304 Series LED Recessed Canopy Luminaires

Transcription

1 CAN-304-PS-RS " 6.6" [ 155mm ] [ 169mm ] Notes: 14.0" SQ [ 356mm ] Cut Out Luminaire Clearance Product Family Optic Mounting # of LEDs LED Voltage Color Drive Factory-Installed Options ( x 10 ) Series Options Please type additional options in manually on the lines provided above. CAN 304 PS 1 RS D U V SV Silver BZ BK Black WH White PB Platinum mA (Standard) mA mA 43K 4300K Color Temperature 4 DIM 0 10V Dimming 5,6,7 F Fuse 8 ML Multi-Level (75/525) 9 Footnotes 1. Petroleum symmetric distribution 2. Recessed mount for single skin canopies 3. Requires marked spacing 48 x 24 x 3 (48 luminaire to luminaire, 24 luminaire to side wall, 6 above luminaire 4. Color temperature per fixture; minimum 70 CRI 5. Consult facoty for availability 6. Control by others 7. Refer to the 304 series dimming spec sheet for availability and additional information 8. When code dictates fusing use time delay fuse 9. Refer to 304 Multi-Level spec sheet for availability and additional information. # of LEDs Lumens Petroleum 6000K B U G Lumens Petroleum 4300K LED PERFORMANCE SPECS B U G System Watts V L 70 Hours 25º C (77º F) Rating ** Rating ** 350mA Fixture Operating at 25º C (77º F) 40 4,696 (04) ,328 (04) >150, ,937 (06) ,394 (06) >150, mA Fixture Operating at 25º C (77º F) 40 6,575 (04) ,060 (04) >150,000 50K Hours Lumen Maintenance 15º C (59º F) 60 9,712 (06) ,951 (06) , mA (Standard) Fixture Operating at 25º C (77º F) 40 7,984 (04) ,358 (04) ,000 91% 60 11,794 (06) ,902 (06) ,000 * For recommended lumen depreciation data see TD-13 ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit 94% 93%

2 CAN-304-PS-RS General Description Slim, low profile design. Fixture is constructed from rugged die-cast and extruded aluminum components. LED driver is mounted in a sealed weather-tight center chamber that allows for access from below the fixture. High performance heatsinks specifically designed for LED canopy application. Luminaire mounts directly to the canopy deck and is secured in place with die-cast aluminum trim frame. Luminaire housing is provided with factory applied foam gasket and provides for a watertight seal between luminaire housing and canopy deck. Suitable for use in single skin canopies with 16 (406 mm) wide panels. See 227 Series for canopies using 12 deck sections. Designed for canopies of gauge (maximum [1 mm] thickness). Five year limited warranty on luminaire. Electrical Modular design accommodates varied lighting output from high power, white, 6000K (+/- 500k per full fixture), minimum 70 CRI, long life LED sources. Optional 4300K (+/-300K per full fixture) also available V 50/60 Hz, Class 1 LED drivers are standard. LED drivers have power factor >90% and THD <20% at full load. Units provided with integral 10kV surge suppression protection standard. Surge protection tested in accordance with IEEE C and ANSI standard Testing & Compliance UL listed in the US and Canada for wet locations and enclosure classified IP66 per IEC 529. Consult factory for CE certified product. Dark Sky Friendly. IDA Approved. RoHS Compliant. Product with petroleum symmetric optic and sparkle petroleum optics qualified on the Design Lights Consortium ( DLC ) Qualified Products List ( QPL ) Finish Exclusive Colorfast DeltaGuard finish on all cast aluminum components, features an E-Coat epoxy primer with an ultra-durable white powder topcoat. Provides excellent resistance to corrosion, ultraviolet degradation and abrasion. Clear anodized finish on extruded aluminum heat sink with white powder finish on all cast aluminum components is standard., black, silver and platinum bronze powder topcoats are also available. The finish is covered by our 10 year warranty. Fixture and finish are endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117. Photometrics horizontal angle ITL Candlepower trace of 6000K, 60 LED petroleum symmetric 304 series parking structure luminaire with 12,214 initial delivered lumens operating at 700mA. All published luminaire photometric testing performed to IESNA LM standards. 5' 5' 45º 5' m 5' CURB LINE 0m Isofootcandle plot of 6000K, 60 LED petroleum symmetric 304 series parking structure luminaire at 15 A.F.G. Luminaire with 11,828 initial delivered lumens operating at 700mA. Initial FC at grade. Patents U.S. and international patents granted and pending. BetaLED is a division of Ruud Lighting, Inc. For a listing of Ruud Lighting, Inc. patents, visit Field-Installed Accessories Retrofit kits available. Please consult factory for details.

