Landscape LED 12V/120V/277V. LED Collection. Outdoor Landscape Luminaires. All-Inclusive LED Collection

Transcription

1 Landscape LED //277V LED Collection Outdoor Landscape Luminaires All-Inclusive LED Collection

2 LED Collection STEP LIGHTS Round Rectangle IN-GRADE UPLIGHTS Minivault Lightvault ACCENT FLOOD MicroFlood Scarab ACCENT PATH Ravenna Traditional BELL LANDSCAPE Wall Mount Stem Scroll MOUNTING OPTIONS DISTRIBUTION PATTERNS LED SPECIFICATION GUIDE Printed in U.S.A Version 1.2 (3/10) KIM LIGHTING

3 All-Inclusive LED Collection Kim Lighting s LED Landscape Collection Until now, the low power consumption and limited output of early generation light emitting diodes were typically only applied for observable decorative or indicative uses, capitalizing on the rainbow hues and programming abilities that are advantageous for entertainment venues, traffi c signals, signage, and ornamental elements. In fact, it was often said, LEDs are meant to be seen, not seen by. However, with the recent development of new super-bright white diodes and other performance improvements, the acceptability of LEDs for mainstream uses has grown exponentially. Halogen LED Savings Guide Light Source Type Distribution Hours of Operation Light Source Watts Total System Watts PAR30 1 Narrow Flood 4, watts 50 watts LED Narrow Flood 50,000 9 watts 15 watts 1 Values are based on Philips model PAR30S specifi cation data. Always consult manufacturer s technical specifi cation sheet for the most current product information. Comparison is based on Kim Lighting s models EL730 (HAL) and EL733 (LED). OVER 70% ENERGY SAVINGS... OVER 80% LONGER LIFE. KIM LIGHTING 1

4 LED Technology 80 Light Source Comparison LUMENS PER WATT Incandescent HAL CFL LED When comparing light sources, always consult manufacturers specifi cation data. Selecting LEDs for your project is not enough Long life sources require long life housings to justify their investment even more so for LEDs. New solid-state lighting technology requires advanced heat dissipation, innovative optical control, and rugged luminaire construction to truly realize its promise. Kim Lighting s new collection of premium,, and 277V LED landscape luminaires exceeds these requirements with a full line of extreme-duty, high performance solutions. Rugged and Reliable LED technology offers several advantages over conventional sources such as incandescent or fl uorescent. First, LEDs offer much longer life and endurance as they do not employ breakable heated fi laments or gas fi lled glass enclosures to generate illumination. LEDs are less affected by ambient temperatures, and can perform at their peak in harsh conditions. Also, their compact circuit board construction and small enclosure makes them much more durable for rugged outdoor installations. Since the longer life of LEDs demand fi xtures that stand the test of time, Kim quality and LEDs are a perfect combination. Affordable Advantages Until recently, Solid State Lighting devices were too expensive for most lighting applications because they are built from advanced semiconductor materials. The prices of these components have signifi cantly declined, making LEDs a more cost-effective solution for a wider range of applications. KIM LIGHTING 2

5 All-Inclusive LED Collection Capitalizing on the Newest SSL Technology The latest advances in LED technology, or Solid State Lighting, have evolved a once niche, chromatic, inadequate device into, now, a powerful, practical, directional source for effective accent and general illumination. Where once only halogen or fl uorescent lamps could provide the lumen output, color rendering, and effi cacy for certain applications, LEDs are now available with these important attributes, as well as added benefi ts of very long life, low heat generation, and durability never before combined in any other source. Effi ciency Leader A primary advantage of new LED technology is effi ciency. Conventional light-emitting processes involve generating excess heat or exciting gasses to obtain effective light levels. These processes waste signifi cant energy because a huge portion of input electricity is not directed toward producing visible light. LEDs, however, employ a non-toxic chemical interaction that generates very little heat so a much higher percentage of the electrical demand is utilized toward light production, which cuts down on overall power consumption considerably. Benefi ts: Premium LED lighting solutions offer 50,000+ hours of illumination* Perfect for residential, small and large commercial spaces, even indoor atriums Simple installation does not require an electrician Unrivaled quality by leading outdoor lighting manufacturer Fully replaceable LED boards 3-year limited manufacturer s warranty; 25-years on brass and copper products UL Listed for maximum safety * Hours of operation are contingent on outdoor ambient temperature. See product specfi cation data at KIM LIGHTING 3

6 All-Inclusive LED Collection Fixture Model Finish Ordering Example: EL817 / 5LED120 / DB Step Light LED Round KLV817 / EL817 //277V or 1 Die-Cast Aluminum Wall, Step, Porch Lighting NEW KLV817 SPECIFICATIONS HOUSING: Die-cast low copper alloy aluminum with clear anodized fi nish. Two K" NPT in sides. Housing mounts into concrete, brick, or masonry (non-combustible materials). Internal splice area provided behind lamp plate. LENS FRAME: Die-cast aluminum, with silicone gasket, attaches to housing with two captive stainless steel, hex socket cap screws. LENS: Tempered prismatic glass with silicone gasket, concealed above lens frame opening. TRANSFORMER: KLV817 requires remote transformer. OPTICAL SYSTEM KLV817: A total of 3 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver. EL817: A total of 3 or 9 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver. DRIVER KLV817: Constant current electronic driver. Rated for 5 watts. Available in input. -40ºF. starting temperature. All drivers are Underwriters Laboratories recognized. EL817: Constant current electronic driver. Available in or 277V input. -40 F. starting temperature. All drivers are Underwriters Laboratories recognized. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. NOTE: The driver can be dimmed with an off-the-shelf phase control line dimmer (SCR/TRIAC style). For complete photometric and specification data, log onto STEP LIGHT ROUND ORDERING INFORMATION 1 Fixture 2 Model 3 Finish (See p.19 for reference) KLV817 5LED12 1 BL Black DB Dark Bronze EL817 5LED120 GR Verde Green 15LED120 15LED277 Dimensions Distribution Pattern: L" (19 mm) 5" (127 mm) 6" DIA. (152 mm) O" (21 mm) 2M" (58 mm) 4" (102 mm) (A) K" NPT D" (16 mm) KLV817, EL817 KIM LIGHTING 4

