Surface Mount > 250S Series. Description. Features. Applications. Customer Premises Equipment (CPE) Central Office (CO)/ telecom centers.

Size: px
Start display at page:

Download "Surface Mount > 250S Series. Description. Features. Applications. Customer Premises Equipment (CPE) Central Office (CO)/ telecom centers."

Transcription

1 POLY-US Resettable PTs 250S Series RoS escription The 250S igh Voltage Radial device is a Polymer-based PT suitable to protect telephony equipment against lightining and power cross strikes. The 250S Series is fully compatible with telecommunications standards, and is offered in horizontal and new vertical surface mount package. eatures Agency Approvals ANY ANY L NUMR RoS ompliant, irective 2002/95/ Lead-ree & alogen-ree Low resistance ompatible with telecom standards elps meets TU K.20, K.21/Telcordia standards xcellent solder joint inspectability igh voltage Applications Additional nformation R ustomer Premises quipment (P entral Office (O/ telecom centers LAN/WAN equipment Access equipment atasheet Resources Samples lectrical haracteristics evice Mounting Layout hold (A trip (A V max (V int /V op max (A P d typ. (W Time to Trip at 1A Typical (Sec. Maximum (Sec. R min (Ω Resistance R max (Ω R 1max (Ω Agency Approvals / RA / orizontal R / R / V Vertical / hold = old current: maximum current device will pass without tripping in 20 still air. trip = Trip current: minimum current at which the device will trip in 20 still air. V int = Maximum voltage the device can withstand without damage at rated current ( max V op = The device regular operation voltage max = Maximum fault current device can withstand without damage at rated voltage (V max P d = Power dissipated from device when in the tripped state at 20 still air. R min = Minimum resistance of device in initial (un-soldered state. R max = Maximum resistance of device in initial (un-soldered state. R 1max = Maximum resistance of device at 20 measured one hour after tripping. aution: Operation beyond the specified rating may result in damage and possible arcing and flame. WARNN Users shall independently assess the suitability of these devices for each of their applications Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire These devices are intended to protect against the effects of temporary over-current or overtemperature conditions and are not intended to perform as protective devices where such conditions are expected to be repetitive or prolonged in duration xposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPT devices These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses ircuits with inductance may generate a voltage (L di/dt above the rated voltage of the PPT device.

2 POLY-US Resettable PTs Temperature Rerating Ambient Operation Temperature old urrent (A Average Time urrent urves Temperature Rerating urve A 250S Time in Seconds Percentage of rated current % evice Ambient Temperature º urrent in Amperes The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. ustomer must verify the performance in their application. Agency Specification Selection uide or Telecom and Networking Applications Product Lightning Power ross V -RA -R -R TU K.20/21/45 1.5kV 10/700μs TU K.20/21/45 230Vac, 10Ω Protection Application uide Region/ Specification TU K.45 TU K.21 TU K.20 Application Access network equipment Remote terminal Repeaters WAN equipment ross connect ustomer and T equipment Analog modems ASL, xsl Phone sets, PX systems nternet appliances POS terminals entral Office POTS/SN linecards T1/1/J1 linecards ASL/VSL splitters SU/SU evice Selection V -RA -R -R V -RA -R -R V -RA -R -R

3 Temperature POLY-US Resettable PTs Soldering Parameters Profile eature Average Ramp-Up Rate (T S(max to T P Pre eat: Temperature Min (T s(min 150 Temperature Max (T s(max 200 Pb-ree Assembly 3 /second max Time (Min to Max (t s secs Time Maintained Temperature (T L 217 Above: Temperature (t L seconds Peak / lassification Temperature (T P /-5 Time within 5 of actual peak Temperature (t p Ramp-down Rate Time 25 to peak Temperature (T P seconds 6 /second max 8 minutes Max. T P T L T S(max T S(min 25 t S Preheat time to peak temperature Ramp-up t P t L Ramp-down Time ritical Zone t L to t P -- All temperature refer to topside of the package, measured on the package body surface -- f reflow temperature exceeds the recommended profile, devices may not meet the performance requirements -- Recommended reflow methods: R, vapor phase oven, hot air oven, N 2 environment for lead -- Recommended maximum paste thickness is 0.25mm (0.010 inch -- evices can be cleaned using standard industry methods and solvents -- evices can be reworked using the standard industry practices Physical Specifications nvironmental Specifications Terminal Material Solder-Plated opper (Solder Material: Matte Tin(Sn Operating/Storage Temperature -40 to +85 Lead Solderability Meets A Specification RS186-9, ANS/ J-ST-002 ategory 3. Maximum evice Surface Temperature in Tripped State 125 Passive Aging +85, 1000 hours umidity Aging +85, 85%,R..,1000 hours Thermal Shock ML ST 202, Method to times Solvent Resistance ML ST 202, Method 215 Moisture Sensitivity Level Level 1, J ST 020

