Manual Motor Protector with pushbutton actuation up to 25A. Trip-indicating auxiliary contact. Manual Motor Protector with rotary actuation.

Size: px

Start display at page:

Download "Manual Motor Protector with pushbutton actuation up to 25A. Trip-indicating auxiliary contact. Manual Motor Protector with rotary actuation."

Marshall McDaniel
6 years ago
Views:

1 Xstart IEC Motor control Manual Motor Protector with pushbutton actuation up to 25A Shunt and undervoltage release Trip-indicating auxiliary contact Side mounting auxiliary contact Early-make auxiliary contact Door coupling rotary handle and axis extension Front mounting auxiliary contact Manual Motor Protector with rotary actuation up to 32A Manual Motor Controller Top-hat rail adapter Early-make auxiliary contact Front mounting auxiliary contact Manual Motor Protector with rotary actuation up to 65A Electrical connector Mechanical connector up to 15A Side mounting auxillary contact Tool-less plug connector Electrical connector Overload relay seperate mounting adapter up to 65A Contactor up to 150A Contactor up to 15A Contactor up to 32A Contactor up to 65A Overload relay up to 15A Suppressor Overload relay up to 32A Suppressor Overload relay up to 65A Overload relay up to 150A Overload relay up to 150A seperate mounting Top mounting auxiliary contact Power Distribution product guide eatoncorp.com.au December 1

Xstart IEC Motor control The XStart range of contactors, overloads & manual motor protectors is a complete range of IEC Motor control.

Twin terminals with separate sockets in contactors up to 00A. Reduced sealing power consumption for DC contactors due to an electronic coil controller that uses less power.

Offers installation & application flexibility when using different size wires. The improved integrity of the connections reduces cabling faults. With sealing wattage as low as 0.

Offers reductions in total logistics & inventory costs by limiting the number of products ordered & stocked. Increased installation & maintenance efficiency, as wiring is not required.

2 Xstart IEC Motor control The XStart range of contactors, overloads & manual motor protectors is a complete range of IEC Motor control. XStart is an efficient & effective solution for applications from -2600A. Feature AC & DC devices with the same dimensions achieved with an electronically controlled coil system. Twin terminals with separate sockets in contactors up to 00A. Reduced sealing power consumption for DC contactors due to an electronic coil controller that uses less power. Integrated suppressors in DC controlled contactors from 1000A. Integrated surge suppressors in all contactors from 115A & above. Benefit Space savings, reduced engineering design time. Offers installation & application flexibility when using different size wires. The improved integrity of the connections reduces cabling faults. With sealing wattage as low as 0.5W, XStart contactors reduce power consumption & generate less heat. This results in lower cooling requirements, & the ability to mount more contactors per cabinet. Offers reductions in total logistics & inventory costs by limiting the number of products ordered & stocked. Increased installation & maintenance efficiency, as wiring is not required. Xstart IEC Mini contactors Due to its compact size, this line of mini controls is best suited to be applied in light duty loads such as hoisting, packaging, material handling, heating, lighting & automation systems. These mini contactors are a particularly compact, economic & environmentally friendly solution wherever control of small motors or loads is required. Mini contactor relays Rated operational current AC-15 Conventional free 0 V, 230 V, V 380 V, 00 V, 15 V air thermal current I Aux. contact e I e I th A A A N/O - DILER-0(...) N/O 1 NC DILER-31(...) 2 N/O 2 NC DILER-(...) IEC Miniature controls Operational current AC-3 Amp rating Thermal current AC-1 Maximum kw ratings AC-3, 3-Phase Motors, Hz V 15V No. of power poles Aux. contacts NO DILEEM-10(...) NC DILEEM-01(...) NO DILEM-10( ) NC DILEM-01( ) NO DILEM12-10(...) NC DILEM12-01(...) DILEM( ) DILER-0 DILEEM-10 IEC Miniature overload relays Trip Class 10A Ambient temperature compensated -5 to 50 C Selectable manual / automatic reset auxiliary contact as standard Direct mount with DILEM contactors Motor full load current (FLC) A A A A 0.6 1A 1 1.6A A 2. A 6A 6 9A 9 12A Trip class 10A 10A 10A Contact configuration ZE-0,16 ZE-0,2 ZE-0, ZE-0,6 ZE-1,0 ZE-1,6 ZE-2, ZE- ZE-6 ZE-9 ZE-12 ZE-0,16 Power Distribution product guide eatoncorp.com.au December 1 5

11DILE Xstart IEC Mini contactors IEC Miniature controls accessories (auxiliary contacts for mini contactors, front (top) mounted) Contact configuration Poles 1NO/1NC 2 11DILE 2NO 2 DILE 2NC 2 02DILE

RCDILE250 Coil selection chart Coil Voltage (50Hz) Suffix code 15 AC (15V50HZ, 80V60HZ) 230- AC (V50HZ) 110 AC (110V50HZ/1V60HZ) 2 AC (2V50HZ) 2 DC (15V50HZ, 80V60HZ) Note: Mini Contactor Coils are

3 11DILE Xstart IEC Mini contactors IEC Miniature controls accessories (auxiliary contacts for mini contactors, front (top) mounted) Contact configuration Poles 1NO/1NC 2 11DILE 2NO 2 DILE 2NC 2 02DILE 2NO2NC DILE 1NO/3NC 13DILE 3NO1NC 31DILE NO 0DILE NC 0DILE 1ECNO/1LONC 2 11DDILE 2ECNO/2LONC 2 DDILE Note: Auxiliary contacts are rated for 10A AC-1. RCDILE250 Coil selection chart Coil Voltage (50Hz) Suffix code 15 AC (15V50HZ, 80V60HZ) 230- AC (V50HZ) 110 AC (110V50HZ/1V60HZ) 2 AC (2V50HZ) 2 DC (15V50HZ, 80V60HZ) Note: Mini Contactor Coils are not interchangeable. For additional coil voltages contact Eaton. RC-suppressor Description Mini contactor relay AC. For use with DILE... RCDILE250 Note: For AC operated contactors Hz. DC operated contactor relays have an integrated suppressor. Mechanical interlock Reversing link kit Star-delta link kit Other accessories Description Mechanical Interlock MVDILE Note: For two contactors with AC or DC operated coils that are horizontally or vertically mounted, the distance between contactors is 0 mm Description Main current wiring for reversing contactors & starters. MVS-WB-EM Note: Reversing Link Kit does not include mechanical interlock. Order part No. MVDILE for Mechanical Interlock. Description Main current wiring for star-delta combinations. Includes the Star-Delta Bridge. MVS-SB-EM Description Connector for mechanically arranging contactors in combinations. Shroud IP0 Sealable Shroud, snap fit V0DILE HDILE Note: 0 mm distance between contactors with connector. Xstart IEC control relays Basic devices with positively driven contacts Rated operational current AC-15 V 15 V I e A I e A 16 Conventional free air thermal current I th A Aux. contact N/O - DILA-0(...) 3 N/O 1 NC DILA-31(...) 2 N/O 2 NC DILA-(...) 6 Power Distribution product guide eatoncorp.com.au December 1

Xstart IEC Contactors IEC Contactors AC-3 contactor ratings to 1600A & AC-1 contactor ratings to 2600A Panel or DIN-Rail mounting to 2A IP finger & back-of-hand proof Built-in NO or NC auxiliary

Full voltage non-reversing 3-pole contactors IEC ratings AC-3 Ie (A) AC-1 (60 C) Ie = Ith (A) Maximum kw ratings AC-3 3-Phase Motors 50

4 Xstart IEC Contactors IEC Contactors AC-3 contactor ratings to 1600A & AC-1 contactor ratings to 2600A Panel or DIN-Rail mounting to 2A IP finger & back-of-hand proof Built-in NO or NC auxiliary contacts to 38A Built-in surge suppression on DC coils Frame B-G & AC or DC coils on Frame L-R Can be used with ZB or ZEB overload relays Can be used with PKZM or PKE for manual Motor controllers Full voltage non-reversing 3-pole contactors IEC ratings AC-3 Ie (A) AC-1 (60 C) Ie = Ith (A) Maximum kw ratings AC-3 3-Phase Motors Hz 660/ 00V 690V Aux. contacts Frame B NO 1NC 1NO 1NC DILM-10( ) DILM-01( ) DILM9-10( ) DILM9-01( ) Frame B NO 1NC 1NO 1NC DILM12-10( ) DILM12-01( ) DILM15-10( ) DILM15-01( ) Frame C NO 1NC 1NO 1NC 1NO 1NC 1NO 1NC DILM1-10( ) DILM1-01( ) DILM25-10( ) DILM25-01( ) DILM32-10( ) DILM32-10( ) DILM38-10(...) DILM38-01(...) Frame C Frame D DILM0( ) DILM50( ) DILM65( ) DILM2(...) Frame F Frame G DILM80( ) DILM95( ) DILM115( ) DILM150( ) DILM10(...) Frame D Note: The 38A contactors have positively driven contacts between the integrated auxiliary contact & the auxiliary contact module as well as within the auxiliary contact modules. The 0 2A contactors have positively driven contacts within the auxiliary contact module. 6 auxiliary contacts are possible with a combination of side mounted & front mount auxiliary contacts. DC operated contactors (Frames B G, 10A) have a built-in suppressor circuit. Frame B C contactors with 1NC built-in auxiliary are mirror contacts. IEC ratings AC-3 Ie (A) AC-1 (60 C) Ie = Ith (A) Maximum kw ratings AC-3 3-Phase Motors Hz 660/ 00V 1000V 690V Aux. contacts Frame F & G Frame L Electronic Coil NO-2NC 2NO-2NC 2NO-2NC DILM185A/( ) DILM5A/( ) DILM250/( ) Frame M Electronic Coil NO-2NC 2NO-2NC 2NO-2NC DILM300A/( ) DILM00/(...) DILM500/( ) Contactors Frame L - R; Electronic Coil: Wide range of control voltages, Can be controlled by a PLC output, Can be controlled by a low power command device, like a limit switch or sensor. Frame L Power Distribution product guide eatoncorp.com.au December 1

Xstart IEC Contactors IEC Contactors Full voltage non-reversing 3-pole contactors IEC ratings Frame M AC-3 Ie (A) AC-1 (60 C) Ie = Ith (A) Maximum kw ratings AC-3 3-Phase Motors 50 60 Hz 660/ 00V

contacts Frame M Standard coil (110/1V, 230/V AC coil only) 300 00 500 30 612 85 160 0 250 195 3 3 - - - 2NO-2NC 2NO-2NC 2NO-2NC DILM300A-S/( ) DILM00-S/( ) DILM500-S/( ) Frame N Electronic coil

Frame R Electronic coil 1600 - - - - 1800 00 00 00 2600 900 - - - - 1600 - - - - 10 - - - - 2NO-2NC - - - - DILM1600/(...) DILH00/(...) DILH00/(...) DILH00/(...) DILH2600/(.

Frame R DIL DC contactor Thanks to the use of proven hybrid technology, the contacts in Eaton DC contactors have a long lifespan and low contact wear.

fr Efficient and compact With up to 150,000 operations, these DIL DC contactors have a lifespan that is six times longer than that of comparable devices Lower switching contact wear as a result of

5 Xstart IEC Contactors IEC Contactors Full voltage non-reversing 3-pole contactors IEC ratings Frame M AC-3 Ie (A) AC-1 (60 C) Ie = Ith (A) Maximum kw ratings AC-3 3-Phase Motors Hz 660/ 00V 1000V 690V Aux. contacts Frame M Standard coil (110/1V, 230/V AC coil only) NO-2NC 2NO-2NC 2NO-2NC DILM300A-S/( ) DILM00-S/( ) DILM500-S/( ) Frame N Electronic coil Frame N NO-2NC 2NO-2NC 2NO-2NC 2NO-2NC 2NO-2NC DILM580/( ) DILM650/( ) DILM50/( ) DILM8/( ) DILM1000/( ) Frame R Electronic coil NO-2NC DILM1600/(...) DILH00/(...) DILH00/(...) DILH00/(...) DILH2600/(...) Note: AC & DC operated contactors have a built-in suppressor circuit. (Frames L R, A). Frame R DIL DC contactor Thanks to the use of proven hybrid technology, the contacts in Eaton DC contactors have a long lifespan and low contact wear. Hybrid contactors feature two mechanical contacts a extinguishing contact and a break contact that are connected in series. fr Efficient and compact With up to 150,000 operations, these DIL DC contactors have a lifespan that is six times longer than that of comparable devices Lower switching contact wear as a result of extremely short arcing times Convenient to switch on and off: either conventionally or directly with a programmable logic controller (PLC) Reliable and flexible Wide control voltage range of 110 V 250 V AC, 110 V 0 V DC Bi-directional operation (polarity insensitivity) ensures ease of use Wide temperature range of -0 C to +0 C Ideal for a large variety of applications Solar power Rail traffic Marine & Offshore Energy storage Automotive charging infrastructure DC grids Description DC-1 contactor 300A/1000V DC-1 contactor 600A/1000V DILDC300/(RDS250) DILDC600/(RDS250) 8 Power Distribution product guide eatoncorp.com.au December 1