7 Fixture Model Finish Ordering Example: EL807 / 5LED120 / DB All-Inclusive LED Collection Step Light LED Rectangle KLV807 / EL807 //277V or 1 Die-Cast Aluminum Wall, Step, Porch Lighting SPECIFICATIONS HOUSING: Die-cast low copper alloy aluminum with clear anodized fi nish. Two K" NPT in sides. Housing mounts into concrete, brick, or masonry (non-combustible materials). Internal splice area provided behind lamp plate. LENS FRAME: Die-cast aluminum, with silicone gasket, attaches to housing with two captive stainless steel, hex socket cap screws. LENS: Tempered prismatic glass with silicone gasket, concealed above lens frame opening. TRANSFORMER: KLV807 requires remote transformer. OPTICAL SYSTEM KLV807: A total of 3 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver. EL807: A total of 3 or 9 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver. DRIVER KLV807: Constant current electronic driver. Rated for 5 watts. Available in input. -40ºF. starting temperature. All drivers are Underwriters Laboratories recognized. EL807: Constant current electronic driver. Available in or 277V input. -40 F. starting temperature. All drivers are Underwriters Laboratories recognized. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. NOTE: The driver can be dimmed with an off-the-shelf phase control line dimmer (SCR/TRIAC style). For complete photometric and specification data, log onto NEW KLV807 STEP LIGHT RECTANGLE ORDERING INFORMATION 1 Fixture 2 Model 3 Finish (See p.19 for reference) KLV807 5LED12 1 BL Black DB Dark Bronze EL807 5LED120 GR Verde Green 15LED120 15LED277 Distribution Pattern: Dimensions 9C" (238 mm) L" (19 mm) 3L" (95 mm) L" (19 mm) 1M" (33 mm) (A) 3K" (89 mm) K" NPT 2D" (67 mm) 4K" (114 mm) 7B" (18 mm) KLV807, EL807 KIM LIGHTING 5

8 All-Inclusive LED Collection Fixture Model Finish Accessories Ordering Example: KLV366 / 5LED12 / DB / HL Minivault LED KLV361 / KLV366 / LTV765 / LTV767 / LTV768 //277V /6W/1 Die-Cast Brass & Aluminum Housing In-Grade, Up Lighting NEW KLV361, KLV366, LTV765 LTV767 shown with optional SS60 stainless steel lens ring SPECIFICATIONS HALF SHIELD LENS RING KLV361/LENS RING KLV366: Die-cast low copper alloy aluminum. LENS RING LTV765/767/768: Die-cast brass with natural fi nish or optional stainless steel. Five captive J" blackened stainless steel hex-socket cap screws. LENS: Clear tempered soda lime, F" thick, fl ush with lens ring, slightly crowned. LENS GASKET: One-piece molded silicone, U-channel wraps completely around lens fl ange. HOUSING: Cast aluminum or cast brass. BRACKET: Mounted on yoke providing ±15 vertical adjustment and 340 rotation, locking screws, stainless steel gimble ring. CABLE: 6 # Volt cable with fork connector, sealed entry into body with anti-siphon plug. INTEGRAL JUNCTION BO: Die-cast brass with stainless steel fl at head slotted screws and molded silicone gasket. Die-cast internal Junction Box cover with silicone gasket and anti-siphon plug, two K" NPT taps in bottom, 12 cu in. volume. OPTICAL SYSTEM KLV361/366/LTV765: A total of 3 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). LTV767: 6 LED emitters confi gured in a circular array, mounted on yoke providing ±15 vertical adjustment and 340 rotation, with locking screws. Available in Cool White (approx K). LTV768: A total of 3 or 9 LED emitters configured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic drivers. DRIVER KLV361/366/LTV765: Constant current electronic driver. Rated for 5 watts. Available in input. -40ºF. starting temperature. LTV767: Electronic driver. Rated for 6 watts. Available in input. -40 F. starting temperature. LTV768: Constant current electronic driver. Available in or 277V input. -40 F. starting temperature. All drivers are Underwriters Laboratories recognized. WIRING: Anti-siphon barrier on wiring to and from splice compartment. All components wire linked for ground, quick-disconnect for removal of optical system. DISTRIBUTION: For LTV767, specify SP for spot distributions, specify NF for narrow fl ood distributions. LTV768 available in WF distribution only. NOTE: The driver can be dimmed with an off-the-shelf phase control line dimmer (SCR/TRIAC style). CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. For complete photometric and specification data, log onto MINIVAULT ORDERING INFORMATION 1 Fixture 2 Model 3 Finish (See p.19 for reference) KLV361 Wide Flood 5LED12 BL Black Alum. KLV366 Wide Flood DB Dark Bronze Alum. GR Verde Green Alum. LTV76F Wide Flood 5LED12 Brass LTV767SP Spot 6LED120 Brass LTV767NF Narrow Flood LTV768WF Wide Flood 5LED120 Brass 5LED277 15LED120 15LED277 Distribution Patterns: (WF) (NF) (SP) 4 Accessories HS60 Half Shield lens ring, die-cast brass only. HL73 Hex Cell Louver 6" DIA. (152 mm) OPTION A-PC2(): Built in photocell sensor mounted inside enclosure, (See page 20). Optical Adjustment " " " (15 mm) (15 mm) (15 mm) " " 3" 71 32" (76 mm) (178 mm) Low Voltage Cable Exit 6J" DIA. (16 mm) RG60 Rock Guard lens ring, cast-bronze only. Colored Lens: Consult factory Dimensions SL73 Spread Lens Low Voltage Cable Exit 6J" DIA. (16 mm) SS60 Stainless steel lens ring, brushed. 1 PL73 Prismatic Lens TR60 Trim Ring for flush mounting in concrete, brass. 1K" (38 mm) (2) K" NPT 1D" (41 mm) 6J" DIA. (159 mm) KLV361, LTV765 KLV366 LTV767, LTV768 KIM LIGHTING 6 1 LTV767 only

