304 Series LED Recessed Canopy Luminaire

Transcription

1 304 Series LED Recessed Canopy Luminaire Product Description Luminaire housing is constructed from rugged die cast aluminum components (RS Mount) or die cast and extruded aluminum components (RD Mount). LED driver is mounted in a sealed weathertight center chamber that allows for access from below the fixture. Luminaire mounts directly to the canopy deck and is secured in place with die cast aluminum trim frame. Luminaire housing is provided with factory applied foam gasket that provides a watertight seal between luminaire housing and canopy deck. Suitable for use in single or double skin canopies with 6" (406 mm) wide panels. Designed for canopies of 9- gauge (maximum 0.040" [ mm] thickness). Applications: Petroleum stations, convenience stores, drive-thru banks and restaurants, retail and grocery RS Mount Performance Summary Patented NanoOptic Product Technology Made in the U.S.A. of U.S. and imported parts CRI: Minimum 70 CRI 4"SQ (356mm) CCT: (+/- 300K), (+/- 500K) standard Limited Warranty : 0 years on luminaire/0 years on Colorfast DeltaGuard finish See for warranty terms Accessories Field-Installed Hand-Held Remote XA-SENSREM - For successful implementation of the programmable multi-level option, a minimum of one hand-held remote is required." (56mm) 8.7" (m) 9.6" (44mm) Multi-level Sensor location (ordered as an option)." (56mm) 8.7" (m) 9.6" (44mm) Weight.0 lbs. (9.9kg) Ordering Information Example: CAN-304-5M-RS-04-E-UL-SV-350 CAN-304 E Product Optic Mounting Series Voltage Color Options Drive Current Options CAN-304 5M Type V Medium 5S Type V Short PS Petroleum Symmetric SL Sparkle Petroleum RS Recessed Single Skin RD Recessed Double Skin E UL Universal 0-77V UH Universal V BK Black BZ Bronze SV Silver WH White * DIM 0-0V Dimming --Control by others --Refer to Dimming spec sheet for details --Can't exceed specified drive current F Fuse --When code dictates fusing use time delay fuse --Refer to ML spec sheet for availability with ML options ML Multi-Level --Refer to ML spec sheet for details PML Programmable Multi-Level --Refer to PML spec sheet for details 40K Color Temperature --Minimum 70 CRI --Color temperature per luminaire * 60 LED luminaire requires marked spacing: 48" x 4" x 6" (,9mm x 6m x 5mm); 48" (,9mm) center-to-center of adjacent luminaires, 4" (6m) luminaire center to side building member, 6" (5mm) top of luminaire to overhead building member Rev. Date: V 07/8/06 US: lighting.cree.com/lighting T (800) F (6)

2 Product Specifications CONSTRUCTION & MATERIALS RS Mount luminaire housing is constructed from rugged die cast aluminum and incorporates integral, high performance heatsink fins specifically designed for LED canopy applications RD Mount luminaire housing is constructed from rugged die cast aluminum and features high performance extruded aluminum heatsinks specifically designed for LED canopy applications LED driver is mounted in a sealed weathertight center chamber that allows for access from below the luminaire Field adjustable drive current between, and on Non-IC rated luminaires Luminaire housing provided with factory applied foam gasket and provides for a watertight seal between luminaire housing and canopy deck Mounts directly to the canopy deck and is secured in place with a die cast aluminum trim frame RS mount includes integral junction box which allows ease of installation without need to open luminaire Suitable for use in single (RS Mount) or double (RD Mount) skin canopies with 6" (406mm) wide panels Designed for canopies of 9- gauge (maximum 0.040" [mm] thickness) See 8 Series canopy luminaires for canopies using " (305mm) deck sections Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver, and white are available ELECTRICAL SYSTEM Input Voltage: 0-77V or V, 50/60Hz, Class drivers Power Factor: > 0.9 at full load Total Harmonic Distortion: < 0% at full load Integral weathertight electrical box with terminal strips (Ga-0Ga) for easy power hookup Integral 0kV surge suppression protection standard To address inrush current, slow blow fuse or type C/D breaker should be used 0V Source Current: 0.5mA REGULATORY & VOLUNTARY QUALIFICATIONS culus Listed Suitable for wet locations Meets FCC Part 5 standards for conducted and radiated emissions Enclosure rated IP66 per IEC kV surge suppression protection tested in accordance with IEEE/ANSI C6.4. Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 7 DLC qualified when ordered with PS or SL optics and 55 or drive current. Please refer to for most current information RoHS Compliant. Consult factory for additional details Meets Buy American requirements within ARRA Electrical Data* System Watts 0-480V Total Current 0V 08V 40V 77V 347V 480V * Electrical data at 5 C (77 F) Recommended 304 Series Lumen Maintenance Factors () Ambient 5K hr Projected 50K hr Projected 75K hr Calculated 3 5 C (4 F) C (50 F) C (59 F) C (68 F) C (77 F) K hr Calculated 3 Lumen maintenance values at 5 C are calculated per TM- based on LM-80 data and in-situ luminaire testing In accordance with IESNA TM--, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) 3 In accordance with IESNA TM--, Calculated Values represent time durations that exceed six times (6X) the IESNA LM total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip) US: lighting.cree.com/lighting T (800) F (6)

