Harnessflex Specialty Conduit Systems. A Global Leader in Innovative...

Transcription

1 Global Leader in Innovative... Wire & able Management able Protection Systems Power onnection & ontrol Safety Technology Harnessflex Specialty onduit Systems

2 gricultural Vehicles Harnessflex Specialty onduit Systems Protecting ritical Wiring ssemblies for the utomotive Industry. Harnessflex flexible conduit systems and connector interfaces protect critical electrical and electronic wiring assemblies for chassis and engine manufacturers in bus, truck, agricultural vehicle and heavy machinery markets. With literally thousands of combinations, the Harnessflex system provides a complete solution for routing and protection of electrical wiring against damage by mechanical abrasion, liquid ingress and corrosive salts. The use of connector interfaces ensures that there are no vulnerable connectors exposed to the elements, impact of foreign bodies and jet washing, which could so easily cause malfunction and failure, compromising the operation of a vehicle. t T&, we re committed to: Products which provide solutions to your electrical needs onvenience of single-order, single-shipment to your site for thousands of stocking items xpert local point of contact for clear, consistent information regarding training, codes and standards Quality brands that have proven themselves over time Inventive design and manufacture of problem-solving products Offering a best-of-class warranty and returns policy Uniform carton labeling with additional bar-coding for convenient inventory management Nationwide network of stocking electrical distributors Outstanding customer service capability Supplying you with the right products, convenient packaging, on-time delivery and competitive pricing onstruction Vehicles uses Trucks We deliver the solutions that make your job easier and offer the power to bring it all together in one package. all us today and let us help you profit from sourcing your electrical products from the leader, Thomas & etts. Tankers and Trailers

3 ustomer Service Immediate, Knowledgeable ssistance very Thomas & etts ustomer Service Representative is right where the action is surrounded by all the support and information they need to answer your questions and fill your orders faster than ever. Your calls and faxes are automatically routed to ustomer Service Specialists who personally serve your account and can answer questions about products, order status, price and availability, and other service-related inquiries. Phone: Fax: mail: Harnessflex Specialty onduit Systems Technical Service Overview onduits Hinged onnectors Interfaces Sealed Fittings Technical Information atalog Number Index T& ccess tnbaccess.tnb.com T& ccess is a global sales tool for our distributor partners, offering: Quote Requests Stock hecks Pricing Inquiries ross Reference Order ntry Order Resolution Shipping Status ocument Look-Up utomatic Order Receiving Item History Search Multiple-Location User Search ontext- Sensitive Help Shipping onfirmations Tracking ata xpediting Returns Processing Quality Issues ustomer Report ards Web atalog Look-Up ll of these tools and more are available online 24 hours a day 7 days a week, without having to make a single phone call. Multi-lingual options are available in nglish, French and Spanish. T& ccess now serves over 10,000 satisfied customer users at over 3,500 locations every month.

4 T& Services Over 170 Years of Industry xperience Meeting and exceeding our customers expectations is a fundamental goal of Thomas & etts. all our epartment and talk LIV to an expert who ll answer questions and concerns regarding all aspects of our products and services. Our experienced and knowledgeable staff is second to none in the industry! Tool Services TOOL Quality You an Trust Trust T& s dedicated Tool Services epartment to answer all questions regarding tool applications, repair, warranties, sales/lease/rental and technical information. sk about our specialized services, including customer/sales training, demos and calibration/ certification of tools. Web atalog /webcatalog Thousands of Products at Your Fingertips U.S. contractors and specifiers have made our web catalog their number one stop. Users can search for technical information by catalog number, UP code, competitor number, keyword search, product category and/or brand. Having found the item(s) they are searching for, they can then use our Where To uy function to locate a T& local distributor and/or other support services. 2

5 T& Services Web Library /Library Over 4,000 2 and 3 Models vailable FR! The T& Library is an on-line source of 2 and 3 models, available FR to customers who register. Users can download these files to their desktops for import into their working drawings. rawings are offered in 90 of the most popular native file formats. This is a valuable tool for designers, OMs and engineering firms, as it will allow them to quickly locate and download T& drawings into their projects. Over 4,000 drawings of T& Fittings, PM able Protection, Kindorf and Superstrut products and Steel ity and arlon Floor oxes are currently available, and we re continually adding more products to the library. IM Library Now available to you through utodesk Seek (seek.autodesk.com), our IM (uilding Information Modeling) objects can easily be imported to your Revit models. These IM objects are fully standards compliant, Revit ertified and completely configurable. utodesk and Revit are registered trademarks of utodesk, Inc. 3

6 onduit & Fittings Harnessflex Specialty onduit Systems Overview bout Harnessflex OM esign ulture Harnessflex is a leading designer and manufacturer of flexible conduit systems and connector interfaces, protecting critical electrical and electronic wiring assemblies in the automotive industry, principally focused on chassis and engine manufacturers within bus, truck, agricultural vehicle and heavy machinery markets. Manufacturers who have to meet stringent emission regulations and improved machine reliability requirements are replacing traditional cable protection methods with our conduit systems. With literally thousands of combinations, the Harnessflex system offers the complete solution for routing and protection of electrical wiring against damage by mechanical abrasion, liquid ingress and corrosive salts. The use of connector interfaces ensures that there are no vulnerable connectors exposed to the elements, impact of foreign bodies and jet washing, which could so easily cause malfunction and failure, compromising the operation of a vehicle. Our success has come from our systematic commitment to providing an extensive range of high-grade quality components. ombining a full range of slit and un-slit conduit, fittings and connectors, we also offer the largest range of hinged system components and connector interfaces within the industry. Selection Table for onduit N (POLYMI 6) TP (POLYMI 6) HN (POLYMI 11) P (FR O-POLYSTR) ONUITS PP (POLYPROPYLN) SPP (FR POLYPROPYLN) PK (POLYTHRTHRKTON) HT* (POLYPHNYLN SULPHI) TLOG PG(S) STTI TMP. ( ) MIN MX UV RSISTN FLXIILITY * FTIGU LIF * HLOGN FR SLF XTINGUISHING XTRNL WR RSISTN SLIT VRSION VILL 3 3 Slit only HMIL RSISTN Global Market IRM 903 (STM OIL NO. 2) S S S S S S S S ISL OIL S S S S S S S S THYLN GLYOL (NTIFRZ) S S S S S S S S LURITING OIL S S S S S S S S MTHYL LOHOL L L S S S S S S PRFIN OIL S S S S S S S S PTROL S S S S S S S S SOIUM HLORI S S S S S S S S SOIUM HYROXI (10%) S S S S S S S S TRNSFORMR OIL S S S S S S S S UR S S S NT NT NT S S VGTL OIL S S S S S S S S S (WTR) S S S S S S S S Key: S = Suitable, L = Limited Suitability, U = Unsustainable, NT = Not Tested. ll chemicals tested for resistance at 33. Maximum Performance = * HT is a pliable conduit system for static applications. Manufacturers of vehicle harnesses operate on a truly global scale. Harnessflex products can be found on vehicles and engines throughout the world in frica, merica, ustralia, urope, the Middle ast and the Far ast, and we have been working with our global customers for many years. pplications The Harnessflex system is suitable for use on vehicles in a wide variety of markets and geographical locations. We provide harness solutions for: gricultural vehicles onstruction vehicles ngine manufacturers Harness manufacturers Truck and bus manufacturers Tanker and trailer manufacturers Specialist vehicle components Military vehicles 4

7 Overview Ingress Protection (IP) Ratings Harnessflex hinged systems are rated at IP40. Harnessflex sealed systems are rated at IP66, IP67, IP68 (2bar for 30 mins.) and IP69k only when using Harnessflex conduit. Product Specifications ll Harnessflex fittings are manufactured from polyamide 66 (P 66) and are black in color. Other colors and materials can be made available to achieve specific customer requirements. Product data sheets and dimension charts are available for the full Harnessflex range contact Thomas & etts Technical Support. esign ata Harnessflex products are developed using the following systems: PT Pro-NGINR Wildfire 2 and 3 utodesk Inventor V10, V11 and 2008 utodesk uto 2006, 2007and 2008 rawing files are available in the following formats (as well as the versatile PF format): WG, XF, WF, IGS, STP, STL, PRT, SM, IPT, IM. Pre-Production Samples From data, we are able to produce accurate representations of final manufactured products, using a 3 printing process. Prototype fittings are typically produced in duraform P, a material that gives similar performance in tests to P 66. Prototype extrusions can be manufactured in a variety of materials contact Thomas & etts Technical Support for details. Our pre-production process allows a design to be validated before a product is tooled for manufacture. PT, Pro/NGINR and Wildfire are registered trademarks of Parametric Technology orporation. utodesk Inventor and uto are registered trademarks of utodesk, Inc. 5onduit & Fittings Harnessflex Specialty onduit Systems

8 onduit & Fittings Harnessflex Specialty onduit Systems onduits N and N Slit Standard Weight Polyamide 6 General-Purpose onduit Flexible standard weight nylon (P6) conduit is a general-purpose conduit suitable for automotive harness applications. It can withstand extremes of temperatures and resists automotive oils and solvents. It is extremely tough and has a high-impact strength and fatigue life. Solid N conduits provide protection against mechanical shock and ingress of water while maintaining their form through tight bend radii. pplications N standard weight is extensively used in harnesses on HGV, off-road vehicles and marine applications where a superior protection against impact and mechanical shock is preferred. The conduit is used for both chassis and engine applications and can be used in a wide range of temperatures. Polyamide 6 is highly resistant to all hydrocarbon-based oils and fluids and many types of solvents. N is designed for connection to all Harnessflex sealed and hinged system fittings. N conduits are available in a range of popular sizes. The standard color is black with other colors, including orange for hybrid vehicles, available on request. N onduit ONUIT SIZ NOMINL O/ MIN. OR MIN. STTI N R. RL LNGTH T. NO. (N) (NW) (M) N N N N N N N N N N N For orange conduit, add /OR. For red conduit, add /R. xample: N20/OR/50m. Hints & Tips KWIKUT is the ideal cutting tool for all non-metallic conduits up to 32mm. utting Instructions Place the conduit between the cutting blade and lower support, squeeze the handles and rotate the conduit for a clean, easy cut. Spare blades are available. atalog Numbers KWIKUT KWIKUT-lade N Slit onduit ONUIT SIZ NOMINL O/ MIN. OR MIN. STTI N R. RL LNGTH T. NO. (N) (NW) (M) N06-S N08-S N10-S N12-S N16-S N20-S N25-S N28-S N32-S N40-S N50-S For orange conduit, add /OR. For red conduit, add /R. xample: N20-S/R/50m. 6

