SITE/ROADWAY RA LED. Era LED. The Next Generation of LED Site Lighting

Transcription

1 SITE/ROADWAY RA LED Era LED The Next Generation of LED Site Lighting KIM LIGHTING ING Lenis eumsan esent ent lutat lam

2 ERA The Next Generation of LED Site Lighting Contents: Exclusive Optical Technology 2 Thermal Management System 3 Even, Uniform Distribution 4 Mounting Confi gurations 6-7 The Future is Today 8 Design Tools 9 HID to LED Upgrade Kit 0 Design Innovation Ordering Information 2-3 Arm Mounting Dimensions 4 Specifi cations & Warranty 5 Photometry and BUG Ratings 6 Lumen Performance 7 LM-79 Compliance 7 Kim Lighting is known throughout the world as the premier designer and manufacturer of quality, high performance, and architecturally relevant outdoor lighting solutions. Kim Lighting is a division of Hubbell Lighting, Inc.

3 Era LED Kim brings LED to its Era series of performance luminaires, expanding them to feature the most current technology in specification-grade outdoor lighting. The Era LED series is conceived as a total integration of design and technology. This family of luminaires is a direct response to the needs of today, engineered with tomorrow s insight. The Era product line is designed to surpass tough demands, such as energy efficiency, glare control, light trespass, aesthetic and structural integrity, all manufactured to Kim s standards for quality, longevity, and performance. This is LED site lighting perfection. This is Kim Lighting. KIM LIGHTING

4 Exclusive Optical Technology Canted MicroEmitter TM Design Each of the Era LED Emitter refl ectors is precisely aimed at optimal angles for maximum reach and uniform illumination. Achieving Zero Uplight The Era LED MicroEmitter refl ectors are recessed into the fi xture housing, for shielding and zero uplight above the horizontal plane with fl at glass lens. Sealed EmitterDeck TM Assembly LED S RECESSED INTO FIXTURE HOUSING KIM LIGHTING MICROEMITTER MODULE PATENT PENDING Zero Uplight Glare-Free Zone Zero Uplight Glare-Free Zone Glass Lens Durable, clear tempered fl at glass lens. Polycarbonate and convex glass lenses also available. Imagine Any Distribution Dark Sky Compliance Achieve any IES distribution, as well as new unique and custom distributions, with the incredible fl exibility of Kim Lighting s MicroEmitter TM modules within each replaceable and upgradeable Era LED EmitterDeck assembly. Because each LED board is optically controlled separately, designers have the fl exibility to specify distributions specifi c to their project s criteria. BACK LIGHT 390 lm. 2.% BVH 90 = 0.4% UP LIGHT 0 lm. 0% 80 UH 00 UL 00 FORWARD LIGHT 599 lm. 78.9% FVH 90 =.5% BH 80 = 8.9% FH 80 = 36.3% Type II Type III Type IV BM 60 = 9.6% BL 30 = 2.2% FM 60 = 35.6% FL 30 = 5.6% 0 Type V Square Type L Left Type R Right The Era LED luminaires meet requirements for applications where light pollution or light trespass may be a concern. Era LED s unique optical system and fl at glass lens produces zero light above KIM LIGHTING

5 Thermal Management System Convection Cast Driver Compartment Conduction to Housing Air Flow Dual Heat Management with Exclusive LifeShield The Era LED luminaires employ two distinct but complimentary methods to manage the life-limiting heat produced by the LED diode. Both conduction and convection are used to disperse heat, thereby maintaining diode performance and long life. Heat is drawn away from the housing chamber and dispersed into the free air around the luminaire. Additionally, each MicroEmitter module incorporates a solid aluminum heat sink, which is mechanically secured to the EmitterDeck. The EmitterDeck is composed of a heavy gauge aluminum carrier plate/spinning to dissipate heat to the outside environment. Protection System AUTOMATIC THERMAL SELF-MONITORING AND ADJUSTMENT Each EmitterDeck incorporates two temperature sensors located at the hottest locations of the backside of the deck. Each sensor sends temperature readings every 30 seconds to Kim Lighting s exclusive LifeShield Protection System. In extreme conditions, LifeShield detects above tolerance temperature and automatically and temporarily lowers the current to the system to preserve diode life. Lumen output is restored to full capacity once the temperature is stabilized to within acceptable limits. The LifeShield Protection System provides consistent performance with minimal output reduction in extreme and fl uctuating environmental conditions. See page 7 for further details. LifeShield Protection System KIM LIGHTING KIM LIGHTING Lenis 3 eumsan esent lutat lam