6 Xstart IEC Contactors Coil suffix tables Coil voltage (suffix) DILM-15 DILM1-65, DILM80-95 DILM2 DILM115-5A 2V AC 2V50HZ 2V50HZ 2V50/60HZ RAC2 110V AC 110V50HZ,1V60HZ 110V50HZ,1V60HZ 110V50HZ,1V60HZ RAC1 V AC V50HZ V50HZ V50HZ RAC 15VAC 15V50HZ,80V60HZ 15V50HZ,80V60HZ 00V50HZ,0V60HZ RAC0 2V DC 2VDC RDC2 RDC2 RDC2 8V DC 8VDC RDC60 - RDC60 110V DC 110VDC RDC130 - RDC V DC 0VDC RDC RDC RDC Coil voltage (suffix) DILM DILM580-8 DILM1000 DILM1600 2V AC V AC R10 R V AC R50 R50 R50 RAW250 15VAC RAC500 RAC V DC RDC V DC RDC V DC R10 R V DC R50 R50 R50 RAW250 IEC -Pole Contactors, frame B frame G Ie = Ith (A) Maximum kw ratings AC-3 Ie (A) (0 C) 3 Ph Motors Hz AC-3 AC-1 00V, kw Frame B DILMP(...) Frame C DILMP32-10( ) DILMP-10( ) Frame D DILMP( ) DILMP80( ) Frame G DILMP125( ) DILMP160( ) DILMP0( ) IEC Capacitor contactors, frame C Frame D Switching duty in kvar - Group compensation, w/o reactor 230V 00V 525V 690V Frame C DILK12-11(...) DILK-11(...) DILK25-11(...) Frame D DILM DILK33-10(...) DILK50-10(...) Note: Weld resistant contactors for capacitors, with inrush current peaks up to 180 I n Accessories - Auxiliary contacts Conventional thermal current, Open at 60 C Ith = Ie, AC-1 in Amps Poles Contact configuration Frame B C Front (Top) Mount NO 2NC 1ECNO-1LONC 2NO 2NC DILA-XHI DILA-XHI02 DILA-XHI11 DILA-XHIV11 DILA-XHIT DILA-XHIT11 DILA-XHIT NO-2NC DILA-XHIT NO NC 2NO-2NC 3NO-1NO 1NO-3NC, 1ECNO-1LONC DILA-XHI0 DILA-XHI0 DILA-XHI DILA-XHI31 DILA-XHI13 DILA-XHIV Frame B-C 1 Frame B - side mount: can be mounted to the left side of contactor only. Cannot be used in combination with front (top) mount auxiliary contacts or mechanical interlocks. Note: Interlocked opposing contacts, to IEC/EN Annex L (positively driven), within the auxiliary contact modules (not NO (early make) & NC (late break) contacts) & for the built-in auxiliary contacts of the DILM - DILM38... Auxiliary break contact can be used as mirror contact to IEC/EN Annex F (not NC (late break) contact). 3 No auxiliary contacts can be fitted between two contactors. Suitable for the combination with electrical wiringlinks in tool-less plug connection usable with: DILM12-XSL, DILM12-XRL, DILM12-XS1, PKZM0-XDM12, PKZM0-XRM12, PKZM0-XSM12 2 Power Distribution product guide eatoncorp.com.au December 1 9

7 Xstart IEC Contactors Accessories Accessories - Auxiliary contacts Conventional thermal current, Open at 60 C Ith = Ie, AC-1 in Amps Poles Contact configuration Frame B Frame B Side mount NO DILA-XHI10-S NC DILA-XHI01-S Frame C Side mount 10 2 DILM32-XHI11-S Frame C Frame D G Front (top) mount NO 2NC DILM150-XHI DILM150-XHI DILM150-XHI NO NC 2NO-2NC 3NO-1NC 1NO-3NC, 1ECNO-ILONC DILM150-XHI0 DILM150-XHI0 DILM150-XHI DILM150-XHI31 DILM150-XHI13 DILM150-XHIV Frame D-G Side mount auxiliary contacts for frame D R, A Conventional free air thermal current, Ith = Ie, AC-1 in Amps Frame D L (0-5A) Poles Contact configuration IECNO-ILONC DILM1000-XHI11-SI DILM1000-XHIV11-SI Frame L R ( A) DILM1000-XHI11-SI IECNO-ILONC DILM8-XHI11-SI DILM8-XHI11V-SI Note: For Frames B C, cannot use both a side & a top mount auxiliary contact at the same time. For Frame D, 6 auxiliary contacts maximum (can be a combination of side & top mount units). For Frames F R, 8 auxiliary contacts maximum (can be a combination of side & top mount units). DILM12-XMV Mechanical interlock For use with... Pkg. qty. DILM - 15 DILMP 5 DILM12-XMV DILA DILM DILM32-XMV DILM0-2 1 DILM65-XMV DILM DILM150-XMV DILM32-XMV DILM185A DILM500-XMV DILM DILM8-XMV Reversing link kits For use with... Pkg. qty. DILM DILM12-XRL DILM500-XMV DILM DILM32-XRL DILM DILM65-XRL DILM DILM150-XRL For two contactors with AC or DC operated magnet system which are horizontally or vertically mounted. For B G frames, mechanical lifespan is 2.5 x 106 operations & the distance between contactors is 0 mm. For L N frames, mechanical lifespan is 5 x 106 operations & no auxiliary contact can be mounted between the mechanical interlock & the contactor the distance between contactors is 15 mm. DILM150-XMV and DILM8-XMV consist of an interlock element & mounting plate. DILM32-XRL Also includes Interlocking Bridge (DILM12-XEV). 0 Power Distribution product guide eatoncorp.com.au December 1

8 Xstart IEC Contactors Accessories Suppressor circuit Voltage U s V For use with RC suppressors 2-8 AC DILM - DILM15 DILM12-XSPR AC DILMP DILM12-XSPR AC DILA DILM12-XSPR AC DILM1 - DILM32 DILM32-XSPR AC DILK12 - DILK25 DILL.. DILM32-XSPR AC DILMP32 - DILMP DILM32-XSPR AC DILM0 - DILM95 DILM95-XSPR AC DILK33 - DILK50 DILM95-XSPR AC DILMP - DILMP0 DILM95-XSPR500 Varistor suppressors 2-8 AC DILM12-XSPV AC DILM - DILM15 DILM12-XSPV130 DILMP AC DILA DILM12-XSPV AC DILM12-XSPV AC DILM32-XSPV8 DILM1 - DILM AC DILK12 - DILK25 DILM32-XSPV AC DILL.. DILM32-XSPV DILMP32 - DILMP AC DILM32-XSPV AC DILM95-XSPV AC DILM0 - DILM95 DILM95-XSPV130 DILK33 - DILK AC DILMP - DILMP0 DILM95-XSPV AC DILM95-XSPV500 Varistor suppressors with integrated LED 2-8 AC DILM - DILM15 DILM12-XSPVL AC DILMP DILA DILM12-XSPVL 2-8 AC DILM1 - DILM32 DILM32-XSPVL8 DILK12 - DILK25 DILL AC DILMP32 - DILMP DILM32-XSPVL 2-8 AC DILM0 - DILM95 DILM95-XSPVL8 DILK33 - DILK AC DILMP - DILMP0 DILM95-XSPVL Diode suppressor DC DILM - DILM15 DILMP DILA DILM12-XSPD DILM12-XSPR8 DILM12-XSPV8 DILM12-XSPVL8 DILM12-XSPD Power Distribution product guide eatoncorp.com.au December 1 1

9 DILM12-XP1 Xstart IEC Contactors Accessories Paralleling links for main contacts* For use with DILM - DILM15 DILM1 - DILM32 DILM0 -DILM2 DILM80 - DILM2 DILM185A * Consisting of 2 paralleling links DILM12-XP1 DILM32-XP1 DILM65-XP1 DILM150-XP1 DILM185-XP1 DILM32-XP1 DILM150-XP1 DILM12-XS1 Star-point bridges For use with DILM - DILM15 DILM1 - DILM32 DILM0 - DILM2 DILM80 - DILM10 DILM185A - DILM00 DILM500 DILM12-XS1 DILM32-XS1 DILM65-XS1 DILM150-XS1 DILM00-XS1 DILM500-XS1 DILM00-XS1 DILM12-XSL Star-delta wiring kit For use with DILM, DILM9, DILM12, DILM15 DILM1, DILM25, DILM32 DILM0, DILM50, DILM65 DILM80, DILM95 DILM115, DILM150 DILM12-XSL DILM32-XSL DILM65-XSL DILM95-XSL DILM150-XSL DILM32-XSL DILM32-XIP2X IP2X cover set For use with DILM1, DILM25, DILM32, DILM38, DILMP32, DILMP DILM0, DILM50, DILM65, DILM2, DILMP, DILMP80 DILM80, DILM95, DILM115, DILM150, DILM10, DILMP125, DILMP160, DILMP0, ZB150 DILM32-XIP2X DILM65-XIP2X DILM150-XIP2X DILM65-XIP2X 2 Power Distribution product guide eatoncorp.com.au December 1

10 Xstart IEC Contactors Accessories Electronic timer modules Description For use with On-delayed Cannot be combined with top mounting auxiliary contacts. Incl. suppressor circuits 2V AC/DC DILM - DILM32 DILM32-XTEE11(R) V AC DILMP DILMP32 - DILMP DILM32-XTEE11(R30) 0... V AC DILA DILM32-XTEE11(RAC) Off-delayed, auxiliary voltage-free Cannot be combined with top mounting auxiliary contacts. Incl. suppressor circuits 2V AC/DC DILM32-XTED11-1(R) DILM32-XTED11-10(R) DILM32-XTED11-100(R) V AC DILM - DILM32 DILMP DILMP32 - DILMP DILA DILM32-XTED11-1(RAC130) DILM32-XTED11-10(RAC130) DILM32-XTED11-100(RAC130) 0... V AC DILM32-XTED11-1(RAC) DILM32-XTED11-10(RAC) DILM32-XTED11-100(RAC) For star-delta applications Cannot be combined with top mounting auxiliary contacts. Incl. suppressor circuits 2V AC/DC DILM - DILM32 DILM32-XTEY(R) V AC DILMP DILMP32 - DILMP DILM32-XTEY(RAC130) 0... V AC DILA DILM32-XTEY(RAC) DILM32-XTEE11(R) DILM32-XTED11-1(R) DILM32-XTEY(R) Accessories Description For use with SmartWire-Darwin module for installation on contactors. One module per contactor Two digital inputs for potential-free contacts. 1 electrical interlock for the surface mounting of reversing starters. Messages: Contactor switch status, status of the digital inputs 1 and 2. Two digital inputs for potential-free contacts. 1 electrical interlock for the surface mounting of reversing starters. 1-0-A switch for manual or automatic operation. Messages: contactor switching position, status of the digital inputs 1 and 2, 1-0-A switch position. Wiring set for motor feeder plug PE module with contact plate Motor plate with PE module and contact plate DILM - DILM32 DILM38 DILA DILM - DILM32 DILM38 DILA DILM DILM9 DILM12 DILM15 DILM DILM9 DILM12 DILM15 PKZM0/PKE + DILM PKZM0/PKE + DILM9 PKZM0/PKE + DILM12 PKZM0/PKE + DILM15 DIL-SWD DIL-SWD DILM12-XMCE DILM12-XMCP/E DILM12-XMCP/T DIL-SWD DILM12-XMCP/E Power Distribution product guide eatoncorp.com.au December 1 3

11 Xstart IEC Contactors Accessories Sealable shrouds - Transparent Terminal Cover For use with For use with DILM32-XTE... DILM32-XTEPLH DILM185A DILM5A DILM5A-XHB DILM32-XTEPLH DILM1000-XSM Suppressor circuits for vacuum contactors (on load side) For use with DILM580 DILM650 DILM50 DILM8 DILM1000 DILH00 DILH00 DILH2600 DILM1000-XSM DILH2600-XSM DILM250 DILM300A DILM00 DILM500 DILM580 DILM650 DILM50 DILM8 DILM1000 DILM00-XHB DILM500-XHB DILM650-XHB DILM8-XHB Amplifier module for separate mounting DILM5A-XHB Rated operational current AC-15 AC-15 DC 230V 00V 0V I e A I e A I e A Actuating voltage U s A DC For use with...dilm DILMP... DILL... DILK... ETS-VS3 Notes: Contactor coils with rated operational current > 2 A must be actuated via the DILER-G mini contactor relay. Rated operational current DC: Making and breaking conditions DC-13, time L/R 300ms Replacement coils for DILM contactors ETS-VS3 DILM32-XSP(RDC2) For use with DILM1 DILM25 DILM32 DILM38 DILM0 DILM50 DILM65 DILM2 DILM80 DILM95 DILM115 DILM150 DILM10 DILM185A DILM5A DC voltage DILM32-XSP (RDC2) * DILM65-XSP (RDC2) * DILM95-XSP (RDC2) * DILM150-XSP (RDC2) * DILM5A-XSP (RDC2) * * (Includes electronic module) AC voltage DILM32-XSP (V50HZ) DILM65-XSP (V50HZ) DILM95-XSP (V50HZ) DILM150-XSP (RAC) DILM5A-XSP (RAC) For use with DILM250 DILM300A DILM00 DILM500 DILM580 DILM650 DILM50 DILM8 DILM1000 DC voltage DILM250-XSP/E (R50) DILM500-XSP/E (R50) DILM1000-XSP/E (R50) DILH00 - DILM250-S DILM300A-S DILM00-S DILM500-S - - AC voltage DILM250-XSP/E (R50) DILM500-XSP/E (R50) DILM1000-XSP/E (R50) DILH00-XSP/E (RAW250) DILM250-S-XSP/E (0-V50/60HZ) DILM500-S-XSP/E (0-V50/60HZ) CMD(2VDC) Contactor monitoring device CMD Application The function of the CMD is to monitor the main contacts of a contactor against welding. For this the control voltage of the contactor is compared with the state of the main contacts which is reliably monitored using a mirror contact (IEC EN Annex F). If the coil is deenergized and the contactor does not drop out the CMD trips the upstream circuit-breaker/motor protective circuit breaker/switch-disconnector via a shunt release. Description Contactor monitoring device, 2VDC Contactor monitoring device, VAC Safety The CMD has a safety-compliant design so that in safety combinations with a circuit-breaker/motor protective circuit breaker/switch disconnector the reliable switch off in the case of a "welded contactor" can be guaranteed. In this application it replaces the series connection of a second contactor. As a component it conforms to safety category 3 according to EN 95-1 and EN ISO CMD(2VDC) CMD(0-VAC) Power Distribution product guide eatoncorp.com.au December 1

Overload relays Description Thermal overload relays Electronic overload relays Type ZB ZEB C Advanced motor protection relays Relay type Thermal Bi-Metallic Electronic Electronic Direct connect to

5:1 5:1 Motor overload protection Yes Yes Yes Underload protection Yes Supply protection Yes Enhanced phase loss protection Enhanced phase imbalance protection Trip class Reset type Communications

12 Overload relays Description Thermal overload relays Electronic overload relays Type ZB ZEB C Advanced motor protection relays Relay type Thermal Bi-Metallic Electronic Electronic Direct connect to contactor Yes, (DILM) Yes, (DILM) Separate mount Yes, Adapter Yes Yes FLC Range 0.1-0A A A (with CTs) FLC max.:min. ratio Approx. 1.5:1 5:1 Motor overload protection Yes Yes Yes Underload protection Yes Supply protection Yes Enhanced phase loss protection Enhanced phase imbalance protection Trip class Reset type Communications with I/O Yes Yes Yes Yes 10A Selectable manual / automatic Yes Selectable 10 / / 30 Selectable manual / automatic Remote display Yes Ground fault Yes Yes 5 0 Selectable manual / automatic / programmable / remote Yes (Modbus, ETHERNET/IP, PROFIBUS) Alarm no trip Yes (voltage & ground faults) Jam Yes Yes Programmable reset timers Yes Progammable reset attempts Yes Current monitoring Yes Yes Voltage monitoring Yes Power monitoring Yes Thermal capacity monitoring Yes Yes Motor run hours monitoring Yes Power Distribution product guide eatoncorp.com.au December 1 5

Overload relays ZB bi-metallic overload relays Direct mount to DILM contactors or separate mount Class 10A, up to 0A motors Ambient - compensated bi-metallic Test/off pushbutton Reset pushbutton

2 0. 0. 0.6 15A 15A 15A 15A 0.6 1 15A 1 1.6 15A 1.6 2. 15A 2. 15A 6 15A 6 10 15A 9 12 9 15A 12 16 12 15A Frame C Direct mount to contactor (DILM1-38) 0.1 0.16 1 38A 0.16 0.2 1 38A 0.2 0. 1 38A 0. 0.6 1 38A 0.6 1 1 38A 1 1.

