLEXT-PSMH-4 Mounted at Approximate Weight: 9 lbs fc 3 3 Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
8 TLA ARCHITECTURAL TRAPEZOID, FULL CUTOFF, WALL PACK EM EMERGENCY BALLAST OPTION The Trace-lite TLA Series is available with an optional Emergency Ballast, to provide emergency egress lighting when AC power fails. The EM emergency ballast option will provide 75 lumens of battery back-up for a full 9 minutes. The 75 lumen emergency ballast is integrated in the enclosure and is pre-wired at the factory to 77VAC unless specified otherwise. The Trace-lite TLA Series features a durable, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. The TLA features an internal, anodized aluminum wide throw reflector which provides ideal light distribution. An optional forward throw reflector is also available. The lamp(s) are protected by a highimpact, heat resistant tempered glass lens. The Trace-lite TLA Series uses a medium base, glazed porcelain socket pulse rated for 4KV or universal 4 pin socket. The TLA is provided with a high quality ballast, utilizing Electronic, High Power Factor, Reactor, or CWA type ballasts depending on lamp type and wattage. Available with V, /77V, or Multi-tap (/8/4/77V) input. An optional 48V ballast is also available for MH lamps from to 75 watts. The Trace-lite TLA Series is available with Compact Fluorescent (6 to 84 watt), Metal Halide (7 to 75 watt) or High Pressure Sodium (5 to 5 watt) lamps to fit any application. The Trace-lite TLA Series is ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Can be surface mounted and wired to a 4 junction box. TLA-PL-6-/77 PL 6 /77 ELECTRONIC TLA-PL-5-/77 PL 6 x /77 ELECTRONIC TLA-PL-3-/77 PL 3 /77 ELECTRONIC TLA-PL-64-/77 PL 3 x /77 ELECTRONIC TLA-PL-4-/77 PL 4 /77 ELECTRONIC TLA-PL-84-/77 PL 4 x /77 ELECTRONIC TLA-MH-7-MT MH 7 /8/4/77 HX-HPF TLA-MH--MT MH /8/4/77 HX-HPF TLA-MH-5-MT MH 5 /8/4/77 HX-HPF TLA-MH-75-MT MH 75 /8/4/77 CWA TLA-HPS-7- HPS 5 REACTOR NPF TLA-HPS-- HPS 7 REACTOR NPF TLA-HPS-5- HPS REACTOR NPF TLA-HPS-5-MT HPS 5 /8/4/77 HX-HPF 88% Efficient Ballast compliant with EISA 7 CATALOG # DESCRIPTION EM 3 Integral Emergency Ballast (75 Lumen) PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed QR5 5W Quartz Restrike Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from W to 75W FT Forward Throw Reflector 3 Single lamp compact fluorescent (6, 3, 4 watt) units only TLA-PSMH-5-FT Mounted at 4. fc Approximate Weight: lbs Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
9 TL ARCHITECTURAL HALF-MOON, FULL CUTOFF, WALL PACK TL-PL-6-/77 PL 6 /77 ELECTRONIC TL-PL-3-/77 PL 3 /77 ELECTRONIC TL-PL-4-/77 PL 4 /77 ELECTRONIC TL-MH-5-DT MH 5 /77 HX-HPF TL-MH-7-MT MH 7 /8/4/77 HX-HPF TL-MH--MT MH /8/4/77 HX-HPF TL-MH-5-MT MH 5 /8/4/77 HX-HPF TL-MH-75-MT MH 75 /8/4/77 CWA TL-HPS-35- HPS 35 REACTOR NPF TL-HPS-5- HPS 5 REACTOR NPF TL-HPS-7- HPS 7 REACTOR NPF TL-HPS-- HPS REACTOR NPF TL-HPS-5- HPS 5 REACTOR NPF TL-HPS-5-DT HPS 5 /77 HX-HPF TL-HPS-7-MT HPS 7 /8/4/77 HX-HPF TL-HPS--MT HPS /8/4/77 HX-HPF TL-HPS-5-MT HPS 5 /8/4/77 HX-HPF 88% Efficient Ballast compliant with EISA 7 CATALOG # DESCRIPTION PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from W to 75W The Trace-lite TL Series features a durable, diecast aluminum enclosure with an architectural bronze powder coated finish (consult factory for optional white and black finishes). Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. The TL features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a high-impact, heat resistant tempered glass lens. TL Series uses a glazed porcelain socket pulse rated for 4KV or universal 4 pin socket. The TL is provided with a high quality ballast, utilizing Electronic, High Power Factor, CWA or Reactor type ballasts depending on lamp type and wattage. Available with V, /77V, or Multi-tap (/8/4/77V) input. An optional 48V ballast is also available for MH lamps from to 75 watts. The TL Series is available with Compact Fluorescent (6 to 84 watt), Metal Halide (5 to 75 watt) or High Pressure Sodium (35 to 5 watt) lamps to fit any application. The TL Series is ideal for mounting to any vertical surface and features a rugged, die-cast aluminum mounting plate. Can be surface mounted and wired to a 4 junction box TL-PSMH-5 Mounted at 4 Approximate Weight: 4 lbs.. fc 3 3 Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
10 TLA ARCHITECTURAL HALF-MOON, FULL CUTOFF, WALL PACK EM EMERGENCY BALLAST OPTION The Trace-lite TLA Series is available with an optional integral Emergency Ballast, to provide emergency egress lighting when AC power fails. The EM emergency ballast option will provide 75 lumens of battery back-up for a full 9 minutes. The 75 lumen emergency ballast is integrated in the enclosure and is pre-wired at the factory to 77VAC unless specified otherwise. The Trace-lite TLA Series features a durable, diecast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. The TLA features an internal, anodized aluminum wide throw reflector which provides ideal light distribution. An optional forward throw reflector is also available. The lamp(s) are protected by a highimpact, heat resistant tempered glass lens. TLA Series uses a glazed porcelain socket pulse rated for 4KV or universal 4 pin socket. The TLA is provided with a high quality ballast, utilizing Electronic, High Power Factor, CWA or Reactor type ballasts depending on lamp type and wattage. Available with V, /77V, or Multi-tap (/8/4/77V) input. An optional 48V ballast is also available for MH lamps from to 75 watts. The TLA Series is available with Compact Fluorescent (6 to 84 watt), Metal Halide (5 to 75 watt) or High Pressure Sodium (35 to 5 watt) lamps to fit any application. The TLA Series is ideal for mounting to any vertical surface and features a rugged, die-cast aluminum mounting plate. Can be surface mounted and wired to a 4 junction box. TLA-PSMH-5-FT Mounted at. fc 4 3 TLA-PL-6-/77 PL 6 /77 ELECTRONIC TLA-PL-5-/77 PL 6 x /77 ELECTRONIC TLA-PL-3-/77 PL 3 /77 ELECTRONIC TLA-PL-64-/77 PL 3 x 64 /77 ELECTRONIC TLA-PL-4-/77 PL 4 /77 ELECTRONIC TLA-PL-84-/77 PL 4 x /77 ELECTRONIC TLA-MH-5-DT MH 5 /77 HX-HPF TLA-MH-7-MT MH 7 /8/4/77 HX-HPF TLA-MH--MT MH /8/4/77 HX-HPF TLA-MH-5-MT MH 5 /8/4/77 HX-HPF TLA-MH-75-MT MH 75 /8/4/77 CWA TLA-HPS-35- HPS 35 REACTOR NPF TLA-HPS-5- HPS 5 REACTOR NPF TLA-HPS-7- HPS 7 REACTOR NPF TLA-HPS-- HPS REACTOR NPF TLA-HPS-5- HPS 5 REACTOR NPF TLA-HPS-5-MT HPS 5 /8/4/77 HX-HPF 88% Efficient Ballast compliant with EISA 7 CATALOG # DESCRIPTION EM 3 Integral Emergency Ballast (Compact Fluorescent Lamps Only 75 Lumen) PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed QR5 5W Quartz Restrike Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from W to 75W FT Forward Throw Reflector 3 Single lamp compact fluorescent (6, 3, 4 watt) units only Approximate Weight: 4 lbs. Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