6 Even, Uniform Distribution Era LED is perfect for upgrade projects because communities can safely utilize existing pole installations and still maintain uniform illumination between luminaires. Compare the Era LED s low max-to-min uniformity ratio to other LED systems, and the difference is clear. 60' Spacing 20' ' Spacing 20' ' Spacing 20' Footcandle readings at one mounting height forward for Era RA253-20L5K. Uniform, Illumination Kim Lighting s patent pending MicroEmitter Technology features unparalleled ability to capture and harness light using an optical system that shapes, points and tightly controls the beam of individual clusters of LEDs within independent MicroEmitter modules. The result places light where it is needed, creating superior uniformity by evenly distributing horizontal footcandles and, in turn, reducing energy waste. Description Wattage Avg. FC Max. FC Min. FC Avg. to Min. Max. to Min. Era RA25 LED : 2.9: Era RA25 50W PMH : 4.65: Era RA25 200W PMH : 4.69: Era RA25 250W PMH : 4.67: Era RA25 50W HPS : 3.35: Era RA25 200W HPS : 3.37: Era RA25 250W HPS : 3.36: Criteria: Mounting height is 20', on a street width of 35', and spacing is 00' apart. Luminaires are staggered on each side of the street. Mean Lumens and photopic equipment were used for this data. 4 KIM LIGHTING

7 The above illustration is a BIM project example using Kim Lighting s.rfa and.ies formatted fi les. To create your own layout using Kim Lighting s technical data, register at and download Era LED s design fi les. Avoid Nadir Dump Era LED eliminates the staccato of glare and hot spots experienced by humans as they travel through vehicular and pedestrian zones. In contrast, other optically compromised products create a striped-street strobe effect with alternating regions of extreme brightness and darkness, and in turn, disregarding the importance of uniformity creates disability glare. The resulting human experience is annoying at best, but can be potentially hazardous in heavy traffi c environments. Competitor LED Distribution Maximum to Minimum Ratio = (6:) DARK ZONE Nadir Dump Zone 60 Nadir Dump Zone DARK ZONE KIM LIGHTING KIM LIGHTING Lenis 5 eumsan esent lutat lam

8 Pole Mounting Confi gurations HA0S/HA0L Post Top Crook Arm 4. Extruded Arm HA02S/ HA02L Side Mount Crook Arm Extruded Arm Available Configurations. Available Configurations A W A 2B. 2. 3Y 4C On the Post Top and Side Mount Crook Arm and Side Pole Swept Cast Arm, the head is bolted with two large stainless steel bolts. On the Post Top Crook Arm, the arm slip fits and is bolted into the pole top. On the Side Mount Crook Arm, the arm is securely bolted to the pole under decorative covers. The Crook Arms are formed from an aluminum extrusion specifically designed to dampen vibration and wind oscillations. 6 KIM LIGHTING

9 HA03S/HA03L Post Top Swept Cast Arm HAS/ HAL Side Pole Swept Cast Arm Available Configurations 5. Available Configurations. A 2B A 2B 3Y 4C 6. Heavy Cast Arm 3Y 4C 8. Heavy Cast Arm See page 4 for other Support Arm Options On the Post Top Swept Cast Arm, the head is bolted with two large stainless steel studs. On the Post Top Swept Cast Arm, the arm is attached to a cast pole-top fitter with large stainless steel bolts. On all poles, the pole step transition is reinforced and fully welded. On the Side Pole Swept Cast Arm, the arm is attached to the pole with large stainless steel bolts. KIM LIGHTING KIM LIGHTING Lenis 7 eumsan esent lutat lam

