MHP-TAM DEVICES. Overtemperature Protection. For Lithium Polymer (LiP) and prismatic cells used in various portable electronic applications
|
|
|
- Richard Jackson
- 5 years ago
- Views:
Transcription
1 MHP-TM EVIES Overtemperature Protection For Lithium Polymer (LiP) and prismatic cells used in various portable electronic applications
2 MHP-TM EVIES Overtemperature Protection The rapidly expanding market for ultra-thin portable electronic devices such as media tablets and ultra-thin Ps has created demand for very thin, low-profile, light-weight and high-capacity Lithium Polymer (LiP) and prismatic cells. new MHP (Metal Hybrid PPT) device, the MHP-TM, offers a 9V rating and a higher current rating than typical battery strap devices to meet the battery safety requirements of higher-capacity LiP and prismatic batteries found in the latest tablet and ultra-thin computing products. Hybrid MHP technology connects a bimetal protector in parallel with a PPT (polymeric positive temperature coefficient) device. The resulting MHP-TM device helps provide resettable overtemperature protection, while utilizing the PPT device to act as a heater and to help keep the bimetal latched until the fault is removed. enefits apable of handling voltages and battery charge rates found in high-capacity LiP and prismatic cells used in cutting-edge applications Helps provide resettable and accurate overtemperature protection ompact size and thin form factor facilitates circuit protection in ultra-thin battery pack designs ustomization of welding leads available to facilitate design Features Two levels of hold current: - Low current (nominal 6 hold ) - High current (nominal 15 hold ) Multiple temperature ratings - (7, 77, 8, 85, 90 ) ompact size (L:5.8mm x W:3.85mm x H:1.15mm) pplications attery cell protection for high-capacity Lithium Polymer and prismatic cells used in: - Notebook Ps - Ultra-book - Tablets - Smart phones
3 MHP-TM evices esign oncept In normal operation, current passes through the bimetal contact due to its low contact resistance. uring an abnormal event, the device reacts to the rise in cell temperature causing the bimetal contact to open at the specified temperature and its contact resistance to increase. t this point, the current shunts to the lower resistance PPT which acts as a heater and helps keep the bimetal protector open and in a latched position until the fault is removed. Rc Rptc Leakage current Electrical haracteristics (Typical) Series Model Number Rating [ ] Nominal Operation Temperature [ ] Reset Temperature [ ] Reference Resistance [mohms] 5 Min Max Min T Typ Max Typical Electrical Rating (5 ) Max. reaking urrent 5V /0 (100 cycles) ontact Rating 9V /1 (6000 cycles) MHP-TM MHP-TM MHP-TM MHP-TM Typical Electrical Rating (5 ) Max. reaking urrent 5V /80 (100 cycles) ontact Rating 9V /5 (6000 cycles) MHP-TM * MHP-TM * MHP-TM * MHP-TM * MHP-TM * * The minimum temperature differential between the actual operation temperature of the device and the reset temperature 3
4 MHP-TM evices Hold urrent vs. Temperature urves MHP-TM MHP-TM urrent () MHP-TM MHP-TM Temperature ( ) MHP-TM MHP-TM urrent () E - MHP-TM MHP-TM E - MHP-TM Temperature ( ) imensions In Millimeters MHP-TM6 and : 5.8 E Min Max -ø E.6.8 (0.) (0.) Unless otherwise specified, all tolerances are 0.1mm.