11 TL ARCHITECTURAL QUARTER-SPHERE, FULL CUTOFF, WALL PACK TL-PL-6-/77 PL 6 /77 ELECTRONIC TL-PL-5-/77 PL 6 x /77 ELECTRONIC TL-PL-3-/77 PL 3 /77 ELECTRONIC TL-PL-64-/77 PL 3 x /77 ELECTRONIC TL-PL-4-/77 PL 4 /77 ELECTRONIC TL-PL-84-/77 PL 4 x /77 ELECTRONIC TL-MH-7-MT MH 7 /8/4/77 HX-HPF TL-MH--MT MH /8/4/77 HX-HPF TL-MH-5-MT MH 5 /8/4/77 HX-HPF TL-MH-75-MT MH 75 /8/4/77 HX-HPF TL-HPS-- HPS REACTOR NPF TL-HPS-5- HPS 5 REACTOR NPF 88% Efficient Ballast compliant with EISA 7 CATALOG # DESCRIPTION PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed QR5 5W Quartz Restrike Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from W to 75W FT Forward Throw Reflector The Trace-lite TL Series features a durable, diecast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. The TL features an internal, anodized aluminum wide throw reflector which provides ideal light distribution. An optional forward throw reflector is also available. The lamp(s) are protected by a high-impact, heat resistant tempered glass lens. The Trace-lite TL Series uses a glazed porcelain socket pulse rated for 4KV or universal 4 pin socket. The TL is provided with a high quality ballast, utilizing a High Power Factor, Reactor or Electronic type ballast depending on lamp type and wattage. Available with V, /77V or Multi-tap (/8/4/77V) input. An optional 48V ballast is also available for MH lamps from to 75 watts. The Trace-lite TL Series is available with Compact Fluorescent (6 to 84 watt), Metal Halide ( or 75 watt) or High Pressure Sodium ( or 5 watt) lamps to fit any application. The Trace-lite TL Series is ideal for mounting to any vertical surface and features a rugged, die-cast aluminum mounting plate. Can be surface mounted and wired to a 4 junction box. 9.5 TL-PSMH-5-FT Mounted at Approximate Weight: 3 lbs.. fc 3 3 Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
12 TL ARCHITECTURAL, FULL CUTOFF, WALL PACK TL-PL-6-/77 PL 6 /77 ELECTRONIC TL-PL-3-/77 PL 3 /77 ELECTRONIC TL-PL-4-/77 PL 4 /77 ELECTRONIC TL-MH-5-DT MH 5 /77 HX-HPF TL-MH-7-MT MH 7 /8/4/77 HX-HPF TL-MH--MT MH /8/4/77 HX-HPF TL-MH-5-MT MH 5 /8/4/77 HX-HPF The Trace-lite TL Series features a durable, diecast aluminum housing with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. The TL features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a heat and impactresistant tempered glass lens. The Trace-lite TL Series uses a glazed porcelain socket pulse rated for 4KV or universal 4 pin socket. The TL is provided with a high quality Electronic, HPF, or Reactor type ballast (dependant on lamp type). Unit comes standard with VAC, /77 VAC, or Multi-tap (/8/4/77 VAC) input (dependant on lamp type and wattage). An optional 48V ballast is also available for MH lamps from to 75 watts. The Trace-lite TL Series is available with Metal Halide (75 to 4 watt), High Pressure Sodium (5 or 4 watt) or Compact Fluorescent (6 to 4 watt) lamps to fit any application. The Trace-lite TL Series is ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Unit includes mounting plate with built-in leveler, and can be surface mounted and wired to a 4 junction box. TL-MH-75-MT MH 75 /8/4/77 CWA TL-HPS-35- HPS 35 REACTOR NPF TL-HPS-5- HPS 5 REACTOR NPF TL-HPS-7- HPS 7 REACTOR NPF TL-HPS-- HPS REACTOR NPF TL-HPS-5- HPS 5 REACTOR NPF TL-HPS-5-DT HPS 5 /77 HX-HPF TL-HPS-7-MT HPS 7 /8/4/77 HX-HPF TL-HPS--MT HPS /8/4/77 HX-HPF TL-HPS-5-MT HPS 5 /8/4/77 HX-HPF 88% Efficient Ballast compliant with EISA 7 CATALOG # DESCRIPTION PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from W to 75W TL-PSMH-5 Mounted at 4. fc Approximate Weight: 5 lbs Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
13 TL ARCHITECTURAL, FULL CUTOFF, WALL PACK EM EMERGENCY BALLAST OPTION The Trace-lite TL Series is available with an optional integral Emergency Ballast, to provide emergency egress lighting when AC power fails. The EM emergency ballast option will provide 75 lumens of battery back-up for a full 9 minutes. The 75 lumen emergency ballast is integrated in the enclosure and is pre-wired at the factory to 77VAC unless specified otherwise. TL-PL-6-/77 PL 6 /77 ELECTRONIC TL-PL-5-/77 PL 6 x /77 ELECTRONIC TL-PL-3-/77 PL 3 /77 ELECTRONIC TL-PL-64-/77 PL 3 x /77 ELECTRONIC TL-PL-4-/77 PL 4 /77 ELECTRONIC TL-PL-84-/77 PL 4 x /77 ELECTRONIC TL-MH-5-DT MH 5 /77 HX-HPF TL-MH-5-MT MH 5 /8/4/77 HX-HPF TL-MH-7-MT MH 7 /8/4/77 HX-HPF TL-MH--MT MH /8/4/77 HX-HPF TL-MH-5-MT MH 5 /8/4/77 HX-HPF TL-MH-75-MT MH 75 /8/4/77 CWA TL-HPS-5- HPS 5 REACTOR NPF TL-HPS-7- HPS 7 REACTOR NPF TL-HPS-- HPS REACTOR NPF TL-HPS-5- HPS 5 REACTOR NPF TL-HPS-5-MT HPS 5 /8/4/77 HX-HPF 88% Efficient Ballast compliant with EISA 7 CATALOG # DESCRIPTION EM 3 Integral Emergency Ballast (75 Lumen) PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed QR5 5W Quartz Restrike Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from W to 75W FT Forward Throw Reflector 3 Single lamp compact fluorescent (6, 3, 4 watt) units only The Trace-lite TL Series features a durable, diecast aluminum housing with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. The TL features an internal, anodized aluminum Wide Throw reflector which provides ideal light distribution, an optional Forward Throw reflector is also available. The lamp(s) are protected by a vandalresistant, tempered glass lens. The Trace-lite TL Series uses a glazed porcelain socket pulse rated for 4KV or universal 4 pin socket. The TL is provided with a high quality Electronic, CWA, HPF, Electronic or Reactor type ballast (dependant on lamp type). Unit comes standard with VAC, /77 VAC, or Multi-tap (/8/4/77 VAC) input (dependant on lamp type and wattage). An optional 48V ballast is also available for MH lamps from to 75 watts. The Trace-lite TL Series is available with Metal Halide (5 to 75 watt), High Pressure Sodium (5 to 5 watt) or Compact Fluorescent (6 to 84 watt) lamps to fit any application. The Trace-lite TL Series is ideal for mounting to any vertical surface and features a hinged design for easy access to internal components. Unit can be surface mounted to a standard 4 junction box using easy hang plate. TL-PSMH-5-FT Mounted at fc 8. Approximate Weight: 5 lbs Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