9 onduits TP and TP Slit Lightweight Polyamide 6 General-Purpose onduit Flexible lightweight nylon (P6) conduit is a general-purpose conduit suitable for automotive harness applications. It can withstand extremes of temperatures and resists automotive oils and solvents. It is extremely tough and has a high-impact strength and fatigue life. TP conduits provide protection against mechanical shock and ingress of water while maintaining their form through tight bend radii. pplications Lightweight convoluted tube used for interior harnesses, offering limited mechanical protection, abrasion resistance and enhanced aesthetics of the harness. xtremely light and flexible. Resistant to oils and solvents. TP onduit ONUIT SIZ NOMINL O/ MIN. OR MIN. STTI N R. RL LNGTH Hints & Tips KWIKUT is the ideal cutting tool for all non-metallic conduits up to 32mm. utting Instructions Place the conduit between the cutting blade and lower support, squeeze the handles and rotate the conduit for a clean, easy cut. Spare blades are available. atalog Numbers KWIKUT KWIKUT-lade T. NO. (N) (NW) (M) TP TP TP TP TP TP TP TP TP TP For orange conduit, add /OR. For red conduit, add /R. xample: PT10/OR/100m. TP Slit onduit ONUIT SIZ NOMINL O/ MIN. OR MIN. STTI N R. RL LNGTH T. NO. (N) (NW) (M) TP08-S TP10-S TP12-S TP16-S TP20-S TP25-S TP28-S TP32-S TP40-S TP50-S For orange conduit, add /OR. For red conduit, add /R. xample: TP08-S/R/100m. 7onduit & Fittings Harnessflex Specialty onduit Systems

10 onduit & Fittings Harnessflex Specialty onduit Systems onduits HN Standard Weight Polyamide 11, Low-Temperature xtra-flexible onduit HN standard weight conduit is made from polyamide 11 and is specially formulated to meet the environmental and mechanical requirements for the exterior of working vehicles. HN conduit also provides protection against mechanical shock and ingress of water while maintaining its form through tight bend radii. It is specifically designed to cope with extremes of temperature combined with repeated movement and vibration. pplications HN conduit is used in applications requiring repeated flexing coupled with low-temperature impact toughness. Robotics and rapid- or continuous-motion applications demanding high fatigue life and extra flexibility are covered by HN, which is also used in low-temperature environments. HN standard weight conduit is designed for connection to all Harnessflex hinged and sealed fittings. P Medium Weight (FR o-polyester) Flame-Retardant onduit ONUIT SIZ NOMINL O/ MIN. OR MIN. STTI N R. RL LNGTH T. NO. (N) (NW) (M) HN HN HN HN HN HN HN HN HN P standard weight conduit is made from flame-retardant co-polyester, which is a halogen free, low smoke and very low toxicity material. It has excellent high- and low-temperature properties. P conduits provide protection against mechanical shock and ingress of water while maintaining their form through tight bend radii. This material demonstrates excellent chemical resistance to greases, hydrocarbons, fuels and oils. pplications P is used in applications requiring low fire hazard performance. It is lightweight and retains its flexibility at extremes of temperature. P is designed for use in the interior and exterior of vehicles and marine passenger cabins. P is designed for connection to all Harnessflex hinged and sealed fittings. Hints & Tips KWIKUT is the ideal cutting tool for all non-metallic conduits up to 32mm. utting Instructions Place the conduit between the cutting blade and lower support, squeeze the handles and rotate the conduit for a clean, easy cut. Spare blades are available. atalog Numbers KWIKUT KWIKUT-lade ONUIT SIZ NOMINL O/ MIN. OR MIN. STTI N R. RL LNGTH T. NO. (N) (NW) (M) P P P P P P P P P

11 onduits Modified PP Medium Weight Polypropylene onduit PP is a flexible conduit made from polypropylene. PP conduits provide very good acid resistance, very good flexibility and a very high fatigue life. pplications PP is used in lighter applications where compression strength and LFH are not so important. The main strength of this conduit is its acid resistance. PP is halogen free and not self-extinguishing. PP conduits are available in a range of popular sizes, in black only. PP is designed for connection to all Harnessflex sealed and hinged system fittings. ONUIT SIZ NOMINL O/ MIN. OR MIN. STTI N R. RL LNGTH T. NO. (N) (NW) (M) PP PP PP PP PP PP PP eep Section Modified Slit PP Medium Weight Polypropylene onduit SPP conduit is made from a halogen-free, flame-retardant material. SPP slit conduits provide protection against mechanical shock while maintaining their form through tight bend radii. pplications SPP has a deep section to maintain the conduit shape during bending. onduits are supplied in slit form to facilitate rapid cable installation and are designed for connection to all Harnessflex hinged fittings. ONUIT SIZ NOMINL O/ MIN. OR MIN. STTI N R. RL LNGTH T. NO. (N) (NW) (M) SPP SPP SPP SPP SPP SPP SPP SPP onduit & Fittings Harnessflex Specialty onduit Systems

12 onduit & Fittings Harnessflex Specialty onduit Systems onduits PK Standard Weight Polyketone Super-Low Fire Hazard onduit Super-Low Fire Hazard PK is a standard weight conduit, which offers superior mechanical strength as well as high radiation and chemical protection in extreme temperatures. It is a unique product manufactured from a special polymer, for use in the most demanding applications. Peek is a truly high performance conduit. pplications This flexible conduit, with its high specification performance, is used in some of the most demanding applications. It is often found in aerospace, off-shore, military, heat treatment, nuclear, petrochemical and marine applications. HT High-Temperature onduit ONUIT SIZ NOMINL O/ MIN. OR MIN. STTI N R. RL LNGTH T. NO. (N) (NW) (M) PK PK PK PK PK pliable conduit suitable for static applications where elevated temperatures are present. It features high compression strength and excellent chemical resistance and is made from specially modified PPS. pplications This conduit has been developed for use in engine areas where elevated temperatures occur. Suitable for long-term exposure to 200. NW ontact Thomas & etts Technical Support for full details and availability. ONUIT SIZ NOMINL O/ MIN. OR MIN. STTI N R. RL LNGTH T. NO. (N) (NW) (M) HT HT HT HT HT HT HT HT

13 Hinged onnectors Hinged Interfaces Hinged fittings allow for protection of cables at breakouts, harness servicability and for the conduit system to self level. They are designed to protect against high-pressure washing, excessive cable strain and mechanical abrasion. Variety, flexibility and assembly speed are inherent in all Harnessflex fittings. Quality and Standards Manufacturing is controlled in accordance with S N ISO 9001, while ongoing testing and approval to international standards (UL, TUV, LI) provides additional confidence required to specify appropriate Harnessflex products across the widest variety of automotive applications including hazardous or aggressive environments. onduit has the following approvals: FMVSS 302 NFR Ford flammability specification for conduit French automotive conduit specification UL Recognized merican electrical conduit specification ll components comply with nd of Life Vehicle (LV) directive U2000/53/. Harnessflex hinged fittings also comply with ISO14001 nvironmental Standards. apabilities Our internal design team is able to offer unique solutions specific to our customers applications. Using the latest 3 modeling software, we are able to communicate new product designs quickly and efficiently. Prototype parts can be quickly made to order to enable product evaluation early on in the design cycle. If you have a need for a dedicated hinged fitting, contact Thomas & etts Technical Support to discuss your requirement. onduit & Fittings Harnessflex Specialty onduit Systems esign Features 1. Radiused internal form of conduit protects cables from abrasion. 2. Internal backstop (found on all hinged fittings) alleviates any potential problems caused by unevenly cut conduit. Hints and Tips 1. Multiple breakouts can be achieved from any N20, N25 or N28 exit using our ST splitter range. See page 31 for details. 2. JPS and PS fittings can be used as conduit enlargers or reducers. 3. ombining multiple XPS fittings (page 15) creates a self-leveling manifold, ideal for engine bay or transmission applications. 11

14 Hinged onnectors onduit & Fittings Harnessflex Specialty onduit Systems xternal Hinged Joiners One-piece joiner and elbow hinged fittings allow a variety of conduit size variations. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. an be used as a reducer as well as an enlarger. xternal Hinged lbows F (N) ONUIT SIZS (NW) IMNSIONS () T. NO. F JPS JPS JPS JPS JPS JPS JPS JPS JPS JPS JPS JPS One-piece joiner and elbow hinged fittings allow a variety of conduit size variations. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. an be used as a reducer as well as an enlarger. F ONUIT SIZS (N) (NW) IMNSIONS () G T. NO. F G PS08S PS12S PS PS PS PS PS PS PS PS PS PS PS PS PS PS PS N/ N/ N/ N/ N/ N/ 12

15 Hinged onnectors xternal Hinged T-Pieces One-piece symmetrical three-junction fittings allow a variety of conduit size variations. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. ONUIT SIZS ONUIT SIZS (N) (NW) NOMINL IMNSIONS () (N) (NW) T. NO. F G H I T. NO. F G H I TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS , TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS H G I F NOMINL IMNSIONS () onduit & Fittings Harnessflex Specialty onduit Systems 13

16 onduit & Fittings Harnessflex Specialty onduit Systems Hinged onnectors xternal Hinged Y-Pieces One-piece asymmetrical three-junction fittings allow a variety of conduit variations. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. F H G 30 ONUIT SIZS NOMINL IMNSIONS ONUIT SIZS NOMINL IMNSIONS (N) (NW) () (N) (NW) () T. NO. F G H T. NO. F G H YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS

17 Hinged onnectors xternal Hinged Protective Shrouds One-piece cover providing protection for in-line connectors, fuse links, circuit breakers and splicing areas. The PS shrouds can be used as a harness datum, due to the integrated cable tie/fir tree facility. The strong construction allows for the protection of delicate connections, or as an alternative when an interface/backshell isn t available. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. F X-Pieces Internal Two-piece symmetrical four-junction fittings enable a variety of conduit size combinations. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. In addition, several fittings can be snapped together to provide multiple outlets without the need of short conduit joints. G Ø ONUIT SIZS INTRNL IMTR (N) (NW) IMNSIONS () T. NO. () F G PS PS PS PS PS onduit & Fittings Harnessflex Specialty onduit Systems I H G J F K ONUIT SIZS ONUIT NGGMNT OVRLL (N) (NW) () IMNSIONS T. NO. F G H I J K XPS

18 onduit & Fittings Harnessflex Specialty onduit Systems I Hinged onnectors ustom Hinged Manifolds One-piece hinged fittings designed to suit specific project or application requirements. For lanking aps, see page 31. Z T. NO. G H Type 1 M O J TYP I P L K F R 30 G H Type 2 ONUIT SIZ (N) ONUIT NGGMNT () OVRLL IMNSIONS () F G H I J K L M N O P R MPS MPS MPS MPS Split Manifolds M I J K WIGHT (G) Two identical half shells snap together to create a five-way conduit manifold. This fitting works with different types of slit and unslit conduit, including N, PT, modified PP and deep section PP. dditional configurations are possible (dependent on volume). ontact Thomas & etts Technical Support for details. H G F K ONUIT SIZ (N) OVRLL IMNSIONS () M I J T. NO. F G H I J K L M MPS MPS MPS MPS MPS MPS L 16

19 Hinged onnectors In-Line Hinged ircular Manifolds One-piece straight fittings providing in-line customized combinations of multiple conduit breakouts. ST breakout disk configurations can be made to order. For more details, contact Thomas & etts Technical Support. For P Interface, see page Ø53.5 In-Line Hinged ircular Manifolds Standard ONUIT NOMINL IMNSIONS () T. NO. I20-31 N20 NW I25-31 N25 NW I32-31 N32 NW onduit & Fittings Harnessflex Specialty onduit Systems In-Line Hinged ircular Manifolds reakout Type T. NO ST N08 N08 N08 LNK N08 N08 ST N12 N12 N08 LNK LNK N12 ST N08 N08 N08 N08 N08 N08 17

20 onduit & Fittings Harnessflex Specialty onduit Systems Interfaces Interfaces Vehicle electrical system faults are often traced to problems at the cable entry points of electrical connectors. Harnessflex connector interfaces are designed to protect against high-pressure washdown, excessive cable strain and mechanical abrasion. Variety, flexibility and assembly speed are inherent in all Harnessflex fittings. Quality and Standards Manufacturing is controlled in accordance with S N ISO 9001, while ongoing testing and approval to international standards (UL Recognition, TUV, LI) provides additional confidence required to specify appropriate Harnessflex products across the widest variety of automotive applications including hazardous or aggressive environments. onduit has the following approvals: FMVSS 302 NFR UL Recognized Ford flammability specification for conduit French automotive conduit specification merican electrical conduit specification ll components comply with nd of Life Vehicle (LV) directive U2000/53/. Harnessflex interfaces also comply with ISO14001 nvironmental Standard. apabilities Harnessflex works closely with many blue chip companies to develop protection for electrical connectors (a critical area of an engine harness). Our experienced internal design team uses 3 modeling software to produce various concepts for customer approval. Once a design is selected, a prototype of the interface can be quickly supplied to enable a pre-production harness assembly. These prototype parts can be used for validation purposes, due to the close approximation of properties of the material used in the prototyping process and polyamide 66 used in our injection-molded components (see page 48 for material specification). With Harnessflex s history of connector interface design and our understanding of customers requirements, we are well placed to produce custom solutions that integrate any electrical connector into a harness design. Hints and Tips 1. Interfaces can be used in areas where electrical connectors are vulnerable to high-pressure washing. 2. Our interfaces offer strain relief to crimped contacts. 3. When our 90 swivel elbows are used with interfaces, they allow the harness to self level. 4. Using our part number I-MF-90 with a standard 90 swivel fitting, a 180 swivel bend is possible. 18

21 Interfaces xternal Hinged onnector Interfaces MP Superseal These single-junction straight and 90 elbow fittings provide high-integrity connections between MP Superseal connectors and Harnessflex conduit systems. The fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. In addition, 90 elbow versions allow the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. onduit Ø xternal Straight onnector Interface onduit Ø xternal 90 lbow onnector Interface onduit & Fittings Harnessflex Specialty onduit Systems onfigurations T. NO. STRIGHT INTRF T. NO. 90 LOW SWIVL INTRF ONUIT SIZ (N) (NW) ONNTOR TYP I08-S1 I08-90-S MP Superseal 1-Way I08-S2 I08-90-S MP Superseal 2-Way I08-S3 I08-90-S MP Superseal 3-Way I08-S4 I08-90-S MP Superseal 4-Way I10-S2 I10-90-S MP Superseal 2-Way I10-S3 I10-90-S MP Superseal 3-Way I10-S4 I10-90-S MP Superseal 4-Way I12-S1 I12-90-S MP Superseal 1-Way I12-S2 I12-90-S MP Superseal 2-Way I12-S3 I12-90-S MP Superseal 3-Way I12-S4 I12-90-S MP Superseal 4-Way MP Superseal is a registered trademark of the Whitaker orporation. Nominal imensions T. NO. STRIGHT INTRF T. NO. 90 LOW SWIVL INTRF I08-S I08-90-S I08-S I08-90-S I08-S I08-90-S I08-S I08-90-S I10-S I10-90-S I10-S I10-90-S I10-S I10-90-S I12-S I12-90-S I12-S I12-90-S I12-S I12-90-S I12-S I12-90-S

22 onduit & Fittings Harnessflex Specialty onduit Systems Interfaces xternal Hinged onnector Interfaces MP Junior and Mini Timer These single-junction straight and 90 elbow fittings provide high-integrity connections between MP Junior Timer or Mini Timer and Harnessflex conduit systems. The fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. In addition, 90 elbow versions allow the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. onduit Ø xternal Straight onnector Interface onfigurations T. NO. STRIGHT INTRF T. NO. 90 LOW SWIVL INTRF onduit Ø ONUIT SIZ (N) (NW) xternal 90 lbow onnector Interface ONNTOR TYP MP Junior Timer Interfaces I08-M2 I08-90-M MP Junior Timer 2-Way I08-M3 I08-90-M MP Junior Timer 3-Way I08-M4 I08-90-M MP Junior Timer 4-Way I10-M2 I10-90-M MP Junior Timer 2-Way I10-M3 I10-90-M MP Junior Timer 3-Way I10-M4 I10-90-M MP Junior Timer 4-Way I12-M2 I12-90-M MP Junior Timer 2-Way I12-M3 I12-90-M MP Junior Timer 3-Way I12-M4 I12-90-M MP Junior Timer 4-Way MP Mini Timer Interfaces I12-X01 I12-90-X MP Mini Timer 1-Way Nominal imensions T. NO. STRIGHT INTRF T. NO. IMNSIONS () 90 LOW IMNSIONS () SWIVL INTRF MP Junior Timer Interfaces I08-M I08-90-M I08-M I08-90-M I08-M I08-90-M I10-M I10-90-M I10-M I10-90-M I10-M I10-90-M I12-M I12-90-M I12-M I12-90-M I12-M I12-90-M MP Mini Timer Interfaces I12-X I12-90-XO

23 Interfaces xternal Hinged onnector Interfaces MPSL 16 This range of straight and 90 elbow fittings offers a compact and highintegrity connection between MPSL automotive connectors and Harnessflex conduit systems. These interfaces provide complete cable protection right up to the connector. They also provide strain relief and protection from high-pressure washing, helping to maintain the sealing integrity of the connector. The 90 elbow allows the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. For connector catalog number reference table, see page 50. NW Swivel elbows for N16 (NW13) are now available for all connector interfaces. ontact Thomas & etts Technical Support for full details. onduit & Fittings Harnessflex Specialty onduit Systems onduit Insertion onduit Insertion ONUIT SIZ IMNSIONS () T. NO. ONNTOR MPSL 16 Straight Interfaces I08-T2PL 2-Way N I08-T3PL 3-Way N I08-T4PL 4-Way N I12-T4PL 4-Way N I12-T6PL 6-Way N I12-T8PL 8-Way N I12-T12PL 12-Way N I16-T8PL 8-Way N I16-T12PL 12-Way N I20-T20PL 20-Way N MPSL lbow Interfaces I08-90-T2PL 2-Way N I08-90-T3PL 3-Way N I08-90-T4PL 4-Way N I12-90-T2PL 2-Way N I12-90-T3PL 3-Way N I12-90-T4PL 4-Way N mpseal 16 is a registered trademark of the Whitaker orporation. ONUIT SIZ IMNSIONS () T. NO. (N) (NW) I08-90-T2LP I08-90-T2LR I08-90-T3LP I08-90-T3LR I08-90-T4LP I08-90-T4LR I08-90-T6LP I08-90-T6LR I12-90-T2LP I12-90-T2LR I12-90-T3LP I12-90-T3LR I12-90-T4LP I12-90-T4LR I12-90-T6LP I12-90-T6LR LP = Plug LR = Receptacle I08-TY I08-90TY