5 MHP-TM evices Packaging and Marking Information Part Number ag Quantity Standard Package Part Marking 1,000 0,000 Lot I#, ontrol# & o. Logo, Product # 1,000 0,000 Lot I#, ontrol# & o. Logo, Product # gency Recognition Part Number gency Recognition UL & cul File No. E3989; File No. US-3966-M1-UL UL & cul File No. E3989; File No. US-160-UL Part Numbering System MHP TM Nominal ctivation Temperature ontact Voltage Rating Nominal Hold urrent at Room Temperature Product Group Series Name Physical haracteristics Terminals Molding Plastic opper lloy LP (Liquid rystal Polymer) RoHS and Halogen-free ompliance RoHS ompliant Halogen Free per IE Notice: Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, lifesustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and onditions of Sale, unless otherwise agreed by Littelfuse. 5
MHP-TA RESETTABLE TCO DEVICE For Lithium Battery Protection
MHP-TA RESETTABLE TCO DEVICE For Lithium Battery Protection Littelfuse PolySwitch MHP-TA circuit protection device s thermal activation and other advanced features help provide a cost-effective, space-saving
PROTECTING RECHARGEABLE LI-ION AND LI-POLYMER BATTERIES in Portable Electronics
PROTECTING RECHARGEABLE LI-ION AND LI-POLYMER BATTERIES in Portable Electronics Littelfuse offers designers many different protection devices to choose from in an array of form factors and device characteristics
PolyZen Device Helps Protect Portable Electronics from Charger-Induced Failure
PPLITION NOTE from harger-induced Failure automotive power buses. utomotive power buses are notoriously dirty. lthough they are nominally V, they can range in normal operation from V to V. Still, battery
SURFACE-MOUNT FUSES Pulse Tolerant Chip Fuses
SURFACE-MOUNT FUSES have high inrush current withstand capability and provide overcurrent protection for DC power systems. These devices combine a silver fusing element and monolithic, multilayer design
LSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET
LSIMO2E2, 2, 2 mohm, TO-247-3L LSIMO2E2 2 N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS 2 Typical R DS(ON) 2 mω I D ( T ) 8 A ircuit Diagram TO-247-3L Features
LSIC2SD065E40CCA 650 V, 40 A SiC Schottky Barrier Diode
LSIC2SD065E40CCA 650 V, 40 A SiC Schottky Barrier Diode RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
LSIC1MO170E V N-channel, Enhancement-mode SiC MOSFET
LSIMOE,, mohm, TO--L LSIMOE N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS Typical R DS(ON) mω ( T ). A ircuit Diagram TO--L Features * * Body diode Optimized
PORTABLE MEDICAL DEVICES PROTECTION QUICK REFERENCE GUIDE
PORTABLE MEDICAL DEVICES PROTECTION QUICK REFERENCE GUIDE Littelfuse overvoltage, overcurrent and overtemperature circuit help designers provide effective for portable medical products. PolySwitch surface-mount
GEN2 SiC Schottky Diode LSIC2SD120E40CC, 1200 V, 40 A, TO-247-3L. Description. SiC Schottky Diode. Features. Applications.
LSIC2SD12E4CC RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175
AUTOMOTIVE DEVICES QUICK REFERENCE GUIDE
AUTOMOTIVE DEVICES QUICK REFERENCE GUIDE Littelfuse PolySwitch devices for automotive applications offer overcurrrent, overvoltage, PCB trace fault, and thermal protection for your vehicle s sensitive
CHIPSESD DEVICES BENEFITS APPLICATIONS FEATURES
CHIPSES EVICES Littelfuse s ChipSES family of Silicon ES devices, available in EIA-0201 and EIA-0402 sized rectangular SMT passive component packages, can help protect electronic circuits against damage
SURFACE-MOUNT FUSES Slow-Blow Chip Fuses
SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges
LSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET
LSIC1MO120E0160 1200 N-channel, Enhancement-mode SiC MOSFET RoHS Pb Product Summary Characteristics alue Unit DS 1200 Typical R DS(ON) 160 mω I D ( T C 100 C) 14 A Circuit Diagram TO-247-3L Features *
LSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode
LSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
GEN2 SiC Schottky Diode LSIC2SD120A20, 1200 V, 20 A, TO-220-2L. Description. SiC Schottky Diode. Features. Environmental
LSIC2SD12A2, 12 V, 2 A, TO-22-2L LSIC2SD12A2 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating
Description. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSIC2SD12C1, 12 V, 1 A, TO-252-2L (DPAK) LSIC2SD12C1 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
SURFACE-MOUNT FUSES Slow-Blow Chip Fuses
SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges
Description. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSICSD1A5, 1 V, 5 A, TO--L LSICSD1A5 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction
GEN2 SiC Schottky Diode. Description. SiC Schottky Diode. Features. Applications. Environmental
GEN2 LSIC2SD12A8, LSIC2SD12C8, 12 V, 8 A, A, TO-252-2L TO-22-2L(DPAK) LSIC2SD12C8 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high
LSIC2SD120A10. GEN2 SiC Schottky Diode LSIC2SD120A10, 1200 V, 10 A, TO-220-2L. RoHS. Description
LSIC2SD12A1 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175
Specification Status: Released
PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released
SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES
SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES Table F1 Environmental Specifications for Table F2 Fuses Operating Temperature Mechanical Vibration
PolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description
Low Rho SMD Series Description PolySwitch low resistivity SMD (surface-mount device) is a versatile device well suited for general applications which have space-constrained, low power dissipation and high
Techniques for Protecting Smart Sweeping Robots
the consumer. This article discusses several solutions for improving the protection of smart sweeping robots. Resettable Circuit Protection with PPTC Devices Abstract In recent years the development of
Gas Discharge Tubes GTCX25-XXXM-R02 Series
Littelfuse Circuit Protection 5mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
GasDischarge Tubes GTCX28-XXXM-R10 Series
GasDischarge Tubes Littelfuse Circuit Protection 8mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and
Specification Status: Released
PAGE NO.: OF 8 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt
LSIC2SD065C06A 650 V, 6 A SiC Schottky Barrier Diode
LSICSD065C06A 650 V, 6 A SiC Schottky Barrier Diode Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating
POLYSWITCH RESETTABLE DEVICES Automotive Devices
POLYSWIT RSTTL VIS utomotive evices We have provided PPT resettable devices for the automotive industry for over 25 years. With the advent of TS16949 and our continued involvement in the automotive industry,
Gas Discharge Tubes GTCC23-XXXM-R01-2 Series
Littelfuse Circuit Protection 3mm 2Pole Chip type GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
GAS DISCHARGE TUBES (GDTS)
GAS DISCHARGE TUBES (GDTS) Littelfuse's GDTs (Gas Discharge Tubes) are placed in front of, and in parallel with, sensitive telecom equipment such as power lines, communication lines, signal lines and data
Specification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt
SPF SERIES SOLAR FUSES
Vdc - A Specifications Voltage Rating VDC Amperage Rating,,,.,,,,, 0,,,,, Max. Interrupting Rating ka - A - A ka - A - A Time Constant ms Material Body: Melamine Caps: Copper Alloy Approvals UL - Listed
GTCX35-XXXM-R05 Series
Littelfuse Circuit Protection 5mm 3Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
PolySwitch Resettable Devices Automotive Devices
PolySwitch Resettable evices utomotive evices We have provided PPT resettable devices for the automotive industry for over 25 years. With the advent of TS16949 and our continued involvement in the automotive
Specification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
Komatsulite HC Series Breaker
*RoHS COMPLIANT & **HALOGEN FREE 33 11515 V HC82AY 1 Features High current type Overtemperature and overcurrent protection for lithium polymer and prismatic cells Controls abnormal, excessive current instantaneously
Specification Status: Released
PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
KLKD SERIES 10x38 FUSES
KLKD SERIES 0x FUSES 0 Vac/dc /0- A Fast Acting Description The KLKD fuse series is fast-acting with a high DC voltage rating. This family of Midget style fuses (0 x mm) is used in solar combiner boxes
LC Series Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE 0 8 1 2 2 1 5 IX L C 7 7 AY 1 Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Low current type n Overtemperature and overcurrent protection for