9 Fixture Model Finish Accessories Ordering Example: LTV71NF / 18LED120 / / SS All-Inclusive LED Collection Lightvault LED LTV71 /277V 18W Composite Housing In-Grade, Up Lighting SPECIFICATIONS LENS RING: Cast bronze, natural fi nish or brushed stainless steel. Eight captive M" blackened stainless steel hex-socket cap screws. LENS: Tempered clear soda lime, F" thick, fl ush with lens ring, slightly crowned. LENS GASKET: One-piece molded silicone, U-channel wraps completely around lens fl ange. COMPOSITE HOUSING: High temperature, compression molded fi berglass impregnated, F" min. wall composite. Charcoal gray. No top lip to trap dirt and moisture. Molded-in solid brass knurled inserts to receive socket base screws. Separate driver and splice compartments, individual cast aluminum internal covers, with silicone gaskets. Two L" NPT in bottom, 24 cu. in. splice area. Body and driver modules epoxy bonded. OPTICAL SYSTEM: 18 LED emitters confi gured in a circular array, mounted on yoke providing ±15 vertical adjustment and 340 horizontal rotation, locking screws. Available in Cool White (approx K). DRIVER: 2 electronic drivers, rated 12 watt and 6 watt. Available in or 277V input. -40 F. starting temperature. All drivers are Underwriters Laboratories recognized. WIRING: Anti-siphon barrier on wiring to and from splice compartment. All components wire linked for ground, quick-disconnect for removal of optical system. DISTRIBUTION: SP for spot distributions, NF for narrow fl ood distributions. CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. LTV71 shown with optional SS50 stainless steel lens ring For complete photometric and specification data, log onto LIGHTVAULT ORDERING INFORMATION 1 Fixture 2 Model 3 Finish LTV71NF Narrow Flood 18LED120 Brass w/ LTV71SP Spot 18LED277 Composite housing 4 Accessories HS50 Half Shield lens ring, die-cast brass only. RG50 Rock Guard lens ring, cast-bronze only SS50 Stainless steel lens ring, brushed TR50 Trim Ring or flush mounting in concrete, brass HL50 Hex Cell Louver SL50 Spread Lens Colored Lens: Consult factory PL50 Prismatic Lens OPTION A-PC2(): Built in photocell sensor mounted inside enclosure, (See page 20). Distribution Patterns: Dimensions 9" DIA. (229 mm) L" (19 mm) 8L" (222 mm) Optical Adjustment " (229 mm) Grade (NF) (SP) 2" (51 mm) 10" DIA. (254 mm) (2) L" NPT LTV71 KIM LIGHTING 7

10 All-Inclusive LED Collection Fixture Model Finish Accessories Ordering Example: EL217FL / 5LED120 / DB / FH MicroFlood LED KLV217 / EL217 //277V or 1 Die-Cast Aluminum Accent, Landscape Lighting NEW KLV217 SPECIFICATIONS HOUSING AND LENS FRAME: Die-cast low copper alloy (<0.6% Cu) aluminum. SWIVEL: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to titanated zirconium conversion coating for added corrosion resistance. LENS: Clear fl at tempered glass with silicone gasket. FASTENERS: Stainless steel. WIRING: No. 18 SF rated 200 C. 6 No Volt cable with fork connectors. OPTICAL SYSTEM: A total of 3 or 9 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). DRIVER KLV217: Constant current electronic driver. Rated for 5 or 15 watts. Available in input. -40ºF. starting temperature. EL217: Constant current electronic driver. Rated for 5 or 15 watts. Available in or 277V input. -40ºF. starting temperature. All drivers are Underwriters Laboratories recognized. NOTE: The driver can be dimmed with an off-the-shelf phase control line dimmer (SCR/TRIAC style). CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. For complete photometric and specification data, log onto MICRO-FLOOD ORDERING INFORMATION 1 Fixture 2 Model 3 Finish (See p.19 for reference) KLV217 Wide Flood 5LED12 BL Black Alum. DB Dark Bronze Alum. GR Verde Green Alum. EL217FL Wide Flood 5LED120 BL Black Alum. 15LED120 DB Dark Bronze Alum 5LED277 GR Verde Green Alum. 15LED277 4 Accessories BD215 Barn Doors FH215 Fixed Hood Dimensions Distribution Pattern: 116 3" (76 mm) 64 3L" (95 mm) K" NPT 5K" (140 mm) 4B" (105 mm) 6J" (159 mm) 2B" (54 mm) (WF) KLV217, EL217 KIM LIGHTING 8

11 Fixture Model Finish Accessories Ordering Example: EL731SP / 6LED120 / DB / HL All-Inclusive LED Collection Scarab LED KLV721 / KLV726 / EL731 EL732 / EL733 / C736 / C737 / C739 //277V, 6W or 1 Die-Cast Aluminum or Brass Landscape Lighting SPECIFICATIONS ALUMINUM HOUSING: Die-cast aluminum body, lamp housing and socket enclosure. BRASS HOUSING: Die-cast brass body, lamp housing and socket enclosure. SWIVEL: Die-cast aluminum with locking teeth and K" solid brass NPT mount. Provides horizontal rotation independent of the threaded mount. Swivel locked by J-20 stainless set screw. Clear anodized prior to powder coating for added corrosion resistance. LENS: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. LENS FRAME: Integral cast aluminum or cast brass lens ring and glare shield. GASKETING: Silicone gaskets used throughout. WIRING: No. 18AWM rated 105 C. OPTICAL SYSTEM: A total of 3 LED emitters confi gured in a rectangular array comprised together as a module Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver for KLV721/ LED emitters for spot (EL731SP, C736SP) or narrow fl ood (EL732NF, C737NF) distributions, confi gured in a circular array, mounted on yoke. Available in Cool White (approx K). DRIVER: Constant current electronic driver. Rated for 5 watts. Available in input. -40ºF. starting temperature for KLV721/726. Electronic driver. Rated for 6 watts. ELECTRONIC DRIVER: Rated for 15 watts. Available in input. -40 F. starting temperature for EL731/732 and C736/737. Electronic driver. Rated for 15 watts. Available in or 277 input, -40 F. starting temperature for EL733 and C739. All drivers are Underwriters Laboratories recognized. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). BRASS: Natural Brass (NB) or Verde Green Patina (VG). CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. For complete photometric and specification data, log onto NEW KLV721, KLV726, EL733, C739 SCARAB ORDERING INFORMATION 1 Fixture 2 Model 3 Finish (See p.19 for reference) KLV721 Wide Flood 5LED12 BL Black Alum. DB Dark Bronze Alum. GR Verde Green Alum. KLV726 Wide Flood 5LED12 NB Natural Bronze Brass VG Verde Green Patina Brass EL731SP Spot 6LED120 BL Black Alum. EL732NF Narrow Flood DB Dark Bronze Alum. GR Verde Green Alum. EL733 Narrow Flood 5LED120 BL Black Alum. 15LED120 DB Dark Bronze Alum 5LED277 GR Verde Green Alum. 15LED277 C736SP Spot 6LED120 NB Natural Bronze Brass C737NF Narrow Flood VG Verde Green Patina Brass C739 Narrow Flood 5LED120 NB Natural Bronze Brass 15LED120 VG Verde Green Patina Brass 5LED277 15LED277 Distribution Patterns: 4 Accessories SL72 Spread Lens AGS73 Adjustable Glare Shield Dimensions 4K" (114 mm) 3D" (92 mm) 7K" (191 mm) K" NPT PL72 Prismatic Lens FGS73 Full Glare Shield 6D"r. 2B" (54 mm) 5B" (130 mm) 4M" (110 mm) HL72 Hex Cell Louvers OPTION A-PC2(): Built in photocell sensor mounted inside enclosure on EL731, EL732, C736, C737, (See page 20). 9" (229 mm) K" NPT 8"r. 2B" (54 mm) (WF) (SP) (NF) KLV721, KLV726 EL731, EL732, EL733 C736, C737, C739 KIM LIGHTING 9