24 onduit & Fittings Harnessflex Specialty onduit Systems Interfaces xternal Hinged onnector Interfaces eutsch T Series Our single-junction straight and 90 elbow fittings provide high-integrity connections between eutsch T connectors and Harnessflex conduit systems. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. In addition, 90 elbow versions allow the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. The functionality of a connector when attached to a Harnessflex product depends on the application, installation and operational criteria determined by the user. For connector part number reference table, see page 50. NW Swivel elbows for N16 (NW13) are now available for all connector interfaces. ontact Thomas & etts Technical Support for full details. onfigurations T. NO. STRIGHT INTRF T. NO. 90 LOW SWIVL INTRF Straight onnector ONUIT SIZ (N) (NW) ONNTOR TYP I08-T2 I08-90-T Way I08-T3 I08-90-T Way I08-T4 I08-90-T Way I08-T6 I08-90-T Way I12-T2 I12-90-T Way I12-T3 I12-90-T Way I12-T4 I12-90-T Way I12-T6 I12-90-T Way I12-T8 I12-90-T Way I12-90-T Way I16-90-T Way I16-T12 I16-90-T Way eutsch is a registered trademark of eutsch Group. Nominal imensions T. NO. STRIGHT INTRF 90 onnector T. NO. IMNSIONS () 90 LOW IMNSIONS () SWIVL INTRF I08-T I08-90-T I08-T I08-90-T I08-T I08-90-T I08-T I08-90-T I12-T I12-90-T I12-T I12-90-T I12-T I12-90-T I12-T I12-90-T I12-T I12-90-T I12-90-T I16-90-T I16-T I16-90-T

25 Interfaces xternal Hinged onnector Interfaces eutsch TP04 Series Our compact 90 elbow fittings provide a dual orientation high-integrity connection between the eutsch TP04 and Harnessflex conduit systems. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. The TP04 adapter will snap into the outlet of a 16mm hinged fitting, including types Y (YPS), T (TPS), elbows (PS) and joiners (JPS). For connector catalog number reference table, see page 50. F ONUIT SIZ NOMINL IMNSIONS () T. NO. (N) (NW) F I12-90-TP TP onduit & Fittings Harnessflex Specialty onduit Systems xternal Hinged onnector Interfaces eutsch R50 Series Two identical half shells snap together onto the twin outlets of the eutsch R50 interface, creating a three-way conduit fitting. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. F G (N) ONUIT SIZS (NW) NOMINL IMNSIONS () I T. NO. F G H I I R I R I R I R I R I R H eutsch is a registered trademark of eutsch Group. 23

26 Interfaces onduit & Fittings Harnessflex Specialty onduit Systems FI utomotive pex Hinged Interfaces Single-junction, straight and 90 elbow fittings provide high-integrity connections between FI pex connectors or Junior Timer connectors and Harnessflex conduit systems. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. In addition, 90 elbow versions allow the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. For connector part number reference table, see page 50. FI utomotive pex Straight Interfaces T. NO. ONNTOR (N) (NW) I08-FI02 2-Way I08-FI03 3-Way I08-FI04 4-Way I12-FI02 2-Way I12-FI03 3-Way I12-FI04 4-Way I12-FI14 14-Way I16-FI14 14-Way FI14 14-Way n/a n/a n/a I17-FI10 10-Way 17 n/a I25-FI50 50-Way pex is a registered trademark of FI. ONUIT SIZ NOMINL IMNSIONS () FI utomotive pex 90 lbow Swivel Interfaces ONUIT SIZ NOMINL IMNSIONS () T. NO. ONNTOR (N) (NW) I08-90-FI02 2-Way I08-90-FI03 3-Way I08-90-FI04 4-Way I12-90-FI02 2-Way I12-90-FI03 3-Way I12-90-FI04 4-Way I08-90-FI14 14-Way I12-90-FI14 14-Way I16-90-FI14 14-Way I08-90-FS02 2-Way SIM

27 Interfaces xternal Hinged onnector Interfaces osch ompact Single-junction, straight and 90 elbow fittings provide high-integrity connections between various osch compact connectors and Harnessflex conduit systems. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. In addition, 90 elbow versions allow the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. For connector part number reference table, see page 50. NW Swivel elbows for N16 (NW13) are now available for all connector interfaces. ontact Thomas & etts Technical Support for full details. onduit & Fittings Harnessflex Specialty onduit Systems onduit Ø onduit Ø xternal Straight onnector Interface xternal 90 lbow onnector Interface onfigurations T. NO. STRIGHT INTRF T. NO. 90 LOW SWIVL INTRF ONUIT SIZ (N) (NW) I08-2 I Way I08-3 I Way I08-4 I Way I12-2 I Way I12-3 I Way I12-4 I Way I Way osch is a registered trademark of Robert osch GmbH. ONNTOR TYP Nominal imensions T. NO. STRIGHT INTRF T. NO. IMNSIONS () 90 LOW IMNSIONS () SWIVL INTRF I I I I I I I I I I I I I

28 Interfaces onduit & Fittings Harnessflex Specialty onduit Systems xternal Hinged onnector Interfaces elphi Series Single-junction, straight and 90 elbow fittings provide high-integrity connections between various elphi series connectors and Harnessflex conduit systems. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. In addition, 90 elbow versions allow the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. For connector part number reference table, see page 50. NW Swivel elbows for N16 (NW13) are now available for all connector interfaces.ontact Thomas & etts Technical Support for full details. onduit Ø onduit Ø xternal Straight onnector Interface xternal 90 lbow onnector Interface onduit Insertion onduit Insertion onduit Insertion F GT153 onnector Interface GT284 onnector Interface 26

29 Interfaces xternal Hinged onnector Interfaces elphi Series (continued) onfigurations T. NO. STRIGHT INTRF T. NO. 90 LOW SWIVL INTRF ONUIT SIZ (N) (NW) ONNTOR TYP I I Way I08-MP2 I08-90-MP Way I08-MP3 I08-90-MP Way 108-P P Way I12-90-MP Way I12-90-MP Way I12-90-P Way I08-WP2 I08-90-WP Way I12-90-WP Way I08-PT2 I08-90-PT Way I12-90-PT Way I08-GT153 I08-90-GT I12-90-GT GT284 I12-90-GT GT284 I16-90-GT Nominal imensions T. NO. STRIGHT INTRF T. NO. IMNSIONS () 90 LOW IMNSIONS () SWIVL INTRF I I I08-MP I08-90-MP I08-MP I08-90-MP I08-P I08-90-P I12-90-MP I12-90-MP I12-90-P2 I08-WP I08-90-WP I12-90-WP I08-GT I08-90-GT I12-90-GT I08-PT I08-90-PT I12-90-PT GT I12-90-GT GT I16-90-GT onduit & Fittings Harnessflex Specialty onduit Systems atalog Numbering System Reference RF. elphi Metri-Pack MP To suit Metripack ONNTOR SYSTM P elphi Metri-Pack To suit Metripack WP elphi Weatherpack To suit Weatherpack PT Power Timer GT elphi Metri-Pack Series 150 and

30 onduit & Fittings Harnessflex Specialty onduit Systems Interfaces Kostal Hinged Interfaces lip-on elbow interface for Kostal in-line connector. onduit Insertion Kostal 90 lbow Swivel Interfaces N/NW I08-90-K2 T. NO. 90 LOW ONUIT SIZ () IMNSIONS () SWIVL INTRF (N) (NW) I08-90-K I08-90-K I12-90-K I12-90-K Kostal is a registered trademark of Leopold Kostal GmbH & o. KG. Kostal Straight Interface T. NO. ONUIT SIZ () IMNSIONS () STRIGHT INTRF (N) (NW) I16-LK PG Thread LK20 T. NO. THR TYP THR LNGTH /F I.. PG21-LK20 PG I16-LK20 Millflex Hinged S Interfaces lip-on straight interface for Millflex S connectors. ONUIT SIZ () IMNSIONS () T. NO. (N) (NW) I08-MF I10-MF I12-MF

31 Interfaces IN Hinged Interface ircular interface to fit IN style connectors. onnector is free to swivel after interface is installed. onduit Insertion N/NW Ø IP67 lanking Plug Plastic IP67 blanking plug to seal female IN circular connectors. Prevents the ingress of water/dust during transport or harness storage. Ø ONUIT SIZ IMNSIONS () T. NO. (N) (NW) I I IMNSIONS () T. NO. P onduit & Fittings Harnessflex Specialty onduit Systems Interfaces for ircular onnectors Fitting provides connection between electrical circular connectors and hinged conduit system. ue to the innovative design, the interface can freely rotate without any harness movement. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. lbow Straight Y Y Piece T T Piece Hinged Fitting Interface Fitting Size Size ore Ø Ø Ø onfigurations INTRF OY SHLL SIZ FITTING SIZ (N) (NW) THR SIZ NP "-20 UNF NP "-20 UNF NP "-18 UNF I20-U100 18/ "-20 UNF I20-U119 18/ "-18 UNF I28-U "-18 UNF I28-U "-18 UNF Nominal imensions INTRF FITTING SIZ IMNSIONS () OY SHLL SIZ (N) (NW) NP NP NP I20-U100 18/ I20-U119 18/ I28-U I28-U

32 onduit & Fittings Harnessflex Specialty onduit Systems Interfaces Sumitomo 4-Way Interface Single-junction, straight and 90 elbow fittings provide high-integrity connections between Sumitomo connectors and Harnessflex conduit systems. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. In addition, 90 elbow versions allow the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. onduit Insertion N/NW Sumitomo is a registered trademark of Sumitomo lectric Industries, Ltd. N/NW onduit Insertion ONUIT SIZ IMNSIONS () T. NO. (N) (NW) I08-SU I08-90-SU Note: 180 versions are available. Kostal Inhibitor lip-on inhibitor for 2-way Kostal interface, to provide easy and correct harness installation. Kostal is a registered trademark of Leopold Kostal GmbH & o. KG. ONUIT SIZ IMNSIONS () T. NO. (N) (NW) K2I-LH N/ N/

33 Interfaces Multi-Way Reducers One-piece, multi-way breakout inserts provide reducing options to a variety of conduit sizes from a single hinged fitting junction. These reducers can accommodate all types of slit and unslit conduit and may be used with all Harnessflex hinged fittings. Hinged Fitting Multi-Way Reducer FROM ONUIT SIZ TO ONUIT SIZS (N) TO ONUIT SIZS (NW) T. NO. (N) (NW) ST20-2X ST STN25-3X ST ST ST28-4X Multiple Reduced Size onduits onduit & Fittings Harnessflex Specialty onduit Systems lanking aps ONUIT SIZ T. NO. (N) (NW) PST