4 POLY-US Resettable PTs imensions A A Part nch mm nch mm nch mm nch mm nch mm Material nch mm nch mm nch mm Number Max. Max. Max. AMax. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max Soldering Sn/Ni/u Pad Layout RA A Sn/Ni/u R Sn/Ni/u R Sn/Ni/u J A J A J Part nch mm nch mm nch mm nch mm nch mm nch mm Material nch mm nch mm nch mm nch mm Number Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. Max. V Sn/Ni/u Part Ordering Number System 250 S 130 -RA R PAKAN STYL R: Tape & Reel QUANTTY O: =1500 Z=1200 OPTON O (LANK = orizontal / 4-13Ω resistance range V = Vertical / 4-13Ω resistance range -RA = orizontal / Ω resistance range -R = orizontal / 9-13Ω resistance range -R = orizontal / 7-11Ω resistance range OL URRNT O (Refer to lectrical haracteristics Table SURA MOUNT PAK VOLTA RATN Packaging Ordering Number hold (A hold ode Packaging Option Quantity Quantity & Packaging ode R Tape and Reel 1500 R V VZR Tape and Reel 1200 ZR RA RAR Tape and Reel 1500 R R RR Tape and Reel 1500 R R RR Tape and Reel 1500 R

5 POLY-US Resettable PTs Tape and Reel Specifications TAP SPATONS: A (mm RL MNSONS: A (mm W 16 +/ / / W / / Ø / Ø13.0+/ (MN Ø340+/- 1.0 P / /- 0.5 P / W /- 0.5 P / W A / W / W T max 0.4 +/ K / Leader Min. 300 Trailer Min. 300 Tape and Reel iagram P 1 P 0 0 P 2 1 W 4 W 3 W W 2 T 2 W W 1 A 0 K isclaimer Notice - nformation furnished is believed to be accurate and reliable. owever, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete isclaimer Notice at

POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description

POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description 2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free

More information

Features. V max (Vdc) I max (A) typ. (W) P d

Features. V max (Vdc) I max (A) typ. (W) P d 2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free

More information

Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)

Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) 0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

Features. Samples. I max (A) P d. typ. (W)

Features. Samples. I max (A) P d. typ. (W) 0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.) 1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)

Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A) 1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free

More information

Features. P d max. (W) V max (Vdc) I max (A)

Features. P d max. (W) V max (Vdc) I max (A) POLY-FUSE Resettable PTs Radial Leaded > USR Series USR Series RoHS escription The USR Series radial leaded device is designed to provide overcurrent protection for US applications where space is not a

More information

POLYFUSE Resettable PTCs Surface Mount > 2920L Series

POLYFUSE Resettable PTCs Surface Mount > 2920L Series Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY

More information

2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description

2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free

More information

Radial Leaded > 250R Series. Description. Features. Applications. Customer Premises Equipment (CPE) Central Office (CO)/ telecom centers

Radial Leaded > 250R Series. Description. Features. Applications. Customer Premises Equipment (CPE) Central Office (CO)/ telecom centers 250R Series RoHS * Description The 250R Series is designed to protect against short duration high voltage fault currents (power cross or power induction surge) typically found in telecom applications (250Vrms).

More information

Features. P d typ. (W) I max (A)

Features. P d typ. (W) I max (A) 250R Series RoHS * Description The 250R Series is designed to protect against short duration high voltage fault currents (power cross or power induction surge) typically found in telecom applications (250Vrms).