14 TL3 MEDIUM, FULL CUTOFF, AREA LIGHT The Trace-lite TL3 Series features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. The TL3 features an internal, anodized aluminum reflector which provides ideal general light distribution, and the lamp(s) are protected by a high-impact, heat-resistant tempered glass lens. Many other reflector options available. The Trace-lite TL3 Series uses a glazed porcelain socket pulse rated for 4KV. The TL3 is provided with a high quality CWA type ballast. Available with Multi-tap (/8/4/77V) input. An optional 48V ballast is also available for MH lamps up to 4 watts. The Trace-lite TL3 Series is available with Metal Halide (75 to 4 watt), Pulse Start Metal Halide (5 to 4 watt) or High Pressure Sodium (5 or 4 watt) lamps to fit any application. The Trace-lite TL3 Series is ideal for mounting to any surface and comes complete with 6 pole mount bracket bracket (EXM-6SS). Cover is hinged for easy access to lamp and internal components. TL3-HPS-4 Mounted at.fc. fc fc TL3-MH-75-MT MH 75 /8/4/77 CWA TL3-MH-5-MT MH 5 /8/4/77 CWA TL3-MH-4-MT MH 4 /8/4/77 CWA TL3-PSMH-5-MT PSMH 5 /8/4/77 CWA TL3-PSMH-3-MT PSMH 3 /8/4/77 CWA TL3-PSMH-35-MT PSMH 35 /8/4/77 CWA TL3-PSMH-4-MT PSMH 4 /8/4/77 CWA TL3-HPS-5-MT HPS 5 /8/4/77 CWA TL3-HPS-4-MT HPS 4 /8/4/77 CWA 88% Efficient Ballast compliant with EISA 7 mounting arms (EXM-6SS included with unit) EXM-6XX EXM-XX EXM-XX EXM-8XX LENGTH REFLECTORS CATALOG # PC PC PCFAC PCFAC QR5 DESCRIPTION SQUARE SS STRAIGHT VAC Photocontrol - Field Installed 8-77 VAC Photocontol - Field Installed VAC Photocontrol - Factory Installed 8-77 VAC Photocontol - Factory Installed 5W Quartz Restrike Single Fusing on Line Side of Ballast (/77V) ROUND CATALOG # DESCRIPTION MAX WATTS STR3 Standard (Included) 4 MH/4 HPS T5R3 I.E.S. Type 5 4 MH/4 HPS PAR3 Parking (Wide Angle) 4 MH/4 HPS SR Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts up to 4W WG3 PG3 GS3 BF Wire Guard Polycarbonate Guard Glare Shield (Can be reversed) Baffle Approximate Weight: 5 lbs. EPA: When mounted horizontally 4 Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
15 TL3 SMALL, FULL CUTOFF, AREA LIGHT TL3-MH-7-MT MH 7 /8/4/77 HX-HPF TL3-MH--MT MH /8/4/77 HX-HPF TL3-MH-5-MT MH 5 /8/4/77 HX-HPF TL3-MH-75-MT MH 75 /8/4/77 CWA TL3-HPS-7- HPS 7 REACTOR NPF TL3-HPS-- HPS REACTOR NPF TL3-HPS-5- HPS 5 REACTOR NPF TL3-HPS-5-MT HPS 5 /8/4/77 HX-HPF 88% Efficient Ballast compliant with EISA 7 mounting arms (EXM-6SS included with unit) EXM-6XX EXM-XX EXM-XX EXM-8XX REFLECTORS CATALOG # DESCRIPTION MAX WATTS STR3 Std Smooth (Included) 75 MH/5 HPS T5R3 I.E.S. Type 5 75 MH/5 HPS FTR3 Forward Throw 75 MH/5 HPS PAR3 Parking (Wide Angle) 75 MH/5 HPS COR3 Cutoff 75 MH/5 HPS 5.3 LENGTH CATALOG # PC PC PCFAC PCFAC QR5 DESCRIPTION.4.4 SQUARE SS 5.6 STRAIGHT VAC Photocontrol - Field Installed 8-77 VAC Photocontol - Field Installed VAC Photocontrol - Factory Installed 8-77 VAC Photocontol - Factory Installed 5W Quartz Restrike Single Fusing on Line Side of Ballast (/77V) ROUND SR Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from to 75W WG3 PG3 GS3 Wire Guard Polycarbonate Guard Glare Shield (Can be reversed) Approximate Weight: lbs. EPA:.55 The Trace-lite TL3 Series features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. The TL3 features an internal, anodized aluminum reflector which provides ideal general light distribution, and the lamp(s) are protected by a high-impact, heat-resistant tempered glass lens. Many other reflector options available. The Trace-lite TL3 Series uses a glazed porcelain socket pulse rated for 4KV. The TL3 is provided with a high quality ballast, utilizing CWA, High Power Factor or Reactor type ballasts depending on lamp type and wattage. Available with V, /77V, or Multi-tap (/8/4/77V) input (dependant on lamp type). An optional 48V ballast is also available for MH lamps from to 75 watts. The Trace-lite TL3 Series is available with Metal Halide (7 to 75 watt) or High Pressure Sodium (7 or 5 watt) lamps to fit any application. The Trace-lite TL3 Series is ideal for mounting to any surface and comes complete with 6 pole mount bracket (EXM-6SS). Cover is hinged for easy access to lamp and internal components. TL3-PSMH-5 Mounted at fc..fc When mounted horizontally Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
16 TL33 LARGE, FULL CUTOFF, AREA LIGHT TL33-MH--MT MH /8/4/77 CWA TL33-PSMH-75-MT PSMH 75 /8/4/77 CWA TL33-PSMH--MT PSMH /8/4/77 CWA TL33-HPS--MT HPS /8/4/77 CWA The Trace-lite TL33 Series features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. The TL33 features an internal, anodized aluminum reflector which provides ideal general light distribution, and the lamp(s) are protected by a high-impact, heat-resistant tempered glass lens. Many other reflector options available. The Trace-lite TL33 Series uses a glazed porcelain socket pulse rated for 4KV. The TL33 is provided with a high quality CWA type ballast and Multi-tap (/8/4/77V) input. An optional 48V ballast is also available for MH lamps up to watts. The Trace-lite TL33 Series is available with Metal Halide, Pulse Start Metal Halide or High Pressure Sodium lamps up to watts. The Trace-lite TL33 Series is ideal for mounting to any surface and comes complete with 6 pole mount bracket (EXM-6SS). Cover is hinged for easy access to lamp and internal components. REFLECTORS CATALOG # DESCRIPTION MAX WATTS STR33 Std Reflector (Included) MH/HPS T5R33 I.E.S. Type 5 MH/HPS FTR33 Forward Throw MH/HPS PAR33 Parking (Wide Angle) MH/HPS COR33 Cutoff MH/HPS CATALOG # DESCRIPTION PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed PCFAC VAC Photocontrol - Factory Installed PCFAC 8-77 VAC Photocontol - Factory Installed QR5 5W Quartz Restrike Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts up to W WG3 Wire Guard PG3 Polycarbonate Guard GS3 Glare Shield (Can be reversed) BF3 Baffle EXM-6S-X 6 Pole Mount Arm - Specify Round (R) or Square (S) Pole Included as standard TL33-MH- Mounted at fc 6. fc fc 4 Approximate Weight: 4 lbs. EPA: When mounted horizontally Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