3 CAN-304-SL-RS " 6.6" [ 155mm ] [ 169mm ] Notes: 14.0" SQ [ 356mm ] Cut Out Luminaire Clearance Product Family Optic Mounting # of LEDs LED Voltage Color Drive Factory-Installed Options ( x 10 ) Series Options Please type additional options in manually on the lines provided above. CAN 304 SL 1 RS D U V SV Silver BZ BK Black WH White PB Platinum mA (Standard) mA mA 43K 4300K Color Temperature 4 DIM 0 10V Dimming 5,6,7 F Fuse 8 ML Multi-Level (75/525) 9 Footnotes 1. Petroleum Symmetric distribution 2. Recessed mount for single skin canopies 3. Requires marked spacing 48 x 24 x 3 (48 luminaire to luminaire, 24 luminaireto side wall, 6 above luminaire 4. Color temperature per fixture; minimum 70 CRI 5. Control by others 6. Refer to the 304 series dimming spec sheet for availability and additional information 7. Can t exceed specified drive current. Consult factory if exceeding drive current is necessary. 8. When code dictates fusing use time delay fuse 9. Refer to the 304 SeriesMulti-Level spec sheet for availability and additional information. # of LEDs Lumens Sparkle 6000K B U G Lumens Sparkle 4300K LED PERFORMANCE SPECS B U G System Watts V L 70 Hours 25º C (77º F) Rating *** Rating *** 350mA Fixture Operating at 25º C (77º F) 40 4,593 (04) ,192 (04) >150, ,711 (06) ,204 (06) >150, mA Fixture Operating at 25º C (77º F) 40 6,361 (04) ,869 (04) >150, ,396(06) ,685 (06) , mA (Standard) Fixture Operating at 25º C (77º F) 40 7,724 (04) ,127 (04) , ,409 (06) ,546 (06) ,000 50K Hours Lumen Maintenance 15º C (59º F) * For recommended lumen depreciation data see TD-13 ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit 94% 93% 91%

4 CAN-304-SL-RS General Description Slim, low profile design. Fixture is constructed from rugged die-cast and extruded aluminum components. LED driver is mounted in a sealed weather-tight center chamber that allows for access from below the fixture. High performance heatsinks specifically designed for LED canopy application. Luminaire mounts directly to the canopy deck and is secured in place with die-cast aluminum trim frame. Luminaire housing is provided with factory applied foam gasket and provides for a watertight seal between luminaire housing and canopy deck. Suitable for use in single skin canopies with 16 (406 mm) wide panels. See 227 Series for canopies using 12 deck sections. Designed for canopies of gauge (maximum [1 mm] thickness). Five year limited warranty on luminaire. Electrical Modular design accommodates varied lighting output from high power, white, 6000K (+/- 500k per full fixture), minimum 70 CRI, long life LED sources. Optional 4300K (+/-300K per full fixture) also available V 50/60 Hz, Class 1 LED drivers are standard. LED drivers have power factor >90% and THD <20% at full load. Units provided with integral 10kV surge suppression protection standard. Surge protection tested in accordance with IEEE C and ANSI standard Testing & Compliance UL listed in the US and Canada for wet locations and enclosure classified IP66 per IEC 529. Consult factory for CE certified product. Dark Sky Friendly. IDA Approved. RoHS Compliant. Product with petroleum symmetric optic and sparkle petroleum optics qualified on the Design Lights Consortium ( DLC ) Qualified Products List ( QPL ) Finish Exclusive Colorfast DeltaGuard finish on all cast aluminum components, features an E-Coat epoxy primer with an ultra-durable white powder topcoat. Provides excellent resistance to corrosion, ultraviolet degradation and abrasion. Clear anodized finish on extruded aluminum heat sink with white powder finish on all cast aluminum components is standard., black, silver and platinum bronze powder topcoats are also available. The finish is covered by our 10 year warranty. Fixture and finish are endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117. Photometrics 5' 5' 45º 5' 0m CURB LINE ' 0m 90º Patents U.S. and international patents granted and pending. BetaLED is a division of Ruud Lighting, Inc. For a listing of Ruud Lighting, Inc. patents, visit 90º Field-Installed Accessories Retrofit kits available. Please consult factory for details. Isofootcandle plot of 6000K, 60 LED Type V Short 304 series canopy luminaire at 15 A.F.G. Luminaire with 11,409 initial delivered lumens operating at 700mA. Initial FC at grade. 30º horizontal angle ITL Candlepower trace of 6000K, 60 LED Sparkle Petroleum luminaire with 11,973 initial delivered lumens operating at 700mA. All published luminaire photometric testing performed to IESNA LM standards.