More information

POLYFUSE Resettable PTCs Surface Mount > 2920L Series

POLYFUSE Resettable PTCs Surface Mount > 2920L Series Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY

More information

Radial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)

Radial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) 72R Series RoHS * Description The 72R Series is designed to provide overcurrent protection to 72Vdc maximum voltage with a maximum 40A short circuit rating. Features 72Vdc max voltage w/max 40A short circuit

More information

Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B

Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER

More information

Features 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc)

Features 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc) 60R Series RoHS * Description The 60R Series radial leaded device is designed to provide overcurrent protection for ( 60V) applications where space is not a concern and resettable protection is preferred.

More information

Radial Leaded > 16R Series. Description. Features. Applications. Additional Information. Datasheet. Maximum Time To Trip Current (A) P d typ.

Radial Leaded > 16R Series. Description. Features. Applications. Additional Information. Datasheet. Maximum Time To Trip Current (A) P d typ. 16R Series RoHS Description Littelfuse 16R Series Radial Leaded PTCs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With maximum 16 volts and

More information

PolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description

PolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description Low Rho SMD Series Description PolySwitch low resistivity SMD (surface-mount device) is a versatile device well suited for general applications which have space-constrained, low power dissipation and high

More information

Positive Temperature Coefficient (PTC) Data Sheet

Positive Temperature Coefficient (PTC) Data Sheet Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable

More information

POLY-FUSE Resettable PTCs Surface Mount > 1206L Series

POLY-FUSE Resettable PTCs Surface Mount > 1206L Series Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER

More information

POLY-FUSE Resettable PTCs Radial Leaded > 250R Series

POLY-FUSE Resettable PTCs Radial Leaded > 250R Series Radial Leaded > Description The is designed to protect against short duration high voltage fault currents (power cross or power induction surge) typically found in telecom applications (250Vrms). The series

More information

POLYSWITCH RESETTABLE DEVICES Automotive Devices

POLYSWITCH RESETTABLE DEVICES Automotive Devices POLYSWIT RSTTL VIS utomotive evices We have provided PPT resettable devices for the automotive industry for over 25 years. With the advent of TS16949 and our continued involvement in the automotive industry,

More information

Low profile Fast response to fault current Compatible with high temperature solders

Low profile Fast response to fault current Compatible with high temperature solders Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable for ultra portable applications where space

More information

PolySwitch Resettable Devices Automotive Devices

PolySwitch Resettable Devices Automotive Devices PolySwitch Resettable evices utomotive evices We have provided PPT resettable devices for the automotive industry for over 25 years. With the advent of TS16949 and our continued involvement in the automotive

More information

Fast response to fault current. General electronics. Maximum Time To Trip Current (A) Pd typ (W) Imax (A)

Fast response to fault current. General electronics. Maximum Time To Trip Current (A) Pd typ (W) Imax (A) Description The 1812 series provides surface mount resettable overcurrent protection with holding current from 0.1A to 3.0A. This series offers complete portfolio in terms of holding current and working

More information

PRODUCT CATALOG & DESIGN GUIDE

PRODUCT CATALOG & DESIGN GUIDE PRODUCT CATALOG & DESIGN GUIDE Positive Temperature Coefficent (PTC) Thermistor Products TABLE OF CONTENTS Series Name Specifications, are descriptions subject to and change illustrative without material

More information

Computer Game machines Automotive Portable electronics Telephony and broadband Industrial controls Multimedia Mobile phones Battery

Computer Game machines Automotive Portable electronics Telephony and broadband Industrial controls Multimedia Mobile phones Battery LP-ISM series Features Very small size of 0805 Fast tripping resettable circuit protection Surface mount packaging for automated assembly Agency recognition: UL CSA TUV Applications: Computer Game machines

More information

Low profile Fast response to fault current Compatible with high temperature solders

Low profile Fast response to fault current Compatible with high temperature solders Description The 1206 series provides miniature surface mount overcurrent protection with holding current from 0.05A to 2.0A. This series is suitable for wide range of applications in modern electronics