12 All-Inclusive LED Collection Fixture Model Finish Accessories Ordering Example: EL171 / 5LED120 / DB / HL Ravenna Highlighter LED KLV171 / KLV176 / EL171 / BN176 / Die-Cast Aluminum or Brass Sculpture, Accent Lighting NEW KLV171, KLV176, EL171, BN176 SPECIFICATIONS ALUMINUM HOUSING: Die-cast aluminum with die-cast cover, stainless steel fasteners. Stainless steel set screw lock for aiming pivot. BRASS HOUSING: Die-cast brass with die-cast cover, stainless steel fasteners and stainless steel set screw lock for aiming pivot. AIMING: Aimable 358 vertically, horizontal aiming controlled by installation on mounting device. RAVENNA YOKE: Cast aluminum or cast brass, stainless steel fasteners and K" NPSM brass nipple mount. LENS: Tempered glass, B" nominal thickness. GASKETING: Silicone gaskets used throughout. TRANSFORMER: Remote transformer required. For versions only. WIRING: 6 No Volt cable with spade connectors for low voltage cable system connection. OPTICAL SYSTEM: KLV171 A total of 3 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver. DRIVER: KLV171/KLV176: Constant current electronic driver. Rated for 5 watts. Available in input. -40ºF. starting temperature. EL271/BN276: Constant current electronic driver. Available in input. -40 F. starting temperature. All drivers are Underwriters Laboratories recognized. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). BRASS: Natural Brass (NB) or Verde Green Patina (VG). CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. For complete photometric and specification data, log onto RAVENNA HIGHLIGHTER ORDERING INFORMATION 1 Fixture 2 Model 3 Finish (See p.19 for reference) 4 Accessories KLV171 Symmetric 5LED12 BL Black Alum. DB Dark Bronze Alum. GR Verde Green Alum. KLV176 Symmetric 5LED12 NB Natural Brass Brass VG Verde Green Patina Brass EL171 Symmetric 5LED120 BL Black Alum. DB Dark Bronze Alum. GR Verde Green Alum. SL Spread Lens Dimensions PL Prismatic Lens HL Hex Cell Louver BN176 Symmetric 5LED120 NB Natural Brass Brass VG Verde Green Patina Brass 5M" (127 mm) 3D" (76 mm) Distribution Pattern: 23L" (584 mm) (FL) K" NPSM KLV171, KLV176, EL171, BN176 KIM LIGHTING 10

13 Fixture Model Finish Accessories Ordering Example: EL271 / 5LED120 / DB / HL All-Inclusive LED Collection Ravenna Lowlighter LED KLV271 / KLV276 / EL271 / BN276 / Die-Cast Aluminum or Brass Sculpture, Accent Lighting SPECIFICATIONS ALUMINUM HOUSING: Die-cast aluminum with die-cast cover, stainless steel fasteners. Stainless steel set screw lock for aiming pivot. BRASS HOUSING: Die-cast brass with die-cast cover, stainless steel fasteners and stainless steel set screw lock for aiming pivot. AIMING: Aimable 358 vertically, horizontal aiming controlled by installation on mounting device. RAVENNA YOKE: Cast aluminum or cast brass, stainless steel fasteners and K" NPSM brass nipple mount. LENS: Tempered glass, B" nominal thickness. GASKETING: Silicone gaskets used throughout. TRANSFORMER: Remote transformer required. For versions only. WIRING: 6 No volt cable with spade connectors for low voltage cable system connection. OPTICAL SYSTEM: KLV271 A total of 3 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver. DRIVER: KLV271/KLV276: Constant current electronic driver. Rated for 5 watts. Available in input. -40ºF. starting temperature. EL171/BN176: Constant current electronic driver. Available in * input. -40 F. starting temperature. All drivers are Underwriters Laboratories recognized. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). BRASS: Natural Brass (NB) or Verde Green Patina (VG). CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. For complete photometric and specification data, log onto NEW KLV271, KLV276, EL271, BN276 RAVENNA LOWLIGHTER ORDERING INFORMATION 1 Fixture 2 Model 3 Finish (See p.19 for reference) 4 Accessories KLV271 Symmetric 5LED12 BL Black Alum. DB Dark Bronze Alum. GR Verde Green Alum. KLV276 Symmetric 5LED12 NB Natural Brass Brass VG Verde Green Patina Brass EL271 Symmetric 5LED120 BL Black Alum. DB Dark Bronze Alum. GR Verde Green Alum. SL Spread Lens Dimensions PL Prismatic Lens HL Hex Cell Louver BN276 Symmetric 5LED120 NB Natural Brass Brass VG Verde Green Patina Brass 5M" (127 mm) 3D" (76 mm) Distribution Pattern: 8E" (203 mm) K" NPSM KLV271, KLV276, EL271, BN276 (FL) KIM KIM LIGHTING LIGHTING 1Lenis 11 eumsan esent lutat lam

