Compact I/O modules (IP20)

Size: px

Start display at page:

Download "Compact I/O modules (IP20)"

Evan Gilmore
5 years ago
Views:

1 Bus module MBK Thanks to its compact construction, the bus module MBK (IP20) can be easily mounted in shallow control panels, terminal boxes and distribution boxes. The simple construction with the lowest possible plug connections (only field bus and I/O level) makes the system very reliable. Mounting The units can be DIN-rail mounted or screwed to the back plate. Plug in connection technology The connection is via screw or spring clamp plug in terminals, which allows for a fast module change. Coding prevents a mix up in the terminal rows. An extension unit (with 1 or 2 rows of common terminals) can be fitted to the front of the MBK, making additional terminals for 3 or 4 wire sensor connection unnecessary. The extensive use of LEDs on the module or over the field bus to the master helps diagnose and locate faults. Overload protection All outputs and sensor supplies are short-circuit and overload protected. Galvanic separation All the inputs and outputs are optically isolated from the field bus. The separate connections of bus nodes and I/O-sector make it easy, to realize Emergency OFF circuits. Labelling The large exchangeable label strip for the signals and the module can be labelled manually, or with a printer or plotter. Open bus system Murrelektronik supports both Profibus-DP and Interbus with the product range MBK. Module range The wide range of modules has been designed to cover most industrial applications. Certification All units are certified for respective bus system. The modules also work with modules from other bus module manufactures. MBK-P DI16 Page DI32 Page DO16/0,5 A Page DO16/2 A Page DI16 DO16/0,5 A Page MBK-I DI16 Page DI32 Page DO16/0,5 A Page DI16 DO16/0,5 A Page

2 Bus module MBK MBK-P MBK-P Profibus-DP 16 digital inputs 32 digital inputs Input module Ordering data Inputs Screw terminal block Set: 3 pieces Spring clamp terminal block Set: 3 pieces V DC (18 30,2 V), to EN , < 100 ma Profibus-DP Slave Transfer protocol Profibus-DP to DIN EN Freeze-Mode are supported to 12 MBit/s Addressing BCD rotary switch, 3 99 Technical data Inputs 1, 2, 3 or 4-wire, IEC conform 24 V DC (18 30,2 V), to EN , < 1,6 A short-circuit protected, integrated in the label RUN- LED Short-circuit sensor Handbook German disk 3, Handbook English disk 3, GSD/ data disk 3, Bus connector to 12 MBit/s with switchable bus termination resistor Bus connector to 12 MBit/s with switchable bus termination resistor and additional PG socket Profibus cable per meter (1m) Common screw terminal 1 row / 2 row / 3 row Common spring clamp terminal 1 row / 2 row / 3 row

3 Bus module MBK MBK-P DO16/0.5 A MBK-P DO16/2 A Profibus-DP 16 digital output 0,5 A 16 digital output 2 A Output module Ordering data Outputs Screw terminal block Set: 3 pieces Spring clamp terminal block Set: 3 pieces DIN-rail mounting to DIN EN 50022, or screw fixing 24 V DC (18 30,2 V), to DIN EN , < 100 ma Profibus-DP Slave Transfer protocol Profibus-DP to DIN EN Sync-Mode are supported to 12 MBit/s Addressing BCD rotary switch, 3 99 Technical data Outputs p-switching, 2- or 3 wire connection 24 V DC (18 30,2 V), to DIN EN , I 8 A 24 V DC (18 30,2 V), to DIN EN , I 32 A Switching current 0,5 A per output, short-circuit and overload protected 2 A per output, short-circuit and overload protected Filament lamp load 2 W per output 10 W per output Max switching frequency at ohmic: 100 Hz; inductive load: 1 4 Hz (dependent on current load per output) RUN- LED in the label, each channel individually Handbook German disk 3, Handbook English disk 3, GSD/ data disk 3, Bus connector to 12 MBit/s with switchable bus termination resistor Bus connector to 12 MBit/s with switchable bus termination resistor and additional PG socket Profibus cable per meter (1m)