10 The Future Is Today ROHS/WEEE COMPLIANT RENEWABLE ENERGY SOURCE COMPATIBILITY PRE AND POST RECYCLED MATERIAL Preserving Resources Kim Lighting is working closely with numerous organizations to develop industry standards ensuring the effi ciency, dependability and quality of LED products that are sold to our customers. Kim Lighting is doing its part to limit hazardous waste and utilize resources to their fullest. MicroEmitter luminaire housings and LED components meet strict US and international environmental protection laws, and are constructed from more than 90% pre and post recycled materials and are entirely lead and mercury free. RoHS Identifi es product components with restricted use of hazardous substances. Recyclable Identifi es products that use pre and post recycled materials. Renewable Identifi es products that are compatible with renewable energy systems. 8 KIM LIGHTING

11 QR CODE Scan code to go to QR CODE TECHNOLOGY BUILDING U I D NG INFORMATION N T ON MODELING E ING Design Tools Kim Lighting offers the most advanced design tools that allow the design community to select products that meet all aspects of a project s criteria. Kim Lighting s 3D BIM and SketchUp models allow designers to seamlessly integrate lighting and energy consumption into their project, saving both time and money as they eliminate the guesswork on how the lighting performs and integrates in the built environment. Kim Lighting s QR codes allow you to download the most up to date product spec sheets, LED performance summaries and HID to LED conversion video segments straight to your smart mobile device. QR Codes Direct access to specifi cation and installation sheets, performance data and video information segments. BIM Simulate, discover and innovate with Kim Lighting s Building Information Modeling data tools. KIM LIGHTING KIM LIGHTING Lenis 9 eumsan esent lutat lam

12 HID to LED Upgrade Scan code to view HID to LED Upgrade video QR CODE EmitterDeck Upgradeability Existing Kim Era HID installations can now be upgraded to cutting edge LED technology. The Upgrade Kits install in just minutes providing a value-added upgrade solution. As a Kim Lighting product, the upgrade kit preserves ETL listing to UL standards and manufacture s warranty something that third party retrofi ts cannot do. Kim Lighting s MicroEmitter based LED luminaires can also be upgraded to the latest LED technology as it evolves over time. Replacement EmitterDecks featuring the latest LED technology are available exclusively from Kim Lighting. Description Total Luminaire Wattage Energy Savings (Watt) Energy Savings (Kw) Savings Per Hrs per $0.0 Per Kwh Era RA25 LED Era RA25 50W PMH $ 2.28 Era RA25 200W PMH $ Era RA25 250W PMH $ Era RA25 50W HPS $ Era RA25 200W HPS $ Era RA25 250W HPS $ Assumes HID lamp replacement every three years including labor. 0 KIM LIGHTING

13 Design Innovation Electronic Driver with 0-0V Dimming Interface through LifeShield Surge Protector LifeShield Protection System with Dim Connection Port Signature Cooling Fins Aluminum EmitterDeck TM Replaceable MicroEmitter TM Modules One-piece Silicone Gasket Tempered Glass Lens Die-Cast Aluminum Lens Frame EmitterDeck and TM Electronic Driver Assembly The Era LED EmitterDeck and electronic driver assembly are modularly designed for installation in just minutes. Individual MicroEmitters are also easily fi eld replaceable. Open lens frame with fl athead screw driver and hang Era LED EmitterDeck. Connect temperature sensor wiring from EmitterDeck to LifeShield Protection System on electronic driver assembly. Insert electronic driver assembly into upper part of housing and lock into place. Tighten with fl athead screw driver Connect electrical quick connect from EmitterDeck to electronic driver assembly. Swing EmitterDeck into place and tighten fl athead screw. Raise and close lens frame. KIM KIM LIGHTING LIGHTING Lenis eumsan esent lutat lam