14 All-Inclusive LED Collection Fixture Model Finish Hood Ordering Example: KLV188 / 5LED12 / DB / H " 13" or 20" Traditional LED / Die-Cast Aluminum or Brass Path Lighting NEW NEW NEW KLV188, KLV189, KLV190, KLV192, KLV195, KLV197, BN189, EL188 BN192, EL190 BN197, EL195 H60 Pagoda in BL Black Aluminum TRADITIONAL ORDERING INFORMATION 1 Fixture 2 Model 3 Finish (See p.19 for reference) KLV188 8" Traditional 5LED12 BL Black Alum. KLV190 13" DB Dark Bronze Alum. KLV195 20" GR Verde Green Alum. KLV189 8" Traditional 5LED12 NB Natural Bronze Brass KLV192 13" VG Verde Green Patina Brass KLV197 20" EL188 8" Traditional 5LED120 BL Black Alum. EL190 13" DB Dark Bronze Alum. EL195 20" GR Verde Green Alum. BN189 8" Traditional 5LED120 NB Natural Bronze Brass BN192 13" VG Verde Green Patina Brass BN197 20" Distribution Pattern: H80 Cone in BL Black Aluminum 4 Hood H60 Pagoda H70 Mushroom H80 Cone H70 Mushroom in BL Black Aluminum () KIM LIGHTING 12

15 All-Inclusive LED Collection 8" 13" or 20" Traditional LED / Die-Cast Aluminum or Brass Path Lighting SPECIFICATIONS ALUMINUM ALUMINUM HOOD: Spun aluminum with low copper alloy aluminum die-cast refl ector and hinge assembly. The hood is painted to order and the refl ector is always painted white. The hood refl ector assembly is removable with a no-tool stainless steel latch. Hood is available in three styles: Pagoda, Cone, and Mushroom. ALUMINUM HUSK: Die-cast low copper alloy aluminum with stainless steel hinge / latch assembly. BRASS HOOD: Die-cast brass enclosing a aluminum die-cast refl ector and hinge assembly. The hood is painted to order and the refl ector is always painted white. The hood refl ector assembly is removable with a no-tool stainless steel latch. Hood is available in three styles: Pagoda, Cone, and Mushroom. BRASS HUSK: Die-cast brass with stainless steel hinge / latch assembly. GLOBE: Fluted glass. STEM: 8", 13" or 20" schedule 40 aluminum or brass pipe with K" NPT at bottom plus solid brass locknut for secure mounting. SOCKET: KLV177 G4 to GY6.35 bipin for MR16 50 watt max. lamp. WIRING: 3 No Volt cable with fork connectors. OPTICAL SYSTEM: A total of 3 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver. DRIVER: Constant current electronic driver. Rated for 5 watts. Available in and input. -40ºF. starting temperature. All drivers are Underwriters Laboratories recognized. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). BRASS: Natural Brass (NB) or Verde Green Patina (VG). CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. DB GR BRASS NB VG DB GR NB VG DB GR NB VG For complete photometric and specification data, log onto Dimensions H60 7G" DIA. (178 mm) H70 16B" DIA. (406 mm) H80 12C" DIA. (305 mm) 20" stem (508 mm) 8" stem (203 mm) 13" stem (330 mm) KLV188, KLV189 BN189, EL188 KLV190, KLV192 BN192, EL190 KLV195, KLV197 BN197, EL195 KIM LIGHTING 13

16 All-Inclusive LED Collection Fixture Model Finish Accessories Ordering Example: KLV52 / 5LED12 / DB / HL Bell Wall LED KLV52 / KLV57 / AN52 / AN57 //277V or 1 Die-Cast Aluminum or Brass Accent, Path Lighting SPECIFICATIONS HOUSING AND LENS FRAME: Die-cast, low copper alloy (<0.6% Cu) aluminum or die-cast Brass. Lens frame with silicone gasket, attaches to housing with four captive J-20 stainless steel, slotted cap screws. ARM: Cast aluminum or cast brass. Head is independently rotatable 360 vertically from top dead center. Head may be positioned straight up. Set screw provided for locking position. WALL PLATE: Die-cast, low copper alloy (<0.6% Cu) aluminum or die cast brass. Attaches to stainless steel plate for mounting to any standard electrical outlet box. Internal set screw provided for locking position. LENS: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. WIRING: No Volt cord. No. 18AWM rated 105 C. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). BRASS: Natural Brass (NB) or Verde Green Patina (VG). OPTICAL SYSTEM: A total of 3 or 9 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver. DRIVER: Constant current electronic driver. KLV52/KLV57 rated for 5 watts. Available in input. KLV162/KLV167 rated for 5 watts or 15 watts. Available in, or 277V input. -40ºF. starting temperature. All drivers are Underwriters Laboratories recognized. NOTE: The driver can be dimmed with an off-the-shelf phase control line dimmer (SCR/TRIAC style). CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. NEW KLV52, KLV57 For complete photometric and specification data, log onto BELL WALL ORDERING INFORMATION 1 Fixture 2 Model 3 Finish (See p.19 for reference) KLV52 Asymmetric 5LED12 BL Black Alum. DB Dark Bronze Alum. GR Verde Green Alum. KLV57 Asymmetric 5LED12 NB Natural Bronze Brass VG Verde Green Patina Brass 4 Accessories SL72 Spread Lens PL72 Prismatic Lens HL72 Hex Cell Louver AN52 Asymmetric 5LED120 BL Black Alum. 15LED120 DB Dark Bronze Alum. 5LED277 GR Verde Green Alum. 15LED277 AN57 Asymmetric 5LED120 NB Natural Bronze Brass 15LED120 VG Verde Green Patina Brass 5LED277 15LED277 Distribution Pattern: Dimensions 7K" (191 mm) 7L" (197 mm) 5" DIA. (127 mm) 5K" DIA. (140 mm) (A) 360 KLV52, KLV57, AN52, AN57 KIM LIGHTING 14