34 Interfaces onduit & Fittings Harnessflex Specialty onduit Systems MP P Hinged Interfaces lip-on straight interfaces for MP P 31 pole circular connectors. MP TYO Hinged Interfaces lip-on straight interfaces for MP TYO 62 connectors. ONUIT SIZ () IMNSIONS () T. NO. (N) (NW) I I I I ONUIT SIZ () IMNSIONS () T. NO. (N) (NW) 28-TY

35 Sealed Fittings Sealed Fittings wide range of sealed fittings rated at IP66, IP67, IP68 (2bar 30 mins.) and 69k are available and complete the product offering for vehicle wiring applications. Quality and Standards Manufacturing is controlled in accordance with S N ISO 9001, while ongoing testing and approval to international standards (UL Recognition, TUV, LI) provides additional confidence required to specify appropriate Harnessflex products across the widest variety of automotive applications including hazardous or aggressive environments. onduit has the following approvals: FMVSS 302 Flammability specification for conduit NFR French automotive conduit specification UL Recognized merican electrical conduit specification Sealed fittings have the following approvals when used with N solid conduit: NFR UL Recognized ll components comply with nd of Life Vehicle (LV) directive U2000/53/. Harnessflex Sealed Fittings also comply with ISO14001 nvironmental Standard. onduit & Fittings Harnessflex Specialty onduit Systems apabilities Our internal design team offers unique solutions specific to our customers applications. Using the latest 3 modeling software, we are able to communicate new product designs quickly and efficiently. Prototype parts can be quickly made to order to enable product evaluation early on in the design cycle. If you have a need for a dedicated sealed fitting, contact Thomas & etts Technical Support to discuss your requirements. Hints and Tips 1. The anti-vibration spring clips can be released easily if access is needed no tool required. 2. In order to maintain the IP rating of the sealed fittings, face sealing washers must be used with all threaded fittings. 3. y using an S swivel clamping ring (page 44), an IP40 rotating joint can be achieved. 4. Our sealed T and X pieces and our sealed manifolds have inspection covers, which can be removed during installation to aid cable routing. 33

36 Sealed Fittings onduit & Fittings Harnessflex Specialty onduit Systems Straight Fittings Our straight compression-type fittings incorporate fixed or swivel male threads to provide connection to knockouts and threaded entries. These fittings are designed for use with all types of slit and unslit conduit, thus maintaining maximum conduit bore. See page 42 for details on reducing options that enable each straight fitting to accommodate a variety of conduit sizes. Order fitting bodies, cap nuts and sealing bushing separately. Straight Fitting onfigurations Straight Fitting ap Nut Sealing ush Fitting ody Flat Sealing Washer G F Straight Swivel Fitting G Ø N/NW Ø OR F /F 34

37 Sealed Fittings Straight Fittings T. NO. FITTING OY P NUT SLING USHING ONUIT SIZS IMNSIONS () MIN. OR THR /F SIZ (NW) (N) THR SIZ F G Metric Versions 12-M16 N07 SRN M16x M16x M20 N07 SRN M20x M20x M16 N09 SRN M16x M16x M20 N09 SRN M20x M20x M16 N11 SRN M16x M16x M20 N11 SRN M20x M20x M20 N16 SRN M20x M20x M25 N21 SRN M25x M25x M25 N28 SRN M25x M25x M32 N32 SRN M32x M32x M40 N36 SRN M40x M40x M50 N48 SRN M50x M50x Note: Order fitting bodies, cap nuts and sealing bushings separately. Note: imensions are in mm and refer to an overall assembly. PG Versions 12-PG09 N07 SRN PG PG PG11 N07 SRN PG PG PG13 N07 SRN PG PG PG09 N09 SRN PG PG PG11 N09 SRN PG PG PG13 N09 SRN PG PG PG09 N11 SRN PG PG PG11 N11 SRN PG PG PG13 N11 SRN PG PG PG16 N16 SRN PG PG PG21 N21 SRN PG PG PG21 N28 SRN PG PG PG29 N32 SRN PG PG PG36 N36 SRN PG PG PG48 N48 SRN PG PG Note: Order fitting bodies, cap nuts and sealing bushings separately. Note: imensions are in mm and refer to an overall assembly. Part numbers for NPT and PF threads available on request. Swivel Metric Versions S12-M16 N07 SRN M16x M16x S12-M20 N07 SRN M20x M20x S12-M16 N09 SRN M16x M16x S12-M20 N09 SRN M20x M20x S16-M16 N11 SRN M16x M16x S16-M20 N11 SRN M20x M20x S20-M20 N16 SRN M20x M20x S25-M25 N21 SRN M25x M25x S25-M25 N28 SRN M25x M25x S32-M32 N32 SRN M32x M32x Note: Order fitting bodies, cap nuts and sealing bushings separately. Note: imensions are in mm and refer to an overall assembly. Other thread options available, including PF, PG, NPT and UNF contact Thomas & etts Technical Support for further information. onduit & Fittings Harnessflex Specialty onduit Systems 35

38 Sealed Fittings onduit & Fittings Harnessflex Specialty onduit Systems 90 lbows Our 90 compression-type fittings incorporate fixed or swivel male threads to provide connection to knockouts and threaded entries. These fittings are designed for use with all types of slit and unslit conduit, thus maintaining maximum conduit bore. See page 42 for details on reducing options that enable each straight fitting to accommodate a variety of conduit sizes. Order elbow bodies, cap nuts and sealing bushes separately. 90 lbow onfigurations ap Nut Sealing ush Fitting ody 90 Fitting imensions H G Face Sealing Washer F 90 Swivel Fitting imensions Ø N/NW G H F /F 36

39 Sealed Fittings 90 lbows T. NO. LOW OY P NUT SLING USHING F SLING WSHR ONUIT SIZS THR IMNSIONS () MIN. OR THR (NW) (N) SIZ F G H Metric Versions 12-M16-90 N07 SRN07 SWM M16x M16x M16-90 N09 SRN09 SWM M16x M16x M20-90 N09 SRN09 SWM M20x M20x M16-90 N11 SRN11 SWM M16x M16x M20-90 N11 SRN11 SWM M20x M20x M20-90 N16 SRN16 SWM M20x M20x M25-90 N21 SRN21 SWM M25x M25x M25-90 N28 SRN28 SWM M25x M25x M32-90 N32 SRN29 SWM M32x M32x M40-90 N36 SRN36 SWM M40x M40x M50-90 N48 SRN48 SWM M50x M50x Note: Order fitting bodies, cap nuts and sealing bushings separately. PG Versions Note: imensions are in mm and refer to an overall assembly. 12-PG09-90 N07 SRN07 SWPG PG PG PG09-90 N09 SRN09 SWPG PG PG PG11-90 N11 SRN11 SWPG PG PG PG13-90 N11 SRN13 SWPG PG PG PG16-90 N16 SRN16 SWPG PG PG PG21-90 N21 SRN21 SWPG PG PG PG21-90 N28 SRN21 SWPG PG PG PG29-90 N32 SRN29 SWPG PG PG PG36-90 N36 SRN36 SWPG PG PG PG48-90 N48 SRN48 SWPG PG PG Note: Order fitting bodies, cap nuts and sealing bushings separately. Note: imensions are in mm and refer to an overall assembly. Swivel Metric Versions S12-M16-90 N07 SRN07 SWM M16x M16x S16-M16-90 N11 SRN11 SWM M16x M16x S20-M20-90 N16 SRN16 SWM M20x M20x S25-M25-90 N21 SRN21 SWM M25x M25x S32-M32-90 N32 SRN29 SWM M32x M32x S40-M40-90 N36 SRN36 SWM M40x M40x S50-M50-90 N48 SRN48 SWM M50x M50x Note: Order fitting bodies, cap nuts and sealing bushings separately. Note: imensions are in mm and refer to an overall assembly. Other thread options available, including PF, PG, NPT and UNF contact Thomas & etts Technical Support for further information. onduit & Fittings Harnessflex Specialty onduit Systems 37

40 onduit & Fittings Harnessflex Specialty onduit Systems T-Piece ody Sealed Fittings 90 Flanges 90 elbow compression type-fittings provide a four-hole panel mounting facility. These fittings are designed for use with all types of slit and unslit conduit, thus maintaining maximum conduit bore. See page 42 for details on reducing options that enable each straight fitting to accommodate a variety of conduit sizes. Note: For extending the capability of sealed fittings, contact Technical Support regarding clamping rings, end sleeves/end caps, grommet seals, locknuts, face sealing washers and thread reducers/enlargers. Flange ody Sealing ush ap Nut T-Pieces I H Ø6 G F Symmetrical, three-junction compression-type fittings provide a variety of conduit size configurations. These fittings are designed for use with all types of slit and unslit conduit, thus maintaining maximum conduit bore. See page 42 for details on reducing options that enable each straight fitting to accommodate a variety of conduit sizes. ccessories For extending the capability of sealed fittings, contact Technical Support regarding clamping rings, end sleeves/end caps, grommet seals, locknuts, face sealing washers and thread reducers/enlargers. Order T-piece bodies, cap nuts and sealing bushings separately. ap Nut Sealing ushing F G H Ø6 J T. NO. ONUIT SIZ FLNG OY P NUT SL USHING (N) (NW) 32-F90 N32 SRN F90 N36 SRN F90 N48 SRN Nominal imensions (mm) T. NO. FLNG OY MIN. OR F G H I J 32-F F F Note: imensions refer to an overall assembly. T. NO. T. NO. T-PI T-PI (WITH RKT) (NO RKT) P NUT SL USHING ONUIT SIZ (N) (NW) TP12 N07 SRN TP12 N09 SRN TP16 N11 SRN TP20 TP20 N16 SRN TP28 TP28 N21 SRN TP28 TP28 N28 SRN TP32 TP32 N32 SRN Note: Order T-piece bodies, cap nuts and sealing bushes separately. Nominal imensions (mm) T. NO. T. NO. T-PI T-PI (WITH RKT) (NO RKT) MIN. OR F G TP TP TP20 TP TP28 TP TP32 TP Note: imensions refer to an overall assembly. 38