14 Era LED Ordering Example: A / RA73 / 60L5K20 / LG / A-30 / HSAS A - HA0S/LG Mounting: 3Y confi guration is available for round poles only. Plan View: RA Cat. No. : A 2B 3Y 4C W NOTE: A, 2B, 3Y, and 4C mounting arms are part of the Pole Assembly or Slipfitter Mount. W Wall Mount arm not included and must be ordered separately. See page 4 for Era fixture and arm EPA and dimensions. Wall Mount 2 Fixture: Catalog no. designates fi xture and light distribution. RA HOUSING RA SIZE 7 = 7", 60 LED s 25 = 25", 20 LED s DISTRIBUTION = Type I Full Cutoff 2 = Type II Full Cutoff 3 = Type III Full Cutoff 4 = Type IV Full Cutoff 5 = Type V Square Full Cutoff R = Type R Right Full Cutoff L = Type L Left Full Cutoff Light Distribution Type Type II Type III Type IV Forward Throw Type V Square Type R Right Type L Left 3 Electrical Module: SOURCE 60 = 7", 60 LED s 20 = 25", 20 LED s COLOR TEMPERATURE L3K = 3500K L5K = 500K L2K = 580nm Amber 4300K and 6500K are also available on an Engineered to Order basis VOLTAGE 20 = 20V 208 = 208V 240 = 240V 277 = 277V 347 = 347V = 480V 2 2 Due to current unavailability of 347V and 480V drivers, specifi cation of these voltages shall feature an integral step-down transformer. 4 Finish: Super TGIC powder coat paint over titanated zirconium conversion coating. Color: Stealth Gray Light Gray Platinum Silver White Black Dark Bronze Custom Colors Consult your Kim Cat. No.: SG LG PS WH BL DB CC Lighting representative for custom colors. 5 Optional Photocell: One per fixture required. Line Volts: 20V 208V 240V 277V 480V 347V Cat. No.: A-30 A-3 A-32 A-33 A-34 A-35 Photocell 6 Optional Convex Glass Lens: Cat. No.: CGL The F" thick clear convex tempered glass lens replaces the standard flat glass lens. Provides increased lens presence and provides a subtle improvement in uniformity where pole spacing is extreme. Convex Lens 7 Optional Poly carbonate Lens: Cat. No.: LS One-piece, clear, UV stabilized polycarbonate, fully gasketed, lens replacing the standard tempered glass lens. CAUTION: use only when vandalism is anticipated to be high. Useful life is limited by UV discoloration from sunlight. Polycarbonate Lens 2 KIM LIGHTING

15 Ordering Information 8 Optional Fusing: Line Volts: 20V 208V 240V 277V 347V 480V Cat. No.: SF DF DF SF SF DF Single Fuse 9 Optional Dimming Controls: The Era LED driver features a 0-0V dimming interface on the LifeShield device, allowing 0-00% illumination output when synchronized with a control and dimming system, provided by others. Kim Lighting will advise availability of complete control packages, once they have been tested and exceed Kim s high quality standards. 0 Poles: Refer to Kim Lighting s Arms & Poles Selection Guide for ordering and specification information. Optional Support Arm: NOTE: Wall mount arm is not included and must be ordered separately. Refer to Kim Lighting s Arms & Poles Selection Guide for details and additional information on arm, tenon and wall mounting. See p. 4 for mounting arm dimensions. Ordering example: A/RA73/60L5K277/HSAS A-HA03S Configuration Configuration Cat. No.: HA0S/HA0L HA02S/HA02L HA03S/HA03L HAS/HAL HA2 S/HA2L Arm Mount x x x x x Tenon Mount x x x x x Wall Mount x x x Cat. No.: HA3S/HA3L HA33S/HA33L HA35S/HA35L HA37S/HA37L HA38S/HA38L Arm Mount x x x x x Tenon Mount x x x x x Wall Mount x x x x x 2 Optional Arm Finial: Cat. No.: HAF2 Traditional style finial available to close off mounting hub opposite the fixture. Available only on selected Era arms. Refer to Kim Arms & Poles Selection Guide for a complete selection of heritage style finials. Arm Finial KIM KIM LIGHTING Lenis 3 eumsan esent lutat lam