1 38A 6 1 38A 6 10 1 38A 10 16 1 38A 16 2 1 38A 2 32 1 38A 32-38 1 38A Frame D Direct mount to contactor (DILM0-2) 6 10 0 2A 10 16 0 2A 16 2 0 2A 2 0 0 2A 0 5 0-2 A 50 65 0 2A 65 5 0-2 A Frame F G

13 Overload relays ZB bi-metallic overload relays Direct mount to DILM contactors or separate mount Class 10A, up to 0A motors Ambient - compensated bi-metallic Test/off pushbutton Reset pushbutton mannual/auto Tripfree release ZB12-2, ZB32-16 ZB65-5 ZB ZB150-0/KK Setting range overload release, Ir Aux contact configuration Frame B Direct mount to contactor (DILM-15) A 15A 15A 15A A A A 2. 15A 6 15A A A A Frame C Direct mount to contactor (DILM1-38) A A A A A A A A A A A A A A Frame D Direct mount to contactor (DILM0-2) A A A A A A A Frame F G Direct mount to contactor (DILM80-10) A A A A A A Frame F G Separate mount to contactor (DILM80-10) A A A A A A For use with contactor Ampere range ZB12-0,16 ZB12-0,2 ZB12-0, ZB12-0,6 ZB12-1 ZB12-1,6 ZB12-2, ZB12- ZB12-6 ZB12-10 ZB12-12 ZB12-16 ZB32-0,16 ZB32-0,2 ZB32-0, ZB32-0,6 ZB32-1 ZB32-1,6 ZB32-2, ZB32- ZB32-6 ZB32-10 ZB32-16 ZB32-2 ZB32-32 ZB32-38 ZB65-10 ZB65-16 ZB65-2 ZB65-0 ZB65-5 ZB65-65 ZB65-5 ZB ZB150-0 ZB ZB ZB ZB ZB150-50/KK ZB150-0/KK ZB /KK ZB /KK ZB /KK ZB150-15/KK 6 Power Distribution product guide eatoncorp.com.au December 1

Overload relays ZB bi-metallic Overload Relays Setting range Overload release, Ir Aux contact configuration Frame L Direct mount or separate mount (DILM185A-300A) 50 0 0 100 95 125 1 160 160 0 0 250

Z5-160/FF5A Z5-0/FF5A Z5-250/FF5A Z5-0/FF250 Z5-100/FF250 Z5-125/FF250 Z5-160/FF250 Z5-0/FF250 Z5-250/FF250 Z5-300/FF250 Z5-160/FF5A Note: Short circuit protection: Observe the maximum permissible

Current transformer operated overload relay Setting range Overload release, Ir Contact Sequence Aux contact configuration For use with contactor Ampere range Frame L N Separate Mount 2-60 - 90 85-125

14 Overload relays ZB bi-metallic Overload Relays Setting range Overload release, Ir Aux contact configuration Frame L Direct mount or separate mount (DILM185A-300A) For use with contactor Ampere range 185-5A 185-5A 185-5A 185-5A 185-5A 185-5A 250A 250A 250A 250A 250A 250A 300A Z5-0/FF5A Z5-100/FF5A Z5-125/FF5A Z5-160/FF5A Z5-0/FF5A Z5-250/FF5A Z5-0/FF250 Z5-100/FF250 Z5-125/FF250 Z5-160/FF250 Z5-0/FF250 Z5-250/FF250 Z5-300/FF250 Z5-160/FF5A Note: Short circuit protection: Observe the maximum permissible fuse of the contactor with direct device mounting. Trip Class: 10A. Suitable for protection of EEx e-motors. Current transformer operated overload relay Setting range Overload release, Ir Contact Sequence Aux contact configuration For use with contactor Ampere range Frame L N Separate Mount A A A A A A A A A ZW- ZW-90 ZW-125 ZW-160 ZW- ZW-290 ZW-00 ZW-50 ZW-0 ZB32-XEZ DIN-Rail or panel-mount adapter, frame C D Accessories For use with... ZB32 ZB65 ZB32-XEZ ZB65-XEZ Can be snap fitted on a top hat rail (DIN-Rail) or can be screw fitted. External reset button, IP65 For use with... ZW... ZE, Z5 ZB12, ZB32 ZB65, ZB150 M-DZ-B-GB M-DZ-B-GB ZEB12 electronic overload relay Phase-failure sensitivity Test/off pushbutton Reset button ZEB12 direct mounting Manual/Auto reset selectable Protection with heavy starting duty (Class 5-30) Ground fault detection Setting range of overload releases I r A Auxiliary contact For use with... Without NO - 1NC ZEB12-1,65 Without 1-5 1NO - 1NC DILM ZEB12-5 Without - 1NO - 1NC DILM9 ZEB12- With NO - 1NC DILM12 ZEB12-1,65-GF With 1-5 1NO - 1NC DILM15 ZEB12-5-GF With - 1NO - 1NC ZEB12--GF ZEB12-1,65 Power Distribution product guide eatoncorp.com.au December 1

Overload relays ZEB32 electronic overload relay Phase-failure sensitivity Test/off pushbutton Reset button Manual/Auto reset selectable Protection with heavy starting duty (Class 5-30) ZEB32 direct

65 1NO - 1NC ZEB32-1,65 Without 1-5 1NO - 1NC ZEB32-5 Without - 1NO - 1NC DILM1 ZEB32- Without 9-1NO - 1NC DILM25 ZEB32- With 0.33-1.

15 Overload relays ZEB32 electronic overload relay Phase-failure sensitivity Test/off pushbutton Reset button Manual/Auto reset selectable Protection with heavy starting duty (Class 5-30) ZEB32 direct mounting ZEB32-1,65 Ground fault detection Setting range of overload releases I r A Auxiliary contact For use with... Without NO - 1NC ZEB32-1,65 Without 1-5 1NO - 1NC ZEB32-5 Without - 1NO - 1NC DILM1 ZEB32- Without 9-1NO - 1NC DILM25 ZEB32- With NO - 1NC DILM32 ZEB32-1,65-GF With 1-5 1NO - 1NC DILM38 ZEB32-5-GF With - 1NO - 1NC ZEB32--GF With 9-1NO - 1NC ZEB32--GF ZEB32 separate mounting Ground fault detection Setting range of overload releases I r A Auxiliary contact For use with... Without NO - 1NC ZEB32-1,65/KK Without 1-5 1NO - 1NC ZEB32-5/KK Without - 1NO - 1NC DILM1 ZEB32-/KK Without 9-1NO - 1NC DILM25 ZEB32-/KK With NO - 1NC DILM32 ZEB32-1,65-GF/KK With 1-5 1NO - 1NC DILM38 ZEB32-5-GF/KK With - 1NO - 1NC ZEB32--GF/KK With 9-1NO - 1NC ZEB32--GF/KK ZEB65- ZEB65 & ZEB150 electronic overload relay Phase-failure sensitivity Test/off pushbutton Reset button ZEB65 direct mounting Ground fault detection Setting range of overload releases I r A Manual/Auto reset selectable Protection with heavy starting duty (Class 5-30) Auxiliary contact For use with... Without 9-1NO - 1NC DILM0 ZEB65- With 9-1NO - 1NC DILM50 ZEB65--GF Without NO - 1NC DILM65 ZEB With NO - 1NC DILM2 ZEB GF ZEB150 direct mounting Ground fault detection Setting range of overload releases I r A Auxiliary contact For use with... Without NO - 1NC DILM80 ZEB DILM95 DILM115 With NO - 1NC DILM150 ZEB GF ZEB150 separate mounting Ground fault detection Setting range of overload releases I r A Auxiliary contact For use with... Without NO - 1NC DILM80 ZEB /KK DILM95 DILM115 With NO - 1NC DILM150 ZEB GF/KK 8 Power Distribution product guide eatoncorp.com.au December 1

16 Overload relays ZEB accessories Current sensors Setting range of overload releases I r A For use with... ZEB-XCT ZEB32-5-GF/KK ZEB-XCT ZEB32-5/KK ZEB-XCT ZEB-XCT1500 Remote reset Description Remote reset module 2Vdc* Remote reset module 1Vac* Remote reset module 2Vac* C0-XCOM ZEB-XRR-1 ZEB-XRR-2 * Customer can wire remote mounted button to reset module (that is, mm pushbutton (M-D-B-GB-K10) Thermistor overload relays for machine protection 3 A rated operational current for AC-15, V Description Without automatic reset Mains & fault LED display Without automatic reset Mains & fault LED display With 2 sensor circuits Without automatic reset Mains & fault LED display Trip with short-circuit in the sensor cable Without automatic reset Mains & fault LED display Selector switch with/without automatic reset For manual or remote resetting Test button Mains & fault LED display Selector switch with/without automatic reset For manual or remote resetting Test button Mains & fault LED display With 2 sensor circuits Selector switch with/without automatic reset For manual or remote resetting Test button Mains & fault LED display Trip with short-circuit in the sensor cable Selector switch with/without automatic reset For manual or remote resetting Test button Mains & fault LED display Multifunction device Selector switch with/without automatic reset Trip with short-circuit in the sensor cable Zero-voltage safe For manual or remote resetting Test button Short-circuit detection and retention can be deactivated Mains & fault LED display Accessories - screw adapter Rated control voltage Us, V 2 V 50/60 Hz, 2 V DC 2 V 50/60 Hz, 2 V DC EMT6 EMT62 EMT6-K 230 V 50/60 Hz EMT6(230V) 2 V 50/60 Hz, 2 V DC 2 V 50/60 Hz, 2 V DC 230 V 50/60 Hz 2 V 50/60 Hz, 2 V DC EMT6-DB EMT62-DB EMT6-KDB EMT6-DB(230V) EMT6-DBK For screw fixing CS-TE EMT6 EMT6-DB EMT6-DBK CS-TE Provide additional short-circuit protection in the sensor circuit with a current monitoring relay. Power Distribution product guide eatoncorp.com.au December 1 9

Overload relays C Global motor management relay The Power Xpert C motor management relay is Eaton s newest addition to the C00 series of advanced motor protection.

Power options - 1/ Vac or 2 Vdc C motor management relay has a fully programmable trip and alarm thresholds with time delays.

With the voltage loss restart functionality, the C allows for automatic recovery in the event of undervoltage conditions without the need for user intervention, and the advanced diagnostics allows

The pre-programmed operation mode allows fast, easy, error-free installation for the majority of applications. Product range 0.3 800 A 15V/690 Vac, 3.

17 Overload relays C Global motor management relay The Power Xpert C motor management relay is Eaton s newest addition to the C00 series of advanced motor protection. With industry-leading diagnostic capabilities, energy usage analytics, and an unrivaled compact footprint, the C can be seamlessly integrated into a variety of systems and applications. Power options - 1/ Vac or 2 Vdc C motor management relay has a fully programmable trip and alarm thresholds with time delays. The Modular pass-through design with scalable options for current, voltage, power, energy protections and monitoring. With the voltage loss restart functionality, the C allows for automatic recovery in the event of undervoltage conditions without the need for user intervention, and the advanced diagnostics allows for quick and accurate identification of the root cause of a fault in line, load and motor conditions. The pre-programmed operation mode allows fast, easy, error-free installation for the majority of applications. Product range A 15V/690 Vac, 3.3k Vac with voltage transformers 80 Hz operation Selectable trip class (5 0) On-board I/O digital inputs 1 Vac or 2 Vdc 3 relay outputs 2N/O, 1C/O On-board communication options EtherNet/IP Modbus TCP, Modbus RTU PROFIBUS DP USB Control user interface - CUM Easy and safe monitoring, control and parameter setting Door-mounted display enables safe and complete device diagnostics and parameter setting without opening the MCC door. Contextual LCD buttons provide intuitive navigation through monitoring menus. Optionally use control buttons for compact local control without the need for hardwiring. RUNNING LED ON: Running Flashing: Starting STOPPED LED ON: Stopped Flashing: Inhibited AUTO LED ON: Controlled by remote source Measurement module Frame size Current range (A) Current (I) sensing Voltage (V) sensing PTC sensing mm Yes.. CMA-2PI Yes. Yes CMA-2PP Yes Yes. CMA-2PV Yes Yes Yes CMA-2PA Yes.. CMA-005I 1-5 Yes. Yes CMA-005P Yes Yes. CMA-005V Yes Yes Yes CMA-005A The pass-through design measurement module samples the current, voltage, power and energy data consumed by the electric motor and continuously passes it electronically to the base control module via a cable connection. For applications with limited mounting space, users can mount the base control module directly onto the mm measurement module, achieving a best-in-class compact footprint., 55 and 90 mm frames provide direct pass-through capability from 0.3 to 136 A External current transformer (CT) kits available for applications up to 800 A Standard current-based monitoring and protection with options for voltage and PTC inputs 55 mm 90 mm Yes.. CMA-032I Yes. Yes CMA-032P Yes Yes. CMA-032V Yes Yes Yes CMA-032A Yes.. CMA-0I Yes. Yes CMA-0P Yes Yes. CMA-0V Yes Yes Yes CMA-0A Yes.. CMB-02I Yes. Yes CMB-02P Yes Yes. CMB-02V Yes Yes Yes CMB-02A Yes.. CMC-090I Yes. Yes CMC-090P Yes Yes. CMC-090V Yes Yes Yes CMC-090A Yes.. CMC-136I Yes. Yes CMC-136P Yes Yes. CMC-136V Yes Yes Yes CMC-136A 230 Power Distribution product guide eatoncorp.com.au December 1