NR Series Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE 6 7 5 1 1 2 1 5 C N R 7 7 C B 0 1 1 5 5 C N R 7 2 A B 0 Features n Miniature Thermal Cutoff (TCO) device n Smallest body size, high current type n Overtemperature and overcurrent
SA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
SA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
Features. P d max. (W) V max (Vdc) I max (A)
POLY-FUSE Resettable PTs Radial Leaded > USR Series USR Series RoHS escription The USR Series radial leaded device is designed to provide overcurrent protection for US applications where space is not a
1SMA10CAT3G Series, SZ1SMA10CAT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Bidirectional
110CAT3G Series, SZ110CAT3G Series 400 Watt Peak Power Zener Transient Voltage Suppressors Bidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
NS6A5.0AFT3G, SZNS6A5.0AFT3G Series. 500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
OBSOLETE/EOL NS65.0FT3G, SZNS65.0FT3G Series DTE June/30/2018 PCN/ECN# LFPCN41246 REPLCED BY SM6L Series 500 Watt Peak Power Zener Transient Voltage Suppressors Littelfuse.com Unidirectional The NS6xxFT3G
MAC12D, MAC12M, MAC12N. Triacs. Silicon Bidirectional Thyristors. TRIACS 12 AMPERES RMS 400 thru 800 VOLTS
MAC2D, MAC2M, MAC2N Triacs Silicon Bidirectional Thyristors Designed for high performance fullwave ac control applications where high noise immunity and commutating di/dt are required. Features Blocking
Mini-Breakers. Miniature Thermal Cu toff Devices
Mini-Breakers Miniature Thermal Cu toff Devices Mini-Breaker Introduction INTRODUCTION The potential dangers of lithium-ion batteries have become headline news in recent times. Battery problems in some
DATASHEET. Automotive Surface-Mount Devices miniasmd/microasmd/nanoasmd/ahs/asmd Series
TSHT utomotive Surface-Mount evices minism/microsm/nanosm/hs/sm Series Since the 980 s we have provided PPT resettable devices for the automotive industry. In vehicle electronic equipment, our PolySwitch
SC Series Breaker (Surface Mount Thermal Cutoff Device)
00 SC 7 7 A 4134N Features n Miniature Thermal Cutoff (TCO) device n Surface mount, smallest body size n Overtemperature and overcurrent protection n Controls abnormal, excessive current virtually instantaneously,
APPLICATION NOTE. Package Considerations. Board Mounting Considerations. Littelfuse.com
package. Compared to products in plastic molded packages, the SESD device offers a significant performance-per-boardarea advantage. The SESD package and a dimensional view of the package bottom are shown
MF-R Series - PTC Resettable Fuses
TV Rheinland *RoHS OMPLINT R 0 080T Features Radial Leaded evices ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements RoHS compliant* gency recognition: pplications lmost
KCA Series A-Type Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE Features Formerly a product Miniature Thermal Cutoff (TCO) device High current type Optimal corrosion resistant properties Smaller body size: L5.4 x W3.2 x H0.89 mm Overtemperature
KCA Series A-Type Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n High current type n Optimal corrosion resistant properties n Smaller body size: L5.4 x W3.2 x H0.89
APPLICATION NOTE. Littelfuse.com. Prepared by: Alex Lara, Gabriel Gonzalez, and Dalila Ramirez Thyristor Applications Engineers
Littelfuse.com Prepared by: lex Lara, abriel onzalez, and Dalila Ramirez Thyristor pplications Engineers PPLICTION NOTE INTRODUCTION In the big variety of the.c. applications in which the thyristor technology
AC4DLM. Sensitive Gate Triacs. Silicon Bidirectional Thyristors TRIACS 4.0 AMPERES RMS 600 VOLTS
Sensitive ate Triacs Silicon Bidirectional Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control.
AND8007/D. Momentary Solid State Switch for Split Phase Motors APPLICATION NOTE
Momentary Solid State f Split Phase Mots Littelfuse.com APPLICATION NOTE INTRODUCTION In control applications f mots the choice of the solid state switch to be used is always very imptant f the designers:
Surface Mount > 250S Series. Description. Features. Applications. Customer Premises Equipment (CPE) Central Office (CO)/ telecom centers.