41 Sealed Fittings X-Piece Symmetrical four-junction compression-type fitting provide a variety of conduit size configurations. These fittings are designed for use with all types of unslit conduit, thus maintaining maximum conduit bore. See page 42 for details on reducing options that enable each straight fitting to accommodate a variety of conduit sizes. ccessories For extending the capability of sealed fittings, contact Technical Support regarding clamping rings, end sleeves/end caps, grommet seals, locknuts, face sealing washers and thread reducers/enlargers. Order X-piece bodies, cap nuts and sealing bushings separately. ap Nuts X-Piece ody Seal ushing F G H T. NO. X-PI P NUT SL USHING ONUIT SIZ (N) (NW) XP20 N16 SRN Note: Order T-piece bodies, cap nuts and sealing bushes separately. Nominal imensions (mm) T. NO. X-PI G H XP Note: imensions refer to an overall assembly. onduit & Fittings Harnessflex Specialty onduit Systems Manifolds symmetrical four-junction compression fittings designed for use with all types of unslit conduit, thus maintaining maximum conduit bore. ccessories For extending the capability of sealed fittings, contact Technical Support regarding clamping rings, end sleeves/end caps, grommet seals, locknuts, face sealing washers and thread reducers/enlargers. Order manifold bodies, cap nuts and sealing bushings separately. ap Nut Manifold ody Sealing ush H F Ø6 G ONUIT SIZ T. NO. P NUT SL USHING (N) (NW) MNIFOL OY TPM2512 N21 N07 SRN21 SRN TPM2512 N21 N21 SRN21 SRN TPM2512 N28 N28 SRN28 SRN TPM2512 N28 N28 SRN28 SRN Note: Order T-piece bodies, cap nuts and sealing bushes separately. Nominal imensions (mm) T. NO. MNIFOL OY F G H TPM Note: imensions refer to an overall assembly. 39

42 Sealed Fittings ircular UNF onnector Interfaces onduit & Fittings Harnessflex Specialty onduit Systems Straight compression-type fittings provide connection between military style circular connections and conduit systems. These fittings are designed for use with all types of unslit conduit, thus maintaining maximum conduit bore. See page 42 for details on reducing options that enable each straight fitting to accommodate a variety of conduit sizes. ccessories For extending the capability of sealed fittings, contact Technical Support regarding clamping rings, end sleeves/end caps, grommet seals, locknuts, face sealing washers and thread reducers/enlargers. Order interface bodies, cap nuts and sealing bushes separately. Specials available upon request. Please contact Thomas & etts Technical Support for further details. Nominal imensions (mm) ONUIT SIZ T. NO. SL F SLING INTRF OY P NUT USHING WSHR (N) (NW) THR SIZ MP01 N07 SRN07 SWPG "-24 UNF MP01 N09 SRN09 SWPG "-24 UNF MP02 N09 SRN09 SWM "-24 UNF MP03 N16 SRN16 SWM "-20 UNF MP04 N16 SRN16 SWPG "-18 UNF MP05 N21 SRN21 SWM "-18 UNF MP05 N28 SRN28 SWM "-18 UNF MP06 N07 SRN07 SWM "-20 UNF MP07 N09 SRN09 SWPG "-18 UNF MP08 N07 SRN07 SWPG "-20 UNF MP08 N09 SRN09 SWPG "-20 UNF Note: Order T-piece bodies, cap nuts and sealing bushes separately. T. NO. INTRF OY THR SIZ MP "-24 UNF 17 MP "-20 UNF 20 MP "-18 UNF 20 MP "-18 UNF 21 MP "-20 UNF 17 MP "-24 UNF 17 MP "-20 UNF 20 Note: imensions refer to an overall assembly. 40

43 Sealed Fittings Solenoid onnector Interfaces Use screw-thread straight and elbow connectable interfaces for circular solenoids, sensors and switches. These fittings are designed for use with all types of unslit conduit, thus maintaining maximum conduit bore. See page 42 for details on reducing options that enable each straight fitting to accommodate a variety of conduit sizes. ccessories For extending the capability of sealed fittings, contact Technical Support regarding clamping rings, end sleeves/end caps, grommet seals, locknuts, face sealing washers and thread reducers/enlargers. Seal apnut Thread Thread Ø Ø Switch Housing Socket onduit & Fittings Harnessflex Specialty onduit Systems T. NO. THR NOMINL IMNSIONS () LOW FITTING NUT OLOR S-M24-90 M24x lack S-M27-90 M27x Gray T. NO. THR NOMINL IMNSIONS () STRIGHT FITTING NUT OLOR S-M24-S M24x lack S-M27-S M27x Gray T. NO. SUITL FOR ONNTOR TYP NUMR OF PINS IMNSIONS () RSG02 M RSG03 M RSG04 M RSG05 M RSG06 M I/ RSGP01 Socket T. NO. RSGP01 RSGP01- SRIPTION Single hain Form 41

44 Sealed Fittings onduit & Fittings Harnessflex Specialty onduit Systems ap Nuts and Reducing ushings To N/NW To N/NW able Glands From N/NW From N/NW T. NO. P NUT T. NO. RUING SLING USHING FROM ONUIT SIZ TO ONUIT SIZ (N) (NW) (N) (NW) N09-08 RS N11-08 RS N11-12 RS N16-08 RS N16-12 RS N16-16 RS N21-12 RS N21-16 RS N21-20 RS N21-12 RS N21-16 RS N21-20 RS N32-20 RS N32-25 RS N32-28 RS Straight compression-type IP68 5bar cable glands incorporate fixed male threads to provide secure cable connections through knockouts and threaded entries. ccessories For extending the capability of Harnessflex cable glands, see page 43 for locknuts, face sealing washers and blanking plugs for unused entries. F Metric Versions T. NO. THR L O RNG /F SIZ F GS-M16 M16x GS-M20 M20x GS-M25 M25x GS-M32 M32x GS-M40 M40x GS-M50 M50x GS-M63 M63x PG Versions T. NO. THR L O RNG /F SIZ F GS-PG07 PG GS-PG09 PG GS-PG11 PG GS-PG13 PG GS-PG16 PG GS-PG21 PG GS-PG29 PG GS-PG36 PG Notes: imensions are in mm. O = outside diameter. 42

45 Sealed Fittings Locknuts and Face Sealing Washers Non-metallic locknuts, face sealing washers and blanking plugs designed for use with Harnessflex cable glands, enclosures and sealed fittings to connect to knockouts and threaded entries. Locknut Face Sealing Washer T. NO. THR SIZ (/F) Locknuts LNP-M16 M16x LNP-M20 M20x LNP-M25 M25x LNP-M32 M32x LNP-M40 M40x LNP-M50 M50x LNP-PG07 PG LNP-PG09 PG LNP-PG11 PG LNP-PG13 PG LNP-PG16 PG LNP-PG21 PG LNP-PG29 PG LNP-PG36 PG LNP-PG48 PG Face Sealing Washers SWM16 M SWM20 M SWM25 M SWM32 M SWM40 M SWM50 M SWPG07 PG SWPG09 PG SWPG11 PG SWPG13 PG SWPG16 PG SWPG21 PG SWPG29 PG SWPG36 PG SWPG48 PG onduit & Fittings Harnessflex Specialty onduit Systems 43

46 Sealed Fittings onduit & Fittings Harnessflex Specialty onduit Systems nd Sleeves nd aps Swivel Rings Replaces SRN seal to provide a rotating joint. N/NW ONUIT SIZ OUTLT I. NOMINL IMNSIONS () T. NO. (N) (NW) RNG SN SN SN SN SN SN SN ONUIT SIZ OUTLT I. NOMINL IMNSIONS () T. NO. (N) (NW) RNG K K ONUIT SIZ OUTLT I. NOMINL IMNSIONS () T. NO. (N) (NW) RNG S S S S S S nd aps Push-in one-piece fitting leaves a smooth exit from conduit when fittings not used. Ø ONUIT SIZ OUTLT I. NOMINL IMNSIONS () T. NO. (N) (NW) RNG S S S S S S S Smooth ntry Grommet One-piece slit insert provides abrasion protection for cables passing through a hinged fitting junction where conduit is not used. N/NW Ø ø ONUIT SIZ OUTLT I. NOMINL IMNSIONS () T. NO. (N) (NW) RNG SG SG

47 Sealed Fittings onduit lips One-piece non-metallic conduit clips provide secure mounting points for conduit systems within a Harnessflex system. These fittings are designed to snap together over all types of slit and unslit conduit, thus maintaining maximum conduit bore. P-lips F One-piece, metallic P-clips provide secure mounting points for conduit systems within a harness installation. These clips are designed to accommodate all Harnessflex slit and unslit conduits. T. NO/ LIP ONUIT SIZ (N) (NW) FIXING HOL SIZ /F OUNTR- OR SIZ F H H H H H H H H onduit & Fittings Harnessflex Specialty onduit Systems Metallic P-clip T. NO. P-LIP ONUIT SIZ (N) (NW) FIXING HOL SIZ PS PS PS PS PS PS PS PS Modular onduit lips One-piece, non-metallic conduit clips provide secure mounting points for conduit systems within a harness installation. The base unit provides a strong and secure location, while rotating conduit clip prevents detatchment through vibration. These clips are designed to snap together and securely locate Harnessflex slit and unslit conduits. Order base unit and conduit clip separately. ø øf F onduit lip lip ase Unit Unit T. NO. ONUIT LIP S UNIT IMNSIONS () F OLOR MS22-08 M22 N08 NW lack MS22-12 M22 N12 NW Gray 45