5 ARE-EDG-3M-DA THE EDGE LED Area Light Type III Medium Rev. Date: 8/23/11 Notes: 3.9" [100mm] 27.1" [817.88mm] 18.1" [589.28mm] 2.1" [53mm] 9.0" [228.6mm] A Optional Photocell Receptacle Location Convenient, Interlocking Mounting Method # of LEDs Dim. A 12.06" [306mm] 12.06" [306mm] 14.06" [357mm] 16.06" [408mm] 18.06" [459mm] 20.06" [510mm] 22.06" [560mm] 24.06" [611mm] 28.06" [713mm] 32.06" [814mm] Product Family Optic Mounting # of LEDs LED Voltage Color Drive Factory-Installed Options ( x 10 ) Series Options Not Field Adjustable Please type additional options in manually on the lines provided above. ARE EDG 3M 1 3MB 2 DA D UL V UH V V SV Silver BK Black BZ PB Platinum WH White mA mA mA 43K 4300K Color Temperature 6 DIM 0 10V Dimming 7,8,9 F Fuse 10,11,12 HL Hi/Low (175/350/525, dual circuit input) 13 P Photocell 12,14 R NEMA Photocell Receptacle 12,15,16 ML Multi-Level (75/525) 13 Footnotes 1. IESNA Type III Medium distribution 2. IESNA Type III Medium distribution w/ backlight control 3. Direct mounting arm for use with 3 6" (76 152mm) square or round pole 4. Available on fixtures with LEDs 5. Available on fixtures with LEDs 6. Color temperature per fixture; 6000K standard; minimum 70 CRI 7. Control by others 8. Refer to dimming spec sheet for availability and additional information 9. Not available when UH voltage is selected 10. When code dictates fusing use time delay fuse 11. Not available with all multi-level options. Refer to the multi-level spec sheet for availability and additional information 12. Refer to multi-level spec sheet for availability and additional information 13. Must specify voltage other than UH 14. Intended for horizontal mounting 15. Photocell by others # of LEDs Lumens Type III 6000K B U G Lumens Type III Medium w/ backlight 6000K B U G Lumens Type III 4300K B U G LED PERFORMANCE SPECS Lumens Type III Medium w/ backlight 4300K B U G System Watts V Rating ** Rating ** Rating ** Rating ** 350mA Fixture Operating at 25º C (77º F) 20 1,814 (02) ,342 (02) ,672 (02) ,237 (02) >150, ,628 (04) ,683 (04) ,343 (04) ,473 (04) >150, ,371 (06) ,973 (06) ,950 (06) ,662 (06) >150, ,161 (08) ,298 (08) ,600 (08) ,882 (08) >150, ,929 (10) ,605 (10) ,230 (10) ,088 (10) >150, ,715 (12) ,926 (12) ,876 (12) ,305 (12) >150, ,444 (14) ,205 (14) ,469 (14) ,484 (14) , ,222 (16) ,520 (16) ,108 (16) ,696 (16) , ,778 (20) ,151 (20) ,385 (20) ,120 (20) , ,333 (24) ,781 (22) ,662 (24) ,544 (24) , mA Fixture Operating at 25º C (77º F) 20 2,539 (02) ,878 (02) ,340 (02) ,731 (02) , ,079 (04) ,757 (04) ,681 (04) ,462 (04) , ,520 (06) ,562 (06) ,930 (06) ,127 (06) , ,026 (08) ,417 (08) ,240 (08) ,835 (08) , ,501 (10) ,247 (10) ,521 (10) ,523 (10) , ,001 (12) ,097 (12) ,826 (12) ,227 (12) , ,422 (14) ,888 (14) ,057 (14) ,878 (14) , ,911 (16) ,729 (16) ,351 (16) ,575 (16) , mA Fixture Operating at 25º C (77º F) 20 3,102 (02) ,281 (02) ,858 (02) ,102 (02) , ,203 (04) ,562 (04) ,717 (04) ,204 (04) , ,185 (06) ,754 (06) ,465 (06) ,225 (06) ,000 * For recommended lumen maintenance factor data see TD-13 ** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit 480V L 70 Hours 25º C (77º F) 50K Hours Lumen Maintenance Factor 15º C (59º F) 93% 92% 90%