17 TL34 LARGE, FULL CUTOFF, AREA LIGHT TL34-MH-75-MT MH 75 /8/4/77 CWA TL34-MH-5-MT MH 5 /8/4/77 CWA TL34-MH-4-MT MH 4 /8/4/77 CWA TL34-PSMH-5-MT PSMH 5 /8/4/77 CWA TL34-PSMH-3-MT PSMH 3 /8/4/77 CWA TL34-PSMH-35-MT PSMH 35 /8/4/77 CWA TL34-PSMH-4-MT PSMH 4 /8/4/77 CWA TL34-HPS-5-MT HPS 5 /8/4/77 CWA TL34-HPS-4-MT HPS 4 /8/4/77 CWA 88% Efficient Ballast compliant with EISA 7 mounting arms (EXM-6SS included with unit) STRAIGHT LENGTH SQUARE ROUND EXM-6XX EXM-XX EXM-XX SS SR EXM-8XX REFLECTORS CATALOG # DESCRIPTION MAX WATTS STR34* Standard (Included) 4 MH/4 HPS T5R34* I.E.S. Type 5 4 MH/4 HPS PAR34* Parking (Wide Angle) 4 MH/4 HPS HMR34** Horizontal Mount 75 MH/5 HPS CSR34** Cobra Style 5 MH/5HPS * Only available with Half-Open Frame ** Only available with Full-Open Frame CATALOG # DESCRIPTION PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed PCFAC VAC Photocontrol - Factory Installed PCFAC 8-77 VAC Photocontol - Factory Installed QR5 5W Quartz Restrike Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from to 4W WG3 Wire Guard PG3 Polycarbonate Guard GS3 Glare Shield (Can be reversed) Approximate Weight: 5 lbs EPA:.85 The Trace-lite TL34 Series features a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. The TL34 features an internal, anodized aluminum reflector which provides ideal general light distribution, and the lamp(s) are protected by a high-impact, heat-resistant tempered glass lens. Many other reflector options available The Trace-lite TL34 Series uses a glazed porcelain socket pulse rated for 4KV. The TL34 is provided with a high quality CWA type ballast and Multi-tap (/8/4/77V) input. An optional 48V ballast is also available for MH lamps up to 4 watts. The Trace-lite TL34 Series is available with Metal Halide (75 to 4 watt), Pulse Start Metal Halide (5 to 4 watt) or High Pressure Sodium (5 or 4 watt) lamps to fit any application. The Trace-lite TL34 Series is ideal for mounting to any surface and comes complete with 6 pole mount bracket (EXM-6SS). Cover is hinged for easy access to lamp and internal components. TL34-HPS-4 Mounted at.fc. fc fc When mounted horizontally Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
18 TL35 ARCHITECTURAL, FULL CUTOFF, AREA LIGHT TL35-MH-5-MT MH 5 /8/4/77 CWA TL35-MH-4-MT MH 4 /8/4/77 CWA TL35-PSMH--MT PSMH /8/4/77 CWA TL35-PSMH-5-MT PSMH 5 /8/4/77 CWA TL35-PSMH-3-MT PSMH 3 /8/4/77 CWA TL35-PSMH-35-MT PSMH 35 /8/4/77 CWA TL35-PSMH-4-MT PSMH 4 /8/4/77 CWA TL35-HPS-5-MT HPS 5 /8/4/77 CWA TL35-HPS-4-MT HPS 4 /8/4/77 CWA 88% Efficient Ballast compliant with EISA 7 The Trace-lite TL35 Series features a durable, corrosion-resistant, die-cast aluminum enclosure with a black powder coated finish standard. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosionresistant hardware. The TL35 features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a high-impact, heat-resistant tempered glass lens. The Trace-lite TL35 Series uses a glazed porcelain socket pulse rated for 4KV. The TL35 is provided with a high quality CWA type ballast and Multi-tap (/8/4/77V) input. An optional 48V ballast is also available for MH lamps up to 4 watts. The Trace-lite TL35 Series is available with Metal Halide (75 to 4 watt), or High Pressure Sodium (5 to 4 watt) lamps to fit any application. The Trace-lite TL35 Series is ideal for mounting to any surface and comes complete with 6 pole mount bracket (PM35). Cover is hinged for easy access to lamp and internal components. CATALOG # DESCRIPTION PC VAC Photocontrol - Field Installed PC 8-77 VAC Photocontol - Field Installed PCFAC VAC Photocontrol - Factory Installed PCFAC 8-77 VAC Photocontol - Factory Installed Single Fusing on Line Side of Ballast (/77V) Double Fusing on Line Side of Ballast (8/4/48V) 48 48V Ballast for MH Ballasts from to 4W WG35 Wire Guard PG35 Polycarbonate Guard GS35 Glare Shield (Can be reversed) TL35-PSMH-4 Mounted at fc. fc fc 4 8 Approximate Weight: 5 lbs. When mounted horizontally Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
19 notes Trace-lite, a division of BARRON LIGHTING GROUP 9 W Parkside Ln Phoenix, AZ 857 (8)
20 Trace-lite, a division of BAR RON LIGHTING GROUP 9 West Parkside Lane Phoenix, AZ 857 (8) Fax: (63) This catalog has been produced by an eco-friendly printing process utilizing waterless offset printing, chemical-free imaging and soy-based inks. The enviromentally responsible printing practices used to produce this material conserve energy, water and other natural resources /9
Laredo Decorative Wallpack Family
Outdoor Lighting Laredo Decorative Wallpack Family NEW Selections Full Cutoff IDA Compliant Laredo Application Guide Compact LCC 6-1ft mounting height The Laredo Family meets the Strictest Lighting Codes
More informationPerimaliter Wallpacks
Perimaliter Wallpacks Perimaliter III PVL3 / PGM3 Perimaliter II PGL Solutions for Perimeter/Area Lighting Perimaliter Wallpacks The Perimaliter wallpack has been the design leader in refractor wallpacks
More informationLaredo - Decorative Wallpack Family
Outdoor Lighting Laredo - Decorative Wallpack Family Full Cutoff New Laredo Application Guide Compact LCC 6-1ft mounting height The Laredo Family meets the strictest lighting codes Full Cutoff Star View
More informationWPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl Catalog Number Manufacturer Description Weight per unit Product
More informationDESCRIPTION Galleria's beauty and versatility make it an excellent choice for roadway and general area lighting applications. An aesthetic reveal in the formed aluminum housing gives the Galleria a distinctive
More informationKAD250MR3TBSPD04 Wall Fixture
8 South Street 796-76, TX Nacogdoches Phone: 96-69-79 Fax: 96-6-68 AllenWatson@elliottelectric.com MRTBSPD Wall Fixture Catalog Number MRTBSPD Manufacturer Description Area Light, Metal Halide Lamp; Lamp