Overload relays C Global motor management relay Base control module The core of the C system, the base control module contains all of the protection, monitoring and control algorithms in addition to

18 Overload relays C Global motor management relay Base control module The core of the C system, the base control module contains all of the protection, monitoring and control algorithms in addition to native I/O points. An interchangeable communication card slot allows for various communications with a single base unit. 1/ Vac or 2 Vdc power source options Four 1 Vac or 2 Vdc inputs, 2N/O and 1C/O relay outputs Optional communications USB, Modbus RTU, Modbus TCP, EtherNet/ IP, PROFIBUS DP Multiple pre-configured operation modes Power source Voltage range Digital inputs Relay outputs 1/ Vac Vac () 1 Vac (2) Form A, (1) Form C (non-latching) (2) Form A, (1) Form C (latching) () 2 Vdc (2) Form A, (1) Form C (non-latching) (2) Form A, (1) Form C (latching) 2 Vdc Vac () 1 Vac (2) Form A, (1) Form C (non-latching) (2) Form A, (1) Form C (latching) () 2 Vdc (2) Form A, (1) Form C (non-latching) (2) Form A, (1) Form C (latching) On-board communications CBA-SANN Modbus Serial CBA-SANM CBA-SALN Modbus Serial CBA-SALM CBA-SDNN Modbus Serial CBA-SDNM CBA-SDLN Modbus Serial CBA-SDLM CBD-SANN Modbus Serial CBD-SANM CBD-SALN Modbus Serial CBD-SALM CBD-SDNN Modbus Serial CBD-SDNM CBD-SDLN Modbus Serial CBD-SDLM External Current Transformers Use CTs and 1 5 A CMA-005_ measurement module. CT kit does not include measurement module (order separately) CT Range (A) Description Terminal Size :5 single-phase CT, 1.25 inch dia hole, UL and CSA ANSI/ IEEE C5.13, Hz, 600 Vac, 10 kv, relay class C50, accuracy 0.3% B0.1 (2) 8 32 brass terminals, comes with mounting bracket kit XCT :5 single-phase CT, 2.00 inch dia hole, UL and CSA ANSI/ IEEE C5.13, Hz, 600 Vac, 10 kv, relay class C50, accuracy 0.3% B :5 single-phase CT, 2.50 inch dia hole, UL and CSA ANSI/ IEEE C5.13, Hz, 600 Vac, 10 kv, relay class C50, accuracy 0.3% B0.1 (2) 8 32 brass terminals, comes with mounting bracket kit (2) 8 32 brass terminals, comes with mounting bracket kit XCT600-5 XCT800-5 Connection Cables and Accessories DE connection cables are required to connect the base control module to the measurement module and to the user interface. Order the appropriate lengths for each connection. User interface wiring harnesses are required to utilize the digital inputs on the user interface. Order one wiring harness per user interface to connect to these inputs. CXS-USBMICRO and CXS-USBLEADS are used to connect the Power Xpert incontrol tool (see next page for details). CXS-USBRJ12 is used for firmware upgrades. Description Connection cable (base control module to measurement module or user interface), 13 cm length, 600 V rating Connection cable (base control module to measurement module or user interface), 13 cm length, 1000 V rating Connection cable (base control module to measurement module or user interface), 25 cm length, 600 V rating Connection cable (base control module to measurement module or user interface), 25 cm length, 1000 V rating Connection cable (base control module to measurement module or user interface), 100 cm length, 600 V rating Connection cable (base control module to measurement module or user interface), 100 cm length, 1000 V rating Connection cable (base control module to measurement module or user interface), 0 cm length, 600 V rating Connection cable (base control module to measurement module or user interface), 300 cm length, 600 V rating Connection cable (base control module to measurement module or user interface), 300 cm length, 1000 V rating User interface digital inputs wiring harness, 50 cm, 16 AWG wires User interface digital inputs wiring harness, 100 cm, 16 AWG wires User interface digital inputs wiring harness, 0 cm, 16 AWG wires User interface digital inputs wiring harness, 300 cm, 16 AWG wires Spare parts kit terminal connectors, mounting feet Standard USB A male to micro USB male cable Standard USB A male to loose leads cable (for use with Modbus Serial terminals) Standard USB A male to RJ-12 cable (for firmware upgrades) DE-QPIP13 DE-QPIP13-HV DE-QPIP25 DE-QPIP25-HV DE-QPIP100 DE-QPIP100-HV DE-QPIP0 DE-QPIP300 DE-QPIP300-HV CXU-050 CXU-100 CXU-0 CXU-300 CXS-TERM CXS-USBMICRO CXS-USBLEADS CXS-USBRJ12 Power Distribution product guide eatoncorp.com.au December 1 231

19 5/13 5/13 Contactors Minicontactor relay, relay, contactor relay, contactor contactor combination DILER..., DILER..., DILER..., DILE(E)M..., DIULEM, DIULEM, DIULEM, SDAINLEM Motor Control Minicontactor relay, contactor Minicontactor combination relay, contactor combination Minicontactor relay, Minicontactor combination relay, contactor combination Dimensions Dimensions Dimensions Mini Mini contactor Mini Mini contactor contactor relays relays relays relays 5/13 5/13 Contactors DILER-...(-C) DILER-...(-C) DILER-...(-C) DILER-...-G(-C) DILER-...-G(-C) Minicontactor relay, Minicontactor combination relay, contactor combination Dimensions Minicontactor relay, relay, contactor contactor combination DILER..., DILER..., DILE(E)M..., DIULEM, DIULEM, SDAINLEM DILER-...(-C) DILER-...(-C) DILER-...(-C) +...DILE(-C) +...DILE(-C) +...DILE(-C) DILER-...-G(-C) DILER-...-G(-C)...DILE(-C) +...DILE(-C) +...DILE(-C) M M M M Mini Mini contactor contactor relays relays (5) (5) (5) (5) 83 (86) 83 (86) 83 (86) 83 (86) DILEEM-..., DILER-...(-C) DILEEM-..., DILER-...(-C) DILEEM-..., DILEM-...(-C), DILEM-...(-C), DILEM-...(-C), DILEM DILEM DILEM DILEEM-...-G, DILER-...-G(-C) DILEEM-...-G, DILEM-...-G(-C), DILEM-...-G(-C), DILEM G DILEM G c c c M M M M DILER-...(-C) DILER-...(-C) +...DILE(-C) +...DILE(-C) DILER-...-G(-C) +...DILE(-C) +...DILE(-C) Part Part no. no. Part no. c c cc1 c1 c1 DILE(E)M-...(-G) DILE(E)M-...(-G) DILE(E)M-...-G(-C) DILE(E)M-...-G(-C) M DILEEM-..., DILEEM-..., DILEM-...(-C), DILEM-...(-C), DILEM DILEM DILEEM-...-G, DILEM-...-G(-C), DILEM G c c c1 c1 c1 c1 DILER-... DILER-... DILER HDILE + HDILE + HDILE DILER G DILER G DILER G + HDILE + HDILE + HDILE ,3 65, DILE-... 2DILE MVDILE 2DILE-...-G DILER-... 2DILE-... DILER-... MVDILE 2DILE-...-G + MVDILE MVDILE HDILE + 2DILE-...-G + MVDILE HDILE + DILER G DILER G + HDILE + MVDILE HDILE Suppressor Suppressor circuit circuit 2DILE-... 2DILE MVDILE +...DILE 2DILE-...-G RCDILE... 2DILE-... RCDILE... + MVDILE + MVDILE +...DILE +...DILE 2DILE-...-G 2DILE-...-G MVDILE + MVDILE + MVDILE...DILE +...DILE + VGDILE VGDILE...DILE M 52 (5) 52 (5) 83 (86) 83 (86) M c1 65,3 65, M Part no. Part no. c c c1 c1 Suppressor DILE(E)M-...(-G) Suppressor circuit Suppressor circuit circuit RCDILE... DILE(E)M-...-G(-C) RCDILE RCDILE... VGDILE VGDILE VGDILE c ,3 65, Reversing contactors DIULEM 2DILE-... Reversing 2DILE-... Reversing contactors contactors DIULEM + MVDILE + MVDILE 2DILE-...-G 2DILE-...-G DIULEM + MVDILE + MVDILE Star-delta contactors SDAINLEM 2DILE-... Star-delta 2DILE-... Star-delta contactors contactors SDAINLEM + MVDILE + MVDILE +...DILE +...DILE 2DILE-...-G 2DILE-...-G SDAINLEM + MVDILE + MVDILE +...DILE +...DILE Basic devices up to 10 A, contactor relay Contactor Reversing Reversing contactors with contactors auxiliary contact module Basic devices up to 10 A, relay Contactor with auxilary auxiliary contact module DILER-... DILM...DILM15 DIULEM DILER-... DIULEM DILER TDDILE2 + TDDILE2 + TDDILE2 DILA... DILM...DILM15 DILA DILER-... DILER TDDILE2 + TDDILE (5.1) (5.1) ,, 3.2, 6.5, c Part no. c DILMC...DILMC Part no. c DILM32-XHI 11 Power Distribution product guide eatoncorp.com.au December DILAC... 1 DILA-XHI DILM32-XHI11 11 DILA-XHIC... DILA-XHI 11 DILA-XHI...T c ~125 ~125 ~125 ~125 ~ Contactor with auxiliary contact module DILM...DILM15 DILA... Basic devices up to 10 A, contactor relay Star-delta Star-delta contactors contactors Parallel Parallel SDAINLEM Parallel SDAINLEM connector connector connector P1DILEM P1DILEM P1DILEM x M 2 x M (5.1) Parallel Parallel connector connector Part P1DILEM no. P1DILEM c DILM32-XHI 11 0 DILA-XHI 11 DILA-XHI...T c

20 (5.1) 10.2 Part no. DILM32-XHI Part no. 11 c Dimensions DILM32-XHI DILA-XHI 11 Contactors DILA-XHI...T DILA-XHI...T 125 DILMC...DILMC15 DILMC...DILMC15 DILAC... DILAC... DILA-XHIC... DILA-XHIC... c c c x M 2 x M Motor Control 5/136 Contactors Basic devices up to 10 Basic devices up to 10 A, suppressor circuit Contactors DILM0...DILM2 DILM..., DILMF..., DILM (5.1) (5.1) 10.2 DILM1...DILM38 DILM1...DILM38 DILMC1...DILMC32 DILMC1...DILMC32 DILMF8...DILMF32 DILMF8...DILMF /136 Contactors Basic devices up to 10 A, suppressor circuit Contactors 3.2 DILM0...DILM Basic devices up to 10 A, suppressor circuit DILM..., DILMF..., DILM...XSP x M 2 x M x M DILM80...DILM /136.5 Contactors Basic devices up to 10 A, suppressor circuit Contactors DILM0...DILM2 Basic devices up 3.to A, suppressor. circuit DILM..., DILMF..., DILM...XSP Clearance at side to grounded Clearance parts: 6 mm at side to grounded parts: 6 mm Clearance at side to grounded parts: 6 mm DILM80...DILM10 2 x M x M Clearance at side to grounded parts: 6 mm Suppressor circuits Suppressor DILM...XSP... circuit 0 b b1 2 DILM80...DILM Clearance at side to grounded parts: 10 mm Suppressor circuits 156 DILM...XSP x M6 a c a b b c 0 Clearance at side to grounded parts: 10 mm Part no. a b DILM12-XSP DILM32-XSP DILM95-XSP Part no. b1 c DILM12-XSP DILM32-XSP DILM95-XSP Suppressor circuits DILM...XSP... 1 Power Distribution product guide eatoncorp.com.au December 1 Part no. a b DILM12-XSP

21 Dimensions Contactor with auxilary contact module Contactor with auxiliary contact module DILMP DILMP... 2 x M DILMP32 DILMP 2 x M Distance at side to grounded parts: 6 mm 138 Contactors DILMP DILMP80 2 x M Distance at side to grounded parts: 6 mm DILMP125 DILMP160 DILMP0 x M Clearance at side to earthed parts: 10 mm Motor Motor suppressor module DILM12-XMSM Power Distribution product guide eatoncorp.com.au December 1

22 Dimensions Complete units Complete units DILM185A...DILM500 DILM250-S...DILM50-S a2 a a DILM1000-XHI...-SI b DILM1000-XHI11-SA o 11 M6 b b3 a b a b2 b b1 e d1 f a1 d2 c 8 Part no. a a1 a2 b b1 b2 b3 d1 d2 e c f DILM185A DILM5A DILM DILM300A DILM DILM DILM DILM580...DILM1000 f M6 b 232 b b2 b3 5 a a d e 232 a DILM8-XHI...-SI b DILM8-XHI11-SA Part no. b2 b3 d1 e f DILM DILM DILM DILM DILM Power Distribution product guide eatoncorp.com.au December 1 2

23 Dimensions AC-1 contactors greater than 1000A DILH00 DILH..., DILM... M o DILM1600 DILH00 DILH00 M o DILH2600 M (32) o Power Distribution product guide eatoncorp.com.au December 1

24 Capacitor contactors, lamp contactors, contactor monitoring devices, SWD contactor modules Contactor for capacitors Contactor for capacitors DILK (6.) b a c 5/2 Contactors 5/2 Contactors a1 d b1 103 Part no..5 a b c a198 b1 d DILK x M DILK x M DILK x M 9. DILK x M DILK x M Accessories Contactor monitoring Accessories devices decives SWD contactor modules CMD(...) DILM...XDSB..., Accessories ETS-VS3, DILM...XTE, DILM12-XMC... DIL-SWD DILM...XDSB..., ETS-VS3, DILM...XTE, DILM12-XMC... Accessories DILM...XDSB..., 103 ETS-VS3, DILM...XTE, DILM12-XMC... Accessories Accessories Three-phase.5 commoning links 98 Accessories DILM12-XDSB... Three-phase commoning links links Three-phase commoning links links DILM12-XDSB... DILM12-XDSB... Part no. a Part Part no. no. a a Part DILM12-XDSB0/3 Part no. no. a 112 DILM12-XDSB0/ DILM12-XDSB0/ DILM12-XDSB0/ DILM12-XDSB0/ a 12.5 DILM12-XDSB0/5 DILM12-XDSB0/ a a DILM12-XDSB0/5 2 2 DILM12-XDSB0/5 2 2 Accessories Dimensions a a (6.) Contactor monitoring devices CMD(...) x M 6.5 Motor Control Electronic SWD contactor timer modules DIL-SWD Electronic DILM XTE Electronic timer timer modules timer timer modules DILM XTE DILM XTE Amplifier module Amplifier module ETS-VS3 Amplifier module ETS-VS3 ETS-VS Wiring set for motor feeder plug Wiring Wiring DILM12-XMCE set set for for motor feeder plug plug plug Wiring set set for for motor motor feeder feeder plug plug DILM12-XMCE DILM12-XMCE DILM12-XMCP/T DILM12-XMCP/T DILM12-XMCP/T 10 CA Z-EN DILM12-XMCP/E DILM12-XMCP/E DILM12-XMCP/E Power Distribution product guide eatoncorp.com.au December 1 23