4 Bus module MBK Profibus-DP MBK-P 16 digital inputs/outputs 0,5 A Input/output module Ordering data 16 digital inputs/outputs 0,5 A Screw terminal block Set: 3 pieces Spring clamp terminal block Set: 3 pieces V DC (18 30,2 V), to DIN EN , < 100 ma Profibus-DP Slave Transfer protocol Profibus-DP to DIN EN Sync- and Freeze-Mode are supported to 12 MBit/s Addressing BCD rotary switch, 3 99 Technical data Inputs 1, 2, 3 or 4 wire, IEC conform 24 V DC (18 30,2 V), to DIN EN , < 1,6 A Technical data Outputs p-switching, 2- or 3 wire connection 24 V DC (18 30,2 V), to DIN EN , I 8 A Switching current 0,5 A per output, short-circuit and overload protected Filament lamp load 2 W per output Max switching frequency at ohmic: 100 Hz; inductive load: 1 4 Hz (dependent on current load per output) RUN- LED in the label Short-circuit sensor LED integrated in the label and combined alarm to the Master Handbook German disk 3, Handbook English disk 3, GSD/ data disk 3, Bus connector to 12 MBit/s with switchable bus termination resistor Bus connector to 12 MBit/s with switchable bus termination resistor and additional PG socket Profibus cable per meter (1m) Common screw terminal 1 row / 2 row / 3 row Common spring clamp terminal 1 row / 2 row / 3 row

5 Bus module MBK MBK-I MBK-I INTERBUS 16 digital inputs 32 digital inputs Input module Ordering data Inputs Screw terminal block Set: 3 pieces Spring clamp terminal block Set: 3 pieces V DC (18 30,2 V), to DIN EN , < 100 ma INTERBUS Slave Transfer protocol INTERBUS to DIN EN Freeze-Mode are supported 500 kbit/s Technical data Inputs 1, 2, 3 or 4 wire, IEC conform 24 V DC (18 30,2 V), to DIN EN , < 1,6 A short-circuit protected RUN- LED in the label Short-circuit sensor LED integrated in the label and combined alarm to the master Handbook German Handbook English Bus connector set Sub-D 9-pole each with a field wire male and female Remote bus cable manufactured with 2 x Sub-D connector, length 30 cm Remote bus cable per meter (1m) Common screw terminal 1 row / 2 row / 3 row Common spring clamp terminal 1 row / 2 row / 3 row

6 Bus module MBK INTERBUS MBK-I Output module Ordering data 16 digital output 0,5 A Screw terminal block Set: 3 pieces Spring clamp terminal block Set: 3 pieces V DC (18 30,2 V), to DIN EN , < 100 ma; INTERBUS Slave Transfer protocol INTERBUS to DIN EN Sync-Mode are supported 500 kbit/s Technical data Outputs p-switching, 2- or 3 wire connection 24 V DC (18 30,2 V), to DIN EN , I 8 A Switching current 0,5 A per output, short-circuit and overload protected Filament lamp load 2 W per output Max switching frequency at ohmic: 100 Hz; inductive load: 1 4 Hz (dependent on current load per output) RUN- LED in the label LED in the label and alarm to master LED in the label and alarm to master and combined alarm to the master, each channel individually Handbook German Handbook English Bus connector set Sub-D 9-pole each with a field wire male and female Remote bus cable manufactured with 2 x Sub-D connector, length 30 cm Remote bus cable per meter (1m)