6 ARE-EDG-3M-DA General Description Slim, low profile design minimizes wind load requirements. Fixture sides are rugged cast aluminum with integral, weather-tight LED driver compartments and high performance aluminum heatsinks. Convenient, interlocking mounting method. Mounting housing is rugged die cast aluminum and mounts to 3 6" (76 152mm) square or round pole. Fixture is secured by two (2) 5/16-18 UNC bolts spaced on 2" (51mm) centers. Includes leaf/debris guard. Five year limited warranty on fixture. THE EDGE LED Area Light Type III Medium Rev. Date: 8/23/11 Testing & Compliance UL listed in the U.S. and Canada for wet locations and enclosure rated IP66 per IEC when ordered without P or R options. Consult factory for CE Certified products. Certified to ANSI C , 3G bridge and overpass vibration standards. Dark Sky Friendly. IDA Approved. RoHS Compliant. Electrical Modular design accommodates varied lighting output from high power, white, 6000K (+/- 500K per full fixture), minimum 70 CRI, long life LED sources. Optional 4300K (+/- 300K per full fixture) also available V 50/60 Hz, Class 1 LED drivers are standard V 50/60 Hz driver is optional. LED drivers have power factor >90% and THD <20% at full load. Units provided with integral 10kV surge suppression protection standard. Integral weather-tight electrical box with terminal strips (12Ga - 20Ga) for easy power hook-up. Surge protection tested in accordance with IEEE/ANSI C Product qualified on the Design Lights Consortium ("DLC") Qualified Products List ("QPL") when ordered without backlight control shield. Finish Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultradurable silver powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion., black, white and platinum bronze powder topcoats are also available. The finish is covered by our 10 year limited warranty. Fixture and finish are endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117. Field-Installed Accessories Bird Spikes XA-BRDSPK Patents U.S. and international patents granted and pending. BetaLED is a division of Ruud Lighting, Inc. For a listing of Ruud Lighting, Inc. patents, visit Photometrics horizontal angle ITL Candlepower trace of 4300K, 160 LED Type III Medium area luminaire with 18,862 initial delivered lumens operating at 525mA. All published luminaire photometric testing performed to IESNA LM standards º CURB LINE m Isofootcandle plot of 4300K, 120 LED Type III Medium area luminaire at (m) A.F.G. Luminaire with 13,826 initial delivered lumens operating at 525mA. Initial FC at grade. 0m THE EDGE EPA & Weight Calculations Approximate # of Weight 2@ 2@ 3@ 4@ LEDs V 1 Single 180º 90º 90 90º Fixed Arm Mount lbs. (9.5kg) lbs. (10.8g) lbs. (12.3kg) lbs. (12.8kg) lbs. (14.7kg) lbs. (15.2kg) lbs. (16.7kg) lbs. (18.8kg) lbs. (19.6kg) n/a 2 n/a 2 n/a lbs. (21.7kg) n/a 2 n/a 2 n/a 2 1. Add 5 lbs. (2.3kg) for transformer in V fixtures when multi-level options are selected. 2. For applications requiring 200 or more LEDs at 90 degrees refer to the DL mount version of our spec sheet º 90º º m 4 CURB LINE m º horizontal angle of maximum 30º candlepower. ITL Candlepower trace of 4300K, 40 LED Type III Medium w/ backlight control area luminaire with 5,084 initial delivered lumens operating at 525mA. All published luminaire photometric testing performed to IESNA LM standards. Isofootcandle plot of 4300K, 120 LED Type III Medium area luminaire at (m) A.F.G. Luminaire with 10,227 initial delivered lumens operating at 525mA. Initial FC at grade.