More information

Surface Mountable PTC Resettable Fuse: JK-mSMD Series

Surface Mountable PTC Resettable Fuse: JK-mSMD Series Surface Mountable PTC Resettable Fuse: Features: RoHS Compliant & Halogen Free faster tripping, 1812 Dimension, Surface mountable, Solid state Operation Current: 0.10A~3.50A Maximum Voltage: 6V~60Vdc Operating

More information

Surface Mountable PTC Resettable Fuse: JK-SMD0805 Series

Surface Mountable PTC Resettable Fuse: JK-SMD0805 Series Surface Mountable PTC Resettable Fuse: Features: RoHS Compliant & Halogen Free faster tripping, 0805 Dimension, Surface mountable, Solid state Operation Current: 0.05A~1.10A Maximum Voltage: 6V~15Vdc Operating

More information

DATASHEET. Automotive Surface-Mount Devices miniasmd/microasmd/nanoasmd/ahs/asmd Series

DATASHEET. Automotive Surface-Mount Devices miniasmd/microasmd/nanoasmd/ahs/asmd Series TSHT utomotive Surface-Mount evices minism/microsm/nanosm/hs/sm Series Since the 980 s we have provided PPT resettable devices for the automotive industry. In vehicle electronic equipment, our PolySwitch

More information

SPHV-C Series 200W Discrete Bidirectional TVS Diode

SPHV-C Series 200W Discrete Bidirectional TVS Diode SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed

More information

A16 Series PTC Devices

A16 Series PTC Devices PROUT TSHEET Series PT evices Series PT evices escription JTFUSE Series Radial Leaded PTs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With

More information

AQHV Series 200W Discrete Unidirectional TVS Diode

AQHV Series 200W Discrete Unidirectional TVS Diode AQHV Series W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The AQHV series is designed to provide an option for very fast acting, high performance over-voltage protection devices. Ideally

More information

Low profile Fast response to fault current Compatible with high temperature solders

Low profile Fast response to fault current Compatible with high temperature solders Description The 1206 series provides miniature surface mount overcurrent protection with holding current from 0.12A to 2.0A. This series is suitable for wide range of applications in modern electronics

More information

Fast response to fault current. Pd typ (W) Imax (A)

Fast response to fault current. Pd typ (W) Imax (A) Description The 1812 series provides surface mount resettable overcurrent protection with holding current from 0.1A to 3.0A. This series offers complete portfolio in terms of holding current and working

More information

SM24CANB Series 500W TVS Diode Array

SM24CANB Series 500W TVS Diode Array SM4CANB Series 5W TVS Diode Array RoHS Pb GREEN Description The SM4CANB TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD,

More information

SM Series 400W TVS Diode Array

SM Series 400W TVS Diode Array General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic

More information

AQxxC Series 450W Discrete Bidirectional TVS Diode

AQxxC Series 450W Discrete Bidirectional TVS Diode AQxxC Series 5W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC

More information

TVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.

TVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN. SP202L Series 3.3V 7A Diode Array RoHS Pb GREEN Description The SP202L provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance

More information

FUZETEC TECHNOLOGY CO., LTD.

FUZETEC TECHNOLOGY CO., LTD. NO. PQ18-01ER Product Specification and Approval Sheet Version A9 Page 1/5 Surface Mountable PTC Resettable Fuse: FSMD1206 Series 1. Summary (a) RoHS Compliant & Halogen Free (b) Applications: All high-density

More information

PLED Ultra Low Holding Current Series

PLED Ultra Low Holding Current Series RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching

More information

Gas Discharge Tubes SL1002A Series

Gas Discharge Tubes SL1002A Series SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially

More information

LP-ISM(L) Series. Features. Product Dimensions. Agency recognition: UL CSA TUV. Small size of Fast tripping resettable circuit protection

LP-ISM(L) Series. Features. Product Dimensions. Agency recognition: UL CSA TUV. Small size of Fast tripping resettable circuit protection LP-ISM(L) Series Surface-mount devices Features Small size of 0805 Fast tripping resettable circuit protection Surface mount packaging for automated assembly Agency recognition: UL CSA TUV Product Dimensions