25 Dimensions Contactors with terminal shrouds a DILM b for part no. a b DILM250, DILM300A DILM DILM DILM ~ DILM185A...DILM5A + DILM5A-XHB Contactor with star-point bridge and terminal shroud Contactors with star-point bridge and terminal shrouds DILM...XS1 for part no. a b DILM DILM DILM b a Mechanical interlock DILM500-XMV a for part no. a DILM8-XMV DILM Power Distribution product guide eatoncorp.com.au December 1

26 Overload relays 6/3 Overload relays Motor Control ZE, ZB ZE, ZB Dimensions Overload relays relays Overload Overload relays relays ZE- ZE- Base Base ZB32-XEZ ZB32-XEZ ZB65-XEZ ZB65-XEZ b b b2 b c2 c2 c 2 x d a1 b1 ZB32 ZB65 a 60 b c c a1 50 b1 5 5 b2 0.5 d M M a a = > 5 = > 5 ZB12 ZB12 ZB32 ZB a a b b OFF1 OFF 2 Reset/ON 2 Reset/ON a b 102 ZB32-38 ZB OFF 2 Reset/ON a b Automatic fault notification 2 2 View 10 fault que View trip snapshot a b a b CA Z-EN Power Distribution product guide eatoncorp.com.au December 1 239

27 Dimensions ZB Overload relays Overload relays ZB65 1 OFF 2 Reset/ON 0 12 a b ZB OFF 2 Reset/ON o a 5 b Power Distribution product guide eatoncorp.com.au December 1

28 Dimensions Overload relays ZB150-50/KK OFF 2 Reset/ON Z5, ZW Motor Control o 1 a 5 b Z5 overload relays replays greater greater than 150A than 150A Z5-.../FF OFF 2 Reset/ON a b a b Current transformer-operated overload overload relays relays ZW a 55 M 185 a Reset/ON 2 Power Distribution product guide eatoncorp.com.au December 1 21

29 6/0 Overload relays Motor Control Dimensions Electronic overload relays ZEB ZEB Electronic overload overload Electronic overload relays relays relays ZEB12 ZEB12 Electronic overload relays ZEB ZEB ZEB Power Distribution product guide eatoncorp.com.au December 1 10 CA Z-EN

30 Dimensions Electronic overload relays relays ZEB ZEB /KK Power Distribution product guide eatoncorp.com.au December 1 23

31 Dimensions Current Current sensors sensors ZEB-XCT300 ZEB-XCT ZEB-XCT1000 ZEB-XCT o EMT6 thermistor overload relays relays for machine for machine protection protection EMT6 External reset resetbutton n M-DZ-B M-DZ-X _> o Power Distribution product guide eatoncorp.com.au December 1

32 IEC Manual motor protectors Basic devices Add-on functions Mounting accessories 1. Motor-protective circuitbreaker PKZM01 Motor-protective circuitbreaker PKZM01 2. Motor-protective Page /3 circuitbreaker PKZM0 3. Motor-protective circuitbreaker PKZM0 with wide-range overload Page / protection PKE 1 2. Motor-protective circuitbreaker PKZM Motor-protective circuitbreakerwith wide-range 5. overload Door coupling protection handles IP65 6. Page /8 Shunt release. Motor-protective Standard auxiliary circuitbreaker Current PKZM limiters contacts 8. Page / 3 Standard auxiliary contacts Page /10 Shunt release 6 Page /29 Current limiters 8 Page /12 Door coupling handles IP65 5 Page / Insulated enclosure Page /16 Mounting/wiring Page / Power Distribution product guide eatoncorp.com.au December 1 2

adjustment range/overload release Ir (Amps) Short circuit release Irm (Amps) Maximum Motor Ratings Maximum kw Rating AC-3 P (kw) 3-Phase 0 - V 380-15V 0V PKZM01-1 Frame B (Type 1 & Type 2

33 Motor Protectors IEC Manual motor protectors Class 10 overload protection Motor applications from 0.1A to A Built-in heater & magnetic trip elements to protect the motor Adjustment dial for setting motor FLC Pushbutton manual motor protectors Rated Uninterrupted Current Iu = Ie (Amps) FLC adjustment range/overload release Ir (Amps) Short circuit release Irm (Amps) Maximum Motor Ratings Maximum kw Rating AC-3 P (kw) 3-Phase 0 - V V 0V PKZM01-1 Frame B (Type 1 & Type 2 Coordination) PKZM01-0,16 PKZM01-0,25 PKZM01-0, PKZM01-0, PKZM01-1 PKZM01-1,6 PKZM01-2,5 PKZM01- PKZM01-6,3 PKZM01-10 PKZM01-12 PKZM01-16 PKZM01- PKZM01-25 Rotary manual motor protectors Rated Uninterrupted Current Iu = Ie (Amps) FLC adjustment range/overload release Ir (Amps) Short Circuit Release Irm (Amps) Maximum Motor Ratings Maximum kw Rating AC-3 P (kw) 3-Phase 0 V V 0V 500V V PKZM0-1 PKZM-16 B (Type 1 & Type 2 Coordination) Frame D (Type 1 & Type 2 Coordination) PKZM0-0,16 PKZM0-0,25 PKZM0-0, PKZM0-0, PKZM0-1 PKZM0-1,6 PKZM0-2,5 PKZM0- PKZM0-6,3 PKZM0-10 PKZM0-12 PKZM0-16 PKZM0- PKZM0-25 PKZM0-32 PKZM-16 PKZM-25 PKZM-32 PKZM-0 PKZM-50 PKZM-58 PKZM- AK-PKZ0 Select manual motor protectors by full load amperes. Maximum motor ratings (kw) are for reference only. Note: Service Factor (SF) Setting Ir of current scale in dependence of load factor: SF = > Ir = 1 x In mot SF = 1 -> Ir = 0.9 x In mot Eaton PKZM0 & PKZM handles are not padlockable. Order part no. AK-PKZ0 handle if a lockable handle is required. Lockable rotary handle for MMPs For use with PKZM0 & PKZM AK-PKZ0 26 Power Distribution product guide eatoncorp.com.au December 1

Motor Protectors Electronic Motor-protective circuit-breaker PKE Switch & protect motors up to 65 A with electronic wide-range overload protection. Modular design. Highest level of flexibility.

34 Motor Protectors Electronic Motor-protective circuit-breaker PKE Switch & protect motors up to 65 A with electronic wide-range overload protection. Modular design. Highest level of flexibility. Highest level of performance. The selection of a suitable motor-protective circuit-breaker is decisive for the functional safety & service life of a motor. Motor-protective circuit-breakers PKE with electronic overload protection offer an interesting alternative to the bimetal solution here & complement the intelligent PKZ series from Eaton. The motor-protective circuit-breaker PKE provides the highest level of flexibility featuring a compact & modular design with plug-in control unit for motor currents up to 65 A. The large current setting ranges decisively reduce the number of variants & minimise the engineering work & costs accordingly. PKE 12, 12A ( mm) PKE features & benefits: Autonomous supply via current transformer Large electronically controlled setting range Exchangeable control units Tripping classes greater than CLASS 10 Precise & extremely long-time stable tripping characteristic curves Minimum heat losses Protection suited to individual starting conditions Motor starter design with standard components Common range of accessories from system PKZ0 Parameter data read out options Very service friendly Reduction of engineering time & costs Advanced control unit includes a COM interface for SmartWire 0.3A 12A kw (00 V) PKE 32, 32A ( mm) Motor rating Rated motor current AC-3 V 15V 660 V 690 V kw A A A Motor-protective circuit-breaker, Coordination type 1 & Overload release setting range Base unit Control unit Standard Control unit Advanced (with COM interface) A PKE12 PKE-XTU-1,2 PKE-XTUA-1, A PKE12 PKE-XTU- PKE-XTUA A PKE12 PKE32 PKE-XTU-12 PKE-XTUA A PKE32 PKE-XTU-32 PKE-XTUA-32 5 plug-in control units up to 65 A in 2 versions. Standard Extended 0.3A 1.2A 1A 3A 32A kwa (00 V) PKE 65, 65A (55 mm) 8A 65A - 3 kw (00 V) 3A A 8A 12A 16A 32A 65A Power Distribution product guide eatoncorp.com.au December 1 2

Motor Protectors Electronic motor-protective circuit-breaker PKE PKE-XTUA-32 PKE-XTUWA-32 Rated motor current AC-3 Motor rating 660 V V 15V 690 V kw A A A Motor-protective circuit-breaker,

12.6 15-29.3 1 18.5 - -.9 - - 23.8 30 - - 58 Overload release setting range Base unit Control unit Standard Control unit Advanced (with COM interface) 8... 32 A PKE32 PKE-XTU-32 PKE-XTUA-32 16.

35 Motor Protectors Electronic motor-protective circuit-breaker PKE PKE-XTUA-32 PKE-XTUWA-32 Rated motor current AC-3 Motor rating 660 V V 15V 690 V kw A A A Motor-protective circuit-breaker, Coordination type 1 & Overload release setting range Base unit Control unit Standard Control unit Advanced (with COM interface) A PKE32 PKE-XTU-32 PKE-XTUA A PKE65 PKE-XTU-65 PKE-XTUA A PKE65 PKE-XTUW-32 PKE-XTUWA-32 PKE-SWD-SP Smartwire-DT module for connecting PKE-XTUA trip block to Smartwire-DT Description Messages Contactor state PKS Motor current and thermal motor image in % PKE-SWD-SP Trip indicators Set value overload releases Remote disconnection of motor-protective curicuit breakers NHI-PKZ0 IEC manual motor protectors accessories Auxiliary contacts Contact configuration Side-Mount 2NO-1NC 1NO-2NC Front-Mount 1NO Trip indicating aux. contact NHI11-PKZ0 NHI-PKZ0 NHI12-PKZ0 NHI-E-11-PKZ0 NHI-E-10-PKZ0 AGM2-10-PKZ0 AGM2-01-PKZ0 VHI-PKZ0 Early-make auxiliary contacts Contact configuration For use with.. 2N/O PKZM0 PKZM0-T PKM0 VHI-PKZ0 PKZM 2N/O PKZM01 VHI-PKZ01 28 Power Distribution product guide eatoncorp.com.au December 1

36 Motor Protectors Electronic motor-protective circuit-breaker PKE IP65 rotary handle mechanism - PKZM0 Description Complete Kits Includes Handle, Shaft & Required Hardware Rotary Handle Mechanism IP65 Black For use on main switches to IEC / EN 60. Rotary Handle Mechanism IP65 Red / Yellow For use on main switch with Emergency-Stop function to IEC / EN 60. Rotary Handle Mechanism IP65 Black For use on main switches to IEC / EN 60 where PKZ0 is mounted 90 from vertical. Rotary Handle Mechanism IP65 Red / Yellow For use on main switch with Emergency-Stop function to IEC / EN 60 where PKZ0 is mounted 90 from vertical. Rotary Handle Mechanism IP65 Black For use on main switches to IEC / EN 60 where PKZ0 is mounted 90 from vertical. FOR USE WITH xenergy PKZ0-XH PKZ0-XRH PKZ0-XH-MCC PKZ0-XRH-MCC PKZ0-XHT-MCC With ON/OFF switch position & + (tripped), lockable with 3 padlocks, 8 mm hasp. Can be locked in the OFF position, if required. Rotary handle mechanisms ship with door interlock disabled. See instruction publication with product for how to enable door interlock. Not for use with VHI-PKZ0 early-make front-mount auxiliary contact. IP65 rotary handle mechanism - PKE Description For use as main switch to IEC/EN 60 black PKE-XH For use as main switch with Emergency-Stop function to IEC/EN 60 red-yellow PKE-XRH For use as a main switch to EN 60 in MCC power distribution systems and with PKE installed when rotated by 90 black PKE-XH-MCC For use as a main switch to EN 60 in MCC power distribution systems and with PKE installed when rotated by 90 red-yellow PKE-XRH-MCC For use as a main switch to EN 60 in MCC power distribution systems and with PKE installed when rotated by 90 FOR USE WITH xenergy black PKE-XHT-MCC Shunt release PKZ0-XH PKZ0-XRH-MCC A-PKZ0(110V50HZ) Voltage 2 vac 110 vac vac 15 vac 2 vdc A-PKZ0(2V50HZ) A-PKZ0(110V50HZ) A-PKZ0(V50HZ) A-PKZ0(15V50HZ) A-PKZ0(2VDC) Undervoltage release Voltage 2 vac 110 vac vac 15 vac 2 vdc U-PKZ0(2V50HZ) U-PKZ0(110V50HZ) U-PKZ0(V50HZ) U-PKZ0(15V50HZ) U-PKZ0(2VDC) U-PKZ0(2VDC) Sealing facility Description To prevent tampering with the overload release & the test function (For use with PKZMO & PKZM) PL-PKZ0 PL-PKZ0 Current limiters Description For increasing switching capacity of motor-protective circuitbreakers without auto-protection CL-PKZ0 CL-PKZ0 Power Distribution product guide eatoncorp.com.au December 1 29