More informationPerimaliter Wallpacks
ENERGY SAVING Outdoor Lighting Perimaliter Wallpacks Perimaliter III PVL3 / PGM3 Perimaliter II PGL Solutions for Perimeter/Area Lighting Perimaliter Wallpacks The Perimaliter wallpack has been the design
More informationTORNADOTM BOLLARD PATENTS PENDING
TORNADOTM BOLLARD PATENTS PENDING Day Tornado Bollard Unlike any bollard available in today s specification pallet, Tornado offers a new form and character for pedestrian scale lighting. Tornado adds an
More informationA R C H I T E C T U R A L LO W L E V E L F LO O D L I G H T S E R I E S
T A B L E O F C O N T E N T S A R C H I T E C T U R A L LO W L E V E L F LO O D L I G H T S E R I E S LLF755 - Low Level Flood with Anti-Glare Faceplate C1.1 LLF800 - Low Level Flood with Anti-Glare Faceplate
More informationPGL350P W PS Wallpack
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 PGL350P1281 350W PS Wallpack Hubbell Lighting, Inc. Catalog Number Manufacturer Description Weight per unit Product Category
More informationSOURCE TE- Electronic MH. OPTIONS See Below OPTIONS. L = Lamped BLANK = General Purpose Optics A = Asymmetric Optics S = Spot
CATALOG NO. TYPE NO. JOB NAME -8 GP Flood Series Floodlighting GP (Mini) ORDERING INFORMATION Catalog Number: Example: GPA070TEL GP A TE SERIES GP-General Purpose Flood SIZE -Mini ACCESSORIES GPGS = Visor
More informationApplications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
More informationORDERING INFORMATION: 120 Volts (120)
Bull38 A weather tight unit fabricated from durable grade die-cast aluminum & fully sealed, gasketed glass lens. Mount: 1/2 threaded adjustable knuckle mount Porcelain medium base socket Thermoset polyester
More informationOP2 CosmoPolis Series
Catalog Number: Approvals: - - - - - Series/Source-Wattage Optics E ballast Voltage Mounting Options Finish (Factory Installed) Accessories (Field Installed) Date: Page of 6 Overall Dimensions OP2 arm
More informationAFL FLOODLIGHT SERIES
AFL FLOODLIGHT SERIES A FL Flood Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 598A Marine Outside Type Zone 2, Groups IIA, IIB & IIC CUL Cast Aluminum
More informationApplications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires Class I, Division 1 and 2, Groups C, D Class I, Division 1 and 2, Groups B, C, D Applications Ideal for use in chemical and petrochemical plants, such as manufacturers
More informationAreamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
More informationInduction Compact Fluorescent HID LPQ. Canopy Luminaire
Induction Compact Fluorescent HID LPQ Canopy Luminaire LPQ Series Lighting For Life Featuring the Philips QL Induction Lighting System 100,000 Hours of Operation Very Low Maintenance Efficient Operation
More informationA2CO Series. Aktra II Cutoff Floodlight, W HID. Overall Dimensions. Specifications EPA Effective Projected Area.
Catalog Number: Approvals: - - - - - Series/Source-Wattage Optics Voltage Mounting Options Finish (Reflector) (Factory Installed) Overall Dimensions 16 (40.6 cm) 8.9 (22.5 cm) Weight (maximum) 20.5 (52.07
More informationAreamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:
More information1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC
1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC Part #: MHFL-1000W Made in the USA The powerful and efficient MHFL-1000W metal halide light fixture from Larson
More informationPost Top Globes. ACL Large Acorn Post Top Globe Page 109. ACS Small Acorn Post Top Globe Page 109
s s ACS Small Acorn 109 ACL Large Acorn 109 AC3, AC5 Large Type 3 or 5 Acorn 109 BKS Small Buckeye 111 BKL Large Buckeye 111 BK3, BK5 Large Type 3 or 5 Buckeye 111 Small Chestnut 113 Large Chestnut 113
More informationDECORATIVE. Tear Drop Series
DECORATIVE Tear Drop Series D ECORATIVE Product Catalog Tear Drop Series Styled to replicate the tear drop luminaires that illuminated boulevards during the first half of the century, the Holophane Tear
More informationCEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2
Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Applications For use in chemical and petrochemical plants, such as manufacturers
More informationDual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire
Dual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire For additional configurations see our Product Catalog or visit our website at WINDIRECT TM 3 in1 Dual Lamp Ceramic Metal Halide CMH x 2 1
More informationLIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options
Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,
More informationORDERING INFORMATION: 120 Volts (120) 208 Volts (208) 240 Volts (240) 277 Volts (277) 480 Volts (480)
Del Mar Corrosion resistant, Weather Tight Unit fabricated from spun Aluminum.080 Thick, Full Gasket Keeps out insects and Water. Lens & Removable Door Assembly: Hinged Door Assembly Formed from One Piece
More informationLighting: Explosionproof Area HID. Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
More informationHID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options
Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities
More informationC A M B E RTM PATENTS PENDING
C A M B E RTM PATENTS PENDING DAY CAMBER TM Camber is designed to be seen both day and night. Its daytime form is an eclectic blend of curvilinear and rectilinear lines accentuated by structurally expressive
More informationHeight Finish Pole Options. Mounting Lamping Finish Voltage. Metal Halide. Single. H w H070 70w H w H w 15 1 /4" (387mm) 15 3 /4"
Vektor Project: Series Reflector Mounting Lamping Finish Voltage VE Vektor R Type II Aluminum Reflector Single R5 Type V Aluminum Reflector Double M Single ' Arm M Double ' Arm W Wall T Single Fitter Type:
More informationOverall Dimensions. Specifications
Overall Dimensions EFX B EFX VM Vertical Mount C 13 housing (70-400W) 19 housing (450-1000W) E D H B C D E 13.3 16.8 16.2 7.0 9.8 (33.78cm) (42.67cm) (41.15cm) (17.78cm) (24.89cm) F G H I J 22.2 11.3 6.3
More informationHubbell Lighting Expressline Family 2009
Hubbell Lighting Expressline Family 2009 LIGHTING SOLUTIONS ExpressLine by Hubbell Lighting The name Hubbell has long been associated with quality products sold through the Electrical Distribution Channel.