16 Mounting Arm Dimensions HA0 Post Top Crook Arm (Drawing not to scale) HA02 Side Pole Crook Arm (Drawing not to scale) HA03 Post Top Swept Cast Arm 34K" (876 mm) 9E" (505 mm) 3C" (86 mm) 46K" (8 mm) 25D" (65 mm) 4" (02 mm) 5J" (302 mm) 6J" (43 mm) 7K" (9 mm) 36K" (927 mm) 68K" (740 mm) 2L" (553 mm) 48" (220 mm) 0" (254 mm) 2C" (543 mm) 7L" (97 mm) 3J" (83 mm) 28C" (72 mm) 9C" (238 mm) 4" (02 mm) Fixture & Arm EPA A 2B 3Y 4C HA0S () HA0L () Fixture & Arm EPA A 2B 3Y 4C W HA02S () HA02L () Fixture & Arm EPA A 2B 3Y 4C HA03S () HA03L () HA Side Pole Swept Cast Arm HA2 Side Pole S-Shaped Up Cast Arm HA3 Side Pole Ribbon Arm with Top Scroll 22L" (578 mm) " 2" (279 mm) (533 mm) 9H" (500 mm) 2E" (73 mm) 3K" (343 mm) 27" (686 mm) 25C" (645 mm) 28K" (724 mm) 3D" (86 mm) 7" (432 mm) 6" 7" (52 mm) (432 mm) 5L" (400 mm) 2O" (72 mm) 2" (533 mm) 7G" (88.9 mm) 2" (533 mm) 9K" (495 mm) 3K" (89 mm) 2E (327 mm) 20" (508 mm) 2K" 6E" (546. mm) (75 mm) 6C" (46 mm) 26K" (673. mm) 24L" (629 mm) 8O" (224 mm) Fixture & Arm EPA A 2B 3Y 4C W HAS () HAL () Fixture & Arm EPA A 2B 3Y 4C W HA02S () HA02L () Fixture & Arm EPA A 2B 3Y 4C W HA3S () HA3L () HA33 Side Pole Ribbon Arm with Top Gusset 3K" (343 mm) 20" (508 mm) 7F" (437 mm) 24L" (629 mm) HA35 Side Pole Ribbon Arm with Top Brace Drawing not to scale 22E" (582 mm) 20" (508 mm) 6E" (75 mm) 28D" (728 mm) 24L" (629 mm) 8O" (224 mm) HA37 Side Pole Ribbon Arm with Top Brace and Bottom Scroll (Drawing not to scale) 30I" (785 mm) 20" (508 mm) 6E" (75 mm) 38K" (978 mm) 24L" (629 mm) 8O" (224 mm) 2K" (546 mm) 6E" (75 mm) 26K" (673. mm) 8O" (224 mm) Fixture & Arm EPA A 2B 3Y 4C W HA33S () HA33L () K" (546. mm) 26K" (673. mm) Fixture & Arm EPA A 2B 3Y 4C W HA035S () HA035L () K" (546 mm) 26K" (673 mm) Fixture & Arm EPA A 2B 3Y 4C W HA37S () HA37L () HA38 Side Pole Ribbon Arm with Top Brace and Bottom Gusset (Drawing not to scale) Wall Mount Plate for HA02 mounting arm Wall Mount Plate for HA, HA2, HA3, HA33, HA35, HA37 and HA38 mounting arm 3D" (803 mm) 2K" (546. mm) 20" (508 mm) 6E" (75 mm) 39C" (000 mm) 26K" (673. mm) 24L" (629 mm) 8O" (224 mm) Fixture & Arm EPA A 2B 3Y 4C W HA38S () HA38L () COVER J" (32 mm) MOUNTING PLATE " (25 mm) 7K" (9 mm) 5K" (394 mm) 6L" (72 mm) 2E" (327 mm) COVER J " (32 mm) MOUNTING PLATE " (25 mm) 7K" (9 mm) 7E" (454 mm) 6L" (72 mm) 2E" (327 mm) 8D" COVER " (25 mm) MOUNTING PLATE L" (9 mm) 7" (78 mm) 22" (559 mm) 6J" (59 mm) 5" (38 mm) COVER K" (38 mm) MOUNTING PLATE " (25 mm) (29 mm) 27" (686 mm) 7D" (94 mm) 8G" (468 mm) 4 KIM LIGHTING Refer to Kim Lighting s Arms & Poles Selection Guide for complete details.