37 Motor Protectors IEC Manual motor protectors accessories Three-phase commoning links For Use with... Frame B MMP With No Side-Mounted Auxiliaries or Voltage Releases Qty. MMP Length of link (mm) Unit width (mm) 2 90 B3.0/2-PKZ0 3 1 B3.0/3-PKZ0 180 B3.0/-PKZ0 5 5 B3.0/5-PKZ B3.1/2-PKZ0 For motor-protective circuit-breaker each with an auxiliary contact or trip-indicating auxiliary contact fitted on the right B3.1/3-PKZ0 + 9 B3.1/-PKZ B3.1/5-PKZ0 For PKZM0-... with one auxiliary contact each & a trip-indicating auxiliary contact fitted on right or a voltage release fitted on left Shroud for unused terminals. Protection against direct contact. For closing off non-used connections on the three phase commoning link. B3...-PKZ0 Frame D MMP With No Side-Mounted Auxiliaries or Voltage Releases B3.2/2-PKZ B3.2/-PKZ H-B3-PKZ B3.0/2-PKZ B3.0/3-PKZ 0 55 B3.0/-PKZ For motor-protective circuit-breakers/starters each with an auxiliary contact or trip-indicating auxiliary contact fitted on the right & with a DIL1(A)M contactor For PKZM with one auxiliary contact each or trip-indicating auxiliary contact fitted on right or a voltage release fitted on left B3.1/2-PKZ B3.1/3-PKZ - - B3.1/-PKZ B3.2/2-PKZ - - B3.2/-PKZ Shroud for unused terminals. Protection against direct contact. To cover unused terminals on threephase commoning link H-B3-PKZ Protected against accidental contact. B-Frame short circuit proof Ue = 690V, Iu = A; D-Frame short circuit proof Ue = 690V, Iu = 128A. Frame B links can be combined by rotating mounting. Frame D links cannot be combined. + MMP w/1 aux. (2, 3,, 5 module) + trip indicating etc. for frames B & D. Incoming terminal for three-phase commoning link For use with... B-Frame PKZM0/PKE PKZM BK25/3-PKZ0 BK50/3-PKZ-E For three-phase commoning link, protected against accidental contact, Ue = 690V, Iu = A; for conductor crosssections: mm2 stranded; mm2 flexible with ferrules, AWG Power Distribution product guide eatoncorp.com.au December 1

38 Motor Protectors IEC Manual motor protectors accessories Combination connection kits for connection of rotary MMP with IEC contactor For use with... Description Non-Reversing Starters PKE/PKZMO + DILM-15 DS (-12A) Comprised of: Mechanical connection element for PKZM0 & contactor Main current wiring between PKZM0 & contactor in tool-less plug connection Cable guidance Use contactor auxiliary switch DILA-XHIT... Control cable guidance: max. 6 cables up to 2.5 mm 2 external diameter or cables up to 3.5 mm 2 external diameter. PKZM0-XDM12 PKZM0-XDM12 PKZMO + DILM1-32 PKZM + DILM0-65 Reversing starters PKZM0, PKE + DILM-01 DILM9-01 DILM12-01 PKZM0, PKE + DILM1 DILM25 DILM32 Wiring kit PKZM0, PKE + DILM1 DILM25 DILM32 DS-3 SX016 DS-3 SX02 SX032 PKZM + DILM0 DILM50 DILM65 Comprised of: DIN-Rail adapter plate Main current wiring between PKZM0 & contactor Consists of: Mechanical connection element for PKZM0 and contactor Reversing starters main supply wiring with tool-less plug connection Consists of: Top-hat rail adapter plates Reversing starters supply wiring Main supply wiring between PKZM0 and contactor Use only in combination with busbar adapter or mounting rail adapter plate Main current supply between PKZM and contactor PKZM0-XDM32 PKZM-XDM65 PKZM0-XRM12 PKZM0-XRM32 PKZM0-XM32DE PKZM-XM65DE PKZM-XDM65 PKZM0-XM32DE Insulated enclosures for surface mounting Degree of protection For use with... Description PKZM01 Pushbutton Manual Motor Protectors IP65 With operating membrane CI-PKZ01-G IP65 PKZM01 With Emergency-Stop (E-Stop) pushbutton actuator, Red-Yellow CI-PKZ01-PVT D-Frame (10 65A) PKZM0/PKZM Rotary Manual Motor Protectors IP65 PKZM With black/grey rotary handle CI-K-PKZ-G With black/grey rotary handle CI-K2-PKZ0-G IP65 PKZM0 With red/yellow rotary handle for use as Emergency-Stop CI-K2-PKZ0-GR switches to IEC/ EN 60 With red/yellow rotary handle IP65 PKZM for use as Emergency-Stop switches to IEC / EN 60 CI-K-PKZ-GR Integrated terminal for PE(N) connection. % Metric knockouts: Top bottom: M25/M32. In backplate: M25/M32. Control cable entry: M. MMP enclosure accessories (padlock attachment) For use with... Description CI-K2-PKZ0-GR & CI-K2-PKZ0-G CI-K-PKZ-GR & CI-K-PKZ-G Padlocking feature. Up to 3 padlocks with 3 6 mm hasp thickness. For use as main switch to IEC/EN 60. More enclosures are available. Contact your local sales office for more information. Lockable in the 0-position of the XTPR manual motor protector. SVB-PKZ0-CI SVB-PKZ-CI CI-PKZ01-PVT CI-K2-PKZ0-G SVB-PKZ0-CI Power Distribution product guide eatoncorp.com.au December 1 251

39 BBA0-25 BBA0R-32 BBAL- Motor Protectors IEC Motor control busbar adapters Busbar adapter, 3 pole Rated operational voltage Ue = 690 V. For mounting on CU flat busbars with 60 mm interval between busbar centres, suitable for 5 mm & 10 mm busbar thickness. Rated operational current, Ie, A Width (mm) Length (mm) For use with... For direct-on-line starters 25 0 PKE/ PKZM0 + DILM PKE/ PKZM0 + DILM9 PKE/ PKZM0 + DILM12 BBA0-25 PKE/ PKZM0 + DILM PKE/ PKZM0 + DILM1 PKE/ PKZM0 + DILM25 BBA0-32 PKE/ PKZM0 + DILM PKZM + DILM1 PKZM + DILM25 PKZM + DILM32 PKZM + DILM0 BBAL- PKZM + DILM50 PKZM + DILM65 For reversing starters PKE/ PKZM0 + 2 x DILM-01 PKE/ PKZM0 + 2 x DILM9-01 BBA0R-25 PKE/ PKZM0 + 2 x DILM PKE/ PKZM0 + 2 x DILM1-01 PKE/ PKZM0 + 2 x DILM25-01 PKE/ PKZM0 + 2 x DILM32-01 BBA0R-32 Empty module, without electrical contacts 0 BBA0/2TS-L 5 0 BBA/2TS-L Side mounted module, can be plugged into both sides 9 0 BBA-XSM BBA-XSM 252 Power Distribution product guide eatoncorp.com.au December 1

40 Dimensions Motor Protectors Motor-protective circuit breaker PKZM01 PKZM01, PKZM0 Motor Control Motor-protective circuit-breaker breaker Transformer-protective circuit-breakers breakers Motor-protective circuit-breaker breaker with with auxiliary contacts PKZM0- (+NHI-E- -PKZ0) PKZM0- -T(+NHI-E- -PKZ0) PKM0- (+NHI-E- -PKZ0) 0 Motor-protective circuit circuit-breakers with lockable rotary handles lockable rotary handles PKZM0- +AK-PKZ0.5 AK-PKZ NHI-E-..-PKZ0 NHI-E-..-PKZ0 AK-PKZ Current limiters CL-PKZ 28 Motor-protective circuit breaker with early-make Motor-protective auxilary circuit-breakers contacts with early-make auxiliary contacts PKZM0- +VHI- -PKZ0 80 a VHI...-PKZ VHI...-PKZ Top-hat rail IEC/EN Stabdard Standard auxiliary contacts contacts i Trip Tripindicators d Shunt Shunt release - Undervoltage undervoltage release release NHI -PKZ0 AGM2 -PKZ0 A-PKZ0 U-PKZ Power Distribution product guide eatoncorp.com.au December 1 253

41 -protective circuit-breakers PKZM01, PKZM0, PKZM, PKE apters Dimensions Motor Protectors Busbar adaptors Busbar adapters BBA0-25 BB- BBA0-25/2TS BB-/2TS BBA0/2TS-L BBA0-32 BBA0-32/2TS-C BBA0C-16 BBA/2TS-L BBAL- a b c e f 0 0 a 0 a b c d e f 60 a b 60 a b a c d a b e f 60 a a b 60 -L 10 2 a BB-/2TS b BB- a BBA0-32/2TS-C b BBA0-25/2TS c BBA0C-16 BB-80/2TS-S d BBA0/2TS-L e BBA0-25 f BBA a BBAL- b BBA/2TS-L Motor-protective circuit-breakers PKZM01, PKZM0, PKZM, PKE BBL- 10 Accessories PKZM01 /3 Accessories Insulated enclosures for surface mounting 0 Insulated enclosures for surface mounting CI-PKZ01 CI-PKZ01-PVT CI-PKZ01-SVB CI-PKZ01-G CI-PKZ01-PVS CI-PKZ01-SVB-V /2 BBA0K-32 Motor-protective circuit-breakers PKZM0-XCL PKZM01, PKZM0, PKZM, PKE Insulated enclosures for flush mounting PKZM0-XCL-2 Accessories E-PKZ01 E-PKZ01-G Accessories Door coupling handles Door coupling handles PKZ0-X(R)H Accessories BBA a b Mounting depth: 100 to mm from the top edge of the top-hat rail to the front edge of the cabinet door/cover Distance between switch axis and cover hinge: at least 100 mm b E-PKZ01-PVT E-PKZ01-PVS eaton.com a E-PKZ01-SVB Insulated enclosures for flush mounting E-PKZ01-SVB-V E-PKZ0-G Power Distribution product guide eatoncorp.com.au 69 December 1 69 R 10 1 At least 100 mm from cover hinge a PKZM0-XCLMounting aperture E-PKZ0 b PKZM0-XCL

42 Dimensions Motor Protectors Insulated enclosures for surface mounting CI-PKZ0-M CI-PKZ10G...M CI-PKZ0- M + SVB-PKZ0-CI Drilling dimensions CI-PKZ0- M SVB-PKZ0-CI CI-K2-PKZ0 CI-K2-PKZ0G(R)(V) CI-K2-PKZ0-G(R)(V) + SVB-PKZ0-CI Drilling dimensions CI-K2-PKZ M SVB-PKZ0-CI M Power Distribution product guide eatoncorp.com.au December 1 255

43 Dimensions Motor ProtectorsPKZM, PKE Motor-protective circuit-br breakers PKZM- eaker Standard auxiauxiliary contacts contacts NHI -PKZ NHI -PKZ NHI-E NHI-E... Motor-protective circuit-breakers with lockable cover PKZM- +AK-PKZ0 cover Trip Trup indicator indicators s AGM2 -PKZ AGM2 -PKZ0 AK-PKZ PKE PKE Motor-protective circuit-breakers PKE12, PKE32 PKE Power Distribution product guide eatoncorp.com.au December 1

44 Dimensions Motor Protectors Three-phase commoning links B3.0/-PKZ B3.2/-PKZ PKZM0, PKZM Motor Control B3.0/3-PKZ B3.2/2-PKZ B3.0/2-PKZ B3.1/3-PKZ B3.1/-PKZ B3.1/2-PKZ Accessories Three-phase commoning links B3.0/-PKZ0 B3.0/2-PKZ0 Three-phase commoning links B3.2/-PKZ0 B3.2/2-PKZ0 180 (90) 23 H-B3- PKZ 0 2 H-B3- PKZ0 2 Three-phase commoning links B3.1/5-PKZ0 B3.1/3-PKZ0 B3.1/-PKZ0 B3.1/2-PKZ0 H-B3- PKZ (, 153, 99) 2 5 Incoming terminals BK25/3-PKZ0 F BK25/3-PKZ0 3 8 Overlapping mounting to extend the three-phase commoning link F 1 B3...-PKZ0 Motor plug DILM12-XMCP/T Power Distribution product guide eatoncorp.com.au December 1 25

45 Dimensions Motor Protectors Insulated enclosures for surface mounting CI-K-PKZ-G(R) +SVB-PKZ-CI CI-K-PKZ-G SVB-PKZ-CI Drilling dimensions CI-K-PKZ-G(R) o Power Distribution product guide eatoncorp.com.au December 1

Display, Switch, Control and Set Simply easy The control relay easy500/00/800 offer all the technical opportunities to implement

A host of different device versions with various functions, voltage types, expansion and networking options are available for

With their different performance classes easy500, easy00 and easy800, the easyrelays provide the optimum solution for small,

The combination of a control relay easy800 with direct connection to the communication system for SmartWire-DT switchgear

46 Display, Switch, Control and Set Simply easy The control relay easy500/00/800 offer all the technical opportunities to implement solutions in industry and building automation, machine engineering and in apparatus construction as well as trade applications. A host of different device versions with various functions, voltage types, expansion and networking options are available for implementing the right solution. With their different performance classes easy500, easy00 and easy800, the easyrelays provide the optimum solution for small, medium and large control tasks. The combination of a control relay easy800 with direct connection to the communication system for SmartWire-DT switchgear provides an innovative solution in control panel design and construction. The renowned simple handling of easyrelay and the efficient SmartWire-DT connection technology provide considerable savings in terms of time and costs during planning, commissioning and maintenance. Power Distribution product guide eatoncorp.com.au December 1 259

Starters DOL starters IP65 Surface mounting starter, fitted with start & stop/reset pushbuttons. EDOL0NO kw(00-15vac) AC-3 Amps Coil voltage Aux.

5 12 15 1NO 90 x 18 x 113 EDOL55NO15.5 16 15 1NO 90 x 18 x 113 EDOL5NO15 11 15 1NO 100 x 19 x 123 EDOL11NO15 Order Overloads Separately. Overload relays EDOL25TOL Full load current (A) 0. - 0.

3 EDOLTOL 5.5 -.5 EDOL5TOL.2-10 EDOL100TOL 9.0-12.5 EDOL125TOL 11.3-16 EDOL16TOL 15.0 -.0 EDOLTOL 1.5 -.5 EDOL5TOL.0-25.0 EDOL250TOL 2.5-30.