More informationOverall Dimensions. Specifications
Overall Dimensions EFI Mastfitter Mount (MA2) (standard) A 70-400W HID unit: 13 Housing A B C 13.3 11.3 23.3 (33.78cm) (28.70cm) (59.18cm) 750-1000W HID and 85-165W QL unit: 19 Housing A B C 19.4 14.9
More information3900 BOLLARD SERIES.
BY 3900 BOLLARD SERIES The 3900 Bollard Series was designed to light landscapes, pathways and high traffi c areas. The bollards feature lamp housings that minimize water and dust infi ltration, keeping
More informationLow brightness and uplighting combine to create a pleasing visual environment. Softbay Series
Low brightness and uplighting combine to create a pleasing visual environment Softbay Series Keene MAKES LIGHT WORK Softbay is a durable performer in light-to-moderate industrial environments and an enduring
More informationEAL Series. Effex Area Luminaire, W HID. Overall Dimensions. Specifications Approvals: Catalog Number: Date: Page 1 of 6
Catalog Number: Approvals: - - - - - Series/Source-Wattage Optics Voltage Mounting Options Finish (Distribution) (Factory Installed) Accessories (Field Installed) Date: Page 1 of 6 Overall Dimensions EAL
More information220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount Part #: HAL-PRM-250W-HPS-220V-PT Page: 1 Made in the USA The efficient HAL-PRM-250W-HPS-220V-PT high pressure sodium
More informationLED STEP LIGHT LED Forms
LED STEP LIGHT LED Forms OUTDOOR INDOOR Inspiration will come in abundance once you try our LED accent step lights. Use them outdoors on your deck or on the stairs inside of your home. You will be truly
More informationVisor Compact Architectural LED Wallpack. Technical Specifications VISOR TM. Visor Configuration Information. Project Catalog Number Type Date
VISOR TM led wallpack Visor compact architectural LED wallpacks replace up to 250W pulse start metal halide wall-mounted fixtures in perimeter, security, and entrance way applications while consuming up
More informationDURAGUARD ELECTRONIC HID LIGHTING
DURAGUARD ELECTRONIC HID LIGHTING Features & Benefits One of the most energy-saving innovations in the lighting industry has been the development of electronic HID ballasts. The precise control of light
More informationApplications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) Class I, Division
More informationPole Series. Series Reflector Lens Mounting Lamping Finish Voltage. S w S w S w S w
Type: Qty: QHO Series Reflector Lens Mounting Lamping Finish Voltage QHO Quadro HO R Type II Aluminum reflector R5 Type V Aluminum reflector L S Project: Flat Glass Sagged Glass Series Reflector Lens Mounting
More informationAerolumeTM. Collection. Area Luminaires 3 Fixture Sizes W HID 64/80/120
Aerolume Collection Area Luminaires Fixture Sizes 70-00W HID 64/80/ Overview Mini-Aerolume Aerolume Aerolume-G 1." (4.9mm) 18" (47.mm) " (84.mm) 6." (16.1mm) 19" (48.6mm) 4" (1.4mm) 8" (0.mm) " (84.mm)
More informationHID/AREA: NEC/CEC EXPLOSIONPROOF. Applications. NEC/CEC Certifications and Compliances
Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH. Applications Ideal for use in chemical and petrochemical plants, such as
More informationApplications. Straight Stanchion-Mount Fixture with Prismatic Glass Refractor and Guard. Pendant Mount Fixture with Prismatic Glass Refractor
Mercmaster III HID 50-250 Watt Luminaires Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical processing and other areas where
More informationIntroduction. Porcelain 4KV pulse rated medium/mogul base socket Silicone gasket
Hi Introduction Orbit Industries presents a diverse array of premium quality architectural lighting. We offer High Pressure Sodium, Metal Halide (both Standard and Pulse Start modes), Halogen and Compact
More information1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens
1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens Part #: HALPRM-1000WMH Made in the USA The extremely durable Larson Electronics HALPRM-1000WMH metal halide
More informationCrosstour LED Wall Mount Luminaire
Crosstour LED Wall Mount Luminaire TM LED WALL PACK Wall or Surface Mount Post or Bollard Mount Pathway or Stairs Inverted Mount 1 Universal Low-Profile Design A New Revolution in Outdoor Lighting Pioneered
More informationkenall dark sky luminaires
kenall dark sky luminaires Millenium Finite Wall Mount Millenium Edge Ceiling Mount Herculux Wall and Ceiling Mount Kenall's dark sky solution As more buildings are constructed and equipped with powerful
More informationStandard Grade 23 Inch Reflector/Refractor. Ordering Information. series wattage source voltage optics color options options BL-LB1
Job Type Dimensions Specifications B A C NRTL/C Damp Location D Slick-On Quick-On E A B C D E 9-1/2" 2" 9-1/2" 26-11/16" 23-1/8" 241 mm 51 mm 241 mm 678 mm 587 mm 9-1/2" 1-1/8" 8-5/8" 25-13/16" 23-1/8"
More informationLUMENTON. including poured concrete. Suitable for installation within 4 feet of ground. Product specifications subject to change without notice.
WSV600 Wall Luminaire with Open faceplate 2007.4.13 Applications: Oval Surface Wall Sconce Luminaires are ideal for indoor or outdoor applications in, residential, commercial, or architectural installations
More informationIndustrial and Commercial Indoor Parking and Area Security Lighting Floodlighting Sports Lighting HID Controls
Industrial and Commercial Indoor Parking and Area Security Lighting Floodlighting Sports Lighting HID Controls Makes Light Work Solid, job-ready performers, lighting our work and leisure environments,
More informationStandard Grade 14 Inch Reflector. Ordering Information
Job Type Dimensions Specifications B A NRTL/C C Damp Location D E Slick- On Quick- On F A B C D E F 9-1/2" 2" 9-1/2" 20-22/32 24-27/32" 9-7/16" 14-1/4" 241 mm 51 mm 241 mm 536-631 mm 240 mm 362 mm 9-1/2"
More informationSaturn Cutoff. Order Code: Pole Order Code: Series Height Finish Options. Customer: Date: Project: Qty: Type: SAC Saturn Cutoff SAC
Date: Customer: Project: Type: Qty: Saturn Cutoff Order Code: SAC - - - - - - - - SAC Series SAC Saturn Cutoff Pole Order Code: - - - Series Height Finish Options Optics R Type II Distribution R Type V
More informationLytePro. A Family of Architectural LED Luminaires. Solid State, Solid Solutions. Stonco is a Philips company
LytePro A Family of Architectural LED Luminaires Solid State, Solid Solutions. Stonco is a Philips company Complements the simplest to the most complex of architectural landscapes LED area and site lighting
More informationCALL TODAY!