17 Fixture Model Finish Accessories Ordering Example: KLV162 / 5LED12 / DB / HL All-Inclusive LED Collection Bell Stem LED KLV162 / KLV167 / EL167 / BN167 //277V or 1 Die-Cast Aluminum or Brass Accent, Path Lighting SPECIFICATIONS HOUSING AND LENS FRAME: Die-cast, low copper alloy (<0.6% Cu) aluminum or die-cast Brass. Lens frame with silicone gasket, attaches to housing with four captive J-20 stainless steel, slotted cap screws. ARM: Cast aluminum or cast brass. Head is independently rotatable 360 vertically from top dead center. Head may be positioned straight up. Set screw provided for locking position. STEM: K" schedule 40 aluminum or brass pipe with K" NPT at bottom plus solid brass locknut for mounting. WALL PLATE: Die-cast, low copper alloy (<0.6% Cu) aluminum or die cast brass. Attaches to stainless steel plate for mounting to any standard electrical outlet box. Internal set screw provided for locking position. LENS: Tempered clear soda lime glass with silicone gasket. Flush with lens frame to promote water runoff when positioned upward. WIRING: 3 No Volt cable with fork connectors. No Volt cord. No. 18AWM rated 105 C. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). BRASS: Natural Brass (NB) or Verde Green Patina (VG). OPTICAL SYSTEM: A total of 3 or 9 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver. DRIVER: Constant current electronic driver. KLV162/KLV167 rated for 5 watts. Available in input. EL167/BN167 rated for 5 or 15 watts. Available in, or 277V input. -40ºF. starting temperature. All drivers are Underwriters Laboratories recognized. NOTE: The driver can be dimmed with an off-the-shelf phase control line dimmer (SCR/TRIAC style). CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. For complete photometric and specification data, log onto NEW KLV162, KLV167 BELL STEM ORDERING INFORMATION 1 Fixture 2 Model 3 Finish (See p.19 for reference) 4 Accessories KLV162 Symmetric 5LED12 BL Black Alum. DB Dark Bronze Alum. GR Verde Green Alum. KLV167 Symmetric 5LED12 NB Natural Bronze Brass VG Verde Green Patina Brass SL72 Spread Lens PL72 Prismatic Lens HL72 Hex Cell Louver EL167 Symmetric 5LED120 BL Black Alum. 15LED120 DB Dark Bronze Alum. 5LED277 GR Verde Green Alum. 15LED277 Dimensions BN167 Symmetric 5LED120 NB Natural Bronze Brass 15LED120 VG Verde Green Patina Brass 5LED277 15LED277 Distribution Pattern: 7K" (191 mm) 7C" (187 mm) 2J" (57 mm) 5K" DIA. (140 mm) 29" (737 mm) () K" NPT KLV162, KLV167, EL167, BN167 KIM KIM LIGHTING LIGHTING 1Lenis 15 eumsan esent lutat lam

18 All-Inclusive LED Collection Fixture Model Finish Accessories Ordering Example: KLV163 / 5LED12 / DB / HL Bell Scroll LED KLV163 / KLV168 / EL168 / BN168 //277V or 1 Die-Cast Aluminum or Brass Path Lighting NEW KLV163, KLV168 SPECIFICATIONS HOUSING AND LENS FRAME: Die-cast, low copper alloy (<0.6% Cu) aluminum or die-cast Brass. Lens frame with silicone gasket, attaches to housing with four captive J-20 stainless steel, slotted cap screws. CROOK ARM: Formed J" schedule 40 aluminum or brass pipe. Provides 6" height adjustment. SCROLL AND SCROLL COLLAR: Cast aluminum or Cast Brass. TRANSITIONAL HUB: Cast aluminum with anti-rotational set screws. BASE STEM: K" schedule 40 aluminum or brass pipe with K" NPT at bottom plus solid brass locknut for mounting. LENS: Tempered clear soda lime glass with silicone gasket. WIRING: 3 No Volt cable with fork connectors. No. 18AWM rated 105 C. FINISH: Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black (BL), Dark Bronze (DB), and Verde Green (GR). BRASS: Natural Brass (NB) or Verde Green Patina (VG). OPTICAL SYSTEM: A total of 3 or 9 LED emitters confi gured in a rectangular array comprised together as a module. Available in Halogen White (approx. 3500K). Emitters are directly attached to the electronic driver. DRIVER: Constant current electronic driver. KLV163/KLV168 rated for 5 watts. Available in input. EL168/BN168 rated for 5 or 15 watts. Available in, or 277V input. -40ºF. starting temperature. All drivers are Underwriters Laboratories recognized. NOTE: The driver can be dimmed with an off-the-shelf phase control line dimmer (SCR/TRIAC style). CERTIFICATION: UL Listed to U.S. and Canadian safety standards for wet locations. For complete photometric and specification data, log onto BELL SCROLL ORDERING INFORMATION 1 Fixture 2 Model 3 Finish (See p.19 for reference) KLV163 Symmetric 5LED12 BL Black Alum. DB Dark Bronze Alum. GR Verde Green Alum. KLV168 Symmetric 5LED12 NB Natural Bronze Brass VG Verde Green Patina Brass 4 Accessories SL72 Spread Lens PL72 Prismatic Lens HL72 Hex Cell Louver EL168 Symmetric 5LED120 BL Black Alum. 15LED120 DB Dark Bronze Alum. 5LED277 GR Verde Green Alum. 15LED277 Dimensions 9L" (248 mm) BN168 Symmetric 5LED120 NB Natural Bronze Brass 15LED120 VG Verde Green Patina Brass 5LED277 15LED277 Distribution Pattern: 11" (279 mm) 18" MIN. (457 mm) 24" MA. (610 mm) 5K" DIA. (140 mm) Twist Lock Hub 29" MIN. (737 mm) 35" MA. (889 mm) Adjustable Height () K" NPT KLV163, KLV168, EL168, BN168 KIM LIGHTING 16