17 Specifi cations RA7 Housing 60 LEDs Maximum System Watts = 73 W RA25 Housing 20 LEDs Maximum System Watts = 40 W RA7 Wall Mount with HA02S-W arm option. Wall mount arm not included and must be ordered separately C L 25" (635 mm) 39" (99 mm) 7K" (9 mm) C L 2" (305 mm) 8" (203 mm) 6" (52 mm) 5K" (394 mm) 6K" (49 mm) 22" (559 mm) RA25 Wall Mount with HA02L-W arm option. Wall mount arm not included and must be ordered separately C L 34K" (876 mm) 50D" (286 mm) 7" (432 mm) 25" (635 mm) 7K" (9 mm) C L 7I" (456 mm) 7I" (456 mm) HOUSING: The Ballast Housing is a one-piece die-cast, low copper (<0.6% Cu) aluminum alloy component with integral cooling fi ns. The Refl ector Housing is one-piece die-cast, low copper (<0.6% Cu) aluminum alloy. The Ballast Housing attaches to the Refl ector Housing with stainless steel fasteners and is sealed with a silicone gasket. LENS FRAME ASSEMBLY: One-piece die-cast, low copper (<0.6% Cu) aluminum alloy. Stainless steel hinges provided for attachment to the Refl ector Housing. Stainless steel threaded fasteners provide easy access, concealed from normal view. The F" thick clear fl at or convex tempered glass lens seals against the refl ector fl ange by a one-piece extruded silicone gasket with fused seam, to produce a fully sealed optical chamber. MOUNTING: Stainless steel bolts are provided to attach the luminaire to the crook arm or swept arm mounting. ELECTRONIC MODULE: All electrical components are UL and CSA recognized, mounted on a single plate and factory prewired with quick-disconnect plugs. Module includes a driver, LifeShield temperature control device and surge protector. Electrical module attaches to housing with key hole slots, accessible by opening the lens frame and removing optical module. Driver is rated for -40 F starting and has a 0-0V dimming interface on the LifeShield device for multi-level illumination options. OPTICAL MODULE: Precision, replaceable MicroEmitter refl ectors are positioned to achieve directional control toward desired task. The entire EmitterDeck mounting assembly fastens to the housing as a one-piece module. FINISH/COLOR: TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness. Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray, Platinum Silver, or White. Custom colors are available. WARRANTY: Kim Lighting warrants Era LED products ( Product(s) ) sold by Kim Lighting to be free from defects in material and workmanship for (i) a period of fi ve (5) years for metal parts, (ii) a period of ten (0) years for exterior housing paint fi nish(s), (iii) a period of six (6) years for LED Light Engines (MicroEmitter refl ectors) and, (iv) a period of fi ve (5) years for LED power components (LED Driver, LifeShield temperature control device, surge protector), from the date of sale of such goods to the buyer as specifi ed in Kim Lighting shipment documents for each product. This warranty applies only to the use of the Product(s) as intended by Kim Lighting and does not cover any misapplication or misuse of said Product(s), or installation in hazardous or corrosive environments. In no event shall Kim Lighting s total liability for any reason arising hereunder exceed the purchase price paid to Kim Lighting for the product purchased by the buyer hereunder. Contact Kim Lighting for complete warranty language, exceptions, and limitations. CAUTION: Fixtures must be grounded in accordance with national, state and/or local electrical codes. Failure to do so may result in serious injury. LISTINGS AND RATINGS ETL UL 598, UL 8750 Suitable for wet locations Kim Lighting reserves the right to change specifi cations without notice. KIM LIGHTING 5

18 Photometry Type III - 20 LED HOUSE STREET BACK LIGHT 390 lm. 2.% BVH 90 = 0.4% UP LIGHT 0 lm. 0% 80 UH 00 UL 00 FORWARD LIGHT 599 lm. 78.9% FVH 90 =.5% LM Test Results 4 BH 80 = 8.9% FH 80 = 36.3% Report Number 2897 Mounting Height 20 Feet BM 60 = 9.6% FM 60 = 35.6% Light Dist. Type Total Flux Type III 6589 Lm. BL 30 = 2.2% FL 30 = 5.6% System Watts 33W 0 Type V - 20 LED HOUSE STREET BACK LIGHT 3529 lm. 49.8% BVH 90 = 0.9% 3 4 UP LIGHT 0 lm. 0% 80 UH 00 UL 00 FORWARD LIGHT 3564 lm. 50.2% FVH 90 =.0% LM Test Results Report Number BH 80 = 8.8% FH 80 = 9.% Mounting Height Light Dist. Type 20 Feet Type V 4 BM 60 = 24.6% FM 60 = 24.8% Total Flux 7093 Lm. BL 30 = 5.5% FL 30 = 5.4% System Watts 33W 0 6 KIM LIGHTING Log onto and download photometric fi les from Kim Lighting s IES File Library. For custom optics and color temperature confi gurations, contact factory.