DIRECT LIGHTING MFG. Serving Your Business, Mapping our Future To Our Valued ers: In today s uncertain economy your customers are looking to save Money with quality alternatives, we are the right source
More informationSeries Optics Mounting Lamping Finish Voltage. H039T6 1 39wT6 H w. H w. (T6 only available with MA and MS refractors) 12 3 /8" (314mm)
Project: Type: Qty: TC _ Series Optics Mounting Lamping Finish Voltage _ Options Series TC Triangular Column Optics Height Lamping Finish Voltage Options MA Type III MTR 5* Refractor MS Type V MTR 5* Refractor
More informationAPPENDIX B: LISTS OF APPROVED MATERIALS
APPENDIX B: LISTS OF APPROVED MATERIALS APPENDIX B: LISTS OF APPROVED MATERIALS B1 Street Lighting MAY 2016 APPENDIX B1 STREETLIGHTING MATERIAL LIST 1.0 LIGHTING 1.1 Electrical Handholes CSA Precast concrete
More informationFCW3043 ADA FCW3045 ADA FCW3042 ADA FCW3040 ADA
FCW3043 2.5 in FCW3045 2.3 in FCW3042 2.3 in FCW3040 2.2 in 120 www.fclighting.com *Consult website for updated specification sheets regarding detailed information and performance. FC Lighting, Inc. 2012.
More informationMetroVue HOLOPHANE THE
HOLOPHANE MetroVue THE METROVUE SERIES IS A MODERN APPROACH TO STREET AND AREA LIGHTING WITH MANY FAMILIAR DESIGN ELEMENTS, DESIGNED TO PROMOTE A WARM, INVITING SPACE THAT WELCOMES POSITIVE NIGHTTIME ACTIVITY.
More informationHubbell Lighting s ExpressLine family
Hubbell Lighting s ExpressLine family Value & Service for you and your customers! ExpressLine by Hubbell Lighting The name Hubbell has long been associated with quality products sold through the Electrical
More informationHOLOPHANE Outdoor Lighting
68 Sign Lighting Signs have two purposesto attract attention and to convey a message. And during nighttime hours, sign lighting must provide visibility and legibility to deliver the appropriate message.
More informationENERGY SAVING PRODUCTS LIGHTING
ENERGY SAVING PRODUCTS LIGHTING POLYCARBONATE WALL PACK JWP2/42CFLMVPC PK 2 X 42W PLT CFL 120 277V 50/60Hz Electronic GX24q4 6400 14 3/8 12 7 1/4 1 pc. 9.4 lbs. 0.95 cft. Ideal for Security and Perimeter
More informationLEDMPAL15 15 Watt Multi-Purpose LED Area Light
LEDMPAL15 15 Watt Multi-Purpose LED Area Light Project: Type: Catalog #: STANDARD FEATURES WET 1kV Surge Protection Available in 3000k (warm white), 4000K (neutral white) and 5000K (cool white). * Long-life
More informationH700 H710 H720. Compact Flood. Typical Applications. Features. Lamp Types. Approvals SPECIALTY LANDSCAPE
Compact Flood H00 H0 H0 ECIALTY LANDSCAPE Typical Applications Sculptures Statues Courtyards Building Facades Architectural Details Night Gardens Signage Features Beam Control Glare Control Color Control
More informationSXPJ SERIES S X. HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations
SXPJ SERIES HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division 1, Groups E, F & G Class III Zone 1, Groups IIA & IIB Factory
More informationIMPACT FLOODLIGHT Architectural Flood Luminaire
IMPCT FLOODLIGHT rchitectural Flood Luminaire CLSSIC FORM + C O N T E M P O R R Y F E T U R E S ppealing round-back form combined with innovative design features make the Impact Flood series a best in
More informationTaxonomies, Classifications, and Categories LED FLOODLIGHTS, WALLPACKS, BOLLARDS & LANDSCAPE LIGHTING
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 XT0R5A 50W Led Wallpack Catalog Number Manufacturer Description Weight per unit Product Category Features amperage rating
More informationA r c h i t e c t u r a l A r e a L i g h t i n g
to create, inspire and nurture excellence in each other Energy Efficiency The Flex is designed to use electrical energy in the most efficient possible way. The reflectors are designed to direct the illumination
More information4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D)
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D) Cl. I, Div. 1 Groups B (GB suffix),c,d (with suffix GB), IIB IIA Paint Spray (100W max) Application: Hazard Gard luminaires are
More informationGATEWAY ARCHITECTURAL LIGHTING APPEARANCE PERFORMANCE ENDURANCE
GATEWAY ARCHITECTURAL LIGHTING APPEARANCE PERFORMANCE ENDURANCE GATEWAY ARCHITECTURAL LIGHTING The Gateway Architectural Lighting Series offers a variety of styles designed to accent architectural settings
More informationLEDMPALPRO LED Area Luminaire
CATALOG NUMBER: NOTES: FIXTURE TYPE: PROJECT: FEATURES DIMENSIONS 2 ¾ 12 ⅝ 1 ⅝ Weight: 8.2 lbs. (8W), 1.8 lbs. (1W) & 11 lbs. (14W) PRODUCT DESCRIPTION The LEDMPALPRO series is a group of premium architectural
More informationA R E A & S I T E WA L L M O U N T E D B O L L A R D S T E C H N I C A L S P E C I F I C AT I O N S
A R E A & S I T E WA L L M O U N T E D B O L L A R D S T E C H N I C A L S P E C I F I C AT I O N S H OW TO SPECI FY Choose the boldface catalog nomenclature that best suits your needs. 1 3 5 7 8 W AT
More informationThe ideal complement for commercial and retail spaces where users will appreciate classic interpretations of style and elegance. Kaleidoscope Series
The ideal complement for commercial and retail spaces where users will appreciate classic interpretations of style and elegance Kaleidoscope Series Keene MAKES LIGHT ORK Keene presents Kaleidoscope, an
More informationCatalog # Project. Comments. Prepared by. 11" [279mm] 8-3/4" [222mm] ESCUTCHEON PLATES. 2-5/8" [67mm] 3/4" [19mm] Dia. Hole. 3" [77mm] 1-1/2" [39mm]
DESPTION SPECIFICATION FEATURES at The patented Lumark Crosstour MAXX LED Wall Pack Series of luminaries provides low-profile architectural style with super bright, energy-efficient LEDs. The rugged die-cast
More informationIntroducing the latest models of performance lighting for automobile dealerships!