19 All-Inclusive LED Collection Kim Lighting s LED Landscape Collection includes a full complement of mounting options to accommodate any application. Refer to specifi cations on page for product compatibility and limitations. Order separately from fi xture. Note: All fixtures must be grounded in accordance with local codes or the National Electric Code. To maintain light efficiency and prevent fixture overheating, lenses must be kept clean and free of dirt, dust, leaves, and debris. KLV410 Sealed Sealed Connector Step Light # Volt Cable Accent Light Sealed Connector Step Light Sealed Connector Rigid Raceway to 96" (by others) per national and/or local code Accent Light Accent/Path Light Path Light Extension Module EP17 Landscape Light Post In-grade Light Sealed Connector Spear Mount Optional Concrete Anchor (by others) Sealed Connector KLV410 Sealed Connector page 90 # Volt Cable Sealed Connector KIM LIGHTING 17

20 Mounting and Electrical Options 5C" 15" 5K" 3" 7" 2M" TOP SIDE 1B" 1J" 12 Volt Cable 4K" 2F" 1L" K" NPSM Fixture Mount 3K" DIA. K" NPSM Fixture Mount 2J" 6E" KLV600 (200W), KLV605 (300W) Transformer Box: Formed 16 ga. stainless steel enclosure with integral hinge. Cover is secured with stainless steel screws. A through hole is provided in the bottom edge for a padlock (by others). For In-Grade transformer contact factory for information. Used With: Step - KLV817,KLV807 KLV410 Sealed Connector Two-piece connector, injection molded in black Valox, with stainless steel piercing screws. Sealed and waterproofed with dielectric mastic provided. Used With: Minivault - LTV765, KLV361, KLV366 Bell Stem - KLV162, KLV167 Bell Scroll - KLV163, KLV168 Micro-Flood - KLV217 Scarab - KLV721, KLV726 Traditional - KLV188, KLV189 KLV190, KLV192, KLV195, KLV197 Ravenna - KLV171, KLV176, KLV271, KLV276 version only J-27N Surface Mount Cast aluminum with K" NPSM fi xture mount. Internal set screw provided for locking position. 5 cu in. internal volume. Specify fi nish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: J-27N/DB Used With: Micro-Flood - EL217 Scarab - EL731, EL732, C736, C737, EL733, C739 J-25N Portable Spear Mount Cast iron with K" NPSM fi xture mount. Hot dip galvanized fi nish. 5.5 cu in. splice compartment. (SJTW-A) 3 wire cord and plug. Supplied with (3) wire nuts and (3) mastic seals for waterproofi ng connections. 9 cord length Used With: Micro-Flood - EL217 Scarab - EL731, EL732, C736, C737, EL733, C739 version only 3J" DIA. K" NPT Fixture Mount 2J" 1" 3K" 17K" 5" 5" DIA. K" NPSM Fixture Mount K" NPSM Fixture Mount 3" DIA. 4L" K" NPSM Fixture Mount 3L" DIA. K" 3" EP17 LightPost by Engineered Products Co. PVC fi xture molded in black with K" NPT mount is corrosion free and UV resistant. Replaces EMT, conduit connectors and weatherproof boxes. Used With: Bell Stem - EL167, BN167 Bell Scroll - EL168, BN168 Micro-Flood - EL217 Scarab - EL731, EL732, C736, C737, EL733, C739 Traditional - KLV188/189, KLV190/192, KLV195/197 Ravenna - KLV171/176, EL171, BN176, KLV271/276, EL271, BN276 JW (Alum.)/JWBR (Brass) Architectural Wall Mount 3" O.D. by.188" wall cast aluminum with K" NPSM fi xture mount and hand hole with fl ush cover. Internal set screw fi xture lock accessible through hand hole. Internal ground lug supplied with installed lead. Specify fi nish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: JW/DB NB - Natural Brass, VG - Verde Green Patina Cat. No. - Example: JWBR/VG Used With: Micro-Flood - EL217 Scarab - EL731, EL732, C736, C737, EL733, C739 JB1 Architectural Junction Box Die-cast aluminum with K" NPSM fi xture mount. Internal set screw provided for locking position. Two K" NPSM in bottom, 17 cu in. internal volume. Specify fi nish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: JB1/DB CAUTION: Junction Box must be installed high enough to avoid contact with soil or standing water. Used With: Bell Stem - EL167, BN167 Bell Scroll - EL168, BN168 Micro-Flood - EL217 Scarab - EL731, EL732, C736, C737, EL733, C739 Traditional - KLV188/189, KLV190/192, KLV195/197 Ravenna - KLV171/176, EL171, BN176, KLV271/276, EL271, BN276 JBR-2 thru 24 Brass In-Grade Architectural Junction Box Die-cast brass with K" NPSM fi xture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. Cat. No./Description BR-2 (2) K" NPT in bottom JBR-3 (2) L" NPT in bottom JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom. All side taps provided with plugs. 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from Junction Box. Used With: Bell Stem - EL167, BN167 Bell Scroll - EL168, BN168 Micro-Flood - EL217 Scarab - EL731, EL732, C736, C737, EL733, C739 Traditional - EL188, BN189, EL190, BN192, EL195, BN197 version only KIM LIGHTING 18