48 Technical Information onduit & Fittings Harnessflex Specialty onduit Systems Storage Recommendation for Polyamide Products Polyamide is widely and successfully used for products in the electrical and electronics industries. Thanks to its excellent mechanical and physical properties over a wide range of application temperatures and its very good weather resistance, polyamide can be used to make products for interior and external use that meet the most stringent of demands. s a hygroscopic material, polyamide has the ability to absorb moisture in molecular form into the plastic matrix. s the moisture content goes up, product properties may change slightly. bsorbed water acts as a plasticizer, reducing strengths and moduli and increasing the toughness of the polyamide. lthough at room temperature the stiffness and strength of P6 is more reduced by the moisture uptake than those of P66, this difference can be considered to be non-significant. P6 absorbs more water than P66, especially under high humidity conditions. ut the resulting dimensional change is still of a similar order. The following chart shows how the moisture content of polyamides comes into balance with the ambient air in a normal climate of 50% relative humidity and 23 : Material In air (23 /50% rh) Polyamide % by weight Polyamide % by weight To maintain balanced moisture content, Harnessflex recommends storing products under the following conditions: Storage temp. Processing temp. Rel. humidity 18 to 30 >18 >30% t lower processing temperatures and in particular when subjected to unnatural drying, corrugated pipes display increased flexural rigidity. In the very dry winter months, the moisture balance may go down slightly as the material releases moisture to the environment (owing to lower relative humidity). ompared to temperate outdoor conditions at around 0 (40 80% rh), the humidity in heated rooms may drop by half to below 20% rh if no humidification is present. ven extremely dry regions such as the Sahara esert record average humidity of 20% to 60% rh. If products from an outside environment are brought into a heated processing area, the change in climate may suddenly cause temporary de-moisturization around the edges. fter one or two days in the processing area, a natural balance will be restored. Observing this storage recommendation ensures optimum processability and material properties. quilibrium moisture content % P46 P6 P66 PP Relative humidity % 46

49 Technical Information Ingress Protection (IP) Rating according to N 60529/IN IP suitability ratings are a system for classifying the degree of protection provided by enclosures of electrical equipment. The higher the number, the greater the degree of protection; they apply ONLY to properly installed equipment. The numerals stand for the following: Protection against Solid odies egree of protection for persons against access to hazardous parts inside the enclosure and/or against the ingress of solid foreign objects. 0 No protection 1 2 The first digit stands for: Protection against ust IP 6 8 Objects greater than 50mm, accidental touch by hands Objects greater than 12mm, accidental touch by fingers Protection against Water egree of protection of equipment inside enclosures against damage from the ingress of water. 0 No protection 1 2 IP 6 8 The second digit stands for: Protection against Water Protected against vertically falling drops of water Protected against direct sprays of water up to 15 from vertical onduit & Fittings Harnessflex Specialty onduit Systems 3 Objects greater than 2.5mm, e.g. tools/wires 3 Protected against sprays of water to 60 from vertical 4 Objects greater than 1mm, e.g. tools/wires/ small wires 4 Protected against water sprayed from all directions; limited ingress permitted 5 Protected against dust; limited ingress (no harmful deposits) 5 Protected against low-pressure jets of water from all directions; limited ingress permitted 6 Totally protected against dust (dust-tight) 6 Protected against strong-pressure jets of water, heavy seas; limited ingress permitted 7 Protection against the effects of immersion between 15cm 1m 8 Protection against long periods of immersion under a quoted pressure (e.g. 2bar at 24 hours) 9k IP69k automotive standard IN40050 and signifies resistance to high-pressure jets of water (up to 80bar) from any angle 47

50 Technical Information onduit & Fittings Harnessflex Specialty onduit Systems Nylon (P6) Used on all Harnessflex N and TP nylon conduits Properties Test Method Value Unit General ensity ISO g/cm3 Melting Point ISO / Mechanical Tensile Strength ISO (on) MPa longation at reak ISO 527 >50 (on) % Youngs Modulus ISO (ry) MPa harpy Impact Strength ISO 179 N (ry) kj/m2 harpy Notched Impact Strength 11 (ry) kj/m2 IZO Impact Strength ISO 180 N (ry) kj/m2 IZO Notched Impact Strength ISO (ry) kj/m2 Thermal Heat istortion Temperature- ISO Heat istortion Temperature- ISO 75 >200 Flammability Flammability UL 94 H N/ lectrical ielectric Strength I (ry) MV/m Surface Resistivity I (ry) log10ω Volume Resistivity I (ry) log10ω omparative Tracking Index I 112 >600 V Notes: N = id not break, ry = ry as molded, on = onditioned , 50% rh ll tests undertaken at 23 where applicable. hemical Resistance: Nylon 6 Harnessflex conduits are resistant to all underbonnet oils, greases, fuels, cleaning fluids and synthetic fluids. Like all Nylons, they are resistant to weak acids but not resistant to strong or oxidizing acids. pprovals: N conduits are approved to different standards, including NFR Others are manufacturer specific or are new developments and may not be approved to certain standards. Please contact Technical Support for specific inquiries. PK (PolytheretherKetone) Used on PK conduit Properties Test Method Value Unit General ensity ISO g/cm3 Melting Point 343 Mechanical Tensile Strength ISO MPa longation at reak ISO 527 <60 % Youngs Modulus ISO MPa harpy Impact Strength, 2mm Notch ISO kj/m2 harpy Impact 0.25mm Notch ISO kj/m2 IZO Impact Strength ISO 180 N kj/m2 IZO Impact Strength 0.25mm Notch ISO kj/m2 Thermal Heat istortion Temperature- ISO Heat istortion Temperature- ISO 75 Flammability UL 94 V-O N/ lectrical ielectric Strength I kv/m-1 Surface Resistivity I 93 Volume Resistivity I Ω cm omparative Tracking Index I V Notes: N = id not break, ll tests undertaken at 23 where applicable. This linear aromatic polymer is semi-crystalline and is widely regarded as the highest performance thermoplastic material currently available. summary of key physical properties is as follows: High Temperature Performance: PK polymer and compounds typically have a glass transition temperature of 143 and a melting temperature of 343 and a continuous use temperature of 260 (UL 746). Wear Resistance: PK polymer has excellent friction and wear properties exhibiting outstanding wear resistance over wide ranges of pressure, velocity, temperature and counterfacial roughness. hemical Resistance: PK polymer has excellent resistance to a wide range of chemical environments, even at elevated temperatures. The only common environment which dissolves PK polymer is concentrated sulphuric acid. Fire, Smoke and Toxicity: PK polymer is highly stable and requires no flame-retardant additives to achieve a V-0 rating at 1.4mm thickness. The composition and inherent purity of the material results in extremely low smoke and toxic gas emission in fire situations. Hydrolysis Resistance: PK polymer and compounds are not chemically attacked by water or pressurized steam. omponents which are constructed from these materials retain a high level of mechanical properties when continuously conditioned in water at elevated temperatures and pressures. lectrical Properties: The electrical properties of PK polymer are maintained over a wide frequency and temperature. Nylon (P66) Heat Stabilized Used on all Harnessflex un-reinforced nylon fittings Properties Test Method Value Unit General ensity ISO g/cm3 Melting Point ISO Mechanical Tensile Strength ISO (ry) MPa longation at reak ISO (ry) % Youngs Modulus ISO (ry) MPa Flexural Modulus ISO (ry) MPa harpy Impact Strength ISO 179 N (ry) kj/m2 harpy Notched Impact Strength 6 (ry) kj/m2 IZO Impact Strength ISO 180 N (ry) kj/m2 IZO Notched Impact Strength ISO (ry) kj/m2 Thermal Heat istortion ISO Heat istortion 0.45MPa ISO Flammability UL 94 V-O N/ Flammability UL 94 V2 N/ Glow Wire 1.5mm I /2 850 (on) lectrical ielectric Strength I (ry) MV/m Surface Resistivity I Ω Volume Resistivity I Ω.cm omparative Tracking Index I V Notes: N = id not break, ry = ry as molded, on = onditioned , 50% RH ll tests undertaken at 23 where applicable. hemical Resistance: Nylon (P66) Harnessflex fittings are resistant to all underbonnet oils, greases, fuels, cleaning and synthetic fluids. Like all Nylons, they are resistant to weak acids but not resistant to strong or oxidizing acids. pprovals: Individual parts are approved to different standards, including NFR Others are manufacturer specific or are new developments and may not be approved to certain standards. Please contact Technical Support for specific inquiries. 48

51 Technical Information Nylon (P66) - 30% Glass Fiber Filled Used on S-M27 and S-M24 swivel nuts Properties Test Method Value Unit General ensity ISO g/cm3 Moisture bsorption (1) Ð Sim. to ISO % Mechanical (2) Tensile Stress at Yield/reak (3) ISO N/mm2 longation at reak ISO % Modulus of lasticity (4) ISO N/mm2 IZO Notched Impact -30 ISO 180/ Key: 1 Moisture absorption, saturation at +23 and 50% rh (ref. IN 53495). 2 ry as molded. 3 Test speed 5mm/min. 4 Test speed 1mm/min. 5 Glow wire applied during 30 secs, temperature 750, thickness 1.6mm. kj/m2 Thermal Heat eflection Temperature (HT) ISO 75/ 250 all Pressure Test I >200 Flammability Flammability (1.6mm thickness) UL 94 H Oxygen Index ISO % Glow Wire Test xtinguishing Time (5) I /1 <15 s Hot Wire Ignition (HWI) (1.5mm thickness) I >15 s High-urrent rc Ignition (HI) (0.7mm thickness) I >120 No. of arcs lectrical (2) ielectric Strength I >30 kv/mm Specific Surface Resistivity I Ω Specific Volume Resistivity I Ω.cm ielectric MHz I I issipation Factor x10 4 x10 4 omparative Tracking Index I V lectrolytic orrosion I Thermoplastic lastomer TPV Used on sealing products polypropylene-based elastomer designed primarily for demanding automotive applications. This material exhibits excellent compression set, flex fatigue and highand low-temperature performance. SRN SWN SG SN K Properties Test Method Value Unit General ensity ISO g/cm3 Hardness Shore (5 sec.) ISO rittleness Temperature ISO Flammability UL 94 H Stress/Strain Properties ISO 37 (II) Flow irection Tensile Strength 3.8 MPa Modulus 100% 2.7 MPa longation at reak 280 % ross irection Tensile Strength 5.1 MPa Modulus 100% 1.9 MPa longation at reak 470 % Tear Strength (ross irection) Trouser ISO 34 7 kn/m Un-nicked ngle ISO 34 (a) 22 kn/m ompression Set ISO h/23 22 % 72h/70 26 % 72h/ % Hot ir ging ISO h/125 hange in Hardness 2 pts Retention Tensile Strength 90 % Retention longation at reak 96 % 336h/150 hange in Hardness 0 pts Retention Tensile Strength 90 % Retention longation at reak 87 % onduit & Fittings Harnessflex Specialty onduit Systems Volume Swell ISO h/100 Water +3 % 168h/100 STM Oil % 168h/100 Ref. Fuel +91 % Notes: Tests are conducted on injection-molded plaques. ll tests undertaken at 23 where applicable. hemical Resistance: TPV fittings are resistant to water, acids, ethanol, glycerol, methanol and propanol, hydraulic brake fluid and antifreeze. Large volume swell (>60%) is experienced with certain oils and fuels. pprovals: Individual parts are approved to different standards, including NFR Others are manufacturer specific or are new developments and may not be approved to certain standards. Please contact Technical Support for specific inquiries. 49

