PATHWAY LIGHTING 3100 SERIES LOUVERED BOLLARD

Size: px

Start display at page:

Download "PATHWAY LIGHTING 3100 SERIES LOUVERED BOLLARD"

Lisa Chandler
5 years ago
Views:

1 PATHWAY LIGHTING 3100 SERIES LOUVERED BOLLARD

The Hydrel 3100 Series Low Level Area Lighting The 3100 Series Bollard provides simplifi ed geometric fms that will both compliment and blend with a variety of architectural settings.

3 The Hydrel 3100 Series Low Level Area Lighting The 3100 Series Bollard provides simplifi ed geometric fms that will both compliment and blend with a variety of architectural settings. Rugged in design and functional in perfmance, these bollards will meet even the most demanding installation requirements. When long term durability and ease of installation is what s needed in a bollard, Hydrel can fi ll the need. Interlocking louvers, extruded aluminum pillar, and welded cast aluminum mounting plates are the key to the 3100 series success. A patented 6-point internal level/mount technology makes the external mounting screws and leveling methods of existing bollards obsolete. A perfmance based louver system utilizing a low glare upper surface combined with a high refl ectance lower surface maximizes light output while reducing offensive glare common in most bollards. 1

PERFORMANCE A remarkable blend of DESIGN + PERFORMANCE makes the 3100 Series Bollard an excellent lighting solution f pathway applications. Light patterns are wide and pleasingly unifm.

Rugged reliability is a Hydrel trademark, and the 3100 Series bollard is no exception.

The 3100 Louver Bollard blends with similar geometric fms as a low level lighting fi xture.

4 PERFORMANCE A remarkable blend of DESIGN + PERFORMANCE makes the 3100 Series Bollard an excellent lighting solution f pathway applications. Light patterns are wide and pleasingly unifm. Structural integrity is unmatched, and the use of superi materials and long-lasting fi nish promises decades of use with minimal maintenance. Rugged reliability is a Hydrel trademark, and the 3100 Series bollard is no exception. The architectural design and customizable aesthetic options combine with the superi optical and mechanical perfmance that Hydrel is known f without compromise. The 3100 Louver Bollard blends with similar geometric fms as a low level lighting fi xture. Superi Perfmance 2 Vandal Resistant Base Extruded aluminum pillar welded to top and bottom plates provide maximum structural integrity. Durable Louver Assembly Interlocking diecast aluminum louvers provide impact resistant assembly. Ease of Installation Removable access do creates easy access to patented 6-point internal level mount system and wire splice make-up. Convenient Ballast Access Ballast lift allows f easy component maintenance and wattage exchange. Increased Efficiency High refl ectance white fi nish on underside of louvers optimizes perfmance and increases pathway light levels. IES Cutoff and Reduced Glare Standard matte black fi nish on topside of louvers creates cutoff distribution and minimizes glare. Optional Fward Throw Distribution Fward throw refl ect redirects backlight increasing perfmance by 50%. Image shows the access do held in place by two allen head screws. Once the do is removed, the mounting bolts, levelers, and wire splice connections can be conveniently accessed. The ballast can be accessed by loosening two bolts located just underneath the lift. Once the bolts are loosened, the ballast tray will slide down into the access do opening f maintenance and/ repair of all components.

Premium m crosion on resistant materials and powder coated fi nishes shrug off environ- mental contamination.

5 DISTRIBUTION Extensive testing assures that aggressive contact by pedestrians will not weaken noticeably damage a 3100 bollard. Directional light patterns can be independently aimed, allowing bollards to be aligned parallel perpendicular to paths and stairways. Premium m crosion on resistant materials and powder coated fi nishes shrug off environ- mental contamination. Even in crosive coastal areas, the 3100 bollard maintains it s iginal appearance over many years of use. Typical Applications FORWARD FT DISTRIBUTION SYMMETRIC SYM DISTRIBUTION S S S STAGGERED ON 12 PATH CENTERED ON 10 PATH Lamp Lumens E min E ave Spacing (S) Lamp Lumens E min E ave Spacing (S) 100HPS fc 6.2 fc 40 ft 100HPS fc 6.0 fc 22 ft 100CMH fc 6.0 fc 40 ft 100CMH fc 5.9 fc 22 ft 100MH fc 5.2 fc 40 ft 100MH fc 5.3 fc 22 ft 70HPS fc 5.5 fc 32 ft 70HPS fc 4.8 fc 18 ft 70CMH fc 5.3 fc 32 ft 70CMH fc 4.8 fc 18 ft 70MH fc 4.3 fc 32 ft 70MH fc 3.8 fc 18 ft 50HPS fc 4.3 fc 24 ft 50HPS fc 3.4 fc 16 ft 50CMH fc 4.3 fc 24 ft 50CMH fc 3.5 fc 16 ft 50MH fc 3.6 fc 24 ft 50MH fc 2.9 fc 16 ft 42TRT fc 3.3 fc 24 ft 42TRT fc 2.7 fc 16 ft 32TRT fc 3.4 fc 20 ft 32TRT fc 2.4 fc 14 ft 26DTT fc 2.8 fc 16 ft 26DTT fc 2.0 fc 12 ft Notes: 1. F wider paths, decrease fi xture spacing. F lower light levels, decrease lamp wattage. 2. To calculate maintained illuminance, multiply values by appropriate light loss fact. 3. All HID lamps are coated. 4. Values shown are f Please visit f complete photometric data. 3