21 Mounting and Electrical Options 3L" DIA. 19C" 18D" K" NPSM Fixture Mount 3K" K" NPSM Fixture Mount 6" Min. 12" Max. 3" DIA. 18" K" NPSM Fixture Mount K" NPSM Nipple 1D" DIA. 9J" K" NPSM Fixture Mount TOP 2J" DIA. (57 mm) Cable Slot SIDE 1K" (140 mm) 1" JBR30/JBR32 (with cord) Brass In-Grade Stacked Junction Box Die-cast brass with K" NPSM fi xture mount and die-cast cover. Internal set screw provided for locking position. 18 cu in. internal volume. (2) K" NPT in bottom with (2) 19" long brass stakes. JBR32 includes 9 cord 25 Year Limited Warranty: Solid brass junction boxes are warranted for 25 years, from date of sale, against manufacturing defects and failure due to corrosion. CAUTION: Fixture stem and swivel must not contact soil or standing water. Provide drainage away from Junction Box. Hard mount low voltage fi xtures. Used With: Bell Stem - EL167, BN167 Bell Scroll - EL168, BN168 Micro-Flood - EL217 Scarab - EL731, EL732, C736, C737, EL733, C739 Ravenna - EL171, BN176, EL271, BN276 version only SM18 Stanchion Mount 3" O.D. 188" wall cast aluminum with K" NPSM fi xture mount and hand hole with fl ush cover. Internal set screw fi xture lock accessible through hand hole. Internal ground lug supplied with installed lead. Specify fi nish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: SM18/DB Used With: Bell Stem - EL167, BN167 Bell Scroll - EL168, BN168 Micro-Flood - EL217 Scarab - EL731, EL732, C736, C737, EL733, C739 Ravenna - KLV171/176, EL171, BN176, KLV271/276, EL271, BN276 KLV415 Extension Module For raising fi xtures to a height above foliage for effi cient and unobstructed operation. Specify fi nish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: SM18/DB Used With: Bell Stem - KLV162, KLV167 Bell Scroll - KLV163, KLV168 Micro-Flood - KLV217 Scarab - KLV21, KLV26 Ravenna - KLV176, KLV276 Traditional - KLV188, KLV189, KLV190, KLV197, KLV195, KLV197 Traditional - KLV188/189, KLV190/192, KLV195/197 Ravenna - KLV171/176, EL171, BN176, KLV271/276 version only KLV405 Low Voltage Surface Mount Die-cast low copper aluminum with K" NPSM fi xture mount. Stainless steel set screw locks fi xture into mount. Two holes provided for fl at head wood screws. Super TGIC powder coat paint over clear anodizing and Titanated Zirconium conversion. Specify fi nish: BL - Black, DB - Dark Bronze, GR - Verde Green Cat. No. - Example: KLV405/DB Used With: Micro-Flood - KLV217 Scarab - KLV721, KLV726 version only Finishes: Die-Cast Aluminum Die-Cast Brass BL DB GR NB VG Black Dark Bronze Verde Green Natural Bronze Verde Green Patina Warranty: When properly installed and under normal conditions of use, Kim Lighting warrants the LED lighting products ( Product(s) ) sold by it to be free from defects in material and workmanship for a period of one (1) year for metal parts and fi nishes, and, three (3) years for LED Light Engines and LED power components, from the date of sale of such goods to the buyer as specifi ed in Kim Installation Instructions for each Product(s). When installed according to Kim Installation Instructions and accepted trade practices, the solid bronze is warranted for 25 years from date of sale, against manufacturing defects and failure due to corrosion 1. 1 Kim Lighting s brass components are constructed from several brass parts that are manufactured by various methods at various times. Since brass naturally deepens in color as it ages through the normal oxidation process, these parts may exhibit subtle differences in coloration when the product is new. This is normal and expected. These color differences will be eliminated shortly after installation through the normal brass oxidation process. KIM LIGHTING 19

22 Distribution Patterns Kim Lighting offers a variety of distribution patterns to properly illuminate pathways, walkways and opened space areas. Ranging from spot to wide illumination patterns, Kim Lighting s LED landscape collection is a perfect solution when highlighting landscape environments. For complete photometric data, log onto (WF, FL) (SP) (NF) (NF) METRIC Bell Stem Bell Scroll Traditional AMETRIC Step Light Round Step Light Rectangle AMETRIC Bell Wall WIDE FLOOD Minivault LIghtvault Micro-Flood Scarab Ravenna SPOT Minivault LIghtvault Scarab NARROW FLOOD Minivault Scarab NARROW FLOOD LIghtvault Energy Saving Options! (Select Models Only) A-PC2: Built In Sensor () Photocell accessory is mounted in the center of the LED board. Consult factory for environment specifi cations. KLV-PC1: Photocell Automatic On/Off Control Photocell accessory directly mounts to enclosure knockout in right-hand side of transformer enclosure. (For transformers only.) KLV-TC24: Programmable On/Off Timer Control Plug-in time clock plugs into receptacle provided in transformer enclosure. (For transformers only.) REAL WORLD SOLUTION: Scarab LED Greenville Spartanburg International Airport Greenville, South Carolina KIM LIGHTING 20

23 LED Specifi p cation Guide FITURE NAME MODEL NO. DISTRIBUTION WATTAGE VOLTAGE ALUMINUM BRASS page 4 Step light round KLV817 EL817 A A, 1, 1 or 277V page 5 page 6 Step light rectangle Minivault KLV807 EL807 KLV361 KLV366 LTV765 LTV767 LTV768 A A WF WF WF SP, NF WF, 1, 1 6W, 1 or 277V or 277V page 7 Lightvault LTV71 NF, SP 18W or 277V (Composite) page 8 page 9 MicroFlood Scarab KLV217 EL217 KLV721 KLV726 EL731 EL732 EL733 C736 C737 C739 WF WF WF WF SP NF NF SP NF NF, 1 6W 6W, 1 6W 6W, 1 or 277V or 277V or 277V KLV176 FL Ravenna Highlighter KLV171 EL171 FL FL page 10 BN176 FL page 11 pages page 14 page 15 Ravenna Lowlighter Traditional Bell Wall Bell Stem KLV276 KLV271 EL271 BN276 KLV188 KLV189 EL188 BN189 KLV190 KLV192 EL190 BN192 KLV195 KLV197 EL195 BN197 KLV52 KLV57 AN52 AN57 KLV162 KLV167 EL167 BN167 FL FL FL A A A A, 1, 1, 1, 1 or 277V or 277V or 277V or 277V page 16 Bell Scroll KLV163 KLV168 EL168 BN168, 1, 1 or 277V or 277V Kim's LED Landscape Product Matrix is for reference only. Specifications are subject to change Always consult your Kim Lighting Sales Representative for product availability. KIM LIGHTING 21

24 LED Collection Outdoor Landscape Luminaires Additional LED Luminaire Families: MAILING ADDRESS P.O. BO CITY OF INDUSTRY, CA BUSINESS ADDRESS EAST GALE AVENUE CITY OF INDUSTRY, CA PHONE: FA: Printed in U.S.A Version 1.2 (3/10) ENTIRE CONTENTS COPYRIGHT 2010 KIM LIGHTING INC. ALL RIGHTS RESERVED REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION IS STRICTLY PROHIBITED.