47 Starters DOL starters IP65 Surface mounting starter, fitted with start & stop/reset pushbuttons. EDOL0NO kw(00-15vac) AC-3 Amps Coil voltage Aux. contacts Dimensions (W x H x D) mm 11 1NO 90 x 18 x 113 EDOL0NO NO 90 x 18 x 113 EDOL55NO NO 90 x 18 x 113 EDOL5NO 11 1NO 100 x 19 x 123 EDOL11NO NO 90 x 18 x 113 EDOL0NO NO 90 x 18 x 113 EDOL55NO NO 90 x 18 x 113 EDOL5NO NO 100 x 19 x 123 EDOL11NO15 Order Overloads Separately. Overload relays EDOL25TOL Full load current (A) EDOL0TOL EDOL0TOL EDOL08TOL EDOL10TOL EDOL1P3TOL EDOL1P6TOL EDOL02TOL EDOL25TOL EDOL32TOL EDOL0TOL EDOL8TOL EDOLTOL EDOL5TOL.2-10 EDOL100TOL EDOL125TOL EDOL16TOL EDOLTOL EDOL5TOL EDOL250TOL EDOL30TOL 1NO/1NC Electrically Separated Auxiliary Contacts. Single - phase sensitivity for phase imbalance & phase loss protection. Temperature Compensated. Spare coils EDOLCOILA Coil voltage (AC) 2V 32V 110V V 15V 80V 12V Coils suit all starter sizes. EDOLCOIL2A EDOLCOIL32A EDOLCOIL110A EDOLCOILA EDOLCOIL15A EDOLCOIL80A EDOLCOIL12A 260 Power Distribution product guide eatoncorp.com.au December 1

48 Contactor combinations Reversing combinations Motor Control Moeller SK GB-AUS Moeller SK GB-AUS AC operation Max. rating for three-phase Part no. Price ($) Individual components of the combination Spare auxiliary contacts Notes Notes motors, Hz Product Starters group 0 AC-3 AC- Contactor Contactor Q12 Q12 Mechanical DOL starters interlock Contactor combinations 5/11 380/15 V 380/15 V Rated operational Max. rating for threephase motors, Hz Part no. Part no. DOL starter Reversing combinations Individual components of the combination P P current kw kwmoeller AC-3, SK GB-AUS 15 V AC-3, 80/ Moeller AC-, SK GB-AUS 80/ Contactor Contactor Q12 Ie, A 15 V P, kw 15 V P, kw AC operation 2.5 DOLRS/U(...V50HZ) ase Part no. Price ($) 1) DILM9-01 DILM9-01 Open units Reversing contactors Individual components of the combination Spare auxiliary contacts Notes Notes + DILA-XHI + DILA-XHI Product DOLRS5.5/U(...V50HZ group 0 1) DILM9-01 DILM DILA-XHI DILM12-01 DILM DILA-XHI + DOLRS/U(...V50HZ) Contactor Contactor + DILA-XHI Q12 + DILA-XHI II Q12 Mechanical DOLRS.5/U(...V50HZ) 1) interlock DILM12-01 DILM1-01+ DILA-XHI DILM1-01 DILM DILA-XHI + DOLRS5.5/U(...V50HZ Q12 I V + DILA-XHI + DILA-XHI DOLRS/U(...V50HZ) DILM DILA-XHI DILM DILA-XHI DOLRS.5/U(...V50HZ) Q Part no. Part no DOLRS11/U(...V50HZ) 1) DILM Q DILM DILA-XHI DILM DILA-XHI DOLRS11/U(...V50HZ) + DILA-XHI + DILA-XHI U V W Q12 15 DOLRS15/U(...V50HZ) 1) M DILM DILA-XHI DILM32-01 DILM DILA-XHI + DOLRS15/U(...V50HZ) M1 3 DOLRS/U(...V50HZ) 1) DILM9-01 DILM DILA-XHI + DILA-XHI Reversing contactors DILA-XHI + DILM0 DILA-XHI+ DILM150-XHI11 DILM0 + DILM150-XHI11 DOLRS18.5/U(...V50HZ) DOLRS18.5/U(...V50HZ) 1) 1,0.10 DILM0 DILM0 0 + DOLRS5.5/U(...V50HZ 1) DILM12-01 DILM DILM150-XHI11 + DILM150-XHI DOLRS/U(...V50HZ) 10 DOLRS/U(...V50HZ) 1) 1, DILA-XHI + DILA-XHI II DOLRS.5/U(...V50HZ) 1) DOLRS30/U(...V50HZ).50 1) II 1,6.90 DILM1-01 DILM1-01 DILM DILM65 + DILM150-XHI11 DILM65 + Q12 IDILM150-XHI11 DOLRS30/U(...V50HZ) Contactor combinations 5/ DILA-XHI + DILA-XHI + DILM150-XHI11 + DILM150-XHI I Q Enclosed units Reversing combinations Q12 DOLRS11/U(...V50HZ) 1) DILM25-01 DILM Q DILA-XHI + DILM9-01 DILA-XHI + DILA-XHI DILM DILA-XHI DOLRS/I(...V50HZ) Q12 U V W Q12 Moeller SK GB-AUS Moeller SK GB-AUS DOLRS15/U(...V50HZ) 1) M 95. DILM32-01 DILM M1 Q DILM DILA-XHI DILM DILA-XHI DOLRS5.5/I(...V50HZ) 3 + DILA-XHI + DILA-XHI (-)N AC operation Max. rating DOLRS18.5/U(...V50HZ) for three-phase 2.5 1) DOLRS/I(...V50HZ) Part 1,0.10 no..5 1) Price ($).5 DILM0 DILM0 DILM1-01 DILM9-01 Individual + components DILA-XHI DILM9-01 of the combination + DILM1-01 Spare auxiliary + DILA-XHI contacts + DOLRS.5/I(...V50HZ) Notes Reversing Notes DOLRS/I(...V50HZ) contactors + DILM150-XHI11 + DILM150-XHI11 0 motors, Hz Product + DILA-XHI + DILA-XHI DOLRS/U(...V50HZ) 1) , group 0 6 DILM DILA-XHI DILM DILA-XHI DOLRS11/I(...V50HZ) DOLRS5.5/I(...V50HZ) 1) DILM12-01 DILM12-01 DOLRS30/U(...V50HZ) 1) II + AC-3 AC- 1,6.90 DILM65 DILM Contactor DILA-XHI + Contactor DILA-XHI Q12 Q12 Mechanical II DILM150-XHI11 + DILM32-01 DILM150-XHI11+ DILA-XHI DILM DILA-XHI interlock 13 DOLRS15/I(...V50HZ) I.5.5 DOLRS.5/I(...V50HZ) 1) DILM1-01 DILM Q12 380/15 V 380/15 V I + DILA-XHI + DILA-XHI Q DILM0 + DILM150-XHI11 DILM0 + DILM150-XHI11 DOLRS18.5/I(...V50HZ) DOLRS11/I(...V50HZ) 1) Q P P 1, DILM25-01 Part no. DILM25-01 Part no. + Q DILA-XHI + DILA-XHI - DOLRS/I(...V50HZ) Q12 kw kw Q12 15 DOLRS15/I(...V50HZ) 1) 1,.90 DILM32-01 DILM32-01 U V W DILM65 + DILM150-XHI11 DILM65 + (-)N DILM150-XHI11 DOLRS30/I(...V50HZ) Q12 + DILA-XHI + DILA-XHI M M DOLRS/I(...V50HZ) 9 1) DOLRS/U(...V50HZ) DOLRS18.5/I(...V50HZ) ) DILM9-01 DILM9-01 1) Reversing contactors 1,.90 DILM9-01 DILM DILM0 DILM0 + Reversing Specify voltage & frequency when ordering. + DILA-XHI + DILA-XHI contactors Reversing contactors + DILA-XHI + DILA-XHI + DILM150-XHI11 + 0DILM150-XHI DOLRS5.5/I(...V50HZ) 10 3 Standard voltages: 1) DOLRS/I(...V50HZ) DOLRS5.5/U(...V50HZ V AC: 2 V, ) 110 1) V, 1, V, 15 V at 50 Hz. DILM12-01 DILM DILM12-01 DILM DILA-XHI + II DILA-XHI DOLRS30/I(...V50HZ) 1) II II Non-standard voltages: V AC: , V at 50 or + DILA-XHI 60 Hz. + IIDILA-XHI II DILM65 DILM DOLRS.5/I(...V50HZ) 1) DOLRS.5/U(...V50HZ) + DILM150-XHI11 + DILM150-XHI ) 13 V DC: V. For DC voltage add suffix.50 -G to Item No. DILM1-01 DILM Q12 DILM1-01 DILM1-01 I I + I I 13 Q DILA-XHI + DILA-XHI 13 I + DILA-XHI + DILA-XHI 5 5 Q N.B. additional charge applies. Please enquire for nonstandard configurations. 1, DILM25-01 DILM Q12 Q12 Q DOLRS11/I(...V50HZ) 1) Q DOLRS11/U(...V50HZ) 1) DILA-XHI + DILA-XHI DILM25-01 DILM25-01 Q12 Q12 + Q12 Q12 Q12 + DILA-XHI + DILA-XHI DOLRS15/I(...V50HZ) 1) U V W 1,.90 DILM32-01 DILM32-01 U V W Q12 Q12 Q12 Q12 Q12 15 DOLRS15/U(...V50HZ) 1) DILA-XHI + DILA-XHI DILM32-01 (-)N DILM M (-)N M1 M 3 M1 + DILA-XHI + DILA-XHI 3 ge and frequency DOLRS18.5/I(...V50HZ) when ordering. 1) 1,.90 DILM0 DILM DOLRS18.5/U(...V50HZ) + DILM150-XHI11 + DILM150-XHI11 0 ltages: V AC: 2 V, 110 V, V, 15 V at 50 Hz 1) 1,0.10 DILM0 DILM0 + Star-delta starters + DILM150-XHI11 + DILM150-XHI11 rd voltages: DOLRS/I(...V50HZ) V AC: V at 1) 0 or 60 Hz1,36.30 DOLRS30/I(...V50HZ) V DC: V DOLRS/U(...V50HZ) 1) II 1, Max. rating 1) for Max. 1,26.60 DILM65 DILM65 + ge add 30suffix -G to part 12no. Rated DOLRS30/U(...V50HZ) 1) II 1, DILM150-XHI11 + DILM150-XHI11 DILM65 DILM three-phase change nal charge applies. operational Individual components + DILM150-XHI11 of the + DILM150-XHI11 combination I motors, over I Q12 13 current ire for non-standard configurations Hz time Q Q12 AC-3, Star-delta AC-3, 380/15 V Mains contactor Delta contactor Star Q12 contactor 380/15 V S Q12 starter P, kw (-)N Q12 Ie, A Item No. Q15 Item No. Q13 Item No. Item No. (-)N ring. V, V, 15 V at 50 Hz2.5Star-delta DOLRS/I(...V50HZ) starter combinations 1) DILM9-01 DILM Reversing contactors V at 50 or 60 Hz + DILA-XHI + DILA-XHI 0 V Open units - Timing relay K1T: ETR-51, Complete with overload DOLRS5.5/I(...V50HZ) GST not included. 1) DILM12-01 DILM SDES5.5-U + DILA-XHI + DILA-XHI II DILM-10 + DILA-XHI DILM-01 + DILA-XHI DILM-01 + DILA-XHI SDES5.5/U(...) DOLRS.5/I(...V50HZ) 1) DILM1-01 DILM Q12 I 13 ations. + DILA-XHI + DILA-XHI DILM DILA-XHI DILM DILA-XHI DILM-01 + DILA-XHI SDES.5/U(...) 11 6 DOLRS11/I(...V50HZ) 1) Q , DILM25-01 DILM DILM DILA-XHI + DILA-XHI DILM DILA-XHI + DILA-XHI DILM-01 + DILA-XHI SDES11/U(...) Q12 15 DOLRS15/I(...V50HZ) 1) U V W 1,.90 DILM32-01 DILM DILM DILA-XHI DILM DILA-XHI DILM DILA-XHI Q12SDES15/U(...) + DILA-XHI + DILA-XHI M M DOLRS18.5/I(...V50HZ) 1) 1,.90 DILM DILA-XHI DILM0 DILM25-01 DILM0 + DILA-XHI DILM DILA-XHI SDES/U(...) + DILM150-XHI11 + DILM150-XHI GST DOLRS/I(...V50HZ) not included 30 1) 1,36.30 DILM DILA-XHI DILM DILA-XHI DILM DILA-XHI SDES30/U(...) DOLRS30/I(...V50HZ) 1) SK1158AUS_05_ fm Seite 8 Donnerstag, 2. Oktober 08 3:38 15 II 1, DILM65 DILM DILM0 + DILM150-XHI11 + DILM150-XHI11 DILM0 + DILM150-XHI11 + DILM150-XHI31 DILM0 + DILM150-XHI11 SDES3/U(...) 13 I 5/8 Contactor combinations 13 Contactor combin 90 DILM50 + DILM150-XHI11Star-delta DILM50 combinations + DILM150-XHI31 DILM0 + DILM150-XHI11 Q12SDES/U(...) Star-delta combi Q DILM65 + DILM150-XHI11 DILM65 + DILM150-XHI31 DILM0 + DILM150-XHI11 Moeller SK GB-AUS SDES55/U(...) Moeller SK GB-AUS Rated Max. rating for Max. Part no. Price ($) Spare Q12 auxiliary Individual components of the combination SDES5.5 SDES30 operational three-phase changeover Product contacts 0 5 DILM80 + DILM150-XHI11 DILM80 + DILM150-XHI31 current motors, time DILM50 + DILM150-XHI11 (-)Ngroup 0 SDES5/U(...) Hz 0 AC-3 AC-3 Q13 Q15 Mains contactor Delta contactor Star contactor S11 tage and frequency when ordering. Q15 Q13 Enclosed units - Complete with pushbutton & overload, According to IEC V 380 V Specify voltage V 15 V I oltages: V AC: 2 V, 110 V, V, 15 V at 50 Hz SK1158AUS_05_ fm Seite 8 Donnerstag, 2. Oktober 08 3:38 15 Ie P Part no. & frequency Part no. when Part no. rd voltages: V AC: V at 50 or 60 Hz SK1158AUS_05_ fm Seite 8 Donnerstag, 2. Oktober 08 3: DILM-10 + DILA-XHI DILM-01 + DILA-XHI A kw sdilm-01 + DILA-XHI SDES5.5/I(...) K1 K V DC: V ordering /8 Star-delta starter Contactor combinations combinations Q13 Q15 Contactor comb age add suffix -G to part no. onal charge applies /8 DILM9-10 Contactor + combinations Open units ) SDES5.5/U(...)1) DILM-10 DILA-XHI Star-delta DILM9-01 combinations + DILA-XHI DILM-01 + DILA-XHI SDES.5/I(...) Standard DILM-01voltages: DILM-01 V Contactor AC: Q15 Q13 combinations 5/9 Timing relay K1T: ETR-51 + DILA-XHI + DILA-XHI + DILA-XHI Star-delta com Star-delta combinations Complete with overload 2 V, 110 V, V, 15 V Star-delta combinations 16.5 SDES.5/U(...) 1) K1 Q13 Q DILM9-10 DILM9-01 DILM-01 + DILA-XHI uire for non-standard configurations. 11 DILM DILA-XHI DILM DILA-XHI DILM-01 + DILA-XHI Moeller SK GB-AUS SDES11/I(...) Moeller SK GB-AUS at 50 + Hz DILA-XHI + DILA-XHI ( )N N Y 11 SDES11/U(...) 1) DILM12-10 DILM12-01 DILM-01 Moeller SK GB-AUS Moeller SK GB-AUS Rated Max. rating for Max. Part no. Price ($) Spare auxiliary + DILA-XHI Individual Non-standard components + DILA-XHI of the combination voltages: + DILA-XHI SDES3 SDES5.5 SDES5 SDES30 operational three-phase changeover Product contacts DILM DILA-XHI Rated Max. DILM1-01 rating for Max. Part + DILA-XHI no. current motors, Price ($) DILM1-01 timespare auxiliary + DILA-XHI group Individual 0 components SDES15/I(...) of the combination V SDES5.5 AC: SDES V at 50 operational three-phase changeover Product Hz contacts 0 0 current motors, time group 0 AC-3 AC-3 Q13 Q15 Mains contactor or Delta contactor Star contactor S Hz 0 60 Hz, V DC: S SDES15/U(...) 1) DILM1-10 DILM DILA-XHI DILM DILA-XHI 380 V 380 V DILM DILA-XHI SDES/I(...) Q15 Q13 AC-3 AC-3 Q13 Q15 Mains contactor Delta contactor Star contactor S11 DILM1-01 DILM DILA-XHI V For + 15 V 15 V I Q15 Q13 DC DILA-XHI voltage + DILA-XHI add V 380 V I Ie P SDES/U(...) 1) DILM V 15 V Part no. suffix I DILM25-01 Part no. Part -G to part DILM1-01 no. + DILA-XHI + DILA-XHI + DILA-XHI DILM DILA-XHI DILM DILA-XHI A kw DILM25-01 s + DILA-XHI SDES30/I(...) Q1 1 1 K1 K1 1 Ie P Part no. Part no. Part no K1 18K SDES30/U(...) 1) , DILM32-10 DILM32-01 DILM A Star-delta kwstarter combinations s N.B. additional charge 1 Q13 Q15 + DILA-XHI + K1 K1 3DILA-XHI DILA-XHI Q13 Q15 Open units ) SDES5.5/U(...)1) DILM-10 DILM-01 DILM-01 Q15 Q Star-delta DILM0 starter combinations Q13 Q15 + DILM150-XHI11 Timing relay DILM0 K1T: ETR-51 + DILM150-XHI DILM0 SDES3/U(...) + DILM150-XHI11 1,3.60 SDES3/I(...) DILM0 applies. DILM0 Please enquire Q15 Q13 DILM0 + DILA-XHI + DILA-XHI + DILA-XHI GST not included Open units 12 Complete 5.51) with overload SDES5.5/U(...)1) DILM-10 DILM-01 DILM-01 + DILM150-XHI11 + DILM150-XHI31 + Q15 DILM150-XHI11 Q SDES.5/U(...) 1) for non-standard K1 Q13 Q15 Timing relay K1T: ETR DILA-XHI + DILA-XHI + DILA-XHIDILM9-10 DILM9-01 DILM-01 K1 Q13 Q15 Complete with overload 90 SDES/U(...) 1) 1,558. DILM50 + DILA-XHI DILM50 + DILA-XHI DILM0 + DILA-XHI 90 DILM50 + DILM150-XHI DILM50 + DILM150-XHI31 SDES.5/U(...) 1) 23.50DILM0 + DILM150-XHI11 DILM9-10 ( )N SDES/I(...) DILM9-01 DILM-01 + DILM150-XHI11 configurations. + K1 Q13 Q15 DILM150-XHI31 + DILM150-XHI11 ( )N N Y 11 SDES11/U(...) 1) DILA-XHI + DILA-XHI + DILA-XHIDILM12-10 DILM12-01 DILM-01 N Y SDES55/U(...) 1) 1, DILM65 ( )N + DILA-XHI NDILM65 + DILA-XHI DILM0 + DILA-XHI Y 11 SDES11/U(...) 1) DILM12-10 DILM12-01 DILM-01 + DILM150-XHI11 SDES3 SDES DILM65 + DILM150-XHI11 DILM65 + DILM150-XHI31 DILM0 + DILM150-XHI11 + DILM150-XHI31 + DILM150-XHI11 + DILA-XHISDES55/I(...) + + DILA-XHI L1 L2 L3 0 5 SDES5/U(...) 1) 3,12.10 DILM80 SDES3 SDES5 DILM80 DILM50 + DILM150-XHI11 + DILM150-XHI31 + DILM150-XHI11 0 F1 S11 30 SDES15/U(...) 1) DILM DILM1-01 DILM DILM80 + DILM150-XHI11 Enclosed units DILM80 + DILM150-XHI DILM50 SDES5.5/I(...) 1) + DILM150-XHI SDES5/I(...) DILM-10 DILM-01 DILM-01 + S B 1 x I Complete with pushbutton and overload SDES15/U(...) 1) + DILA-XHI + DILA-XHI + DILA-XHI n According to IEC DILM1-10 DILM1-01 DILM1-01 I SDES/U(...) 1) 16.5 SDES.5/I(...) 1) DILA-XHI + DILA-XHI + DILA-XHI DILM9-10 DILM DILM DILM25-01 DILM-01 DILM SDES/U(...) 1) + DILA-XHI I + DILA-XHI + DILA-XHI DILM25-10 DILM25-01 DILM K1 K1 Overload relay settings Starting Timing relay 55 set to 30 approx. 10 s. SDES30/U(...) 1) Q , DILA-XHI + DILA-XHI + DILA-XHIDILM32-10 DILM32-01 DILM SDES11/I(...) 1) 1,06.30 DILM12-10 DILM12-01 DILM Q K1 + K1 Q13 6 Q SDES30/U(...) 1) + DILA-XHI + 3DILA-XHI DILA-XHI 18 1, DILM32-10 DILM32-01 DILM A: I N x s Protection of the motor in Y- and d configuration Main circuit: 0 Depending 3 on the coordination SDES3/U(...) 1) Q15 Q SDES15/I(...) 1) type 1,.30 1,3.60 required + DILA-XHI + DILA-XHI + DILA-XHI DILM1-10 DILM0 DILM1-01 Q13 DILM0 Q15 DILM1-01 DILM0 A C + DILM150-XHI11 + DILM150-XHI31 + DILM150-XHI B: I N x s Only partial motor protection in star position (i.e. Type SDES3/U(...) 1) + DILA-XHI + DILA-XHI + Q15 DILA-XHI Q13 1 or Type 2 ) 1,3.60 it must be established whether DILM0 the fuse DILM0 protection DILM x I n 0.58 x I n K1 Q13 Q15 90 SDES/I(...) SDES/U(...) 1) 1) 1,3.60 1, DILM150-XHI11 + DILM150-XHI31 + DILM150-XHI11 DILM25-10 DILM50 DILM25-01 DILM50 DILM1-01 DILM0 and the input wiring for the mains contactor and delta contactor are to be + DILA-XHI + DILM150-XHI11 + DILA-XHI + DILM150-XHI31 K1 + Q13 DILA-XHI + DILM150-XHI11 Q15 90 SDES/U(...) 1) 1,558. DILM50 DILM50 DILM0 ( )N M1 U1 C: I N x 0.58 > 0 s Motor not protected in star position. N Y SDES30/I(...) SDES55/U(...) 1) 1) 1, , DILM150-XHI11 + DILM150-XHI31 + DILM150-XHI11 DILM32-10 DILM65 ( )N DILM32-01 DILM65 DILM25-01 DILM0 3~ common or separate. M W2 V1 U2 W1 V2 + DILA-XHI + DILM150-XHI11 N+ DILA-XHI + DILM150-XHI31 + DILA-XHI + DILM150-XHI11 Y SDES55/U(...) 1) 1, DILM65 DILM65 DILM0 L1 L2 L3 00 SDES3/I(...) 1) SDES5/U(...) 1) 1, , DILM150-XHI11 + DILM150-XHI31 + DILM150-XHI11 DILM0 DILM80 DILM0 DILM80 DILM0 DILM50 Overload relay settings Starting + DILM150-XHI DILM150-XHI31 + L1 L2 L3 + DILM150-XHI11 + A: F1 0 5 SDES5/U(...) 1) IN x 0.58 F 15 s 3,12.10 DILM80 DILM80 DILM50 Protection of the motor in Y- and d configuration Enclosed units SDES/I(...) 1) SDES5.5/I(...) 1) 2, DILM150-XHI11 + DILM150-XHI31 + DILM150-XHI11 DILM50 F1 DILM-10 DILM50 DILM-01 DILM0 DILM-01 B 1 x I Complete with pushbutton and overload + DILM150-XHI11 + DILA-XHI + DILM150-XHI31 + DILA-XHI + DILM150-XHI11 B: IN x 1 + DILA-XHI n 15 0 s Enclosed units 12 According 5.5 to IEC 609 SDES5.5/I(...) 1) DILM-10 DILM-01 DILM-01 Only partial motor protection in star position Complete with pushbutton and overload Power Distribution.5 SDES55/I(...) product 1) SDES.5/I(...) 1) guide 2, DILA-XHI eatoncorp.com.au + DILA-XHI + DILA-XHI DILM65 DILM9-10 December DILM65B 1 x DILM DILM0 I n DILM-01 C: 261 IN x 0.58 > 0 s According to IEC DILM150-XHI11 + DILA-XHI + DILM150-XHI31 + DILA-XHI + DILM150-XHI11 + DILA-XHI Motor not protected in star position 16.5 SDES.5/I(...) 1) DILM9-10 DILM9-01 DILM Q SDES5/I(...) 1) SDES11/I(...) 1) 3, , DILA-XHI + DILA-XHI + DILA-XHI DILM80 DILM12-10 DILM80 DILM12-01 DILM50 DILM-01 Timing relay set to approx. Q1510 s DILM150-XHI11 + DILA-XHI + DILM150-XHI DILA-XHI + DILM150-XHI DILA-XHI 5 Q SDES11/I(...) 1) Main circuit: 1,06.30 DILM12-10 DILM12-01 DILM-01 Q SDES15/I(...) 1) 1,.30 + DILA-XHI + DILA-XHI + DILA-XHIDILM1-10 DILM1-01 DILM1-01 Depending Aon the coordination Ctype required (i.e. Type 1 or Type 2 ) i + DILA-XHI + DILA-XHI + DILA-XHI whether 0.58 the x Ifuse protection n 0.58 and x Ithe input wiring for the mains contactor a SDES15/I(...) 1) 1,.30 DILM1-10 DILM1-01 DILM1-01 A C n be common or separate. Contactors Contactors Contactors Contactors 5/11 Contactors Contactors Contactors