3 Photometry All published luminaire photometric testing performed to IESNA LM standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: 5M Type V Medium Distribution horizontal angle of maximum 30º candlepower ,600 B3 U G 4,777 B3 U G ITL Test Report #: 7785 PKG-304-5M-**-06-E-UL K Lumens:,68 CAN-304-5M-**-06-E-UL K Mounting Height: 5' (4.6m) Lumens:,63 FC at grade 06 6,83 B3 U G 7,094 B3 U G 04 6,44 B3 U G 6,688 B3 U G 06 9,563 B3 U G 9,93 B3 U G 04 7,8 B3 U G 8, B3 U G 06,63 B4 U G,059 B4 U G * delivered lumens at 5 C (77 F) ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: 5S Type V Short Distribution horizontal angle of maximum 30º candlepower. 04 5, B U G 5,308 B U G ITL Test Report #: PKG-304-5S-**-06-E-UL K Lumens:,738 CAN-304-5S-**-06-E-UL K Mounting Height: 5' (4.6m) Lumens:,903 FC at grade 06 7,590 B3 U G 7,88 B3 U G 04 7,56 B3 U G 7,43 B3 U G 06 0,66 B3 U G,035 B3 U G 04 8,690 B3 U G 9,04 B3 U G 06,903 B3 U G 3,399 B4 U G * delivered lumens at 5 C (77 F) ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: US: lighting.cree.com/lighting T (800) F (6)

4 Photometry All published luminaire photometric testing performed to IESNA LM standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: PS Petroleum Symmetric Distribution 357 horizontal angle ,5 B U0 G0 5,46 B U0 G0 ITL Test Report #: CAN-304-PS-**-06-E-UL K Lumens: 3,58 CAN-304-PS-**-06-E-UL K Mounting Height: 5' (4.6m) Lumens: 3,90 FC at grade 06 7,759 B3 U0 G0 8,057 B3 U0 G0 04 7,35 B3 U0 G0 7,597 B3 U0 G0 06 0,86 B3 U0 G0,80 B3 U0 G0 04 8,883 B3 U0 G0 9,5 B3 U0 G0 06 3,90 B3 U0 G0 3,697 B3 U0 G0 * delivered lumens at 5 C (77 F) ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: SL Sparkle Petroleum Distribution horizontal angle ,055 B U0 G 5,49 B U0 G ITL Test Report #: 7745 CAN-304-SL-**-06-E-UL K Lumens:,707 CAN-304-SL-**-06-E-UL K Mounting Height: 5' (4.6m) Lumens:,760 FC at grade 06 7,506 B U0 G 7,794 B3 U0 G 04 7,077 B U0 G 7,349 B U0 G 06 0,508 B3 U0 G 0,9 B3 U0 G 04 8,593 B3 U0 G 8,94 B3 U0 G 06,760 B3 U0 G 3,50 B3 U0 G * delivered lumens at 5 C (77 F) ** For more information on the IES (Backlight-Uplight-Glare) Rating visit: US: lighting.cree.com/lighting T (800) F (6)

5 RD Mount Weight 4.0"SQ (356mm) (3mm).0" (305mm) (3mm) (3mm).0 lbs. (9.9kg) Cut Out Dimensions.0" (305mm) " (55mm) 6.6" (69mm) (3mm) Luminaire Clearance Dimensions Multi-level Sensor location (ordered as an option) 06 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. Content is subject to change. Patent Cree, NanoOptic, and Colorfast DeltaGuard are registered trademarks, and the Cree logo, 8 Series, and 304 Series are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC. The DLC QPL is a registered trademark of Northeast Energy Efficiency Partnerships, Inc. US: lighting.cree.com/lighting T (800) F (6) Canada: T (800) F (800)