POLY-US Resettable PTs 250S Series RoS escription The 250S igh Voltage Radial device is a Polymer-based PT suitable to protect telephony equipment against lightining and power cross strikes. The 250S Series
Electronic Temperature Control & Bulb Well Assembly (AC)
Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed
MF-R Series - PTC Resettable Fuses
R010 Features Radial Leaded evices ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements ulk packaging, tape and reel and mmo- Pak available on most models gency recognition:
MF-R Series - PTC Resettable Fuses
*RoHS OMPLINT & **HLOGN FR R0 780T Features n Radial Leaded evices n ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements n RoHS compliant* and alogen free** n gency recognition:
BATTERY PACK OVERVIEW WHITE PAPER
BATTERY PACK OVERVIEW WHITE PAPER BACKGROUND With the exponential growth, increasing complexity and computing power of virtually all electronics applications (particularly portable devices) comes the need
Implementing Overtemperature and Overcurrent Protection Matching Today s Higher Current Capacity Lithium-Ion Batteries
WHITE PAPER INTRODUCTION Technology advancements have succeeded in lowering the power consumption in electronic components, which has enabled battery suppliers to offer increasingly dense and larger storage
2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
ECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to
New Circuit Protection Platforms. March 2011 APEC
New Circuit Protection Platforms March 2011 APEC TE is a World Leader Enabling Connectivity Serving Large Attractive Markets Consumer Industrial and Infrastructure Transportation Consumer Communications
2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
A16 Series PTC Devices
PROUT TSHEET Series PT evices Series PT evices escription JTFUSE Series Radial Leaded PTs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With
Keeping Higher Current Lithium-ion Battery Cells Safe with Effective Overtemperature Protection
Keeping Higher Current Lithium-ion Battery Cells Safe with Effective Overtemperature Protection INTRODUCTION WHITE PAPER The explosion in use of consumer electronics is the result of multiple trends not
ATN3580 Series: Fixed Attenuator Pads
DATA SHEET ATN3580 Series: Fixed Attenuator Pads Applications Attenuators Features Specified flat response to 40 GHz Return loss > 15 db Available at 1-10, 12, 15, 20, 30, and 40 db Power handling to 1
ProLogium Lithium Ceramic Battery Profile
ProLogium Lithium Ceramic Battery Profile 2018.07 About ProLogium Milestone Technology Target market About ProLogium ProLogium TM Technology (PLG) is a next generational Lithium battery cell maker who
XACA871 pendant control station XAC-A - 8 pushbuttons
haracteristics pendant control station XA-A - 8 pushbuttons Main Range of product Product or component type Device short name omplementary ontrol station type Enclosure material Electrical circuit type
SF-0603S Series - Slow Blow Surface Mount Fuses
SinglFuse SF-0603S Series Features n Slow blow thin film chip fuse for overcurrent protection n 608 (EI 0603) miniature footprint n Surface mount packaging for automated assembly n UL listed (UL 248-4)
VLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
Wirewound Resistors, Industrial Power, Vitreous Coated, Adjustable Edgewound Tubular
Wirewound Resistors, Industrial Power, Vitreous oated, djustable Edgewound Tubular STNR ELETRIL SPEIFITIONS GLOL HISTORIL POWER RTING P 25 W FETURES High temperature vitreous coating omplete welded construction
MI-ComPAC DC-DC Switchers
MI-omP - Switchers 5 3 Watts; 1 3 Outputs eatures & enefits Inputs 28 and 27V Transient protection: 28V designed to meet MIL-ST-74-, MIL-ST-1275// and O-16 One, two or three outputs Outputs: 2 48V Up to
MCC. THRU. Features. 1.0 Amp Single Phase Glass Passivated Bridge Rectifier 200 to 1000 Volts. Mechanical Data LMBS -1
M Micro ommercial omponents Features Mechanical Data M Part Number Marking Recurrent Peak Reverse omponents 20736 Marilla Street hatsworth!"# $%!"# Low Profile: Typical height of 1.4mm High Temperature
Compact / Lightweight 2 Port Solenoid Valve
ompact / Lightweight 2 Port Solenoid Valve /-XF For ir/water ompact / Lightweight resin body (PPS) Weight: 20 g (-XF) RoHS IP65 mm Power consumption 3 W (Standard) 0.5 W (With power-saving circuit) 48
Features. Continuous ZA Series Units. ) 4 to 460 V DC Voltage Range (V M(DC) ) 5.5 to 615 V Transients: Peak Pulse Current (I TM
ZA Varistor Series RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems.