More information

Teccor brand Thyristors Standard Bidirectional SIDACs

Teccor brand Thyristors Standard Bidirectional SIDACs Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance

More information

n For use in telecommunication circuit applications requiring low current protection with high surge tolerance

n For use in telecommunication circuit applications requiring low current protection with high surge tolerance *RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring

More information

MF-R Series - PTC Resettable Fuses

MF-R Series - PTC Resettable Fuses *RoHS OMPLINT & **HLOGN FR R0 780T Features n Radial Leaded evices n ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements n RoHS compliant* and alogen free** n gency recognition:

More information

6125FF Fast-acting subminiature fuses

6125FF Fast-acting subminiature fuses Fast-acting subminiature fuses Supersedes March 2015 Applications Power supplies Servers LED/LCD televisions Appliances and white goods LCD monitor/backlight inverters Laptops and notebooks Agency information

More information

MF-R Series - PTC Resettable Fuses

MF-R Series - PTC Resettable Fuses TV Rheinland *RoHS OMPLINT R 0 080T Features Radial Leaded evices ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements RoHS compliant* gency recognition: pplications lmost

More information

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are

More information

MF-R Series - PTC Resettable Fuses

MF-R Series - PTC Resettable Fuses R010 Features Radial Leaded evices ured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements ulk packaging, tape and reel and mmo- Pak available on most models gency recognition:

More information

SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL SPEIFITION FOR PPROVL Ⅰ. onfiguration and dimensions: 'S W NO. S0704 F - REV. 20130727- PE 1 1R0 E F (P Pattern) Unit:m/m 7.30 ±0.2 7.30 ±0.2 4. ±0.2 2.00 typ. E 4.60 typ. F 4.80 ref. 2.40 ref. 1. ref.

More information

Tablet PC Automotive applications Printer Security systems VOP (V) Ibreak (A)

Tablet PC Automotive applications Printer Security systems VOP (V) Ibreak (A) Description Current Limiting Module (CLM) is a chip type surface mountable device that can protect against both overcurrent and overcharging. It comprises a fuse element to ensure stable operation under

More information

CC06H High I 2 t Chip 0603 size fuses

CC06H High I 2 t Chip 0603 size fuses Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth

More information

Gas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series

Gas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount

More information

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four

More information

No. Test Requirement Test Condition Test Reference. 10 cycles

No. Test Requirement Test Condition Test Reference. 10 cycles *RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and

More information

SFRX Polymer PTC Thermistor SFRX ROHS

SFRX Polymer PTC Thermistor SFRX ROHS Polymer PTC Thermistor ROHS Features Radial leaded devices;;; Quick trip time Low parasitic capacitance, flat impedance with frequency. RoHS compliant. Resettable. Design for lead free solder termination.

More information

Features. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS

Features. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the

More information

Glass Encapsulated SMD Varistor MLV

Glass Encapsulated SMD Varistor MLV (VJ12, 2, 13, 14, 15, 32) Transient Voltage Suppression, ESD Protection Devices & EMI Devices GENERAL DESCRIPTION AVX s Professional Multilayer Varistors include 3 series of glass coated products as listed

More information

SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description

SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series

More information

SIDACtor Protection Thyristors Baseband Protection (Voice-DS1)

SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides

More information

0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M

0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M *RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250

More information

MF-PSMF Series - PTC Resettable Fuses

MF-PSMF Series - PTC Resettable Fuses *RoHS COMPLIANT Features Compact design to save board space - 0805 footprint Small size results in very fast time to react to fault events Symmetrical design Low profile RoHS compliant* and halogen free**

More information

Specification Status: Released

Specification Status: Released PAGE NO.: 1 OF 9 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt

More information

Sensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C

Sensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are

More information

FSMD Page 8-12

FSMD Page 8-12 OVERVIEW FRX... Page 2-4 FRU... Page 5-7 FSMD 2920... Page 8-12 FSMD 1210... Page 13-15 FSMD 1206... Page 16-18 FSMD 0805... Page 19-21 3 1 Radial Leaded PTC Resettable Fuse : FRX Series 1. Summary (a)