Contactor 1000V Mining contactors Eaton V1 vacuum contactor Eaton s V1 Vacuum Contactors are known for quality & proven

These contactors are most commonly used for mining applications.

contamination of the contacts Derating is not required at higher voltages Mounting in any position Vacuum contactors

Vacuum Contactor Amp Ratings are AC3. Vacuum switch tubes cannot be replaced.

1NO/1NC delay 160A only J-1CV Accessories V1KTCJZ1 Description For mechanically interlocking two 160A Vacuum Contactors

barriers for 160A Vacuum contactor. Contains a set of two interphase barriers.

For line AND load side interphase barriers, order two sets.

Vac, 50/60 Hz H ID891G0 0/80 Vac, 50/60 Hz U 9085A5G03 110/1 Vac, 50/60 Hz J 8A09G01 Size 5 0/ Vac, 50/60 Hz K 8A09G0

49 Contactor 1000V Mining contactors Eaton V1 vacuum contactor Eaton s V1 Vacuum Contactors are known for quality & proven performance. They are ideally suited for heavy-duty applications in harsh environments. These contactors are most commonly used for mining applications. Rated for up to 1500V Small physical size Long life Reduced maintenance No noise, no arc flash No atmospheric contamination of the contacts Derating is not required at higher voltages Mounting in any position Vacuum contactors Description 160A V1KRCJZ1 3A V1KTCJZ1 50A V1KVCJZ1 610A V1KZCJZ1 110V AC Coil as standard. Vacuum Contactor Amp Ratings are AC3. Vacuum switch tubes cannot be replaced. V1KRCJZ1 Auxiliary contacts for V1 vacuum contactors & DPCK air break contactors Description 1NO/1NC J-11 2NO J- 2NC J-02 1NO/1NC delay 160A only J-1CV Accessories V1KTCJZ1 Description For mechanically interlocking two 160A Vacuum Contactors For mechanically interlocking two 3A Vacuum Contactors For mechanically interlocking two 50A Vacuum Contactors Interphase barriers for 160A Vacuum contactor. Contains a set of two interphase barriers. 180C113G0 180C113G16 180C113G1 IPB1 A set is suitable for line OR load side of the contactor. For line AND load side interphase barriers, order two sets. Replacement parts V1KVCJZ1 Description Suffix 110/1 Vac, 50/60 Hz J 9085A5G01 Size 0/ Vac, 50/60 Hz K 9085A5G02 380/15 Vac, 50/60 Hz H ID891G0 0/80 Vac, 50/60 Hz U 9085A5G03 110/1 Vac, 50/60 Hz J 8A09G01 Size 5 0/ Vac, 50/60 Hz K 8A09G0 380/15 Vac, 50/60 Hz H 8A09G10 0/80 Vac, 50/60 Hz U 8A09G05 110/1 Vac, 50/60 Hz J 8G01 Size 6 0/ Vac, 50/60 Hz K 8G02 380/15 Vac, 50/60 Hz H 8G0 0/80 Vac, 50/60 Hz U 8G Vdc can be directly applied to the Size 5 and 6 coil rated for 1 Vac/60 Hz (cannot be applied to Size ). 250 Vdc can be directly applied to the Size 5 and 6 coil rated for Vac/60 Hz (cannot be applied to Size ). 262 Power Distribution product guide eatoncorp.com.au December 1

Mini contactors, relays, contactors

Contents 5/1 Moeller HPL011-007/008 Mini contactors, relays, contactors Continual operational availability requires a high operational reliability from the devices used. DILM contactors not only have the