Introducing the latest models of performance lighting for automobile dealerships! DOES YOUR DEALERSHIP LIGHTING DESIGN MEASURE-UP TO THE HIGH PERFORMANCE OF VISIONAIRE LIGHTING? Visionaire introduces the
More informationExceLine 1611 Clovis R. Barker Road San Marcos, TX Fax: PT#: EXSP072A0812
Type No. Catalog No. Job. Name WL Series APPLICATIONS Applications include low ceiling applications, light industrial manufacturing facilities, offices, lobbies, conference rooms, food processing plants,
More information80 Watt Multi-Purpose LED Area Light
JGMPAL Watt Multi-Purpose LED Area Light STANDARD Project: Type: Catalog #: WET kv Surge Protection IP65 The JGMPAL series is a group of architectural LED area luminaires designed to illuminate parking
More informationG1-24. Applications UL listed for marine type electric fixtures--outside. Ideal in Class I, Div. 1 and 2 installations
1-24 Applications UL listed for marine type electric fixtures--outside type (salt water). Ideal in Class I, Div. 1 and 2 installations in refineries, pipeline transportation facilities; at drilling rigs
More informationExceLine 1611 Clovis R. Barker Road San Marcos, TX Fax: PT#: EXSP038A0712
Type No. Catalog No. Job. Name ILXGHB MasterColor Elite Series APPLICATIONS Applications include industrial facilities, manufacturing plants, retail applications, and gymnasiums. CONSTRUCTION The ILX MasterColor
More informationMLCAN60LED50 CONSTRUCTION: 60W LED CANOPY LIGHT
MLCANLED50 W LED CANOPY LIGHT The surface mounted canopy fixture, with a shatter and UV resistant polycarbonate lens, can be mounted to J-box or directly to non-combustable surfaces. The LEDs are proprietary
More informationDriver Info. Construction Thermal Management: Superior thermal management with die-cast aluminum heatsink. Ambient Temperature:
WP3LED55 Project: Type: Prepared By: Date: 82W, 65W and 55W LED wallpacks. Available with up to 9,000 lumens and 121 LPW. Up to 100,000 hour L70 lifespan. 5-Year Warranty. Color: Bronze Weight: 16.8 lbs
More informationUnderstanding Electronic UltraMax HID Ballasts
Understanding Electronic UltraMax HID Ballasts GE offers a complete line of electronic ballasts for HID lighting systems. Electronic HID, like electronic fluorescent systems that preceded it, significantly
More informationSAFJ LED SERIES S A L E D. Hazardous Location Compact LED
SAFJ LED SERIES Hazardous Location Compact LED Class I, Division 2, Groups A, B, C, & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations NEMA 3R,
More informationExplosion Proof Dock Light - Class I, Div. I, Groups C & D - 70 Watt LED Lamp - Extension Arm
Explosion Proof Dock Light - Class I, Div. I, Groups C & D - 70 Watt LED Lamp - Extension Arm Part #: EPL-DL-70LED-24 Page: 1 Made in the USA The EPL-DL-70LED-24 Explosion Proof Dock Light is U.L. approved
More informationMANDATORY MEASURES OUTDOOR LIGHTING CONTROLS. (Reference: Sub-Chapter 4, Section 130)
MANDATORY MEASURES CONTROLS (Reference: Sub-Chapter 4, Section 130) Additions and Alterations No req. Mandatory Controls 130.0, 130.2, 130.4 Mandatory Controls 130.0, 130.2, 130.4 + Performance/Prescriptive
More informationDESCRIPTION & APPLICATION
T5 FME T5 4L - Full Body High Bay DESCRIPTION & APPLICATION The Envirobrite FME T5 fixture is a full body fluorescent high bay ideal for replacing energy devouring HID fixtures. This all aluminum enclosed
More informationMercmaster II HID Luminaires High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS for Use with Threaded Metal Conduit.
UNILETS for Use with Threaded Metal Conduit. Applications Enclosed and gasketed HID lighting fixtures for use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries,
More informationSXPJ SERIES S X azz.com/rigalite
SXPJ SERIES HID Lighting & Compact for Explosion Fluorescent Proof, Lighting Hazardous for and Hazardous Hostile Locations and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division
More informationBavaria Downs. Chaska, MN. Lighting
Bavaria Downs Chaska, MN Lighting Jason Kinsella City View Electric, Inc. 14309 Lake Drive NE Columbus, MN 55025 Phone 651.659.9496 Fax 651.659.0905 cityviewelectric.com DESCRIPTION Lumark The Prevail
More informationLED LINEAR QUICK SUMMARY CO W SI MODEL CORTANA
LED LINEAR CORTANA This simple and elegant suspended LED linear light with wide optics is ideal for general uniform ambient lighting applications where clean, modern architectural design is required. Use
More informationC O N T R A S T NORTH STAR LIGHTING INC. A R C H I T E C T U R A L F L O O D L I G H T S E R I E S
C O N T R A S T A R C H I T E C T U R A L F L O O D L I G H T S E R I E S T h e w i d e s t p o s s i b l e r a n g e o f a r c h i t e c t u r a l f l o o d l i g h t s Versatility - For the first time,
More informationMirroStar HOLOPHANE THE MIRROSTAR LUMINAIRE COMBINES SUPERIOR PERFORMANCE WITH EASE OF MAINTENANCE TO PROVIDE A UNIQUE SOLUTION FOR AREA LIGHTING.
OLOPNE MirroStar TE MIRROSTR LUMINIRE COMBINES SUPERIOR PERFORMNCE WIT ESE OF MINTENNCE TO PROVIDE UNIQUE SOLUTION FOR RE LIGTING. TIS COMBINTION OF PREMIUM OPTICL PERFORMNCE ND DURBLE CONSTRUCTION MKE
More informationKaleidoshade 2 Series
Type No. Catalog No. Job. Name Kaleidoshade 2 Series APPLICATIONS Ideal for restaurants, taverns or nightclubs, food courts, atriums or plazas, malls, retail outlets, stores, athletic clubs and facilities,
More informationP hoenix Products introduced loading dock lighting to the
INDEX PAGE Standard Modular docklite 2-5 Accessories 6 Operating Cost Comparison 7 Impact-Resistant docklite 8 Wet-Location docklite 9 Explosion-Proof docklite 10 Dimensions 11-12 Overhead Pull-down docklite
More informationPaseo. Luminaire CE21T4UF Pole PA40 base cover BD11
Paseo Luminaire CE21T4UF Pole PA40 base cover BD11 CE21T4B Paseo DETAILS With a flat lens design, the PASEO is ideal for modern design applications with light control in mind. The optional Utility Fitter
More informationTWH LED TWP LED TWH TWP LED LED
Familiar Design. New Technology. The and luminaires provide two choices in wall pack construction. The has a die-cast front housing and glass lens while the incorporates a one-piece polycarbonate front
More informationVINCI-LED Wall/Area/Flood Lighting
Job Information Type: VINCI-LED Catalog #: Project: Comments: Prepared by: YEAR WARRANTY WARRANTY TEN INCLUDES LABOR ALLOWANCE Vinci Vinci Large 7⅞ ¼ ⅝ 9¾ ½ ⅛ Applications Wall/Surface Post/Bollard Low
More informationSAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
More information