More information

SinglFuse SF-1206HIxxxM Series Features

SinglFuse SF-1206HIxxxM Series Features E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen

More information

Features. Continuous AUML Series Units. ) 1.5 to 25 J Jump Start Capability (5 minutes), (V JUMP. ) 48 V Operating Ambient Temperature Range (T A

Features. Continuous AUML Series Units. ) 1.5 to 25 J Jump Start Capability (5 minutes), (V JUMP. ) 48 V Operating Ambient Temperature Range (T A AUML Varistor Series RoHS Description The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most

More information

Transient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T

Transient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,

More information

Specification Status: Released

Specification Status: Released PAGE NO.: OF 8 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt

More information

SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics

SinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics *RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed

More information

Dear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955

Dear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955 Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing

More information

Axial Lead & Cartridge Fuses 5 20 mm > Time-Lag > 215 Series

Axial Lead & Cartridge Fuses 5 20 mm > Time-Lag > 215 Series 5 20 mm > Time-Lag >, 5 x 20 mm, Time-Lag (Slo-Blo ) Fuse Description 5x20mm Time-Lag surge withstand ceramic body cartridge fuse designed IC specification Features International (IC ) Standards for use

More information

AUML Varistor Series. Surface Mount Varistors

AUML Varistor Series. Surface Mount Varistors The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most common transient condition results from

More information

SF-0603SP150M SF-0603SP200M SF-0603SP250M

SF-0603SP150M SF-0603SP200M SF-0603SP250M E SinglFuse SF-0603SPxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Time Lag fuse n UL 248-14 listed n RoHS compliant* and halogen free** n Multilayer

More information

PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9.

PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9. FETURES PPLITIONS PRT NUMER ESIGNTION P R P - M S M F 0 7 5 / 4 X - E- 9 9 Product name Product number Hold current (I hold) Higher voltage option lankstandard 66 volt rated volt rated 4040 volt rated

More information

MHP-TAM DEVICES. Overtemperature Protection. For Lithium Polymer (LiP) and prismatic cells used in various portable electronic applications

MHP-TAM DEVICES. Overtemperature Protection. For Lithium Polymer (LiP) and prismatic cells used in various portable electronic applications MHP-TM EVIES Overtemperature Protection For Lithium Polymer (LiP) and prismatic cells used in various portable electronic applications MHP-TM EVIES Overtemperature Protection The rapidly expanding market

More information

Features. Continuous ZA Series Units. ) 4 to 460 V DC Voltage Range (V M(DC) ) 5.5 to 615 V Transients: Peak Pulse Current (I TM

Features. Continuous ZA Series Units. ) 4 to 460 V DC Voltage Range (V M(DC) ) 5.5 to 615 V Transients: Peak Pulse Current (I TM ZA Varistor Series RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems.

More information

Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series

Axial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series 229/ 2AG, Slo-Blo Fuse with Indicating Option PS E Description Agency Approvals Agency Agency File Number Ampere Range E10480 250mA - 3.5A LR 29862 250mA - 7A E10480 4A - 7A Littelfuse 229/230 series Slo-Blo

More information

C308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications

C308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Technical Data 4405 Supersedes October 2017 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Agency information curus Recognition file number: E19180, Guide JDYX2/JDYX8 Applications

More information

NTC Thermistor for Automotive: TSM-C Series

NTC Thermistor for Automotive: TSM-C Series Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant

More information

THIS PAGE WAS INTENTIONALLY LEFT BLANK.

THIS PAGE WAS INTENTIONALLY LEFT BLANK. THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...

More information

Specification Status: Released

Specification Status: Released PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released

More information

MF-R/250 Series - Telecom PTC Resettable Fuses

MF-R/250 Series - Telecom PTC Resettable Fuses TV Rheinland Features Radial Leaded Devices High ability to withstand lightning surges Ideal lightning surge coordination device Binned and sorted narrow resistance ranges available Lead free option available

More information

Specification Status: Released

Specification Status: Released PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against

More information

Specification Status: Released

Specification Status: Released PAGE NO.: 1 OF 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against

More information

0.15 +/ (0.006" +/ ) / (0.033" +/ ) / (0.088" +/ ") 1.91 (0.075") 1.09 (0.043") 0.91 (0.