6 SPECIFICATION Dia (229) 9 Dia (229) 8 (203) 8 (203) FIXTURES Available in four different designs. Two standard sizes: 36 w/ 30 light center height and 42 w/ 36 light center height. Two distributions SYM and FT. FT includes a fward throw reﬂect. All standard and custom ﬁnishes are available. DIMENSIONS MATERIALS Premium low copper content A360 alloy die-cast aluminum top housing and louvers. Extruded and tempered aluminum pillar with internal cast aluminum mounting plates. Bosilicate glass lamp enclosure, silicone gasketed. Stainless steel fasteners. FINISH TGIC polyester powder coated in a range of textured semi-matte ﬁnishes. Louvers are powder coated matte black on topside and high reﬂectance white on underside (902) 41.5 (1054) 34 (864) 40 (1016) Light center height 30 (762) 36 (914) 8 (203) 8 (203) 35 (889) 41 (1041) 34 (864) 40 (1016) MOUNTING To ensure structural integrity, the 3100 bollard avoids traditional set-screw mounting. Instead, a heavy duty cast aluminum mounting plate is internally welded to the base. Slotted anch bolt holes and three easily accessible leveling pads allow the luminaire to be installed in perfect alignment. Anch bolt infmation and installation instructions are available at HYDREL PATENTED 6-POINT BOLLARD MOUNTING TYPICAL COMPETITIVE BOLLARD MOUNTING 1 Anch bolt nut and lock washer tightening pre-loads the anch bolts and levelers resulting in a stronger bollard mounting 1 Base casting suspended between nuts and flat washers over anch bolts. No preload on anch bolts. Base plate must be leveled pri to installing fixture post/head 2 Anch bolts, independent of levelers, thru slots in weldedin base plate Bollard post casting resting flush on top of base casting 3 3 Hex socket set screws thru bollard post into base casting 3 Drive on top of leveler allows leveler to be screwed up down 2 4 Concrete foundation 4 Base plate welded to post 5 Hand-hole allows access to levelers, anch bolts, and wiring, enabling entire bollard to be installed as a complete unit Concrete foundation 7 Side loading of bollard base transfers to pre-loaded anch bolts, levelers, and welded base plate. Side loading increases the linear tension on the anch bolts and levelers maintaining a rigid mounting 7 8 Pre-loading of anch bolts in linear tension Pre-loading of levelers in linear compression with concrete foundation 5 Side loading of bollard base transfers to set screws often resulting in set screw and mounting base failures 5 6 Gap between bollard post and concrete foundation allows bollard to be rocked back and fourth Nut and flat washer, top and bottom, levels and suspends base casting

7 3100 ORDERING GUIDE EXAMPLE: S SYM SF LPI DBLB Model Lamp Type Height Voltage Distribution Fluescent 26DTT G24Q-3 32TRT GX24Q-3 42TRT GX24Q-4 MH 50M 1 ED17 Med. 50CM 1 ED17 Med. 70M 1 ED17 Med. 70CM 1 ED17 Med. 100M 1 ED17 Med. 100CM 1 ED17 Med. 35CMT6 T6 G12 70CMT6 T6 G12 20CMT4 T4 G8.5 35CMT4 T4 G8.5 70CMT4 T4 G8.5 HPS 50S 1 E17 Med. 70S 1 E17 Med. 100S 1 E17 Med. LPS 18L 7 T17 BY22D 35L 7 T17 BY22D /277 TB MVOLT 2 Internal SYM Symetrical, 360 FT Fward Throw, 180 Options Fusing SF 3 Single Fuse DF 4 Double Fuse Ballast 5 GEB Generic Electronic Ballast MLEBAD 9 Analog Dimming ELN Ballast Emergency Battery Back-up, Fluescent only. Receptacle GFCI Receptacle DR Duplex Receptacle Lamp LPI 8 Lamp Included LPIC 8 Lamp Included, Coated Finish BL Black BZ Bronze DDB Dark Bronze DNA Natural Alum. GN Green GR Gray SND Sand STG Steel Gray TVG Terra Verde Green WH White CF Custom Finish Optional Louvers Painted 6 /PL Louvers painted to match fixture IEC Listing International Electrotechnical Commission Notes: 1 Will be provided with coated lamps unless LPI is chosen. 2 MVOLT ( ) available with GEB only option with Fluescent lamps. 3 SF is only available with 120, volts on HID only. 4 DF is only available with 208, volts on HID only. 5 GEB & MLEBAD is available with all MH lamps. 6 Louvers will be black unless otherwise specified. 7 Low Pressure Sodium units require larger louver stack. 8 LPIC recommended f all ED17 lamps. LPI recommended f T6, T4 and CFL lamps Volt remote analog dimmer system with additional supply wiring required (by others). Hydrel is an ISO 9001 Certified Manufacturer CERTIFICATIONS UL CUL LISTED WET LOCATIONS I.E.S. CUTOFF 5

12881 Bradley Avenue, Sylmar, CA 91342 T 818.362.

hydrel.com Fm No. 106.28 5/06 2006 Acuity Brands, Inc.

PRECISION ARCHITECTURAL LIGHTING 8000 SERIES

PRECISION ARCHITECTURAL LIGHTING 8000 SERIES PRECISION, POWER AND PERFORMANCE. Expertise in sealing technology and heat transfer provides compact, high-wattage luminaries with the highest ingress protection