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS FEH Series Radial Lead, 125 C Low CUSTOMER APPROVAL : *Contents in this sheet are subject to change without prior notice. 1. Features Ultra Low & high ripple
PLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
58T Series. Adjustable Temperature Controls. Adjustable Temperature Controls
58T Series Adjustable Temperature Controls Adjustable Temperature Controls The 58T line of adjustable temperature controls from is designed for applications requiring accurate calibration tolerances and
NEMA Contactors & Starters A200
March 007 NM ontactors & Starters 00 ontactors Non-reversing and Reversing -7 ontents escription Page ontactors Non-reversing and Reversing............ -7 Product escription Sizes 00 4............ -7 Product
PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9.
FETURES PPLITIONS PRT NUMER ESIGNTION P R P - M S M F 0 7 5 / 4 X - E- 9 9 Product name Product number Hold current (I hold) Higher voltage option lankstandard 6 6 volt rated 4 4 volt rated0 0 volt rated
Definite Purpose Control. Product Focus
Product Focus Innovation in Eaton s utler-hammer efinite Purpose (P) ontactors are designed to improve control of refrigeration, air conditioning, ventilation and resistance heating applications. The
R-Rated medium voltage fuses for motor circuit protection
Technical ata 6001 Supersedes September 2017 Features and benefits escription: Indoor/enclosure, R-Rated medium voltage, current-limiting fuses for motor circuit protection. urrent-limiting R-Rated fuses
EEA & EEB Series. UL Recognized CSA Certified VDE Approved EEA2 / EEB2
atalog: 16541 Issue ate: 6.11 Including the S/S and H/H Models ost-effective MI Power Inlet Filter UL Recognized S ertified V pproved 2 / 2 1 / 1 P / P Series ompact single stage MI filter with I 63-1
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature
Aluminum Electrolytic Capacitors Radial Standard Ultra Miniature FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue
Output Current Input Current Over Voltage. VDC VDC ma ma(typ.) ma(typ.) VDC μf % MKZI10-24S
Doc. E-92 MKZI1 SERIES D/D ONVERTER 1W, Reinforced Insulation, Railway ertified FEATURES Industrial Standard 2" 1" Package Ultra-wide Input Range 9-36VD, 18-75VD, -1VD I/O Isolation 3VA with Reinforced
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
Specifications. Model/Rated Flow Rate. Accessory/Option. Differential pressure indicator
Oil Filter FH150 Series RoHS ompact and lightweight The compact and lightweight design employs an aluminum alloy cover. Easy maintenance The element slides into place, making it easy to install and remove.
G7150D, 3-Way, Diverting Flanged Globe Valve
G7150D, 3-ay, Diverting Flanged Globe Valve pplication This valve is typically used in Large ir Handling Units on heating or cooling coils. This valve is suitable for use in a hydronic system with variable
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
HPS Imperator Machine Tool Industrial Control Transformer
HPS Imperator Machine Tool Industrial ontrol Transformer The Perfect Solution The HPS Imperator line of machine tool industrial control transformers are specifically designed to meet the high inrush industrial
PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9.
FETURES PPLITIONS PRT NUMER ESIGNTION P R P - M S M F 0 7 5 / 4 X - E- 9 9 Product name Product number Hold current (I hold) Higher voltage option lankstandard 66 volt rated volt rated 4040 volt rated
Transient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T
SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,
American Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 200 Vdc 4 Low Profile 4 High Regulation 4 Ultra Wide Input Ranges (9-36Vdc, 20-60Vdc, 36-72Vdc) 4 1000 Vdc Output Isolation 4 Continuous Short Circuit
HV Supercapacitors Cylindrical cells
HV Supercapacitors Cylindrical cells Supersedes October 2015 Pb HALOGEN HF FREE Features Ultra low ESR for high power density UL recognized Applications Electric, Gas, Water smart meters Controllers RF
Indoor Linear 50W Driver SI-CU WW
Product Data Sheet Rev.2.0 2016. 5. 27 1# LED Driver Indoor Linear 50W Driver SI-CU1425001WW Constant Current LED Driver Features & Benefits Output Current Range: 500~1400 ma (adjustable via R-set) Output
Description. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSICSD1A5 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175 C.