0.15 +/ (0.006 +/ ) / (0.033 +/ ) / (0.088 +/ ) 1.91 (0.075) 1.09 (0.043) 0.91 (0. Note: For wave solder, increase the spacing in both the horizontal Surface Mount Polymeric.66 and Electrostatic +/- vertical.6 dimensions by Discharge Suppressors.54 (.") where denoted by an asterisk (*).4

More information

Radial Leaded PTC Resettable Fuse : FRX F

Radial Leaded PTC Resettable Fuse : FRX F Radial Leaded PTC Resettable Fuse : FRX 050-60F 1. Summary (a) RoHS Compliant (Lead Free) Product (b) Applications: Wide variety of electronic equipment (c) Product Features: Low hold current, Solid state,

More information

TeleLink SM Fuse. CSA Approved File No. LR UL Recognized E Patent Pending. TeleLink SM Fuse. Product Description.

TeleLink SM Fuse. CSA Approved File No. LR UL Recognized E Patent Pending. TeleLink SM Fuse. Product Description. Product Description The TeleLink Surface Mount (SM) surge resistant time lag fuse has been designed to offer the ultimate in circuit protection while meeting the necessary surge requirements of the telecommunications

More information

PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9.

PRCP POLYMER RESETTABLE CIRCUIT PROTECTORS FEATURES APPLICATIONS PART NUMBER DESIGNATION P R C P - M S M F / 2 4 X - 2 E- 9 9. FETURES PPLITIONS PRT NUMER ESIGNTION P R P - M S M F 0 7 5 / 4 X - E- 9 9 Product name Product number Hold current (I hold) Higher voltage option lankstandard 6 6 volt rated 4 4 volt rated0 0 volt rated

More information

MMP - Metal Film MELF

MMP - Metal Film MELF Specifications Per IEC 60115-1 D2 EN140401-803 B L D1 Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high concern

More information

S505SCH 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses

S505SCH 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses Technical Data 10401 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED lighting LED/LCD televisions Appliances

More information

Spezifikation für Freigabe / specification for release

Spezifikation für Freigabe / specification for release Datum / Date : 2007-01-24 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SISE W L T a 402 0.5 1.0 0.6 0.25 603 0.8 1.6 0.9 0.3 805 1.25 2.0 1.2 0.3 1206 1.6 3.2 1.5 0.5 1210 2.5 3.2 1.5 0.5

More information

S J

S J 1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V

More information

GAS DISCHARGE TUBES (GDTS)

GAS DISCHARGE TUBES (GDTS) GAS DISCHARGE TUBES (GDTS) Littelfuse's GDTs (Gas Discharge Tubes) are placed in front of, and in parallel with, sensitive telecom equipment such as power lines, communication lines, signal lines and data

More information

Ceramic PTC Thermistor: PPL Series

Ceramic PTC Thermistor: PPL Series Features 1. RoHS compliant 2. Radial leaded devices 3. Wide resistance range in telecom area from 7 to 50Ω 4. Compliant with ITU-T standards 5. Operating temperature range: 0 ~ +60 C (V=Vmax) -25 ~+125

More information

PTC Thermistor for Automotive:TPM-C Series

PTC Thermistor for Automotive:TPM-C Series Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code

More information

FP1008R5 and FP1008R6 High frequency, high current power inductors

FP1008R5 and FP1008R6 High frequency, high current power inductors Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density

More information

SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES

SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES Table F1 Environmental Specifications for Table F2 Fuses Operating Temperature Mechanical Vibration

More information

Automotive Surface Mount Fuses

Automotive Surface Mount Fuses Revision of November 206 Automotive Surface Mount Fuses Quick Index: Series Size Current Rating (A) Voltage Rating Page 0.5, 0.63, 0.75,.0,.5, 2.0 250VAC/25VDC QA240F 240 QA206F 206 QF206F 206 QF0603F

More information