52 Technical Information onduit & Fittings Harnessflex Specialty onduit Systems onnector atalog Number Reference T. NO. RF. NO. NOTS T. NO. RF. NO. NOTS T. NO. RF. NO. NOTS T. NO. RF. NO. NOTS I K2 I08-S I12-90-M I12-T6PL I I08-S I12-90-M I12-T8PL I08-90-M I08-S I12-90-S I I08-90-M I08-S I12-90-S I I08-90-M I08-T2PL I12-90-S I I08-90-S I08-T3PL I12-90-S I12-T2 T06-2S I08-90-S I08-T4PL I12-90-T2LP I12-T3 T06-3S I08-90-S I08-T6PL I12-90-T2LR I12-T4 T06-4S I08-90-S I I12-90-T2PL I12-T6 T06-6S I08-90-T2LP I I12-90-T3LP I12-T8 T06-8S I08-90-T2LR I I12-90-T3LR I12-FI02 I08-90-T2PL I I12-90-T3PL I12-FI03 I08-90-T3LP I08-T2 T06-2S I12-90-T4LP I12-FI04 I08-90-T3LR I08-T3 T06-3S I12-90-T4LR I12-FI14 I08-90-T3PL I08-T6 T06-6S I12-90-T4PL I12-MF2 I08-90-T4LP I08-F2W I12-90-T6LP I12-WP2 I08-90-T4LR I08-FI02 I12-90-T6LR I12-X01 I08-90-T4PL I08-FI03 I I16-90-T8PL I08-90-T6LP I08-FI04 I I16-90-T12 T06-12S I08-90-T6LR I08-GT153 I I16-90-T8 T06-8S I I08-GT153-Z I12-90-T12 T06-12S I16-90-FI14 I I08-MF2 I12-90-T2 T06-2S I16-T12PL I I08-P2 I12-90-T3 T06-3S I16-T8PL I I08-MP2 I12-90-T4 T06-4S I16-T12 T06-12S I08-90-T2 T06-2S I08-MP3 I12-90-T6 T06-6S I16-T8 T06-8S I08-90-T2 I08-NV001 I12-90-T8 T06-8S I16-FI14 I08-90-T3 T06-3S I08-PT2 I12-90-TP04 I16-LK20 I08-90-T4 T06-4S I08-SU4 I12-90-FI02 I17-FI10 I08-90-T6 T06-6S I08-TY I12-90-FI03 I R50 I08-90-FI02 I08-WP2 I12-90-FI04 I R50 I08-90-FI03 I08-WS2 I12-90-FI14 I20-31 I08-90-FI04 I10-90 I12-90-GT153 I20-T12PL I08-90-FI14 I10-90-M I12-90-K2 I R50 I08-90-FS02 I10-90-M I12-90-K3 I R50 I08-90-GT153 I10-90-M I12-90-P2 I25-31 I08-90-K2 I10-90-S I12-90-MP2 I25-FI50 I08-90-K3 I10-90-S I12-90-MP3 I I08-90-P2 I10-90-S I12-90-WP2 I28-40 I08-90-MP2 I10-M I12-90-X01 I28-U138 I08-90-MP3 I10-M I12-M I32-31 I08-90-NV001 I10-M I12-M I-T2 I08-90-PT2 I10-S I12-M I-FS02 I08-90-S I10-S I12-S I-K2 I08-90-SU4 I10-S I12-S I-K3 I08-90-WP2 I10-MF2 I12-S I-MF-90 I08-M I R50 I12-S IS-90 I08-M I R50 I12-T12PL I08-M I12-90-M I12-T4PL ll olor and Wire Variants ll osch Kompact Variants ll olor Variants ll olor and Key Variants 50

53 atalog Number Index T. NO. PG NO. T. NO. PG NO. T. NO. PG NO. 12-GT TP FI GT TY M M M M PG PG PG PG M M M M PG PG PG PG PG M M PG PG M M PG PG F M M PG PG F M M PG PG F M M PG PG S12-M S12-M S12-M S16-M S16-M S16-M S20-M S20-M S25-M S25-M S32-M S32-M S40-M S50-M P PST P P S S S S S S S GS-M GS-M GS-M GS-M GS-M GS-M GS-M GS-PG GS-PG GS-PG GS-PG GS-PG GS-PG GS-PG GS-PG I I08-90-M I08-90-M I08-90-M I08-90-S I08-90-S I08-90-S I08-90-S I08-90-T2LP...21 I08-90-T2LR...21 I08-90-T2PL...21 I08-90-T3LP...21 I08-90-T3LR...21 I08-90-T3PL...21 I08-90-T4LP...21 I08-90-T4LR...21 I08-90-T4PL...21 I08-90-T6LP...21 I08-90-T6LR...21 I I I I I08-90-T I08-90-T I08-90-T I08-90-T I08-90-FI I08-90-FI I08-90-FI I08-90-FI I08-90-FS I08-90-GT I08-90-K I08-90-K Index 51

54 atalog Number Index Index T. NO. PG NO. T. NO. PG NO. T. NO. PG NO. I08-90-P I08-90-MP I08-90-MP I08-90-PT I08-90-SU I08-90TY I08-90-WP I08-M I08-M I08-M I08-S I08-S I08-S I08-S I08-T2PL...21 I08-T3PL...21 I08-T4PL...21 I I I I I08-T I08-T I08-T I08-T I08-FI I08-FI I08-FI I08-GT I08-MF I08-P I08-MP I08-MP I08-PT I08-SU I08-TY I08-WP I10-90-M I10-90-M I10-90-M I10-90-S I10-90-S I10-90-S I10-M I10-M I10-M I10-S I10-S I10-S I10-MF I R I R I I12-90-M I12-90-M I12-90-M I12-90-S I12-90-S I12-90-S I12-90-S I12-90-T2LP...21 I12-90-T2LR...21 I12-90-T2PL...21 I12-90-T3LP...21 I12-90-T3LR...21 I12-90-T3PL...21 I12-90-T4LP...21 I12-90-T4LR...21 I12-90-T4PL...21 I12-90-T6LP...21 I12-90-T6LR...21 I I I I12-90-T I12-90-T I12-90-T I12-90-T I12-90-T I12-90-T I12-90-TP I12-90-FI I12-90-FI I12-90-FI I12-90-FI I12-90-GT I12-90-GT I12-90-K I12-90-K I12-90-P I12-90-P I12-90-MP I12-90-MP I12-90-PT I12-90-WP I12-90-X I12-90-XO I12-M I12-M I12-M I12-S I12-S I12-S I12-S I12-T12PL...21 I12-T4PL...21 I12-T6PL...21 I12-T8PL...21 I I I I12-T I12-T I12-T I12-T I12-T I12-FI I12-FI I12-FI I12-FI

55 atalog Number Index T. NO. PG NO. T. NO. PG NO. T. NO. PG NO. I12-MF I12-X I16-90-T I16-90-T I16-90-FI I16-90-GT I I16-T12PL...21 I16-T8PL...21 I16-T I16-FI I16-LK I17-FI I R I R I , 32 I20-T20PL...21 I20-U I20-U I R I R I , 32 I25-FI I I28-U I28-U I , 32 N N N N N N N N N N N N P P P P P P P P P PS PS PS PS PS TP TP08-S...7 TP TP10-S...7 TP TP12-S...7 TP TP16-S...7 TP TP20-S...7 TP TP25-S...7 TP TP28-S...7 TP TP32-S...7 TP TP40-S...7 TP TP50-S...7 SPP SPP SPP SPP SPP SPP SPP SPP K K PS PS08S PS12S PS PS PS PS PS PS PS PS PS PS PS PS PS PS SN SN SN SN SN SN SN H H H H H H H H HN HN HN HN HN Index 53

56 atalog Number Index Index T. NO. PG NO. T. NO. PG NO. T. NO. PG NO. HN HN HN HN HT HT HT HT HT HT HT HT JPS JPS JPS JPS JPS JPS JPS JPS JPS JPS JPS JPS K2I-LH...30 LNP-M LNP-M LNP-M LNP-M LNP-M LNP-M LNP-PG LNP-PG LNP-PG LNP-PG LNP-PG LNP-PG LNP-PG LNP-PG LNP-PG M MS MS MP MP MP MP MP MP MP MP MP MP MPS MPS MPS MPS MPS MPS MPS MPS MPS MPS N N06-S...6 N N08-S...6 N N10-S...6 N N12-S...6 N N16-S...6 N N20-S...6 N N25-S...6 N N28-S...6 N N32-S...6 N N40-S...6 N N50-S...6 NP NP NP PS PS PS PS PS PS PS PS PG21-LK PK PK PK PK PK PP PP PP PP PP PP PP RS RS RS RS RS RS RS RS RS RS RS

57 atalog Number Index T. NO. PG NO. T. NO. PG NO. T. NO. PG NO. RS RS RS RS RSG RSG RSG RSG RSG RSGP RSGP S S S S S S S-M S-M24-S...41 S-M S-M27-S...41 SG SG ST ST20-2X ST ST ST28-4X ST ST ST STN25-3X SWM SWM SWM SWM SWM SWM SWPG SWPG SWPG SWPG SWPG SWPG SWPG SWPG SWPG TP TP TP TP TP TP TP TP TPM TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS Index 55

58 atalog Number Index Index T. NO. PG NO. T. NO. PG NO. TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS TPS XP XPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS YPS

59 Global Leader in Innovative... Wire & able Management able Protection Systems Power onnection & ontrol Safety Technology