19 Lumen Performance Era LED s exclusive LifeShield Protection System controls lumen depreciation in extreme and fl uctuating environments to preserve operational lifespan. Always consult for the most current performance data. 0 Luminaire Lumen Loss by Hours of Operation 20 Luminaire Output at Outdoor Ambient Temperatures Lumen Percentage L-70 % of Rated Luminaire Lumens Stabilizes Output Due to Exclusive LifeShield Protection System Hazardous Thermal Environment 20 Hours of Operation C -4 F -0 C 4 F 0 C 32 F 0 C 50 F 20 C 68 F 25 C 77 F 30 C 86 F 35 C 22 F 40 C 95 F 45 C 04 F 50 C 22 F 55 C 32 F 60 C 40 F 65 C 49 F 70 C 58 F Outdoor Temperature at 0 C/50 F. Temperature is based on continual average, annual assumptions. Outdoor Temperature at 40 C/04 F. Temperature is based on continual average, annual assumptions. Average Night Time / Outdoor Ambient Temperature Notes:. Lumen loss stabilization is a result of Kim Lighting s MicroEmitter luminaires exclusive LifeShield Protection System and Dual Heat Management. 2 The LifeShield Protection System will lower the current to the LEDs signifi cantly if the luminaire is exposed to direct heat (sun) or excessive abnormal conditions. 3. Luminaire Lumen Loss assumptions are based on LM-80 results and an actual outdoor product testing based upon 500K CCT, 350mA drive current, 25 C lab ambient and cathode temperature at 85 C. Assumptions past 6,000 hours are interpolated. 4. Cathode temperature baseline is at 85 C. If cathode temperature increases during ambient changes and abnormal environment conditions, % of rated lumens will slightly decrease. 5. Outdoor ambient temperatures are assumed SITU averages by geographic region. 6. As Solid State Lighting technology and thermal management systems continually advance, lumen loss projections are subject to improvement. LM Compliance (INDICATES STANDARD IES FORMATTING) Actual Test Report Kim Lighting s photometric data for Era LED luminaires is tested to the IESNA LM standard, and Kim Lighting only uses LEDs that are tested to the IESNA LM standard. When evaluating photometric data for LED luminaires, look for a negative one (-) in the lumen output space of the photometric data fi le to assure compliance with LM Test reports on page 6 refl ect photometry performed under LM standards. KIM LIGHTING 7

20 SITE/ROADWAY WARP9 LED Additional Kim Lighting Premium LED Families HID to LED UPGRADE KIT MicroEmitter LED Technology COMPREHENSIVE CATALOG WARP9 LED SITE / ROADWAY Structural LED SITE / ROADWAY Era Bell/Era Acorn LED SITE / ROADWAY Curvilinear LED SITE / ROADWAY The Archetype LED SITE / ROADWAY Wall Director LED WALL MOUNTED PGL7 LED PARKING STRUCTURE All Inclusive LED LANDSCAPE COLLECTION All-Inclusive LED Bollards LOW LEVEL CFL LED FLOODLIGHTING LED Round Wall Forns WALL MOUNTED LED Site Wallforms WALL MOUNTED MAILING ADDRESS P.O. BOX CITY OF INDUSTRY, CA BUSINESS ADDRESS 6555 EAST GALE AVENUE CITY OF INDUSTRY, CA 9745 PHONE: FAX: Printed in U.S.A. Version. (9/) BECAUSE OF CONTINUING PRODUCT IMPROVEMENT PROGRAMS, KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. ENTIRE CONTENTS COPYRIGHT 20 KIM LIGHTING INC. ALL RIGHTS RESERVED REPRODUCTION IN WHOLE OR IN PART WITHOUT PERMISSION IS STRICTLY PROHIBITED.