7 Bus module MBK MBK-I MBK-I MBK-I MBK-I INTERBUS I/O combined and single channels., I/O combined and single channels., I/O combined diagnosis, without I/O diagnosis, in/outputs 16 bit inputs 16 bit, outputs 2x8 bit inputs 16 bit, outputs 2x8 bit inputs 16 bit, outputs 2x8 bit Input/Output module Ordering data 16 digital inputs/outputs 0,5 A Screw terminal block Set: 3 pieces Spring clamp terminal block Set: 3 pieces V DC (18 30,2 V), to DIN EN , < 100 ma INTERBUS Slave Transfer protocol INTERBUS to DIN EN Sync- and Freeze-Mode are supported 500 kbit/s Technical data Inputs 1, 2, 3 or 4 wire, IEC conform 24 V DC (18 30,2 V), to DIN EN , < 1,6 A short-circuit protected Technical data Outputs p-switching, 2- or 3 wire connection 24 V DC (18 30,2 V), to DIN EN , I 8 A Switching current 0,5 A per output, short-circuit and overload protected Filament lamp load 2 W per output Max switching frequency at ohmic: 100 Hz; inductive load: 1 4 Hz (dependent on current load per output) LEDs in the label LED in the label, alarm to master optional Short-circuit sensor LED in the label, combined alarm to master optional LED in the label, alarm to master optional Handbook German Handbook English Bus connector set Sub-D 9-pole each with a field wire male and female Remote bus cable manufactured with 2 x Sub-D connector, length 30 cm Remote bus cable per meter (1m) Common screw terminal 1 row / 2 row / 3 row Common spring clamp terminal 1 row / 2 row / 3 row

8 Connection diagram MBK-I DI16 ( 55410) MBK-P DI16 ( 55400) MBK-I MBK-P DI32 ( 55411) with 3 row common terminals DI32 ( 55401) with 3 row common terminals 24 V DC Modulstromversorgung 24 V DC Sensorstromversorgung current supply Sensor UI UI U INT I PE PE PE PE 24 V DC für for other weitere modules Module 24 V DC Sensorstromversorgung Sensor current für supply weitere for Module other modules x4 24 V DC Modulstromversorgung 24 V DC Sensorstromversorgung current supply UI UI U INT PE PE Us Us 24 V DC Sensorstromversorgung Sensor current für supply weitere for Mod other modules 24 V DC für for weitere other modules Modu für for weitere other modules Module S + - S + - x5 Sensor 1 Sensor 16 x6 S + - S + - S + - Sensor 1 S + - Sensor 16 Sensor 17 Sensor 32 MBK-I DO16/0,5 A ( 55412) MBK-P DO16/0,5 A ( 55402) 24 V DC Modulstromversorgung 24 V DC Aktorstromversorgung Actuator current supplyaktor V DC Aktorstromversorgung Actuator current supply Aktor 1 8 MBK-P DO16/2 A ( 55403) 24 V DC Aktorstromversorgung Actuator current supply Aktor V DC Aktorstromversorgung Actuator current supply Aktor V DC Aktorstromversorgung Actuator current supply Aktor V DC Actuator Aktorstromversorgung current supply Aktor U1 U2 U INT 24 V DC für for weitere other modules Module U1 U2 U3 U PE PE PE PE PE PE OV U INT 24 V DC Modulversorgung Aktor 1 Aktor 16 Aktor 1 Aktor 16 MBK-I MBK-P DI16 DO16/0,5 A ( 55414) with 3 row common terminals DI16 DO16/0,5 A ( 55405) with 3 row common terminals MBK-I DI16 DO16/0,5 A ( 55417, 55418, 55419) with 3 row common terminals 24 V DC Modulstromversorgung 24 V DC Sensorstromversorgung current supply Sensor V DC Aktorstromversorgung Actuator current supply Aktor V DC Sensor/Modulstromversorgung Sensor/ 24 V DC Aktorstromversorgung Actuator current supply Aktor V DC Aktorstromversorgung Actuator current supply Aktor UO UI U INT 24 V DC für for weitere other modules Module für for weitere other modules Module U1 U2 UI INT 24 V DC für for weitere other modules Mod für for weitere other modules Module PE PE Us Us PE PE Us Us x4 x4 x5 x5 x6 x6 Aktor 1 Aktor 16 Aktor 1 Aktor 16 S + - S + - S + - S Sensor 1 Sensor 16 Sensor 1 Sensor 16

9 Dimensions drawing Fixing holes Ø 4,6 mm = M4 Screws Common terminals for switching additional potentials ,2 40,5 126 mm 29 mm 1 row 29 mm row 41,25 mm 3 row 2.3.9

T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators

T 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators T 365 EN Type 365 Solenoid Valve Island To control pneumatic actuators Application The Type 365 Solenoid Valve Island is a compact solution for the central control of pneumatic actuators in chemical and